All the operands should be tagged `const`.
We're only assigning them to variables so that we can compare them (e.g.
check if left == right, etc.) and avoid evaluating expressions multiple
times.
There's no need for them to be mutable.
Also rename the helper variable `loc` to `__loc` like we do with
`__assertion` and `__strs` to avoid potential name collisions with user
code.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the compiler doesn't optimize them away, each kunit assertion (use of
KUNIT_EXPECT_EQ, etc.) can use 88 bytes of stack space in the worst and
most common case. This has led to compiler warnings and a suggestion
from Linus to move data from the structs into static const's where
possible [1].
This builds upon [2] which did so for the base struct kunit_assert type.
That only reduced sizeof(struct kunit_binary_assert) from 88 to 64.
Given these are by far the most commonly used asserts, this patch
factors out the textual representations of the operands and comparator
into another static const, saving 16 more bytes.
In detail, KUNIT_EXPECT_EQ(test, 2 + 2, 5) yields the following struct
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.operation = "==",
.left_text = "2 + 2",
.left_value = 4,
.right_text = "5",
.right_value = 5,
}
After this change
static const struct kunit_binary_assert_text __text = {
.operation = "==",
.left_text = "2 + 2",
.right_text = "5",
};
(struct kunit_binary_assert) {
.assert = <struct kunit_assert>,
.text = &__text,
.left_value = 4,
.right_value = 5,
}
This also DRYs the code a bit more since these str fields were repeated
for the string and pointer versions of kunit_binary_assert.
Note: we could name the kunit_binary_assert_text fields left/right
instead of left_text/right_text. But that would require changing the
macros a bit since they have args called "left" and "right" which would
be substituted in `.left = #left` as `.2 + 2 = \"2 + 2\"`.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
[2] https://lore.kernel.org/linux-kselftest/20220113165931.451305-6-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently have 2 other versions of KUNIT_INIT_BINARY_ASSERT_STRUCT.
The only differences are that
* the format funcition they pass is different
* the types of left_val/right_val should be different (integral,
pointer, string).
The latter doesn't actually matter since these macros are just plumbing
them along to KUNIT_ASSERTION where they will get type checked.
So combine them all into a single KUNIT_INIT_BINARY_ASSERT_STRUCT that
now also takes the format function as a parameter.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The concern is that having a lot of redundant fields in kunit_assert can
blow up stack usage if the compiler doesn't optimize them away [1].
The comment on this field implies that it was meant to be initialized
when the expect/assert was declared, but this only happens when we run
kunit_do_failed_assertion().
We don't need to access it outside of that function, so move it out of
the struct and make it a local variable there.
This change also takes the chance to reduce the number of macros by
inlining the now simplified KUNIT_INIT_ASSERT_STRUCT() macro.
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_BINARY_PTR_ASSERTION to match KUNIT_BINARY_INT_ASSERTION
and make KUNIT_EXPECT_EQ and KUNIT_EXPECT_PTREQ use these instead of
shared intermediate macros that only remove the need to type "==" or
"!=".
The current macro chain looks like:
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION => KUNIT_BASE_EQ_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_PTR_EQ_MSG => KUNIT_BINARY_PTR_EQ_MSG_ASSERTION => KUNIT_BASE_EQ_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
<ditto for NE and ASSERT>
After this change:
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_PTR_EQ_MSG => KUNIT_BINARY_PTR_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce a KUNIT_BINARY_INT_ASSERTION for the likes of KUNIT_EXPECT_LT.
This is analagous to KUNIT_BINARY_STR_ASSERTION.
Note: this patch leaves the EQ/NE macros untouched since those share
some intermediate macros for the pointer-based macros.
The current macro chain looks like:
KUNIT_EXPECT_LT_MSG => KUNIT_BASE_LT_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_GT_MSG => KUNIT_BASE_GT_MSG_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
<ditto for LE, GE, and ASSERT variants>
After this change:
KUNIT_EXPECT_LT_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
KUNIT_EXPECT_GT_MSG => KUNIT_BINARY_INT_ASSERTION => KUNIT_BASE_BINARY_ASSERTION
I.e. we've traded all the unique intermediary macros for a single shared
KUNIT_BINARY_INT_ASSERTION. The only difference is that users of
KUNIT_BINARY_INT_ASSERTION also need to pass the operation (==, <, etc.).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current macro chain looks like:
KUNIT_EXPECT_STREQ => KUNIT_EXPECT_STREQ_MSG => KUNIT_BINARY_STR_EQ_MSG_ASSERTION => KUNIT_BINARY_STR_ASSERTION.
KUNIT_ASSERT_STREQ => KUNIT_ASSERT_STREQ_MSG => KUNIT_BINARY_STR_EQ_MSG_ASSERTION => KUNIT_BINARY_STR_ASSERTION.
<ditto for STR_NE>
After this change:
KUNIT_EXPECT_STREQ => KUNIT_EXPECT_STREQ_MSG => KUNIT_BINARY_STR_ASSERTION.
KUNIT_ASSERT_STREQ => KUNIT_ASSERT_STREQ_MSG => KUNIT_BINARY_STR_ASSERTION.
<ditto for STR_NE>
All the intermediate macro did was pass in "==" or "!=", so it seems
better to just drop them at the cost of a bit more copy-paste.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We have the intermediate macros for KUNIT_EXPECT_PTR_GT() and friends,
but these macros don't exist.
I can see niche usecases for these macros existing, but since we've been
fine without them for so long, let's drop this dead code.
Users can instead cast the pointers and use the other GT/LT macros.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There's quite a few macros in play for KUnit assertions.
The current macro chain looks like:
KUNIT_EXPECT_EQ => KUNIT_BINARY_EQ_ASSERTION => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ => KUNIT_BINARY_EQ_ASSERTION => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
After this change:
KUNIT_EXPECT_EQ => KUNIT_EXPECT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
KUNIT_ASSERT_EQ => KUNIT_ASSERT_EQ_MSG => KUNIT_BINARY_EQ_MSG_ASSERTION
and we can drop the intermediate KUNIT_BINARY_EQ_ASSERTION.
This change does this for all the other macros as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This field has been split out from kunit_assert to make the struct less
heavy along with the filename and line number.
This change drops the assert_type field and cleans up all the macros
that were plumbing assert_type into kunit_assert.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is per Linus's suggestion in [1].
The issue there is that every KUNIT_EXPECT/KUNIT_ASSERT puts a
kunit_assert object onto the stack. Normally we rely on compilers to
elide this, but when that doesn't work out, this blows up the stack
usage of kunit test functions.
We can move some data off the stack by making it static.
This change introduces a new `struct kunit_loc` to hold the file and
line number and then just passing assert_type (EXPECT or ASSERT) as an
argument.
In [1], it was suggested to also move out the format string as well, but
users could theoretically craft a format string at runtime, so we can't.
This change leaves a copy of `assert_type` in kunit_assert for now
because cleaning up all the macros to not pass it around is a bit more
involved.
Here's an example of the expanded code for KUNIT_FAIL():
if (__builtin_expect(!!(!(false)), 0)) {
static const struct kunit_loc loc = { .file = ... };
struct kunit_fail_assert __assertion = { .assert = { .type ... };
kunit_do_failed_assertion(test, &loc, KUNIT_EXPECTATION, &__assertion.assert, ...);
};
[1] https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/VULQg1z6BAAJ
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The `struct kunit* test` field in kunit_assert is unused.
Note: string_stream needs it, but it has its own `test` field. I assume
`test` in `kunit_assert` predates this and was leftover after some
refactoring.
This patch removes the field and cleans up the macros to avoid
needlessly passing around `test`.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the code always calls kunit_do_assertion() even though it does
nothing when `pass` is true.
This change moves the `if(!(pass))` check into the macro instead
and renames the function to kunit_do_failed_assertion().
I feel this a bit easier to read and understand.
This has the potential upside of avoiding a function call that does
nothing most of the time (assuming your tests are passing) but comes
with the downside of generating a bit more code and branches. We try to
mitigate the branches by tagging them with `unlikely()`.
This also means we don't have to initialize structs that we don't need,
which will become a tiny bit more expensive if we switch over to using
static variables to try and reduce stack usage. (There's runtime code
to check if the variable has been initialized yet or not).
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Link: https://lkml.kernel.org/r/20211213204441.56204-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Link: https://lkml.kernel.org/r/20211013170417.87909-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7122debb43 ("kunit: introduce
kunit_kmalloc_array/kunit_kcalloc() helpers") added new functions but
called last arg `flags`, unlike the existing code that used `gfp`.
This only is an issue in test.h, test.c still used `gfp`.
But the documentation was copy-pasted with the old names, leading to
kernel-doc warnings.
Do s/flags/gfp to make the names consistent and fix the warnings.
Fixes: 7122debb43 ("kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This KUnit update for Linux 5.14-rc1 consists of fixes and features:
-- add support for skipped tests
-- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
-- add gnu_printf specifiers
-- add kunit_shutdown
-- add unit test for filtering suites by names
-- convert lib/test_list_sort.c to use KUnit
-- code organization moving default config to tools/testing/kunit
-- refactor of internal parser input handling
-- cleanups and updates to documentation
-- code cleanup related to casts
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmDfNHgACgkQCwJExA0N
QxzU5g/+ORbcbE5jhumo82xYUCGTScgIqPllNO000Vk9xydMqwx6tpY5puV0ig2z
5X7pxKEQTnype58yzY5mS1p336ryIx3q+AwEownxTW3YurXo2naQ59ZPjEvlAV+E
h+DMYLzEjrxzcyJATw02uC9YLUZ3w6FPJfiXViIv93YYrtcnM0u6JpwG0yfBlI4v
4KKB2Xu4K7T90C9/ADFYFKX3mjXQl5fQwvIdtA7wS90Cgq52LKp2mvg1XEiZE5d+
0dkTZ4Zo8TxxHt665o7vfnUjQQNmh45iGlW65wONxfAPb8BPoneGjVKWQTnN0Hor
W+93ZPbMuFMSSKJuoHY9U7sP5VySKvaiIYaGdi6prnZZu0zUabKnLZ6FOy7kEdfs
v09ulCBTVLslixVgNcp/kD9T+G/SXwCF5YBMAiMDQ0GNfUqlFtBkEA3gd44KwMI0
KwCcOgUSiaCkqyzOz/VeQsu/nhA5jdMO0KjiAs7Z3e7r7O/qKFs/ll7hZgDNCWSC
q8eIrcBkSL0EGgXR1iZ4AtGm8op6KKd4ACBM8NdtTyoGFl1npZOgZnHoIsy35G9K
9mhc7eXSoaDGqy9dONL1Tc8Neg7qLTXQNp2radqsnAAgNPUrJuC7+8YC+DdIsjBH
W7OyMjpfbwPws5rP4CS+JdwL+nQprKXZvFIhWGYhkDK44MbOngw=
=5QAv
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
"Fixes and features:
- add support for skipped tests
- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
- add gnu_printf specifiers
- add kunit_shutdown
- add unit test for filtering suites by names
- convert lib/test_list_sort.c to use KUnit
- code organization moving default config to tools/testing/kunit
- refactor of internal parser input handling
- cleanups and updates to documentation
- code cleanup related to casts"
* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
kunit: add unit test for filtering suites by names
kasan: test: make use of kunit_skip()
kunit: test: Add example tests which are always skipped
kunit: tool: Support skipped tests in kunit_tool
kunit: Support skipped tests
thunderbolt: test: Reinstate a few casts of bitfields
kunit: tool: internal refactor of parser input handling
lib/test: convert lib/test_list_sort.c to use KUnit
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
kunit: Remove the unused all_tests.config
kunit: Move default config from arch/um -> tools/testing/kunit
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
kunit: Add gnu_printf specifiers
lib/cmdline_kunit: Remove a cast which are no-longer required
kernel/sysctl-test: Remove some casts which are no-longer required
thunderbolt: test: Remove some casts which are no longer required
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
iio: Remove a cast in iio-test-format which is no longer required
device property: Remove some casts in property-entry-test
Documentation: kunit: Clean up some string casts in examples
...
The upcoming SLUB kunit test will be calling kunit_find_named_resource()
from a context with disabled interrupts. That means kunit's test->lock
needs to be IRQ safe to avoid potential deadlocks and lockdep splats.
This patch therefore changes the test->lock usage to spin_lock_irqsave()
and spin_unlock_irqrestore().
Link: https://lkml.kernel.org/r/20210511150734.3492-1-glittao@gmail.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Marco Elver <elver@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kunit_mark_skipped() macro marks the current test as "skipped", with
the provided reason. The kunit_skip() macro will mark the test as
skipped, and abort the test.
The TAP specification supports this "SKIP directive" as a comment after
the "ok" / "not ok" for a test. See the "Directives" section of the TAP
spec for details:
https://testanything.org/tap-specification.html#directives
The 'success' field for KUnit tests is replaced with a kunit_status
enum, which can be SUCCESS, FAILURE, or SKIPPED, combined with a
'status_comment' containing information on why a test was skipped.
A new 'kunit_status' test suite is added to test this.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add in:
* kunit_kmalloc_array() and wire up kunit_kmalloc() to be a special
case of it.
* kunit_kcalloc() for symmetry with kunit_kzalloc()
This should using KUnit more natural by making it more similar to the
existing *alloc() APIs.
And while we shouldn't necessarily be writing unit tests where overflow
should be a concern, it can't hurt to be safe.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some KUnit functions use variable arguments to implement a printf-like
format string. Use the __printf() attribute to let the compiler warn if
invalid format strings are passed in.
If the kernel is build with W=1, it complained about the lack of these
specifiers, e.g.:
../lib/kunit/test.c:72:2: warning: function ‘kunit_log_append’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the KUNIT_EXPECT_STREQ() and related macros assign both
string arguments to variables of their own type (via typeof()). This
seems to be to prevent the macro argument from being evaluated multiple
times.
However, this doesn't work if one of these is a fixed-length character
array, rather than a character pointer, as (for example) char[16] will
always allocate a new string.
By always using 'const char*' (the type strcmp expects), we're always
just taking a pointer to the string, which works even with character
arrays.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The use of typecheck() in KUNIT_EXPECT_EQ() and friends is causing more
problems than I think it's worth. Things like enums need to have their
values explicitly cast, and literals all need to be very precisely
typed, else a large warning will be printed.
While typechecking does have its uses, the additional overhead of having
lots of needless casts -- combined with the awkward error messages which
don't mention which types are involved -- makes tests less readable and
more difficult to write.
By removing the typecheck() call, the two arguments still need to be of
compatible types, but don't need to be of exactly the same time, which
seems a less confusing and more useful compromise.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When CONFIG_KUNIT is not enabled, __kunit_fail_current_test() an empty
static function.
But GCC complains about unused static functions, *unless* they're static
inline. So add inline to make GCC happy.
Fixes: 359a376081 ("kunit: support failure from dynamic analysis tools")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a kunit_fail_current_test() function to fail the currently running
test, if any, with an error message.
This is largely intended for dynamic analysis tools like UBSAN and for
fakes.
E.g. say I had a fake ops struct for testing and I wanted my `free`
function to complain if it was called with an invalid argument, or
caught a double-free. Most return void and have no normal means of
signalling failure (e.g. super_operations, iommu_ops, etc.).
Key points:
* Always update current->kunit_test so anyone can use it.
* commit 83c4e7a036 ("KUnit: KASAN Integration") only updated it for
CONFIG_KASAN=y
* Create a new header <kunit/test-bug.h> so non-test code doesn't have
to include all of <kunit/test.h> (e.g. lib/ubsan.c)
* Forward the file and line number to make it easier to track down
failures
* Declare the helper function for nice __printf() warnings about mismatched
format strings even when KUnit is not enabled.
Example output from kunit_fail_current_test("message"):
[15:19:34] [FAILED] example_simple_test
[15:19:34] # example_simple_test: initializing
[15:19:34] # example_simple_test: lib/kunit/kunit-example-test.c:24: message
[15:19:34] not ok 1 - example_simple_test
Fixed minor check patch with checkpatch --fix option:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Implementation of support for parameterized testing in KUnit. This
approach requires the creation of a test case using the
KUNIT_CASE_PARAM() macro that accepts a generator function as input.
This generator function should return the next parameter given the
previous parameter in parameterized tests. It also provides a macro to
generate common-case generators based on arrays. Generators may also
optionally provide a human-readable description of parameters, which is
displayed where available.
Note, currently the result of each parameter run is displayed in
diagnostic lines, and only the overall test case output summarizes
TAP-compliant success or failure of all parameter runs. In future, when
supported by kunit-tool, these can be turned into subsubtest outputs.
Signed-off-by: Arpitha Raghunandan <98.arpi@gmail.com>
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the following expectation
KUNIT_EXPECT_STREQ(test, "hi", "bye");
will produce:
Expected "hi" == "bye", but
"hi" == 1625079497
"bye" == 1625079500
After this patch:
Expected "hi" == "bye", but
"hi" == hi
"bye" == bye
KUNIT_INIT_BINARY_STR_ASSERT_STRUCT() was written but just mistakenly
not actually used by KUNIT_EXPECT_STREQ() and friends.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
test.h still produce three warnings:
include/kunit/test.h:282: warning: Function parameter or member '__suites' not described in 'kunit_test_suites_for_module'
include/kunit/test.h:282: warning: Excess function parameter 'suites_list' description in 'kunit_test_suites_for_module'
include/kunit/test.h:314: warning: Excess function parameter 'suites' description in 'kunit_test_suites'
They're all due to errors at kernel-doc markups. Update them.
It should be noticed that this patch moved a kernel-doc
markup that were located at the wrong place, and using a wrong
name. Kernel-doc only supports kaving the markup just before the
function/macro declaration. Placing it elsewhere will make it do
wrong assumptions.
Fixes: aac35468ca ("kunit: test: create a single centralized executor for all tests")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This Kunit update for Linux 5.10-rc1 consists of:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test suites.
This patch is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how kunit_test_suite()
works.
- add test plan to KUnit TAP format
-----BEGIN PGP SIGNATURE-----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=0Sco
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test
suites.
This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.
- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
As warned by:
./include/kunit/test.h:504: WARNING: Block quote ends without a blank line; unexpected unindent.
The right way to describe a function is:
name - description
Instead, kunit_remove_resource was using:
name: description
Causing it to be improperly parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some warnings there:
./include/kunit/test.h:90: warning: Function parameter or member 'name' not described in 'kunit_resource'
./include/kunit/test.h:353: warning: Function parameter or member 'res' not described in 'kunit_add_resource'
./include/kunit/test.h:367: warning: Function parameter or member 'res' not described in 'kunit_add_named_resource'
./include/kunit/test.h:367: warning: Function parameter or member 'name' not described in 'kunit_add_named_resource'
./include/kunit/test.h:367: warning: Function parameter or member 'data' not described in 'kunit_add_named_resource'
./include/kunit/test.h:367: warning: Excess function parameter 'name_data' description in 'kunit_add_named_resource'
Address them, ensuring that all non-private arguments will
be properly described. With that regards, at struct kunit_resource,
the free argument is described as user-provided. So, this
doesn't seem to belong to the "private" part of the struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Integrate KASAN into KUnit testing framework.
- Fail tests when KASAN reports an error that is not expected
- Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
tests
- Expected KASAN reports pass tests and are still printed when run
without kunit_tool (kunit_tool still bypasses the report due to the
test passing)
- KUnit struct in current task used to keep track of the current
test from KASAN code
Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]
- A named resource is added to a test when a KASAN report is
expected
- This resource contains a struct for kasan_data containing
booleans representing if a KASAN report is expected and if a
KASAN report is found
[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although we have not seen any actual examples where KUnit doesn't work
because it runs in the late init phase of the kernel, it has been a
concern for some time that this could potentially be an issue in the
future. So, remove KUnit from init calls entirely, instead call directly
from kernel_init() so that KUnit runs after late init.
Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Co-developed-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Co-developed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit resources API allows for custom initialization and
cleanup code (init/fini); here a new resource add function sets
the "struct kunit_resource" "name" field, and calls the standard
add function. Having a simple way to name resources is
useful in cases such as multithreaded tests where a set of
resources are shared among threads; a pointer to the
"struct kunit *" test state then is all that is needed to
retrieve and use named resources. Support is provided to add,
find and destroy named resources; the latter two are simply
wrappers that use a "match-by-name" callback.
If an attempt to add a resource with a name that already exists
is made kunit_add_named_resource() will return -EEXIST.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In its original form, the kunit resources API - consisting the
struct kunit_resource and associated functions - was focused on
adding allocated resources during test operation that would be
automatically cleaned up on test completion.
The recent RFC patch proposing converting KASAN tests to KUnit [1]
showed another potential model - where outside of test context,
but with a pointer to the test state, we wish to access/update
test-related data, but expressly want to avoid allocations.
It turns out we can generalize the kunit_resource to support
static resources where the struct kunit_resource * is passed
in and initialized for us. As part of this work, we also
change the "allocation" field to the more general "data" name,
as instead of associating an allocation, we can associate a
pointer to static data. Static data is distinguished by a NULL
free functions. A test is added to cover using kunit_add_resource()
with a static resource and data.
Finally we also make use of the kernel's krefcount interfaces
to manage reference counting of KUnit resources. The motivation
for this is simple; if we have kernel threads accessing and
using resources (say via kunit_find_resource()) we need to
ensure we do not remove said resources (or indeed free them
if they were dynamically allocated) until the reference count
reaches zero. A new function - kunit_put_resource() - is
added to handle this, and it should be called after a
thread using kunit_find_resource() is finished with the
retrieved resource.
We ensure that the functions needed to look up, use and
drop reference count are "static inline"-defined so that
they can be used by builtin code as well as modules in
the case that KUnit is built as a module.
A cosmetic change here also; I've tried moving to
kunit_[action]_resource() as the format of function names
for consistency and readability.
[1] https://lkml.org/lkml/2020/2/26/1286
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix warnings at 'make htmldocs', and formatting issues in the resulting
documentation.
- test.h: Fix annotation in kernel-doc parameter description.
- Documentation/*.rst: Fixing formatting issues, and a duplicate label
issue due to usage of sphinx.ext.autosectionlabel and identical labels
within one document (sphinx warning)
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space
indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to
8-space indentation in line with TAP spec (e.g. see "Subtests"
section of https://node-tap.org/tap-protocol/).
Use these macros in place of one or two tabs in strings to clarify
why we are indenting.
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
add debugfs support for displaying kunit test suite results; this is
especially useful for module-loaded tests to allow disentangling of
test result display from other dmesg events. debugfs support is
provided if CONFIG_KUNIT_DEBUGFS=y.
As well as printk()ing messages, we append them to a per-test log.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As tests are added to kunit, it will become less feasible to execute
all built tests together. By supporting modular tests we provide
a simple way to do selective execution on a running system; specifying
CONFIG_KUNIT=y
CONFIG_KUNIT_EXAMPLE_TEST=m
...means we can simply "insmod example-test.ko" to run the tests.
To achieve this we need to do the following:
o export the required symbols in kunit
o string-stream tests utilize non-exported symbols so for now we skip
building them when CONFIG_KUNIT_TEST=m.
o drivers/base/power/qos-test.c contains a few unexported interface
references, namely freq_qos_read_value() and freq_constraints_init().
Both of these could be potentially defined as static inline functions
in include/linux/pm_qos.h, but for now we simply avoid supporting
module build for that test suite.
o support a new way of declaring test suites. Because a module cannot
do multiple late_initcall()s, we provide a kunit_test_suites() macro
to declare multiple suites within the same module at once.
o some test module names would have been too general ("test-test"
and "example-test" for kunit tests, "inode-test" for ext4 tests);
rename these as appropriate ("kunit-test", "kunit-example-test"
and "ext4-inode-test" respectively).
Also define kunit_test_suite() via kunit_test_suites()
as callers in other trees may need the old definition.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 bits
Acked-by: David Gow <davidgow@google.com> # For list-test
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Define function as static inline in try-catch-impl.h to allow it to
be used in kunit itself and tests. Also remove unused
kunit_generic_try_catch
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously KUnit assumed that printk would always be present, which is
not a valid assumption to make. Fix that by removing call to
vprintk_emit, and calling printk directly.
This fixes a build error[1] reported by Randy.
For context this change comes after much discussion. My first stab[2] at
this was just to make the KUnit logging code compile out; however, it
was agreed that if we were going to use vprintk_emit, then vprintk_emit
should provide a no-op stub, which lead to my second attempt[3]. In
response to me trying to stub out vprintk_emit, Sergey Senozhatsky
suggested a way for me to remove our usage of vprintk_emit, which led to
my third attempt at solving this[4].
In my third version of this patch[4], I completely removed vprintk_emit,
as suggested by Sergey; however, there was a bit of debate over whether
Sergey's solution was the best. The debate arose due to Sergey's version
resulting in a checkpatch warning, which resulted in a debate over
correct printk usage. Joe Perches offered an alternative fix which was
somewhat less far reaching than what Sergey had suggested and
importantly relied on continuing to use %pV. Much of the debated
centered around whether %pV should be widely used, and whether Sergey's
version would result in object size bloat. Ultimately, we decided to go
with Sergey's version.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link[1]: https://lore.kernel.org/linux-kselftest/c7229254-0d90-d90e-f3df-5b6d6fc0b51f@infradead.org/
Link[2]: https://lore.kernel.org/linux-kselftest/20190827174932.44177-1-brendanhiggins@google.com/
Link[3]: https://lore.kernel.org/linux-kselftest/20190827234835.234473-1-brendanhiggins@google.com/
Link[4]: https://lore.kernel.org/linux-kselftest/20190828093143.163302-1-brendanhiggins@google.com/
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Tim.Bird@sony.com
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for assertions which are like expectations except the test
terminates if the assertion is not satisfied.
The idea with assertions is that you use them to state all the
preconditions for your test. Logically speaking, these are the premises
of the test case, so if a premise isn't true, there is no point in
continuing the test case because there are no conclusions that can be
drawn without the premises. Whereas, the expectation is the thing you
are trying to prove. It is not used universally in x-unit style test
frameworks, but I really like it as a convention. You could still
express the idea of a premise using the above idiom, but I think
KUNIT_ASSERT_* states the intended idea perfectly.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for aborting/bailing out of test cases, which is needed for
implementing assertions.
An assertion is like an expectation, but bails out of the test case
early if the assertion is not met. The idea with assertions is that you
use them to state all the preconditions for your test. Logically
speaking, these are the premises of the test case, so if a premise isn't
true, there is no point in continuing the test case because there are no
conclusions that can be drawn without the premises. Whereas, the
expectation is the thing you are trying to prove.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add support for expectations, which allow properties to be specified and
then verified in tests.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add `struct kunit_assert` and friends which provide a structured way to
capture data from an expectation or an assertion (introduced later in
the series) so that it may be printed out in the event of a failure.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A number of test features need to do pretty complicated string printing
where it may not be possible to rely on a single preallocated string
with parameters.
So provide a library for constructing the string as you go similar to
C++'s std::string. string_stream is really just a string builder,
nothing more.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Create a common API for test managed resources like memory and test
objects. A lot of times a test will want to set up infrastructure to be
used in test cases; this could be anything from just wanting to allocate
some memory to setting up a driver stack; this defines facilities for
creating "test resources" which are managed by the test infrastructure
and are automatically cleaned up at the conclusion of the test.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Latypov