Current audio-graph-card2-custom-sample.dtsi is missing
address-cells / size-cells / reg. Thus it get too many DT warnings.
This patch solved it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5x5qw3d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous conversion back to .probe() applied in commit 9abcd24002
("ASoC: Switch i2c drivers back to use .probe()") was created based on
v6.3. Since then two more drivers were added which need to be convert
back in the same way before eventually .probe_new() can be dropped from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230612070608.836186-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
After reordering the irq probe, the error path was not properly done.
Lets fix it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: 4cbb264d4e ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-2-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the second component fails to initialize, cleanup the first on.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to component")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-1-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Four routes "Left Playback<-sspX Tx", "Right Playback<-sspX Tx",
"sspX Rx<-Left Capture Sense", and "sspX Rx<-Right Capture Sense" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-13-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-12-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-11-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-10-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "AIF1 Playback<-sspX Tx" and "sspX Rx<-AIF1 Capture" are
created by snd_soc_dapm_connect_dai_link_widgets() automatically.
Remove the duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-9-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-8-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-7-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Left HiFi Playback<-sspX Tx" and
"Right HiFi Playback<-sspX Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-6-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The route "HiFi Playback<-sspX Tx" is created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-5-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Three routes "HDMI 0 Playback<-hdaudioB0D2-cpu0 Tx",
"HDMI 1 Playback<-hdaudioB0D2-cpu1 Tx" and
"HDMI 2 Playback<-hdaudioB0D2-cpu2 Tx" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-4-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "DMIC Rx<-Capture" and "DMIC WoV Rx<-Capture" are created
by snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two routes "Playback<-sspX Tx" and "sspX Rx<-Capture" are created by
snd_soc_dapm_connect_dai_link_widgets() automatically. Remove the
duplicate routes.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20230612110958.592674-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Walker Chen <walker.chen@starfivetech.com>:
Some minor issues were found during addtional testing and static
analysis. The first patch fix the error check for the return value of
devm_reset_control_array_get_exclusive(). The second patch drop some
unused macros.
It has CPU:Codec = 1:1 and N:N samples, but missing 1:N settings.
This patch adds it.
One note here is that because of registering timing, probing and
CPU/Codec numbering are mismatching.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ilbx1kh3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor the function so reading the data is done outside the work
function so fuzzing can pass data directly into the work callbacks.
Also expose the inner function outside the module so we can call it from
the injector.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230608221822.2825786-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit cbbc0ec6de ("ASoC: mediatek: mt8192-mt6359:
Remove " Jack" from Headphone pin name"). That commit removed the "
Jack" suffix with the reasoning that it is automatically added to the
name of the kcontrol created, which is true, but this name is also used
to look for the DAPM widget that will be toggled when the jack status is
updated. Since the widget is still called "Headphone Jack" the jack
can't link to the widget and the following error is shown:
mt8192_mt6359 sound: ASoC: DAPM unknown pin Headphone
It is not possible to also rename the headphone DAPM widget because its
name is used by a switch kcontrol, "Headphone Jack Switch", both to link
to the headphone widget and to assemble its name. This switch's name is
referenced in the upstream UCM file, so renaming it would break
userspace. Since the original commit didn't bring any benefit, besides
sparing a few CPU cycles, simply revert it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230608221050.217968-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the check for devm_reset_control_array_get_exclusive() return value.
The devm_reset_control_array_get_exclusive() function may return NULL if
it's an optional request. If optional is intended then NULL should not
be treated as an error case, but as a special kind of success case. So
here the IS_ERR() is used to check better.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230608135750.11041-2-walker.chen@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tlv320aic32x4 divider clocks implements a mux with a set_parent
hook, but doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.
However, It's hard to tell whether it's been done on purpose or not.
Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-67-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tlv320aic32x4 PLL clocks implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidate to
trigger that parent change is a call to clk_set_rate(), with
determine_rate() figuring out which parent is the best suited for a
given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The driver does implement round_rate() though, which means that we can
change the rate of the clock, but we will never get to change the
parent.
However, It's hard to tell whether it's been done on purpose or not.
Since we'll start mandating a determine_rate() implementation, let's
convert the round_rate() implementation to a determine_rate(), which
will also make the current behavior explicit. And if it was an
oversight, the clock behaviour can be adjusted later on.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-66-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The tlv320aic32x4 clkin clock implements a mux with a set_parent hook,
but doesn't provide a determine_rate implementation.
This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.
The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.
Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.
So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().
The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.
And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-46-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series performs some cleanups to the mt8188-mt6359 driver,
including usage of bitfield macros, adding definitions of register
fields and some others for readability and consistency.
clk_get_rate() returns an unsigned long, so there is no point in storing it
in a long, and test for negative values.
So, turn 'parent_rate' into an unsigned long, simplify the sanity check,
the error message and the return value, in case of error (i.e. 0).
Doing so also turns 'i' and 'valid_rates' into unsigned long, but it is
fine and harmless.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/53f928290f08f50ff43031e17fe1d88443c2c441.1686202022.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace open coded instances of FIELD_GET() with it, move register
definitions at the top of the file and also replace magic numbers
with register definitions.
While at it, also change a regmap_update_bits() call to regmap_write()
because the top 29 bits of AUD_TOP_CFG (31:3) are reserved (unused).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change some dev_info prints to dev_err() and some to dev_dbg(),
depending on the actual severity of them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change all instances of `return ret` to `return 0` at the end of
functions where ret is always zero and also change functions
mt8188_{hdmi,dptx}_codec_init to be consistent with how other
functions are returning errors
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This code triggers a Smatch static checker warning and does sort of
look like an error path.
sound/soc/mediatek/mt8188/mt8188-mt6359.c:597 mt8188_max98390_codec_init() warn: missing error code? 'ret'
However, returning 0 is intentional. Make that explicit.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Those entries fit in one line: compress them to reduce line count.
While at it, also add the sentinel comment to the last entry.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230608084727.74403-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use existing define for WSA883X_GLOBAL_PA_ENABLE instead of hard-coded
value, just like in other places in this driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230607171326.179527-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One removal of a non-existent Kconfig initialization and one
correction to enable SoundWire link when no HDaudio external codec is
detected. This will generate more information and help resolve cases
where the ACPI information is incorrect.
Merge series from Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>:
A "known issue" during implementation of SE DMA for spi geni driver was
that it does DMA map/unmap internally instead of in spi framework.
Current patches remove this hiccup and also clean up code a bit.
Testing revealed no regressions and results with 1000 iterations of
reading from EC showed no loss of performance.
Results
=======
Before - Iteration 999, min=5.10, max=5.17, avg=5.14, ints=25129
After - Iteration 999, min=5.10, max=5.20, avg=5.15, ints=25153
The 'hda_disable_rewinds' kernel parameter is initialized with a
non-existent CONFIG_SND_SOC_SOF_HDA_DISABLE_REWINDS.
We probably forgot to clean this up when this Kconfig option was
removed when upstreaming in 2021.
Reported-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The functionality described in Commit 61bef9e68d ("ASoC: SOF: Intel: hda: enforce exclusion between HDaudio and SoundWire")
does not seem to be properly implemented with two issues that need to
be corrected.
a) The test used is incorrect when DisplayAudio codecs are not supported.
b) Conversely when only Display Audio codecs can be found, we do want
to start the SoundWire links, if any. That will help add the relevant
topologies and machine descriptors, and identify cases where the
SoundWire information in ACPI needs to be modified with a quirk.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230606222529.57156-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using get_stream_cpu() to get CPU stream which cares
Codec2Codec. But it is static function for now, and we want to use it
from other files. This patch makes it global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs7cj9mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
An unusually large set of patches to deal with new SoundWire-based
platforms.
The bulk of the patches addresses support for MTL using RT712, RT713,
MAX98363, CS42L42 jack codec and amplifiers. The sof_sdw machine
driver had to be updated to remove limitations on number of codecs per
links, dai types, dai naming, etc. We also moved parts of the Realtek
and Maxim support in common code to avoid duplication.
Community users also reported two Dell SKUs which were not supported
in the mainline due to hardware permutations.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
In the series, we extend the capability of mt8188-mt6359 driver.
The following changes are included.
1. Divide ADDA BE dai into two dais for SOF.
2. Register hdmi/dp jack pins.
3. dai_fmt can be configured from device tree.
4. Add some I2S codecs support.
In addition, new compatible string "mediatek,mt8188-nau8825" is
included for a new board support.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset adds the changes required for the hda-dai extension to
deal with SSSP/DMIC/SoundWire starting with LunarLake, as well as the
new TLV IPC to provide the DMA stream_tag to the DSP firmware.
LunarLake support for SSP/DMIC is ready but is gated by the patch
"ASoC: SOF: Intel: shim: add enum for ACE 2.0 IP used in LunarLake"
currently only present in the SoundWire tree.
The register changed with the HDaudio integration, the information is
present in the extended link descriptor and not in the SHIM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions can be used for newer LNL hardware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a DMA config TLV structure and the relevant code to
copy this TLV after the gateway configuration. For now this is an
iso-functionality change, the TLVs are not configured just
yet. Additional patches will be needed for DMIC/SSP/ALH (aka
SoundWire).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting with LunarLake, the DMIC/SSP/SoundWire audio interfaces will
use the HDaudio DMA. This patch adds the DMA configuration structure
to be passed as a TLV appended at the end of each gateway
configuration.
This patch only provides the definitions for now, the TLV will be
added in the actual blobs separately for each interface.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LunarLake introduces a new TLV blob passed to the firmware for DMA
configuration. This TLV structure is directly inspired by the ALH
multi-gateway structure used so far. This patch suggest a transition
to the more abstract structure with no references to ALH.
This is an iso-functionality redefinition of structure, the TLV will
be added in a follow-up patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away.
This patch hides the mechanism to determine the multi-link structure
related to the DAI and program the LOSIDV register. An added benefit
is that we can remove all references to the codec DAI from what should
be a CPU dai configuration only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted away.
This patch hides the stream format setup which is currently completely
related to the HDaudio codec setup - not something that will work for
other types of DAIs.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code for HDAudio DAIs cannot be extended to other types
of DAIs, specific programming sequences need to be abstracted
away. Start here with hiding the stream_tag needed by the HDAudio
codec_dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports several NULL
pointer dereference paths.
Example log:
ops = hda_dai_get_ops(substream, cpu_dai);
| | ^~~~~
| | |
| | (14) return of NULL to ‘non_hda_dai_hw_params’ from ‘hda_dai_get_ops’
| 353 | sdev = widget_to_sdev(w);
| 354 | hext_stream = ops->get_hext_stream(sdev, cpu_dai, substream);
| | ~~~~~~~~~~~~~~~~~~~~
| | |
| | (15) dereference of NULL ‘ops’
The function hda_dai_get_ops() can return NULL, but the return value
is not checked across the board. It's not a problem today, since we do
check in the first use of the function, but static analysis tools are
not aware of the different ALSA stages. Rather than argue forever,
let's just add the error checks consistently and make sure this tool
can be added to the CI checks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230602205620.310879-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for MAX98363 soundwire codec. Update build
configuration to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Init function and structure names are modified to use maxim
instead of max98373. Card components and speaker names are
updated based on part id.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is needed to use the common implementation for other maxim
soundwire codecs
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Helper functions added to support CS42l42 soundwire codec.
Build configuration is updated to include this codec.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Corrected the author name camel case and initial.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving amp only boards into end of the match table to have
better order and maintenance.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the products doesn't have onboard
I2S codec.but need to support HDMI-In capture via I2S and audio playback
through HDMI/DP monitor.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support multiple codecs per SoundWire link, we have to assign multiple
CPU DAIs to different DAI links sharing the same physical link. This is
not possible with the existing code since we assume that only 'Pin2' is
used for playback and 'Pin3' used for capture - additional DAIs cannot
be handled.
This patch enables more CPU DAIs to be used, e.g. "SDW0 Pin2",
"SDW0 Pin3", and "SDW0 Pin4" for SDW0-Playback-SimpleJack,
SDW0-Capture-SimpleJack, and SDW0-Playback-SmartAmp DAI links on physical
link #0.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt713 is rt712 but without amp.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rt712 is a multi function codec which shpports headset, amp, and dmic
functions. Rt712 has two sdw interfaces and codec drivers, one for jack
and amp, the other for dmic. part id 0x712 is for jack and amp, and 0x1712
is for dmic.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Let rename rt711_sdca to rt_sdca_jack and let it be used for all
Realtek sdca jacks.
