failure in reading pre-boot verion is not handled correctly,
upon failure we need to reset the device in order to be able
to reinstall the driver.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Several header files are repeatedly included in many files.
Move these files to habanalabs.h which is included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As in standard wait cs, we must release a signal fence once
a collective wait cs was dropped and not submitted.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are no internal queues if H/W queues are being used.
In this case we can skip the redundant traversal over the queues array,
looking for internal queues.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Slightly refactor the cs_do_release() function, to reduce nesting level
and to ease the handling of future CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Refactor the CS IOCTL handling by gathering common code into
sub-functions, in order to ease future additions of new CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW security is enabled there is no access to PLL registers,
need to read values from FW using a dedicated interface.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit refactors the MMU code to support PCI MMU page tables
residing on host and DCORE MMU residing on the device DRAM at the
same time.
This is needed for future devices as on GAUDI and GOYA we have
a single MMU where its page tables always reside on DRAM.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In cases of multi-tenants, administrators may want to prevent data
leakage between users running on the same device one after another.
To do that the driver can scrub the internal memory (both SRAM and
DRAM) after a user finish to use the memory.
Because in GAUDI the driver allows only one application to use the
device at a time, it can scrub the memory when user app close FD.
In future devices where we have MMU on the DRAM, we can scrub the DRAM
memory with a finer granularity (page granularity) when the user
allocates the memory.
This feature is not supported in Goya.
To allow users that want to debug their applications, we add a kernel
module parameter to load the driver with this feature disabled.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip relevant HW configurations once FW security is enabled
because these configurations are being performed by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for fetching security indication from FW.
This indication is needed in order to skip unnecessary
initializations done by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today driver is able to load a whole FW binary into a specific
location on ASIC. We add support for loading sections from the
same FW binary into different loactions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Although we get a valid cs type from the callee, in case new values
will be added in the future, it is best to check the expected values
in that function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In GAUDI we don't have an MMU towards the HBM device memory. Therefore,
the user access that memory directly through physical address (via the
different engines) without the need to go through the driver to
allocate/free memory on the HBM.
For system monitoring purposes, the driver will keep track of the HBM
usage. This can be done as long as the user accurately reports the
allocations and releases of HBM memory, through the existing MEMORY
IOCTL uapi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.
Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.
Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initialize the QMANs that are responsible to submit doorbells to the NIC
engines. Add support for stopping and disabling them, and reset them as
part of the hard-reset procedure of GAUDI. This will allow the user to
submit work to the NICs.
Add support for receiving events on QMAN errors from the firmware.
However, the nic_ports_mask is still initialized to 0. That means this code
won't initialize the QMANs just yet. That will be in a later patch.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Configure the security properties of the NIC IP. This is to prevent the
user process from doing something with the NIC that he shouldn't do. e.g.
crash the server, steal data, etc.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add new structures and messages that the driver use to interact with the
firmware to receive information and events (errors) about GAUDI's NIC.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add auto-generated header files that describe the NIC QMANs registers
used by the driver.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We already check if queue index is smaller than max queues a few lines
above this check so no need to check this again.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we are running without MMU enabled (debug mode), no need to
initialize the VM module in the driver.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver now loads the firmware in two stages. For debugging purposes
we need to support situations where only the first stage firmware is
loaded.
Therefore, use a bitmask to determine which F/W is loaded
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W can be loaded but device CPU queues disabled. In that case, HWMON
should be disabled. This is only relevant when debugging
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we will have multiple contexts/processes, we can't just
increment aggregated counters. We need to make them atomic as they can
be incremented by multiple processes
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is missing statement and missing "break;" in the ECC handling
code in gaudi.c
This will cause a wrong behavior upon certain ECC interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This interrupt cause is not relevant because of how the user use the
QMAN arbitration mechanism. We must mask it as the log explodes with it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We must relocate the coresight mmu configuration to the coresight
flow to make it work in case the first submission is to configure
the profiler.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.
There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:
drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
512 | rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,
Rather than adding one more cast, just fix the type and
remove all the other casts.
Fixes: 0db575350c ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
LDMA registers are configured with a fixed value.
We add new define set which gives the configuration
a proper meaning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device should be idle after a context is closed. If not, print a
notice.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During debugging of error we sometimes need to know whether the error
happened when a user context was open. Add debug prints when opening and
closing user contexts.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some engines use resources that belong to the kernel context (e.g. MMU
mappings). In case the halt-engines doesn't work properly due to H/W
restriction, we need to make sure the kernel context lives on until after
the hw_fini. The hw_fini resets the ASIC after that no engine is alive and
we can safely close the kernel context.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We don't try to allocate huge pages here so remove the huge word.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Our firmware use some scratchpad registers in the device for different
roles. Update the file to the latest version of the firmware code.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future F/W versions will have enhanced security measures and the driver
won't be able to do certain configurations that it always did and those
configurations will be done by the firmware.
We use the firmware's preboot version to determine whether security
measures are enabled or not. Because we need this very early in our code,
the read of the preboot version is moved to the earliest possible place,
right after the device's PCI initialization.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is a workaround for H/W bug H3-2116, where if there are more than 16
outstanding completions in the DMA transpose engine, there can be a
deadlock in the engine.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
farah kassabri