The ti_sn_bridge_gpio_set() got the return value of
regmap_update_bits() but didn't check it. The function can't return
an error value, but we should at least print a warning if it didn't
work.
This fixes a compiler warning about setting "ret" but not using it.
Fixes: 27ed2b3f22 ("drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.4.Ia4376fd88cdc6e8f8b43c65548458305f82f1d61@changeid
When building we were getting an error:
warning: cannot understand function prototype:
'const unsigned int ti_sn_bridge_dp_rate_lut[] = '
Arrays aren't supposed to be marked with "/**" kerneldoc comments. Fix.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.2.If3807e4ebf7f0440f64c3069edcfac9a70171940@changeid
The kernel test robot noted that if "OF" is defined (which is needed
to select DRM_TI_SN65DSI86 at all) but not OF_GPIO that we'd get
compile failures because some of the members that we access in "struct
gpio_chip" are only defined "#if defined(CONFIG_OF_GPIO)".
All the GPIO bits in the driver are all nicely separated out. We'll
guard them with the same "#if defined" that the header has and add a
little stub function if OF_GPIO is not defined.
Fixes: 27ed2b3f22 ("drm/bridge: ti-sn65dsi86: Export bridge GPIOs to Linux")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612123003.v2.1.Ibe95d8f3daef01e5c57d4c8c398f04d6a839492c@changeid
There is no point to print deferred probe (and its failures to get
resources) as an error. Also there is no need to print regulator errors
twice.
In case of multiple probe tries this would pollute the dmesg.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200544.7849-1-krzk@kernel.org
Compared to its predecessors, the PX30 VOP has a different register layout
for enabling per-pixel alpha. Instead of src_alpha_ctl and dst_alpha_ctl,
there is a single alpha control register. This register takes some fields
from src_alpha_ctl, but with a different layout.
Add support for the required fields to the PX30 VOP window descriptions,
which makes per-pixel-alpha formats behave correctly.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200416140526.262533-1-paul.kocialkowski@bootlin.com
I broke that in my refactoring:
commit 7d2cd72a9a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri May 29 16:05:42 2020 +0200
drm/shmem-helpers: Simplify dma-buf importing
I'm not entirely sure of the history here, but I suspect that in one
of the rebases or when applying the patch I moved the hunk from
drm_gem_shmem_prime_import_sg_table(), where it should be, to
drm_gem_shmem_create_with_handle(), which is totally wrong.
Remedy this.
Thanks for Thomas for the crucial hint in debugging this.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 7d2cd72a9a ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114723.2363268-1-daniel.vetter@ffwll.ch
Allows us to remove a bit of cleanup code.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-58-daniel.vetter@ffwll.ch
Platform drivers now have the option to have the platform core create
and remove any needed sysfs attribute files. So take advantage of that
and do not register "by hand" a sysfs file.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200517193655.3895087-2-emil.l.velikov@gmail.com
Currently the ret handling is all over the place - with two redundant
assignments and another one addressed earlier.
Use the exact same flow in both functions.
v2: straighten the code flow, instead of just removing the assignments
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-2-emil.l.velikov@gmail.com
The function always returns zero (success). Ideally we'll remove it all
together - although that's requires a little more work.
For now, we can drop the return type and simplify the drm core code
surrounding it.
v2: remove redundant assignment (Sam)
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200530124640.4176323-1-emil.l.velikov@gmail.com
When the current entry is rejected as candidate for the search
it does not mean that we can abort the subtree search.
It is perfectly possible that only the alignment, but not the
size is the reason for the rejection.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Link: https://patchwork.freedesktop.org/patch/369394/
Atm, a pending delayed destroy work during module removal will be
canceled, leaving behind MST ports, mstbs. Fix this by using a dedicated
workqueue which will be drained of requeued items as well when
destroying it.
v2:
- Check if wq is NULL before calling destroy_workqueue().
Cc: Lyude Paul <lyude@redhat.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610134704.25270-1-imre.deak@intel.com
During the initial MST probing an MST port's I2C device will be
registered using the kdev of the DRM device as a parent. Later after MST
Connection Status Notifications this I2C device will be re-registered
with the kdev of the port's connector. This will also move
inconsistently the I2C device's sysfs entry from the DRM device's sysfs
dir to the connector's dir.
Fix the above by keeping the DRM kdev as the parent of the I2C device.
Ideally the connector's kdev would be used as a parent, similarly to
non-MST connectors, however that needs some more refactoring to ensure
the connector's kdev is already available early enough. So keep the
existing (initial) behavior for now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter,
incorrectly filter out HPD short pulses with a duration less than
~540 usec, leading to MST probe failures.
According to the DP Standard 2.0 section 5.1.4:
- DP sinks should generate short pulses in the 500 usec -> 1 msec range
- DP sources should detect short pulses in the 250 usec -> 2 msec range
According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters
should detect and forward short pulses according to how sources should
detect them as specified in the DP Standard (250 usec -> 2 msec).
Based on the above filtering out short pulses with a duration less than
540 usec is incorrect.
To make such adapters work add support for a driver polling on MST
inerrupt flags, and wire this up in the i915 driver. The sink can clear
an interrupt it raised after 110 msec if the source doesn't respond, so
use a 50 msec poll period to avoid missing an interrupt. Polling of the
MST interrupt flags is explicitly allowed by the DP Standard.
This fixes MST probe failures I saw using this adapter and a DELL U2515H
monitor.
v2:
- Fix the wait event timeout for the no-poll case.
v3 (Ville):
- Fix the short pulse duration limits in the commit log prescribed by the
DP Standard.
- Add code comment explaining why/how polling is used.
- Factor out a helper to schedule the port's hpd irq handler and move it
to the rest of hotplug handlers.
- Document the new MST callback.
- s/update_hpd_irq_state/poll_hpd_irq/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com
The mgag200 driver now uses managed functions for DRM devices. The
individual helpers for modesetting and memory managed are already
covered, so only device allocation and initialization is left for
conversion.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-15-tzimmermann@suse.de
Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.
The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de
Instances of struct drm_device and struct mga_device are now allocated
next to each other in mgag200_driver_load(). Yet another preparation
before embedding the DRM device instance in struct mga_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-13-tzimmermann@suse.de
Embedding the DRM device instance in struct mga_device will require
changes to device allocation. Moving the device initialization into
its own functions gets it out of the way.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-12-tzimmermann@suse.de
Moving the initializer and cleanup functions for device instances
to mgag200_drv.c prepares for the conversion to managed code. No
functional changes are made. Remove mgag200_main.c, which is now
empty.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-11-tzimmermann@suse.de
Support for HW cursors got remove by commit 5a77e2bfdd ("drm/mgag200:
Remove HW cursor") Apparently the source file was not deleted. Removed
it now.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 5a77e2bfdd ("drm/mgag200: Remove HW cursor")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-3-tzimmermann@suse.de
So far the plane creation was done when each CRTC was bound, and those
planes were only tied to the CRTC that was registering them.
This causes two main issues:
- The planes in the vc4 hardware are actually not tied to any CRTC, but
can be used with every combination
- More importantly, so far, we allocate 10 planes per CRTC, with 3 CRTCs.
However, the next generation of hardware will have 5 CRTCs, putting us
well above the maximum of 32 planes currently allowed by DRM.
This patch is the first one in a series of patches that will take down both
of these issues so that we can support the next generation of hardware
while keeping a good amount of planes.
We start by changing the way the planes are registered to first registering
the primary planes for each CRTC in the CRTC bind function as we used to,
but moving the overlay and cursor creation to the main driver bind
function, after all the CRTCs have been bound, and make the planes
associated to all CRTCs.
This will slightly change the ID order of the planes, since the primary
planes of all CRTCs will be first, and then a pattern of 8 overlays, 1
cursor plane for each CRTC.
This shouldn't cause any trouble since the ordering between the planes is
preserved though.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/0b85a3fdb20bb4ff85fb62cabd082d5a65e2730b.1590594512.git-series.maxime@cerno.tech
The planes so far were created as part of the CRTC binding code with
each planes created associated only to one CRTC. However, the hardware
in the vc4 doesn't really have such constraint and can be used with any
CRTC.
In order to rework this, let's first move the overlay and cursor planes
creation to a function of its own.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/a378ea56214179f1f25fcd36ecc69511edd1e790.1590594512.git-series.maxime@cerno.tech
The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.
Now that we have the DT validation in place, let's split into separate
files and convert the device tree bindings for those controllers to
schemas.
This is just a 1:1 conversion though, and some bindings were incomplete so
it results in example validation warnings that are going to be addressed in
the following patches.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech
The udl driver contains an implementation of GEM vmap and mmap
operations that is identical to the common SHMEM helper; except
that udl's code uses cached pages by default.
Convert udl to regular SHMEM helper functions. There's no reason
to have udl behave differently from all other SHMEM drivers. The
udl driver uses the SHMEM helper to enable caching.
v3:
* rebased onto Daniel's shmem untangle series
v2:
* implement .gem_create_object with SHMEM helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609090820.20256-3-tzimmermann@suse.de
The helper drm_gem_shmem_create_object_cached() allocates an GEM SHMEM
object and sets the map_cached flag. Useful for drivers that want cached
mappings.
v3:
* style fixes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609090820.20256-2-tzimmermann@suse.de
Douglas Anderson