Allow the user space application to create and release an rpmsg device
by adding RPMSG_CREATE_DEV_IOCTL and RPMSG_RELEASE_DEV_IOCTL ioctrls to
the /dev/rpmsg_ctrl interface
The RPMSG_CREATE_DEV_IOCTL Ioctl can be used to instantiate a local rpmsg
device.
Depending on the back-end implementation, the associated rpmsg driver is
probed and a NS announcement can be sent to the remote processor.
The RPMSG_RELEASE_DEV_IOCTL allows the user application to release a
rpmsg device created either by the remote processor or with the
RPMSG_CREATE_DEV_IOCTL call.
Depending on the back-end implementation, the associated rpmsg driver is
removed and a NS destroy rpmsg can be sent to the remote processor.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-12-arnaud.pouliquen@foss.st.com
For the rpmsg virtio backend, the current implementation of the rpmsg char
only allows to instantiate static(i.e. prefixed source and destination
addresses) end points, and only on the Linux user space initiative.
This patch defines the "rpmsg-raw" channel and registers it to the rpmsg bus.
This registration allows:
- To create the channel at the initiative of the remote processor
relying on the name service announcement mechanism. In other words the
/dev/rpmsgX interface is instantiate by the remote processor.
- To use the channel object instead of the endpoint, thus preventing the
user space from having the knowledge of the remote processor's
endpoint addresses.
- To rely on udev to be inform when a /dev/rpmsgX is created on remote
processor request, indicating that the remote processor is ready to
communicate.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-11-arnaud.pouliquen@foss.st.com
Current implementation create/destroy a new endpoint on each
rpmsg_eptdev_open/rpmsg_eptdev_release calls.
For a rpmsg device created by the NS announcement a default endpoint is created.
In this case we have to reuse the default rpmsg device endpoint associated to
the channel instead of creating a new one.
This patch prepares the introduction of a rpmsg channel device for the
char device. The rpmsg channel device will require a default endpoint to
communicate to the remote processor.
Add the default_ept field in rpmsg_eptdev structure.This pointer
determines the behavior on rpmsg_eptdev_open and rpmsg_eptdev_release call.
- If default_ept == NULL:
Use the legacy behavior by creating a new endpoint each time
rpmsg_eptdev_open is called and release it when rpmsg_eptdev_release
is called on /dev/rpmsgX device open/close.
- If default_ept is set:
use the rpmsg device default endpoint for the communication.
Add protection in rpmsg_eptdev_ioctl to prevent to destroy a default endpoint.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-10-arnaud.pouliquen@foss.st.com
Introduce the rpmsg_chrdev_eptdev_alloc and rpmsg_chrdev_eptdev_add
internal function to split the allocation part from the device add.
This patch prepares the introduction of a rpmsg channel device for the
char device. An default endpoint will be created,
referenced in the rpmsg_eptdev structure before adding the devices.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-9-arnaud.pouliquen@foss.st.com
The rpmsg_chrdev driver has been replaced by the rpmsg_ctrl driver
for the /dev/rpmsg_ctrlX devices management. The reference for the
driver override is now the rpmsg_ctrl.
Update the rpmsg_chrdev_register_device function to reflect the update,
and rename the function to use the rpmsg_ctrldev prefix.
The platform drivers are updated accordingly.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-8-arnaud.pouliquen@foss.st.com
Create the rpmsg_ctrl.c module and move the code related to the
rpmsg_ctrldev device in this new module.
Add the dependency between rpmsg_char and rpmsg_ctrl in the
kconfig file:
1) RPMSG_CTRL can set as module or built-in if
RPMSG=y || RPMSG_CHAR=y || RPMSG_CHAR=n
2) RPMSG_CTRL can not be set as built-in if
RPMSG=m || RPMSG_CHAR=m
Note that RPMGH_CHAR and RPMSG_CTRL can be activated separately.
Therefore, the RPMSG_CTRL configuration must be set for backwards compatibility.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-4-arnaud.pouliquen@foss.st.com
Migrate the creation of the rpmsg class from the rpmsg_char
to the core that the class is usable by the rpmsg_char and
the future rpmsg_ctrl module.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-3-arnaud.pouliquen@foss.st.com
To prepare the split of the code related to the control (ctrldev)
and the endpoint (eptdev) devices in 2 separate files:
- Rename and export the functions in rpmsg_char.h.
