We will add a new "compress_mode" mount option to control file
compression mode. This supports "fs" and "user". In "fs" mode (default),
f2fs does automatic compression on the compression enabled files.
In "user" mode, f2fs disables the automaic compression and gives the
user discretion of choosing the target file and the timing. It means
the user can do manual compression/decompression on the compression
enabled files using ioctls.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
WARN_ON() already contains an unlikely(), so it's not necessary
to use unlikely.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For multi-device case, one f2fs image includes multi devices, so it
needs to account bytes written of all block devices belong to the image
rather than one main block device, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to store chksum value with compressed
data, and verify the integrality of compressed data while
reading the data.
The feature can be enabled through specifying mount option
'compress_chksum'.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Lei Li reported a issue: if foreground operations are frequent, background
checkpoint may be always skipped due to below check, result in losing more
data after sudden power-cut.
f2fs_balance_fs_bg()
...
if (!is_idle(sbi, REQ_TIME) &&
(!excess_dirty_nats(sbi) && !excess_dirty_nodes(sbi)))
return;
E.g:
cp_interval = 5 second
idle_interval = 2 second
foreground operation interval = 1 second (append 1 byte per second into file)
In such case, no matter when it calls f2fs_balance_fs_bg(), is_idle(, REQ_TIME)
returns false, result in skipping background checkpoint.
This patch changes as below to make trigger condition being more reasonable:
- trigger sync_fs() if dirty_{nats,nodes} and prefree segs exceeds threshold;
- skip triggering sync_fs() if there is any background inflight IO or there is
foreground operation recently and meanwhile cp_rwsem is being held by someone;
Reported-by: Lei Li <noctis.akm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use rwsem to ensure serialization of the callers and to avoid
starvation of high priority tasks, when the system is under
heavy IO workload.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Expand f2fs's casefolding support to include encrypted directories. To
index casefolded+encrypted directories, we use the SipHash of the
casefolded name, keyed by a key derived from the directory's fscrypt
master key. This ensures that the dirhash doesn't leak information
about the plaintext filenames.
Encryption keys are unavailable during roll-forward recovery, so we
can't compute the dirhash when recovering a new dentry in an encrypted +
casefolded directory. To avoid having to force a checkpoint when a new
file is fsync'ed, store the dirhash on-disk appended to i_name.
This patch incorporates work by Eric Biggers <ebiggers@google.com>
and Jaegeuk Kim <jaegeuk@kernel.org>.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This shifts the responsibility of setting up dentry operations from
fscrypt to the individual filesystems, allowing them to have their own
operations while still setting fscrypt's d_revalidate as appropriate.
Most filesystems can just use generic_set_encrypted_ci_d_ops, unless
they have their own specific dentry operations as well. That operation
will set the minimal d_ops required under the circumstances.
Since the fscrypt d_ops are set later on, we must set all d_ops there,
since we cannot adjust those later on. This should not result in any
change in behavior.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Like other filesystem does, we introduce a new file f2fs.h in path of
include/uapi/linux/, and move f2fs-specified ioctl interface definitions
to that file, after then, in order to use those definitions, userspace
developer only need to include the new header file rather than
copy & paste definitions from fs/f2fs/f2fs.h.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've added new features such as zone capacity for ZNS and
a new GC policy, ATGC, along with in-memory segment management. In addition,
we could improve the decompression speed significantly by changing virtual
mapping method. Even though we've fixed lots of small bugs in compression
support, I feel that it becomes more stable so that I could give it a try in
production.
Enhancement:
- suport zone capacity in NVMe Zoned Namespace devices
- introduce in-memory current segment management
- add standart casefolding support
- support age threshold based garbage collection
- improve decompression speed by changing virtual mapping method
Bug fix:
- fix condition checks in some ioctl() such as compression, move_range, etc
- fix 32/64bits support in data structures
- fix memory allocation in zstd decompress
- add some boundary checks to avoid kernel panic on corrupted image
- fix disallowing compression for non-empty file
- fix slab leakage of compressed block writes
In addition, it includes code refactoring for better readability and minor
bug fixes for compression and zoned device support.
-----BEGIN PGP SIGNATURE-----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=exgv
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added new features such as zone capacity for ZNS
and a new GC policy, ATGC, along with in-memory segment management. In
addition, we could improve the decompression speed significantly by
changing virtual mapping method. Even though we've fixed lots of small
bugs in compression support, I feel that it becomes more stable so
that I could give it a try in production.
Enhancements:
- suport zone capacity in NVMe Zoned Namespace devices
- introduce in-memory current segment management
- add standart casefolding support
- support age threshold based garbage collection
- improve decompression speed by changing virtual mapping method
Bug fixes:
- fix condition checks in some ioctl() such as compression, move_range, etc
- fix 32/64bits support in data structures
- fix memory allocation in zstd decompress
- add some boundary checks to avoid kernel panic on corrupted image
- fix disallowing compression for non-empty file
- fix slab leakage of compressed block writes
In addition, it includes code refactoring for better readability and
minor bug fixes for compression and zoned device support"
* tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: code cleanup by removing unnecessary check
f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
f2fs: fix writecount false positive in releasing compress blocks
f2fs: introduce check_swap_activate_fast()
f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case
f2fs: handle errors of f2fs_get_meta_page_nofail
f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode
f2fs: reject CASEFOLD inode flag without casefold feature
f2fs: fix memory alignment to support 32bit
f2fs: fix slab leak of rpages pointer
f2fs: compress: fix to disallow enabling compress on non-empty file
f2fs: compress: introduce cic/dic slab cache
f2fs: compress: introduce page array slab cache
f2fs: fix to do sanity check on segment/section count
f2fs: fix to check segment boundary during SIT page readahead
f2fs: fix uninit-value in f2fs_lookup
f2fs: remove unneeded parameter in find_in_block()
f2fs: fix wrong total_sections check and fsmeta check
f2fs: remove duplicated code in sanity_check_area_boundary
f2fs: remove unused check on version_bitmap
...
First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on
f2fs_get_meta_page_nofail().
Quick fix was not to give any error with infinite loop, but syzbot caught
a case where it goes to that loop from fuzzed image. In turned out we abused
f2fs_get_meta_page_nofail() like in the below call stack.
- f2fs_fill_super
- f2fs_build_segment_manager
- build_sit_entries
- get_current_sit_page
INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
stack:26960 pid: 6870 ppid: 6869 flags:0x00004006
Call Trace:
Showing all locks held in the system:
1 lock held by khungtaskd/1179:
#0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
#0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
#0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229
Actually, we didn't have to use _nofail in this case, since we could return
error to mount(2) already with the error handler.
As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().
Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In 32bit system, 64-bits key breaks memory alignment.
This fixes the commit "f2fs: support 64-bits key in f2fs rb-tree node entry".
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add two slab caches: "f2fs_cic_entry" and "f2fs_dic_entry" for memory
allocation of compress_io_ctx and decompress_io_ctx structure.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The behavior of the test_dummy_encryption mount option is that when a
new file (or directory or symlink) is created in an unencrypted
directory, it's automatically encrypted using a dummy encryption policy.
That's it; in particular, the encryption (or lack thereof) of existing
files (or directories or symlinks) doesn't change.
Unfortunately the implementation of test_dummy_encryption is a bit weird
and confusing. When test_dummy_encryption is enabled and a file is
being created in an unencrypted directory, we set up an encryption key
(->i_crypt_info) for the directory. This isn't actually used to do any
encryption, however, since the directory is still unencrypted! Instead,
->i_crypt_info is only used for inheriting the encryption policy.
One consequence of this is that the filesystem ends up providing a
"dummy context" (policy + nonce) instead of a "dummy policy". In
commit ed318a6cc0 ("fscrypt: support test_dummy_encryption=v2"), I
mistakenly thought this was required. However, actually the nonce only
ends up being used to derive a key that is never used.
Another consequence of this implementation is that it allows for
'inode->i_crypt_info != NULL && !IS_ENCRYPTED(inode)', which is an edge
case that can be forgotten about. For example, currently
FS_IOC_GET_ENCRYPTION_POLICY on an unencrypted directory may return the
dummy encryption policy when the filesystem is mounted with
test_dummy_encryption. That seems like the wrong thing to do, since
again, the directory itself is not actually encrypted.
Therefore, switch to a more logical and maintainable implementation
where the dummy encryption policy inheritance is done without setting up
keys for unencrypted directories. This involves:
- Adding a function fscrypt_policy_to_inherit() which returns the
encryption policy to inherit from a directory. This can be a real
policy, a dummy policy, or no policy.
- Replacing struct fscrypt_dummy_context, ->get_dummy_context(), etc.
with struct fscrypt_dummy_policy, ->get_dummy_policy(), etc.
- Making fscrypt_fname_encrypted_size() take an fscrypt_policy instead
of an inode.
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Convert f2fs to use the new functions fscrypt_prepare_new_inode() and
fscrypt_set_context(). This avoids calling
fscrypt_get_encryption_info() from under f2fs_lock_op(), which can
deadlock because fscrypt_get_encryption_info() isn't GFP_NOFS-safe.
For more details about this problem, see the earlier patch
"fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()".
This also fixes a f2fs-specific deadlock when the filesystem is mounted
with '-o test_dummy_encryption' and a file is created in an unencrypted
directory other than the root directory:
INFO: task touch:207 blocked for more than 30 seconds.
Not tainted 5.9.0-rc4-00099-g729e3d0919844 #2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:touch state:D stack: 0 pid: 207 ppid: 167 flags:0x00000000
Call Trace:
[...]
lock_page include/linux/pagemap.h:548 [inline]
pagecache_get_page+0x25e/0x310 mm/filemap.c:1682
find_or_create_page include/linux/pagemap.h:348 [inline]
grab_cache_page include/linux/pagemap.h:424 [inline]
f2fs_grab_cache_page fs/f2fs/f2fs.h:2395 [inline]
f2fs_grab_cache_page fs/f2fs/f2fs.h:2373 [inline]
__get_node_page.part.0+0x39/0x2d0 fs/f2fs/node.c:1350
__get_node_page fs/f2fs/node.c:35 [inline]
f2fs_get_node_page+0x2e/0x60 fs/f2fs/node.c:1399
read_inline_xattr+0x88/0x140 fs/f2fs/xattr.c:288
lookup_all_xattrs+0x1f9/0x2c0 fs/f2fs/xattr.c:344
f2fs_getxattr+0x9b/0x160 fs/f2fs/xattr.c:532
f2fs_get_context+0x1e/0x20 fs/f2fs/super.c:2460
fscrypt_get_encryption_info+0x9b/0x450 fs/crypto/keysetup.c:472
fscrypt_inherit_context+0x2f/0xb0 fs/crypto/policy.c:640
f2fs_init_inode_metadata+0xab/0x340 fs/f2fs/dir.c:540
f2fs_add_inline_entry+0x145/0x390 fs/f2fs/inline.c:621
f2fs_add_dentry+0x31/0x80 fs/f2fs/dir.c:757
f2fs_do_add_link+0xcd/0x130 fs/f2fs/dir.c:798
f2fs_add_link fs/f2fs/f2fs.h:3234 [inline]
f2fs_create+0x104/0x290 fs/f2fs/namei.c:344
lookup_open.isra.0+0x2de/0x500 fs/namei.c:3103
open_last_lookups+0xa9/0x340 fs/namei.c:3177
path_openat+0x8f/0x1b0 fs/namei.c:3365
do_filp_open+0x87/0x130 fs/namei.c:3395
do_sys_openat2+0x96/0x150 fs/open.c:1168
[...]
That happened because f2fs_add_inline_entry() locks the directory
inode's page in order to add the dentry, then f2fs_get_context() tries
to lock it recursively in order to read the encryption xattr. This
problem is specific to "test_dummy_encryption" because normally the
directory's fscrypt_info would be set up prior to
f2fs_add_inline_entry() in order to encrypt the new filename.
Regardless, the new design fixes this test_dummy_encryption deadlock as
well as potential deadlocks with fs reclaim, by setting up any needed
fscrypt_info structs prior to taking so many locks.
The test_dummy_encryption deadlock was reported by Daniel Rosenberg.
Reported-by: Daniel Rosenberg <drosen@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20200917041136.178600-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
The returned integer is not required anywhere. So we need to change
the return value to bool type.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
writepages() can be concurrently invoked for the same file by different
threads such as a thread fsyncing the file and a kworker kernel thread.
So, changing i_compr_blocks without protection is racy and we need to
protect it by changing it with atomic type value. Plus, we don't need
a 64bit value for i_compr_blocks, so just we will use a atomic value,
not atomic64.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As 5kft <5kft@5kft.org> reported:
kworker/u9:3: page allocation failure: order:9, mode:0x40c40(GFP_NOFS|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 3 PID: 8168 Comm: kworker/u9:3 Tainted: G C 5.8.3-sunxi #trunk
Hardware name: Allwinner sun8i Family
Workqueue: f2fs_post_read_wq f2fs_post_read_work
[<c010d6d5>] (unwind_backtrace) from [<c0109a55>] (show_stack+0x11/0x14)
[<c0109a55>] (show_stack) from [<c056d489>] (dump_stack+0x75/0x84)
[<c056d489>] (dump_stack) from [<c0243b53>] (warn_alloc+0xa3/0x104)
[<c0243b53>] (warn_alloc) from [<c024473b>] (__alloc_pages_nodemask+0xb87/0xc40)
[<c024473b>] (__alloc_pages_nodemask) from [<c02267c5>] (kmalloc_order+0x19/0x38)
[<c02267c5>] (kmalloc_order) from [<c02267fd>] (kmalloc_order_trace+0x19/0x90)
[<c02267fd>] (kmalloc_order_trace) from [<c047c665>] (zstd_init_decompress_ctx+0x21/0x88)
[<c047c665>] (zstd_init_decompress_ctx) from [<c047e9cf>] (f2fs_decompress_pages+0x97/0x228)
[<c047e9cf>] (f2fs_decompress_pages) from [<c045d0ab>] (__read_end_io+0xfb/0x130)
[<c045d0ab>] (__read_end_io) from [<c045d141>] (f2fs_post_read_work+0x61/0x84)
[<c045d141>] (f2fs_post_read_work) from [<c0130b2f>] (process_one_work+0x15f/0x3b0)
[<c0130b2f>] (process_one_work) from [<c0130e7b>] (worker_thread+0xfb/0x3e0)
[<c0130e7b>] (worker_thread) from [<c0135c3b>] (kthread+0xeb/0x10c)
[<c0135c3b>] (kthread) from [<c0100159>]
zstd may allocate large size memory for {,de}compression, it may cause
file copy failure on low-end device which has very few memory.
For decompression, let's just allocate proper size memory based on current
file's cluster size instead of max cluster size.
Reported-by: 5kft <5kft@5kft.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Current compr_blocks of superblock info is not 64bit value. We are
accumulating each i_compr_blocks count of inodes to this value and
those are 64bit values. So, need to change this to 64bit value.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This switches f2fs over to the generic support provided in
the previous patch.
Since casefolded dentries behave the same in ext4 and f2fs, we decrease
the maintenance burden by unifying them, and any optimizations will
immediately apply to both.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
refcount_t type variable should never be less than one, so it's a
little bit hard to understand when we use it to indicate pending
compressed page count, let's change to use atomic_t for better
readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
then, we can add specified entry into rb-tree with 64-bits segment time
as key.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't let f2fs inner GC ruins original aging degree of segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since DUMMY_WRITTEN_PAGE and ATOMIC_WRITTEN_PAGE have already been
converted as unsigned long type, we don't need do type casting again.
Signed-off-by: Xiaojun Wang <wangxiaojun11@huawei.com>
Reported-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
NVMe Zoned Namespace devices can have zone-capacity less than zone-size.
Zone-capacity indicates the maximum number of sectors that are usable in
a zone beginning from the first sector of the zone. This makes the sectors
sectors after the zone-capacity till zone-size to be unusable.
This patch set tracks zone-size and zone-capacity in zoned devices and
calculate the usable blocks per segment and usable segments per section.
If zone-capacity is less than zone-size mark only those segments which
start before zone-capacity as free segments. All segments at and beyond
zone-capacity are treated as permanently used segments. In cases where
zone-capacity does not align with segment size the last segment will start
before zone-capacity and end beyond the zone-capacity of the zone. For
such spanning segments only sectors within the zone-capacity are used.
During writes and GC manage the usable segments in a section and usable
blocks per segment. Segments which are beyond zone-capacity are never
allocated, and do not need to be garbage collected, only the segments
which are before zone-capacity needs to garbage collected.
For spanning segments based on the number of usable blocks in that
segment, write to blocks only up to zone-capacity.
Zone-capacity is device specific and cannot be configured by the user.
Since NVMe ZNS device zones are sequentially write only, a block device
with conventional zones or any normal block device is needed along with
the ZNS device for the metadata operations of F2fs.
A typical nvme-cli output of a zoned device shows zone start and capacity
and write pointer as below:
SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones
are in EMPTY state. For each zone, only zone start + 49MB is usable area,
any lba/sector after 49MB cannot be read or written to, the drive will fail
any attempts to read/write. So, the second zone starts at 64MB and is
usable till 113MB (64 + 49) and the range between 113 and 128MB is
again unusable. The next zone starts at 128MB, and so on.
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since set/clear_inode_flag() don't need to return value to show
if flag is set, we can just call set/clear_bit() here.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just for code style, no logic change
1. delete useless space
2. change spaces into tab
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The return value of f2fs_flush_inline_data() is not used,
so delete it.
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added a new ioctl to send discard commands or/and zero out
to selected data area of a regular file for security reason.
The way of handling range.len of F2FS_IOC_SEC_TRIM_FILE:
1. Added -1 value support for range.len to secure trim the whole blocks
starting from range.start regardless of i_size.
2. If the end of the range passes over the end of file, it means until
the end of file (i_size).
3. ignored the case of that range.len is zero to prevent the function
from making end_addr zero and triggering different behaviour of
the function.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't define F2FS_IOC_* aliases to ioctls that already have a generic
FS_IOC_* name. These aliases are unnecessary, and they make it unclear
which ioctls are f2fs-specific and which are generic.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- don't panic kernel if f2fs_get_node_page() fails in
f2fs_recover_inline_data() or f2fs_recover_inline_xattr();
- return error number of f2fs_truncate_blocks() to
f2fs_recover_inline_data()'s caller;
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If two readahead threads having same offset enter in readpages, every read
IOs are split and issued to the disk which giving lower bandwidth.
This patch tries to avoid redundant readahead calls.
Fixes one build error reported by Randy.
Fix build error when F2FS_FS_COMPRESSION is not set/enabled.
This label is needed in either case.
../fs/f2fs/data.c: In function ‘f2fs_mpage_readpages’:
../fs/f2fs/data.c:2327:5: error: label ‘next_page’ used but not defined
goto next_page;
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
to two independent functions:
- f2fs_allocate_new_segment() for specified type segment allocation
- f2fs_allocate_new_segments() for all data type segments allocation
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Filesystem including f2fs should support stable page for special
device like software raid, however there is one missing path that
page could be updated while it is writeback state as below, fix
this.
- gc_node_segment
- f2fs_move_node_page
- __write_node_page
- set_page_writeback
- do_read_inode
- f2fs_init_extent_tree
- __f2fs_init_extent_tree
i_ext->len = 0;
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use validation of @fio to inidcate whether caller want to serialize IOs
in io.io_list or not, then @add_list will be redundant, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've added some knobs to enhance compression feature and harden
testing environment. In addition, we've fixed several bugs reported from Android
devices such as long discarding latency, device hanging during quota_sync, etc.
Enhancement:
- support lzo-rle algorithm
- add two ioctls to release and reserve blocks for compression
- support partial truncation/fiemap on compressed file
- introduce sysfs entries to attach IO flags explicitly
- add iostat trace point along with read io stat
Bug fix:
- fix long discard latency
- flush quota data by f2fs_quota_sync correctly
- fix to recover parent inode number for power-cut recovery
- fix lz4/zstd output buffer budget
- parse checkpoint mount option correctly
- avoid inifinite loop to wait for flushing node/meta pages
- manage discard space correctly
And some refactoring and clean up patches were added.
-----BEGIN PGP SIGNATURE-----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=MiEC
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added some knobs to enhance compression feature
and harden testing environment. In addition, we've fixed several bugs
reported from Android devices such as long discarding latency, device
hanging during quota_sync, etc.
Enhancements:
- support lzo-rle algorithm
- add two ioctls to release and reserve blocks for compression
- support partial truncation/fiemap on compressed file
- introduce sysfs entries to attach IO flags explicitly
- add iostat trace point along with read io stat
Bug fixes:
- fix long discard latency
- flush quota data by f2fs_quota_sync correctly
- fix to recover parent inode number for power-cut recovery
- fix lz4/zstd output buffer budget
- parse checkpoint mount option correctly
- avoid inifinite loop to wait for flushing node/meta pages
- manage discard space correctly
And some refactoring and clean up patches were added"
* tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: attach IO flags to the missing cases
f2fs: add node_io_flag for bio flags likewise data_io_flag
f2fs: remove unused parameter of f2fs_put_rpages_mapping()
f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
f2fs: avoid utf8_strncasecmp() with unstable name
f2fs: don't return vmalloc() memory from f2fs_kmalloc()
f2fs: fix retry logic in f2fs_write_cache_pages()
f2fs: fix wrong discard space
f2fs: compress: don't compress any datas after cp stop
f2fs: remove unneeded return value of __insert_discard_tree()
f2fs: fix wrong value of tracepoint parameter
f2fs: protect new segment allocation in expand_inode_data
f2fs: code cleanup by removing ifdef macro surrounding
f2fs: avoid inifinite loop to wait for flushing node pages at cp_error
f2fs: flush dirty meta pages when flushing them
f2fs: fix checkpoint=disable:%u%%
f2fs: compress: fix zstd data corruption
f2fs: add compressed/gc data read IO stat
f2fs: fix potential use-after-free issue
f2fs: compress: don't handle non-compressed data in workqueue
...
This patch adds another way to attach bio flags to node writes.
Description: Give a way to attach REQ_META|FUA to node writes
given temperature-based bits. Now the bits indicate:
* REQ_META | REQ_FUA |
* 5 | 4 | 3 | 2 | 1 | 0 |
* Cold | Warm | Hot | Cold | Warm | Hot |
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
kmalloc() returns kmalloc'ed memory, and kvmalloc() returns either
kmalloc'ed or vmalloc'ed memory. But the f2fs wrappers, f2fs_kmalloc()
and f2fs_kvmalloc(), both return both kinds of memory.
It's redundant to have two functions that do the same thing, and also
breaking the standard naming convention is causing bugs since people
assume it's safe to kfree() memory allocated by f2fs_kmalloc(). See
e.g. the various allocations in fs/f2fs/compress.c.
Fix this by making f2fs_kmalloc() just use kmalloc(). And to avoid
re-introducing the allocation failures that the vmalloc fallback was
intended to fix, convert the largest allocations to use f2fs_kvmalloc().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since the new pair function is introduced, we can call them to clean the
code in f2fs.h.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chao Yu <yuchao0@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Link: http://lkml.kernel.org/r/20200517214718.468-6-guoqing.jiang@cloud.ionos.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext4 and f2fs have duplicated the guts of the readahead code so they can
read past i_size. Instead, separate out the guts of the readahead code
so they can call it directly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Link: http://lkml.kernel.org/r/20200414150233.24495-14-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
v1 encryption policies are deprecated in favor of v2, and some new
features (e.g. encryption+casefolding) are only being added for v2.
Therefore, the "test_dummy_encryption" mount option (which is used for
encryption I/O testing with xfstests) needs to support v2 policies.
To do this, extend its syntax to be "test_dummy_encryption=v1" or
"test_dummy_encryption=v2". The existing "test_dummy_encryption" (no
argument) also continues to be accepted, to specify the default setting
-- currently v1, but the next patch changes it to v2.
To cleanly support both v1 and v2 while also making it easy to support
specifying other encryption settings in the future (say, accepting
"$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a
pointer to the dummy fscrypt_context rather than using mount flags.
To avoid concurrency issues, don't allow test_dummy_encryption to be set
or changed during a remount. (The former restriction is new, but
xfstests doesn't run into it, so no one should notice.)
Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4,
there are two regressions, both of which are test bugs: ext4/023 and
ext4/028 fail because they set an xattr and expect it to be stored
inline, but the increase in size of the fscrypt_context from
24 to 40 bytes causes this xattr to be spilled into an external block.
Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Jaegeuk Kim