Add reporting if the PSU is running in single or multi rail mode via
ocpmode debugfs entry. Also update the documentation and driver comments
accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YvS9PZKr0xqFqJny@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading virtual temperature sensors for the D5 Next, Octo,
Quadro and Farbwerk 360.
Virtual temperature sensors are written to the device by the user, pulling
from an arbitrary value source. Writing to them is not yet reverse
engineered, so the only way to set them for now is to use the official
software.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220817121441.112198-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver utilises a WMI interface found in AMD 500 series ASUS boards,
to read EC registers. But it turned out that ASUS abandoned the
interface, as it disappeared from Intel 600 series boards. Additionally,
the WMI interface was incredibly slow. Therefore this driver was deprecated
in favor of the asus_ec_sensors driver, which supports more boards, more
sensors, and is faster.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In gsc_hwmon_get_devtree_pdata(), we should call of_node_get() before
the of_find_compatible_node() which will automatically call
of_node_put() for the 'from' argument.
Fixes: 3bce5377ef ("hwmon: Add Gateworks System Controller support")
Signed-off-by: Liang He <windhl@126.com>
Co-developed-by: Mengda Chen <chenmengda2009@163.com>
Signed-off-by: Mengda Chen <chenmengda2009@163.com>
Link: https://lore.kernel.org/r/20220916154708.3084515-1-chenmengda2009@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The offsets for setting speeds of fans connected to Quadro are off by one.
Set them to their correct values.
The offsets as shown point to registers for setting the fan control mode,
which will be explored in future patches, but slipped in here. When
setting fan speeds, the resulting values were overlapping, which made the
fans still run in my initial testing.
Fixes: cdbe34da01 ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220914114327.6941-1-savicaleksa83@gmail.com
Cc: stable@vger.kenrel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
-----BEGIN PGP SIGNATURE-----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=FJba
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused scripts/gcc-ld script
- Add zstd support to scripts/extract-ikconfig
- Check 'make headers' for UML
- Fix scripts/mksysmap to ignore local symbols
* tag 'kbuild-fixes-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
mksysmap: Fix the mismatch of 'L0' symbols in System.map
kbuild: disable header exports for UML in a straightforward way
scripts/extract-ikconfig: add zstd compression support
scripts: remove obsolete gcc-ld script
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support.
- Remove bogus TIF_SME flag management if memory allocation fails in the
ptrace code.
- Fix the resume path when configured for 52-bit virtual addressing.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmMcmCUQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJEPB/9hhMNrX0yAc64otI99DRBuuZjlGWm5tLVj
A5dByt0bvca6XIE/5nZpduYcSGBORL4Ss29mbYteWlaU89TlLEHaedOpDTX0xj5g
61H8UiK0YDX9w/7hbPZw7Uxdvw30LJSxszWZ4Ucst9CYTq+mMbbhgf8h7/BDmBD+
OBpkOlouW4fSw15/UlbgBu6UTAVkbWNcWxzwzOVAdqFYzQ75eMnmOEkEZ8b/YBAA
wZ+0kFmpjGkWymZKlgTxLfQ3eVdKwlrFzBliDtbFoFNuWyyDQ2e1qDQKFZvST4ul
NMVlF19K9NKGVlxl2++rafbg5BQ+Y+0RJ2Hujf72W6sPaThJUDM2
=7sa1
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three small arm64 fixes, all related to optional architecture
extensions: BTI, SME and 52-bit virtual addressing:
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support
- Remove bogus TIF_SME flag management if memory allocation fails in
the ptrace code
- Fix the resume path when configured for 52-bit virtual addressing"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: fix resume for 52-bit enabled builds
arm64/ptrace: Don't clear calling process' TIF_SME on OOM
arm64/bti: Disable in kernel BTI when cross section thunks are broken
Including:
- Intel VT-d fixes from Lu Baolu
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
-----BEGIN PGP SIGNATURE-----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=+h6p
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes from Lu Baolu:
- Boot kdump kernels with VT-d scalable mode on
- Calculate the right page table levels
- Fix two recursive locking issues
- Fix a lockdep splat issue
- AMD IOMMU fixes:
- Fix for completion-wait command to use full 64 bits of data
- Fix PASID related issue where GPU sound devices failed to
initialize
- Fix for Virtio-IOMMU to report correct caching behavior, needed for
use with VFIO
* tag 'iommu-fixes-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix false ownership failure on AMD systems with PASID activated
iommu/vt-d: Fix possible recursive locking in intel_iommu_init()
iommu/virtio: Fix interaction with VFIO
iommu/vt-d: Fix lockdep splat due to klist iteration in atomic context
iommu/vt-d: Fix recursive lock issue in iommu_flush_dev_iotlb()
iommu/vt-d: Correctly calculate sagaw value of IOMMU
iommu/vt-d: Fix kdump kernels boot failure with scalable mode
iommu/amd: use full 64-bit value in build_completion_wait()
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
-----BEGIN PGP SIGNATURE-----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=djqb
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacf ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af0 ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline.
- Fix lowcore protection setup for offline CPU restart.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmMca+IACgkQjYWKoQLX
FBjE4Af+N/s30gWrJT1qY5ACxNyVH+UUbND+J/1Avg/PHMS1fLY/YN48clsPDimD
WqnmYWqMCSxRIg29qY6Inj+7ZMI8lrRwVO46JU+4a9kujKzppjsWxVrotaIYS+5n
EdBHPqdchxAhymAD9BkbffeuelFe/LKRY6R/JywbXMPbzNtx/KTO6wHNmPj3ekqK
04jPtgcVl0bziwvAVGhCxPqrHPUKxkW0EliyDWPvSYdTuroR6m8qKzKzaG2EpXwk
7eOJqIoZ88UVZYHPux+JSlaFMQzZS4a3kMHXzpc0X5DnHmyfYx0why2LFQKWX4fG
mZ59CIaZOV084t8zm98TiPs78sdHsg==
=JuWY
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline
- Fix lowcore protection setup for offline CPU restart
* tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/smp: enforce lowcore protection on CPU restart
s390/boot: fix absolute zero lowcore corruption on boot
- Fix severe regression in asus-ec-sensors driver which resulted
in EC driver failures.
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
-----BEGIN PGP SIGNATURE-----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=4wSZ
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone
(Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=n7sX
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone (Christoph
Hellwig)
* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: mark dma_supported static
swiotlb: fix a typo
swiotlb: avoid potential left shift overflow
dma-debug: improve search for partial syncs
Revert "swiotlb: panic if nslabs is too small"
__cpu_setup() was changed to take the actual number of VA bits in x0,
however the resume path was not updated at the same time.
Load `vabits_actual` in the resume path, to ensure that the correct
number of VA bits is used.
This fixes booting v6.0-rc kernels on my Juno.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 0aaa68532e ("arm64: mm: fix booting with 52-bit address space")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220909124311.38489-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal. Of the remaining four patches, only the fix
use-after-free is substantial.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYxt9aSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXVqAQCh9Tne
QHW5206CIOTIkNKJKNNKItLo26YaAEV3utb3xwEAzdDWsf1hA6GeppAhB7REIWh/
86uJqOBsGB6h3kMrgnk=
=yDR4
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal.
Of the remaining four patches, only the fix use-after-free is
substantial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix use-after-free warning
scsi: core: Fix a use-after-free
scsi: core: Revert "Make sure that targets outlive devices"
scsi: core: Revert "Make sure that hosts outlive targets"
scsi: core: Revert "Simplify LLD module reference counting"
scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
scsi: lpfc: Add missing destroy_workqueue() in error path
scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.
$ cat System.map | grep L0
9000000000221540 t L0
The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxuERw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylPqwCgjU6xlN2y/80HH+66k+yyzlxocE8AoLPgnGrA
dJZIGWFXExzO26tvMT52
=zGHA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
-----BEGIN PGP SIGNATURE-----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=3RZd
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
-----BEGIN PGP SIGNATURE-----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=8R3K
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Removed function that became unused after last week's merge (Jiapeng)
- Two small fixes for kbuf recycling (Pavel)
- Include address copy for zc send for POLLFIRST (Pavel)
- Fix for short IO handling in the normal read/write path (Pavel)
* tag 'io_uring-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
io_uring/rw: fix short rw error handling
io_uring/net: copy addr for zc on POLL_FIRST
io_uring: recycle kbuf recycle on tw requeue
io_uring/kbuf: fix not advancing READV kbuf ring
io_uring/notif: Remove the unused function io_notif_complete()
Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect capability
reporting to userspace, improper error handling for MW corners, touching
an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed
a timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type in
siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a crash on
error unwind.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYxtj4QAKCRCFwuHvBreF
YQNdAQDOAoXv3PCZikmyu4zmjzVdeUUXEig5RU3MgFdCimo99gEA8t+2/pHmnSTB
vn7cxuKMpJydAmLVFJPZxaOEuaBdegQ=
=/eYF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmMbYcsACgkQDHTzWXnE
hr4AhA/+I1CLSWE0WV7uGPH0JRgQVWuKCWTncQOeDZBCbQhtCh5d+ErYrNIUSBra
6cVjyAa+V0Nqt64xMM/GmLNOja62KUFIH6eVvI0VSVJ10UJ3+8DUSzlNIHmF25k3
HxWStf/TctmyHUe3mLKpTAaWtIFJ0t3dTPBNSbcc8OUbSOVN10/CxjBKm98iaIp1
VpcjRiyqIHaKXGUL5zkiOKW0fE4TTmQ8ZAtjEKECmF/eE4aLYyzWymIvQDayd4GB
5M0FzVBAM1d8YZmcD5XDhuZhPdmerJ//3NL1be9njGmK6ARokukd9k629TBwujlA
43C5da23Na8G2pfKjp0VqshDIzm1EkA8B08KoTJZFYPkweuQA+UrTUjU8JZvIKex
CuiNcbMoI6ez0dopezkDfyJ5Bhxs+bGMtnXvR8lMzL2GnkAN3pc4Q9mWB5nNwsAs
RbB2Wjqhx0d+HFOrBWX64q6VKgq/r3hH82V5TQSlHMkvUnXRPMIvseHwhQQKDD1r
nX6T/4ULIlbV87Y+eXL/mCTv76mZAHMyEQk8lrl2IlpjJMMoIWrF+XTi+FUjZojC
+XQoo57PyXa5FSb7JLQxGn8WqnMQQiUvaXtVd4HBDi0sLDEqUTxTCuKb0NiaJtIO
/Z3Dy2sV3oCXWNcJWCmviwwqNKcb1/zc/CIWOE+UQgZnBy6aDo0=
=Sypj
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"From a train in the Irish countryside, regular drm fixes for 6.0-rc5.
This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one
ttm and one edid fix. Nothing too major going on. Hopefully a quiet
week next week for LPC.
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP"
* tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm:
drm/panfrost: devfreq: set opp to the recommended one to configure regulator
drm/ttm: cleanup the resource of ghost objects after locking them
drm/amdgpu: prevent toc firmware memory leak
drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE
drm/amdkfd: print address in hex format rather than decimal
drm/amd/display: fix memory leak when using debugfs_lookup()
drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7
drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header
drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages
drm/i915: Implement WaEdpLinkRateDataReload
drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC
drm/i915/bios: Copy the whole MIPI sequence block
drm/ttm: update bulk move object of ghost BO
drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
This KUnit fixes update for Linux 6.0-rc5 consists of 2 fixes to test
build and a fix to incorrect taint reason reporting.
-----BEGIN PGP SIGNATURE-----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=xA12
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to test build and a fix for incorrect taint reason reporting"
* tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Add new "test" taint to kernel-chktaint
kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves
kunit: fix assert_type for comparison macros
* A pair of device tree fixes for the Polarfire SOC.
* A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1.
-----BEGIN PGP SIGNATURE-----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=86+k
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
- Fix crashes on bare metal due to the new plkps driver trying to probe and call the
hypervisor on non-pseries machines.
Thanks to: Nathan Chancellor, Dan Horák.
-----BEGIN PGP SIGNATURE-----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=cP4v
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crashes on bare metal due to the new plkps driver trying to probe
and call the hypervisor on non-pseries machines.
Thanks to Nathan Chancellor and Dan Horák.
* tag 'powerpc-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix plpks crash on non-pseries
Commit c461731836 ("MIPS: Add NUMA support for Loongson-3") has increased
.bss size of the Octeon kernel from 16k to 16M. Providing the conditions
for SPARSEMEM_EXTREME avoids the waste of memory.
Thomas has tested the loogsoon64 kernel, where .bss is being reduced by
this patch from 16.5M to 515k.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We have a couple of problems, first reports of unexpected link breakage
for reads when cqe->res indicates that the IO was done in full. The
reason here is partial IO with retries.
TL;DR; we compare the result in __io_complete_rw_common() against
req->cqe.res, but req->cqe.res doesn't store the full length but rather
the length left to be done. So, when we pass the full corrected result
via kiocb_done() -> __io_complete_rw_common(), it fails.
The second problem is that we don't try to correct res in
io_complete_rw(), which, for instance, might be a problem for O_DIRECT
but when a prefix of data was cached in the page cache. We also
definitely don't want to pass a corrected result into io_rw_done().
The fix here is to leave __io_complete_rw_common() alone, always pass
not corrected result into it and fix it up as the last step just before
actually finishing the I/O.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://github.com/axboe/liburing/issues/643
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're missing TIMED_OUT and RESV. Particularly the former is handy
for debugging, let's get them added.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmMaPukACgkQxWXV+ddt
WDsWKw/+IcpMsb08sjudn4dtFQ3HSA1E+dOYDzXwUJTS7ZpZhLRniLe1XQwHxe4D
7DUQA+e1RKGq4+TiznoLhaG/YCCcrLPZL/1aWhwO0M5Wj6BCIxSUa00BJNpxyBMw
kWb9vQltc5w5zJXHeIr7m2ByzT+YIl0v1lf2GQrJVieHhGiKslfkJHLoJt49oJ0L
9ka183VR/OCi/3uxUw6NMAjfv+0OGEsFZX/CF8Vo64IKg0I0Q248H4enZt43aDHA
dQDapAyAr4f6RLDs6ULS2GSzKfZIKMLHlvSeg1BSPyUt/NZFVlC0VwVX0NmwP62a
5NECYdimlQOGSlaahNEQpLIiyNYboi3Mq7m63BofWduDQanpnM1FByln9JVEizlm
VuUs3+O0CMp81HecSk3VbSe3ukO2fqAdQjM5cdpRx30TYu7WRiYNE3aHchgLmXLP
0zw9JV6ePg04Mstx+/3lo8D/X/7fMAT3NrqYmuImoekFWbdJfsiUtgdXNOglT9dt
6lb1/0jBEbdiXnQ/jT1OreGwSdGZqkEKF4OE26kPRxURyTDESzglNVyhXmshIANC
qnNuUFGea5d7LbyozYyfdcsQS7rEqLVKmUWrOb/3O/K1947/DegYodnhRwjCUSS7
iUaetkYUWxHa7U9303KneCUAyLEf1S8NXRPIObL6YIw7D09wato=
=WD7B
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes to zoned mode and one regression fix for chunk limit:
- Zoned mode fixes:
- fix how wait/wake up is done when finishing zone
- fix zone append limit in emulated mode
- fix mount on devices with conventional zones
- fix regression, user settable data chunk limit got accidentally
lowered and causes allocation problems on some profiles (raid0,
raid1)"
* tag 'for-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the max chunk size and stripe length calculation
btrfs: zoned: fix mounting with conventional zones
btrfs: zoned: set pseudo max append zone limit in zone emulation mode
btrfs: zoned: fix API misuse of zone finish waiting
we received lots of small fixes for various drivers at this time,
hopefully it will be the last big bump before 6.0 release.
The significant changes are regression fixes for (yet again) HD-audio
memory allocations and USB-audio PCM parameter handling, while there
are many small ASoC device-specific fixes as well as a few
out-of-bounds and race issues spotted by fuzzers.
-----BEGIN PGP SIGNATURE-----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=LEyu
-----END PGP SIGNATURE-----
Merge tag 'sound-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes for various drivers at this time, hopefully it
will be the last big bump before 6.0 release.
The significant changes are regression fixes for (yet again) HD-audio
memory allocations and USB-audio PCM parameter handling, while there
are many small ASoC device-specific fixes as well as a few
out-of-bounds and race issues spotted by fuzzers"
* tag 'sound-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: usb-audio: Clear fixed clock rate at closing EP
ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc()
ALSA: hda: Once again fix regression of page allocations with IOMMU
ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()
ALSA: hda/tegra: Align BDL entry to 4KB boundary
ALSA: hda/sigmatel: Fix unused variable warning for beep power change
ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC
ALSA: hda/sigmatel: Keep power up while beep is enabled
ALSA: aloop: Fix random zeros in capture data when using jiffies timer
ALSA: usb-audio: Split endpoint setups for hw_params and prepare
ALSA: usb-audio: Register card again for iface over delayed_register option
ALSA: usb-audio: Inform the delayed registration more properly
ASoC: fsl_aud2htx: Add error handler for pm_runtime_enable
ASoC: fsl_aud2htx: register platform component before registering cpu dai
ASoC: SOF: ipc4-topology: fix alh_group_ida max value
ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversion
ASoC: SOF: Kconfig: Make IPC_MESSAGE_INJECTOR depend on SND_SOC_SOF
ASoC: SOF: Kconfig: Make IPC_FLOOD_TEST depend on SND_SOC_SOF
ASoC: fsl_mqs: Fix supported clock DAI format
ASoC: nau8540: Implement hw constraint for rates
...
- Fix per-thread mmaps for multi-threaded targets, noticed with 'perf top --pid' with
multithreaded targets.
- Fix synthesis failure warnings in 'perf record'.
- Fix L2 Topdown metrics disappearance for raw events in 'perf stat'.
- Fix out of bound access in some CPU masks.
- Fix segfault if there is no CPU PMU table and a metric is sought, noticed when
building with NO_JEVENTS=1.
- Skip dummy event attr check in 'perf script' fixing nonsensical warning about
UREGS attribute not set, as 'dummy' events have no samples.
- Fix 'iregs' field handling with dummy events on hybrid systems in 'perf script'.
- Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'.
- Don't install data files with x permissions.
- Fix types for print format in dlfilter-show-cycles.
- Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'.
- Remove redundant word 'contention' in 'perf lock' help message.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYxqBaAAKCRCyPKLppCJ+
J6euAP0Rmztl5DUU7gCI939JHuVuC6ry68FgMPtpAKlD7QHgFQD7BwrhfVkvvLCH
wWNf69a47ZJwriZ2pLOhfYDQWk7SMQU=
=NiL3
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix per-thread mmaps for multi-threaded targets, noticed with
'perf top --pid' with multithreaded targets
- Fix synthesis failure warnings in 'perf record'
- Fix L2 Topdown metrics disappearance for raw events in 'perf stat'
- Fix out of bound access in some CPU masks
- Fix segfault if there is no CPU PMU table and a metric is sought,
noticed when building with NO_JEVENTS=1
- Skip dummy event attr check in 'perf script' fixing nonsensical
warning about UREGS attribute not set, as 'dummy' events have no
samples
- Fix 'iregs' field handling with dummy events on hybrid systems in
'perf script'
- Prevent potential memory leak in c2c_he_zalloc() in 'perf c2c'
- Don't install data files with x permissions
- Fix types for print format in dlfilter-show-cycles
- Switch deprecated openssl MD5_* functions to new EVP API in 'genelf'
- Remove redundant word 'contention' in 'perf lock' help message
* tag 'perf-tools-fixes-for-v6.0-2022-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf record: Fix synthesis failure warnings
perf tools: Don't install data files with x permissions
perf script: Fix Cannot print 'iregs' field for hybrid systems
perf lock: Remove redundant word 'contention' in help message
perf dlfilter dlfilter-show-cycles: Fix types for print format
libperf evlist: Fix per-thread mmaps for multi-threaded targets
perf c2c: Prevent potential memory leak in c2c_he_zalloc()
perf genelf: Switch deprecated openssl MD5_* functions to new EVP API
tools/perf: Fix out of bound access to cpu mask array
perf affinity: Fix out of bound access to "sched_cpus" mask
perf stat: Fix L2 Topdown metrics disappear for raw events
perf script: Skip dummy event attr check
perf metric: Return early if no CPU PMU table exists
- Do not stop trace events in modules if TAINT_TEST is set
- Do not clobber mount options when tracefs is mounted a second time
- Prevent crash of kprobes in gate area
- Add static annotation to some non global functions
- Add some entries into the MAINTAINERS file
- Fix check of event_mutex held when accessing trigger list
- Add some __init/__exit annotations
- Fix reporting of what called hardirq_{enable,disable}_ip function
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYxpcmRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsxpAQCJn2syotCcVN15NQc/1+bt3wceVqRK
nOZXm1o5YnfNfQEAzngl+YFJ6YhBT68Uwz0U9i2hsl4tbc/VXzFfsCxweAQ=
=sHO9
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not stop trace events in modules if TAINT_TEST is set
- Do not clobber mount options when tracefs is mounted a second time
- Prevent crash of kprobes in gate area
- Add static annotation to some non global functions
- Add some entries into the MAINTAINERS file
- Fix check of event_mutex held when accessing trigger list
- Add some __init/__exit annotations
- Fix reporting of what called hardirq_{enable,disable}_ip function
* tag 'trace-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracefs: Only clobber mode/uid/gid on remount if asked
kprobes: Prohibit probes in gate area
rv/reactor: add __init/__exit annotations to module init/exit funcs
tracing: Fix to check event_mutex is held while accessing trigger list
tracing: hold caller_addr to hardirq_{enable,disable}_ip
tracepoint: Allow trace events in modules with TAINT_TEST
MAINTAINERS: add scripts/tracing/ to TRACING
MAINTAINERS: Add Runtime Verification (RV) entry
rv/monitors: Make monitor's automata definition static
Just one fixup patch, reworking the softirq_on_own_stack logic for
preempt-rt kernels as discussed in
https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/
-----BEGIN PGP SIGNATURE-----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=0A1T
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull SOFTIRQ_ON_OWN_STACK rework from Arnd Bergmann:
"Just one fixup patch, reworking the softirq_on_own_stack logic for
preempt-rt kernels as discussed in
https://lore.kernel.org/all/CAHk-=wgZSD3W2y6yczad2Am=EfHYyiPzTn3CfXxrriJf9i5W5w@mail.gmail.com/"
* tag 'asm-generic-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.
Users may have explicitly configured their tracefs permissions; we
shouldn't overwrite those just because a second mount appeared.
Only clobber if the options were provided at mount time.
Note: the previous behavior was especially surprising in the presence of
automounted /sys/kernel/debug/tracing/.
Existing behavior:
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwx------
## Unexpected: the automount changed mode for other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwx------
New behavior (after this change):
## Pre-existing status: tracefs is 0755.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
## (Re)trigger the automount.
# umount /sys/kernel/debug/tracing
# stat -c '%A' /sys/kernel/debug/tracing/.
drwxr-xr-x
## Expected: the automount does not change other mount instances.
# stat -c '%A' /sys/kernel/tracing/
drwxr-xr-x
Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb7226790d44406@changeid
Cc: stable@vger.kernel.org
Fixes: 4282d60689 ("tracefs: Add new tracefs file system")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
SBI firmware should report total number of firmware and hardware counters
including unused ones or special ones. In this case the kernel doesn't need
to make any assumptions about gaps in reported counters, e.g. excluded timer
counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect
if SBI firmware behaves correctly. However it eliminates access beyond the
allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.
Fixes: e999143459 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
install(1), by default, installs with rwxr-xr-x permissions. Modify
perf's Makefile to pass '-m 644' when installing:
* Documentation/tips.txt
* examples/bpf/*
* perf-completion.sh
* perf_dlfilter.h header
* scripts/perl/Perf-Trace-Util/lib/Perf/Trace/*
* scripts/perl/*.pl
* tests/attr/*
* tests/attr.py
* tests/shell/lib/*.sh
* trace/strace/groups/*
All those are supposed to be non-executable. Either they are not scripts
at all, or they don't have shebang.
Signed-off-by: <jslaby@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908060426.9619-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.
This change is needed for all places that use pvt->v_num or vm_num
later on in the code.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Wilken Gottwalt