- Suppress the dependency with the rpmsg_ctrldev struct in the
rpmsg_eptdev_create function.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-2-arnaud.pouliquen@foss.st.com
rpmsg_trysend() returns -ENOMEM when no rpmsg buffer can be allocated.
this causes write to fail with this error as opposed to -EAGAIN.
this is what user space applications (and libraries like boost.asio)
would expect when using normal character devices.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220313024541.1579848-2-tim@klingt.org
In qcom_channel_state_worker(), we are setting channel->registered
to true when registering a channel, but this is getting repeated both
before and after re-locking the channels_lock spinlock, which is
obviously a typo.
Remove the assignment done out of the spinlock to fix this redundancy.
Fixes: 53e2822e56 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220114133259.247726-1-angelogioacchino.delregno@collabora.com
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kzalloc(). For example:
struct glink_defer_cmd {
struct list_head node;
struct glink_msg msg;
u8 data[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220216030720.1839503-1-chi.minghao@zte.com.cn
On msm8953 the channel seems to be already opened when booting Linux but
we still need to open it for communication with regulators etc.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220220201909.445468-6-luca@z3ntu.xyz
qcom_smd's only child, smd-rpm uses arch_initcall and both have to be up
before almost anything else to ensure the MSM SoCs will work fine and
nothing will have to resort to probe defering, as this is the main pillar
of all things DVFS on these machines. Promote it to arch_initcall to avoid
such issues.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211230023253.1123142-1-konrad.dybcio@somainline.org
The cdev cleanup in the rpmsg_char driver was not performed properly,
resulting in unpredicable behaviour when the parent remote processor is
stopped with any of the cdevs open by a client.
The two patches transitions the implementation to use cdev_device_add()
and cdev_del_device(), to capture the relationship between the two
objects, and relocates the incorrectly placed cdev_del().
-----BEGIN PGP SIGNATURE-----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=KdZJ
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg fixes from Bjorn Andersson:
"The cdev cleanup in the rpmsg_char driver was not performed properly,
resulting in unpredicable behaviour when the parent remote processor
is stopped with any of the cdevs open by a client.
Two patches transitions the implementation to use cdev_device_add()
and cdev_del_device(), to capture the relationship between the two
objects, and relocates the incorrectly placed cdev_del()"
* tag 'rpmsg-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev
rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
partial support for < MAX_ORDER - 1 granularity for virtio-mem
driver_override for vdpa
sysfs ABI documentation for vdpa
multiqueue config support for mlx5 vdpa
Misc fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmHiDHkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpVT4H/3Veixt3uYPOmuLU2tSx+8X+sFTtik81hyiE
okz5fRJrxxA8SqS76FnmO10FS4hlPOGNk0Z5WVhr0yihwFvPLvpCM/xi2Lmrz9I7
pB0sXOIocEL1xApsxukR9K1Twpb2hfYsflbJYUVlRfhS5G0izKJNZp5I7OPrzd80
vVNNDWKW2iLDlfqsavumI4Kvm4nsFuCHG03jzMtcIa7YTXYV3DORD4ZGFFVUOIQN
t5F74TznwHOeYgJeg7TzjFjfPWmXjLetvx10QX1A1uOvwppWW/QY6My0UafTXNXj
VB3gOwJPf+gxXAXl/4bafq4NzM0xys6cpcPpjvhmU+erY4UuyAU=
=Y1eO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.
- partial support for < MAX_ORDER - 1 granularity for virtio-mem
- driver_override for vdpa
- sysfs ABI documentation for vdpa
- multiqueue config support for mlx5 vdpa
- and misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
vdpa/mlx5: Fix tracking of current number of VQs
vdpa/mlx5: Fix is_index_valid() to refer to features
vdpa: Protect vdpa reset with cf_mutex
vdpa: Avoid taking cf_mutex lock on get status
vdpa/vdpa_sim_net: Report max device capabilities
vdpa: Use BIT_ULL for bit operations
vdpa/vdpa_sim: Configure max supported virtqueues
vdpa/mlx5: Report max device capabilities
vdpa: Support reporting max device capabilities
vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
vdpa: Add support for returning device configuration information
vdpa/mlx5: Support configuring max data virtqueue
vdpa/mlx5: Fix config_attr_mask assignment
vdpa: Allow to configure max data virtqueues
vdpa: Read device configuration only if FEATURES_OK
vdpa: Sync calls set/get config/status with cf_mutex
vdpa/mlx5: Distribute RX virtqueues in RQT object
vdpa: Provide interface to read driver features
vdpa: clean up get_config_size ret value handling
virtio_ring: mark ring unused on error
...
struct rpmsg_eptdev contains a struct cdev. The current code frees
the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is
a managed object, therefore its release is not predictable and the
rpmsg_eptdev could be freed before the cdev is entirely released.
The cdev_device_add/del() API was created to address this issue
(see commit '233ed09d7fda ("chardev: add helper function to register
char devs with a struct device")'), use it instead of cdev add/del().
Fixes: c0cdc19f84 ("rpmsg: Driver for user space endpoint interface")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an
error, the rpmsg device and default endpoint should be freed before
exiting the function.
Fixes: 5e619b4867 ("rpmsg: Split rpmsg core and virtio backend")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211206190758.10004-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
kernel documentation specification:
"The return value, if any, should be described in a dedicated section
named Return."
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211108140126.3530-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The remoteproc repo is moved to a new path on git.kernel.org, to allow
Mathieu push access to the branches.
Support for the Mediatek MT8195 SCP was added, the related DeviceTree
binding was converted to YAML and MT8192 SCP was documented as well.
Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in
resuming the system after suspend, a new remoteproc driver for booting
this core is introduced.
A new driver to support the DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP is added.
The Qualcomm modem and TrustZone based remoteproc drivers gains support
for the modem in SC7280 and MSM8996 gains support for a missing
power-domain.
Throughout the Qualcomm drivers, the support for informing the always-on
power coprocessor about the state of each remoteproc is reworked to
avoid complications related to our use of genpd and the system suspend
state.
Lastly a number of small fixes are found throughout the drivers and
framework.
-----BEGIN PGP SIGNATURE-----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=i0ql
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The remoteproc repo is moved to a new path on git.kernel.org, to allow
Mathieu push access to the branches.
Support for the Mediatek MT8195 SCP was added, the related DeviceTree
binding was converted to YAML and MT8192 SCP was documented as well.
Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in
resuming the system after suspend, a new remoteproc driver for booting
this core is introduced.
A new driver to support the DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP is added.
The Qualcomm modem and TrustZone based remoteproc drivers gains
support for the modem in SC7280 and MSM8996 gains support for a
missing power-domain.
Throughout the Qualcomm drivers, the support for informing the
always-on power coprocessor about the state of each remoteproc is
reworked to avoid complications related to our use of genpd and the
system suspend state.
Lastly a number of small fixes are found throughout the drivers and
framework"
* tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (39 commits)
remoteproc: Remove vdev_to_rvdev and vdev_to_rproc from remoteproc API
remoteproc: omap_remoteproc: simplify getting .driver_data
remoteproc: qcom_q6v5_mss: Use devm_platform_ioremap_resource_byname() to simplify code
remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()'
remoteproc: Fix spelling mistake "atleast" -> "at least"
remoteproc: imx_dsp_rproc: mark PM functions as __maybe_unused
remoteproc: imx_dsp_rproc: Correct the comment style of copyright
dt-bindings: dsp: fsl: Update binding document for remote proc driver
remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX
remoteproc: imx_rproc: Add IMX_RPROC_SCU_API method
remoteproc: imx_rproc: Move common structure to header file
rpmsg: char: Remove useless include
remoteproc: meson-mx-ao-arc: fix a bit test
remoteproc: mss: q6v5-mss: Add modem support on SC7280
dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding
remoteproc: qcom: pas: Add SC7280 Modem support
dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support
remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998
MAINTAINERS: Update remoteproc repo url
dt-bindings: remoteproc: k3-dsp: Cleanup SoC compatible from DT example
...
