The DPHY spec requires a much larger T_INIT than I was specifying
before. In the absence of clear specs from the slave of what their
timing is, just use the value that the firmware was using.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627195839.3338-2-eric@anholt.net
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
This patch adds helper functions for YCBCR 420 handling.
These functions do:
- check if a given video mode is YCBCR 420 only mode.
- check if a given video mode is YCBCR 420 also mode.
V2: Added YCBCR functions as helpers in DRM layer, instead of
keeping it in I915 layer.
V3: Added handling for YCBCR-420 only modes too.
V4: EXPORT_SYMBOL(drm_find_hdmi_output_type)
V5: Addressed review comments from Danvet:
- %s/drm_find_hdmi_output_type/drm_display_info_hdmi_output_type
- %s/drm_can_support_ycbcr_output/drm_display_supports_ycbcr_output
- %s/drm_can_support_this_ycbcr_output/
drm_display_supports_this_ycbcr_output
- pass drm_display_info instead of drm_connector for consistency
- For drm_get_highest_quality_ycbcr_supported doc, move the variable
description above, and then the function description.
V6: Add only YCBCR420 helpers (Ville)
V7: Addressed review comments from Ville
- Remove cea_vic_valid() check.
- Fix indentation.
- Make input parameters to helpers, const.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-9-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F spec adds ycbcr420 deep color support information
in hf-vsdb block. This patch extends the existing hf-vsdb parsing
function by adding parsing of ycbcr420 deep color support from the
EDID and adding it into display information stored.
V2: Rebase
V3: Rebase
V4: Moved definition of y420_dc_modes into this patch, where its used
(Ville)
V5: Optimize function, if(conditions) not reqd (Ville)
V6: Rebase
V7: Rebase
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-8-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
CEA-861-F adds two new blocks in EDID's CEA extension blocks,
to provide information about sink's YCBCR420 output capabilities.
These blocks are:
- YCBCR420vdb(YCBCR 420 video data block):
This block contains VICs of video modes, which can be sopported only
in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
SVD block, valid for YCBCR420 modes only.
- YCBCR420cmdb(YCBCR 420 capability map data block):
This block gives information about video modes which can support
YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
block contains a bitmap index of normal svd videomodes, which can
support YCBCR420 output too.
So if bit 0 from first vcb byte is set, first video mode in the svd
list can support YCBCR420 output too. Bit 1 means second video mode
from svd list can support YCBCR420 output too, and so on.
This patch adds two bitmaps in display's hdmi_info structure, one each
for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
adds:
- VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
an entry in the vdb_bitmap per vic.
- VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
V2: Addressed
Review comments from Emil:
- Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
- Use the suggested method for updating dbmap.
- Add documentation for YCBCR420_vcb_map to fix kbuild warning.
Review comments from Ville:
- Do not expose the YCBCR420 flags in uabi layer, keep it internal.
- Save a map of YCBCR420 modes for future reference.
- Check db length before trying to parse extended tag.
- Add a warning if there are > 64 modes in capability map block.
- Use y420cmdb in function names and macros while dealing with vcb
to be aligned with spec.
- Move the display information parsing block ahead of mode parsing
blocks.
V3: Addressed design/review comments from Ville
- Do not add flags in video modes, else we have to expose them to user
- There should not be a UABI change, and kernel should detect the
choice of the output based on type of mode, and the bitmaps.
- Use standard bitops from kernel bitmap header, instead of calculating
bit positions manually.
V4: Addressed review comments from Ville:
- s/ycbcr_420_vdb/y420vdb
- s/ycbcr_420_vcb/y420cmdb
- Be less verbose on description of do_y420vdb_modes
- Move newmode variable in the loop scope.
- Use svd_to_vic() to get a VIC, instead of 0x7f
- Remove bitmap description for CMDB modes & VDB modes
- Dont add connector->ycbcr_420_allowed check for cmdb modes
- Remove 'len' variable, in is_y420cmdb function, which is used
only once
- Add length check in is_y420vdb function
- Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
- Do not add print about YCBCR 420 modes
- Fix indentation in few places
- Move ycbcr420_dc_modes in next patch, where its used
- Add a separate patch for movement of drm_add_display_info()
V5: Addressed review comments from Ville:
- Add the patch which cleans up the current EXTENDED_TAG usage
- Make y420_cmdb_map u64
- Do not block ycbcr420 modes while parsing the EDID, rather
add a separate helper function to prune ycbcr420-only modes from
connector's probed modes.
V6: Rebase
V7: Move this patch after the 420_only validation patch (Ville)
V8: Addressed review comments from Ville
- use cea_vic_valid check before adding cmdb/vdb modes
- add check for i < 64 while adding cmdb modes
- use 1ULL while checking bitmap
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1500028426-14883-1-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix checkpatch complaints and indentation]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
YCBCR420 modes are supported only on HDMI 2.0 capable sources.
This patch adds:
- A drm helper to validate YCBCR420-only mode on a particular
connector. This function will help pruning the YCBCR420-only
modes from the connector's modelist.
- A bool variable (ycbcr_420_allowed) in the drm connector structure.
While handling the EDID from HDMI 2.0 sinks, its important to know
if the source is capable of handling YCBCR420 output, so that no
YCBCR 420 modes will be listed for sources which can't handle it.
A driver should set this variable if it wants to see YCBCR420 modes
in the modedb.
V5: Introduced the patch in series.
V6: Squashed two patches (validate YCBCR420 and add YCBCR420
identifier)
V7: Addressed review comments from Vile:
- Move this patch before we add 420 modes from EDID.
- No need for drm_valid_cea_vic() check, function back to non-static.
- Update MODE_STATUS with NO_420 condition.
- Introduce y420_vdb_modes variable in this patch
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-6-git-send-email-shashank.sharma@intel.com
[vsyrjala: Drop the now bogus EXPORT_SYMBOL(drm_valid_cea_vic)]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F introduces extended tag codes for EDID extension blocks,
which indicates the actual type of the data block. The code for
using exteded tag is 0x7, whereas in the existing code, the
corresponding macro is named as "VIDEO_CAPABILITY_BLOCK"
This patch renames the macro and usages from "VIDEO_CAPABILITY_BLOCK"
to "USE_EXTENDED_TAG"
V2: Add extended tag code check for video capabilitiy block (ville)
V3: Ville:
- Use suggested names for macros
- Check the block length first, before checking the extended tag
V4: Fix commit message (David)
V5: Introduced this patch into HDMI-YCBCR-output series
V6: Rebase
V7: Rebase
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-5-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks.
This block contains a map of indexes of CEA modes, which can
support YCBCR 420 output also. To avoid multiple parsing of same
CEA block, let's parse the sink information and get this map, before
parsing CEA modes.
This patch moves the call to drm_add_display_info function, before the
mode parsing block.
V4: Introduced new patch in the series
V5: Move this patch before 4:2:0 parsing patch (ville)
Added r-b from Ville
V6: Rebase
V7: Rebase
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-4-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
CEA-861-F specs defines new video modes to be used with
HDMI 2.0 EDIDs. The VIC range has been extended from 1-64 to
1-107.
Our existing CEA modedb contains only 64 modes (VIC=1 to VIC=64). Now
to be able to parse new CEA modes using the existing methods, we have
to complete the modedb (VIC=65 onwards).
This patch adds:
- Timings for existing CEA video modes (from VIC=65 till VIC=92)
- Newly added 4k modes (from VIC=93 to VIC=107).
The patch was originaly discussed and reviewed here:
https://patchwork.freedesktop.org/patch/135810/
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
V2: Rebase
V3: Rebase
V4: Added native bit handling as per CEA-861-F spec (Ville)
V5: Fix timings for VIC 77:1920x1080 and 104:3840x2160p (Ville)
Remove unnecessary paranthesis from function svd_to_vic (Ville)
Added r-b (Neil)
V6: Rebase
V7: Fix indentation for modes from VIC 80
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-3-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix up remaining formatting/indentation issues]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This adds support for the Pervasive Displays RePaper branded displays.
The controller code is taken from the userspace driver available
through repaper.org. Only the V231 film is supported since the others
are EOL.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496934875-51984-5-git-send-email-noralf@tronnes.org
The legacy path implements setcmap in terms of crtc .gamma_set.
The atomic path implements setcmap by directly updating the crtc gamma_lut
property.
This has a couple of benefits:
- it makes the redundant fb helpers .load_lut, .gamma_set and .gamma_get
completely obsolete. They are now unused and subject for removal.
- atomic drivers that support clut modes get fbdev support for those from
the drm core. This includes atmel-hlcdc, but perhaps others as well?
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-4-peda@axentia.se
The function has little to do with atomic, it's just where it has so
far been needed. So, rename it to drm_property_replace_blob, move it
to drm_property.c and export it.
Change the semantics to return whether the blob was replaced instead
of using an extra argument for that.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-2-peda@axentia.se
Make the atomic private object stuff less special by introducing proper
base classes for the object and its state. Drivers can embed these in
their own appropriate objects, after which these things will work
exactly like the plane/crtc/connector states during atomic operations.
v2: Reorder to not depend on drm_dynarray (Daniel)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-3-ville.syrjala@linux.intel.com
for_each_obj_in_state is about to be removed, so use the new atomic
iterator macros.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-13-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
for_each_obj_in_state is about to be removed, so use the new iterator
macros.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-12-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
for_each_obj_in_state is about to be removed, so use the new iterator
macros.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-9-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
I don't think the checking of resources in this function is very
atomic-like, but it should definitely not use a macro that's about
to be removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-6-maarten.lankhorst@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[mlankhorst: Make function static (danvet)]
for_each_obj_in_state is about to be removed, so use the correct new
iterator macro.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-5-maarten.lankhorst@linux.intel.com
[mlankhorst: Based on danvet's feedback, only apply first hunk and rename crtc_state variable to unused]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
for_each_obj_in_state will be removed, so don't use it here.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
for_each_obj_in_state will be removed, so use the new state here.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-3-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
You can enable the CRTC and without adding the plane to the state and
it will succeed. This should be prevented in the crtc check instead of
the plane check, because the plane check may never run for atomic
enable, but the crtc check always will.
This is based on a similar check in vmwgfx.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the DRM core fails to init for whatever reason, ensure that
no driver ever calls drm_dev_register().
This is best done at drm_dev_init() as it covers drivers that call
drm_dev_alloc() as well as drivers that prefer to embed struct
drm_device into their own device struct and call drm_dev_init()
themselves.
In my case I had so many dynamic device majors used that the major
number for DRM (226) was stolen, causing DRM core init to fail after
failing to register a chrdev, and ultimately calling debugfs_remove()
on drm_debugfs_root in drm_core_exit().
After drm core failed to init, VGEM was still calling drm_dev_register(),
ultimately leading to drm_debugfs_init(), with drm_debugfs_root passed
as the root for the new debugfs dir at debugfs_create_dir().
This led to a kernel panic once we were either derefencing root->d_inode
while it was NULL or calling root->d_inode->i_op->lookup() while it was
NULL in debugfs at inode_lock() or lookup_*().
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170708214352.GA27205@gmail.com
I think the gamma_store can end up invalid on error. But the way I read
it, that can happen in drm_mode_gamma_set_ioctl as well, so why should
this pesky legacy fbdev stuff be any better?
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-3-git-send-email-peda@axentia.se
Like with panning and modesetting, and like with those, stick with
simple drm_modeset_locking_all for the legacy path, and the full
atomic dance for atomic drivers.
This means a bit more boilerplate since setting up the atomic state
machinery is rather verbose, but then this is shared code for 30+
drivers or so, so meh.
After this patch there's only the LUT/cmap path which is still using
drm_modeset_lock_all for an atomic driver. But Peter is already
locking into reworking that, so I'll leave that code as-is for now.
v2: Squash in patches from Maarten to unify all the various atomic
paths into just one atomic update function for fbdev overall. On top
do one s/restore_fbdev_mode/restore_fbdev_mode_atomic/ so that we have
all-atomic callchains after the first check.
Cc: Peter Rosin <peda@axentia.se>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-10-daniel.vetter@ffwll.ch
Those are now all protected using fb_helper->lock.
v2: We still need to hold mode_config.mutex right around calling
connector->fill_modes.
v3: I forgot to hold mode_config.mutex while looking at
connector->status and the mode list. Also, we need to patch up the
i915 ->initial_config callback to grab the locks it needs to inspect
the modeset state recovered from the fw.
v4: Don't reorder the probe too much (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705045629.31265-1-daniel.vetter@ffwll.ch
Same game as with the panning function, use drm_modeset_lock_all for
legacy paths, and a proper acquire ctx w/w mutex dance for atomic.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-8-daniel.vetter@ffwll.ch
For the legacy path we'll keep drm_modeset_lock_all, for the atomic
one we drop the use of the magic implicit context and wire it up
properly.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-7-daniel.vetter@ffwll.ch
Like with the drm-native vblank wait ioctl we can entirely rely on the
spinlocks in drm_vblank.c, no need at all to take expensive mutexes.
The only reason we had to take mode_config.mutex was to protect the
fbdev helper's data-structures, but that's now done by
fb_helper->lock.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-6-daniel.vetter@ffwll.ch
That function only needs to take the individual crtc locks, not all
the kms locks. Push down the locking and then minimize it.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-5-daniel.vetter@ffwll.ch
Eric Anholt