Commit Graph

457 Commits

Author SHA1 Message Date
Hugh Dickins 245132643e SHM_UNLOCK: fix Unevictable pages stranded after swap
Commit cc39c6a9bb ("mm: account skipped entries to avoid looping in
find_get_pages") correctly fixed an infinite loop; but left a problem
that find_get_pages() on shmem would return 0 (appearing to callers to
mean end of tree) when it meets a run of nr_pages swap entries.

The only uses of find_get_pages() on shmem are via pagevec_lookup(),
called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's
scan_mapping_unevictable_pages().  The first is already commented, and
not worth worrying about; but the second can leave pages on the
Unevictable list after an unusual sequence of swapping and locking.

Fix that by using shmem_find_get_pages_and_swap() (then ignoring the
swap) instead of pagevec_lookup().

But I don't want to contaminate vmscan.c with shmem internals, nor
shmem.c with LRU locking.  So move scan_mapping_unevictable_pages() into
shmem.c, renaming it shmem_unlock_mapping(); and rename
check_move_unevictable_page() to check_move_unevictable_pages(), looping
down an array of pages, oftentimes under the same lock.

Leave out the "rotate unevictable list" block: that's a leftover from
when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed
handling involved looking at pages at tail of LRU.

Was there significance to the sequence first ClearPageUnevictable, then
test page_evictable, then SetPageUnevictable here? I think not, we're
under LRU lock, and have no barriers between those.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:48 -08:00
Hugh Dickins 85046579bd SHM_UNLOCK: fix long unpreemptible section
scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages
evictable again once the shared memory is unlocked.  It does this with
pagevec_lookup()s across the whole object (which might occupy most of
memory), and takes 300ms to unlock 7GB here.  A cond_resched() every
PAGEVEC_SIZE pages would be good.

However, KOSAKI-san points out that this is called under shmem.c's
info->lock, and it's also under shm.c's shm_lock(), both spinlocks.
There is no strong reason for that: we need to take these pages off the
unevictable list soonish, but those locks are not required for it.

So move the call to scan_mapping_unevictable_pages() from shmem.c's
unlock handling up to shm.c's unlock handling.  Remove the recently
added barrier, not needed now we have spin_unlock() before the scan.

Use get_file(), with subsequent fput(), to make sure we have a reference
to mapping throughout scan_mapping_unevictable_pages(): that's something
that was previously guaranteed by the shm_lock().

Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK
time, and we lazily discover them to be Unevictable later, so it serves
no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since
pages still on pagevec are not marked Unevictable.

The original code avoided redundant rescans by checking VM_LOCKED flag
at its level: now avoid them by checking shp's SHM_LOCKED.

The original code called scan_mapping_unevictable_pages() on a locked
area at shm_destroy() time: perhaps we once had accounting cross-checks
which required that, but not now, so skip the overhead and just let
inode eviction deal with them.

Put check_move_unevictable_page() and scan_mapping_unevictable_pages()
under CONFIG_SHMEM (with stub for the TINY case when ramfs is used),
more as comment than to save space; comment them used for SHM_UNLOCK.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:38:48 -08:00
Hugh Dickins 3f79768f23 mm: rearrange putback_inactive_pages
There is sometimes confusion between the global putback_lru_pages() in
migrate.c and the static putback_lru_pages() in vmscan.c: rename the
latter putback_inactive_pages(): it helps shrink_inactive_list() rather as
move_active_pages_to_lru() helps shrink_active_list().

Remove unused scan_control arg from putback_inactive_pages() and from
update_isolated_counts().  Move clear_active_flags() inside
update_isolated_counts().  Move NR_ISOLATED accounting up into
shrink_inactive_list() itself, so the balance is clearer.

Do the spin_lock_irq() before calling putback_inactive_pages() and
spin_unlock_irq() after return from it, so that it better matches
update_isolated_counts() and move_active_pages_to_lru().

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:10 -08:00
Hugh Dickins f626012db0 mm: remove isolate_pages()
The isolate_pages() level in vmscan.c offers little but indirection: merge
it into isolate_lru_pages() as the compiler does, and use the names
nr_to_scan and nr_scanned in each case.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:10 -08:00
Hugh Dickins 4111304dab mm: enum lru_list lru
Mostly we use "enum lru_list lru": change those few "l"s to "lru"s.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:10 -08:00
Hugh Dickins 2bcf887963 mm: take pagevecs off reclaim stack
Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru()
by lists of pages_to_free: then apply Konstantin Khlebnikov's
free_hot_cold_page_list() to them instead of pagevec_release().

Which simplifies the flow (no need to drop and retake lock whenever
pagevec fills up) and reduces stale addresses in stack backtraces
(which often showed through the pagevecs); but more importantly,
removes another 120 bytes from the deepest stacks in page reclaim.
Although I've not recently seen an actual stack overflow here with
a vanilla kernel, move_active_pages_to_lru() has often featured in
deep backtraces.

However, free_hot_cold_page_list() does not handle compound pages
(nor need it: a Transparent HugePage would have been split by the
time it reaches the call in shrink_page_list()), but it is possible
for putback_lru_pages() or move_active_pages_to_lru() to be left
holding the last reference on a THP, so must exclude the unlikely
compound case before putting on pages_to_free.

Remove pagevec_strip(), its work now done in move_active_pages_to_lru().
The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c,
but that is never on the reclaim path, and cannot be replaced by a list.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:10 -08:00
Mel Gorman 0cee34fd72 mm: vmscan: check if reclaim should really abort even if compaction_ready() is true for one zone
If compaction can proceed for a given zone, shrink_zones() does not
reclaim any more pages from it.  After commit [e0c2327: vmscan: abort
reclaim/compaction if compaction can proceed], do_try_to_free_pages()
tries to finish as soon as possible once one zone can compact.

This was intended to prevent slabs being shrunk unnecessarily but there
are side-effects.  One is that a small zone that is ready for compaction
will abort reclaim even if the chances of successfully allocating a THP
from that zone is small.  It also means that reclaim can return too early
even though sc->nr_to_reclaim pages were not reclaimed.

This partially reverts the commit until it is proven that slabs are really
being shrunk unnecessarily but preserves the check to return 1 to avoid
OOM if reclaim was aborted prematurely.

[aarcange@redhat.com: This patch replaces a revert from Andrea]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Mel Gorman fe4b1b244b mm: vmscan: when reclaiming for compaction, ensure there are sufficient free pages available
In commit e0887c19 ("vmscan: limit direct reclaim for higher order
allocations"), Rik noted that reclaim was too aggressive when THP was
enabled.  In his initial patch he used the number of free pages to decide
if reclaim should abort for compaction.  My feedback was that reclaim and
compaction should be using the same logic when deciding if reclaim should
be aborted.

Unfortunately, this had the effect of reducing THP success rates when the
workload included something like streaming reads that continually
allocated pages.  The window during which compaction could run and return
a THP was too small.

This patch combines Rik's two patches together.  compaction_suitable() is
still used to decide if reclaim should be aborted to allow compaction is
used.  However, it will also ensure that there is a reasonable buffer of
free pages available.  This improves upon the THP allocation success rates
but bounds the number of pages that are freed for compaction.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel<riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Mel Gorman c824493528 mm: compaction: make isolate_lru_page() filter-aware again
Commit 39deaf85 ("mm: compaction: make isolate_lru_page() filter-aware")
noted that compaction does not migrate dirty or writeback pages and that
is was meaningless to pick the page and re-add it to the LRU list.  This
had to be partially reverted because some dirty pages can be migrated by
compaction without blocking.

This patch updates "mm: compaction: make isolate_lru_page" by skipping
over pages that migration has no possibility of migrating to minimise LRU
disruption.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel<riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Mel Gorman 7335084d44 mm: vmscan: do not OOM if aborting reclaim to start compaction
During direct reclaim it is possible that reclaim will be aborted so that
compaction can be attempted to satisfy a high-order allocation.  If this
decision is made before any pages are reclaimed, it is possible that 0 is
returned to the page allocator potentially triggering an OOM.  This has
not been observed but it is a possibility so this patch addresses it.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:09 -08:00
Andrea Arcangeli 5013473152 mm: vmscan: check if we isolated a compound page during lumpy scan
Properly take into account if we isolated a compound page during the lumpy
scan in reclaim and skip over the tail pages when encountered.  This
corrects the values given to the tracepoint for number of lumpy pages
isolated and will avoid breaking the loop early if compound pages smaller
than the requested allocation size are requested.

[mgorman@suse.de: Updated changelog]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:08 -08:00
Tao Ma ea4d349ffa vmscan/trace: Add 'file' info to trace_mm_vmscan_lru_isolate()
In trace_mm_vmscan_lru_isolate(), we don't output 'file' information to
the trace event and it is a bit inconvenient for the user to get the
real information(like pasted below).  mm_vmscan_lru_isolate:
isolate_mode=2 order=0 nr_requested=32 nr_scanned=32 nr_taken=32
contig_taken=0 contig_dirty=0 contig_failed=0

'active' can be obtained by analyzing mode(Thanks go to Minchan and
Mel), So this patch adds 'file' to the trace event and it now looks
like: mm_vmscan_lru_isolate: isolate_mode=2 order=0 nr_requested=32
nr_scanned=32 nr_taken=32 contig_taken=0 contig_dirty=0 contig_failed=0
file=0

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:08 -08:00
Johannes Weiner 72835c86ca mm: unify remaining mem_cont, mem, etc. variable names to memcg
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:06 -08:00
Johannes Weiner 925b7673cc mm: make per-memcg LRU lists exclusive
Now that all code that operated on global per-zone LRU lists is
converted to operate on per-memory cgroup LRU lists instead, there is no
reason to keep the double-LRU scheme around any longer.

The pc->lru member is removed and page->lru is linked directly to the
per-memory cgroup LRU lists, which removes two pointers from a
descriptor that exists for every page frame in the system.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:05 -08:00
Johannes Weiner 6290df5458 mm: collect LRU list heads into struct lruvec
Having a unified structure with a LRU list set for both global zones and
per-memcg zones allows to keep that code simple which deals with LRU
lists and does not care about the container itself.

Once the per-memcg LRU lists directly link struct pages, the isolation
function and all other list manipulations are shared between the memcg
case and the global LRU case.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:05 -08:00
Johannes Weiner b95a2f2d48 mm: vmscan: convert global reclaim to per-memcg LRU lists
The global per-zone LRU lists are about to go away on memcg-enabled
kernels, global reclaim must be able to find its pages on the per-memcg
LRU lists.

Since the LRU pages of a zone are distributed over all existing memory
cgroups, a scan target for a zone is complete when all memory cgroups
are scanned for their proportional share of a zone's memory.

The forced scanning of small scan targets from kswapd is limited to
zones marked unreclaimable, otherwise kswapd can quickly overreclaim by
force-scanning the LRU lists of multiple memory cgroups.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:05 -08:00
Johannes Weiner 5660048cca mm: move memcg hierarchy reclaim to generic reclaim code
Memory cgroup limit reclaim and traditional global pressure reclaim will
soon share the same code to reclaim from a hierarchical tree of memory
cgroups.

In preparation of this, move the two right next to each other in
shrink_zone().

The mem_cgroup_hierarchical_reclaim() polymath is split into a soft
limit reclaim function, which still does hierarchy walking on its own,
and a limit (shrinking) reclaim function, which relies on generic
reclaim code to walk the hierarchy.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:05 -08:00
Johannes Weiner f16015fbf2 mm: vmscan: distinguish between memcg triggering reclaim and memcg being scanned
Memory cgroup hierarchies are currently handled completely outside of
the traditional reclaim code, which is invoked with a single memory
cgroup as an argument for the whole call stack.

Subsequent patches will switch this code to do hierarchical reclaim, so
there needs to be a distinction between a) the memory cgroup that is
triggering reclaim due to hitting its limit and b) the memory cgroup
that is being scanned as a child of a).

This patch introduces a struct mem_cgroup_zone that contains the
combination of the memory cgroup and the zone being scanned, which is
then passed down the stack instead of the zone argument.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:04 -08:00
Johannes Weiner 89b5fae536 mm: vmscan: distinguish global reclaim from global LRU scanning
The traditional zone reclaim code is scanning the per-zone LRU lists
during direct reclaim and kswapd, and the per-zone per-memory cgroup LRU
lists when reclaiming on behalf of a memory cgroup limit.

Subsequent patches will convert the traditional reclaim code to reclaim
exclusively from the per-memory cgroup LRU lists.  As a result, using
the predicate for which LRU list is scanned will no longer be
appropriate to tell global reclaim from limit reclaim.

This patch adds a global_reclaim() predicate to tell direct/kswapd
reclaim from memory cgroup limit reclaim and substitutes it in all
places where currently scanning_global_lru() is used for that.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:04 -08:00
Hillf Danton 3770490ec8 mm: vmscan: fix typo in isolating lru pages
It is not the tag page but the cursor page that we should process, and it
looks a typo.

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:46 -08:00
Hugh Dickins 043bcbe5ec mm: test PageSwapBacked in lumpy reclaim
Lumpy reclaim does well to stop at a PageAnon when there's no swap, but
better is to stop at any PageSwapBacked, which includes shmem/tmpfs too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:46 -08:00
Minchan Kim 86cfd3a450 mm/vmscan.c: consider swap space when deciding whether to continue reclaim
It's pointless to continue reclaiming when we have no swap space and lots
of anon pages in the inactive list.

Without this patch, it is possible when swap is disabled to continue
trying to reclaim when there are only anonymous pages in the system even
though that will not make any progress.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:45 -08:00
KOSAKI Motohiro 25bd91bd27 vmscan: add task name to warn_scan_unevictable() messages
If we need to know a usecase, caller program name is critical important.
Show it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
David Rientjes <rientjes@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:43 -08:00
Konstantin Khlebnikov cc59850ef9 mm: add free_hot_cold_page_list() helper
This patch adds helper free_hot_cold_page_list() to free list of 0-order
pages.  It frees pages directly from list without temporary page-vector.
It also calls trace_mm_pagevec_free() to simulate pagevec_free()
behaviour.

bloat-o-meter:

add/remove: 1/1 grow/shrink: 1/3 up/down: 267/-295 (-28)
function                                     old     new   delta
free_hot_cold_page_list                        -     264    +264
get_page_from_freelist                      2129    2132      +3
__pagevec_free                               243     239      -4
split_free_page                              380     373      -7
release_pages                                606     510     -96
free_page_list                               188       -    -188

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:41 -08:00
Konstantin Khlebnikov c909e99364 vmscan: activate executable pages after first usage
Logic added in commit 8cab4754d2 ("vmscan: make mapped executable pages
the first class citizen") was noticeably weakened in commit
6457474624 ("vmscan: detect mapped file pages used only once").

Currently these pages can become "first class citizens" only after second
usage.  After this patch page_check_references() will activate they after
first usage, and executable code gets yet better chance to stay in memory.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:41 -08:00
Konstantin Khlebnikov 34dbc67a64 vmscan: promote shared file mapped pages
Commit 6457474624 ("vmscan: detect mapped file pages used only once")
greatly decreases lifetime of single-used mapped file pages.
Unfortunately it also decreases life time of all shared mapped file
pages.  Because after commit bf3f3bc5e7 ("mm: don't mark_page_accessed
in fault path") page-fault handler does not mark page active or even
referenced.

Thus page_check_references() activates file page only if it was used twice
while it stays in inactive list, meanwhile it activates anon pages after
first access.  Inactive list can be small enough, this way reclaimer can
accidentally throw away any widely used page if it wasn't used twice in
short period.

After this patch page_check_references() also activate file mapped page at
first inactive list scan if this page is already used multiple times via
several ptes.

I found this while trying to fix degragation in rhel6 (~2.6.32) from rhel5
(~2.6.18).  There a complete mess with >100 web/mail/spam/ftp containers,
they share all their files but there a lot of anonymous pages: ~500mb
shared file mapped memory and 15-20Gb non-shared anonymous memory.  In
this situation major-pagefaults are very costly, because all containers
share the same page.  In my load kernel created a disproportionate
pressure on the file memory, compared with the anonymous, they equaled
only if I raise swappiness up to 150 =)

These patches actually wasn't helped a lot in my problem, but I saw
noticable (10-20 times) reduce in count and average time of
major-pagefault in file-mapped areas.

Actually both patches are fixes for commit v2.6.33-5448-g6457474, because
it was aimed at one scenario (singly used pages), but it breaks the logic
in other scenarios (shared and/or executable pages)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:41 -08:00
Greg Kroah-Hartman ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Kay Sievers 10fbcf4c6c convert 'memory' sysdev_class to a regular subsystem
This moves the 'memory sysdev_class' over to a regular 'memory' subsystem
and converts the devices to regular devices. The sysdev drivers are
implemented as subsystem interfaces now.

After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21 14:48:43 -08:00
Konstantin Khlebnikov 83aeeada7c vmscan: use atomic-long for shrinker batching
Use atomic-long operations instead of looping around cmpxchg().

[akpm@linux-foundation.org: massage atomic.h inclusions]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-09 07:50:27 -08:00
Konstantin Khlebnikov 635697c663 vmscan: fix initial shrinker size handling
A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock.  For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0.  Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this.  So the next time around this shrinker can cause
really big pressure.  Let's skip such shrinkers instead.

Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-09 07:50:27 -08:00
Linus Torvalds 208bca0860 Merge branch 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Add a 'reason' to wb_writeback_work
  writeback: send work item to queue_io, move_expired_inodes
  writeback: trace event balance_dirty_pages
  writeback: trace event bdi_dirty_ratelimit
  writeback: fix ppc compile warnings on do_div(long long, unsigned long)
  writeback: per-bdi background threshold
  writeback: dirty position control - bdi reserve area
  writeback: control dirty pause time
  writeback: limit max dirty pause time
  writeback: IO-less balance_dirty_pages()
  writeback: per task dirty rate limit
  writeback: stabilize bdi->dirty_ratelimit
  writeback: dirty rate control
  writeback: add bg_threshold parameter to __bdi_update_bandwidth()
  writeback: dirty position control
  writeback: account per-bdi accumulated dirtied pages
2011-11-06 19:02:23 -08:00
Johannes Weiner 9b272977e3 memcg: skip scanning active lists based on individual size
Reclaim decides to skip scanning an active list when the corresponding
inactive list is above a certain size in comparison to leave the assumed
working set alone while there are still enough reclaim candidates around.

The memcg implementation of comparing those lists instead reports whether
the whole memcg is low on the requested type of inactive pages,
considering all nodes and zones.

This can lead to an oversized active list not being scanned because of the
state of the other lists in the memcg, as well as an active list being
scanned while its corresponding inactive list has enough pages.

Not only is this wrong, it's also a scalability hazard, because the global
memory state over all nodes and zones has to be gathered for each memcg
and zone scanned.

Make these calculations purely based on the size of the two LRU lists
that are actually affected by the outcome of the decision.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:00 -07:00
Mel Gorman e0c23279c9 vmscan: abort reclaim/compaction if compaction can proceed
If compaction can proceed, shrink_zones() stops doing any work but its
callers still call shrink_slab() which raises the priority and potentially
sleeps.  This is unnecessary and wasteful so this patch aborts direct
reclaim/compaction entirely if compaction can proceed.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:50 -07:00
Rik van Riel e0887c19b2 vmscan: limit direct reclaim for higher order allocations
When suffering from memory fragmentation due to unfreeable pages, THP page
faults will repeatedly try to compact memory.  Due to the unfreeable
pages, compaction fails.

Needless to say, at that point page reclaim also fails to create free
contiguous 2MB areas.  However, that doesn't stop the current code from
trying, over and over again, and freeing a minimum of 4MB (2UL <<
sc->order pages) at every single invocation.

This resulted in my 12GB system having 2-3GB free memory, a corresponding
amount of used swap and very sluggish response times.

This can be avoided by having the direct reclaim code not reclaim from
zones that already have plenty of free memory available for compaction.

If compaction still fails due to unmovable memory, doing additional
reclaim will only hurt the system, not help.

[jweiner@redhat.com: change comment to explain the order check]
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:50 -07:00
Minchan Kim 21ee9f398b vmscan: add barrier to prevent evictable page in unevictable list
When a race between putback_lru_page() and shmem_lock with lock=0 happens,
progrom execution order is as follows, but clear_bit in processor #1 could
be reordered right before spin_unlock of processor #1.  Then, the page
would be stranded on the unevictable list.

spin_lock
SetPageLRU
spin_unlock
                                clear_bit(AS_UNEVICTABLE)
                                spin_lock
                                if PageLRU()
                                        if !test_bit(AS_UNEVICTABLE)
                                        	move evictable list
smp_mb
if !test_bit(AS_UNEVICTABLE)
        move evictable list
                                spin_unlock

But, pagevec_lookup() in scan_mapping_unevictable_pages() has
rcu_read_[un]lock() so it could protect reordering before reaching
test_bit(AS_UNEVICTABLE) on processor #1 so this problem never happens.
But it's a unexpected side effect and we should solve this problem
properly.

This patch adds a barrier after mapping_clear_unevictable.

I didn't meet this problem but just found during review.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:50 -07:00
Johannes Weiner 264e56d824 mm: disable user interface to manually rescue unevictable pages
At one point, anonymous pages were supposed to go on the unevictable list
when no swap space was configured, and the idea was to manually rescue
those pages after adding swap and making them evictable again.  But
nowadays, swap-backed pages on the anon LRU list are not scanned without
available swap space anyway, so there is no point in moving them to a
separate list anymore.

The manual rescue could also be used in case pages were stranded on the
unevictable list due to race conditions.  But the code has been around for
a while now and newly discovered bugs should be properly reported and
dealt with instead of relying on such a manual fixup.

In addition to the lack of a usecase, the sysfs interface to rescue pages
from a specific NUMA node has been broken since its introduction, so it's
unlikely that anybody ever relied on that.

This patch removes the functionality behind the sysctl and the
node-interface and emits a one-time warning when somebody tries to access
either of them.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reported-by: Kautuk Consul <consul.kautuk@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:49 -07:00
Kautuk Consul 3f380998ae vmscan.c: fix invalid strict_strtoul() check in write_scan_unevictable_node()
write_scan_unevictable_node() checks the value req returned by
strict_strtoul() and returns 1 if req is 0.

However, when strict_strtoul() returns 0, it means successful conversion
of buf to unsigned long.

Due to this, the function was not proceeding to scan the zones for
unevictable pages even though we write a valid value to the
scan_unevictable_pages sys file.

Change this check slightly to check for invalid value in buf as well as 0
value stored in res after successful conversion via strict_strtoul.  In
both cases, we do not perform the scanning of this node's zones.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:49 -07:00
Alex,Shi f0dfcde099 kswapd: assign new_order and new_classzone_idx after wakeup in sleeping
There 2 places to read pgdat in kswapd.  One is return from a successful
balance, another is waked up from kswapd sleeping.  The new_order and
new_classzone_idx represent the balance input order and classzone_idx.

But current new_order and new_classzone_idx are not assigned after
kswapd_try_to_sleep(), that will cause a bug in the following scenario.

1: after a successful balance, kswapd goes to sleep, and new_order = 0;
   new_classzone_idx = __MAX_NR_ZONES - 1;

2: kswapd waked up with order = 3 and classzone_idx = ZONE_NORMAL

3: in the balance_pgdat() running, a new balance wakeup happened with
   order = 5, and classzone_idx = ZONE_NORMAL

4: the first wakeup(order = 3) finished successufly, return order = 3
   but, the new_order is still 0, so, this balancing will be treated as a
   failed balance.  And then the second tighter balancing will be missed.

So, to avoid the above problem, the new_order and new_classzone_idx need
to be assigned for later successful comparison.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:48 -07:00
Alex,Shi d2ebd0f6b8 kswapd: avoid unnecessary rebalance after an unsuccessful balancing
In commit 215ddd66 ("mm: vmscan: only read new_classzone_idx from pgdat
when reclaiming successfully") , Mel Gorman said kswapd is better to sleep
after a unsuccessful balancing if there is tighter reclaim request pending
in the balancing.  But in the following scenario, kswapd do something that
is not matched our expectation.  The patch fixes this issue.

1, Read pgdat request A (classzone_idx, order = 3)
2, balance_pgdat()
3, During pgdat, a new pgdat request B (classzone_idx, order = 5) is placed
4, balance_pgdat() returns but failed since returned order = 0
5, pgdat of request A assigned to balance_pgdat(), and do balancing again.
   While the expectation behavior of kswapd should try to sleep.

Signed-off-by: Alex Shi <alex.shi@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Pádraig Brady <P@draigBrady.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:48 -07:00
Shaohua Li 16fb951237 vmscan: count pages into balanced for zone with good watermark
It's possible a zone watermark is ok when entering the balance_pgdat()
loop, while the zone is within the requested classzone_idx.  Count pages
from this zone into `balanced'.  In this way, we can skip shrinking zones
too much for high order allocation.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:47 -07:00
Mel Gorman 49ea7eb65e mm: vmscan: immediately reclaim end-of-LRU dirty pages when writeback completes
When direct reclaim encounters a dirty page, it gets recycled around the
LRU for another cycle.  This patch marks the page PageReclaim similar to
deactivate_page() so that the page gets reclaimed almost immediately after
the page gets cleaned.  This is to avoid reclaiming clean pages that are
younger than a dirty page encountered at the end of the LRU that might
have been something like a use-once page.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:47 -07:00
Mel Gorman 92df3a723f mm: vmscan: throttle reclaim if encountering too many dirty pages under writeback
Workloads that are allocating frequently and writing files place a large
number of dirty pages on the LRU.  With use-once logic, it is possible for
them to reach the end of the LRU quickly requiring the reclaimer to scan
more to find clean pages.  Ordinarily, processes that are dirtying memory
will get throttled by dirty balancing but this is a global heuristic and
does not take into account that LRUs are maintained on a per-zone basis.
This can lead to a situation whereby reclaim is scanning heavily, skipping
over a large number of pages under writeback and recycling them around the
LRU consuming CPU.

This patch checks how many of the number of pages isolated from the LRU
were dirty and under writeback.  If a percentage of them under writeback,
the process will be throttled if a backing device or the zone is
congested.  Note that this applies whether it is anonymous or file-backed
pages that are under writeback meaning that swapping is potentially
throttled.  This is intentional due to the fact if the swap device is
congested, scanning more pages and dispatching more IO is not going to
help matters.

The percentage that must be in writeback depends on the priority.  At
default priority, all of them must be dirty.  At DEF_PRIORITY-1, 50% of
them must be, DEF_PRIORITY-2, 25% etc.  i.e.  as pressure increases the
greater the likelihood the process will get throttled to allow the flusher
threads to make some progress.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Mel Gorman f84f6e2b08 mm: vmscan: do not writeback filesystem pages in kswapd except in high priority
It is preferable that no dirty pages are dispatched for cleaning from the
page reclaim path.  At normal priorities, this patch prevents kswapd
writing pages.

However, page reclaim does have a requirement that pages be freed in a
particular zone.  If it is failing to make sufficient progress (reclaiming
< SWAP_CLUSTER_MAX at any priority priority), the priority is raised to
scan more pages.  A priority of DEF_PRIORITY - 3 is considered to be the
point where kswapd is getting into trouble reclaiming pages.  If this
priority is reached, kswapd will dispatch pages for writing.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Mel Gorman a18bba061c mm: vmscan: remove dead code related to lumpy reclaim waiting on pages under writeback
Lumpy reclaim worked with two passes - the first which queued pages for IO
and the second which waited on writeback.  As direct reclaim can no longer
write pages there is some dead code.  This patch removes it but direct
reclaim will continue to wait on pages under writeback while in
synchronous reclaim mode.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Mel Gorman ee72886d8e mm: vmscan: do not writeback filesystem pages in direct reclaim
Testing from the XFS folk revealed that there is still too much I/O from
the end of the LRU in kswapd.  Previously it was considered acceptable by
VM people for a small number of pages to be written back from reclaim with
testing generally showing about 0.3% of pages reclaimed were written back
(higher if memory was low).  That writing back a small number of pages is
ok has been heavily disputed for quite some time and Dave Chinner
explained it well;

	It doesn't have to be a very high number to be a problem. IO
	is orders of magnitude slower than the CPU time it takes to
	flush a page, so the cost of making a bad flush decision is
	very high. And single page writeback from the LRU is almost
	always a bad flush decision.

To complicate matters, filesystems respond very differently to requests
from reclaim according to Christoph Hellwig;

	xfs tries to write it back if the requester is kswapd
	ext4 ignores the request if it's a delayed allocation
	btrfs ignores the request

As a result, each filesystem has different performance characteristics
when under memory pressure and there are many pages being dirtied.  In
some cases, the request is ignored entirely so the VM cannot depend on the
IO being dispatched.

The objective of this series is to reduce writing of filesystem-backed
pages from reclaim, play nicely with writeback that is already in progress
and throttle reclaim appropriately when writeback pages are encountered.
The assumption is that the flushers will always write pages faster than if
reclaim issues the IO.

A secondary goal is to avoid the problem whereby direct reclaim splices
two potentially deep call stacks together.

There is a potential new problem as reclaim has less control over how long
before a page in a particularly zone or container is cleaned and direct
reclaimers depend on kswapd or flusher threads to do the necessary work.
However, as filesystems sometimes ignore direct reclaim requests already,
it is not expected to be a serious issue.

Patch 1 disables writeback of filesystem pages from direct reclaim
	entirely. Anonymous pages are still written.

Patch 2 removes dead code in lumpy reclaim as it is no longer able
	to synchronously write pages. This hurts lumpy reclaim but
	there is an expectation that compaction is used for hugepage
	allocations these days and lumpy reclaim's days are numbered.

Patches 3-4 add warnings to XFS and ext4 if called from
	direct reclaim. With patch 1, this "never happens" and is
	intended to catch regressions in this logic in the future.

Patch 5 disables writeback of filesystem pages from kswapd unless
	the priority is raised to the point where kswapd is considered
	to be in trouble.

Patch 6 throttles reclaimers if too many dirty pages are being
	encountered and the zones or backing devices are congested.

Patch 7 invalidates dirty pages found at the end of the LRU so they
	are reclaimed quickly after being written back rather than
	waiting for a reclaimer to find them

I consider this series to be orthogonal to the writeback work but it is
worth noting that the writeback work affects the viability of patch 8 in
particular.

I tested this on ext4 and xfs using fs_mark, a simple writeback test based
on dd and a micro benchmark that does a streaming write to a large mapping
(exercises use-once LRU logic) followed by streaming writes to a mix of
anonymous and file-backed mappings.  The command line for fs_mark when
botted with 512M looked something like

./fs_mark -d  /tmp/fsmark-2676  -D  100  -N  150  -n  150  -L  25  -t  1  -S0  -s  10485760

The number of files was adjusted depending on the amount of available
memory so that the files created was about 3xRAM.  For multiple threads,
the -d switch is specified multiple times.

The test machine is x86-64 with an older generation of AMD processor with
4 cores.  The underlying storage was 4 disks configured as RAID-0 as this
was the best configuration of storage I had available.  Swap is on a
separate disk.  Dirty ratio was tuned to 40% instead of the default of
20%.

Testing was run with and without monitors to both verify that the patches
were operating as expected and that any performance gain was real and not
due to interference from monitors.

Here is a summary of results based on testing XFS.

512M1P-xfs           Files/s  mean                 32.69 ( 0.00%)     34.44 ( 5.08%)
512M1P-xfs           Elapsed Time fsmark                    51.41     48.29
512M1P-xfs           Elapsed Time simple-wb                114.09    108.61
512M1P-xfs           Elapsed Time mmap-strm                113.46    109.34
512M1P-xfs           Kswapd efficiency fsmark                 62%       63%
512M1P-xfs           Kswapd efficiency simple-wb              56%       61%
512M1P-xfs           Kswapd efficiency mmap-strm              44%       42%
512M-xfs             Files/s  mean                 30.78 ( 0.00%)     35.94 (14.36%)
512M-xfs             Elapsed Time fsmark                    56.08     48.90
512M-xfs             Elapsed Time simple-wb                112.22     98.13
512M-xfs             Elapsed Time mmap-strm                219.15    196.67
512M-xfs             Kswapd efficiency fsmark                 54%       56%
512M-xfs             Kswapd efficiency simple-wb              54%       55%
512M-xfs             Kswapd efficiency mmap-strm              45%       44%
512M-4X-xfs          Files/s  mean                 30.31 ( 0.00%)     33.33 ( 9.06%)
512M-4X-xfs          Elapsed Time fsmark                    63.26     55.88
512M-4X-xfs          Elapsed Time simple-wb                100.90     90.25
512M-4X-xfs          Elapsed Time mmap-strm                261.73    255.38
512M-4X-xfs          Kswapd efficiency fsmark                 49%       50%
512M-4X-xfs          Kswapd efficiency simple-wb              54%       56%
512M-4X-xfs          Kswapd efficiency mmap-strm              37%       36%
512M-16X-xfs         Files/s  mean                 60.89 ( 0.00%)     65.22 ( 6.64%)
512M-16X-xfs         Elapsed Time fsmark                    67.47     58.25
512M-16X-xfs         Elapsed Time simple-wb                103.22     90.89
512M-16X-xfs         Elapsed Time mmap-strm                237.09    198.82
512M-16X-xfs         Kswapd efficiency fsmark                 45%       46%
512M-16X-xfs         Kswapd efficiency simple-wb              53%       55%
512M-16X-xfs         Kswapd efficiency mmap-strm              33%       33%

Up until 512-4X, the FSmark improvements were statistically significant.
For the 4X and 16X tests the results were within standard deviations but
just barely.  The time to completion for all tests is improved which is an
important result.  In general, kswapd efficiency is not affected by
skipping dirty pages.