For the GLINK implementation this adds support for splitting outgoing
messages that are too large to fit in the fifo, it introduces the use of
"read notifications", to avoid polling in the case where the outgoing
fifo is full and a few bugs are squashed.
The return value of rpmsg_create_ept() for when RPMSG is disabled is
corrected to return a valid error, the Mediatek rpmsg driver is updated
to match the DT binding and a couple of cleanups are done in the virtio
rpmsg driver.
-----BEGIN PGP SIGNATURE-----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=jGA6
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"For the GLINK implementation this adds support for splitting outgoing
messages that are too large to fit in the fifo, it introduces the use
of "read notifications", to avoid polling in the case where the
outgoing fifo is full and a few bugs are squashed.
The return value of rpmsg_create_ept() for when RPMSG is disabled is
corrected to return a valid error, the Mediatek rpmsg driver is
updated to match the DT binding and a couple of cleanups are done in
the virtio rpmsg driver"
* tag 'rpmsg-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Remove channel decouple from rpdev release
rpmsg: glink: Remove the rpmsg dev in close_ack
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: virtio_rpmsg_bus: use dev_warn_ratelimited for msg with no recipient
rpmsg: virtio: Remove unused including <linux/of_device.h>
rpmsg: Change naming of mediatek rpmsg property
rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
rpmsg: glink: Replace strncpy() with strscpy_pad()
Return the rpmsg buffer MTU for sending message, so rpmsg users
can split a long message in several sub rpmsg buffers.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211015094701.5732-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current design sleeps unconditionally in TX FIFO full case and
wakeup only after sleep timer expires which adds random delays in
clients TX path.
Avoid sleep and use READ_NOTIFY command so that writer can be woken up
when remote notifies about read completion by sending IRQ.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-7-git-send-email-deesin@codeaurora.org
If a channel is being rapidly restarting and the kobj release worker is
busy, there is a chance the rpdev_release function will run after the
channel struct itself has been released.
There should not be a need to decouple the channel from rpdev in the
rpdev release since that should only happen from the close commands.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-6-git-send-email-deesin@codeaurora.org
Un-register and register of rpmsg driver is sending invalid open_ack
on closed channel.
To avoid sending invalid open_ack case unregister the rpmsg device
after receiving the local_close_ack from remote side.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
[bjorn: s/strlcpy/strscpy/]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-5-git-send-email-deesin@codeaurora.org
With current design the transport can send packets of size upto
FIFO_SIZE which is 16k and return failure for all packets above 16k.
Add TX_DATA_CONT command to send packets greater than 16k by splitting
into 8K chunks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-4-git-send-email-deesin@codeaurora.org
Even though it may be user-space's fault for this error (some application
terminated or crashed without cleaning up it's endpoint), the rpmsg
communication should not overflow the syslog with too many messages.
A dev_warn_ratelimited() seems like a good alternative in case this can
occur.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928132902.1594277-1-aardelean@deviqon.com
Remove including <linux/of_device.h> that don't need it.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811123125.143-1-caihuoqing@baidu.com
Change from "mtk,rpmsg-name" to "mediatek,rpmsg-name" to sync with the
vendor name defined in vendor-prefixes.yaml.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Link: https://lore.kernel.org/r/20210924033935.2127-6-tinghan.shen@mediatek.com
[Fixed capital letter in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad() (as it seems this case
expects the NUL padding to fill the allocation following the flexible
array). This additionally silences a warning seen when building under
-Warray-bounds:
./include/linux/fortify-string.h:38:30: warning: '__builtin_strncpy' offset 24 from the object at '__mptr' is out of the bounds of referenced subobject 'data' with type 'u8[]' {aka 'unsigned char[]'} at offset 24 [-Warray-bounds]
38 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/fortify-string.h:50:9: note: in expansion of macro '__underlying_strncpy'
50 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
drivers/rpmsg/qcom_glink_native.c: In function 'qcom_glink_work':
drivers/rpmsg/qcom_glink_native.c:36:5: note: subobject 'data' declared here
36 | u8 data[];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/20210728020745.GB35706@embeddedor
Link: https://lore.kernel.org/r/20210818060533.3569517-4-keescook@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most device_id structs provide a driver_data field that can be used
by drivers to associate data more easily for a particular device ID.
Add the same for the rpmsg_device_id.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When idr_find() returns NULL to intent, no error return code of
qcom_glink_rx_data() is assigned.
To fix this bug, ret is assigned with -ENOENT in this case.
Fixes: 64f95f8792 ("rpmsg: glink: Use the local intents when receiving data")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306133624.17237-1-baijiaju1990@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmsg_create_ept function is invoked when the device is opened.
As only one endpoint must be created per device. It is not possible to
open the same device twice. But there is nothing to prevent multi open.
Return -EBUSY when device is already opened to have a generic error
instead of relying on the back-end to potentially detect the error.
Without this patch for instance the GLINK driver return -EBUSY while
the virtio bus return -ENOSPC.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-7-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Instantiate the rpmsg_char device on virtio RPMsg bus creation.
This provides the capability, with the RPMSG_CREATE_EPT_IOCTL ioctl,
to create RPMsg char device endpoints relying on the
rpmsg_chrdev_create_eptdev API.
Notice that the created endpoints are attached to the rpmsg_ctldev
device, but not associated to a channel.
As consequence, the endpoint source and destination addresses have to
been specified and there is no channel creation and no name service
announcement to inform the remote side.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-6-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When the endpoint device is created by the application, a destination
address is specified in the rpmsg_channel_info structure. Since the
rpmsg_endpoint structure does not store the destination address,
this destination address must be specified when sending a message.
Replaces rpmsg_send with rpmsg_sendto to allow to specify the
destination address. This implementation is requested for compatibly with
some rpmsg backends like the virtio backend.
For this, the GLINK an SMD drivers have been updated to support the
rpmsg_sendto, even if the destination address is ignored for these
backends. For these drivers, the rpmsg_send and rpmsg_trysend ops are
preserved to avoid breaking the legacy.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210311140413.31725-5-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To be coherent with the other functions which are prefixed by
rpmsg_chrdev, rename the rpmsg_char_init function.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210311140413.31725-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
With an x86_64 architecture W=1 build, qcom_glink_ssr_notify() is
reported as having no previous prototype. The prototype is found in
"qcom_glink.h", so we just need "qcom_glink_ssr.c" to include that
file.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210105235528.32538-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The kerneldoc comments for the do_cleanup_msg and cleanup_done_msg
structures describe the fields, but don't prefix the field names
with "@". Add those, to get rid of some W=1 build warnings on
an x86_64 architecture build.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210105235603.32663-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Make the RPMSG name service announcement a stand alone driver so that it
can be reused by other subsystems. It is also the first step in making the
functionatlity transport independent, i.e that is not tied to virtIO.
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Co-developed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20201120214245.172963-9-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Make function rpmsg_register_device() and rpmsg_unregister_device()
functions public so that they can be used by other clients. While
doing so get rid of two obsolete function, i.e register_rpmsg_device()
and unregister_rpmsg_device(), to prevent confusion.
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-8-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the channel creation API as a first step to be able to define the
name service announcement as a rpmsg driver independent from the RPMsg
virtio bus.
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-6-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rename the internal function as it is internal, and as
the name will be used in rpmsg_core.
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-5-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move structure rpmsg_ns_msg to its own header file so that
it can be used by other entities.
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-4-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use rpmsg byte conversion functions in order for the RPMSG
headers and generic functions to be used by external entities.
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201120214245.172963-3-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces rpmsg_char support for GLINK and fixes a few issues.
-----BEGIN PGP SIGNATURE-----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=fv8T
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces rpmsg_char support for GLINK and fixes a few issues"
* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink: Expose rpmsg name attr for glink
rpmsg: glink: Add support for rpmsg glink chrdev
rpmsg: Guard against null endpoint ops in destroy
rpmsg: glink: Use complete_all for open states
rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
rpmsg: Avoid double-free in mtk_rpmsg_register_device
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
Arnaud Pouliquen