Remove the initialization of the variable "i" since it is written a few
lines later.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210801085155.3170-3-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy() but in
this case it is simpler to use the "%*ph" format specifier.
Moreover, with the "0x%02X " in the sprintf followed by the strcat, the
msg buffer (now removed) can print 128/5 values (25 hex values). So, the
"%*ph" replacement won't cut output earlier than requested since this
format specifier can print up to 64 bytes.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210801085155.3170-2-len.baker@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The custom ->reset() repeats the generic one, replace it.
Note, in newer kernels the context of the function is a sleeping one,
it's fine to switch over to the sleeping functions. Keeping the reset
line asserted longer than 20 microseconds is also okay, it's an idling
state of the hardware.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himax HX8347d has non-standard register to control orientation.
Add support for different orientation values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When requesting GPIO line the probe can be deferred.
In such case don't spam logs with an error message.
This can be achieved by switching to dev_err_probe().
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The infamous commit c440eee1a7 ("Staging: staging: fbtft: Switch to
the GPIO descriptor interface") broke GPIO handling completely.
It has already four commits to rectify and it seems not enough.
In order to fix the mess here we:
1) Set default to "inactive" for all requested pins
2) Fix CS#, RD#, and WR# pins polarity since it's active low
and GPIO descriptor interface takes it into consideration
from the Device Tree or ACPI
3) Consolidate chip activation (CS# assertion) under default
->reset() callback
To summarize the expectations about polarity for GPIOs:
RD# Low
WR# Low
CS# Low
RESET# Low
DC or RS High
RW High
Data 0 .. 15 High
See also Adafruit learning course [1] for the example of the schematics.
While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
[1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads
Fixes: 92e3e88488 ("Staging: fbtft: Fix GPIO handling")
Fixes: b918d1c270 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
Fixes: dbc4f989c8 ("Staging: fbtft: Fix probing of gpio descriptor")
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Jan Sebastian Götte <linux@jaseg.net>
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210503172114.27891-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For st7789v IC, when we need continuous full screen refresh, it is best to
wait for the tearing effect line signal to arrive to avoid screen tearing.
Signed-off-by: Carlis <zhangxuezhi1@yulong.com>
Link: https://lore.kernel.org/r/1612706517-124617-1-git-send-email-zhangxuezhi3@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently HSD20_IPS is defined as "true" and will always result in a
non-zero result even if it is defined as "false" because it is an array
and that will never be zero. Fix this by defining it as an integer 1
rather than a literal string.
Addessses-Coverity: ("Array compared against 0")
Fixes: f03c9b7884 ("staging: fbtft: fb_st7789v: Initialize the Display")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200521135038.345878-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An array index is being computed by mathematical calculation on the
Lvalue side of the expression. This also further results in the statement
exceeding 80 character statement length.
A local variable can store the value of the array index computation. The
variable can then be used as array index. This improves readability of
the code and also address 80 character warning raised by checkpatch.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/4bf407e1b3e05745f767b2bad6218c9fb836d869.1584314604.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple macro definitions crossing 80 character line length makes them
hard to understand. Reformatting the these lines makes the code more
readable and easier to understand. Issue flagged by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/b8d2fc0f55339830694ee51860cc970ce1b9cae4.1584314604.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A long variable name beyond 80 characters extends into the next
line. Reformatting the line makes it more readable. Also adding an extra
line for the next instruction following current if block helps
understand it better.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/027ccfa893feafc25da273b4b4de444d7a466cfd.1584314603.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When converting to device property API the commit
8b2d3aeeb7 ("fbtft: Make use of device property API")
mistakenly placed the reading of the first value inside the loop,
that jumps over value after initialization sequence or sleep commands.
Move the above mentioned reading outside of the loop to restore
correct behaviour.
Besides that, we are using pre-increment operation which may lead to
out of the boundary access at the end of sequence. Thus, allocate buffer
with an additional element at the end to prevent out of the boundary
access.
Fixes: 8b2d3aeeb7 ("fbtft: Make use of device property API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191121140207.65089-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current use of the mode flag SPI_CS_HIGH is fragile: it
overwrites anything already assigned by the SPI core.
Assign ^= SPI_CS_HIGH since we might be active high
already, and that is usually the case with GPIOs used
for chip select, even if they are in practice active low.
Add a comment clarifying why ^= SPI_CS_HIGH is the right
choice here.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191204233230.22309-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191120133911.13539-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of device property API in this driver so that both OF based
system and ACPI based system can use this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all there is no need to guard GPIO request by CONFIG_OF.
It works for everybody independently on resource provider. While here,
rename the function to reflect the above.
Moreover, since we have a global dependency to OF, the rest of
conditional compilation is no-op, i.e. it's always be true.
Due to above drop useless #ifdef CONFIG_OF and therefore dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel documentation script complains that some of the function parameters
are not described:
drivers/staging/fbtft/fbtft-core.c:543: warning: Function parameter or member 'pdata' not described in 'fbtft_framebuffer_alloc'
Describe function parameters where it's appropriate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New GCC warns about inappropriate use of strncpy():
drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’:
drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
665 | strncpy(info->fix.id, dev->driver->name, 16);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Later on the copy is being used with the assumption to be NULL terminated.
Make sure string is NULL terminated by switching to snprintf().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SEPS525 is a 160 RGB x 128 Dots, 262K Colors PM-OLED Display Driver and
Controller.
The controller can be found on the NHD-1.69-160128UGC3
(Newhaven Display International, Inc.).
Datasheets:
Link: https://www.newhavendisplay.com/appnotes/datasheets/OLEDs/SEPS525.pdf
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Co-developed-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Link: https://lore.kernel.org/r/20191017170203.11999-1-beniamin.bia@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the special case when fbtft_mkdirty() is called with with -1 for the y
coordinate, the height is truncated by 1.
This isn't required, and causes the last line to not update.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20191011112441.31003-1-alexandru.ardelean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.
Fixes: c296d5f995 ("staging: fbtft: core support")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
flexfb was an attempt to write a generic fbtft driver that was abandoned.
All the displays it supports are supported by other fbtft drivers.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-3-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed the gpio code from fbtft_device rendering it useless.
fbtft_device is a module that was used on the Raspberry Pi to dynamically
add fbtft devices when the Pi didn't have Device Tree support.
Just remove the module since it's the responsibility of Device Tree, ACPI
or platform code to add devices.
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-2-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed setting gpios via platform data. This means that
fbtft will now only work with Device Tree so set the dependency.
This also prevents a NULL pointer deref on non-DT platform because
fbtftops.request_gpios is not set in that case anymore.
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is related to 'pcd8544'.
However, 2 strings are about pdc8544 (c and d switched)
Fix it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725183856.17616-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor
interface") breaks GPIO handling. In several places, checks to only set
a GPIO if it was configured ended up backwards.
I have tested this fix. The fixed driver works with a ili9486
display connected to a raspberry pi via SPI.
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Tested-by: Jan Sebastian Götte <linux@jaseg.net>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Jan Sebastian Götte <linux@jaseg.net>
Link: https://lore.kernel.org/r/75ada52f-afa1-08bc-d0ce-966fc1110e70@jaseg.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Typically gpiod_set_value calls would assert the reset line and
then release it using the symantics of:
gpiod_set_value(par->gpio.reset, 0);
... delay
gpiod_set_value(par->gpio.reset, 1);
And the gpio binding would specify the polarity.
Prior to conversion to gpiod calls the polarity in the DT
was ignored and assumed to be active low. Fix it so that
DT polarity is respected.
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jan Sebastian Götte <linux@jaseg.net>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1563236677-5045-3-git-send-email-preid@electromag.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conversion to use gpio descriptors broke all gpio lookups as
devm_gpiod_get_index was converted to use dev->driver->name for
the gpio name lookup. Fix this by using the name param. In
addition gpiod_get post-fixes the -gpios to the name so that
shouldn't be included in the call. However this then breaks the
of_find_property call to see if the gpio entry exists as all
fbtft treats all gpios as optional. So use devm_gpiod_get_index_optional
instead which achieves the same thing and is simpler.
Nishad confirmed the changes where only ever compile tested.
Fixes: c440eee1a7 ("Staging: fbtft: Switch to the gpio descriptor interface")
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Jan Sebastian Götte <linux@jaseg.net>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1563236677-5045-2-git-send-email-preid@electromag.com.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Except for driver bugs (which we'll catch with a WARN_ON) this is only
to report failures of the new driver taking over the console. There's
nothing the outgoing driver can do about that, and no one ever
bothered to actually look at these return values. So remove them all.
v2: fixup unregister_framebuffer in savagefb, fbtft, ivtvfb, and neofb
drivers, reported by kbuild.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Peter Rosin <peda@axentia.se>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-19-daniel.vetter@ffwll.ch
There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Prefer using BIT and replace bit shifting with the BIT(x) macro.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Prefer using BIT and replace bit shifting with the BIT(x) macro.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert a ternary statement into a if statement which is detected while
resolving "WARNING: line over 80 characters". Use BIT() macro instead
manually left shifting.
Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added __printf attribute to declaration of fbtft_dbg_hex and fixed
mismatches between format-specifiers and arguments in several function
calls.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert a macro to an inline function to improve type safety and make
the code simpler.
Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line with over 80 characters to get rid of the warning
given by checkpatch
Signed-off-by: Daniela Mormocea <daniela.mormocea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl warning:
WARNING:line over 80 characters
Move Parameters to the next lines with proper alignment
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Len Baker