The commit uses component->name_prefix to construct card->components,
and determine which codec it is. So, we have to set name_prefix
properly.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jack Detection source can be applied to all jacks, not only rt711.
No function changes.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
if (!SOF_RT711_JDSRC(sof_sdw_quirk)) is tested in rt711_sdca_add_codec_
device_props(), and we don't add software node to the device if jack
source is not set. We need to do the same test in
sof_sdw_rt711_sdca_exit(), and avoid removing software node if jack
source is not set.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A codec may support multiple dais for different purpose. For example,
the rt712 codec supports jack and amp on different dais and machine
driver needs to create different dailink for those dais.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We append codec type to dailink name to distinguish different dailink
on the same sdw link and direction. But we could create multi dailinks
for a codec and the dailink name will be duplicated if we append codec
type to the dailink name.
Appending dai type instead of codec type can solve the issue.
For example, if a codec supports JACK on dai 0 and AMP on dai 1, the
existing code will create dailinks
SDW0-Playback-SimpleJack or SDW0-Playback-SmartAmp for both dailinks,
and it will be SDW0-Playback-SimpleJack for dailink 0 and
SDW0-Playback-SmartAmp for dailink 1 after this change.
Then codec type is not used any more and can be removed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
codec_info_list[codec_index] is used multiple times in the
create_sdw_dailink() function. Adding a codec_info pointer to shorten
the code. This is a preparation for the following up patches.
No function changed.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we assign dailink ids in order, and shift with codec type.
The purpose is to have consistent dailink ids for topologies.
This can be simplified if we have a predefined dailink id in
sof_sdw_dai_info.
We reuse the existing ids as the predefine ids. So the dailink ids will
not be changed by this commit.
With this change, we no longer need to check the adr order described in a
snd_soc_acpi_link_adr array.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code create a dailink for a codec. However, we may need
multi dailinks for a codec. This commit adds a new struct in
sof_sdw_codec_info{} to store the dai info of a codec.
The initial assumption if that we will create at most 3 dailink types
for a codec, since this is the max known with upcoming SDCA devices. We
may need to increase this number as new SDCA 'functions' become available.
One strong assumption is that all dailinks exposed are independent, as per
SDCA directions.
This commit just moves some items into the new sof_sdw_dai_info struct.
There is no function changed. Multi dais supported will be added in the
follow up commits.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602202225.249209-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230605085839.2157268-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb7 ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds multiple i2s codecs support including NAU88L25,
MAX98390, and the dumb amp like NAU8318 usage. In addition, dmic-codec
is also added to skip the beginning pop noise.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230526093150.22923-7-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a widget is added to dapm via snd_soc_dapm_new_widgets,
dapm_debugfs_add_widget is also called to create a corresponding debugfs
file. However, when a widget is freed by snd_soc_dapm_free_widget, the
corresponding debugfs is not cleared. As a result, the freed widget is
still seen in the dapm directory.
This patch adds dapm_debugfs_free_widget to free the debugfs of a
specified widget, and it's called at snd_soc_dapm_free_widget to clean
up the debugfs for freed widget.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two changes included in the patch.
First, add set_dailink_daifmt() function, so dai_fmt can be updated by
the configuration in dai-link sub node.
Second, remove codec phandle from required property in dai-link sub node.
For example, user possibly needs to update dai-format for all etdm
co-clock dai-links, but codec doesn't need to be specified in capture
dai-link for a speaker amp.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some userspace applications need jack control events, so register hdmi
and dp jack pins to activate jack control events.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MT8188 will support SOF. In SOF, be_hw_params_fixup callback are used to
configure BE hardware parameters. However, playback and capture stream
share the same callback function in which it can't know the stream type.
It's possible to require different parameters for playback and capture
stream, so separate them into two dais for SOF usage.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230526093150.22923-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.
For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code in asoc_simple_startup was treating any non-zero return from
snd_pcm_hw_constraint_minmax as an error, when this can return 1 in some
normal cases and only negative values indicate an error.
When this happened, it caused asoc_simple_startup to disable the clocks
it just enabled and return 1, which was not treated as an error by the
calling code which only checks for negative return values. Then when the
PCM is eventually shut down, it causes the clock framework to complain
about disabling clocks that were not enabled.
Fix the check for snd_pcm_hw_constraint_minmax return value to only
treat negative values as an error.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20230602011936.231931-1-robert.hancock@calian.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Walker Chen <walker.chen@starfivetech.com>:
This patchset adds TDM audio driver for the StarFive JH7110 SoC. The
first patch adds device tree binding for TDM module. The second patch
adds tdm driver support for JH7110 SoC. The last patch adds device tree
node and pins configuration of tdm to JH7110 dts.
The series has been tested on the VisionFive 2 board by plugging an
audio expansion board.
For more information of audio expansion board, you can take a look
at the following webpage:
https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
These patches concern modifications made in mt8186[1]. The clock
unregistration mechanism used in mt8188 and mt8195 is similar with
mt8186, resulting in the same problem existing within the driver.
Therefore, the solution has also been applied to these two platforms.
[1] https://lore.kernel.org/all/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid/
The dma pointer must be set to the passed stream pointer, even
if that pointer is NULL.
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230601124907.3128170-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX98363 does not support 32bit depth audio.
Removed 32bit from the supported format list.
Instead, added 16bit and 24bit to the list.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230601130600.25344-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 and mt8186 .dbg_dump callback to print some information when
DSP panic occurs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601034939.15802-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8195_afe_init_clock(), mt8195_audsys_clk_register() was called
followed by several other devm functions. At mt8195_afe_deinit_clock()
located at mt8195_afe_pcm_dev_remove(), mt8195_audsys_clk_unregister()
was called.
However, there was an issue with the order in which these functions were
called. Specifically, the remove callback of platform_driver was called
before devres released the resource, resulting in a use-after-free issue
during remove time.
At probe time, the order of calls was:
1. mt8195_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8195_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, we can utilize devm_add_action_or_reset() in
mt8195_audsys_clk_register() so that the remove order can be changed to
3->2->1.
Fixes: 6746cc8582 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During mt8188_afe_init_clock(), mt8188_audsys_clk_register() was called
followed by several other devm functions. The caller of
mt8188_afe_init_clock() utilized devm_add_action_or_reset() to call
mt8188_afe_deinit_clock(). However, the order was incorrect, causing a
use-after-free issue during remove time.
At probe time, the order of calls was:
1. mt8188_audsys_clk_register
2. afe_priv->clk = devm_kcalloc
3. afe_priv->clk[i] = devm_clk_get
At remove time, the order of calls was:
1. mt8188_audsys_clk_unregister
3. free afe_priv->clk[i]
2. free afe_priv->clk
To resolve the problem, it's necessary to move devm_add_action_or_reset()
to the appropriate position so that the remove order can be 3->2->1.
Fixes: f6b026479b ("ASoC: mediatek: mt8188: support audio clock control")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601033318.10408-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to manage HSD feature for power saving. The detail is to
disable HSD feature after the headset detection is done. When the jack
is inserted, the HSD feature will be enabled again.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230531075334.168637-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture, and then, we can use playback/capture_only flag (X)(Y).
(A) static int soc_get_playback_capture(...)
{
...
(X) if (dai_link->playback_only) {
(*) *playback = 1;
*capture = 0;
}
(Y) if (dai_link->capture_only) {
*playback = 0;
(*) *capture = 1;
}
...
}
But this flag should not have effect to opposite side stream (*).
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sfbezlq8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
for_each_xxx(...) {
if (xxx)
return -EINVAL;
=> *playback = 1;
...
=> *capture = 1;
...
}
...
}
But, it is directly updating playback/capture which is the result of this
function even though it might be error. It should be updated in case of
succeed only. This patch updates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87ttvuzlqe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) checks dai_link status, and indicate error
if it was not matching (B).
(A) static int soc_get_playback_capture(...)
{
...
^ if (dai_link->dynamic && dai_link->num_cpus > 1) {
| dev_err(rtd->dev,
(B) "DPCM doesn't support Multi CPU for Front-Ends yet\n");
| return -EINVAL;
v }
...
}
We can use 100 char for 1 line today. This patch cleanup error code line.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v8gazlqk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) is using rtd->dai_link->xxx everywhere.
Because of that, 1 line is unnecessarily long and not readable.
(A) static int soc_get_playback_capture(...)
{
if (rtd->dai_link->dynamic ...) {
^^^^^^^^^^^^^
...
} else {
int cpu_capture = rtd->dai_link->c2c_params ?
^^^^^^^^^^^^^
...
}
if (rtd->dai_link->playback_only) {
^^^^^^^^^^^^^
...
}
...
}
This patch uses variable "dai_link" to be clear code.
Nothing changes the meanings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wn0qzlqp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_get_playback_capture() (A) returns number of substreams for
playback/capture (B).
ASoC will probe the Sound Card and mapps CPU<->Codec pair.
(A) static int soc_get_playback_capture(...,
(B) int *playback, int *capture)
{
...
if (rtd->dai_link->playback_only) {
*playback = 1;
*capture = 0;
}
if (rtd->dai_link->capture_only) {
*playback = 0;
*capture = 1;
}
(C)
return 0;
}
But it might be no playback no capture if it returns playback=0, capture=0.
It is very difficult to notice about it. This patch indicates error at (C)
then.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87y1l6zlqx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Thinkpad Neo14 Ryzen Edition uses Ryzen 6800H processor, and adding to
quirks list for acp6x will enable internal mic.
Signed-off-by: Sicong Jiang <kevin.jiangsc@gmail.com>
Link: https://lore.kernel.org/r/20230531090635.89565-1-kevin.jiangsc@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series handles a few issues related to the ES8316 audio
codec, discovered while doing some testing on the Rock 5B board.
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The topology file and the machine driver rely on common definitions
for the dailink stream_name. To avoid any backwards-compatibility
problems, the machine driver stream names are set in stone and cannot
be modified.
This is problematic when we try to name some of the topology widgets
after the stream_name, since the widget name is limited to 44
characters
tools/include/uapi/sound/asound.h:#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN 44
Existing examples include "Analog Playback and Capture" for HDaudio
dailinks, which leaves less than 20 chars to identify widgets/controls
with a meaningful name.
Since the 44-char limit is part of the UAPI definitions, we assumed
there is no way to increase it.
This patchset suggests instead a partial match which allows topology
files to use a shorter stream_name, which in turn allows for
self-explanatory widget names that comply with the 44-char limit.
This should not break any existing setup but with the introduction of
a partial match new dailinks should be named carefully to avoid
confusions between e.g. 'link1' and 'link10'. The last patch fixes
such an issue in the 'nocodec' test topology used by Intel.
With a common kernel config for nocodec and codec modes, the number of DAI
drivers will be set to 15 for nocodec as well. So adjust this when set
the machine params for the nocodec mode if the debug flag is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows setting shorter names for the widget stream names in
topology. For example, in the case of HDA Analog DAI link, the stream
name is "Analog Playback and Capture". But it is enough to match "Analog"
in the DAI link stream name with a widget's stream name. This is needed
to set more meaningful names for the DAI widgets using the stream name
in topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This allows for setting shorter link names in topology. For example,
for the HDA Analog DAI link, just "Analog" would suffice instead of
"Analog Playback and Capture"
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230526204149.456068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pcm_for_each_format for the PCM format iteration and fix the
following sparse warnings.
sound/soc/ti/davinci-mcasp.c:1336:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1358:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/ti/davinci-mcasp.c:1438:26: sparse: warning: restricted snd_pcm_format_t degrades to integer
No functional changes.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20230519211636.3699-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have SOF and generic ACP support enabled for Vangogh platform
on some machines. Since we have same PCI id used for probing,
add check for machine configuration flag to avoid conflict with
newer pci drivers. Such machine flag has been initialized via
dmi match on few Vangogh based machines. If no flag is
specified probe and register older platform device.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230530110802.674939-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 dai driver and specify of_machine to support mt8188 audio.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523025933.30494-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sending the mutex address(acp_lock) as platform
data during ACP PDM platform driver register sequence,
its creating copy of the platform data.
