This keyboard emits a few usages that are not handled properly by
hid-input.
The usages from MSVENDOR page are colliding with Chicony Tactical
Pad device, so we have to distinguish in runtime. Ugly ...
Also, the buttons 1-5 have to be handled in a non-standard way,
as they are emitted by the keyboard in a bitfield-like fashion, but
the field is not presented as bit-field by the keyboard. The keys can't
be pressed simultaneously, so the handling we have is correct.
This patch also extends hid_keyboard[] with KPLeftParenthesis and
KPRightParenthesis as defined by Keyboard page in HUT 1.12. The
corresponding usages are also emitted by this keyboard.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are some devices (for example Dell Multimedia Keyboard SK-8135) that have
a volume control knob which generates relative events instead of absolute.
hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute
values.
Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This
patch translates relative ABS_VOLUME events into appropriate number of series
of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the
correct values in the end.
kernel.org bugzilla 5233
Reported-by: Jochen Eisinger <jochen@penguin-breeder.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This keyboard has wireless mouse which has left, middle, right buttons and
2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling
events and 11 or 12 button events at the same time.
I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper
for buttons, because , for example, there is no entry for "burn cd" in input.h.
The patch also supress 11 and 12 button events from mouse when you scroll the
wheel left and right. With this patch, only side scrolling events are
reported. (This mouse has only 4 buttons and 2D wheel. There is no such
buttons like 11 and 12.)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from
consumer page (reserved in HUT 1.12) for back and more keys. It also emits
a few usages from LOGIVENDOR page, which need adding.
Also, this device has broken report descriptor - the reported maximum is too
low - it doesn't contain the range for 'back' and 'more' keys, so we need to
bump it up before the report descriptor is being parsed.
Besides all this, it also requires NOGET quirk.
This patch does so.
[1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When comparing usb vs ps2 / testing the keycodes generated for the easy access
keys on my trust (microsoft compatible) keyboard. I noticed the search key
generated the keycode for find when connected through USB. This lead me to
check the consumer page mappings in hid-input.c . And it turns out the the
mapping for ID 0x221 deviates from the HUT standard document:
http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
Currently it is incorrectly mapped to find, whereas it should be mapped to
search. I also added missing bindings for ID 0x21f, the real find and for
0x222, goto.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons
(0x09 HID usage) and an audio connector, which just forwards the audio input
into oridinary sound card present in the computer.
Despite this fact, the only interface of this device reports itself as a
Telephony/Headset type of HID device. This is apparently incorrect - the device
itself doesn't provide any audio/telephony functionality. This is achieved in
userland application which only needs to receive the button events from the HID
driver.
This patch establishes a new quirk which forces hid-input to claim a device it
will otherwise leave untouched.
Reported-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate
"tactical pad" with 11 non-functional buttons - they generate usage
codes from 0xff00 (MSVENDOR) usage page. Special case handling for
this keyboard added, so no later clash with MSVENDOR mappings is going
to occur.
Pointed out in bugzilla #7352
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There have been many reports recently about broken HID devices, the
diagnosis of which required users to recompile their kernels in order
to be able to provide debugging output needed for coding a quirk for
a particular device.
This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it
possible to control debugging output produced by HID code by supplying
'debug=1' module parameter.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Provide hooks for getkeycode() and setkeycode() methods to
input_dev.
Signed-off-by: Marvin Raaijmakers <marvin.raaijmakers@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation for struct class_device -> struct device input
core conversion switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech MX3000 contains report descriptor which doesn't cover usages
above 0x28c, but emits such usages. Report descriptor needs fixing
in the very same way as with receivers shipped with S510 keyboards.
This patch also adds a few mappings for multimedia keys that S510 didn't
emit.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Belkin Wireless keyboard, model number F8E849KYBD, USB ID 1020:0006,
FCCID: K7SF8E849KYBD emits usages 0x03a-0x03c from Consumer usage page.
As of HUT v1.12, these are marked as reserved. If any conflict arises
later, the mapping could be made conditional on VID/PID.
Signed-off-by: Chris Clayton <chris2553@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird
non-standard way - it contains multiple reports with the same usage, which
results in remapping of GenericDesktop.X and GenericDesktop.Y usages to
GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the
touchwheel unusable.
The commit 3506897691 solved this
in a way that it didn't remap certain usages. This however breaks
(at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210),
which in contrary requires the remapping.
To make both of the harware work, allow remapping of these usages again,
and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we
disable remapping for key, abs and rel events only for this hardware.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle)
on Logitech S510 keyboard work.
Logitech S510 keyboard sends in report no. 3 keys which are far above the
logical maximum described in descriptor for given report.
This patch introduces a HID quirk for this wireless USB receiver/keyboard
in order to fix the report descriptor before it's being parsed - the logical
maximum and the number of usages is bumped up to 0x104d). The values are in the
"Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too.
In addition to proper extracting of the values from report descriptor, proper
HID-input mapping is introduced for them.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
CONFIG_INPUT_DEBUG is non-existent option, so remove anything depending
on it.
Also, as we have new CONFIG_HID_DEBUG, this should be used on places
where ifdef DEBUG was used before.
Suggested by Adrian Bunk.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidinput_{open,close}() functions do not belong to usbhid, but
to the generic HID layer. Move them, and fix hooks in struct
hid_device, so that now the callbacks are done to transport-specific
_open() functions, but not input_open() functions.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid-debug.h contains a lot of code, and should not therefore
be a header.
This patch moves the code to generic hid layer as .c source, and
introduces CONFIG_HID_DEBUG to conditionally compile it, instead
of playing with #define DEBUG and including hid-debug.h.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports
when enumerating reports on a hid-input device. Add this quirk and
HID_QUIRK_MULTI_INPUT to 0810:0001.
PantherLord Twin USB Joystick, 0810:0001 has separate input reports
for 2 distinct game controllers in the same interface, so it needs
HID_QUIRK_MULTI_INPUT. However, the device also contains one output
report per controller which is used to control the force feedback
function, and we do not want those to appear as separate input
devices as well. The simplest approach seems to be to add a quirk to
skip output reports on 0810:0001, and allow the force feedback
driver to handle those.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The apple powerbook people are used to switch the pb_fnmode
setting at runtime through writing to sysfs, altering the
module parameter value. This was broken for them in 2.6.20-rc1
when generic HID layer was introduced, as the pb_fnmode flag
was made per-hiddevice, instead of global variable.
This patch moves the pb_fnmode module parameter from usbhid module
to hid module, but apart from that retains backward compatibility
with respect to changing the mode through sysfs.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Patch adds entries to the HID consumer page for the Firefly
Mini IR remote control
Signed-off-by: Simon Bennett <simon@levanta.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no reason for generic hid-input.c to include usb-specific
input.h.
As a sideeffect, this also fixes warning of redefinition of dbg()
macro, when hid-input.c is compiled with DEBUG (as there is a clash
between dbg() from hid.h and usb/input.h).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This change introduces a mapping for LED indicators between the HID
specification and the Linux input subsystem. The previous code properly
mapped the LEDs relevant for Keyboards, but garbeled the remaining ones.
With this change all LED enums from the input system get mapped to more
or less equivalent LED numbers from the HID specification.
This patch also ensures that the unused bits in a HID report to the
device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully
usable with the linux input system.
Signed-off-by: Simon Budig <simon@budig.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes mappings for the Logitech USB BT receiver that
ships along with Logitech's DiNovo Edge keyboard. Without these
changes, the "touchwheel" does not work as intended (a mouse)
Signed-off-by: Adrian Drzewiecki <adriand@drze.net>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On USB keyboards lots of hot/internet keys are not working. This patch
adds support for a number of keys from the USB HID Usage Table
(http://www.usb.org/developers/devclass_docs/Hut1_12.pdf).
It also adds several new key codes. Most of them are used on real world
keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE,
NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes".
I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a
remote control in parallel and it makes sense to have them behave differently.
Signed-off-by: Florian Festi <ffesti@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons
and also because it logically belongs there.
Also removes empty hid-input.c file in drivers/usb/input.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- 'dev' in struct hid_device changed from struct usb_device to
struct device and fixed all the users
- renamed functions which are part of USB HID API from 'hid_*' to
'usbhid_*'
- force feedback initialization moved from common part into USB-specific
driver
- added usbhid.h header for USB HID API users
- removed USB-specific fields from struct hid_device and moved them
to new usbhid_device, which is pointed to by hid_device->driver_data
- fixed all USB users to use this new structure
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "big main" split of USB HID code into generic HID code and
USB-transport specific HID handling.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Kosina