The "struct_ops register" subcommand now allows for an optional *LINK_DIR*
to be included. This specifies the directory path where bpftool will pin
struct_ops links with the same name as their corresponding map names.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
You can include an optional path after specifying the object name for the
'struct_ops register' subcommand.
Since the commit 226bc6ae64 ("Merge branch 'Transit between BPF TCP
congestion controls.'") has been accepted, it is now possible to create a
link for a struct_ops. This can be done by defining a struct_ops in
SEC(".struct_ops.link") to make libbpf returns a real link. If we don't pin
the links before leaving bpftool, they will disappear. To instruct bpftool
to pin the links in a directory with the names of the maps, we need to
provide the path of that directory.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-1-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The recent support for inline annotations in control flow graphs
generated by bpftool introduced the usage of the "__fallthrough" macro
in a switch/case block in btf_dumper.c. This change went through the
bpf-next tree, but resulted in a merge conflict in linux-next, because
this macro has been renamed "fallthrough" (no underscores) in the
meantime.
To address the conflict, we temporarily switch to a simple comment
instead of a macro.
Related: commit f7a858bffc ("tools: Rename __fallthrough to fallthrough")
Fixes: 9fd496848b ("bpftool: Support inline annotations when dumping the CFG of a program")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/all/yt9dttxlwal7.fsf@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230412123636.2358949-1-tmricht@linux.ibm.com/
Link: https://lore.kernel.org/bpf/20230420003333.90901-1-quentin@isovalent.com
After commit d6e6286a12 ("libbpf: disassociate section handler on explicit
bpf_program__set_type() call"), bpf_program__set_type() will force cleanup
the program's SEC() definition, this commit fixed the test helper but missed
the bpftool, which leads to bpftool prog autoattach broken as follows:
$ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach
Program spi_xfer_r1v1 does not support autoattach, falling back to pinning
This patch fix bpftool to set program type only if it differs.
Fixes: d6e6286a12 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407081427.2621590-1-weiyongjun@huaweicloud.com
In bpftool's bash completion file, function _bpftool_once_attr() is able
to process multiple arguments. There are a few locations where this
function is called multiple times in a row, each time for a single
argument; let's pass all arguments instead to minimize the number of
function calls required for the completion.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for displaying opcodes or/and file references (filepath,
line and column numbers) when dumping the control flow graphs of loaded
BPF programs with bpftool.
The filepaths in the records are absolute. To avoid blocks on the graph
to get too wide, we truncate them when they get too long (but we always
keep the entire file name). In the unlikely case where the resulting
file name is ambiguous, it remains possible to get the full path with a
regular dump (no CFG).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping a program, the keywords "opcodes" (for printing the raw
opcodes), "linum" (for displaying the filename, line number, column
number along with the source code), and "visual" (for generating the
control flow graph for translated programs) are mutually exclusive. But
there's no reason why they should be. Let's make it possible to pass
several of them at once. The "file FILE" option, which makes bpftool
output a binary image to a file, remains incompatible with the others.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We do not support JSON output for control flow graphs of programs with
bpftool. So far, requiring both the CFG and JSON output would result in
producing a null JSON object. It makes more sense to raise an error
directly when parsing command line arguments and options, so that users
know they won't get any output they might expect.
If JSON is required for the graph, we leave it to Graphviz instead:
# bpftool prog dump xlated <REF> visual | dot -Tjson
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We support dumping the control flow graph of loaded programs to the DOT
format with bpftool, but so far this feature wouldn't display the source
code lines available through BTF along with the eBPF bytecode. Let's add
support for these annotations, to make it easier to read the graph.
In prog.c, we move the call to dump_xlated_cfg() in order to pass and
use the full struct dump_data, instead of creating a minimal one in
draw_bb_node().
We pass the pointer to this struct down to dump_xlated_for_graph() in
xlated_dumper.c, where most of the logics is added. We deal with BTF
mostly like we do for plain or JSON output, except that we cannot use a
"nr_skip" value to skip a given number of linfo records (we don't
process the BPF instructions linearly, and apart from the root of the
graph we don't know how many records we should skip, so we just store
the last linfo and make sure the new one we find is different before
printing it).
When printing the source instructions to the label of a DOT graph node,
there are a few subtleties to address. We want some special newline
markers, and there are some characters that we must escape. To deal with
them, we introduce a new dedicated function btf_dump_linfo_dotlabel() in
btf_dumper.c. We'll reuse this function in a later commit to format the
filepath, line, and column references as well.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The documentation states that when line_info is available when dumping a
program, the source line will be displayed "by default". There is no
notion of "default" here: the line is always displayed if available,
there is no way currently to turn it off.
In the next sentence, the documentation states that if "linum" is used
on the command line, the relevant filename, line, and column will be
displayed "on top of the source line". This is incorrect, as they are
currently displayed on the right side of the source line (or on top of
the eBPF instruction, not the source).
This commit fixes the documentation to address these points.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes: b66e907cfe ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Use the new type-safe wrappers around bpf_obj_get_info_by_fd().
Split the bpf_obj_get_info_by_fd() call in build_btf_type_table() in
two, since knowing the type helps with the Memory Sanitizer.
Improve map_parse_fd_and_info() type safety by using
struct bpf_map_info * instead of void * for info.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230214231221.249277-4-iii@linux.ibm.com
The number of online cpu may be not equal to possible cpu.
"bpftool prog profile" can not create pmu event on possible
but on online cpu.
$ dmidecode -s system-product-name
PowerEdge R620
$ cat /sys/devices/system/cpu/possible
0-47
$ cat /sys/devices/system/cpu/online
0-31
Disable cpu dynamically:
$ echo 0 > /sys/devices/system/cpu/cpuX/online
If one cpu is offline, perf_event_open will return ENODEV.
To fix this issue:
* check value returned and skip offline cpu.
* close pmu_fd immediately on error path, avoid fd leaking.
Fixes: 47c09d6a9f ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tonghao Zhang <tong@infragraf.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230202131701.29519-1-tong@infragraf.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When the clang toolchain has stack protection enabled in order to be
consistent with gcc - which just happens to be the case on Gentoo -
the bpftool build fails:
[...]
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/pid_iter.bpf.c -o pid_iter.bpf.o
clang \
-I. \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/include/uapi/ \
-I/tmp/portage/dev-util/bpftool-6.0.12/work/linux-6.0/tools/bpf/bpftool/bootstrap/libbpf/include \
-g -O2 -Wall -target bpf -c skeleton/profiler.bpf.c -o profiler.bpf.o
skeleton/profiler.bpf.c:40:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fentry_XXX)
^
skeleton/profiler.bpf.c:94:14: error: A call to built-in function '__stack_chk_fail' is not supported.
int BPF_PROG(fexit_XXX)
^
2 errors generated.
[...]
Since stack-protector makes no sense for the BPF bits just unconditionally
disable it.
Bug: https://bugs.gentoo.org/890638
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/74cd9d2e-6052-312a-241e-2b514a75c92c@applied-asynchrony.com
When bpftool feature does not find kernel config
files under default path or wrong format,
do not output CONFIG_XYZ is not set.
Skip kernel config check and continue.
Signed-off-by: Chethan Suresh <chethan.suresh@sony.com>
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230109023742.29657-1-chethan.suresh@sony.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When passing compiler variables like CC=$(HOSTCC) to a submake
we must ensure the variable is quoted in order to handle cases
where $(HOSTCC) may be multiple binaries.
For example when using ccache $HOSTCC may be:
"/usr/bin/ccache /usr/bin/gcc"
If we pass CC without quotes like CC=$(HOSTCC) only the first
"/usr/bin/ccache" part will be assigned to the CC variable which
will cause an error due to dropping the "/usr/bin/gcc" part of
the variable in the submake invocation.
This fixes errors such as:
/usr/bin/ccache: invalid option -- 'd'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230110014504.3120711-1-james.hilliard1@gmail.com
Since the commit eb9d1acf63 ("bpftool: Add LLVM as default library for
disassembling JIT-ed programs") we might link the bpftool program with the
libllvm library. This works fine when a shared libllvm library is available,
but fails if we want to link bpftool with a statically built LLVM:
[...]
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContextCleanup::~CrashRecoveryContextCleanup()':
CrashRecoveryContext.cpp:(.text._ZN4llvm27CrashRecoveryContextCleanupD0Ev+0x17): undefined reference to `operator delete(void*, unsigned long)'
/usr/bin/ld: /usr/local/lib/libLLVMSupport.a(CrashRecoveryContext.cpp.o): in function `llvm::CrashRecoveryContext::~CrashRecoveryContext()':
CrashRecoveryContext.cpp:(.text._ZN4llvm20CrashRecoveryContextD2Ev+0xc8): undefined reference to `operator delete(void*, unsigned long)'
[...]
So in the case of static libllvm we need to explicitly link bpftool with
required libraries, namely, libstdc++ and those provided by the `llvm-config
--system-libs` command. We can distinguish between the shared and static cases
by using the `llvm-config --shared-mode` command.
Fixes: eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221222102627.1643709-1-aspsk@isovalent.com
Remove the empty vmlinux.h if bpftool failed to dump btf info.
The empty vmlinux.h can hide real error when reading output
of make.
This is done by adding .DELETE_ON_ERROR special target in related
makefiles.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20221217223509.88254-3-changbin.du@gmail.com
strdup() allocates memory for path. We need to release the memory in the
following error path. Add free() to avoid memory leak.
Fixes: 8f184732b6 ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221206071906.806384-1-linmq006@gmail.com
The function contains a single btf__free() call which can be
inlined. Credits to Yonghong Song.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-6-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpftool is now totally compliant with libbpf 1.0 mode and is not
expected to be compiled with pre-1.0, let's clean-up the usage of
libbpf_get_error().
The changes stay aligned with returned errors always negative.
- In tools/bpf/bpftool/btf.c This fixes an uninitialized local
variable `err` in function do_dump() because it may now be returned
without having been set.
- This also removes the checks on NULL pointers before calling
btf__free() because that function already does the check.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Link: https://lore.kernel.org/r/20221120112515.38165-5-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is expected that errno be passed to strerror(). This also cleans
this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-4-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no reasons to keep PTR_ERR() when kern_btf=NULL, let's just
return 0.
This also cleans this part of code from using libbpf_get_error().
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com>
Acked-by: Yonghong Song <yhs@fb.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221120112515.38165-3-sahid.ferdjaoui@industrialdiscipline.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If the parameters for batch are more than 2, check argc first can
return immediately, no need to use is_prefix() to check "file" with
a little overhead and then check argc, it is better to check "file"
only when the parameters for batch are 2.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/1668517207-11822-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Y+/e
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-11-11
We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).
The main changes are:
1) Veristat tool improvements to support custom filtering, sorting, and replay
of results, from Andrii Nakryiko.
2) BPF verifier precision tracking fixes and improvements,
from Andrii Nakryiko.
3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
Donald Hunter, Maryam Tahhan, Bagas Sanjaya.
4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
Eduard Zingerman.
5) Fix veth driver panic if XDP program is attached before veth_open, from
John Fastabend.
6) BPF verifier clean ups and fixes in preparation for follow up features,
from Kumar Kartikeya Dwivedi.
7) Add access to hwtstamp field from BPF sockops programs,
from Martin KaFai Lau.
8) Various fixes for BPF selftests and samples, from Artem Savkov,
Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.
9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
Stanislav Fomichev.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
selftests/bpf: fix veristat's singular file-or-prog filter
selftests/bpf: Test skops->skb_hwtstamp
selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
bpf: Add hwtstamp field for the sockops prog
selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
bpf, docs: Document BPF_MAP_TYPE_ARRAY
docs/bpf: Document BPF map types QUEUE and STACK
docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
libbpf: Hashmap.h update to fix build issues using LLVM14
bpf: veth driver panics when xdp prog attached before veth_open
selftests: Fix test group SKIPPED result
selftests/bpf: Tests for btf_dedup_resolve_fwds
libbpf: Resolve unambigous forward declarations
libbpf: Hashmap interface update to allow both long and void* keys/values
samples/bpf: Fix sockex3 error: Missing BPF prog type
selftests/bpf: Fix u32 variable compared with less than zero
Documentation: bpf: Escape underscore in BPF type name prefix
selftests/bpf: Use consistent build-id type for liburandom_read.so
...
====================
Link: https://lore.kernel.org/r/20221111233733.1088228-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An update for libbpf's hashmap interface from void* -> void* to a
polymorphic one, allowing both long and void* keys and values.
This simplifies many use cases in libbpf as hashmaps there are mostly
integer to integer.
Perf copies hashmap implementation from libbpf and has to be
updated as well.
Changes to libbpf, selftests/bpf and perf are packed as a single
commit to avoid compilation issues with any future bisect.
Polymorphic interface is acheived by hiding hashmap interface
functions behind auxiliary macros that take care of necessary
type casts, for example:
#define hashmap_cast_ptr(p) \
({ \
_Static_assert((p) == NULL || sizeof(*(p)) == sizeof(long),\
#p " pointee should be a long-sized integer or a pointer"); \
(long *)(p); \
})
bool hashmap_find(const struct hashmap *map, long key, long *value);
#define hashmap__find(map, key, value) \
hashmap_find((map), (long)(key), hashmap_cast_ptr(value))
- hashmap__find macro casts key and value parameters to long
and long* respectively
- hashmap_cast_ptr ensures that value pointer points to a memory
of appropriate size.
This hack was suggested by Andrii Nakryiko in [1].
This is a follow up for [2].
[1] https://lore.kernel.org/bpf/CAEf4BzZ8KFneEJxFAaNCCFPGqp20hSpS2aCj76uRk3-qZUH5xg@mail.gmail.com/
[2] https://lore.kernel.org/bpf/af1facf9-7bc8-8a3d-0db4-7b3f333589a2@meta.com/T/#m65b28f1d6d969fcd318b556db6a3ad499a42607d
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221109142611.879983-2-eddyz87@gmail.com
When using bpftool to pin {PROG, MAP, LINK} without FILE,
segmentation fault will occur. The reson is that the lack
of FILE will cause strlen to trigger NULL pointer dereference.
The corresponding stacktrace is shown below:
do_pin
do_pin_any
do_pin_fd
mount_bpffs_for_pin
strlen(name) <- NULL pointer dereference
Fix it by adding validation to the common process.
Fixes: 75a1e792c3 ("tools: bpftool: Allow all prog/map handles for pinning objects")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20221102084034.3342995-1-pulehui@huaweicloud.com
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221026081645.3186878-1-colin.i.king@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add support for new cgroup local storage
Acked-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221026042901.674177-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to "libbfd", add a "llvm" feature to the output of command
"bpftool version" to indicate that LLVM is used for disassembling JIT-ed
programs. This feature is mutually exclusive (from Makefile definitions)
with "libbfd".
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221025150329.97371-9-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For offloaded BPF programs, instead of failing to create the
LLVM disassembler without even looking for a triple at all, do run the
function that attempts to retrieve a valid architecture name for the
device.
It will still fail for the LLVM disassembler, because currently we have
no valid triple to return (NFP disassembly is not supported by LLVM).
But failing in that function is more logical than to assume in
jit_disasm.c that passing an "arch" name is simply not supported.
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20221025150329.97371-8-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To disassemble instructions for JIT-ed programs, bpftool has relied on
the libbfd library. This has been problematic in the past: libbfd's
interface is not meant to be stable and has changed several times. For
building bpftool, we have to detect how the libbfd version on the system
behaves, which is why we have to handle features disassembler-four-args
and disassembler-init-styled in the Makefile. When it comes to shipping
bpftool, this has also caused issues with several distribution
maintainers unwilling to support the feature (see for example Debian's
page for binutils-dev, which ships libbfd: "Note that building Debian
packages which depend on the shared libbfd is Not Allowed." [0]).
For these reasons, we add support for LLVM as an alternative to libbfd
for disassembling instructions of JIT-ed programs. Thanks to the
preparation work in the previous commits, it's easy to add the library
by passing the relevant compilation options in the Makefile, and by
adding the functions for setting up the LLVM disassembler in file
jit_disasm.c.
The LLVM disassembler requires the LLVM development package (usually
llvm-dev or llvm-devel).
The expectation is that the interface for this disassembler will be more
stable. There is a note in LLVM's Developer Policy [1] stating that the
stability for the C API is "best effort" and not guaranteed, but at
least there is some effort to keep compatibility when possible (which
hasn't really been the case for libbfd so far). Furthermore, the Debian
page for the related LLVM package does not caution against linking to
the lib, as binutils-dev page does.
Naturally, the display of disassembled instructions comes with a few
minor differences. Here is a sample output with libbfd (already
supported before this patch):
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl 0x0(%rax,%rax,1)
5: xchg %ax,%ax
7: push %rbp
8: mov %rsp,%rbp
b: push %rbx
c: push %r13
e: push %r14
10: mov %rdi,%rbx
13: movzwq 0xb4(%rbx),%r13
1b: xor %r14d,%r14d
1e: or $0x2,%r14d
22: mov $0x1,%eax
27: cmp $0x2,%r14
2b: jne 0x000000000000002f
2d: xor %eax,%eax
2f: pop %r14
31: pop %r13
33: pop %rbx
34: leave
35: ret
LLVM supports several variants that we could set when initialising the
disassembler, for example with:
LLVMSetDisasmOptions(*ctx,
LLVMDisassembler_Option_AsmPrinterVariant);
but the default printer is used for now. Here is the output with LLVM:
# bpftool prog dump jited id 56
bpf_prog_6deef7357e7b4530:
0: nopl (%rax,%rax)
5: nop
7: pushq %rbp
8: movq %rsp, %rbp
b: pushq %rbx
c: pushq %r13
e: pushq %r14
10: movq %rdi, %rbx
13: movzwq 180(%rbx), %r13
1b: xorl %r14d, %r14d
1e: orl $2, %r14d
22: movl $1, %eax
27: cmpq $2, %r14
2b: jne 0x2f
2d: xorl %eax, %eax
2f: popq %r14
31: popq %r13
33: popq %rbx
34: leave
35: retq
The LLVM disassembler comes as the default choice, with libbfd as a
fall-back.
Of course, we could replace libbfd entirely and avoid supporting two
different libraries. One reason for keeping libbfd is that, right now,
it works well, we have all we need in terms of features detection in the
Makefile, so it provides a fallback for disassembling JIT-ed programs if
libbfd is installed but LLVM is not. The other motivation is that libbfd
supports nfp instruction for Netronome's SmartNICs and can be used to
disassemble offloaded programs, something that LLVM cannot do. If
libbfd's interface breaks again in the future, we might reconsider
keeping support for it.
[0] https://packages.debian.org/buster/binutils-dev
[1] https://llvm.org/docs/DeveloperPolicy.html#c-api-changes
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221025150329.97371-7-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor disasm_print_insn() to extract the code specific to libbfd and
move it to dedicated functions. There is no functional change. This is
in preparation for supporting an alternative library for disassembling
the instructions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-6-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Bpftool uses libbfd for disassembling JIT-ed programs. But the feature
is optional, and the tool can be compiled without libbfd support. The
Makefile sets the relevant variables accordingly. It also sets variables
related to libbfd's interface, given that it has changed over time.
Group all those libbfd-related definitions so that it's easier to
understand what we are testing for, and only use variables related to
libbfd's interface if we need libbfd in the first place.
In addition to make the Makefile clearer, grouping the definitions
related to disassembling JIT-ed programs will help support alternatives
to libbfd.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-5-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make FEATURE_TESTS and FEATURE_DISPLAY easier to read and less likely to
be subject to conflicts on updates by having one feature per line.
Suggested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-4-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The JIT disassembler in bpftool is the only components (with the JSON
writer) using asserts to check the return values of functions. But it
does not do so in a consistent way, and diasm_print_insn() returns no
value, although sometimes the operation failed.
Remove the asserts, and instead check the return values, print messages
on errors, and propagate the error to the caller from prog.c.
Remove the inclusion of assert.h from jit_disasm.c, and also from map.c
where it is unused.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
_GNU_SOURCE is defined in several source files for bpftool, but only one
of them takes the precaution of checking whether the value is already
defined. Add #ifndef for other occurrences too.
This is in preparation for the support of disassembling JIT-ed programs
with LLVM, with $(llvm-config --cflags) passing -D_GNU_SOURCE as a
compilation argument.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221025150329.97371-2-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Along with the version number, "bpftool version" displays a list of
features that were selected at compilation time for bpftool. It would be
useful to indicate in that list whether a binary is a bootstrap version
of bpftool. Given that an increasing number of components rely on
bootstrap versions for generating skeletons, this could help understand
what a binary is capable of if it has been copied outside of the usual
"bootstrap" directory.
To detect a bootstrap version, we simply rely on the absence of
implementation for the do_prog() function. To do this, we must move the
(unchanged) list of commands before do_version(), which in turn requires
renaming this "cmds" array to avoid shadowing it with the "cmds"
argument in cmd_select().
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221020100332.69563-1-quentin@isovalent.com
Commands "bpftool help" or "bpftool version" use argv[0] to display the
name of the binary. While it is a convenient way to retrieve the string,
it does not always produce the most readable output. For example,
because of the way bpftool is currently packaged on Ubuntu (using a
wrapper script), the command displays the absolute path for the binary:
$ bpftool version | head -n 1
/usr/lib/linux-tools/5.15.0-50-generic/bpftool v5.15.60
More generally, there is no apparent reason for keeping the whole path
and exact binary name in this output. If the user wants to understand
what binary is being called, there are other ways to do so. This commit
replaces argv[0] with "bpftool", to simply reflect what the tool is
called. This is aligned on what "ip" or "tc" do, for example.
As an additional benefit, this seems to help with integration with
Meson for packaging [0].
[0] https://github.com/NixOS/nixpkgs/pull/195934
Suggested-by: Vladimír Čunát <vladimir.cunat@nic.cz>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221020100300.69328-1-quentin@isovalent.com
strerror() expects a positive errno, however variable err will never be
positive when an error occurs. This causes bpftool to output too many
"unknown error", even a simple "file not exist" error can not get an
accurate message.
This patch fixed all "strerror(err)" patterns in bpftool.
Specially in btf.c#L823, hashmap__append() is an internal function of
libbpf and will not change errno, so there's a little difference.
Some libbpf_get_error() calls are kept for return values.
Changes since v1: https://lore.kernel.org/bpf/SY4P282MB1084B61CD8671DFA395AA8579D539@SY4P282MB1084.AUSP282.PROD.OUTLOOK.COM/
Check directly for NULL values instead of calling libbpf_get_error().
Signed-off-by: Tianyi Liu <i.pear@outlook.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/SY4P282MB1084AD9CD84A920F08DF83E29D549@SY4P282MB1084.AUSP282.PROD.OUTLOOK.COM
Florian Westphal