Fixes segmentation fault using, for instance:
(gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
(gdb) bt
#0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
#1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:433
#2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:498
#3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
at util/parse-events.c:936
#4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
#5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
#6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
#7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
#8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
#9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
#10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
#11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
#12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
#13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
#14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
#15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)
Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints. Fix by checking before using.
Committer note:
This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.
Further info from a similar patch by Wang:
The error is in tracepoint_error: it assumes the 'e' parameter is valid.
However, there are many situation a parse_event() can be called without
parse_events_error. See result of
$ grep 'parse_events(.*NULL)' ./tools/perf/ -r'
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 196581717d ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mel reported stddev reporting was broken due to following commit:
106a94a0f8 ("perf stat: Introduce read_counters function")
This commit merged interval and overall counters reading into single
read_counters function.
The old interval code cleaned the stddev data for some reason (it's
never displayed in interval mode) and the mentioned commit kept on
cleaning the stddev data in merged function, which resulted in the
stddev not being displayed.
Removing the wrong stddev data cleanup init_stats call.
Reported-and-Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@vger.kernel.org # v4.2+
Fixes: 106a94a0f8 ("perf stat: Introduce read_counters function")
Link: http://lkml.kernel.org/r/1453290995-18485-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c97cf42219 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The while loop was spinning. Fix by removing a semicolon.
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 035827e9f2 ("perf tests: Add Intel CQM test")
Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible bug fixes:
- Fix reading of build-id from vDSO (Ben Hutchings)
- Fix processing samples for guests, noticed with 'perf kvm',
but noticeable as well via other tools, such as 'perf top'
(Ravi Bangoria)
Build infrastructure:
- Add feature-dump target and FEATURES_DUMP make variable, to
allow reusing the feature detection results among multiple
tools/ living codebases, such as perf and lib/bpf (Jiri Olsa)
- 'make -C tools/perf build-test' improvements, making it more
paralelizable and allowing building it outside of the source
tree, using O= (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWmV0JAAoJENZQFvNTUqpAjuMQALEDS6HtPwN5y/XpMLJqqWdI
EigVIOIZQUIsrNTJXT+qYWJ2T4SOeQzX9GjsuenbLy6qOwej4mj//se10v1Ev3zK
THlwz6pvRlMDtzOoV1zzkPaUdgbiWfuyuC5OTDo+YNtHdWeXNt4gND0CxqWTOs6N
DouCpHkrRa1DgYtV93hyg0XXJg4gox6P1Efq1gk4tlOpeiWJt188k8RjyBfhAueL
vjbO2ms3RmJhHa8qvuQdl+xW8rCIW3R//IPHJucsOYFl9dczYPxq/t9PbyOiI/fh
nBBn/4UAhgR0Rn9mDOJXoMGqXshHZA214T0+2XL8SFVdj/4YiUc3I+kwrJxBGGHk
BfJwnY/FWTAON0TSkHzG9AuRd29swefobx02EhxbuTyllCcsNCfwXCYPeHLlvtyQ
jO5WRFjQ0zRA0pz01YkNP3Ib6M0FW2l42o2m96sBPjRE1Crxy6dkHSFFCelL5sON
aTM2q3cODRXOKC7hoayJvFwsc1a7pQWw2MWKSbrIt/1QPuETJrDvHYi30C7JHPLf
0IxbI9Zt0WvlKVC+RhiZJSbkJOMap8Jl6tVCS3n2UM09Bj7wjaRGXbuLt0GwAtlI
lJXUdf3xOsfDg+6XUMir7VkPFUWKa8cKzOvpyWaXgAMUjWO5aNxxkx8QodsgNkWH
LdyRyeOoFz574tTf/h1W
=XjpY
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf tools improvements and fixes from Arnaldo Carvalho de Melo:
User visible bug fixes:
- Fix reading of build-id from vDSO (Ben Hutchings)
- Fix processing samples for guests, noticed with 'perf kvm',
but noticeable as well via other tools, such as 'perf top'
(Ravi Bangoria)
Build infrastructure:
- Add feature-dump target and FEATURES_DUMP make variable, to
allow reusing the feature detection results among multiple
tools/ living codebases, such as perf and lib/bpf (Jiri Olsa)
- 'make -C tools/perf build-test' improvements, making it more
paralelizable and allowing building it outside of the source
tree, using O= (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introducing FEATURES_DUMP make variable to provide features
detection dump file and bypass the feature detection.
The intention is to use this during build tests to skip
repeated features detection, like:
Get feature dump static build into /tmp/fd file:
$ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ OFF ]
SNIP
FEATURE-DUMP file copied into /tmp/fd
Use /tmp/fd to build perf:
$ make FEATURES_DUMP=/tmp/fd LDFLAGS=-static
$ file perf
perf: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), statically linked, for ...
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To provide FEATURE-DUMP into $(FEATURE_DUMP_COPY) if defined, with no
further action.
Get feature dump of the current build:
$ make feature-dump
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
FEATURE-DUMP file available in FEATURE-DUMP
Get feature dump static build into /tmp/fd file:
$ make feature-dump FEATURE_DUMP_COPY=/tmp/fd LDFLAGS=-static
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ OFF ]
SNIP
FEATURE-DUMP file copied into /tmp/fd
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel makefile only follows an 'O' option passed from command line
explicitely. In build-test with 'O' option set, kernel makefile
contaminate kernel source directory. Build test also fail if we don't
create output directory manually.
K_O_OPT is added and passed to kernel makefile if 'O' is passed
to build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an 'O' is passed to 'make build-test', many 'test -x' and 'test -f'
will fail because perf resides in a different directory. Fix this by
computing PERF_OUT according to 'O' and test correct output files.
For make_kernelsrc and make_kernelsrc_tools, set KBUILD_OUTPUT_DIR
instead because the path is different from others ($(O)/perf vs
$(O)/tools/perf).
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unlike tools/perf/Makefile, tools/perf/Makefile.perf obey 'O' option
when it is passed through cmdline only, due to code in
tools/scripts/Makefile.include:
ifneq ($(O),)
ifeq ($(origin O), command line)
...
ABSOLUTE_O := $(shell cd $(O) ; pwd)
OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
endif
endif
This patch passes 'O' to Makefile.perf through cmdline explicitly
to make it follow O variable during build-test.
'make clean' should have identical 'O' option with 'make'. If not,
config-clean may error.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452830421-77757-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make build-test' is painful because of time consuming. In a full test,
all test cases are built twice with tools/perf/Makefile and
tools/perf/Makefile.perf. 'Makefile' automatically computes parallel
options for make, but 'Makefile.perf' not, so all test cases is built
with one job. It is very slow.
This patch adds '-j' options to Makefile.perf testing. It computes
parallel building options like what tools/perf/Makefile does, and pass
'-j' option to Makefile.perf test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452687442-6186-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to use the long name (the filename) when reading the build-id
from a DSO. Using the short name doesn't work for (at least) vDSOs.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160113172301.GT28542@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While recording guest samples in host using perf kvm record, it will
populate unprocessable sample error, though samples will be recorded
properly. While generating report using perf kvm report, no samples will
be processed and same error will populate. We have seen this behaviour
with upstream perf(4.4-rc3) on x86 and ppc64 hardware.
Reason behind this failure is, when it tries to fetch machine from
rb_tree of machines, it fails. As a part of tracing a bug, we figured
out that this code was incorrectly refactored in commit 54245fdc35
("perf session: Remove wrappers to machines__find").
This patch will change the functionality such that if it can't fetch
machine in first trial, it will create one node of machine and add that to
rb_tree. So next time when it tries to fetch same machine from rb_tree,
it won't fail. Actually it was the case before refactoring of code in
aforementioned commit.
This patch is generated from acme perf/core branch.
Below I've mention an example that demonstrate the behaviour before and
after applying patch.
Before applying patch:
[Note: One needs to run guest before recording data in host]
ravi@ravi-bangoria:~$ ./perf kvm record -a
Warning:
5903 unprocessable samples recorded.
Do you have a KVM guest running and not using 'perf kvm'?
[ perf record: Captured and wrote 1.409 MB perf.data.guest (285 samples) ]
ravi@ravi-bangoria:~$ ./perf kvm report --stdio
Warning:
5903 unprocessable samples recorded.
Do you have a KVM guest running and not using 'perf kvm'?
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 285 of event 'cycles'
# Event count (approx.): 88715406
#
# Overhead Command Shared Object Symbol
# ........ ....... ............. ......
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
After applying patch:
ravi@ravi-bangoria:~$ ./perf kvm record -a
[ perf record: Captured and wrote 1.188 MB perf.data.guest (17 samples) ]
ravi@ravi-bangoria:~$ ./perf kvm report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 17 of event 'cycles'
# Event count (approx.): 700746
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
34.19% :5758 [unknown] [g] 0xffffffff818682ab
22.79% :5758 [unknown] [g] 0xffffffff812dc7f8
22.79% :5758 [unknown] [g] 0xffffffff818650d0
14.83% :5758 [unknown] [g] 0xffffffff8161a1b6
2.49% :5758 [unknown] [g] 0xffffffff818692bf
0.48% :5758 [unknown] [g] 0xffffffff81869253
0.05% :5758 [unknown] [g] 0xffffffff81869250
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v3.19+
Fixes: 54245fdc35 ("perf session: Remove wrappers to machines__find")
Link: http://lkml.kernel.org/r/1449471302-11283-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 fixes from Ingo Molnar:
"Misc changes:
- fix lguest bug
- fix /proc/meminfo output on certain configs
- fix pvclock bug
- fix reboot on certain iMacs by adding new reboot quirk
- fix bootup crash
- fix FPU boot line option parsing
- add more x86 self-tests
- small cleanups, documentation improvements, etc"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Remove an unneeded condition in srat_detect_node()
x86/vdso/pvclock: Protect STABLE check with the seqcount
x86/mm: Improve switch_mm() barrier comments
selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn
x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[]
lguest: Map switcher text R/O
x86/boot: Hide local labels in verify_cpu()
x86/fpu: Disable AVX when eagerfpu is off
x86/fpu: Disable MPX when eagerfpu is off
x86/fpu: Disable XGETBV1 when no XSAVE
x86/fpu: Fix early FPU command-line parsing
x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED
selftests/x86: Disable the ldt_gdt_64 test for now
x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output
x86/boot: Double BOOT_HEAP_SIZE to 64KB
x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
Pull perf fixes from Ingo Molnar:
"Tooling fixes, the biggest patch is one that decouples the kernel's
list.h from tooling list.h"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf tools: Fallback to srcdir/Documentation/tips.txt
perf ui/tui: Print helpline message as is
perf tools: Set and pass DOCDIR to builtin-report.c
perf tools: Add file_only config option to strlist
perf tools: Add more usage tips
perf record: Add --buildid-all option
tools subcmd: Add missing NORETURN define for parse-options.h
tools: Fix formatting of the "make -C tools" help message
tools: Make list.h self-sufficient
perf tools: Fix mmap2 event allocation in synthesize code
perf stat: Fix recort_usage typo
perf test: Reset err after using it hold errcode in hist testcases
perf test: Fix false TEST_OK result for 'perf test hist'
tools build: Add BPF feature check to test-all
perf bpf: Fix build breakage due to libbpf
tools: Move Makefile.arch from perf/config to tools/scripts
perf tools: Fix PowerPC native building
perf tools: Fix phony build target for build-test
perf tools: Add -lutil in python lib list for broken python-config
perf tools: Add missing sources to perf's MANIFEST
...
1/ Media error handling: The 'badblocks' implementation that originated
in md-raid is up-levelled to a generic capability of a block device.
This initial implementation is limited to being consulted in the pmem
block-i/o path. Later, 'badblocks' will be consulted when creating
dax mappings.
2/ Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability to
dax-mmap a block device directly.
3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
actively using an address range. This behavior is controlled via the
new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
existing "iomem=relaxed" kernel command line option.
4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7V5r
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this has appeared in -next and independently received a
build success notification from the kbuild robot. The 'for-4.5/block-
dax' topic branch was rebased over the weekend to drop the "block
device end-of-life" rework that Al would like to see re-implemented
with a notifier, and to address bug reports against the badblocks
integration.
There is pending feedback against "libnvdimm: Add a poison list and
export badblocks" received last week. Linda identified some localized
fixups that we will handle incrementally.
Summary:
- Media error handling: The 'badblocks' implementation that
originated in md-raid is up-levelled to a generic capability of a
block device. This initial implementation is limited to being
consulted in the pmem block-i/o path. Later, 'badblocks' will be
consulted when creating dax mappings.
- Raw block device dax: For virtualization and other cases that want
large contiguous mappings of persistent memory, add the capability
to dax-mmap a block device directly.
- Increased /dev/mem restrictions: Add an option to treat all
io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
while a driver is actively using an address range. This behavior
is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
overridden by the existing "iomem=relaxed" kernel command line
option.
- Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
block device shutdown crash fix, and other small libnvdimm fixes"
* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
block: kill disk_{check|set|clear|alloc}_badblocks
libnvdimm, pmem: nvdimm_read_bytes() badblocks support
pmem, dax: disable dax in the presence of bad blocks
pmem: fail io-requests to known bad blocks
libnvdimm: convert to statically allocated badblocks
libnvdimm: don't fail init for full badblocks list
block, badblocks: introduce devm_init_badblocks
block: clarify badblocks lifetime
badblocks: rename badblocks_free to badblocks_exit
libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
libnvdimm: Add a poison list and export badblocks
nfit_test: Enable DSMs for all test NFITs
md: convert to use the generic badblocks code
block: Add badblock management for gendisks
badblocks: Add core badblock management code
block: fix del_gendisk() vs blkdev_ioctl crash
block: enable dax for raw block devices
block: introduce bdev_file_inode()
restrict /dev/mem to idle io memory ranges
arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
...
A quiet release for SPI, not even many driver updates:
- Add a dummy loopback driver for use in exercising framework features
during development.
- Move the test utilities to tools/ and add support for transferring
data to and from a file instead of stdin and stdout to spidev_test.
- Support for Mediatek MT2701 and Renesas AG5 deices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlNpkAAoJECTWi3JdVIfQ2rkH/j8fhCJVAGIkFs49+jk/+ZBR
NsvUEnPae9+e7vx/UBFNFJrM/1cpqy5VhDSbl/UnJLnOwiOOGeOR5H7S6YgDcW8m
gwgeCUJU5eqXx1tAuLJrD/qLya8uQQC6XaSlT2Du2Zr15EZ7tUvlRTva9M2nRQCC
OBo6f0FY+ptv/aNL7ME1WY5T4uQJC1FqRfvj0Cle1ZC8A1gONPoI7WLPasMckBEX
g9q76OUxLZ/I9CASUGbJYMtq/eBca5kq+dPcFLPfNTKKJk98TgRcJHzT+NW9igo2
D5r/pcsv8pt6H0Q2df8nkRzfvM/EPk/5VAYVJAxCogelKnqVaI8wlc6P7Rq5Mz0=
=0Z1l
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release for SPI, not even many driver updates:
- Add a dummy loopback driver for use in exercising framework
features during development.
- Move the test utilities to tools/ and add support for transferring
data to and from a file instead of stdin and stdout to spidev_test.
- Support for Mediatek MT2701 and Renesas AG5 deices"
* tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
spi: loopback: fix typo in MODULE_PARM_DESC
spi: sun4i: Prevent chip-select from being activated twice before a transfer
spi: loopback-test: spi_check_rx_ranges can get always done
spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern
spi: loopback-test: write rx pattern also when running without tx_buf
spi: fsl-espi: expose maximum transfer size limit
spi: expose master transfer size limitation.
spi: zynq: use to_platform_device()
spi: cadence: use to_platform_device()
spi: mediatek: Add spi support for mt2701 IC
spi: mediatek: merge all identical compat to mtk_common_compat
spi: mtk: Add bindings for mediatek MT2701 soc platform
spi: mediatek: Prevent overflows in FIFO transfers
spi: s3c64xx: Remove unused platform_device_id entries
spi: use to_spi_device
spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmode
spi: imx: defer spi initialization, if DMA engine is
spi: imx: return error from dma channel request
spi: imx: enable loopback only for ECSPI controller family
spi: imx: fix loopback mode setup after controller reset
...
Here's the big set of char/misc patches for 4.5-rc1.
Nothing major, lots of different driver subsystem updates, full details
in the shortlog. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlaV0GsACgkQMUfUDdst+ymlPgCg07GSc4SOWlUL2V36vQ0kucoO
YjAAoMfeUEhsf/NJ7iaAMGQVUQKuYVqr
=BlqH
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here's the big set of char/misc patches for 4.5-rc1.
Nothing major, lots of different driver subsystem updates, full
details in the shortlog. All of these have been in linux-next for a
while"
* tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits)
mei: fix fasync return value on error
parport: avoid assignment in if
parport: remove unneeded space
parport: change style of NULL comparison
parport: remove unnecessary out of memory message
parport: remove braces
parport: quoted strings should not be split
parport: code indent should use tabs
parport: fix coding style
parport: EXPORT_SYMBOL should follow function
parport: remove trailing white space
parport: fix a trivial typo
coresight: Fix a typo in Kconfig
coresight: checking for NULL string in coresight_name_match()
Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical
Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy
Drivers: hv: vmbus: fix the building warning with hyperv-keyboard
extcon: add Maxim MAX3355 driver
Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek()
Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw()
...
The vdso-based sigreturn mechanism is fragile and isn't used by
modern glibc so, if we break it, we'll only notice when someone
tests an unusual libc.
Add an explicit selftest.
[ I wrote this while debugging a Bionic breakage -- my first guess
was that I had somehow messed up sigreturn. I've caused problems in
that code before, and it's really easy to fail to notice it because
there's nothing on a modern distro that needs vdso-based sigreturn. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/32946d714156879cd8e5d8eab044cd07557ed558.1452628504.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add a debugfs-based interface for interacting with the ACPICA's
AML debugger introduced in the previous cycle and a new user
space tool for that, fix some bugs related to the AML debugger
and clean up the code in question (Lv Zheng, Dan Carpenter,
Colin Ian King, Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number
of fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng,
Labbe Corentin, Prarit Bhargava, Colin Ian King, David E Box,
Rafael Wysocki).
In particular, the previously added erroneous support for the
_SUB object is dropped, the concatenate operator will support
all ACPI objects now, the Debug Object handling is improved,
the SuperName handling of parameters being control methods is
fixed, the ObjectType operator handling is updated to follow
ACPI 5.0A and the handling of CondRefOf and RefOf is updated
accordingly, module-level code will be executed after loading
each ACPI table now (instead of being run once after all tables
containing AML have been loaded), the Operation Region handlers
management is updated to fix some reported problems and a the
ACPICA code in the kernel is more in line with the upstream
now.
- Update the ACPI backlight driver to provide information on
whether or not it will generate key-presses for brightness
change hotkeys and update some platform drivers (dell-wmi,
thinkpad_acpi) to use that information to avoid sending double
key-events to users pace for these, add new ACPI backlight
quirks (Hans de Goede, Aaron Lu, Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects
found in the ACPI namespace and add a helper for checking if
there is a device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in
the namespace even if _STA fails for them which helps to avoid
device enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI
driver for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel
SoCs where ACPI tables have no power management support for
the DMA controller itself, but it can be powered off automatically
when the last (other) device on the SoC is powered off via ACPI
and clean up the ACPI driver for Intel SoCs (acpi-lpss) after
previous attempts to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to
the platform bus type, update the MFD subsystem's handling
of device properties and add support for passing default
configuration data as device properties to the intel-lpss MFD
drivers, convert the designware I2C driver to use the unified
device properties API and add a fallback mechanism for using
default built-in properties if the platform firmware fails
to provide the properties as expected by drivers (Andy Shevchenko,
Mika Westerberg, Heikki Krogerus, Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings
(Pi-Cheng Chen).
- Update the cpufreq core to make the handling of governors
more efficient, especially on systems where policy objects
are shared between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding
Device Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it
is running on, make it use a special P-state selection algorithm
(with an IO wait time compensation tweak) on Atom CPUs based on
the Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling
devices that use the (P * V^2 * f) dynamic power draw formula
where V is the voltage, f is the frequency and P is a constant
coefficient provided by Device Tree and update the arm_big_little
cpufreq driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia,
Jacob Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us
calculation (Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x,
ux500, exynos) that cannot be built as modules in practice
(Paul Gortmaker).
- PM core update to prevent devices from being probed during
system suspend/resume which is generally problematic and may
lead to inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki,
Ulf Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OlYA
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull oower management and ACPI updates from Rafael Wysocki:
"As far as the number of commits goes, ACPICA takes the lead this time,
followed by cpufreq and the device properties framework changes.
The most significant new feature is the debugfs-based interface to the
ACPICA's AML debugger added in the previous cycle and a new user space
tool for accessing it.
On the cpufreq front, the core is updated to handle governors more
efficiently, particularly on systems where a single cpufreq policy
object is shared between multiple CPUs, and there are quite a few
changes in drivers (intel_pstate, cpufreq-dt etc).
The device properties framework is updated to handle built-in (ie
included in the kernel itself) device properties better, among other
things by adding a fallback mechanism that will allow drivers to
provide default properties to be used in case the plaform firmware
doesn't provide the properties expected by them.
The Operating Performance Points (OPP) framework gets new DT bindings
and debugfs support.
A new cpufreq driver for ST platforms is added and the ACPI driver for
AMD SoCs will now support the APM X-Gene ACPI I2C device.
The rest is mostly fixes and cleanups all over.
Specifics:
- Add a debugfs-based interface for interacting with the ACPICA's AML
debugger introduced in the previous cycle and a new user space tool
for that, fix some bugs related to the AML debugger and clean up
the code in question (Lv Zheng, Dan Carpenter, Colin Ian King,
Markus Elfring).
- Update ACPICA to upstream revision 20151218 including a number of
fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe
Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael
Wysocki).
In particular, the previously added erroneous support for the _SUB
object is dropped, the concatenate operator will support all ACPI
objects now, the Debug Object handling is improved, the SuperName
handling of parameters being control methods is fixed, the
ObjectType operator handling is updated to follow ACPI 5.0A and the
handling of CondRefOf and RefOf is updated accordingly, module-
level code will be executed after loading each ACPI table now
(instead of being run once after all tables containing AML have
been loaded), the Operation Region handlers management is updated
to fix some reported problems and a the ACPICA code in the kernel
is more in line with the upstream now.
- Update the ACPI backlight driver to provide information on whether
or not it will generate key-presses for brightness change hotkeys
and update some platform drivers (dell-wmi, thinkpad_acpi) to use
that information to avoid sending double key-events to users pace
for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu,
Adrien Schildknecht).
- Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).
- Fix the handling of the list of device IDs of device objects found
in the ACPI namespace and add a helper for checking if there is a
device object for a given device ID (Lukas Wunner).
- Change the logic in the ACPI namespace scanning code to create
struct acpi_device objects for all ACPI device objects found in the
namespace even if _STA fails for them which helps to avoid device
enumeration problems on Microsoft Surface 3 (Aaron Lu).
- Add support for the APM X-Gene ACPI I2C device to the ACPI driver
for AMD SoCs (Loc Ho).
- Fix the long-standing issue with the DMA controller on Intel SoCs
where ACPI tables have no power management support for the DMA
controller itself, but it can be powered off automatically when the
last (other) device on the SoC is powered off via ACPI and clean up
the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts
to fix that problem (Andy Shevchenko).
- Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
Sinan Kaya).
- Update the device properties framework for better handling of
built-in properties, add support for built-in properties to the
platform bus type, update the MFD subsystem's handling of device
properties and add support for passing default configuration data
as device properties to the intel-lpss MFD drivers, convert the
designware I2C driver to use the unified device properties API and
add a fallback mechanism for using default built-in properties if
the platform firmware fails to provide the properties as expected
by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus,
Andrew Morton).
- Add new Device Tree bindings to the Operating Performance Points
(OPP) framework and update the exynos4412 DT binding accordingly,
introduce debugfs support for the OPP framework (Viresh Kumar,
Bartlomiej Zolnierkiewicz).
- Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng
Chen).
- Update the cpufreq core to make the handling of governors more
efficient, especially on systems where policy objects are shared
between multiple CPUs (Viresh Kumar, Rafael Wysocki).
- Fix cpufreq governor handling on configurations with
CONFIG_HZ_PERIODIC set (Chen Yu).
- Clean up the cpufreq core code related to the boost sysfs knob
support and update the ACPI cpufreq driver accordingly (Rafael
Wysocki).
- Add a new cpufreq driver for ST platforms and corresponding Device
Tree bindings (Lee Jones).
- Update the intel_pstate driver to allow the P-state selection
algorithm used by it to depend on the CPU ID of the processor it is
running on, make it use a special P-state selection algorithm (with
an IO wait time compensation tweak) on Atom CPUs based on the
Airmont and Silvermont cores so as to reduce their energy
consumption and improve intel_pstate documentation (Philippe
Longepe, Srinivas Pandruvada).
- Update the cpufreq-dt driver to support registering cooling devices
that use the (P * V^2 * f) dynamic power draw formula where V is
the voltage, f is the frequency and P is a constant coefficient
provided by Device Tree and update the arm_big_little cpufreq
driver to use that support (Punit Agrawal).
- Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob
Tanenbaum, Markus Elfring).
- cpuidle core tweaks related to polling and measured_us calculation
(Rik van Riel).
- Removal of modularity from a few cpuidle drivers (clps711x, ux500,
exynos) that cannot be built as modules in practice (Paul
Gortmaker).
- PM core update to prevent devices from being probed during system
suspend/resume which is generally problematic and may lead to
inconsistent behavior (Grygorii Strashko).
- Assorted updates of the PM core and related code (Julia Lawall,
Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf
Hansson).
- PNP bus type updates (Christophe Le Roy, Heiner Kallweit).
- PCI PM code cleanups (Jarkko Nikula, Julia Lawall).
- cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)"
* tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits)
PM / clk: don't leave clocks enabled when driver not bound
i2c: dw: Add APM X-Gene ACPI I2C device support
ACPI / APD: Add APM X-Gene ACPI I2C device support
ACPI / LPSS: change 'does not have' to 'has' in comment
Revert "dmaengine: dw: platform: provide platform data for Intel"
dmaengine: dw: return immediately from IRQ when DMA isn't in use
dmaengine: dw: platform: power on device on shutdown
ACPI / LPSS: override power state for LPSS DMA device
PM / OPP: Use snprintf() instead of sprintf()
Documentation: cpufreq: intel_pstate: enhance documentation
ACPI, PCI, irq: remove redundant check for null string pointer
ACPI / video: driver must be registered before checking for keypresses
cpufreq-dt: fix handling regulator_get_voltage() result
cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC
PM / sleep: Add support for read-only sysfs attributes
ACPI: Fix white space in a structure definition
ACPI / SBS: fix inconsistent indenting inside if statement
PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching
ACPI / PNP: constify device IDs
ACPI / PCI: Simplify acpi_penalize_isa_irq()
...
minor fixes.
Here's what else is new:
o A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
o New selftest to test the instance create and delete
o Better debug output when ftrace fails
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWlU8tAAoJEKKk/i67LK/8JckH/2XIhjwMunm35uCg1308sDqy
d44G3+p0pm8ztjBf8iD8wH2nP3m7z+nC8JBmSPIUgAHsKOYHWsBy2A/36OVWv5lK
1hVXvBwOuZXnyWXr7bC2RO9S9f9acSFaabZXWDi1BCJRJSgEcknz32V7ZAL4jOCO
SfBWBNrWJfUsURbfbElfVxPLArvyUg9Bb5dW5B+QFf6PuoJaORYzNLYXHlbsq++T
WlrlnD+mFZ/DKFZ/gl3FMSGMPaGimw09/3eqMzv/tLQobp6PbCWlJTwjUoxJ/9dO
XOY4sWUrUUZilU8qCk0i0ZSEumWmE+SWS3eq+Ef18B/5haIj/LkoM4UQD3h2Rc4=
=FDR+
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
Pull networking updates from Davic Miller:
1) Support busy polling generically, for all NAPI drivers. From Eric
Dumazet.
2) Add byte/packet counter support to nft_ct, from Floriani Westphal.
3) Add RSS/XPS support to mvneta driver, from Gregory Clement.
4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
Frederic Sowa.
5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.
6) Add support for VLAN device bridging to mlxsw switch driver, from
Ido Schimmel.
7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.
8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.
9) Reorganize wireless drivers into per-vendor directories just like we
do for ethernet drivers. From Kalle Valo.
10) Provide a way for administrators "destroy" connected sockets via the
SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti.
11) Add support to add/remove multicast routes via netlink, from Nikolay
Aleksandrov.
12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.
13) Add forwarding and packet duplication facilities to nf_tables, from
Pablo Neira Ayuso.
14) Dead route support in MPLS, from Roopa Prabhu.
15) TSO support for thunderx chips, from Sunil Goutham.
16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.
17) Rationalize, consolidate, and more completely document the checksum
offloading facilities in the networking stack. From Tom Herbert.
18) Support aborting an ongoing scan in mac80211/cfg80211, from
Vidyullatha Kanchanapally.
19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
net: bnxt: always return values from _bnxt_get_max_rings
net: bpf: reject invalid shifts
phonet: properly unshare skbs in phonet_rcv()
dwc_eth_qos: Fix dma address for multi-fragment skbs
phy: remove an unneeded condition
mdio: remove an unneed condition
mdio_bus: NULL dereference on allocation error
net: Fix typo in netdev_intersect_features
net: freescale: mac-fec: Fix build error from phy_device API change
net: freescale: ucc_geth: Fix build error from phy_device API change
bonding: Prevent IPv6 link local address on enslaved devices
IB/mlx5: Add flow steering support
net/mlx5_core: Export flow steering API
net/mlx5_core: Make ipv4/ipv6 location more clear
net/mlx5_core: Enable flow steering support for the IB driver
net/mlx5_core: Initialize namespaces only when supported by device
net/mlx5_core: Set priority attributes
net/mlx5_core: Connect flow tables
net/mlx5_core: Introduce modify flow table command
net/mlx5_core: Managing root flow table
...
Pull UML updates from Richard Weinberger:
"This contains beside of random fixes/cleanups two bigger changes:
- seccomp support by Mickaël Salaün
- IRQ rework by Anton Ivanov"
* 'for-linus-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Use race-free temporary file creation
um: Do not set unsecure permission for temporary file
um: Fix build error and kconfig for i386
um: Add seccomp support
um: Add full asm/syscall.h support
selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOK
um: Fix ptrace GETREGS/SETREGS bugs
um: link with -lpthread
um: Update UBD to use pread/pwrite family of functions
um: Do not change hard IRQ flags in soft IRQ processing
um: Prevent IRQ handler reentrancy
uml: flush stdout before forking
uml: fix hostfs mknod()
Some people don't install perf, but just use compiled version in the
source. Fallback to lookup the source directory for those poor guys. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-4-git-send-email-namhyung@kernel.org
[ Make perf_tip() return NULL for ENOENT, making the fallback to really take place ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tip message contains a percent sign, it was treated printf format
specifier so broken string was printed like below.
Tip: Limit to show entries above 577nly: perf report --percent-limit 5
^^^
As ui_browser__show receives format string, pass additional "%s" so that
the help (tip) message can be printed as is.
Tip: Limit to show entries above 5% only: perf report --percent-limit 5
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509594-13616-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used to locate perf document directory to find tips.txt in case
it's not installed on the system.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If strlist_config.dirname is present, the strlist__new() tries to load
stirngs from dirname/list file first but if it failes it falls back to
add 'list' as string. But sometimes it's not desired so adds new
file_only field to prevent it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452334589-8782-2-git-send-email-namhyung@kernel.org
[ Add documentation for strlist_config::file_only, in the struct definition */
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --buildid-all option is to record build-id of all DSOs in the file.
It might be very costly to postprocess samples to find which DSO hits.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1452519429-31779-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parse-options.h uses the NORETURN macro without defining it. perf
doesn't see a build error because it defines the macro in util.h before
including parse-options.h. But any other tool including it will see an
error.
Define the macro in parse-options.h (if not already defined) so that
other tools can include it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/6c16294ac6dbe5e2ca28fd935fe4389996588564.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Align the x86_energy_perf_policy line with the others and restore the
original alphabetical sorting.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/572931227adbf1fc9ca96e1dae3ef2e89387feca.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7f5f873c6a ("rculist: Use WRITE_ONCE() when deleting from
reader-visible list") added the use of the WRITE_ONCE macro to the
kernel version of list.h, which broke the stacktool build because the
tools list.h includes the kernel list.h.
Avoid this type of situation in the future and make list.h
self-sufficient by copying the kernel list.h routines directly into
tools list.h.
This is a straight copy except for adjustments to the include statements
and copying of the tools-specific list routines (list_del_range and
list_for_each_from).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/59cdc19c6589d1b5ef43d83b0e2d5a4a40301374.1450442274.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event__synthesize_mmap_events() issues mmap2 events, but the memory
of that event is allocated using:
mmap_event = malloc(sizeof(mmap_event->mmap) + machine->id_hdr_size);
If path of mmap source file is long (near PATH_MAX), random crash would
happen. Should use sizeof(mmap_event->mmap2).
Fix two memory allocations.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452593524-138970-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported gcc 6 complains when compiling perf stat command:
builtin-stat.c:1591:27: error: ‘recort_usage’ defined but not used
[-Werror=unused-const-variable]
static const char * const recort_usage[] = {
^~~~~~~~~~~~
I fixed the typo and realized we already export record_usage, so I also
prefixed it with stat (and included report_usage).
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452591329-27620-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ldt_gdt.c relies on cross-cpu invalidation of SS to do one of
its tests. On 32-bit builds, this works fine, but on 64-bit
builds, it only works if the kernel has proper SS sigcontext
handling for 64-bit user programs.
Since the SS fixes are currently reverted, restrict the test
case to 32 bits for now.
In principle, I could change the test to use a different segment
register, but it would be messy: CS can't point to the LDT for
64-bit code, and the other registers don't result in immediate
faults because they aren't reloaded on kernel -> user
transitions.
When we fix sigcontext (in 4.6?), we can revert this.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/231591d9122d282402d8f53175134f8db5b3bc73.1452561752.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Developer stuff:
- Fix a few clean targets in tools/ (Jiri Olsa)
- Add missing sources to perf's MANIFEST, fixing the out of tree build with
'make perf-tar*-src-pkg' tarballs (Jiri Olsa)
- Fix bpf related build problems in PowerPC (Naveen N. Rao, Wang Nan)
- 'make -C tools/perf build-test' fixes (Wang Nan)
- Fix 'perf test hist' entry (Wang Nan)
- Add BPF feature check to test-all, as in an environment with all other
features enabled, BPF would be considered enabled without doing real
feature check. (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWlC4BAAoJENZQFvNTUqpAOtwP/iI6iCnG/CGG31+BOJ6cIVS1
ieAGnjNJsJ+PaKMitlurebAggTQsBUS79Zeflycel7sg7lS1qAkoa6bo7OePNYIs
OzYZo8WWrGqxx0546YJ7I4RE2X7hlUa0+hcTWZm6ntdGT8DgO4+aBfAlQIZSx8ak
Y8Cjw2o60xpR8Y7g5CE54BEKpO34BgEYbhn5WrZ5BWnLRiDt33f5s7p1M5GXeUEm
nrhBOXj0vkM5R/BeteDVY4CKG7SHExgHyIEFAoTKELzCyQV50kwMbloIQLXTrrSe
mqEhDB9uy98ygZhudtshrCt9UiZ06Lw2ji0p4J3ZhNpcSKvebGqj/l5BNT4CjfkL
VhmgKZbVwvyZS9bGAL8RCClZSlsr4emrH2R/hdvF2uKN5MgPPhcOZJMJ5vhLIYGr
Y3nbj8R3cJS4uNwEaJY1fNwtpoGdAv+Otz3qtafmW8M/KobIJzsRrl8GFd2LEpYX
Uq/lMbEgGXZ+n6zri0f4MNYeQ2Sba30LIyKnX7rFlmRkH4mbHbUNz67VyM3n9iVY
GNOExWOGENoNFNB+jLNv2+lSfEmsvAJaaAbs/QCgQppG6W/YXi4Ts4G+iUcGi8HF
YNjrXmhcDJgHN7/RQevHZLFb2W1O5dhF/bV5NnDWnqLrPHWTLoD4heiwA/i49fO4
01fthYa9Y812vIKXytcK
=KaRk
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
" - Fix a few clean targets in tools/ (Jiri Olsa)
- Add missing sources to perf's MANIFEST, fixing the out of tree build with
'make perf-tar*-src-pkg' tarballs (Jiri Olsa)
- Fix bpf related build problems in PowerPC (Naveen N. Rao, Wang Nan)
- 'make -C tools/perf build-test' fixes (Wang Nan)
- Fix 'perf test hist' entry (Wang Nan)
- Add BPF feature check to test-all, as in an environment with all other
features enabled, BPF would be considered enabled without doing real
feature check. (Wang Nan)"
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull timer updates - and a leftover fix - from Thomas Gleixner:
"A rather large (commit wise) update from the timer side:
- A bulk update to make compile tests work in the clocksource drivers
- An overhaul of the h8300 timers
- Some more Y2038 work
- A few overflow prevention checks in the timekeeping/ntp code
- The usual pile of fixes and improvements to the various
clocksource/clockevent drivers and core code"
Also:
"A single fix for the posix-clock poll code which did not make it into
4.4"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
clocksource/drivers/acpi_pm: Convert to pr_* macros
clocksource: Make clocksource validation work for all clocksources
timekeeping: Cap adjustments so they don't exceed the maxadj value
ntp: Fix second_overflow's input parameter type to be 64bits
ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
timekeeping: Provide internal function __ktime_get_real_seconds
clocksource/drivers/h8300: Use ioread / iowrite
clocksource/drivers/h8300: Initializer cleanup.
clocksource/drivers/h8300: Simplify delta handling
clocksource/drivers/h8300: Fix timer not overflow case
clocksource/drivers/h8300: Change to overflow interrupt
clocksource/drivers/lpc32: Correct pr_err() output format
clocksource/drivers/arm_global_timer: Fix suspend resume
clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
clocksource/drivers/h8300: Increase the compilation test coverage
...
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-clock: Fix return code on the poll method's error path
* pm-sleep:
PM / sleep: Add support for read-only sysfs attributes
* pm-tools:
cpupower: fix how "cpupower frequency-info" interprets latency
cpupower: rework the "cpupower frequency-info" command
cpupower: Do not analyse offlined cpus
cpupower: Provide STATIC variable in Makefile for debug builds
cpupower: Fix precedence issue
* acpica: (43 commits)
ACPICA: Drop Linux-specific waking vector functions
ACPICA: Update version to 20151218
ACPICA: Add per-table execution of module-level code
ACPICA: Add "root node" case to the ACPI name repair code
ACPICA: Events: Introduce ACPI_REG_DISCONNECT invocation to acpi_ev_execute_reg_methods()
ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages
ACPICA: Events: Split acpi_ev_associate_reg_method() from region initialization code
ACPICA: Events: Fix an issue that region object is re-attached to another scope when it is already attached
ACPICA: Utilities: Reorder initialization code
ACPICA: Events: Uses common_notify for address space handlers
ACPICA: Events: Deploys acpi_ev_find_region_handler()
ACPICA: Cleanup code related to the per-table module level improvement
ACPICA: Update for CondRefOf and RefOf operators
ACPICA: Update internal #defines for ObjectType operator. No functional change
ACPICA: Update parameter type for ObjectType operator
ACPICA: Parser: Fix for SuperName method invocation
ACPICA: Parser: Add constants for internal namepath function
ACPICA: iasl/Disassembler: Support ASL ElseIf operator
ACPICA: Add new exception code, AE_IO_ERROR
ACPICA: Tools: Add spacing and missing options in acpibin tool
...
* acpi-debug:
ACPI / debugger: Fix a redundant mutex unlock issue in acpi_aml_open()
ACPI / debugger: copy_to_user doesn't return errors
ACPI / debugger: remove some unneeded conditions
ACPI / debugger: Fix an issue a flag is modified without locking
ACPI / debugger: Add module support for ACPI debugger
tools/power/acpi: Add userspace AML interface support
ACPI / debugger: Add IO interface to access debugger functionalities
ACPICA: Debugger: Fix runtime stub issues of ACPI_DEBUGGER_EXEC using different stub mechanism
ACPICA: Debugger: Convert some mechanisms to OSPM specific
ACPICA: Debugger: Remove unnecessary status check
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Intel Knights Landing support. (Harish Chegondi)
- Intel Broadwell-EP uncore PMU support. (Kan Liang)
- Core code improvements. (Peter Zijlstra.)
- Event filter, LBR and PEBS fixes. (Stephane Eranian)
- Enable cycles:pp on Intel Atom. (Stephane Eranian)
- Add cycles:ppp support for Skylake. (Andi Kleen)
- Various x86 NMI overhead optimizations. (Andi Kleen)
- Intel PT enhancements. (Takao Indoh)
- AMD cache events fix. (Vince Weaver)
Tons of tooling changes:
- Show random perf tool tips in the 'perf report' bottom line
(Namhyung Kim)
- perf report now defaults to --group if the perf.data file has
grouped events, try it with:
# perf record -e '{cycles,instructions}' -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
# perf report
# Samples: 1K of event 'anon group { cycles, instructions }'
# Event count (approx.): 1955219195
#
# Overhead Command Shared Object Symbol
2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle
1.05% 0.33% firefox libxul.so [.] js::SetObjectElement
1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno
0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab
0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1>
0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
0.62% 1.27% firefox libxul.so [.] js::GetIterator
0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty
0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining
- Introduce the 'perf stat record/report' workflow:
Generate perf.data files from 'perf stat', to tap into the
scripting capabilities perf has instead of defining a 'perf stat'
specific scripting support to calculate event ratios, etc.
Simple example:
$ perf stat record -e cycles usleep 1
Performance counter stats for 'usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$ perf stat report
Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':
1,134,996 cycles
0.000670644 seconds time elapsed
$
It generates PERF_RECORD_ userspace records to store the details:
$ perf report -D | grep PERF_RECORD
0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
0x12a [0x40]: PERF_RECORD_STAT_CONFIG
0x16a [0x30]: PERF_RECORD_STAT
-1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
0x1da [0x18]: PERF_RECORD_STAT_ROUND
[acme@ssdandy linux]$
An effort was made to make perf.data files generated like this to
not generate cryptic messages when processed by older tools.
The 'perf script' bits need rebasing, will go up later.
- Make command line options always available, even when they depend
on some feature being enabled, warning the user about use of such
options (Wang Nan)
- Support hw breakpoint events (mem:0xAddress) in the default output
mode in 'perf script' (Wang Nan)
- Fixes and improvements for supporting annotating ARM binaries,
support ARM call and jump instructions, more work needed to have
arch specific stuff separated into tools/perf/arch/*/annotate/
(Russell King)
- Add initial 'perf config' command, for now just with a --list
command to the contents of the configuration file in use and a
basic man page describing its format, commands for doing edits and
detailed documentation are being reviewed and proof-read. (Taeung
Song)
- Allows BPF scriptlets specify arguments to be fetched using DWARF
info, using a prologue generated at compile/build time (He Kuang,
Wang Nan)
- Allow attaching BPF scriptlets to module symbols (Wang Nan)
- Allow attaching BPF scriptlets to userspace code using uprobe (Wang
Nan)
- BPF programs now can specify 'perf probe' tunables via its section
name, separating key=val values using semicolons (Wang Nan)
Testing some of these new BPF features:
Use case: get callchains when receiving SSL packets, filter then in the
kernel, at arbitrary place.
# cat ssl.bpf.c
#define SEC(NAME) __attribute__((section(NAME), used))
struct pt_regs;
SEC("func=__inet_lookup_established hnum")
int func(struct pt_regs *ctx, int err, unsigned short port)
{
return err == 0 && port == 443;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
# perf record -a -g -e ssl.bpf.c
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
# perf script | head -30
swapper 0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
1163ffa start_kernel ([kernel.vmlinux].init.text)
11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)
qemu-system-x86 9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
430a br_handle_frame_finish ([bridge])
48bc br_handle_frame ([bridge])
855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
#
- Use 'perf probe' various options to list functions, see what
variables can be collected at any given point, experiment first
collecting without a filter, then filter, use it together with
'perf trace', 'perf top', with or without callchains, if it
explodes, please tell us!
- Introduce a new callchain mode: "folded", that will list per line
representations of all callchains for a give histogram entry,
facilitating 'perf report' output processing by other tools, such
as Brendan Gregg's flamegraph tools (Namhyung Kim)
E.g:
# perf report | grep -v ^# | head
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
|
---cpu_startup_entry
|
|--12.07%--start_secondary
|
--6.30%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
#
Becomes, in "folded" mode:
# perf report -g folded | grep -v ^# | head -5
18.37% 0.00% swapper [kernel.kallsyms] [k] cpu_startup_entry
12.07% cpu_startup_entry;start_secondary
6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] call_cpuidle
11.23% call_cpuidle;cpu_startup_entry;start_secondary
5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
16.90% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter
11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
15.12% 0.00% swapper [kernel.kallsyms] [k] cpuidle_enter_state
#
The user can also select one of "count", "period" or "percent" as
the first column.
... and lots of infrastructure enhancements, plus fixes and other
changes, features I failed to list - see the shortlog and the git log
for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
perf evlist: Add --trace-fields option to show trace fields
perf record: Store data mmaps for dwarf unwind
perf libdw: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Check for mmaps also in MAP__VARIABLE tree
perf unwind: Use find_map function in access_dso_mem
perf evlist: Remove perf_evlist__(enable|disable)_event functions
perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
perf report: Show random usage tip on the help line
perf hists: Export a couple of hist functions
perf diff: Use perf_hpp__register_sort_field interface
perf tools: Add overhead/overhead_children keys defaults via string
perf tools: Remove list entry from struct sort_entry
perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
perf script: Align event name properly
perf tools: Add missing headers in perf's MANIFEST
perf tools: Do not show trace command if it's not compiled in
perf report: Change default to use event group view
perf top: Decay periods in callchains
tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
tools lib: Sync tools/lib/find_bit.c with the kernel
...
All hists test cases forget to reset err after using it to hold an
error code. If error occure in setup_fake_machine() it incorrectly
return TEST_OK.
This patch fixes it.
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-13-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 71d6de64fe ("perf test: Fix hist testcases when kptr_restrict is on")
solves a double free problem when 'perf test hist' calling
setup_fake_machine(). However, the result is still incorrect. For example:
$ ./perf test -v 'filtering hist entries'
25: Test filtering hist entries :
--- start ---
test child forked, pid 4186
Cannot create kernel maps
test child finished with 0
---- end ----
Test filtering hist entries: Ok
In this case the body of this test is not get executed at all, but the
result is 'Ok'.
Actually, in setup_fake_machine() there's no need to create real kernel
maps. What we want are the fake maps. This patch removes the
machine__create_kernel_maps() in setup_fake_machine(), so it won't be
affected by kptr_restrict setting.
Test result:
$ cat /proc/sys/kernel/kptr_restrict
1
$ ~/perf test -v hist
15: Test matching and linking multiple hists :
--- start ---
test child forked, pid 24031
test child finished with 0
---- end ----
Test matching and linking multiple hists: Ok
[SNIP]
Suggested-and-Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-12-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.
This patch adds test-bpf.c into test-all.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build is currently (v4.4-rc5) broken on powerpc:
bpf.c:28:4: error: #error __NR_bpf not defined. libbpf does not support
your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fix this by including tools/scripts/Makefile.arch for the proper $ARCH
macro. While at it, remove redundant LP64 macro definition.
Also, since libbpf require $(srctree) now, detect the path of srctree
like perf.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-10-git-send-email-wangnan0@huawei.com
[Use tools/scripts/Makefile.arch]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After this patch other directories can use this architecture detector
without directly including it from perf's directory. Libbpf would
utilize it to get proper $(ARCH) so it can receive correct uapi include
directory.
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452520124-2073-8-git-send-email-wangnan0@huawei.com
[ Add missing srctree definition in tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.
Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make_kernelsrc and make_kernelsrc_tools are skiped if a previous
build-test is done, because 'make build-test' creates two files with
same names. To avoid this, they should be included in .PHONY list.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some system the perf-config is broken, causes link failure like this:
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_forkpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3816: undefined reference to `forkpty'
/usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_openpty':
/opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3756: undefined reference to `openpty'
collect2: error: ld returned 1 exit status
make[1]: *** [/home/wangnan/kernel-hydrogen/tools/perf/out/perf] Error 1
make: *** [all] Error 2
$ python-config --libs
-lpthread -ldl -lpthread -lutil -lm -lpython2.7
In this case a '-lutil' should be appended to -lpython2.7.
(I know we have --start-group and --end-group. I can see them in command
line of collect2 by strace. However it doesn't work. Seems I have a
broken environment?)
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter