DMA synchronization hook checks whether interrupt is raised by testing
corresponding bit in a hardware status register, and thus, clock should
be enabled in this case, otherwise CPU may hang if synchronization is
invoked while Runtime PM is in suspended state. This patch resumes the RPM
during of the DMA synchronization process in order to avoid potential
problems. It is a minor clean up of a previous commit, no real problem is
fixed by this patch because currently RPM is always in a resumed state
while DMA is synchronized, although this may change in the future.
Fixes: 6697255f23 ("dmaengine: tegra-apb: Improve DMA synchronization")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200426190835.21950-1-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the channel register code was changed to allow hotplug operations,
dynamic indexing wasn't taken into account. When channels are randomly
plugged and unplugged out of order, the serial indexing breaks. Convert
channel indexing to using IDA tracking in order to allow dynamic
assignment. The previous code does not cause any regression bug for
existing channel allocation besides idxd driver since the hotplug usage
case is only used by idxd at this point.
With this change, the chan->idr_ref is also not needed any longer. We can
have a device with no channels registered due to hot plug. The channel
device release code no longer should attempt to free the dma device id on
the last channel release.
Fixes: e81274cd6b ("dmaengine: add support to dynamic register/unregister of channels")
Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[BUG]
One run of btrfs/063 triggered the following lockdep warning:
============================================
WARNING: possible recursive locking detected
5.6.0-rc7-custom+ #48 Not tainted
--------------------------------------------
kworker/u24:0/7 is trying to acquire lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
but task is already holding lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sb_internal#2);
lock(sb_internal#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u24:0/7:
#0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80
#1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80
#2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
#3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs]
stack backtrace:
CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x11a
__lock_acquire.cold+0xce/0x214
lock_acquire+0xe6/0x210
__sb_start_write+0x14e/0x290
start_transaction+0x66c/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
find_free_extent+0x1504/0x1a50 [btrfs]
btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
btrfs_alloc_tree_block+0x1ac/0x570 [btrfs]
btrfs_copy_root+0x213/0x580 [btrfs]
create_reloc_root+0x3bd/0x470 [btrfs]
btrfs_init_reloc_root+0x2d2/0x310 [btrfs]
record_root_in_trans+0x191/0x1d0 [btrfs]
btrfs_record_root_in_trans+0x90/0xd0 [btrfs]
start_transaction+0x16e/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
btrfs_work_helper+0x116/0x9a0 [btrfs]
process_one_work+0x632/0xb80
worker_thread+0x80/0x690
kthread+0x1a3/0x1f0
ret_from_fork+0x27/0x50
It's pretty hard to reproduce, only one hit so far.
[CAUSE]
This is because we're calling btrfs_join_transaction() without re-using
the current running one:
btrfs_finish_ordered_io()
|- btrfs_join_transaction() <<< Call #1
|- btrfs_record_root_in_trans()
|- btrfs_reserve_extent()
|- btrfs_join_transaction() <<< Call #2
Normally such btrfs_join_transaction() call should re-use the existing
one, without trying to re-start a transaction.
But the problem is, in btrfs_join_transaction() call #1, we call
btrfs_record_root_in_trans() before initializing current::journal_info.
And in btrfs_join_transaction() call #2, we're relying on
current::journal_info to avoid such deadlock.
[FIX]
Call btrfs_record_root_in_trans() after we have initialized
current::journal_info.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.
Consider the following example with comments explaining how and why it
happens.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our test file with 2 consecutive prealloc extents, each with a
# size of 128Kb, and covering the range from 0 to 256Kb, with a file
# size of 0.
$ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
$ xfs_io -c "falloc -k 128K 128K" /mnt/foo
# Fsync the file to record both extents in the log tree.
$ xfs_io -c "fsync" /mnt/foo
# Now do a redudant extent allocation for the range from 0 to 64Kb.
# This will merely increase the file size from 0 to 64Kb. Instead we
# could also do a truncate to set the file size to 64Kb.
$ xfs_io -c "falloc 0 64K" /mnt/foo
# Fsync the file, so we update the inode item in the log tree with the
# new file size (64Kb). This also ends up setting the number of bytes
# for the first prealloc extent to 64Kb. This is done by the truncation
# at btrfs_log_prealloc_extents().
# This means that if a power failure happens after this, a write into
# the file range 64Kb to 128Kb will not use the prealloc extent and
# will result in allocation of a new extent.
$ xfs_io -c "fsync" /mnt/foo
# Now set the file size to 256K with a truncate and then fsync the file.
# Since no changes happened to the extents, the fsync only updates the
# i_size in the inode item at the log tree. This results in an implicit
# hole for the file range from 64Kb to 128Kb, something which fsck will
# complain when not using the NO_HOLES feature if we replay the log
# after a power failure.
$ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo
So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.
A test case for fstests follows soon.
Fixes: 31d11b83b9 ("Btrfs: fix duplicate extents after fsync of file with prealloc extents")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When jumping to the out_put_disk label, we will call put_disk(), which will
trigger a call to disk_release(), which calls blk_put_queue().
Later in the cleanup code, we do blk_cleanup_queue(), which will also call
blk_put_queue().
Putting the queue twice is incorrect, and will generate a KASAN splat.
Set the disk->queue pointer to NULL, before calling put_disk(), so that the
first call to blk_put_queue() will not free the queue.
The second call to blk_put_queue() uses another pointer to the same queue,
so this call will still free the queue.
Fixes: 85136c0102 ("lightnvm: simplify geometry enumeration")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
... to protect the modification of mp->m_count done by it. Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Transitioned power state logged at the end of setting ACPI power.
However, D3cold won't be in the message because state can only be
D3hot at most.
Use target_state to corretly report when power state is D3cold.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the kernel threads are not frozen in software_resume(), so
between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(),
system_freezable_power_efficient_wq can still try to submit SCSI
commands and this can cause a panic since the low level SCSI driver
(e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept
any SCSI commands: https://lkml.org/lkml/2020/4/10/47
At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying
to resolve the issue from hv_storvsc, but with the help of
Bart Van Assche, I realized it's better to fix software_resume(),
since this looks like a generic issue, not only pertaining to SCSI.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=x+F1
-----END PGP SIGNATURE-----
Merge tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for
stable and the others to fix a missing spinlock during reconnect"
* tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialised lease_key in open_shroot()
cifs: ensure correct super block for DFS reconnect
cifs: do not share tcons with DFS
cifs: minor update to comments around the cifs_tcp_ses_lock mutex
cifs: protect updating server->dstaddr with a spinlock
Here are a number of USB driver fixes for 5.7-rc3.
Nothing huge, just the usual collection of:
- xhci fixes
- gadget driver fixes
- syzkaller fuzzing fixes
- new device ids and DT bindings
- new quirks added for broken devices
A few of the gadget driver fixes show up twice here as they were applied
to my branch, and also by Felipe to his branch which I then pulled in as
we got out of sync a bit.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVfog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynVFwCfb33URz0KrXE+ipecpheVEoMdvDsAoIuYG4cb
qxLwEE6203jdICq9/nDg
=8f/s
-----END PGP SIGNATURE-----
Merge tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 5.7-rc3.
Nothing huge, just the usual collection of:
- xhci fixes
- gadget driver fixes
- syzkaller fuzzing fixes
- new device ids and DT bindings
- new quirks added for broken devices
A few of the gadget driver fixes show up twice here as they were
applied to my branch, and also by Felipe to his branch which I then
pulled in as we got out of sync a bit.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: sisusbvga: Change port variable from signed to unsigned
usb-storage: Add unusual_devs entry for JMicron JMS566
USB: hub: Revert commit bd0e6c9614 ("usb: hub: try old enumeration scheme first for high speed devices")
USB: hub: Fix handling of connect changes during sleep
usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
xhci: Don't clear hub TT buffer on ep0 protocol stall
xhci: prevent bus suspend if a roothub port detected a over-current condition
xhci: Fix handling halted endpoint even if endpoint ring appears empty
usb: raw-gadget: Fix copy_to/from_user() checks
usb: raw-gadget: fix raw_event_queue_fetch locking
usb: gadget: udc: atmel: Fix vbus disconnect handling
usb: dwc3: gadget: Fix request completion check
USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
cdc-acm: introduce a cool down
cdc-acm: close race betrween suspend() and acm_softint
UAS: fix deadlock in error handling and PM flushing work
UAS: no use logging any details in case of ENODEV
...
Here are some tty and serial driver fixes for 5.7-rc3.
The "largest" in here are a number of reverts for previous changes to
the uartps serial driver that turned out to not be a good idea at all.
The others are just small fixes found by people and tools. Included in
here is a much-reported symbol export needed by previous changes that
happened in 5.7-rc1. All of these have been in linux-next for a while
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVgiQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynvFgCfR5YTJnCrJUbPqGAuguZYlSGzNzUAoMTc4W9A
H4nsF9NweTl+FHFQq4J+
=xWz2
-----END PGP SIGNATURE-----
Merge tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for 5.7-rc3.
The "largest" in here are a number of reverts for previous changes to
the uartps serial driver that turned out to not be a good idea at all.
The others are just small fixes found by people and tools. Included in
here is a much-reported symbol export needed by previous changes that
happened in 5.7-rc1. All of these have been in linux-next for a while
with no reported issues"
* tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: hvc: fix buffer overflow during hvc_alloc().
tty: rocket, avoid OOB access
tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart
vt: don't hardcode the mem allocation upper bound
tty: serial: owl: add "much needed" clk_prepare_enable()
vt: don't use kmalloc() for the unicode screen buffer
tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
serial: sunhv: Initialize lock for non-registered console
Revert "serial: uartps: Register own uart console and driver structures"
Revert "serial: uartps: Move Port ID to device data structure"
Revert "serial: uartps: Change uart ID port allocation"
Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"
Revert "serial: uartps: Fix error path when alloc failed"
Revert "serial: uartps: Use the same dynamic major number for all ports"
Revert "serial: uartps: Fix uartps_major handling"
Here are 4 small misc driver fixes for 5.7-rc3:
- mei driver fix
- interconnect driver fix
- 2 fpga driver fixes
All have been in linux-next with no reported issue
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVmbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynYSACghD2iG6TQyaKnNOUZWwssrTJxWs8AoIxC5q3m
UerIRQ2QQRO6ZqdsnizG
=TUCP
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 4 small misc driver fixes for 5.7-rc3:
- mei driver fix
- interconnect driver fix
- two fpga driver fixes
All have been in linux-next with no reported issues"
* tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: qcom: Fix uninitialized tcs_cmd::wait
mei: me: fix irq number stored in hw struct
fpga: dfl: pci: fix return value of cci_pci_sriov_configure
fpga: zynq: Remove clk_get error message for probe defer
Here are some small staging and IIO driver fixes for 5.7-rc3
Lots of tiny things for reported issues in staging and IIO drivers,
including a counter driver fix as well (the iio drivers seem to be tied
to those). Full details of the fixes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVi+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynLVACeMUPjrHp/NiueD8hcN9F2iXRN3D8AoI6fU5bL
DsFiYs8n1TaZdEd7nbl0
=7wq7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.7-rc3
Lots of tiny things for reported issues in staging and IIO drivers,
including a counter driver fix as well (the iio drivers seem to be
tied to those). Full details of the fixes are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits)
staging: vt6656: Fix calling conditions of vnt_set_bss_mode
staging: comedi: Fix comedi_device refcnt leak in comedi_open
staging: vt6656: Fix pairwise key entry save.
staging: vt6656: Fix drivers TBTT timing counter.
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.
MAINTAINERS: remove Stefan Popa's email
iio: adc: ad7192: fix null pointer de-reference crash during probe
iio: core: remove extra semi-colon from devm_iio_device_register() macro
iio: adc: ti-ads8344: properly byte swap value
iio: imu: inv_mpu6050: fix suspend/resume with runtime power
iio: st_sensors: rely on odr mask to know if odr can be set
iio: xilinx-xadc: Make sure not exceed maximum samplerate
iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
iio: xilinx-xadc: Fix ADC-B powerdown
iio: dac: ad5770r: fix off-by-one check on maximum number of channels
iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
iio: core: Fix handling of 'dB'
dt-bindings: iio: adc: stm32-adc: fix id relative path
counter: 104-quad-8: Add lock guards - generic interface
...
Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that got
merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the final
patch here reverts part of that, re-exporting the symbol to resolve that
issue. All of these patches, with the exception of the final one, have
been in linux-next with only that one reported issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVliw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymf6ACfS5HoPt+kWKtfKteN/mt6WUeJz6oAoMDg4Qvf
4ncqmH9jt0lj5NAwHxFi
=DP2q
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small firmware/driver core/debugfs fixes for 5.7-rc3.
The debugfs change is now possible as now the last users of
debugfs_create_u32() have been fixed up in the different trees that
got merged into 5.7-rc1, and I don't want it creeping back in.
The firmware changes did cause a regression in linux-next, so the
final patch here reverts part of that, re-exporting the symbol to
resolve that issue. All of these patches, with the exception of the
final one, have been in linux-next with only that one reported issue"
* tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: revert removal of the fw_fallback_config export
debugfs: remove return value of debugfs_create_u32()
firmware_loader: remove unused exports
firmware: imx: fix compile-testing
- Add few notrace annotations to avoid potential crashes when switching
ftrace tracers.
- Avoid setting affinity for floating irqs in pci code.
- Fix build issue found by kbuild test robot.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl6lOMoACgkQjYWKoQLX
FBjQFQf/cA+F2tvEC+0YetUmwSaR+iPsCsgtCCSlBq5E8cCkzCf9uHVsXkmC647O
6vMsbFh7TeGmLbYPtgl/mFRjsuoVgD/Gm5TMm2nsWqZ3+C7pd8cMXCLY7dAtFb5d
judNcL0LSeBpytUflMLd2nXjuD90Y4dNd7J3WNC2l5/fdUW+Bd+97B+zj385wrTs
Z4Ab4KBzv+79e+4iMtn7xiK+RMnhP/pDij1RbtAI1XS33cigjSkZQb5gC/Yxb4Qy
badzecGOmdpod8A76didEeTTQ50bknT47dASwhguuDhdBZj36+SEnUXL0tiT1TFW
/Za3Q+rLFOe8OEqTsCBzEF55ijkXZQ==
=CBXL
-----END PGP SIGNATURE-----
Merge tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Add a few notrace annotations to avoid potential crashes when
switching ftrace tracers.
- Avoid setting affinity for floating irqs in pci code.
- Fix build issue found by kbuild test robot.
* tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/protvirt: fix compilation issue
s390/pci: do not set affinity for floating irqs
s390/ftrace: fix potential crashes when switching tracers
- One important fix for a bug in the way we find the cache-line size from the
device tree, which was leading to the wrong size being reported to userspace
on some platforms.
- A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around leading
to a window at boot when the strict mapping wasn't enforced.
- A fix to enable our KUAP (kernel user access prevention) debugging on PPC32.
- A build fix for clang in lib/mpi.
Thanks to:
Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai.
-----BEGIN PGP SIGNATURE-----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=pjVW
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One important fix for a bug in the way we find the cache-line size
from the device tree, which was leading to the wrong size being
reported to userspace on some platforms.
- A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around
leading to a window at boot when the strict mapping wasn't enforced.
- A fix to enable our KUAP (kernel user access prevention) debugging on
PPC32.
- A build fix for clang in lib/mpi.
Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai.
* tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
lib/mpi: Fix building for powerpc with clang
powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32
powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure
powerpc/setup_64: Set cache-line-size based on cache-block-size
A couple of schema and kbuild fixes.
-----BEGIN PGP SIGNATURE-----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=6JyE
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more Devicetree fixes from Rob Herring:
"A couple of schema and kbuild fixes"
* tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: phy: qcom-qusb2: Fix defaults
dt-bindings: Fix erroneous 'additionalProperties'
dt-bindings: Fix command line length limit calling dt-mk-schema
dt-bindings: Re-enable core schemas for dtbs_check
Christoph's patch removed two unsused exported symbols, however, one
symbol is used by the firmware_loader itself. If CONFIG_FW_LOADER=m so
the firmware_loader is modular but CONFIG_FW_LOADER_USER_HELPER=y we fail
the build at mostpost.
ERROR: modpost: "fw_fallback_config" [drivers/base/firmware_loader/firmware_class.ko] undefined!
This happens because the variable fw_fallback_config is built into the
kernel if CONFIG_FW_LOADER_USER_HELPER=y always, so we need to grant
access to the firmware loader module by exporting it.
Revert only one hunk from his patch.
Fixes: 739604734b ("firmware_loader: remove unused exports")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200424184916.22843-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apparently interface 1 is control interface akin to HD500X,
setting LINE6_CAP_CONTROL and choosing it as ctrl_if fixes
audio playback on POD HD500.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200425201115.3430-1-anarsoul@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull pid leak fix from Eric Biederman:
"Oleg noticed that put_pid(thread_pid) was not getting called when proc
was not compiled in.
Let's get that fixed before 5.7 is released and causes problems for
anyone"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Put thread_pid in release_task not proc_flush_pid
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DOTJ
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixlet from Ingo Molnar:
"A single fix for a comment that may show up in DocBook output"
* tag 'timers-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/datapage: Use correct clock mode name in comment
- an uclamp accounting fix
- three frequency invariance fixes and a readability improvement
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5Wor
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- an uclamp accounting fix
- three frequency invariance fixes and a readability improvement"
* tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix reset-on-fork from RT with uclamp
x86, sched: Move check for CPU type to caller function
x86, sched: Don't enable static key when starting secondary CPUs
x86, sched: Account for CPUs with less than 4 cores in freq. invariance
x86, sched: Bail out of frequency invariance if base frequency is unknown
- fix exit event records
- extend x86 PMU driver enumeration to add Intel Jasper Lake CPU support.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pEo5
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two changes:
- fix exit event records
- extend x86 PMU driver enumeration to add Intel Jasper Lake CPU
support"
* tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix parent pid/tid in task exit events
perf/x86/cstate: Add Jasper Lake CPU support
nfs4_proc_layoutget() invokes rpc_run_task(), which return the value to
"task". Since rpc_run_task() is impossible to return an ERR pointer,
there is no need to add the IS_ERR() condition on "task" here. So we
need to remove it.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST
set but CONFIG_KVM unset.
This patch fixes the issue by making the needed variable always available.
Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Philipp Rudo <prudo@linux.ibm.com>
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-04-24
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 5 day(s) which contain
a total of 19 files changed, 203 insertions(+), 85 deletions(-).
The main changes are:
1) link_update fix, from Andrii.
2) libbpf get_xdp_id fix, from David.
3) xadd verifier fix, from Jann.
4) x86-32 JIT fixes, from Luke and Wang.
5) test_btf fix, from Stanislav.
6) freplace verifier fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.
[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
Fix the following sparse warning:
kernel/bpf/syscall.c:2289:30: warning: symbol 'bpf_link_fops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1587609160-117806-1-git-send-email-zou_wei@huawei.com
In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
For some program types, the verifier relies on the expected_attach_type of
the program being verified in the verification process. However, for
freplace programs, the attach type was not propagated along with the
verifier ops, so the expected_attach_type would always be zero for freplace
programs.
This in turn caused the verifier to sometimes make the wrong call for
freplace programs. For all existing uses of expected_attach_type for this
purpose, the result of this was only false negatives (i.e., freplace
functions would be rejected by the verifier even though they were valid
programs for the target they were replacing). However, should a false
positive be introduced, this can lead to out-of-bounds accesses and/or
crashes.
The fix introduced in this patch is to propagate the expected_attach_type
to the freplace program during verification, and reset it after that is
done.
Fixes: be8704ff07 ("bpf: Introduce dynamic program extensions")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526726.293902.13257293296560360508.stgit@toke.dk
Fix bug of not putting bpf_link in LINK_UPDATE command.
Also enforce zeroed old_prog_fd if no BPF_F_REPLACE flag is specified.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424052045.4002963-1-andriin@fb.com
When verifier_zext is true, we don't need to emit code
for zero-extension.
Fixes: 836256bf5f ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.
This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.
Fixes: 03f5781be2 ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:
EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.
This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.
Fixes: 03f5781be2 ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.
However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.
This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.
However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.
This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two minor fixes one to update a Kconfig reference and the other to fix
an unreleased resource on an error path in sg.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXqNmSiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe7UAQDtHoV6
J5eaOyp8nI2XZHTU0LWoeQgk4Vj20weoAOATzAEAyWQJ2qBVeLviOhWDaCECquCm
lkjjUWOcSvk+KoJZj/M=
=OeoR
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes: one to update a Kconfig reference and the other to
fix a resource leak on an error path in sg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Update referenced link to cdrtools
scsi: sg: add sg_remove_request in sg_write
The defaults listed in the bindings don't match what the code is
actually doing. Presumably existing users care more about keeping
existing behavior the same, so change the bindings to match the code
in Linux.
The "qcom,preemphasis-level" default has been wrong for quite a long
time (May 2018). The other two were recently added.
As some evidence that these values are wrong, this is from the Linux
driver:
- qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits. Driver
programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0.
- qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits.
Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 &
0x3f) = 0x20 = 32.
- qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits. Driver
programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1.
Fixes: 1e6f134eb6 ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters")
Fixes: a8b70ccf10 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.
In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.
Reported-by: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Oleg pointed out that in the unlikely event the kernel is compiled
with CONFIG_PROC_FS unset that release_task will now leak the pid.
Move the put_pid out of proc_flush_pid into release_task to fix this
and to guarantee I don't make that mistake again.
When possible it makes sense to keep get and put in the same function
so it can easily been seen how they pair up.
Fixes: 7bc3e6e55a ("proc: Use a list of inodes to flush from proc")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Dmitry Osipenko