1024M1P-xfs          Files/s  mean                 39.09 ( 0.00%)     41.15 ( 5.01%)
1024M1P-xfs          Elapsed Time fsmark                    84.14     80.41
1024M1P-xfs          Elapsed Time simple-wb                210.77    184.78
1024M1P-xfs          Elapsed Time mmap-strm                162.00    160.34
1024M1P-xfs          Kswapd efficiency fsmark                 69%       75%
1024M1P-xfs          Kswapd efficiency simple-wb              71%       77%
1024M1P-xfs          Kswapd efficiency mmap-strm              43%       44%
1024M-xfs            Files/s  mean                 35.45 ( 0.00%)     37.00 ( 4.19%)
1024M-xfs            Elapsed Time fsmark                    94.59     91.00
1024M-xfs            Elapsed Time simple-wb                229.84    195.08
1024M-xfs            Elapsed Time mmap-strm                405.38    440.29
1024M-xfs            Kswapd efficiency fsmark                 79%       71%
1024M-xfs            Kswapd efficiency simple-wb              74%       74%
1024M-xfs            Kswapd efficiency mmap-strm              39%       42%
1024M-4X-xfs         Files/s  mean                 32.63 ( 0.00%)     35.05 ( 6.90%)
1024M-4X-xfs         Elapsed Time fsmark                   103.33     97.74
1024M-4X-xfs         Elapsed Time simple-wb                204.48    178.57
1024M-4X-xfs         Elapsed Time mmap-strm                528.38    511.88
1024M-4X-xfs         Kswapd efficiency fsmark                 81%       70%
1024M-4X-xfs         Kswapd efficiency simple-wb              73%       72%
1024M-4X-xfs         Kswapd efficiency mmap-strm              39%       38%
1024M-16X-xfs        Files/s  mean                 42.65 ( 0.00%)     42.97 ( 0.74%)
1024M-16X-xfs        Elapsed Time fsmark                   103.11     99.11
1024M-16X-xfs        Elapsed Time simple-wb                200.83    178.24
1024M-16X-xfs        Elapsed Time mmap-strm                397.35    459.82
1024M-16X-xfs        Kswapd efficiency fsmark                 84%       69%
1024M-16X-xfs        Kswapd efficiency simple-wb              74%       73%
1024M-16X-xfs        Kswapd efficiency mmap-strm              39%       40%

All FSMark tests up to 16X had statistically significant improvements.
For the most part, tests are completing faster with the exception of the
streaming writes to a mixture of anonymous and file-backed mappings which
were slower in two cases

In the cases where the mmap-strm tests were slower, there was more
swapping due to dirty pages being skipped.  The number of additional pages
swapped is almost identical to the fewer number of pages written from
reclaim.  In other words, roughly the same number of pages were reclaimed
but swapping was slower.  As the test is a bit unrealistic and stresses
memory heavily, the small shift is acceptable.

4608M1P-xfs          Files/s  mean                 29.75 ( 0.00%)     30.96 ( 3.91%)
4608M1P-xfs          Elapsed Time fsmark                   512.01    492.15
4608M1P-xfs          Elapsed Time simple-wb                618.18    566.24
4608M1P-xfs          Elapsed Time mmap-strm                488.05    465.07
4608M1P-xfs          Kswapd efficiency fsmark                 93%       86%
4608M1P-xfs          Kswapd efficiency simple-wb              88%       84%
4608M1P-xfs          Kswapd efficiency mmap-strm              46%       45%
4608M-xfs            Files/s  mean                 27.60 ( 0.00%)     28.85 ( 4.33%)
4608M-xfs            Elapsed Time fsmark                   555.96    532.34
4608M-xfs            Elapsed Time simple-wb                659.72    571.85
4608M-xfs            Elapsed Time mmap-strm               1082.57   1146.38
4608M-xfs            Kswapd efficiency fsmark                 89%       91%
4608M-xfs            Kswapd efficiency simple-wb              88%       82%
4608M-xfs            Kswapd efficiency mmap-strm              48%       46%
4608M-4X-xfs         Files/s  mean                 26.00 ( 0.00%)     27.47 ( 5.35%)
4608M-4X-xfs         Elapsed Time fsmark                   592.91    564.00
4608M-4X-xfs         Elapsed Time simple-wb                616.65    575.07
4608M-4X-xfs         Elapsed Time mmap-strm               1773.02   1631.53
4608M-4X-xfs         Kswapd efficiency fsmark                 90%       94%
4608M-4X-xfs         Kswapd efficiency simple-wb              87%       82%
4608M-4X-xfs         Kswapd efficiency mmap-strm              43%       43%
4608M-16X-xfs        Files/s  mean                 26.07 ( 0.00%)     26.42 ( 1.32%)
4608M-16X-xfs        Elapsed Time fsmark                   602.69    585.78
4608M-16X-xfs        Elapsed Time simple-wb                606.60    573.81
4608M-16X-xfs        Elapsed Time mmap-strm               1549.75   1441.86
4608M-16X-xfs        Kswapd efficiency fsmark                 98%       98%
4608M-16X-xfs        Kswapd efficiency simple-wb              88%       82%
4608M-16X-xfs        Kswapd efficiency mmap-strm              44%       42%

Unlike the other tests, the fsmark results are not statistically
significant but the min and max times are both improved and for the most
part, tests completed faster.

There are other indications that this is an improvement as well.  For
example, in the vast majority of cases, there were fewer pages scanned by
direct reclaim implying in many cases that stalls due to direct reclaim
are reduced.  KSwapd is scanning more due to skipping dirty pages which is
unfortunate but the CPU usage is still acceptable

In an earlier set of tests, I used blktrace and in almost all cases
throughput throughout the entire test was higher.  However, I ended up
discarding those results as recording blktrace data was too heavy for my
liking.

On a laptop, I plugged in a USB stick and ran a similar tests of tests
using it as backing storage.  A desktop environment was running and for
the entire duration of the tests, firefox and gnome terminal were
launching and exiting to vaguely simulate a user.

1024M-xfs            Files/s  mean               0.41 ( 0.00%)        0.44 ( 6.82%)
1024M-xfs            Elapsed Time fsmark               2053.52   1641.03
1024M-xfs            Elapsed Time simple-wb            1229.53    768.05
1024M-xfs            Elapsed Time mmap-strm            4126.44   4597.03
1024M-xfs            Kswapd efficiency fsmark              84%       85%
1024M-xfs            Kswapd efficiency simple-wb           92%       81%
1024M-xfs            Kswapd efficiency mmap-strm           60%       51%
1024M-xfs            Avg wait ms fsmark                5404.53     4473.87
1024M-xfs            Avg wait ms simple-wb             2541.35     1453.54
1024M-xfs            Avg wait ms mmap-strm             3400.25     3852.53

The mmap-strm results were hurt because firefox launching had a tendency
to push the test out of memory.  On the postive side, firefox launched
marginally faster with the patches applied.  Time to completion for many
tests was faster but more importantly - the "Avg wait" time as measured by
iostat was far lower implying the system would be more responsive.  It was
also the case that "Avg wait ms" on the root filesystem was lower.  I
tested it manually and while the system felt slightly more responsive
while copying data to a USB stick, it was marginal enough that it could be
my imagination.

This patch: do not writeback filesystem pages in direct reclaim.

When kswapd is failing to keep zones above the min watermark, a process
will enter direct reclaim in the same manner kswapd does.  If a dirty page
is encountered during the scan, this page is written to backing storage
using mapping->writepage.

This causes two problems.  First, it can result in very deep call stacks,
particularly if the target storage or filesystem are complex.  Some
filesystems ignore write requests from direct reclaim as a result.  The
second is that a single-page flush is inefficient in terms of IO.  While
there is an expectation that the elevator will merge requests, this does
not always happen.  Quoting Christoph Hellwig;

	The elevator has a relatively small window it can operate on,
	and can never fix up a bad large scale writeback pattern.

This patch prevents direct reclaim writing back filesystem pages by
checking if current is kswapd.  Anonymous pages are still written to swap
as there is not the equivalent of a flusher thread for anonymous pages.
If the dirty pages cannot be written back, they are placed back on the LRU
lists.  There is now a direct dependency on dirty page balancing to
prevent too many pages in the system being dirtied which would prevent
reclaim making forward progress.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Johannes Weiner f11c0ca501 mm: vmscan: drop nr_force_scan[] from get_scan_count
The nr_force_scan[] tuple holds the effective scan numbers for anon and
file pages in case the situation called for a forced scan and the
regularly calculated scan numbers turned out zero.

However, the effective scan number can always be assumed to be
SWAP_CLUSTER_MAX right before the division into anon and file.  The
numerators and denominator are properly set up for all cases, be it force
scan for just file, just anon, or both, to do the right thing.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:46 -07:00
Shaohua Li 3da367c3e5 vmscan: add block plug for page reclaim
per-task block plug can reduce block queue lock contention and increase
request merge.  Currently page reclaim doesn't support it.  I originally
thought page reclaim doesn't need it, because kswapd thread count is
limited and file cache write is done at flusher mostly.

When I test a workload with heavy swap in a 4-node machine, each CPU is
doing direct page reclaim and swap.  This causes block queue lock
contention.  In my test, without below patch, the CPU utilization is about
2% ~ 7%.  With the patch, the CPU utilization is about 1% ~ 3%.  Disk
throughput isn't changed.  This should improve normal kswapd write and
file cache write too (increase request merge for example), but might not
be so obvious as I explain above.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
Minchan Kim f80c067361 mm: zone_reclaim: make isolate_lru_page() filter-aware
In __zone_reclaim case, we don't want to shrink mapped page.  Nonetheless,
we have isolated mapped page and re-add it into LRU's head.  It's
unnecessary CPU overhead and makes LRU churning.

Of course, when we isolate the page, the page might be mapped but when we
try to migrate the page, the page would be not mapped.  So it could be
migrated.  But race is rare and although it happens, it's no big deal.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00
Minchan Kim 39deaf8585 mm: compaction: make isolate_lru_page() filter-aware
In async mode, compaction doesn't migrate dirty or writeback pages.  So,
it's meaningless to pick the page and re-add it to lru list.

Of course, when we isolate the page in compaction, the page might be dirty
or writeback but when we try to migrate the page, the page would be not
dirty, writeback.  So it could be migrated.  But it's very unlikely as
isolate and migration cycle is much faster than writeout.

So, this patch helps cpu overhead and prevent unnecessary LRU churning.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00
Minchan Kim 4356f21d09 mm: change isolate mode from #define to bitwise type
Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
macro isn't recommended as it's type-unsafe and making debugging harder as
symbol cannot be passed throught to the debugger.

Quote from Johannes
" Hmm, it would probably be cleaner to fully convert the isolation mode
into independent flags.  INACTIVE, ACTIVE, BOTH is currently a
tri-state among flags, which is a bit ugly."

This patch moves isolate mode from swap.h to mmzone.h by memcontrol.h

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:44 -07:00