tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add vlans to the existing rx_filter_sync mechanics currently
used for managing mac filters.
Older versions of our firmware had no enforced limits on the
number of vlans that the LIF could request, but requesting large
numbers of vlans caused issues in FW memory management, so an
arbitrary limit was added in the FW. The FW now returns -ENOSPC
when it hits that limit, which the driver needs to handle.
Unfortunately, the FW doesn't advertise the vlan id limit,
as it does with mac filters, so the driver won't know the
limit until it bumps into it. We'll grab the current vlan id
count and use that as the limit from there on and thus prevent
getting any more -ENOSPC errors.
Just as is done for the mac filters, the device puts the device
into promiscuous mode when -ENOSPC is seen for vlan ids, and
the driver will track the vlans that aren't synced to the FW.
When vlans are removed, the driver will retry the un-synced
vlans. If all outstanding vlans are synced, the promiscuous
mode will be disabled.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The overflow flags really aren't useful and we don't need lif
struct elements to track them.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The routines that add and delete mac addresses from the
firmware really should be in the file with the rest of
the filter management. This simply moves the functions
with no logic changes.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bridging, and possibly other upper stack gizmos, adds the
lower device's netdev->dev_addr to its own uc list, and
then requests it be deleted when the upper bridge device is
removed. This delete request also happens with the bridging
vlan_filtering is enabled and then disabled.
Bonding has a similar behavior with the uc list, but since it
also uses set_mac to manage netdev->dev_addr, it doesn't have
the same the failure case.
Because we store our netdev->dev_addr in our uc list, we need
to ignore the delete request from dev_uc_sync so as to not
lose the address and all hope of communicating. Note that
ndo_set_mac_address is expressly changing netdev->dev_addr,
so no limitation is set there.
Fixes: 2a654540be ("ionic: Add Rx filter and rx_mode ndo support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the setting of the filter-sync-needed bit to the error
case in the filter add routine to be sure we're checking the
live filter status rather than a copy of the pre-sync status.
Fixes: 969f843946 ("ionic: sync the filters in the work task")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the lif parameter for use in an error message, and
to better match the style of most of the functions calls.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code a little by keeping the send_to_hw decision
inside of ionic_qcq_disable rather than in the callers. Also,
add ENXIO to the decision expression.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Widen the coverage of the queue_lock to be sure the lif init
and lif deinit actions are protected. This addresses a hang
seen when a Tx Timeout action was attempted at the same time
as a FW Reset was started.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move creation and deletion of lif mutex a level out to
lif creation and delete, rather than in init and deinit.
This assures that nothing will get hung if anything is waiting
on the mutex while the driver is clearing the lif while handling
the fw_down/fw_up cycle.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Deadlock seen in an instance where the hwstamp configuration
is changed while the driver is running:
[ 3988.736671] schedule_preempt_disabled+0xe/0x10
[ 3988.736676] __mutex_lock.isra.5+0x276/0x4e0
[ 3988.736683] __mutex_lock_slowpath+0x13/0x20
[ 3988.736687] ? __mutex_lock_slowpath+0x13/0x20
[ 3988.736692] mutex_lock+0x2f/0x40
[ 3988.736711] ionic_stop_queues_reconfig+0x16/0x40 [ionic]
[ 3988.736726] ionic_reconfigure_queues+0x43e/0xc90 [ionic]
[ 3988.736738] ionic_lif_config_hwstamp_rxq_all+0x85/0x90 [ionic]
[ 3988.736751] ionic_lif_hwstamp_set_ts_config+0x29c/0x360 [ionic]
[ 3988.736763] ionic_lif_hwstamp_set+0x76/0xf0 [ionic]
[ 3988.736776] ionic_eth_ioctl+0x33/0x40 [ionic]
[ 3988.736781] dev_ifsioc+0x12c/0x420
[ 3988.736785] dev_ioctl+0x316/0x720
This can be demonstrated with "ptp4l -m -i <intf>"
To fix this, we pull the use of the queue_lock further up above the
callers of ionic_reconfigure_queues() and ionic_stop_queues_reconfig().
Fixes: 7ee99fc5ed ("ionic: pull hwstamp queue_lock up a level")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The queues can be freed in ionic_close(). They need to be recreated
after ionic_open(). It doesn't need to replay the whole config. It
only needs to create the timestamping queues again.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the hwstamp configuration use of queue_lock up
a level to simplify use and error handling.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the queue configuration lock to ionic_open() and
ionic_stop() so that they don't collide with other in parallel
queue configuration actions such as MTU changes as can be
demonstrated with a tight loop of ifup/change-mtu/ifdown.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the ctx struct has the new mac address before
any save operations happen.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases of fw_down it was called because there was a
fw_generation change, and the firmware is already back up.
In order to keep the down time to a minimum, don't wait for
the next watchdog polling cycle, fire another watchdog off
as soon as we can - an out-of-cycle check won't hurt, and
may well speed up the recovery.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we go into PROMISC mode when we have too many
filters by specifically counting the filters that successfully
get saved to the firmware.
The device advertises max_ucast_filters and max_mcast_filters,
but really only has max_ucast_filters slots available for
uc and mc filters combined.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The filter counting in ionic_lif_addr() really isn't useful,
and potentially misleading, especially when we're checking in
ionic_lif_rx_mode() to see if we need to go into PROMISC mode.
We can safely refactor this and remove a calling layer.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to separate the atomic needs of __dev_uc_sync()
and __dev_mc_sync() from the safe rx_mode handling, we need
to have the ndo handler manipulate the driver's filter list,
and later have the driver sync the filters to the firmware,
outside of the atomic context.
Here we put __dev_mc_sync() and __dev_uc_sync() back into the
ndo callback to give them their netif_addr_lock context and
have them update the driver's filter list, flagging changes
that should be made to the device filter list. Later, in the
rx_mode handler, we read those hints and sync up the device's
list as needed.
It is possible for multiple add/delete requests to come from
the stack before the rx_mode task processes the list, but the
handling of the sync status flag should keep everything sorted
correctly. For example, if a delete of an existing filter is
followed by another add before the rx_mode task is run, as can
happen when going in and out of a bond, the add will cancel
the delete and no actual changes will be sent to the device.
We also add a check in the watchdog to see if there are any
stray unsync'd filters, possibly left over from a filter
overflow and waiting to get sync'd after some other filter
gets removed to make room.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since only two functions call through ionic_set_rx_mode(), one
that can sleep and one that can't, we can split the function
and put the bits of code into the callers. This removes an
unnecessary calling layer.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the move of mac filter handling to outside of the
ndo_rx_mode context using the IONIC_DW_TYPE_RX_MODE,
we no longer are using IONIC_DW_TYPE_RX_ADDR_ADD and
IONIC_DW_TYPE_RX_ADDR_DEL and they can be removed.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there's only one queue, there is no need to enable
the rxhashing.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize err to 0 instead of ENOMEM, and specifically set
err to ENOMEM in the devm_kcalloc() failure cases.
Also, add an error message to the end of reconfig.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in a small kdump kernel, we can play nice and
minimize our resource use to help make sure that kdump is
successful in its mission.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the interrupt coalesce value update out of the napi
thread and into the dim_work thread and set it only when it
has actually changed.
Fixes: 04a834592b ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the bulk of the code from ionic_set_rx_mode(), which
can be called from atomic context, into ionic_lif_rx_mode()
which is a safe context.
A call from the stack will get pushed off into a work thread,
but it is also possible to simultaneously have a call driven
by a queue reconfig request from an ethtool command or fw
recovery event. We add a mutex around the rx_mode work to be
sure they don't collide.
Fixes: 81dbc24147 ("ionic: change set_rx_mode from_ndo to can_sleep")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the call into ionic_lif_hwstamp_set() to have two
separate interfaces, one from the ioctl() for changing the
configuration and one for replaying the current configuration
after a FW RESET.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When starting the queues in the link-check, don't go into
the BROKEN state if the return was EBUSY.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When returning after a firmware reset, re-start the
PTP after we've restarted the general queues.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let the network stack know we've got support for timestamping
the packets.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Tx and Rx timestamped packets are handled through separate
queues. Here we set them up, service them, and tear them down
along with the normal Tx and Rx queues.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do hardware timestamping through a separate Tx queue,
and optionally through a separate Rx queue. These queues
are allocated, freed, and tracked separately from the basic
queue arrays.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are changes to compile and link the new code, but no
new feature support is available or advertised yet.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparating for hardware timestamping, we need to support
large Tx and Rx completion descriptors. Here we add the new
queue feature ids and handling for the completion descriptor
sizes.
We only are adding support for the Rx 2x sized completion
descriptors in the general Rx queues for now as we will be
using it for PTP Rx support, and we don't have an immediate
use for the large descriptors in the general Tx queues yet;
it will be used in a special Tx queues added in one of the
next few patches.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add queue feature extensions to prepare for features that
can be queue specific, in addition to the general queue
features already defined. While we're here, change the
existing feature ids from #defines to enum.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the actual pointer that we care about as the subject of the
sizeof, rather than a struct name.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't destroy the adminq while there is an outstanding request.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now we've been ignoring any error return from the
queue starting in the link status check, so we fix that here.
If the driver had to reset and couldn't get things running
properly again, for example after a Tx Timeout and the FW is
not responding to commands, don't let the link watchdog try
to restart the queues. At this point the user can try to DOWN
and UP the device to clear the errors.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block some actions while the FW is in a reset activity
and the queues are not configured.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can get to the counter without going through the pointer
that the robot complained about.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qcq->intr.index was set when the queue was allocated,
there is no need to reach around to find it.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Catch a couple of missing macro name uses, fix a couple
of misspellings, etc.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
With a reconfigure of each queue is needed a rebuild of
the matching debugfs information.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up a couple of struct uses to make for better fast path
access.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Order of operations is slightly more correct in the driver
to change the netdev->mtu after the queues have been stopped
rather than before.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove memory allocation fail messages where the OOM stack
trace will make it obvious which allocation request failed.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski