bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A
deadlock on rq_lock():
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[...]
Call Trace:
try_to_wake_up+0x1ad/0x590
wake_up_q+0x54/0x80
rwsem_wake+0x8a/0xb0
bpf_get_stack+0x13c/0x150
bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000
bpf_overflow_handler+0x60/0x100
__perf_event_overflow+0x4f/0xf0
perf_swevent_overflow+0x99/0xc0
___perf_sw_event+0xe7/0x120
__schedule+0x47d/0x620
schedule+0x29/0x90
futex_wait_queue_me+0xb9/0x110
futex_wait+0x139/0x230
do_futex+0x2ac/0xa50
__x64_sys_futex+0x13c/0x180
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This can be reproduced by:
1. Start a multi-thread program that does parallel mmap() and malloc();
2. taskset the program to 2 CPUs;
3. Attach bpf program to trace_sched_switch and gather stackmap with
build-id, e.g. with trace.py from bcc tools:
trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch
A sample reproducer is attached at the end.
This could also trigger deadlock with other locks that are nested with
rq_lock.
Fix this by checking whether irqs are disabled. Since rq_lock and all
other nested locks are irq safe, it is safe to do up_read() when irqs are
not disable. If the irqs are disabled, postpone up_read() in irq_work.
Fixes: 615755a77b ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com
Reproducer:
============================ 8< ============================
char *filename;
void *worker(void *p)
{
void *ptr;
int fd;
char *pptr;
fd = open(filename, O_RDONLY);
if (fd < 0)
return NULL;
while (1) {
struct timespec ts = {0, 1000 + rand() % 2000};
ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
usleep(1);
if (ptr == MAP_FAILED) {
printf("failed to mmap\n");
break;
}
munmap(ptr, 4096 * 64);
usleep(1);
pptr = malloc(1);
usleep(1);
pptr[0] = 1;
usleep(1);
free(pptr);
usleep(1);
nanosleep(&ts, NULL);
}
close(fd);
return NULL;
}
int main(int argc, char *argv[])
{
void *ptr;
int i;
pthread_t threads[THREAD_COUNT];
if (argc < 2)
return 0;
filename = argv[1];
for (i = 0; i < THREAD_COUNT; i++) {
if (pthread_create(threads + i, NULL, worker, NULL)) {
fprintf(stderr, "Error creating thread\n");
return 0;
}
}
for (i = 0; i < THREAD_COUNT; i++)
pthread_join(threads[i], NULL);
return 0;
}
============================ 8< ============================
Make the compiler report a clear error when bpf_helpers_doc.py needs
updating rather than rely on the fact that Clang fails to compile
English:
../../../lib/bpf/bpf_helper_defs.h:2707:1: error: unknown type name 'Unrecognized'
Unrecognized type 'struct bpf_inet_lookup', please add it to known types!
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191016085811.11700-1-jakub@cloudflare.com
Recently couple of files that are write only were added to netdevsim
debugfs. Don't read these files and avoid error.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Make sure BPF_PROG_TEST_RUN accepts tstamp and exports any
modifications that BPF program does.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191015183125.124413-2-sdf@google.com
It's useful for implementing EDT related tests (set tstamp, run the
test, see how the tstamp is changed or observe some other parameter).
Note that bpf_ktime_get_ns() helper is using monotonic clock, so for
the BPF programs that compare tstamp against it, tstamp should be
derived from clock_gettime(CLOCK_MONOTONIC, ...).
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191015183125.124413-1-sdf@google.com
Andrii Nakryiko says:
====================
This patch set generalizes libbpf's CO-RE relocation support. In addition to
existing field's byte offset relocation, libbpf now supports field existence
relocations, which are emitted by Clang when using
__builtin_preserve_field_info(<field>, BPF_FIELD_EXISTS). A convenience
bpf_core_field_exists() macro is added to bpf_core_read.h BPF-side header,
along the bpf_field_info_kind enum containing currently supported types of
field information libbpf supports. This list will grow as libbpf gains support
for other relo kinds.
This patch set upgrades the format of .BTF.ext's relocation record to match
latest Clang's format (12 -> 16 bytes). This is not a breaking change, as the
previous format hasn't been released yet as part of official Clang version
release.
v1->v2:
- unify bpf_field_info_kind enum and naming changes (Alexei);
- added bpf_core_field_exists() to bpf_core_read.h.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of tests validating CO-RE is handling field existence
relocation. Relaxed CO-RE relocation mode is activated for these new
tests to prevent libbpf from rejecting BPF object for no-match
relocation, even though test BPF program is not going to use that
relocation, if field is missing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-6-andriin@fb.com
Add enum definition for Clang's __builtin_preserve_field_info()
second argument (info_kind). Currently only byte offset and existence
are supported. Corresponding Clang changes introducing this built-in can
be found at [0]
[0] https://reviews.llvm.org/D67980
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-5-andriin@fb.com
Add support for BPF_FRK_EXISTS relocation kind to detect existence of
captured field in a destination BTF, allowing conditional logic to
handle incompatible differences between kernels.
Also introduce opt-in relaxed CO-RE relocation handling option, which
makes libbpf emit warning for failed relocations, but proceed with other
relocations. Instruction, for which relocation failed, is patched with
(u32)-1 value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-4-andriin@fb.com
Refactor all the various bpf_object__open variations to ultimately
specify common bpf_object_open_opts struct. This makes it easy to keep
extending this common struct w/ extra parameters without having to
update all the legacy APIs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-3-andriin@fb.com
BTF offset reloc was generalized in recent Clang into field relocation,
capturing extra u32 field, specifying what aspect of captured field
needs to be relocated. This changes .BTF.ext's record size for this
relocation from 12 bytes to 16 bytes. Given these format changes
happened in Clang before official released version, it's ok to not
support outdated 12-byte record size w/o breaking ABI.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191015182849.3922287-2-andriin@fb.com
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Scatter/gather SPI for SJA1105 DSA
This is a small series that reduces the stack memory usage for the
sja1105 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reworks the SPI transfer implementation to make use of more of the
SPI core features. The main benefit is to avoid the memcpy in
sja1105_xfer_buf().
The memcpy was only needed because the function was transferring a
single buffer at a time. So it needed to copy the caller-provided buffer
at buf + 4, to store the SPI message header in the "headroom" area.
But the SPI core supports scatter-gather messages, comprised of multiple
transfers. We can actually use those to break apart every SPI message
into 2 transfers: one for the header and one for the actual payload.
To keep the behavior the same regarding the chip select signal, it is
necessary to tell the SPI core to de-assert the chip select after each
chunk. This was not needed before, because each spi_message contained
only 1 single transfer.
The meaning of the per-transfer cs_change=1 is:
- If the transfer is the last one of the message, keep CS asserted
- Otherwise, deassert CS
We need to deassert CS in the "otherwise" case, which was implicit
before.
Avoiding the memcpy creates yet another opportunity. The device can't
process more than 256 bytes of SPI payload at a time, so the
sja1105_xfer_long_buf() function used to exist, to split the larger
caller buffer into chunks.
But these chunks couldn't be used as scatter/gather buffers for
spi_message until now, because of that memcpy (we would have needed more
memory for each chunk). So we can now remove the sja1105_xfer_long_buf()
function and have a single implementation for long and short buffers.
Another benefit is lower usage of stack memory. Previously we had to
store 2 SPI buffers for each chunk. Due to the elimination of the
memcpy, we can now send pointers to the actual chunks from the
caller-supplied buffer to the SPI core.
Since the patch merges two functions into a rewritten implementation,
the function prototype was also changed, mainly for cosmetic consistency
with the structures used within it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cosmetic patch that reduces some boilerplate in the SPI
interaction of the driver.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable reg is being assigned a value that is never read
and is being re-assigned in the following for-loop. The
assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
PTP driver refactoring for SJA1105 DSA
This series creates a better separation between the driver core and the
PTP portion. Therefore, users who are not interested in PTP can get a
simpler and smaller driver by compiling it out.
This is in preparation for further patches: SPI transfer timestamping,
synchronizing the hardware clock (as opposed to keeping it
free-running), PPS input/output, etc.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PTP command register contains enable bits for:
- Putting the 64-bit PTPCLKVAL register in add/subtract or write mode
- Taking timestamps off of the corrected vs free-running clock
- Starting/stopping the TTEthernet scheduling
- Starting/stopping PPS output
- Resetting the switch
When a command needs to be issued (e.g. "change the PTPCLKVAL from write
mode to add/subtract mode"), one cannot simply write to the command
register setting the PTPCLKADD bit to 1, because that would zeroize the
other settings. One also cannot do a read-modify-write (that would be
too easy for this hardware) because not all bits of the command register
are readable over SPI.
So this leaves us with the only option of keeping the value of the PTP
command register in the driver, and operating on that.
Actually there are 2 types of PTP operations now:
- Operations that modify the cached PTP command. These operate on
ptp_data->cmd as a pointer.
- Operations that apply all previously cached PTP settings, but don't
otherwise cache what they did themselves. The sja1105_ptp_reset
function is such an example. It copies the ptp_data->cmd on stack
before modifying and writing it to SPI.
This practically means that struct sja1105_ptp_cmd is no longer an
implementation detail, since it needs to be stored in full into struct
sja1105_ptp_data, and hence in struct sja1105_private. So the (*ptp_cmd)
function prototype can change and take struct sja1105_ptp_cmd as second
argument now.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a non-functional change with 2 goals (both for the case when
CONFIG_NET_DSA_SJA1105_PTP is not enabled):
- Reduce the size of the sja1105_private structure.
- Make the PTP code more self-contained.
Leaving priv->ptp_data.lock to be initialized in sja1105_main.c is not a
leftover: it will be used in a future patch "net: dsa: sja1105: Restore
PTP time after switch reset".
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new rule (as already started for sja1105_tas.h) is for functions of
optional driver components (ones which may be disabled via Kconfig - PTP
and TAS) to take struct dsa_switch *ds instead of struct sja1105_private
*priv as first argument.
This is so that forward-declarations of struct sja1105_private can be
avoided.
So make sja1105_ptp.h the second user of this rule.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need priv->ptp_caps to hold a structure and not just a pointer,
because we use container_of in the various PTP callbacks.
Therefore, the sja1105_ptp_caps structure declared in the global memory
of the driver serves no further purpose after copying it into
priv->ptp_caps.
So just populate priv->ptp_caps with the needed operations and remove
sja1105_ptp_caps.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* minstrel improvements from Felix
* a TX aggregation simplification
* some additional capabilities for hwsim
* minor cleanups & docs updates
-----BEGIN PGP SIGNATURE-----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=IJ7D
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-net-next-2019-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
A few more small things, nothing really stands out:
* minstrel improvements from Felix
* a TX aggregation simplification
* some additional capabilities for hwsim
* minor cleanups & docs updates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing
to a separate function") moved attribute buffer allocation and attribute
parsing from genl_family_rcv_msg_doit() into a separate function
genl_family_rcv_msg_attrs_parse() which, unlike the previous code, calls
__nlmsg_parse() even if family->maxattr is 0 (i.e. the family does its own
parsing). The parser error is ignored and does not propagate out of
genl_family_rcv_msg_attrs_parse() but an error message ("Unknown attribute
type") is set in extack and if further processing generates no error or
warning, it stays there and is interpreted as a warning by userspace.
Dumpit requests are not affected as genl_family_rcv_msg_dumpit() bypasses
the call of genl_family_rcv_msg_attrs_parse() if family->maxattr is zero.
Move this logic inside genl_family_rcv_msg_attrs_parse() so that we don't
have to handle it in each caller.
v3: put the check inside genl_family_rcv_msg_attrs_parse()
v2: adjust also argument of genl_family_rcv_msg_attrs_free()
Fixes: c10e6cf85e ("net: genetlink: push attrbuf allocation and parsing to a separate function")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_zerocopy_receive() rounds down the zc->length a multiple of
PAGE_SIZE. This results in two issues:
- tcp_zerocopy_receive sets recv_skip_hint to the length of the
receive queue if the zc->length input is smaller than the
PAGE_SIZE, even though the data in receive queue could be
zerocopied.
- tcp_zerocopy_receive would set recv_skip_hint of 0, in cases
where we have a little bit of data after the perfectly-sized
packets.
To fix these issues, do not store the rounded down value in
zc->length. Round down the length passed to zap_page_range(),
and return min(inq, zc->length) when the zap_range is 0.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
Patch #1 enforces libbpf build to have bpf_helper_defs.h ready before test BPF
programs are built.
Patch #2 drops obsolete BTF/pahole detection logic from Makefile.
v1->v2:
- drop CPU and PROBE (Martin).
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given lots of selftests won't work without recent enough Clang/LLVM that
fully supports BTF, there is no point in maintaining outdated BTF
support detection and fall-back to pahole logic. Just assume we have
everything we need.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-3-andriin@fb.com
Given BPF programs rely on libbpf's bpf_helper_defs.h, which is
auto-generated during libbpf build, libbpf build has to happen before
we attempt progs/*.c build. Enforce it as order-only dependency.
Fixes: 24f25763d6 ("libbpf: auto-generate list of BPF helper definitions")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011220146.3798961-2-andriin@fb.com
Ivan Khoronzhuk says:
====================
This series contains mainly fixes/improvements for cross-compilation
but not only, tested for arm, arm64, and intended for any arch.
Also verified on native build (not cross compilation) for x86_64
and arm, arm64.
Initial RFC link:
https://lkml.org/lkml/2019/8/29/1665
Prev. version:
https://lkml.org/lkml/2019/10/9/1045
Besides the patches given here, the RFC also contains couple patches
related to llvm clang
arm: include: asm: swab: mask rev16 instruction for clang
arm: include: asm: unified: mask .syntax unified for clang
They are necessarily to verify arm 32 build.
Also, couple more fixes were added but are not merged in bpf-next yet,
they can be needed for verification/configuration steps, if not in
your tree the fixes can be taken here:
https://www.spinics.net/lists/netdev/msg601716.htmlhttps://www.spinics.net/lists/netdev/msg601714.htmlhttps://www.spinics.net/lists/linux-kbuild/msg23468.html
Now, to build samples, SAMPLE_BPF should be enabled in config.
The change touches not only cross-compilation and can have impact on
other archs and build environments, so might be good idea to verify
it in order to add appropriate changes, some warn options could be
tuned also.
All is tested on x86-64 with clang installed (has to be built containing
targets for arm, arm64..., see llc --version, usually it's present already)
Instructions to test native on x86_64
=================================================
Native build on x86_64 is done in usual way and shouldn't have difference
except HOSTCC is now printed as CC wile building the samples.
Instructions to test cross compilation on arm64
=================================================
gcc version 8.3.0
(GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))
I've used sdk for TI am65x got here:
http://downloads.ti.com/processor-sdk-linux/esd/AM65X/latest/exports/\
ti-processor-sdk-linux-am65xx-evm-06.00.00.07-Linux-x86-Install.bin
make ARCH=arm64 -C tools/ clean
make ARCH=arm64 -C samples/bpf clean
make ARCH=arm64 clean
make ARCH=arm64 defconfig
make ARCH=arm64 headers_install
make ARCH=arm64 INSTALL_HDR_PATH=/../sdk/\
ti-processor-sdk-linux-am65xx-evm-06.00.00.07/linux-devkit/sysroots/\
aarch64-linux/usr headers_install
make samples/bpf/ ARCH=arm64 CROSS_COMPILE="aarch64-linux-gnu-"\
SYSROOT="/../sdk/ti-processor-sdk-linux-am65xx-evm-06.00.00.07/\
linux-devkit/sysroots/aarch64-linux"
Instructions to test cross compilation on arm
=================================================
arm-linux-gnueabihf-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
or
arm-linux-gnueabihf-gcc
(GNU Toolchain for the A-profile Architecture 8.3-2019.03 \
(arm-rel-8.36)) 8.3.0
http://downloads.ti.com/processor-sdk-linux/esd/AM57X/05_03_00_07/exports/\
ti-processor-sdk-linux-am57xx-evm-05.03.00.07-Linux-x86-Install.bin
make ARCH=arm -C tools/ clean
make ARCH=arm -C samples/bpf clean
make ARCH=arm clean
make ARCH=arm omap2plus_defconfig
make ARCH=arm headers_install
make ARCH=arm INSTALL_HDR_PATH=/../sdk/\
ti-processor-sdk-linux-am57xx-evm-05.03.00.07/linux-devkit/sysroots/\
armv7ahf-neon-linux-gnueabi/usr headers_install
make samples/bpf/ ARCH=arm CROSS_COMPILE="arm-linux-gnueabihf-"\
SYSROOT="/../sdk/ti-processor-sdk-linux-am57xx-evm-05.03\
.00.07/linux-devkit/sysroots/armv7ahf-neon-linux-gnueabi"
Based on bpf-next/master
v5..v4:
- any changes, only missed SOBs are added
v4..v3:
- renamed CLANG_EXTRA_CFLAGS on BPF_EXTRA_CFLAGS
- used filter for ARCH_ARM_SELECTOR
- omit "-fomit-frame-pointer" and use same flags for native and "cross"
- used sample/bpf prefixes
- use C instead of C++ compiler for test_libbpf target
v3..v2:
- renamed makefile.progs to makeifle.target, as more appropriate
- left only __LINUX_ARM_ARCH__ for D options for arm
- for host build - left options from KBUILD_HOST for compatibility reasons
- split patch adding c/cxx/ld flags to libbpf by modules
- moved readme change to separate patch
- added patch setting options for cross-compile
- fixed issue with option error for syscall_nrs.S,
avoiding overlap for ccflags-y.
v2..v1:
- restructured patches order
- split "samples: bpf: Makefile: base progs build on Makefile.progs"
to make change more readable. It added couple nice extra patches.
- removed redundant patch:
"samples: bpf: Makefile: remove target for native build"
- added fix:
"samples: bpf: makefile: fix cookie_uid_helper_example obj build"
- limited -D option filter only for arm
- improved comments
- added couple instructions to verify cross compilation for arm and
arm64 arches based on TI am57xx and am65xx sdks.
- corrected include a little order
====================
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add couple preparation steps: clean and configuration. Also add newly
added sysroot support info to cross-compile section.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-16-ivan.khoronzhuk@linaro.org
Basically it only enables that was added by previous couple fixes.
Sysroot contains correct libs installed and its headers. Useful when
working with NFC or virtual machine.
Usage example:
clean (on demand)
make ARCH=arm -C samples/bpf clean
make ARCH=arm -C tools clean
make ARCH=arm clean
configure and install headers:
make ARCH=arm defconfig
make ARCH=arm headers_install
build samples/bpf:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- samples/bpf/ \
SYSROOT="path/to/sysroot"
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-15-ivan.khoronzhuk@linaro.org
In case of C/LDFLAGS there is no way to pass them correctly to build
command, for instance when --sysroot is used or external libraries
are used, like -lelf, wich can be absent in toolchain. This can be
used for samples/bpf cross-compiling allowing to get elf lib from
sysroot.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-13-ivan.khoronzhuk@linaro.org
No need to use C++ for test_libbpf target when libbpf is on C and it
can be tested with C, after this change the CXXFLAGS in makefiles can
be avoided, at least in bpf samples, when sysroot is used, passing
same C/LDFLAGS as for lib.
Add "return 0" in test_libbpf to avoid warn, but also remove spaces at
start of the lines to keep same style and avoid warns while apply.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-12-ivan.khoronzhuk@linaro.org
No need in hacking HOSTCC to be cross-compiler any more, so drop
this trick and use target CC for HDR_PROBE.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-11-ivan.khoronzhuk@linaro.org
While compiling natively, the host's cflags and ldflags are equal to
ones used from HOSTCFLAGS and HOSTLDFLAGS. When cross compiling it
should have own, used for target arch. While verification, for arm,
arm64 and x86_64 the following flags were used always:
-Wall -O2
-fomit-frame-pointer
-Wmissing-prototypes
-Wstrict-prototypes
So, add them as they were verified and used before adding
Makefile.target and lets omit "-fomit-frame-pointer" as were proposed
while review, as no sense in such optimization for samples.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-10-ivan.khoronzhuk@linaro.org
The main reason for that - HOSTCC and CC have different aims.
HOSTCC is used to build programs running on host, that can
cross-comple target programs with CC. It was tested for arm and arm64
cross compilation, based on linaro toolchain, but should work for
others.
So, in order to split cross compilation (CC) with host build (HOSTCC),
lets base samples on Makefile.target. It allows to cross-compile
samples/bpf programs with CC while auxialry tools running on host
built with HOSTCC.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-9-ivan.khoronzhuk@linaro.org
The Makefile.target is added only and will be used in
sample/bpf/Makefile later in order to switch cross-compiling to CC
from HOSTCC environment.
The HOSTCC is supposed to build binaries and tools running on the host
afterwards, in order to simplify build or so, like "fixdep" or else.
In case of cross compiling "fixdep" is executed on host when the rest
samples should run on target arch. In order to build binaries for
target arch with CC and tools running on host with HOSTCC, lets add
Makefile.target for simplicity, having definition and routines similar
to ones, used in script/Makefile.host. This allows later add
cross-compilation to samples/bpf with minimum changes.
The tprog stands for target programs built with CC.
Makefile.target contains only stuff needed for samples/bpf, potentially
can be reused later and now needed only for unblocking tricky
samples/bpf cross compilation.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-8-ivan.khoronzhuk@linaro.org
Drop inclusion for bpf_load -I$(objtree)/usr/include as it is
included for all objects anyway, with above line:
KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-7-ivan.khoronzhuk@linaro.org
For arm, -D__LINUX_ARM_ARCH__=X is min version used as instruction
set selector and is absolutely required while parsing some parts of
headers. It's present in KBUILD_CFLAGS but not in autoconf.h, so let's
retrieve it from and add to programs cflags. In another case errors
like "SMP is not supported" for armv7 and bunch of other errors are
issued resulting to incorrect final object.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191011002808.28206-6-ivan.khoronzhuk@linaro.org
It can overlap with CFLAGS used for libraries built with gcc if
not now then in next patches. Correct it here for simplicity.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-5-ivan.khoronzhuk@linaro.org
For cross compiling the target triple can be inherited from
cross-compile prefix as it's done in CLANG_FLAGS from kernel makefile.
So copy-paste this decision from kernel Makefile.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-4-ivan.khoronzhuk@linaro.org
Don't list userspace "cookie_uid_helper_example" object in list for
bpf objects.
'always' target is used for listing bpf programs, but
'cookie_uid_helper_example.o' is a user space ELF file, and covered
by rule `per_socket_stats_example`, so shouldn't be in 'always'.
Let us remove `always += cookie_uid_helper_example.o`, which avoids
breaking cross compilation due to mismatched includes.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-3-ivan.khoronzhuk@linaro.org
echo should be replaced with echo -e to handle '\n' correctly, but
instead, replace it with printf as some systems can't handle echo -e.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191011002808.28206-2-ivan.khoronzhuk@linaro.org
Jiri Pirko says:
====================
netdevsim: add devlink health reporters support
This patchset adds support for devlink health reporter interface
testing. First 2 patches are small dependencies of the last 2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests to verify functionality of netdevsim reporters.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement "empty" and "dummy" reporters. The first one is really simple
and does nothing. The other one has debugfs files to trigger breakage
and it is able to do recovery. The ops also implement dummy fmsg
content.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During health reporter operations, driver might want to fill-up
the extack message, so propagate extack down to the health reporter ops.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If reporter state is healthy, don't call into a driver for recover and
don't increase recovery count.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the MAC address is supplied via device tree or a random
MAC is generated it has to be written to the asix chip in
order to receive any data.
Previously in 9fb137aef3 ("net: usb: ax88179_178a: allow
optionally getting mac address from device tree") this line was
omitted because it seemed to work perfectly fine without it.
But it was simply not detected because the chip keeps the mac
stored even beyond a reset and it was tested on a hardware
with an integrated UPS where the asix chip was permanently
powered on even throughout power cycles.
Fixes: 9fb137aef3 ("net: usb: ax88179_178a: allow optionally getting mac address from device tree")
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu