Kernel-doc markups should use this format:
identifier - description
There is a common comment marked, instead, with kernel-doc
notation.
Some identifiers have different names between their prototypes
and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/535182d6f55d7a7de293dda9676df68f5f60afc6.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().
static int soc_pcm_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ config_err:
| ...
| rtd_startup_err:
(A) ...
| component_err:
| ...
v return ret;
}
The difference is
soc_pcm_close() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_pcm_close() and rollback.
Now, soc_pcm_open/close() are handling
=> 1) snd_soc_dai_startup/shutdown()
2) snd_soc_link_startup/shutdown()
3) snd_soc_component_module_get/put()
4) snd_soc_component_open/close()
5) pm_runtime_put/get()
This patch is for 1) snd_soc_dai_startup/shutdown().
The idea of having bit-flag or counter is not enough for this purpose.
For example if one DAI is used for 2xPlaybacks for some reasons,
and if 1st Playback was succeeded but 2nd Playback was failed,
2nd Playback rollback doesn't need to call shutdown.
But it has succeeded bit-flag or counter via 1st Playback,
thus, 2nd Playback rollback will call unneeded shutdown.
And 1st Playback's necessary shutdown will not be called,
because bit-flag or counter was cleared by wrong 2nd Playback rollback.
To avoid such case, this patch marks substream pointer when startup() was
succeeded. If rollback needed, it will check rollback flag and marked
substream pointer.
One note here is that it cares *current* startup() only now.
but we might want to check *whole* marked substream in the future.
This patch is using macro named "push/pop", so that it can be easily
update.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfgubwoc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
runtime_usage of sound card has been observed to grow without bound.
For example:
$ cat /sys/devices/platform/sound/power/runtime_usage
46
$ sox -n -t s16 -r 48000 -c 2 - synth 1 sine 440 vol 0.1 | \
aplay -q -D hw:0,0 -f S16_LE -r 48000 -c 2
$ cat /sys/devices/platform/sound/power/runtime_usage
52
Commit 4e872a4682 ("ASoC: dapm: Don't force card bias level to be
updated") stops to force update bias_level on card. If card doesn't
provide set_bias_level callback, the snd_soc_dapm_set_bias_level()
is equivalent to NOP for card device.
As a result, dapm_pre_sequence_async() doesn't change the bias_level of
card device correctly. Thus, pm_runtime_get_sync() would be called in
dapm_pre_sequence_async() without symmetric pm_runtime_put() in
dapm_post_sequence_async().
Don't call pm_runtime_* on card device.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200724070731.451377-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-xxx are getting rtd from substream by
rtd = substream->private_data;
But, getting data from "private_data" is very unclear.
This patch adds asoc_substream_to_rtd() macro which is
easy to understand that rtd from substream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wo2z0yve.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We had read/write function for Codec, Platform, etc,
but these has been merged into snd_soc_component_read/write().
Internally, it is using regmap or driver function.
In read case, each styles are like below
regmap
ret = regmap_read(..., reg, &val);
driver function
val = xxx->read(..., reg);
Because of this kind of different style, to keep same read style,
when we merged each read function into snd_soc_component_read(),
we created snd_soc_component_read32(), like below.
commit 738b49efe6 ("ASoC: add snd_soc_component_read32")
(1) val = snd_soc_component_read32(component, reg);
(2) ret = snd_soc_component_read(component, reg, &val);
Many drivers are using snd_soc_component_read32(), and
some drivers are using snd_soc_component_read() today.
In generally, we don't check read function successes,
because, we will have many other issues at initial timing
if read function didn't work.
Now we can use soc_component_err() when error case.
This means, it is easy to notice if error occurred.
This patch aggressively merge snd_soc_component_read() and _read32(),
and makes snd_soc_component_read/write() as generally style.
This patch do
1) merge snd_soc_component_read() and snd_soc_component_read32()
2) it uses soc_component_err() when error case (easy to notice)
3) keeps read32 for now by #define
4) update snd_soc_component_read() for all drivers
Because _read() user drivers are not too many, this patch changes
all user drivers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/87sgev4mfl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnaozv2s.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Card related function should be implemented at soc-card now.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgfkzv4g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The newly added CODEC to CODEC DAI link widget pointers in
snd_soc_dai_link are better placed in snd_soc_pcm_runtime.
snd_soc_dai_link is really intended for static configuration of
the DAI, and the runtime for dynamic data. The snd_soc_dai_link
structures are not destroyed if the card is unbound. The widgets
are cleared up on unbind, however if the card is rebound as the
snd_soc_dai_link structures are reused these pointers will be left at
their old values, causing access to freed memory.
Fixes: 595571cca4 ("ASoC: dapm: Fix regression introducing multiple copies of DAI widgets")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200526161930.30759-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-dapm.c :: snd_soc_dai_link_event_pre_pmu() / snd_soc_dai_link_event()
are directly updating dai->active without caring about
stream_active / component->active.
It is breaking xxx_active count balance.
This patch uses snd_soc_dai_action() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878shu6n4n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the error message into snd_soc_dapm_new_dai from
dapm_connect_dai_pair, since the two copies are almost identical and
are the only callers.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactoring was done to factor out the linking of DAI widgets into
a helper function, dapm_add_valid_dai_widget. However when this was
done, a regression was introduced for CODEC to CODEC links. It was
over looked that the playback and capture variables persisted across
all CODEC DAIs being processed, which ensured that the special DAI
widget that is added for CODEC to CODEC links was only created once.
This bug causes kernel panics during DAPM shutdown.
To stick with the spirit of the original refactoring whilst fixing the
issue, variables to hold the DAI widgets are added to snd_soc_dai_link.
Furthermore the dapm_add_valid_dai_widget function is renamed to
dapm_connect_dai_pair, the function only adds DAI widgets in the CODEC
to CODEC case and its primary job is to add routes connecting two DAI
widgets, making the original name quite misleading.
Fixes: 6c4b13b51a ("ASoC: Add dapm_add_valid_dai_widget helper")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200409181209.30130-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv2ooley.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This makes DPCM runtime update functions available for external
calling. As an example, virtualised ASoC component drivers may need
to call these when managing shared DAPM routes that are used by more
than one driver (i.e. when host driver and guest drivers have a DAPM
path from guest PCM to host DAI where some parts are owned by host
driver and others by guest driver).
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312095214.15126-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_widgets() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1y2goga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_dapms() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgiigogf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dapm_stream_event() is using for_each_rtd_cpu_dais().
It should use "cpu_dai", instead of "rtd->cpu_dai".
This patch fixup it.
Fixes: commit de6214a336 ("ASoC: Add multiple CPU DAI support in DAPM")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pne07qeh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c2caa4da46 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13d
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.
As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.
Fixes: 39eb5fd13d ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM handles DAIs during soc_dapm_stream_event() and during addition
and creation of DAI widgets i.e., dapm_add_valid_dai_widget() and
dapm_connect_dai_link_widgets().
Extend these functions to handle multiple cpu dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200225133917.21314-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding a helper to connect widget for a specific cpu and codec dai
The helper will help dapm_connect_dai_link_widgets() to reduce indents.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200225133917.21314-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_path_put() (A) is calling kfree(*list).
The freed list is created by dapm_widget_list_create() (B) which is called
from snd_soc_dapm_dai_get_connected_widgets() (C) which is called from
dpcm_path_get() (D).
(B) dapm_widget_list_create(**list, ...)
{
...
=> *list = kzalloc();
...
}
(C) snd_soc_dapm_dai_get_connected_widgets(..., **list, ...)
{
...
dapm_widget_list_create(list, ...);
...
}
(D) dpcm_path_get(..., **list)
{
...
snd_soc_dapm_dai_get_connected_widgets(..., list, ...);
...
}
(A) dpcm_path_put(**list)
{
=> kfree(*list);
}
This kind of unbalance code is very difficult to read/understand.
To avoid this issue, this patch adds each missing paired function
dapm_widget_list_free() for dapm_widget_list_create() (B), and
snd_soc_dapm_dai_free_widgets() for snd_soc_dapm_dai_get_connected_widgets() (C).
This patch uses these, and moves dpcm_path_put() next to dpcm_path_get().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a75fjc9q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has dai_get_widget(), but it can be more generic.
This patch renames it to snd_soc_dai_get_widget(), and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d0abjca1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PCM runtime was freed during PMU in the case that the event hook
encountered an error. However, it is also unconditionally freed during
PMD. Avoid a double-free by dropping the call to kfree in the PMU hook.
Fixes: a72706ed82 ("ASoC: codec2codec: remove ephemeral variables")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds new for_each_dapm_widgets() macro and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878slbceyg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we stop stream, if it was Playback, we might need to care
about power down time. In such case, we need to use delayed work.
We have same implementation for it at soc-pcm.c and soc-compress.c,
but we don't want to have duplicate code.
This patch adds snd_soc_dapm_stream_stop(), and share same code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rs8t4uw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc-dapm has snd_soc_dapm_free() which cleanups debugfs, widgets, list.
But, there is no paired initialize function.
This patch adds snd_soc_dapm_init() and initilaizing dapm
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnkw7lbj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By resetting the cached number of endpoints for all card's widgets we may
overwrite previously cached values for other streams. The situation may
happen especially when running streams simultaneously.
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@linux.intel.com>
Link: https://lore.kernel.org/r/20190809084034.26220-1-szymonx.mielczarek@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.set_bias_level.
if (driver->set_bias_level)
dapm->set_bias_level = ...;
...
if (dapm->set_bias_level)
ret = dapm->set_bias_level(...);
We can directly call it via driver->set_bias_level.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_set_bias_level() to soc-component.c
and updates parameters.
dapm->set_bias_level is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvb94d0n.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.stream_event.
if (driver->stream_event)
dapm->stream_event = ...;
...
if (dapm->stream_event)
ret = dapm->stream_event(...);
We can directly call it via driver->stream_event.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_stream_event() to soc-component.c
and updates parameters.
dapm->stream_event is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9vp4d0r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current soc-dapm / soc-core are using a long way round to call
.seq_notifier.
if (driver->seq_notifier)
dapm->seq_notifier = ...;
...
if (dapm->seq_notifier)
ret = dapm->seq_notifier(...);
We can directly call it via driver->seq_notifier.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.
This patch moves snd_soc_component_seq_notifier() to soc-component.c,
and updates parameters.
dapm->seq_notifier is no longer needed
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wog54d0v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, there is no need to store the individual debugfs file name, just
remove the whole directory all at once, saving a local variable.
Note, the soc-pcm "state" file has now moved to a subdirectory, as it is
only a good idea to save the dentries for debugfs directories, not
individual files, as the individual file debugfs functions are changing
to not return a dentry.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190731131716.9764-2-gregkh@linuxfoundation.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the information provided struct snd_soc_pcm_stream in the
struct snd_pcm_runtime of the codec to codec link.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-7-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that codec to codec links struct snd_soc_pcm_runtime have lasting pcm
and substreams, let's use them. Alsa allocate and keep the
struct snd_pcm_runtime as long as the link is powered.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-6-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently in function snd_soc_dai_link_event_pre_pmu the error return
code in variable err is being set but this is not actually being returned,
the function just returns zero even when there are failures. Fix this by
returning the error return code.
Addresses-Coverity: ("Unused value")
Fixes: 3dcfb397da ("ASoC: codec2codec: deal with params when necessary")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190726123327.10467-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is an event on codec to codec dai_link, we only need to deal
with params if the event is SND_SOC_DAPM_PRE_PMU, when .hw_params() is
called. For the other events, it is useless.
Also, dealing with the codec to codec params just before calling
.hw_params() callbacks give change to either party on the link to alter
params content in .startup(), which might be useful in some cases
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, codec to codec dai link widgets are named after the
cpu dai and the 1st codec valid on the link. This might be confusing
if there is multiple valid codecs on the link for one stream
direction.
Instead, use the dai link name and the stream direction to name the
the dai link widget
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When handling dai_link events on codec to codec links, run all .startup()
callbacks on sinks and sources before running any .hw_params(). Same goes
for hw_free() and shutdown(). This is closer to the behavior of regular
dai links
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mauro Carvalho Chehab