Back in commit a4b2b01523 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit beecec9017
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec9017 ("drm/i915/execlists: Preemption!")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 4a118ecbe9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
4.15 merge window fixes, round 2:
randconfig fix from Arnd, plus the vblank WARN_ON fix from Ville.
* tag 'drm-misc-next-fixes-2017-11-08' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
This lock is used during register accessing in SRIOV guest.
The register accessing could happen both in irq enabled and
irq disabled cases. Always use irq-safe lock.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ ring submission is used for register accessing on SRIOV
VF that could happen both in irq enabled and irq disabled cases.
Inversion lock could happen on adev->ring_lru_list_lock, while
this operation is useless and just adds overhead in this use
case.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After commit ea09729c93 ("drm/amdgpu: rework page directory filling
v2") then it becomes a lot harder to verify that "r" is initialized. My
static checker complains and so I've reviewed the code. It does look
like it might be buggy... Anyway, it doesn't hurt to set "r" to zero
at the start.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We shifted some code around in commit 9cca0b8e5d ("drm/amdgpu: move
amdgpu_cs_sysvm_access_required into find_mapping") and now my static
checker complains that "r" might not be initialized at the end of the
function. I've reviewed the code, and that seems possible, but it's
also possible I may have missed something.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
dc_stream has long been renamed to dc_stream_state, so this
forward declaration hasn't been used at all.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's no longer used. In fact, there is no more dc_stream object.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have to reject unknown flags for uAPI considerations, and also
because the curent implementation limits their i915 storage space
to two bits.
v2: (Chris Wilson)
* Fix fail in ABI check.
* Added unknown flags and BUILD_BUG_ON.
v3:
* Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: cf6e7bac63 ("drm/i915: Add support for drm syncobjs")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit ebcaa1ff8b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Function vega10_apply_state_adjust_rules() only initializes
stable_pstate_sclk_dpm_percentage when
data->registry_data.stable_pstate_sclk_dpm_percentage is not between 1
and 100. The variable is then used to compute stable_pstate_sclk, which
therefore uses an uninitialized value.
Fix this by initializing stable_pstate_sclk_dpm_percentage to
data->registry_data.stable_pstate_sclk_dpm_percentage.
This issue has been found while building the kernel with clang. The
compiler reported a -Wsometimes-uninitialized warning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-and-Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smartch:
amdgpu_dm_commit_planes() error: double unlock 'spin_lock:&crtc->dev->event_lock'
amdgpu_dm_commit_planes() error: double unlock 'irqsave:flags'
The error path doesn't return so we only need a single unlock.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From smatch:
error: we previously assumed X could be null
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More "warn: inconsistent indenting" fixes from smatch.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes all the current smatch:
warn: inconsistent indenting
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smatch reported:
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.c:351:71: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce80_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.c:361:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce110_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper_dce112.c:415:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper2_dce112.c:415:73: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table2'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:148:34: warning: non-ANSI function declaration of function 'dc_create_gamma'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:178:50: warning: non-ANSI function declaration of function 'dc_create_transfer_func'
This fixes them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We assign "v_init = asic_blank_start;" a few lines earlier so there is
no need to do it again inside the if statements. Also "v_init" is
unsigned so it can't be less than zero.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
backlight_device_register() never returns NULL, it returns error
pointers on error so the check here is wrong.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis tools get annoyed that we don't indent this if
statement. Actually, the if statement isn't required because kfree()
can handle NULL pointers just fine. The DCE110STRENC_FROM_STRENC()
macro is a wrapper around container_of() but it's basically a no-op or a
cast. Anyway, it's not really appropriate here so it should be removed
as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for 4.15 merge window:
Just the cherry-picked vc4 fix plus a GFP_NOFAIL annotation (there's
apparently some new options in-flight to change/audit
too-small-to-fail kmalloc semantics or something like that).
* tag 'drm-misc-next-fixes-2017-11-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix wrong printk format in vc4_bo_stats_debugfs()
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
Since commit 632c6e4ede ("drm/vblank: Fix flip event vblank count")
even drivers that don't implement accurate vblank timestamps will end
up using drm_crtc_accurate_vblank_count(). That leads to a WARN every
time drm_crtc_arm_vblank_event() gets called. The could be as often
as every frame for each active crtc.
Considering drm_crtc_accurate_vblank_count() is never any worse than
the drm_vblank_count() we used previously, let's just skip the WARN
unless DRM_UT_VBL is enabled. That way people won't be bothered by
this unless they're debugging vblank code. And let's also change it
to WARN_ONCE() so that even when you're debugging vblank code you
won't get drowned by constant WARNs.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Szyprowski, Marek" <m.szyprowski@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Fixes: 632c6e4ede ("drm/vblank: Fix flip event vblank count")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023152540.15364-1-ville.syrjala@linux.intel.com
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Build-testing on randconfig kernels revealed a dependency in the
newly added lvds sub-driver:
drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_bind':
drivers/gpu/drm/rockchip/rockchip_lvds.c:380:24: error: 'struct drm_bridge' has no member named 'of_node'
remote = lvds->bridge->of_node;
We could work around that in the code, adding a Kconfig dependency
seems easier.
Fixes: 34cc0aa254 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106135852.1355487-1-arnd@arndb.de
Replace the PCI-specific flag PCI_DEV_FLAGS_NEEDS_RESUME with the
PM core's DPM_FLAG_NEVER_SKIP one everywhere and drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
some more amd/ttm fixes.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Downgrade pr_err to pr_debug for memory allocation failures
drm/ttm: Always and only destroy bo->ttm_resv in ttm_bo_release_list
drm/amd/amdgpu: Enabling ACP clock in hw_init (v2)
drm/amdgpu/virt: don't dereference undefined 'module' struct
Memory allocation failure should generally be handled gracefully by
callers. In particular, with transparent hugepage support, attempts
to allocate huge pages can fail under memory pressure, but the callers
fall back to allocating individual pages instead. In that case, there
would be spurious
[TTM] Unable to get page %u
error messages in dmesg.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a use-after-free due to a race condition in
ttm_bo_cleanup_refs_and_unlock, which allows one task to reserve a BO
and destroy its ttm_resv while another task is waiting for it to signal
in reservation_object_wait_timeout_rcu.
v2:
* Always initialize bo->ttm_resv in ttm_bo_init_reserved
(Christian König)
Fixes: 0d2bd2ae04 "drm/ttm: fix memory leak while individualizing BOs"
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> # v1
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling of ACP in hw_init does away with requirement of order
of probe on designware_i2s and acp dma driver. designware_i2s
reads i2s registers and this use to fail if acp dma driver was not probed
prior to it.
BUG=🅱️62103837
TEST=modprobe snd-soc-acp-pcm
modprobe snd-soc-acp-rt5645-mach
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: acprt5650 [acprt5650], device 0: RT5645_AIF1 rt5645-aif1-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
v2: use proper device in dev_err to fix warnings (Alex)
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-on: https://chromium-review.googlesource.com/670207
Reviewed-by: Jason Clinton <jclinton@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/676628
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEFWWmW3ewYy4RJOWc05gHnSar7m8FAlntvmAACgkQ05gHnSar
7m+W6g//bA7dZdhGfX01Ad/BvRR0gCays9LWyH5DZX5o34kEX5JgPZjesv+k2wmR
ecpD9s29qXnnkDeQUU/oO0fd/K1/6i2/EyJuIHpe3j1zASRzMqUwZGz05ot2iyYG
uS7l92P+QwCdKYWbKEn8gRzVwbmr3HZ4Hg5HVK81jQodObM9Gccp/Yk1olOm9WvN
h/+uvBfKlDjBnHw0IrFvFq+woUIdJ1bzAQ4g+/QRdPWlE9rDa0qvGMvvar90tPcA
FHGB71gaTZdAVtlF4XfQ1xOn5SmGJhc6NihdB00yR3H0/UVUClD9zwx4kLwYHD7P
+fkKPFFhuDqzWLQonJW57ijBgFp1ygLnHg59ttENAQuwiZj9prOIdkduSvHEOWva
g2DjeZ1csM79MfsvTOeV4MzY38q5NFBOixK6EsPurkyyFWE34L2gCKN5TBeNYsUc
yuSZAmh92JcDZV8P2SlNHx09qjjmG48FrDr7fkWG/2pFBXbIpHiltF63q20HHfBe
D3h7QgCipdGXJ/mk7Z8tpWrkn+ALddyShtQqAiTEHl7BGpdNFHECWl93LWFdqKfC
rLolhJui936qJhiA6+fZqFEUtvgb7HHJPTQE5EOgu/15/H+DylPE5jFdHvH/P07v
yqi6N6SLVTTxvudqv75GyKh53i9bzSrWHldCAacWmDtUGkEyAvM=
=fQeu
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
This time really the last i915 batch for v4.15:
- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)
* tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171023
drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
drm/i915: Let's use more enum intel_dpll_id pll_id.
drm/i915: Use existing DSI backlight ports info
drm/i915: Parse DSI backlight/cabc ports.
drm/i915: Skip waking the device to service pwrite
drm/i915/crt: split compute_config hook by platforms
drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
drm/i915: Unify error handling for missing DDI buf trans tables
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
drm/i915: Kill off the BXT buf_trans default_index
drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly
drm/i915: Integrate BXT into intel_ddi_dp_voltage_max()
drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers()
drm/i915: Pass the encoder type explicitly to skl_set_iboost()
drm/i915: Extract intel_ddi_get_buf_trans_hdmi()
drm/i915: Relocate intel_ddi_get_buf_trans_*() functions
drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
...
vc4->purgeable.size and vc4->purgeable.purged_size are size_t fields
and should be printed with a %zd specifier.
Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101095731.14878-1-boris.brezillon@free-electrons.com
(cherry picked from commit 50f365cde4)
Signed-off-by: Eric Anholt <eric@anholt.net>
-----BEGIN PGP SIGNATURE-----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=s45z
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
- one nouveau regression fix
- some amdgpu fixes for stable to fix hangs on some harvested Polaris
GPUs
- a set of KASAN and regression fixes for i915, their CI system seems
to be working pretty well now.
* tag 'drm-fixes-for-v4.14-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: allow harvesting check for Polaris VCE
drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting
drm/i915: Check incoming alignment for unfenced buffers (on i915gm)
drm/nouveau/kms/nv50: use the correct state for base channel notifier setup
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr)
drm/i915: Hold rcu_read_lock when iterating over the radixtree (objects)
drm/i915/edp: read edp display control registers unconditionally
drm/i915: Do not rely on wm preservation for ILK watermarks
drm/i915: Cancel the modeset retry work during modeset cleanup
Accessing the THIS_MODULE directly is only possible when modules
are enabled, otherwise we get a build failure:
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange':
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module'
Further, THIS_MODULE is NULL when the driver is built-in, so the
code would likely cause a NULL pointer dereference.
This adds an #ifdef check to avoid the compile-time error, plus
a NULL pointer check before dereferencing THIS_MODULE. It might
be better to find a way to avoid using the module version
altogether.
Fixes: 2dc8f81e4f ("drm/amdgpu: SR-IOV data exchange between PF&VF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-By: Xiangliang Yu <Xiangliang.Yu@amd.com>
nouveau next fixes.
Fixes arm32 build.
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/bios/timing: mark expected switch fall-throughs
drm/nouveau/devinit/nv04: mark expected switch fall-throughs
drm/nouveau/bios: make const arrays hwsq_signature and edid_sig static
drm/nouveau/core/memory: fix missing mutex unlock
drm/nouveau/mmu: swap out round for ALIGN
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1260018
Addresses-Coverity-ID: 1260019
Addresses-Coverity-ID: 1260022
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 143119
Addresses-Coverity-ID: 143120
Addresses-Coverity-ID: 143121
Addresses-Coverity-ID: 143122
Addresses-Coverity-ID: 143123
Addresses-Coverity-ID: 143124
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Don't populate arrays hwsq_signature and edid_sig on the stack but
instead make them static. Makes the object code smaller by over 190
bytes:
Before:
text data bss dec hex filename
35676 3312 64 39052 988c nouveau_bios.o
After:
text data bss dec hex filename
35319 3472 64 38855 97c7 nouveau_bios.o
(gcc version 7.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: etnaviv@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
- Usermode Events
The current events code implemented some data structures (waitqueue, fifo)
that were already implemented in the kernel. The patches below addresses
this issue by replacing them with the standard kernel implementation.
In addition, they simplify allocation of events IDs and memory for the events.
The patches also increase the maximum number of events while maintaining
compatibility with the older userspace library.
- Remove radeon support
Because Kaveri is fully supported in amdgpu and because current and future
versions of userspace libraries will only support amdgpu, we removed radeon
support from kfd. Current users can move to amdgpu while using the same
userspace libraries.
- Various bug fixes and cleanups
* tag 'drm-amdkfd-next-2017-11-02' of git://people.freedesktop.org/~gabbayo/linux: (26 commits)
drm/amdkfd: Minor cleanups
drm/amdkfd: Update queue_count before mapping queues
drm/amdkfd: Cleanup DQM ASIC-specific ops
drm/amdkfd: Register/Deregister process on qpd resolution
drm/amdkfd: Fix debug unregister procedure on process termination
drm/amdkfd: Avoid calling amd_iommu_unbind_pasid() when suspending
drm/amdkfd: Disable CP/SDMA ring/doorbell in MQD
drm/amdkfd: Clean up the data structure in kfd_process
drm/radeon: deprecate and remove KFD interface
drm/amdkfd: use a high priority workqueue for IH work
drm/amdkfd: wait only for IH work on IH exit
drm/amdkfd: increase IH num entries to 8192
drm/amdkfd: use standard kernel kfifo for IH
drm/amdkfd: increase limit of signal events to 4096 per process
drm/amdkfd: Make event limit dependent on user mode mapping size
drm/amdkfd: Use IH context ID for signal lookup
drm/amdkfd: Simplify event ID and signal slot management
drm/amdkfd: Simplify events page allocator
drm/amdkfd: Use wait_queue_t to implement event waiting
drm/amdkfd: remove redundant kfd_event_waiter.input_index
...
Some amdgpu/ttm fixes.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: wrong control mode cause the fan spins faster unnecessarily
drm/amd/powerplay: fix memory leak of hardcoded pptable
drm/amdgpu:add fw-vram-usage for atomfirmware
drm/radeon: fix atombios on big endian
drm/ttm:fix memory leak due to individualize
drm/amdgpu: fix error handling in amdgpu_bo_do_create
drm/ttm: once more fix ttm_buffer_object_transfer
drm/amd/powerplay: change ASIC temperature reading on Vega10
gcc warns about an ambiguous integer calculation:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function 'calculate_bandwidth':
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:534:5: error: this decimal constant is unsigned only in ISO C90 [-Werror]
data->lb_line_pitch = bw_ceil2(bw_mul(bw_div(bw_frc_to_fixed(2401171875, 100000000), bw_int_to_fixed(3)), bw_ceil2(data->source_width_in_lb, bw_int_to_fixed(8))), bw_int_to_fixed(48));
^~~~
Marking the constant as explicitly unsigned makes it work fine everywhere
without warnings.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name conflicts with another macro of the same name on the ARM ixp4xx
platform, leading to build errors.
Neither of the users actually should use a name that generic, but the
other one was here first and the dc driver doesn't actually use it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It seems impossible to build this driver without setting either
CONFIG_DEBUG_KERNEL or CONFIG_DEBUG_DRIVER:
drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h: In function 'set_reg_field_value_ex':
drivers/gpu/drm/amd/amdgpu/../display/dc/dm_services.h:132:2: error: implicit declaration of function 'ASSERT'; did you mean 'IS_ERR'? [-Werror=implicit-function-declaration]
This moves the ASSERT() macro and related helpers outside of
the #ifdef to get it to build again.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that the registers exist, assign them to the resource_straps struct.
v2: Fix indentation
v3: Fix trailing whitespace and checkpatch warnings.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=103404
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need them for initializing audio properly.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
We need to avoid calling reset after detection because the next
commit adds freesync properties on the atomic_state which are set
during detection. Calling reset after this clears them.
The easiest way to accomplish this right now is to call ->reset on
the connector right after creation but before detection. To stay
consistent call ->reset on every other object as well after creation.
v2: Provide better reason for this change in commit msg.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for multiple labels as kfree will always do a NULL check
before freeing the memory.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While setting cursor position in case of mpo,
input_pixel_processor is not available for underlay,
hence add check of the same to avoid null pointer
access issue.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
crtc is dereferenced from within drm_atomic_get_new_crtc_state, so
check for NULL before initializing new_crtc_state.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Also don't print for ERESTARTSYS or EAGAIN
v3: Best practice is to only ignore ERESTARTSYS
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get rid of the constant we copied over before and just directly use the
constants from the file.
Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just two small patches for stable to fix the driver failing to load on polaris
cards with harvested VCE or UVD blocks.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: allow harvesting check for Polaris VCE
drm/amdgpu: return -ENOENT from uvd 6.0 early init for harvesting
Fixes init failures on Polaris cards with harvested
VCE blocks.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fixes init failures on polaris cards with harvested UVD.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
VMAs are about to not take references on the VMM they belong to, which
means more care is required when handling delayed unmapping.
Queuing it on the client workqueue ensures all pending VMA unmaps will
have completed before the VMM is destroyed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is already handled in the top-level gem_new() ioctl in another manner,
but this will be removed in a future commit.
Ideally we'd not need to check up-front at all, and let the VMM code handle
error checking, but there are paths in the current BO management code where
this isn't possible due to map() not always being called during BO creation,
and map() calls not being allowed to fail during buffer migration.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If the VMA is being deleted, we don't need to explicity unmap first
anymore. The MMU code will automatically merge the operations into
a single page tree walk.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These are the new priviledged interfaces to the VMM backends, and expose
some functionality that wasn't previously available.
It's now possible to allocate a chunk of address-space (even all of it),
without causing page tables to be allocated up-front, and then map into
it at arbitrary locations. This is the basic primitive used to support
features such as sparse mapping, or to allow userspace control over its
own address-space, or HMM (where the GPU driver isn't in control of the
address-space layout).
Rather than being tied to a subtle combination of memory object and VMA
properties, arguments that control map flags (ro, kind, etc) are passed
explicitly at map time.
The compatibility hacks to implement the old frontend on top of the new
driver backends have been replaced with something similar to implement
the old frontend's interfaces on top of the new frontend.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB/2MiB big page sizes (128KiB not supported by HW with new PT layout).
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
- Sparse PDEs/PTEs.
- Additional blocklinear kinds.
- 49-bit address-space.
GP100 supports an entirely new 5-level page table layout that provides
an expanded 49-bit address-space. It also supports the layout present
on previous generations, which we've been making do with until now.
This commit implements support for the new layout, and enables it by
default.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- 64KiB big page size.
- System-memory PTs.
- LPTE "invalid" state.
- (Tegra) Use of video memory aperture.
Adds support for marking LPTEs invalid, resulting in the corresponding
SPTEs being ignored, which is supposed to speed up TLB invalidates.
On The Tegra side, this will switch to using the video memory aperture
for all mappings. The HW will still target non-coherent system memory,
but this aperture needs to be selected in order to support compression.
Tegra's instmem backend somewhat cheated to get this effect previously.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the common code to support a rework of the VMM backends.
It adds support for more than 2 levels of page table nesting, which
is required to be able to support GP100's MMU layout.
Sparse mappings (that don't cause MMU faults when accessed) are now
supported, where the backend provides it.
Dual-PT handling had to become more sophisticated to support sparse,
but this also allows us to support an optimisation the MMU provides
on GK104 and newer.
Certain operations can now be combined into a single page tree walk
to avoid some overhead, but also enables optimsations like skipping
PTE unmap writes when the PT will be destroyed anyway.
The old backend has been hacked up to forward requests onto the new
backend, if present, so that it's possible to bisect between issues
in the backend changes vs the upcoming frontend changes.
Until the new frontend has been merged, new backends will leak BAR2
page tables on module unload. This is expected, and it's not worth
the effort of hacking around this as it doesn't effect runtime.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
To avoid wasting compression tags when using 64KiB pages, we need to
enable this so we can select between upper/lower comptagline in PTEs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
If NV_PFB_MMU_CTRL_USE_FULL_COMP_TAG_LINE is TRUE, then the last bit of
NV_MMU_PTE_COMPTAGLINE is re-purposed to select the upper/lower half of
a compression tag when using 64KiB big pages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We previously required each VMM user to allocate their own page directory
and fill in the instance block themselves.
It makes more sense to handle this in a common location.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for:
- Selection of old/new-style page table layout (GP100MmuLayout=0/1).
- System-memory PDs.
New layout disabled by default for the moment, as we don't have a
backend that can handle it yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is the first chunk of the new VMM code that provides the structures
needed to describe a GPU virtual address-space layout, as well as common
interfaces to handle VMM creation, and connecting instances to a VMM.
The constructor now allocates the PD itself, rather than having the user
handle that manually. This won't/can't be used until after all backends
have been ported to these interfaces, so a little bit of memory will be
wasted on Fermi and newer for a couple of commits in the series.
Compatibility has been hacked into the old code to allow each GPU backend
to be ported individually.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP100 "big" (which is a funny name, when it supports "even bigger") page
tables are small enough that we want to be able to suballocate them from
a larger block of memory.
This builds on the previous page table cache interfaces so that the VMM
code doesn't need to know the difference.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Builds up and maintains a small cache of each page table size in order
to reduce the frequency of expensive allocations, particularly in the
pathological case where an address range ping-pongs between allocated
and free.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Removes the need to expose internals outside of MMU, and GP100 is both
different, and a lot harder to deal with.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will cause a subtle behaviour change on GPUs that are in mixed-memory
configurations in that VRAM in the degraded section of VRAM will no longer
be used for TTM buffer objects.
That section of VRAM is not meant to be used for displayable/compressed
surfaces, and we have no reliable way with the current interfaces to be
able to make that decision properly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Another transition step to allow finer-grained patches transitioning to
new MMU backends.
Old backends will continue operate as before (accessing nvkm_mem::tag),
and new backends will get a reference to the tags allocated here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming MMU changes use nvkm_memory as its basic representation of memory,
so we need to be able to allocate VRAM like this.
The code is basically identical to the current chipset-specific allocators,
minus support for compression tags (which will be handled elsewhere anyway).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adds support for 64-bit writes, and optimised filling of buffers with
fixed 32/64-bit values.
These will all be used by the upcoming MMU changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We need to be able to prevent memory from being freed while it's still
mapped in a GPU's address-space.
Will be used by upcoming MMU changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Needed by VMM code to determine whether an allocation is compatible with
a given page size (ie. you can't map 4KiB system memory pages into 64KiB
GPU pages).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Map flags (access, kind, etc) are currently defined in either the VMA,
or the memory object, which turns out to not be ideal for things like
suballocated buffers, etc.
These will become per-map flags instead, so we need to support passing
these arguments in nvkm_memory_map().
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_memory is going to be used by the upcoming mmu rework for the basic
representation of a memory allocation, as such, this commit adds support
for comptag allocation to nvkm_memory.
This is very simple for now, in that it requires comptags for the entire
memory allocation even if only certain ranges are compressed.
Support for tracking ranges will be added at a later date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Chris Wilson