Referencing this platform data in ACP PDM driver results
incorrect reference to the common lock usage.
Instead of directly passing the lock address as platform
data, retrieve it from parent driver data structure
and use the same lock reference in ACP PDM driver.
Fixes: 45aa83cb93 ("ASoC: amd: ps: use acp_lock to protect common registers in pdm driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230525113000.1290758-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An earlier simplification to only pass the direction is no longer
suitable, all the ACE2.x HDaudio DMA management relies on access to
the substream structure.
This patch is an iso-functionality change, the HDaudio DMA parts will
be provided separately.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-23-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use new helper and interface to make sure the HDaudio and SoundWire
parts use the same mutex when accessing shared registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The hdac_bus pointer is used to access the extended link information
and handle power management. Pass it from the SOF driver down to the
auxiliary devices.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous settings are not applicable, use a flag to determine what
the register layout is.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the new enum needed for SoundWire IP selection. The LunarLake PCI
descriptors and DSP parts will be added at a later time.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230515071042.2038-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the error path, a of_node_put() for platform is missing.
Just add it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 4.8Mhz 9.6Mhz and 19.2MHz SCLK values
for MCLK 12MHz and 12.288MHz requested by Intel.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230524125236.57149-1-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523165414.14560-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmRqh6weHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGXr0H/05UPv+bGw0xIFkj
5sE/uAsEbcQFFm8nsK9/03PUXGpYGNvDS2HO2rfsV0KNJSQDAS1TvXkh3D1S0v6D
ae28lkSl3Nn7YcOQGtdHZp2tSWlP0N0OE6tJlDzM/Q6AcbeoBHlVCg5EJzgd+op6
ScJwUmlwot2jZlYo6UTelr2v0j+C1Hj/t+sqTLY4bqXEybNrJmJDYhRayiqTps+h
+ypOSWdg8paq6UZBoYz0PiomV+E2gXvXtSeVtST9QmpGK9RwvglLB/wkbl+sYNW2
KbAZVrh/Orcm+bKguwf357pwc1Z59aI8/uFgOO8Om5nb4WrE/q7PNyxAHqAzxZDD
UyGwk+g=
=ZihJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRt4J4ACgkQJNaLcl1U
h9DdwAf9G2RRwBf09X767dqIr41cgEG2NWTVX6/4cnFBZhM2uibVpSXZGOd9D+JX
j+wo9gIXYfLlOA5p2AJyxTy5310UZCqea+k9kZ9pFv1gkQlZrGcsvDERNWsWj7Ub
i2bNQyFE54SEfAPNQYtK/Jr5ZOW6/vn0XKALXjosImm03khTCas7zh+YyEJVftbL
ENS/DCCDwpVi54Eud+gN3CHwBIQus3s8c0nVqXOik4teSP2Bo4PFR3LE2zhZxdM0
w9JWSCDjtiPd2tQ5hQ+FokTeJwEFX1JVWIwvfOUeUabaxB5jrDmfFafi91HUwi+W
ZWkWQ+d1oIEAkuAUySUaNQsD01UcqA==
=ywFe
-----END PGP SIGNATURE-----
regulator: Merge up v6.4-rc3
Merge up v6.4-rc3 in order to get fixes to improve the stability of my
CI.
Merge series from David Rau <David.Rau.opensource@dm.renesas.com>:
This patchset adds the support of DA7219 Jack insertion detection
polarity selection.
The first patch replaces the old txt binding with a new schema binding.
The second patch adds `dlg,jack-ins-det-pty` property for Jack
insertion detection polarity selection.
The last patch adds the driver support for this topic.
The series has been verified on the DA7219 development kit.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>:
This patch series provides better handling of cases where sending
a data blob to FW results in a validation error.
In this case we restore to the last good known value instead of keeping
the data that firwmare rejected.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The patch series includes a kselftest fix and changes for extending
driver capability to support more use cases.
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Series removes the pm_runtime.h inclusion in files where
APIs exported though pm_runtime.h are not used. In case
of files that make use of pm.h which comes form pm_runtime.h
added patch 2/2.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The following series will enable multicore support on MTL platforms similarly
to other Intel platforms.
The TGL patch is included to simplify the core_put implementation.
Multicore support can be enabled by updated topologies, with current set of
tplg files this series is not introducing any runtime change.
Originally, lineout playback source can only be DAC_3RD. Some SoC
masters only support stereo MTKAIF outputs, so lineout path can't be
used in such case.
MTKAIF connections are as follows.
MOSI0 -> DAC_L
MOSI1 -> DAC_R
MOSI2 -> DAC_3rd
In the patch, lineout playback source can be chosen between DAC_L and
DAC_3rd, so sound can be outputted via lineout even though SoC only
supports stereo MTKAIF outputs.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kselftest tries to read/write the default value. The default register
value of playback gain is 0x1F(mute), but max gain we specified is 0x12.
The range of the control is 0x0~0x12 and mute(0x1F) is only used in the
driver internally. To solve the problem, implement a new callback
mt6359_get_playback_volsw to report user configured volume instead of
the register value.
In addition, update max of "Headset Volume" to 0x12, so it can match the
maximum seen on latest data sheet.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are three output data pins MISO0, MISO1 and MISO2 for mt6359.
UL_SRC should be enabled when MISO0 or MISO1 is used, and UL_SRC_34
should be enabled when MISO2 is used.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20230508071532.21665-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function is improved in the way that if the firmware returns a
validation error on the newly sent bytes, then the kernel will
automatically restore to the old bytes value for a given kcontrol.
This way, if the firmware rejects a data blob then the kernel will also
reject it, instead of saving it for the next suspend/resume cycle. The
old behaviour is that the kernel would save it anyway and on next
firmware boot it would apply the previously-rejected configuration,
leading to errors during playback.
Additionally, the function also saves previously validated
configurations, so that if the firmware does end up rejecting a new
bytes value the kernel can send an old, previously-valid configuration.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230503081049.73847-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support of selecting insertion detection polarity
- Default polarity (Low)
- Inverted polarity (High)
Correct the keywords of parsing `dlg,jack-det-rate`
bases on the new DT binding.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230523161821.4260-4-David.Rau.opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_ipc4_pre_trigger() has two issues:
1. In the default case, we are returning without unlocking the mutex.
2. In case SNDRV_PCM_TRIGGER_STOP: when ret is less than zero it goes
to out, unlocks but returns zero instead of a negative value.
Fix this by changing the final return value to 'ret' instead of zero,
and initialize 'ret' to zero in the start of the function.
Fixes: 225f37b578 ("ASoC: SOF: ipc4-pcm: reset all pipelines during FE DAI hw_free")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230519064404.1659637-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value from the call to sof_ipc4_get_valid_bits() is int.
However, the return value is being assigned to an unsigned
int variable 'out_ref_valid_bits', so making it an int.
Eliminate the following warning:
./sound/soc/sof/ipc4-topology.c:1537:6-24: WARNING: Unsigned expression compared with zero: out_ref_valid_bits < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4985
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230516081116.71370-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware may do context saving before powering off primary core, so driver
needs to send ipc msg by set_core_state. In IPC4 path, firmware needs to
save current context to IMR before powering off primary core. Firmware
does nothing for set_core_state message in IPC3 path. So IPC4 and IPC3
can share the same operation sequence.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In core_get case, driver can power up primary core and don't need to send
ipc message to fw. Non-primary core should be powered up by fw with ipc
message.
In core_put case, driver should first send ipc message to fw to disable dsp
core then power down primary core if the target is primary core.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230523103217.20412-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where runtime PM support is
not implemented. Use pm.h instead as suspend to RAM specific
implementation is available.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230517094903.2895238-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not include pm_runtime.h header in files where APIs exported by
pm_runtime.h are not used.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> # for omap-mcbsp-st.c
Link: https://lore.kernel.org/r/20230517094903.2895238-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding pre-charge actions to make FEPGA power stable faster. It
improve the recording quality at the beginning. Thus, it is also
meaningfully to decrease the final adc delay time.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230523083303.98436-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Series of patches cleaning up error messages when loading topology. In
few places instead of logging in place of failure message is logged in
caller. Additionally there are places where both caller and failing
function log error, leading to unnecessary logs. Clean all of the above
up.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The MOD_INIT_INSTANCE message contains a CPC (Cycles Per Chunk/processing unit)
parameter.
This CPC value is used by the firmware to calculate the total cycles needed by
the enabled module instances and based on this it can decide to set the
frequency of the DSP core(s).
The manifest section of the firmware image contains a module configuration
section, where a per module table of configurations are listed with measured
CPC values as triplet of IBS/IBS/CPC (Input/Output buffer size - corresponding
to the selected audio format).
In case the CPC value is 0 (missing from the manifest or the
configuration cannot be matched) the firmware will force the DSP cores
to maximum speed to avoid audio glitches due to starvation. In these
cases the kernel will print a warning message to let the SOF developers
know about the gap and provide information to correct it with a firmware
update.
Kernel coding guidelines recommend to not split string unnecessarily.
While at it adapt the other print present in the function to 100
characters line limit.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify code by logging any errors in function that does the actual
work instead of doing so in its callers.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230519195611.4068853-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The manifest's firmware module configuration section contains the measured
CPC values along with a matching IBS/OBS values.
The CPC can be looked up by looking for a matching IBS/OBS entry.
In case of multiple matches we will use the highest CPC value.
If there is no mod_cfg or no CPC value (all 0) or no match was found then
print warning message and use 0 as CPC value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stop parsing the CPC value from topology to module_base_cfg.
The CPC value is only set for few modules in topology which makes the CPC
handling inconsistent.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename sof_ipc4_update_pipeline_mem_usage() to
sof_ipc4_update_resource_usage() in order to be re-usable for generic
resource storage, calculation of a module, like CPC adjustment.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Save a pointer to the firmware module configuration area in
sof_ipc4_fw_module struct for later use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bss_size is only set, but not used by the code, remove it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230522101313.12519-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constraint functions have return values, they should be checked for
potential errors.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All IPCs using instance_id use 8 bit value. Original commit used 16 bit
value because FW reports possible max value in 16 bit field, but in
practice FW limits the value to 8 bits.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Configurations with multiple codecs attached to the platform are
supported but only if each from the set is different. Add new field
representing the 'Unique ID' so that codecs that share Vendor and Part
IDs can be differentiated and thus enabling support for such
configurations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is
reserved for 'C7_1' instead.
Fixes: 580a5912d1 ("ASoC: Intel: avs: Declare module configuration types")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path and its components should be accessed under lock to prevent
problems with one thread modifying them while other tries to read.
Fixes: c8c960c109 ("ASoC: Intel: avs: APL-based platforms support")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When changing value of kcontrol, FW module to which data should be send
needs to be found. Currently it is done in improper way, fix it. Change
function name to indicate that it looks only for volume module.
This allows to change volume during runtime, instead of only changing
init value.
Fixes: be2b81b519 ("ASoC: Intel: avs: Parse control tuples")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
First two patches are bugfixes.
Third patch skips the overhead of rebooting the amp after applying
firmware files when we know that it isn't necessary.
If the device is in secure mode it's unnecessary to send a SHUTDOWN and
SYSTEM_RESET around the firmware download. It could only be patching
insecure tunings. A tuning patch doesn't need a SHUTDOWN and only needs
a REINIT afterwards. This will reduce the overhead of exiting system
suspend in secure mode.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-4-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire bus accesses must be performed under the guard of a pm_runtime
request, in this case the write was being performed just after the
request had been put() and so the bus could not be guaranteed to be
available.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-3-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Each time we go through dsp_work() it does a devm_kasprintf() to
allocate memory to hold the part name string. It's not strictly a memory
leak because devm will free it all if the driver is removed. But we keep
allocating more and more memory to hold the same string.
Move the allocation so that it is performed after the version and
secured state information is gathered and handle allocation errors.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/Message-Id: <20230518150250.1121006-2-rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Paweł Anikiel <pan@semihalf.com>:
The Google Chameleon v3 is a device made for testing audio and video
paths of other devices. This patchset adds support for ASoC audio on
this device. It has two audio sources: HDMI audio from the it68051 chip
(RX only), and analog audio from the ssm2603 chip (RX and TX).
The patchset adds the ASoC platform and codec drivers.
In the BE hw_params configuration, the existing code checks if any of the
existing FEs are prepared, running, paused or suspended - and skips the
configuration in those cases. This allows multiple calls of hw_params
which the ALSA state machine supports.
This check is not handled for the prepare stage, which can lead to the
same BE being prepared multiple times. This patch adds a check similar to
that of the hw_params, with the main difference being that the suspended
state is allowed: the ALSA state machine allows a transition from
suspended to prepared with hw_params skipped.
This problem was detected on Intel IPC4/SoundWire devices, where the BE
dailink .prepare stage is used to configure the SoundWire stream with a
bank switch. Multiple .prepare calls lead to conflicts with the .trigger
operation with IPC4 configurations. This problem was not detected earlier
on Intel devices, HDaudio BE dailinks detect that the link is already
prepared and skip the configuration, and for IPC3 devices there is no BE
trigger.
Link: https://github.com/thesofproject/sof/issues/7596
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Many SoundWire CODEC drivers store the device status in a member
variable in the driver data but never reference this, and in any case
the SoundWire core stores this information for drivers so it would be
redundant even if used.
Function jack_kctl_name_gen() will remove the redundant " Jack" from
the name, if present, and then it will add it back, so that all of
the controls are named "(pin-name) Jack".
Remove " Jack" from the Headphone pin name to spare some CPU cycles.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230517151516.343037-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
Driver in its update status callback stores Soundwire device status in
state container but it never uses it later. Simplify the code a bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230518072753.7361-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org
The rt5682 driver switches its regmap to cache-only when the
device suspends and back to regular mode on resume. When the
jack detect interrupt fires rt5682_irq() schedules the jack
detect work. This can result in invalid reads from the regmap
in cache-only mode if the work runs before the device has
resumed:
[ 56.245502] rt5682 9-001a: ASoC: error at soc_component_read_no_lock on rt5682.9-001a for register: [0x000000f0] -16
Disable the jack detection interrupt during suspend and
re-enable it on resume. The driver already schedules the
jack detection work on resume, so any state change during
suspend is still handled.
This is essentially the same as commit f7d00a9be1 ("SoC:
rt5682s: Disable jack detection interrupt during suspend")
for the rt5682s.
Cc: stable@kernel.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org
Link: https://lore.kernel.org/r/20230516164629.1.Ibf79e94b3442eecc0054d2b478779cc512d967fc@changeid
Signed-off-by: Mark Brown <broonie@kernel.org
When we run syzkaller we get below Out of Bounds error.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110
Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144
CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W
Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
Call trace:
dump_backtrace+0x0/0x4ec
show_stack+0x34/0x50
dump_stack_lvl+0xdc/0x11c
print_address_description+0x30/0x2d8
kasan_report+0x178/0x1e4
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf8/0x5a0
_regmap_read+0x45c/0x86c
_regmap_update_bits+0x128/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_put_dec_enum+0x1d0/0x268
snd_ctl_elem_write+0x288/0x474
By Error checking and checking valid values issue gets rectifies.
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com
Link: https://lore.kernel.org/r/20230511112532.16106-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org
use snd_pcm_format_t instead of unsigned int to fix
the following sparse warnings:
sound/soc/tegra/tegra210_adx.c:125:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/tegra/tegra210_adx.c:128:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
sound/soc/tegra/tegra210_adx.c:131:14: sparse: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com
Link: https://lore.kernel.org/r/20230516223700.185569-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Improve the logic to account for the current restrictions in topology while
making it extensible for future topology modifications.
The current topology definitions assume that input/output formats come in pairs.
For example even if there's only 1 output format for a module, we add 3 output
formats to match that of the input format count with the same parameters.
This is unnecessary but we have to deal with it until the topologies are
modified. Additionally, choosing the input/output audio format should
depend only on the pipeline params or the runtime FE hw_params depending
on where the module is in the pipeline.
This series modifies the logic for selection based on this and removes
unnecessary dependencies between the input and output formats.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
The series of patches consists of four major changes.
First, remove redundant supply for ADDA DAI dirver. Second, revise ETDM
control including APLL dynamic switch via DAPM, so APLL can be enabled
when it is really required. Third, update AFE probe function. Bus
protection change was dropped at the previous patch because the dependent
change was not accepted at that time. Finally, correct some binding errors
and add required clocks.
Split rk808 into a core and an i2c part in preparation for
SPI support.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The HDAudio support has not changed much since CometLake/2019: the
code was reshuffled for IPC4 support and we used hdac_hda for external
and Display Audio codec, but the hda-dai code was only used for
HDAudio codecs.
In the LunarLake architecture, all endpoints (HDaudio, SSP, DMIC,
SoundWire) are handled with the HDaudio DMA, which requires us to
revisit the definitions of HDA_LINK, and remove the mutual exclusion
between NOCODEC and HDA_LINK: we do want the ability to test SSP/DMIC
in NOCODEC mode even with an HDA DMA.
This code change exposed a number of issues, with a useless .prepare
callback, a DAI number mismatch and the need to support SoundWire
which is handled by a different component in
drivers/soundwire/intel_ace2.c.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional testing with multiple links and multiple DAI types, we
found a couple of mistakes with refcounts, base address, missing
initialization.
A new helper was also added due to a change in the SoundWire
programming sequences, with the host driver in charge of setting up
the DMA channel mapping instead of the firmware.
Do not reset pipelines during the stop/suspend triggers in the BE DAI
ops as the BE DAI pipeline needs to be left in the PAUSED state. It should
only be reset during hw_free. This simplification is already done for
the FE pipelines and the DAI trigger only toggles the states between
PAUSED and RUNNING.
But because the FE DAI hw_free is invoked first and all the pipelines are
freed during this op, we need to make sure that the BE DAI pipeline also
gets reset before it is freed. So do not skip the pipelines that have the
skip_during_fe_trigger flag set when resetting pipelines.
Also, because the pipeline state changes are split between the FE and BE
DAI ops now, protect the BE DAI pipeline state changes with the
pipeline_state_mutex as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Introduce a separate op implementation for get_hext_stream() for IPC4.
This op will also be used to set the skip_during_fe_trigger flag for the
BE DAI pipeline. With this change, we can remove the flag setting in
sof_ipc4_dai_config() which will further simplify support for
DMIC/SSP/Soundwire in the LunarLake platform.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515112022.30297-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Instead of open coding the sending of sink format of the copier with
LARGE_CONFIG_SET message, use the proper function to do so.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230512105642.23437-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The nocodec mode served two purposes so far
a) generate a test driver for DMIC/SSP without any codec connected
b) make sure the use of snd_hdac_ libraries was contained
b) is no longer an option for LunarLake, the HDaudio DMA is used for
DMIC/SSP and the HDA_LINK option needs to be enabled.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we will have to use HDAudio DMA-based DAIs even
for SSP/DMIC/SoundWire. That's completely different to the
HDA_AUDIO_CODEC, the DAI ops deal with DMA configuration and that can
happen in the absence of any HDAudio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
hda_dai_hw_params, hda_dai_trigger(), hda_dai_hw_free are currently
only used for HDaudio codec support, but will be reused for
SSP/DMIC/SoundWire in the LunarLake/ACE2.x case. To avoid 'defined but
not used' errors or added complexity in Kconfig, mark all these
functions as __maybe_used.
When SSP/DMIC/SoundWire are added, some of these changes may be
reverted. For now this avoids compilation warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Before we change the Kconfig support, move code around. No
functionality change with this commit in isolation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The probe workqueue is only needed if we have a Display Audio codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
For LunarLake support, we need to enable HDA_LINK but we also want the
ability to remove HDaudio codec support, e.g. for 'nocodec'
tests. This requires a small change in the bus initialization without
any codec-specific callbacks provided.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The number of DAIs was based on a Kconfig option and the declaration
on another. Fix before changing the dependencies.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The existing code relies on conversions from cpu_dai to the sdev
structure pointer based on the cpu_dai component. This works fine for
HDaudio but will not work for SoundWire DAIs which are registered by a
different component. That's a problem preventing reuse of the HDaudio
DMA stream allocation for SoundWire DAIs starting with the LunarLake
platform.
This patch introduces a set of helpers to perform the conversion, and
an indirect way of retrieving the sdev pointer based on the
swidget->comp intermediate pointer.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The code has been cleaned-up multiple times, but while adding the new
abstractions for DMIC/SSP/SoundWire it appears that we don't really
need a specific sequence for .prepare, and we can reuse what
.hw_params already does.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Rander Wang <rander.wang@intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512181702.117483-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current selection logic assumes that input and output formats always
come in pairs in topology. Handle this special case by checking if all
input formats are the same. And for the case where there are multiple
supported input audio formats, modify the selection logic to pick the
audio formats based on the reference params which is either the FE
hw_params or the pipeline params based on the type of module.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to check if all formats are identical.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Modify the output format selection when there are multiple output
formats available to choose the one that matches the reference params.
The reference params depend on the type of module. In the case of
processing modules, the reference params are based on the selected input
audio format. This would be the case when a processing module does not
perform any format conversion during processing.
The only special case is the copier module. The copier module is capable
of format conversion but it is only used in the case when the output
is fixed to a single format. In the case of a module copier, when there are
multiple formats, the reference params is based on the selected input
params and the output format must match that of the selected input
format. In the case of host copier, the reference params should be
based on the input audio format for playback and the FE hw_params for
capture. In the case DAI copier, the reference params should be based on
the input audio format for capture and the FE hw_params for playback
when there is no format conversion in the pipeline from the host to the
DAI.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a new helper function sof_ipc4_get_valid_bits() to get the valid
bits in the PCM params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The current topologies have input/output formats in pairs and even
though there are multiple output formats, they are all the same. Handle
this case as if there were only one format in topology. Also, add a check
for the number of output formats and reports errors where applicable.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Rename it to sof_ipc4_init_input_audio_fmt() as it only does input
format selection now.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
In preparation for changing the logic for input/output format selection,
move the call to sof_ipc4_init_output_audio_fmt() into the individual
widget prepare ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a helper function to select the output format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
When there is only one input/output format specified in topology, there
is no need to search for a matching format, simply pick the available
one. This is in preparation to modify and split the selection logic for
the input and output audio formats.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515103336.16132-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We should use RT711_JD2_100K for on board rt711
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
These tables are used for 'nocodec' and SoundWire mockups+RVP tests.
The LNL RVP has a single rt711-sdca SoundWire codec.
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Currently, set_codec_init_func always start with link->adr_d[0] because
we assumed all adr_d on the same link are the same devices. The
assumption is no longer valid when different devices on the same sdw link
are supported.
Fixes: c8db7b5012 ("ASoC: Intel: sof_sdw: support different devices on the same sdw link")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
The description and board layout is changed and different
from previous ones for CometLake and Tigerlake.
The new codec layout for MTL is:
SDW0: RT711 Headphone
SDW1: RT714 DMIC
SDW2: RT1316 Speaker
SDW3: RT1316 Speaker
The previous codec layout for CML and TGL is:
SDW0: RT711 Headphone
SDW1: RT1316 Speaker
SDW2: RT1316 Speaker
SDW3: RT714 DMIC
Signed-off-by: Chao Song <chao.song@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
We should use RT711_JD2_100K for on board rt711.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Boards were using this in older kernels before adl and rpl ids were
split. Add this back to maintain support.
Signed-off-by: Terry Cheong <htcheong@chromium.org
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Update the driver to use the new ASoC core control notify helper.
This also fixes a bug where the control would not be found if the
CODEC was given a name prefix.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512122838.243002-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
Add a function to allow ASoC drivers to easily notify an ALSA control
change. This function will automatically add any component naming
prefix into the control name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230512122838.243002-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
The memory allocated for the tuples array assumes that there's 1
instance of all tokens already. So for those tokens that have multiple
instances in topology, we need to exclude the initial instance that has
already been accounted for.
Fixes: 4fdef47a44 ("ASoC: SOF: ipc4-topology: Add new tokens for input/output pin format count")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Link: https://lore.kernel.org/r/20230515085200.17094-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Kuninori Morimoto