Check for the return value of platform_get_irq(): if no interrupt
is specified, it wouldn't make sense to call devm_request_irq().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In order to simplify ioremapping resources, instead of calling
platform_get_resource_byname() and then devm_ioremap_resource(),
simply call devm_platform_ioremap_resource_byname().
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Function pwrap_wait_for_state() is a function that polls an address
through a helper function, but this is the very same operation that
the readx_poll_timeout macro means to do.
Convert all instances of calling pwrap_wait_for_state() to instead
use the read_poll_timeout macro.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220517104712.24579-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Here is the large set of char, misc, and other driver subsystem updates
for 5.19-rc1. The merge request for this has been delayed as I wanted
to get lots of linux-next testing due to some late arrivals of changes
for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers
and cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that
below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no reported
problems.
Note, there are 3 merge conflicts when merging this with your tree:
- MAINTAINERS, should be easy to resolve
- drivers/slimbus/qcom-ctrl.c, should be straightforward
resolution
- drivers/misc/lkdtm/stackleak.c, not an easy resolution. This
has been noted in the linux-next tree for a while, and
resolved there, here's a link to the resolution that Stephen
came up with and that Kees says is correct:
https://lore.kernel.org/r/20220509185344.3fe1a354@canb.auug.org.au
I will be glad to provide a merge point that contains these resolutions
if that makes things any easier for you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnkbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylOrgCggbbAFwESBY9o2YfpG+2VOLpc0GAAoJgY1XN8
P/gumbLEpFvoBZ5xLIW8
=KCgk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request,
or that came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including
a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE.
-----BEGIN PGP SIGNATURE-----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=2qok
-----END PGP SIGNATURE-----
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went through
several rebases before the merge window as bugs were found, so they
remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKZKqsACgkQmmx57+YA
GNnO/w//dgJBlkmoIIKlG2eJsvoUKwDt7MuLEMCqSqYYUSvMENFwKK66INMDIJ3l
PmKf94JadlpBm2OB2vzW+D1EtaLGX9eXZkKD+vyB1I1yFkKdzEPcAfitfrRwe58E
pR4nQd/jVL4UCY+pp442O1q9VvMpMV9P4ILJGPS/PpsD5CT9Gn8m9svIIuNuDRFd
nwpyZC3l32jVLo9iuLmwZUvxtOWI3hTqZrnxhByBhlvtnGexRsq/VhfubK2uzBi1
CyWHjqzOSmseGmsUDwv9LFqVV9YRCeisS3IElA5L0VgM0XvHKA+f9qyF7V6zI20g
y9LtqhdAtiTpE/aUrOW2LDYaM/bc7RilYZrWchoZbCEsHhV4C+ld3QoTyxvGscvG
tbznhvZKdUNX8LHS0J9NqIj1q1YGN5ei5r/C5R8DBj1q8VcTVnq3dms8xzVTd35o
xS5BbLFliiI96jc7S6LaQizXheYjAfdPhmXUAxNXvWIVQ6SXnf8/U/RB9Zzjb8hm
FH2Gu8m/Dh2MHKBBRWSVw8VahV0V7WiEaWeYuwwTbW1wUrsWiizVaPnqrt6Cq9DW
oJZgBvktWEXUQz73qrnvwo9GjcKqAxaWKWq05hHKHKuLGezsPAyIhIKr51V2xqqw
cp2OIMCsN5GYENOhHvt6BMRAI5iA4VyFDtWAqw9B6EIwno6N7Z4=
=cnSb
-----END PGP SIGNATURE-----
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
The kernel test robot found this inconsistency:
>> drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
737 | static const struct of_device_id ixp4xx_npe_of_match[] = {
This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.
Fix it by dropping of_match_ptr() around the match.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220523085520.913217-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
These updates are for platform specific code in arch/arm/, mostly fixing
minor issues. The at91 platform gains support for better power
management on the lan966 platform and new firmware on the sama5
platform. The mediatek soc drivers in turn are enabled for the new
mt8195 SoC.
-----BEGIN PGP SIGNATURE-----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=Eoh1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull 32-bit ARM SoC updates from Arnd Bergmann:
"These updates are for platform specific code in arch/arm/, mostly
fixing minor issues.
The at91 platform gains support for better power management on the
lan966 platform and new firmware on the sama5 platform. The mediatek
soc drivers in turn are enabled for the new mt8195 SoC"
* tag 'arm-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: at91: debug: add lan966 support
ARM: at91: pm: add support for sama5d2 secure suspend
ARM: at91: add code to handle secure calls
ARM: at91: Kconfig: implement PIT64B selection
ARM: at91: pm: add quirks for pm
ARM: at91: pm: use kernel documentation style
ARM: at91: pm: introduce macros for pm mode replacement
ARM: at91: pm: keep documentation inline with structure members
orion5x: fix typos in comments
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel
ARM: shmobile: Drop commas after dt_compat sentinels
soc: mediatek: mutex: remove mt8195 MOD0 and SOF0 definition
MAINTAINERS: Add Broadcom BCMBCA entry
arm: bcmbca: add arch bcmbca machine entry
MAINTAINERS: Broadcom internal lists aren't maintainers
dt-bindings: pwrap: mediatek: Update pwrap document for mt8195
soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0
soc: mediatek: add mtk-mutex support for mt8195 vdosys0
soc: mediatek: add mtk-mmsys support for mt8195 vdosys0
...
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 5e68c0fc8d ("soc: amlogic: Add Meson6/Meson8/Meson8b/Meson8m2 SoC Information driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220524065729.33689-1-linmq006@gmail.com
Nexus 7 Android tablet can be turned off using a special bootloader
command which is conveyed to bootloader by putting magic value into the
special scratch register and then rebooting normally. This power-off
method should be invoked if USB cable is connected. Bootloader then will
display battery status and power off the device. This behaviour is
borrowed from downstream kernel and matches user expectations, otherwise
it looks like device got hung during power-off and it may wake up on
USB disconnect.
Switch PMC driver to sys-off handler API, which provides drivers with
chained power-off callbacks functionality that is required for powering-off
devices properly. It also brings resource-managed API for the restart
handler registration that makes PMC driver code cleaner.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As per the current implementation only single callback data gets saved per
event, driver is throwing an error if try to register multiple callback for
same event. So at time of unregistration of any event required things are
event details and callback handler as parameter of xlnx_unregister_event().
As part of adding support of multiple callbacks for same event also require
change in prototype of xlnx_unregister_event().
During unregistration of any events, now required things are event details,
callback handler and agent's private data as parameter of
xlnx_unregister_event().
Also modify the usage of xlnx_unregister_event() in xilinx/zynqmp_power.c
driver as per new implementation.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-3-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation of only single callback data gets
saved per event, driver is throwing an error if try to register multiple
callback for same event.
Add support of multiple callbacks data for same event. So agent can
register for same event with multiple callbacks. Here event management
driver will store the callbacks as list in Hash table entry for that event.
Here each callback data contain 2 element as callback handler and private
data of agent driver.
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Link: https://lore.kernel.org/r/20220427074803.19009-2-abhyuday.godhasara@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detailed description for this pull request:
1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq driver
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller).
-----BEGIN PGP SIGNATURE-----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=/3W8
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for 5.19-rc1 from Chanwoo Choi:
"1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq drivers
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller)."
* tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Keep cpufreq_policy for possible cpus
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
PM / devfreq: Add cpu based scaling support to passive governor
PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
PM / devfreq: rk3399_dmc: Block PMU during transitions
soc: rockchip: power-domain: Manage resource conflicts with firmware
PM / devfreq: rk3399_dmc: Avoid static (reused) profile
PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()
PM / devfreq: rk3399_dmc: Disable edev on remove()
PM / devfreq: rk3399_dmc: Support new *-ns properties
PM / devfreq: rk3399_dmc: Support new disable-freq properties
PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD
PM / devfreq: rk3399_dmc: Drop excess timing properties
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
of_find_matching_node_and_match returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 4c58063d42 ("soc: rockchip: add driver handling grf setup")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220516072013.19731-1-linmq006@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
-----BEGIN PGP SIGNATURE-----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=/Dqp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJ5hB4ACgkQmmx57+YA
GNksBxAAj09+d2U1sFSJl3HiHTrXyg3MYoG0dA1QK2CRKucdwMf6KBGpEHTQyL6a
Iqan6URrTqEM3WP4suBsZh8vbv1C8u7KGWwDAMqJ18BkigoGHEV1PyvmHYRvPoT2
6DSHAkGbYfDglxXZ4JcxNaQk3+t6rZpe5LcRRgQ7JpoKfzlqKxfSJfPFLzYAvhSV
qThiyd3GvfcgkVHL9noh4BrBrnNRj7wMzUwQnhW5aWebN+DqgG8zlzmmZEQx61uR
sjMogRZNpGXVAR+4yvPZNoxTGM0plssxlkDQGS4b0XLP1t7ohr22eFPTrWqcsYCi
h4fa3nXxUIoTDJXQ7nmU04VXp5xVUtQKKe+zXIvQBT98OkM1f6ep5i7rrEh5DZxJ
TWVdRLuIVpHVsVARqq+qpEnwyDeiF3Hgmope3xPYhEIs1WcIOQzWBjHbNTNeiFdy
fQMrmAQjirXJBV18ImRSMcAXW+Shc72vnj6fViQcrL5Pzj1HJFMjh/bpPzAhIUYJ
w9to8mpNgHUpMwnkfMUqQDV6FANVbYPqancK/z4rEPd8mj6bq1z2GEQq2e9+cAfM
imyD30+g7fm7e4mxp53mv/oxqf4NJExE0eIjXAQY53at0TCk+ngsxJd96Wz3aIpB
eL9YN5x+y6vXkFC+hsnX2/QdUiVCmfpbrez2QqzoZncSkJ4mjdI=
=rjVH
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3IvYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6lhwf7BpYDyiaYHBKQLXWWDZj1QanO6bjM
fMlxvVdggfeLW6ijerCb+wf2jNQY75lWRRny4x4WWP+sSVZ4u9SUJlxLrwo/aWYr
44KWWr4PkSMDm5j2bQyy8S9o01ZpxT/FOqqTC51PwgMx7yxB7+d1Z1txWwp5W0jB
Ps92O4bKRfvCCF7Mgjw3/FDu5iek6+9pHx5dQxQ1CWPuvVJos6M9Ktkv27x3oOvI
S4v6Y7v5m1WxSjUK2p09pIGP9AJrHhmRNJF3R/ZrXqUKAlpCQFK6DwZ9mY/rfcfj
tPoqCwj9/UmzG+GlBo8z7I2GQmF7vmwH6bqjP/T6SHOoxE9/fiqT2Swc5A==
=S4x7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2GwC
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.19:
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: fix semicolon.cocci warnings
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
soc: imx: imx8m-blk-ctrl: set power device name
soc: imx: gpcv2: add support for i.MX8MP power domains
soc: imx: gpcv2: add PGC control register indirection
Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* wkup_m3: io isolation, voltage scaling, vtt regulator and a debug option to stop m3 in suspend.
* tisci: support for polled mode for system suspend, reset driver is now enabled for COMPILE_TEST
* knav, dma.. misc cleanups for IS_ERR, pm_run_time*, and various other fixups.
-----BEGIN PGP SIGNATURE-----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=Nlpv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7h5b
-----END PGP SIGNATURE-----
Merge tag 'ti-driver-soc-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/drivers
TI Driver updates for v5.19
* wkup_m3: io isolation, voltage scaling, vtt regulator and a debug option to stop m3 in suspend.
* tisci: support for polled mode for system suspend, reset driver is now enabled for COMPILE_TEST
* knav, dma.. misc cleanups for IS_ERR, pm_run_time*, and various other fixups.
* tag 'ti-driver-soc-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Add debug option to halt m3 in suspend
soc: ti: wkup_m3_ipc: Add support for i2c voltage scaling
soc: ti: wkup_m3_ipc: Add support for IO Isolation
soc: ti: knav_qmss_queue: Use IS_ERR instead of IS_ERR_OR_NULL when checking knav_queue_open() result
soc: ti: pm33xx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
firmware: ti_sci: Switch transport to polled mode during system suspend
soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator
soc: ti: knav_qmss_queue: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: knav_dma: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
reset: ti-sci: Allow building under COMPILE_TEST
soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc
soc: ti: omap_prm: Use of_device_get_match_data()
soc: ti: pruss: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
soc: ti: replace usage of found with dedicated list iterator variable
soc: ti: wkup_m3_ipc: fix platform_get_irq.cocci warning
Link: https://lore.kernel.org/r/20220507163424.pvqnwrxpoo73lmp2@debtless
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On RK3399 platforms, power domains are managed mostly by the kernel
(drivers/soc/rockchip/pm_domains.c), but there are a few exceptions
where ARM Trusted Firmware has to be involved:
(1) system suspend/resume
(2) DRAM DVFS (a.k.a., "ddrfreq")
Exception (1) does not cause much conflict, since the kernel has
quiesced itself by the time we make the relevant PSCI call.
Exception (2) can cause conflict, because of two actions:
(a) ARM Trusted Firmware needs to read/modify/write the PMU_BUS_IDLE_REQ
register to idle the memory controller domain; the kernel driver
also has to touch this register for other domains.
(b) ARM Trusted Firmware needs to manage the clocks associated with
these domains.
To elaborate on (b): idling a power domain has always required ungating
an array of clocks; see this old explanation from Rockchip:
https://lore.kernel.org/linux-arm-kernel/54503C19.9060607@rock-chips.com/
Historically, ARM Trusted Firmware has avoided this issue by using a
special PMU_CRU_GATEDIS_CON0 register -- this register ungates all the
necessary clocks -- when idling the memory controller. Unfortunately,
we've found that this register is not 100% sufficient; it does not turn
the relevant PLLs on [0].
So it's possible to trigger issues with something like the following:
1. enable a power domain (e.g., RK3399_PD_VDU) -- kernel will
temporarily enable relevant clocks/PLLs, then turn them back off
2. a PLL (e.g., PLL_NPLL) is part of the clock tree for
RK3399_PD_VDU's clocks but otherwise unused; NPLL is disabled
3. perform a ddrfreq transition (rk3399_dmcfreq_target() -> ...
drivers/clk/rockchip/clk-ddr.c / ROCKCHIP_SIP_DRAM_FREQ)
4. ARM Trusted Firmware unagates VDU clocks (via PMU_CRU_GATEDIS_CON0)
5. ARM Trusted firmware idles the memory controller domain
6. Step 5 waits on the VDU domain/clocks, but NPLL is still off
i.e., we hang the system.
So for (b), we need to at a minimum manage the relevant PLLs on behalf
of firmware. It's easier to simply manage the whole clock tree, in a
similar way we do in rockchip_pd_power().
For (a), we need to provide mutual exclusion betwen rockchip_pd_power()
and firmware. To resolve that, we simply grab the PMU mutex and release
it when ddrfreq is done.
The Chromium OS kernel has been carrying versions of part of this hack
for a while, based on some new custom notifiers [1]. I've rewritten as a
simple function call between the drivers, which is OK because:
* the PMU driver isn't enabled, and we don't have this problem at all
(the firmware should have left us in an OK state, and there are no
runtime conflicts); or
* the PMU driver is present, and is a single instance.
And the power-domain driver cannot be removed, so there's no lifetime
management to worry about.
For completeness, there's a 'dmc_pmu_mutex' to guard (likely
theoretical?) probe()-time races. It's OK for the memory controller
driver to start running before the PMU, because the PMU will avoid any
critical actions during the block() sequence.
[0] The RK3399 TRM for PMU_CRU_GATEDIS_CON0 only talks about ungating
clocks. Based on experimentation, we've found that it does not power
up the necessary PLLs.
[1] CHROMIUM: soc: rockchip: power-domain: Add notifier to dmc driver
https://chromium-review.googlesource.com/q/I242dbd706d352f74ff706f5cbf42ebb92f9bcc60
Notably, the Chromium solution only handled conflict (a), not (b).
In practice, item (b) wasn't a problem in many cases because we
never managed to fully power off PLLs. Now that the (upstream) video
decoder driver performs runtime clock management, we often power off
NPLL.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There are two drivers in arch/arm/plat-pxa: mfp and ssp. Both
of them should ideally not be needed at all, as there are
proper subsystems to replace them.
OTOH, they are self-contained and can simply be normal
SoC drivers, so move them over there to eliminate one more
of the plat-* directories.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> (mach-pxa)
Acked-by: Lubomir Rintel <lkundrak@v3.sk> (mach-mmp)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set of changes adds nvmem cell lookup entries for Tegra194 that are
used to read calibration data from the SoC fuses, and updates the reset
sources for Tegra234.
Other than that, included is a minor build fix for a missing dependency
that can be encountered very rarely in random config builds. Lastly some
kerneldoc comments are added to avoid build warnings.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmJ1LD8THHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYh8D/9PZ9Z6MfFP/4mU+LQccO7OW4iw+nUq
J3LSOby2SRlTBLz0BsgYYoxEd1jDcPTvN9ND9tkmy8I77doVfgq2tcnBxqKZSwdy
w+mhr68cjx5yy0KieevSb3JSEp6hXL728j1CnxofHFy51NY2yuqcIwNRMEfYYX1d
UkCGaFnEjU1PvawDSKiruNy2r8oZaPDKXwtkhGxJedQ83CkCtkE2qNHi1GcJogo9
O8RB7eGIiZflloY83SlhoLm/qILBTGuARKUeXIEC66Ss6tbl1DccJ1i8iZlMr4uV
mOd+jnCiAkzL+EY9geD8e8cltAPqD5lhIwQB4kseB3Jw0+BRgmSMo/qlKo6zoC2x
nxaq5haxKAcE+fY1o5/h36hXCD5ZoeSTRlXowyXuLzvLkzhE/tMdC7SqqjTuDMe4
Yjf4yp50vEnbjdbnSx57yPqT7q1vclcV/or9MkravkV5zSxhzSUgfnuCAabrKNrQ
a/aiGy1yJD2V3iC1jhTQNaja/e7iUNF+TNmEGLlkZSpLzp9nDHJra5h+BklulGVb
qApf2o7sc6I5n7iyb+6WypBbHP+sX6PkkNWx4KDvUmsp3jG7LQiJQPdRiq60iicV
KQ1FqzDjhTyfxxiR2PwDGNZQsyK6DO3qST1oqk3pav55G6aHLsQx4+g3+tFIMhnN
oXskT6rAWqmjyw==
=Gmv7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=S4fJ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.19-rc1
This set of changes adds nvmem cell lookup entries for Tegra194 that are
used to read calibration data from the SoC fuses, and updates the reset
sources for Tegra234.
Other than that, included is a minor build fix for a missing dependency
that can be encountered very rarely in random config builds. Lastly some
kerneldoc comments are added to avoid build warnings.
* tag 'tegra-for-5.19-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Document core domain fields
soc/tegra: pmc: Select REGMAP
soc/tegra: pmc: Update Tegra234 reset sources
soc/tegra: fuse: Add nvmem cell lookup entries for Tegra194
Link: https://lore.kernel.org/r/20220506143005.3916655-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These fields are used to track the state of the core domain. Add basic
descriptions so that kerneldoc can be properly generated for them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sparse reports this repesentative issue
pdr_internal.h:31:22: warning: symbol 'servreg_location_entry_ei' was not declared. Should it be static?
Similar for other servreg_*
Global variables should not be defined in header files.
This only works because pdr_internal.h is only included
by pdr_interface.c. Single file use variables should be
static so add static to their storage-class specifiers.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422173806.21982-1-trix@redhat.com
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQRUAfN3OZ14tapALxsd6alOrecRcQUCYm/5lhMcc3ZlbkBzdmVu
cGV0ZXIuZGV2AAoJEB3pqU6t5xFxITsBAI02bdBvHQAFouu1WzhLzlAPNqjGv3Th
YFOJL4y2oyigAP9zkIGP0e1JcpApPxvlmQnM340ZY+TCth+ahoCWlS4VAg==
=b0QX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gi38
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC NVMe driver and dependencies:
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
* tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux:
nvme-apple: Add initial Apple SoC NVMe driver
dt-bindings: nvme: Add Apple ANS NVMe
soc: apple: Add SART driver
dt-bindings: iommu: Add Apple SART DMA address filter
soc: apple: Add RTKit IPC library
soc: apple: Always include Makefile
Link: https://lore.kernel.org/r/20220505154020.84638-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
5.19, please pull the following:
- Qintao adds a missing NULL check to the Broadcom PMB driver after a
memory allocation
- Li removes the redundant suppress_bind_attrs from the brcmstb_gisb
driver which only has a probe and no remove function
-----BEGIN PGP SIGNATURE-----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=DrJC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ycAK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64 SoCs drivers changes for
5.19, please pull the following:
- Qintao adds a missing NULL check to the Broadcom PMB driver after a
memory allocation
- Li removes the redundant suppress_bind_attrs from the brcmstb_gisb
driver which only has a probe and no remove function
* tag 'arm-soc/for-5.19/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Remove the suppress_bind_attrs attribute of the driver
soc: bcm: Check for NULL return of devm_kzalloc()
Link: https://lore.kernel.org/r/20220504210942.1838248-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds driver support for the HDMI blk-ctrl found on the
i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the description for the i.MX8MP media blk-ctrl.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # MX8MP LCDIF #1 and #2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP added some blk-ctrl peripherals that don't follow the regular
structure of the blk-ctrls in the previous SoCs. Add a new file for those
with currently only the HSIO blk-ctrl being supported. Others will be added
later on.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set the name for the virtual power device to the name of the attached
blk-ctrl domain. Makes the debug output for the power domains a lot
more pleasant to read.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 9d5e7c3e36 ("soc/tegra: pmc: Provide USB sleepwalk register
map") introduced a dependency on the regmap infrastructure, so select
the corresponding Kconfig entry. This avoids failures in random builds
that may otherwise end up having SOC_TEGRA_PMC enabled but not REGMAP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a debugfs option to allow configurable halting of the wkup_m3
during suspend at the last possible point before low power mode entry.
This condition can only be resolved through JTAG and advancing beyond
the while loop in a8_lp_ds0_handler [1]. Although this hangs the system
it forces the system to remain active once it has been entirely
configured for low power mode entry, allowing for register inspection
through JTAG to help in debugging transition errors.
Halt mode can be set using the enable_off_mode entry under wkup_m3_ipc
in the debugfs.
[1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/pm_handlers.c?h=08.02.00.006#n141
Suggested-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[dfustini: add link for a8_lp_ds0_handler() in ti-amx3-cm3-pm-firmware]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220502033211.1383158-1-dfustini@baylibre.com
Allow loading of a binary containing i2c scaling sequences to be
provided to the wkup_m3 firmware in order to properly scale voltage
rails on the PMIC during low power modes like DeepSleep0. Proper binary
format is determined by the FW in use.
Code expects firmware to have 0x0C57 present as the first two bytes
followed by one byte defining offset to sleep sequence followed by one
byte defining offset to wake sequence and then lastly both sequences.
Each sequence is a series of I2C transfers in the form:
u8 length | u8 chip address | u8 byte0/reg address | u8 byte1 | u8 byteN
..
The length indicates the number of bytes to transfer, including the
register address. The length of each transfer is limited by the I2C
buffer size of 32 bytes.
Based on previous work by Russ Dill.
[dfustini: replace FW_ACTION_HOTPLUG with FW_ACTION_UEVENT]
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: add NULL argument to rproc_da_to_va() call]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220426200741.712842-3-dfustini@baylibre.com
AM43xx support isolation of the IOs so that control is taken
from the peripheral they are connected to and overridden by values
present in the CTRL_CONF_* registers for the pad in the control module.
The actual toggling happens from the wkup_m3, so use a DT property from
the wkup_m3_ipc node to allow the PM code to communicate the necessity
for placing the IOs into isolation to the firmware.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220414192722.2978837-3-dfustini@baylibre.com
As the usage of knav_queue_open():
* Returns a handle to the open hardware queue if successful. Use IS_ERR()
* to check the returned value for error codes.
It will only return error codes, not null.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1650765944-20170-1-git-send-email-baihaowen@meizu.com
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@aotmide.com>
Link: https://lore.kernel.org/r/20220418063059.2558074-1-chi.minghao@zte.com.cn
The NVMe co-processor on the Apple M1 uses a DMA address filter called
SART for some DMA transactions. This adds a simple driver used to
configure the memory regions from which DMA transactions are allowed.
Unlike a real IOMMU, SART does not support any pagetables and can't be
implemented inside the IOMMU subsystem using iommu_ops.
It also can't be implemented using dma_map_ops since not all DMA
transactions of the NVMe controller are filtered by SART.
Instead, most buffers have to be registered using the integrated NVMe
IOMMU and we can't have two separate dma_map_ops implementations for a
single device.
Co-developed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Apple SoCs such as the M1 come with multiple embedded co-processors
running proprietary firmware. Communication with those is established
over a simple mailbox using the RTKit IPC protocol.
This cannot be implemented inside the mailbox subsystem since on top
of communication over channels we also need support for starting,
hibernating and resetting these co-processors. We also need to
handle shared memory allocations differently depending on the
co-processor and don't want to split that across multiple drivers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
We want to allow the code inside drivers/soc/apple to be compiled with
COMPILE_TEST but this will currently result in linking errors because
ARCH_APPLE is not set and make will never recurse into
drivers/soc/apple.
Let's just unconditionally recurse into apple/ since all drivers
in there are guarded by config options anyways.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Similar to commit 7f94b69ece ("ARM: ixp4xx: fix compile-testing soc
drivers").
drivers/soc/rockchip/Kconfig makes plenty of provision for configuring
drivers either for ARCH_ROCKCHIP or for COMPILE_TEST. But
drivers/soc/Makefile pulls the rug out from under us, by refusing to
build anything if we specified COMPILE_TEST but not ARCH_ROCKCHIP.
Currently, I'm not aware of anything that breaks without this patch, but
it certainly makes for confusing builds (CONFIG_ROCKCHIP_PM_DOMAINS=y,
but we didn't actually compile the driver?) and leaves room for future
error (I have pending patches that break confusingly with COMPILE_TEST=y
even though their Kconfig dependencies seem correct [1]).
Defer to drivers/soc/rockchip/{Makefile,Kconfig} to do the right thing.
[1] e.g.,
https://lore.kernel.org/linux-rockchip/20220405184816.RFC.2.I2d73b403944f0b8b5871a77585b73f31ccc62999@changeid/
[RFC PATCH 2/2] PM / devfreq: rk3399_dmc: Block PMU during transitions
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220425184503.v3.3.Id5f16dec920f620120c0a143a97a12e16d401760@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It's unclear if these are really needed at all, but seemingly their
purpose is only as a write barrier. Use the general macro instead of the
ARM-specific one.
This driver is partially marked for COMPILE_TEST'ing, but it doesn't
build under non-ARM architectures. Fix this up before *really* enabling
it for COMPILE_TEST.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220426014545.628100-2-briannorris@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are spaces instead of tabs, and other inconsistent indentation.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220426014545.628100-1-briannorris@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Qualcomm sc8280xp platform has 13 and the sa8540p platform has 11
power-domains. Add compatibles, the typically used ones power-domains
and their relevant active-only variants, to the RPMh power-domain
driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-4-bjorn.andersson@linaro.org
In some cases the DT binding will fully describe the set of available
RPMh power-domains, but there is no reason for exposing them all in the
implementation.
Omitting individual data->domains is handle gracefully by
of_genpd_add_provider_onecell(), so there's no reason for printing a
warning when this occurs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-3-bjorn.andersson@linaro.org
PM and PM_GENERIC_DOMAINS configs are required for RZ/N1 SOCs.
Without these configs, the clocks used by the PCI bridge are not
enabled and so accessing the devices leads to a kernel crash:
Unhandled fault: external abort on non-linefetch (0x1008) at 0x90b5f848
Select PM and PM_GENERIC_DOMAINS for ARCH_RZN1
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220422120850.769480-5-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As the potential failure of allocation, devm_kzalloc() may return NULL. Then
the 'pd->pmb' and the follow lines of code may bring null pointer dereference.
Therefore, it is better to check the return value of devm_kzalloc() to avoid
this confusion.
Fixes: 8bcac4011e ("soc: bcm: add PM driver for Broadcom's PMB")
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Using mt8183 MDO0 and SOF0 definition instead of creating new one for
mt8195.
Fixes: 8fdb61f193 ("soc: mediatek: add mtk-mutex support for mt8195 vdosys0")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220425034537.28989-1-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Some boards like the AM335x EVM-SK and AM437x GP EVM provide software
control via a GPIO pin to toggle the DDR VTT regulator to reduce power
consumption in low power states.
The VTT regulator should be disabled after enabling self-refresh on
suspend, and should be enabled before disabling self-refresh on resume.
This is to allow proper self-refresh entry/exit commands to be
transmitted to the memory.
The "ti,vtt-gpio-pin" device tree property in the wkup_m3_ipc node
specifies which GPIO pin to use. This property is communicated to the
Wakeup Cortex M3 co-processor where the actual toggling of the GPIO pin
happens in CM3 firmware [1].
Please note that the GPIO pin must be on the GPIO0 module as that module
is in the wakeup power domain.
[1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/ddr.c?h=08.02.00.006#n190
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
[dfustini: remove the unnecessary "ti,needs-vtt-toggle" property]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220409211215.2529387-3-dfustini@baylibre.com
The mmsys routing table of mt8195 vdosys0 has 2 DITHER components,
so mmsys need to add DDP_COMPONENT_DITHER1 and change all usages of
DITHER enum form DDP_COMPONENT_DITHER to DDP_COMPONENT_DITHER0.
But its header need to keep DDP_COMPONENT_DITHER enum
until drm/mediatek also changed it.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220419094143.9561-7-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
1. Add mt8195 mmsys compatible for 2 vdosys.
2. Add io_start into each driver data of mt8195 vdosys.
3. Add get match data function to identify mmsys by io_start.
4. Add mt8195 routing table settings of vdosys0.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220419094143.9561-2-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one. Client has changed to use the standard callback
machanism and sync dma buffer in client driver, so remove the proprietary
callback in cmdq helper.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Tested-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Link: https://lore.kernel.org/r/1650102868-26219-1-git-send-email-chunkuang.hu@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MSM8974PRO is commonly used for referring to Snapdragon 801, compared to
MSM8974 which is Snapdragon 800.
The Snapdragon 801 has three variants with different clock speeds, with
the -AA, -AB and -AC suffix.
Adjust the names in socinfo to reflect this.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415195449.617040-1-luca@z3ntu.xyz
The allocation funciton devm_kcalloc may fail and return a null pointer,
which would cause a null-pointer dereference later.
It might be better to check it and directly return -ENOMEM just like the
usage of devm_kcalloc in previous code.
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1648107843-29077-1-git-send-email-unSimple1993@163.com
Since omap_prm_id_table all have (and expected to have) data entries,
use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220307033736.2075221-1-chi.minghao@zte.com.cn
Structures in shared memory that can be modified by remote
processors may have untrusted values, they should be validated
before use.
Adding proper validation before using fields of shared
structures.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1646147913-15791-2-git-send-email-quic_deesin@quicinc.com
SMEM driver is IO mapping complete region and CPU is doing a speculative
read into a partition where local HOST does not have permission resulting
in a NOC error.
Map only those partitions which are accessibly to local HOST.
Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1646147913-15791-1-git-send-email-quic_deesin@quicinc.com
The llcc-qcom driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: a3134fb09e ("drivers: soc: Add LLCC driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220408213336.581661-3-bjorn.andersson@linaro.org
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Link: https://lore.kernel.org/r/20220408080853.2494292-1-chi.minghao@zte.com.cn
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Link: https://lore.kernel.org/r/20220324072503.63244-1-jakobkoschel@gmail.com
The rk3566 dwc3 otg port clock is unavailable at boot, as it defaults to
the combophy as the clock source. As combophy0 doesn't exist on rk3566,
we need to set the clock source to the usb2 phy instead.
Add handling to the grf driver to handle this on boot.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220408151237.3165046-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The imx8mn clock list for the ISI lists four clocks, but DOMAIN_MAX_CLKS
was set to 3. Because of this, attempts to enable the fourth clock failed,
threw some splat, and ultimately hung.
Fixes: 7f511d514e ("soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds driver support for all the GPC power domains found on
the i.MX8MP SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PGC control registers in the shared (not per-PGC) region of the
GPC address space have different offsets on i.MX8MP to make space for
additional interrupt control registers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220324072435.63070-1-jakobkoschel@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: c97c4090ff ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 50e9964141 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308071942.22942-1-linmq006@gmail.com
Update the tegra234_reset_sources array to contain all reset sources for
Tegra234 and NULL out the entries that do not actually exist.
Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add nvmem cell lookup entries for below FUSE cells:
- gcplex-config-fuse
- pdi0
- pdi1
Also include the device name prefix "gpu-" in the names of the GPU FUSE
cells in nvmem_cell_info.
Signed-off-by: Sagar Kamble <skamble@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
MT8192 has the same sw0 reset offset as MT8186: add the parameter
to be able to use mmsys as a reset controller for managing at
least the DSI reset line.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220323091932.10648-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
-----BEGIN PGP SIGNATURE-----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=WlR9
-----END PGP SIGNATURE-----
Merge tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over the code and a new piece
of documentation for Intel uncore frequency scaling.
Functionality-wise, the intel_idle driver will support Sapphire Rapids
Xeons natively now (with some extra facilities for controlling
C-states more precisely on those systems), virtual guests will take
the ACPI S4 hardware signature into account by default, the
intel_pstate driver will take the defualt EPP value from the firmware,
cpupower utility will support the AMD P-state driver added in the
previous cycle, and there is a new tracer utility for that driver.
Specifics:
- Allow device_pm_check_callbacks() to be called from interrupt
context without issues (Dmitry Baryshkov).
- Modify devm_pm_runtime_enable() to automatically handle
pm_runtime_dont_use_autosuspend() at driver exit time (Douglas
Anderson).
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural support
for LPI to avoid using it on x86 by mistake (Mario Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver to
work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix up
white space in intel_idle (Rafael Wysocki).
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by default
(David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui)"
* tag 'pm-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (58 commits)
cpufreq: powernow-k8: Re-order the init checks
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
PM: core: keep irq flags in device_pm_check_callbacks()
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
PM: sleep: Add device name to suspend_report_result()
turbostat: fix PC6 displaying on some systems
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend()
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
...
Fix an invalid kfree in mpfs_sys_controller_delete, by replacing the
devm_kzalloc with a regular kzalloc. Change the error handling in the
probe function to free the sys_controller struct if the probe fails.
> cocci warnings: (new ones prefixed by >>)
> >> drivers/soc/microchip/mpfs-sys-controller.c:73:1-6: WARNING: invalid free of devm_ allocated data
Link: https://lore.kernel.org/linux-mm/202203180259.lgIylRZV-lkp@intel.com/
Fixes: d0054a470c ("soc: add microchip polarfire soc system controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <mail@conchuod.ie>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is a third set of fixes for the soc tree, well
within the expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have
new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge
patch that caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65,
Qualcomm sm8450, and Broadcom BCM2711
-----BEGIN PGP SIGNATURE-----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=A4g/
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Add support s4 Power controller. In s4, power control
registers are in secure domain, and should be accessed by smc.
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220307025357.1368673-3-shunzhou.jiang@amlogic.com
There are different software reset registers for difference MTK SoCs.
Therefore, we add a new variable "sw0_rst_offset" to control it.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220217082626.15728-2-rex-bc.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
-----BEGIN PGP SIGNATURE-----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=okza
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vkG6
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.18
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
soc: qcom: rpmpd: Add MSM8226 support
dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
soc: qcom: mdt_loader: Fix split-firmware condition
dt-bindings: arm: msm: Add LLCC compatible for SM8450
dt-bindings: arm: msm: Add LLCC compatible for SM8350
soc: qcom: llcc: Add configuration data for SM8450 SoC
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add support for 16 ways of allocation
soc: qcom: socinfo: Add some more PMICs and SoCs
firmware: qcom: scm: Add support for MC boot address API
firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
cpuidle: qcom-spm: Check if any CPU is managed by SPM
remoteproc: qcom: pas: Add SM8450 remoteproc support
dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
remoteproc: qcom: pas: Carry PAS metadata context
soc: qcom: mdt_loader: Extract PAS operations
...
Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- disable ACP on mt8192
mt8186:
- add support for power domains
- add mmsys and mutex support needed for DRM
- add reset control based on mmsys subsystem
- add pmic wrapper
-----BEGIN PGP SIGNATURE-----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=KUFa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=G//M
-----END PGP SIGNATURE-----
Merge tag 'v5.17-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
- add power domains support for mt8195
- disable ACP on mt8192
mt8186:
- add support for power domains
- add mmsys and mutex support needed for DRM
- add reset control based on mmsys subsystem
- add pmic wrapper
* tag 'v5.17-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
soc: mediatek: pm-domains: Move power status offset to power domain data
soc: mediatek: pm-domains: Remove unused macro
soc: mediatek: pm-domains: Add wakeup capacity support in power domain
dt-bindings: power: Add MT8195 power domains
Link: https://lore.kernel.org/r/16a53482-5a8c-e95e-8cd4-b8304f110987@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MT8186 are highly integrated SoC and use PMIC_MT6366 for
power management. This patch adds pwrap master driver to
access PMIC_MT6366.
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Link: https://lore.kernel.org/r/20220207083034.15327-2-johnson.wang@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In commit d687e056a1 ("soc: mediatek: mmsys: Add mt8192 mmsys routing table"),
the mmsys routing table for mt8192 was introduced but the input selector
for DITHER->DSI0 has no value assigned to it.
This means that we are clearing bit 0 instead of setting it, blocking
communication between these two blocks; due to that, any display that
is connected to DSI0 will not work, as no data will go through.
The effect of that issue is that, during bootup, the DRM will block for
some time, while atomically waiting for a vblank that never happens;
later, the situation doesn't get better, leaving the display in a
non-functional state.
To fix this issue, fix the route entry in the table by assigning the
dither input selector to MT8192_DISP_DSI0_SEL_IN.
Fixes: d687e056a1 ("soc: mediatek: mmsys: Add mt8192 mmsys routing table")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220128142056.359900-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8192 contains an experimental Accelerator Coherency Port
implementation, which does not work correctly but was unintentionally
enabled by default. For correct operation of the GPU, we must set a
chicken bit disabling ACP on MT8192.
Adapted from the following downstream change to the out-of-tree, legacy
Mali GPU driver:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/2781271/5
Note this change is required for both Panfrost and the legacy kernel
driver.
Co-developed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Nick Fan <Nick.Fan@mediatek.com>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220215184651.12168-1-alyssa.rosenzweig@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The code changes address mostly minor problems:
- Several NXP/FSL SoC driver fixes, addressing issues with error
handling and compilation
- Fix a clock disabling imbalance in gpcv2 driver.
- Arm Juno DMA coherency issue
- Trivial firmware driver fixes for op-tee and scmi firmware
The remaining changes address issues in the devicetree files:
- a timer regression for the OMAP devkit8000, which has to use
the alternative timer.
- A hang in the i.MX8MM power domain configuration
- Multiple fixes for the Rockchip RK3399 addressing issues
with sound and eMMC
- Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124
-----BEGIN PGP SIGNATURE-----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=NNpd
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The code changes address mostly minor problems:
- Several NXP/FSL SoC driver fixes, addressing issues with error
handling and compilation
- Fix a clock disabling imbalance in gpcv2 driver.
- Arm Juno DMA coherency issue
- Trivial firmware driver fixes for op-tee and scmi firmware
The remaining changes address issues in the devicetree files:
- A timer regression for the OMAP devkit8000, which has to use the
alternative timer.
- A hang in the i.MX8MM power domain configuration
- Multiple fixes for the Rockchip RK3399 addressing issues with sound
and eMMC
- Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124"
* tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: tegra: Move panels to AUX bus
soc: imx: gpcv2: Fix clock disabling imbalance in error path
soc: fsl: qe: Check of ioremap return value
soc: fsl: qe: fix typo in a comment
soc: fsl: guts: Add a missing memory allocation failure check
soc: fsl: guts: Revert commit 3c0d64e867
soc: fsl: Correct MAINTAINERS database (SOC)
soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY)
soc: fsl: Replace kernel.h with the necessary inclusions
dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a
dt-bindings: qoriq-clock: add missing compatible for lx2160a
ARM: dts: Use 32KiHz oscillator on devkit8000
ARM: dts: switch timer config to common devkit8000 devicetree
tee: optee: fix error return code in probe function
arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required
arm64: dts: imx8mm: Fix VPU Hanging
ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
ARM: dts: rockchip: reorder rk322x hmdi clocks
firmware: arm_scmi: Remove space in MODULE_ALIAS name
arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
...
dsafsdfd0054 ("soc: add microchip polarfire soc system controller")
incorrectly exported mpfs_sys_controller_put. Remove the export and make
the function static instead. This fixes the "no previous prototype
for 'mpfs_sys_controller_put'" warning spotted by the kernel test robot.
Fixes: d0054a470c ("soc: add microchip polarfire soc system controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <mail@conchuod.ie>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains the final bit to enable advanced power management on
Tegra20 and Tegra30. It also contains some cleanups and wake event
support on Tegra234.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmIZBUETHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zodJ7D/iKg/aP3rroIzzISWfB1t2GcT98RaI9
8CnJ7ywKqf5lDCNuRGm8La4IyXewfTfzXK/r6RninlljonGVbaalVQk4uJgiXkkP
m50/SpYqUGnT2bPfO5JByJCTUdDmzzIcAWpAw53Cs0OLgr9aMyIpmpyn5vwfRDY6
9UQQokaDFKuCwr71QZv3EEl8V840cazopp89Q5C1ivHW2uwSG6sjojTIsB9Rxr5x
C+WqP48mSrDZ9pB+qx8uszb7d3SolYH7lOfWyMzPhnCXy7hyoVcAYcywt5JIoBQ1
t+FtRoJ5e3bShJyhHDU3vdRV6R2hD0V1BHOLpiZmDzQYZtTIHYdKnnRe7VTtFSQK
rFHz1+LQeI1b3pZTmY1HtUO8XIUo01NdMOh84RQx5U5Fp7zgBrsp7e0TV1BLhx6r
fACZCeFnFvt8bFVJYBxun5hV5pfByqqh7G432D+DXpyCvwPe6p6a8frewWDr/4M3
e89T9pU3MNahLC7R97Tfs1JvkQijXuW/yPU505Y6sCFzwzvXyF3axE4ERYJN8yT8
2iev8As/CGwTGtU1glYCd0U/gvsZwJdlxxepCSitaxNxl2EUwlhZo68UM4SG45vb
bWFXfWe+hXHIDz7RS1E5D/00nhqoN9ZBldteDit6UenoK4Ys3s6ExZwYSd6zxWsX
NEWkUTW6kBqu
=Jmv9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=26qK
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.18-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.18-rc1
This contains the final bit to enable advanced power management on
Tegra20 and Tegra30. It also contains some cleanups and wake event
support on Tegra234.
* tag 'tegra-for-5.18-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: bpmp: cleanup double word in comment
soc/tegra: pmc: Add Tegra234 wake events
soc/tegra: fuse: Explicitly cast to/from __iomem
soc/tegra: fuse: Update nvmem cell list
soc/tegra: pmc: Enable core domain support for Tegra20 and Tegra30
Link: https://lore.kernel.org/r/20220225164741.1064416-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add MTK mutex support for MT8186 SoC.
We need MTK mutex to control timing of display modules and there
are two display pipelines for MT8186 including internal and external
display.
MTK mutex for internal display:
- Timing source: DSI
- Control modules: OVL0/RDMA0/COLOR0/CCORR/AAL0/GAMMA/POSTMASK0/DITHER
MTK mutex for external display:
- Timing source : DPI
- Control modules: OVL_2L0/RDMA1
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add new routing table for MT8186.
In MT8186, there are two routing pipelines for internal and external
display.
Internal display: OVL0->RDMA0->COLOR0->CCORR0->AAL0->GAMMA->POSTMASK0->
DITHER->DSI0
External display: OVL_2L0->RDMA1->DPI0
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add domain control data including bus protection data size
change due to more protection steps in mt8195.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220130012104.5292-6-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8195 has more than 32 power domains so it needs
two set of pwr_sta and pwr_sta2nd registers,
so move the register offset from soc data into power domain data.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220130012104.5292-5-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Due to clk resource data will be allocated dynamically by
searching parent count of clk in power domain node, so remove
the unused marco MAX_SUBSYS_CLKS for static allocation.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220130012104.5292-4-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Due to some power domain needs to keep on for wakeup in system suspend,
so add GENPD_FLAG_ACTIVE_WAKEUP support in Mediatek power domain driver.
Fixes: 59b644b01c ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220130012104.5292-3-chun-jie.chen@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
- Drop LS1021A device check from soc-imx driver as it's unneeded since
commit commit 4ebd29f916 ("soc: imx: Register SoC device only on
i.MX boards").
- Add support for power domains provided by the VPU blk-ctrl on the
i.MX8MQ.
- Add resource owner management API which will be used to check whether
M4 is under control of Linux.
- Add VPU MU resources support into SCU power domain driver.
- Support DT overlay for WEIM bus driver with OF reconfiguration
notifier handler.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmIUirsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM54UQf/UzYym4Y/Clur4F7xh4XodaP6Y2fF
M7DJUcE7rkI4jHCASnyh7NwSdqLCBiXOa6GVMpagELG8qoMYV/Gcwdt2Q60tn8TM
ASADkSKobjDF7hywQpGQL9808QTKglRwgVBnTgeKaUrjE1Lw0gebgM9qoisrUzjk
wwQxnUdyNxkeCOw5743z28H+lJmC8j3EecD+mjN6DiqCJYIMacQQ3+7S0pyHq2ii
TdaV0oi4ApannwlxcguqYDDgwX7VXxnguPmGVIHc8Pq+zqmbCTfcaUbRTwlYX4PK
5CCb+2sN8v0MYxKH5elYuUoMQeTZ2w7IeK99JDoCNueNbIbK6G7wndHfdQ==
=m1lO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=N5wZ
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.18:
- Drop LS1021A device check from soc-imx driver as it's unneeded since
commit commit 4ebd29f916 ("soc: imx: Register SoC device only on
i.MX boards").
- Add support for power domains provided by the VPU blk-ctrl on the
i.MX8MQ.
- Add resource owner management API which will be used to check whether
M4 is under control of Linux.
- Add VPU MU resources support into SCU power domain driver.
- Support DT overlay for WEIM bus driver with OF reconfiguration
notifier handler.
* tag 'imx-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: add DT overlay support for WEIM bus
firmware: imx: scu-pd: imx8q: add vpu mu resources
firmware: imx: add get resource owner api
soc: imx: imx8m-blk-ctrl: add i.MX8MQ VPU blk-ctrl
dt-bindings: power: imx8mq: add defines for VPU blk-ctrl domains
soc: imx: Remove Layerscape check
Link: https://lore.kernel.org/r/20220222075226.160187-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- sama7g5: CPU idle support with CPUFreq operating points defined in DT
- polarfire: addition of the soc system controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYhjItwAKCRAfOrpwrNPN
DDLmAP9CKK9j0y3YEs69vXYO4URTc5FrpRdZ976mHZdvl5ZJpQD/SK8k/AZhVwsV
OUMN8zosXY0TiCRjsaLPq6MK9Nv09QA=
=alh4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VBoe
-----END PGP SIGNATURE-----
Merge tag 'at91-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/soc
AT91 & POLARFIRE SoC #1 for 5.18:
- sama7g5: CPU idle support with CPUFreq operating points defined in DT
- polarfire: addition of the soc system controller
* tag 'at91-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
Link: https://lore.kernel.org/r/20220225121943.71494-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Tegra RTC alarm and power key wake-ups for Tegra234
Signed-off-by: kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver provides an interface for other drivers to access the
functions of the system controller on the Microchip PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220217101349.2374873-2-conor.dooley@microchip.com
- Changed the locking scheme (Daniel Lezcano)
- Fixed dtpm_cpu cleanup at exit time and missing virtual dtpm pointer
release (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmIWg2YACgkQqDIjiipP
6E8kYAf/YGJpBz5tWEUyGZWD4kPHxDiij6mu++qrXmRSBR3Baozq94WaR7wynC3U
DNo9Zw3dJ4H9t7YtxDKdSV93oeKD5erXllqkLiq1lhNQR50p3gL3rypbR4VCr5y0
B7scPdBtHuLuFU3TPZTkmzF2krsncH4WdhcIm4/h6jrvYDkCs9v4fEHqujgmBtFa
4yB6EoZQp+9hUcjQUkVwolpCW6BlkSOaIIabzEiuBfLs+6Hy64RIzguMo3yg036P
88ed1o7tvK/bV3aLXQ1UufUadhaxkMp/mdBuJ3lUaRiJyeYtVR9EKlxa7/0bNzc5
N+ZAlpzqAY7q/1/J7wL7gIo7g1ZeFQ==
=5pr0
-----END PGP SIGNATURE-----
Merge tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux
Pull DTPM (Dynamic Thermal Power Management) changes for 5.18-rc1 from
Daniel Lezcano:
"- Added dtpm hierarchy description (Daniel Lezcano)
- Changed the locking scheme (Daniel Lezcano)
- Fixed dtpm_cpu cleanup at exit time and missing virtual dtpm pointer
release (Daniel Lezcano)"
* tag 'dtpm-v5.18' of https://git.linaro.org/people/daniel.lezcano/linux:
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array
sparse is picky about casts between different address spaces. A cast to
plain void * needs to be accompanied by a __force modifier and casting
back to void __iomem * needs to be explicit to avoid warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 88724b78a8 ("soc/tegra: fuse: Use resource-managed helpers")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update tegra_fuse_cells with below entries:
- gcplex-config-fuse:
Configuration bits for GPU, used to enable/disable write protected
region used for storing GPU firmware.
- pdi0:
Unique per chip public identifier.
- pdi1:
Unique per chip public identifier.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All device drivers got runtime PM and OPP support. Flip the core domain
support status for Tegra20 and Tegra30 SoCs.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Renesas RZ/G2L, RZ/G2LC, RZ/G2UL and RZ/V2L SoCs have identical IP
blocks for which drivers are common. To avoid updating the Kconfig
files for drivers in common to each SoC, introduce the ARCH_RZG2L config
option.
The ARCH_RZG2L config option will be selected by the above mentioned
SoCs, and the ARCH_RZG2L config option will be used as a dependency for
the drivers in common.
While at it, move PM and PM_GENERIC_DOMAINS under the ARCH_RZG2L config
option instead of keeping it for individual SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220224092114.25737-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The updated condition checking if a segment can be found in the loaded
firmware blob, or need to be loaded from a separate file, incorrectly
classifies segments that ends at the end of the loaded blob. The result
is that the mdt loader attempts to load the segment from a separate
file.
Correct the conditional to use the loaded segment instead.
Fixes: ea90330fa3 ("soc: qcom: mdt_loader: Extend check for split firmware")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220215034819.1209367-1-bjorn.andersson@linaro.org
The dtpm hierarchy can now be removed with the
dtpm_destroy_hierarchy() function. Add the module_exit() callback so
the module can be unloaded by removing the previously created
hierarchy.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-7-daniel.lezcano@linaro.org
Explicitly select PM and PM_GENERIC_DOMAINS configs for ARCH_R9A07G044
and ARCH_R9A07G054 configs. PM and PM_GENERIC_DOMAINS configs are
required for RZ/{G2L,V2L} SoC without these configs the SMARC EVK's
won't boot.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220221222450.5393-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The imx_pgc_power_down() starts by enabling the domain clocks, and thus
disables them in the error path. Commit 18c98573a4 ("soc: imx: gpcv2:
add domain option to keep domain clocks enabled") made the clock enable
conditional, but forgot to add the same condition to the error path.
This can result in a clock enable/disable imbalance. Fix it.
Fixes: 18c98573a4 ("soc: imx: gpcv2: add domain option to keep domain clocks enabled")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.
Fixes: 7aa1aa6ece ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The double `is' in the comment in line 150 is repeated. Remove one
of them from the comment. Also removes a redundant tab in a new line.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
If 'devm_kstrdup()' fails, we should return -ENOMEM.
While at it, move the 'of_node_put()' call in the error handling path and
after the 'machine' has been copied.
Better safe than sorry.
Fixes: a6fc3b6981 ("soc: fsl: add GUTS driver for QorIQ platforms")
Depends-on: fddacc7ff4dd ("soc: fsl: guts: Revert commit 3c0d64e867ed")
Suggested-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This reverts commit 3c0d64e867
("soc: fsl: guts: reuse machine name from device tree").
A following patch will fix the missing memory allocation failure check
instead.
Suggested-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
A collection of small patches, mostly for old and new regressions
and device-specific fixes.
- Regression fixes regarding ALSA core SG-buffer helpers
- Regression fix for Realtek HD-audio mutex deadlock
- Regression fix for USB-audio PM resume error
- More coverage of ASoC core control API notification fixes
- Old regression fixes for HD-audio probe mask
- Fixes for ASoC Realtek codec work handling
- Other device-specific quirks / fixes
-----BEGIN PGP SIGNATURE-----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=/LCk
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small patches, mostly for old and new regressions and
device-specific fixes.
- Regression fixes regarding ALSA core SG-buffer helpers
- Regression fix for Realtek HD-audio mutex deadlock
- Regression fix for USB-audio PM resume error
- More coverage of ASoC core control API notification fixes
- Old regression fixes for HD-audio probe mask
- Fixes for ASoC Realtek codec work handling
- Other device-specific quirks / fixes"
* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ASoC: intel: skylake: Set max DMA segment size
ASoC: SOF: hda: Set max DMA segment size
ALSA: hda: Set max DMA segment size
ALSA: hda/realtek: Fix deadlock by COEF mutex
ALSA: usb-audio: Don't abort resume upon errors
ALSA: hda: Fix missing codec probe on Shenker Dock 15
ALSA: hda: Fix regression on forced probe mask option
ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
ASoC: wm_adsp: Correct control read size when parsing compressed buffer
ASoC: qcom: Actually clear DMA interrupt register for HDMI
ALSA: memalloc: invalidate SG pages before sync
ALSA: memalloc: Fix dma_need_sync() checks
MAINTAINERS: update cros_ec_codec maintainers
ASoC: rt5682: do not block workqueue if card is unbound
ASoC: rt5668: do not block workqueue if card is unbound
ASoC: rt5682s: do not block workqueue if card is unbound
ASoC: tas2770: Insert post reset delay
ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
...
More fixes that have arrived in the past few -rcs, plus a MAINTAINERS
update. The biggest update here is the fix for control change
notifications in ASoC generic controls found by mixer-test.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmIKgz8ACgkQJNaLcl1U
h9Conwf6A3asUY/E6bxnHR82zjXlTi9h8o4gpduu1v38J+npn37cSz7w50AZq2o3
SCbedB5LuZpGRKgP9tXPR3jqmXDwBH2D7cazISXLXLq8CKMHxuGuvY6vxaw7x+xz
T7MIinNr9FGn5uqrTmmucRj7YyxA4YRQteQTRq5ixjUW/XvdIXcmOVY0ZO+P09Iq
RBAZFtqNOh+AEdKddEfG3yykm1gU6rhvZM52KeJds22MSVCpQSYRe64yIwizERFr
Jcb3qfuDtrVx0WaIW8H4jxfrHUw4ZbVs8ut2Z7fUwG2S1tiR88uNYiQ1uoMKAdQT
WKLx/No3uLk2hZ8UszPc6KUqcrbGRA==
=FeYQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
More fixes that have arrived in the past few -rcs, plus a MAINTAINERS
update. The biggest update here is the fix for control change
notifications in ASoC generic controls found by mixer-test.
If we access the syscon (expansion bus config registers) using the
syscon regmap instead of relying on direct accessor functions,
we do not need to call this static code in the machine
(arch/arm/mach-ixp4xx/common.c) which makes things less dependent
on custom machine-dependent code.
Look up the syscon regmap and handle the error: this will make
deferred probe work with relation to the syscon.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220211223238.648934-8-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds the necessary bits to drive the VPU blk-ctrl on the i.MX8MQ, to
avoid putting more of this functionality into the decoder driver.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Newer LLCC HW have different register offsets for several registers,
currently of which LLCC hardware info and status are used to identify
the LLCC version information and other data. So use separate table to
keep track of these register offsets which vary by different LLCC HW
versions and eases any future addition in variations of register offsets
for newer hardware.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/c655d16d945aef2d7fc8e7c212f3e1c58a84eb95.1643355594.git.quic_saipraka@quicinc.com
Newer SoCs with LLCC IP version 2.1.0.0 and later support write
sub-cache cacheable feature. Use a separate llcc_slice_config member
"write_scid_cacheable_en" to identify this feature and program
LLCC_TRP_SCID_WRSC_CACHEABLE_EN register to enable it.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/83372c8178f579d055ec58212ce5af5d55abadd4.1643355594.git.quic_saipraka@quicinc.com
LLCC HW version info is made up of major, branch, minor and echo
version bits each of which are 8bits. Several features in newer
LLCC HW are based on the full version rather than just major or
minor versions such as write-subcache enable which is applicable
for versions v2.0.0.0 and later, also upcoming write-subcache
cacheable for SM8450 SoC which is only present in versions v2.1.0.0
and later, so it makes it easier and cleaner to just directly
compare with the full version than adding additional major/branch/
minor/echo version checks. So remove the earlier major version check
and add full version check for those features.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/a82d7c32348c51fcc2b63e220d91b318bf706c83.1643355594.git.quic_saipraka@quicinc.com
Add SM8350, SC8280XP, SA8540P and one more SM8450 and various PMICs
found on boards on these platforms to the socinfo driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220210051043.748275-1-bjorn.andersson@linaro.org
Once we added support in the dpaa2-eth for driver level software TSO we
observed the following situation: if the EQCR CI (consumer index) is
read from the cache-enabled area we sometimes end up with a computed
value of available enqueue entries bigger than the size of the ring.
This eventually will lead to the multiple enqueue of the same FD which
will determine the same FD to end up on the Tx confirmation path and the
same skb being freed twice.
Just read the consumer index from the cache inhibited area so that we
avoid this situation.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 9de2b9286a ("ASoC: mediatek: Check for error clk
pointer").
With this patch in the tree, Chromebooks running the affected hardware
no longer boot. Bisect points to this patch, and reverting it fixes
the problem.
An analysis of the code with this patch applied shows:
ret = init_clks(pdev, clk);
if (ret)
return ERR_PTR(ret);
...
for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
struct clk *c = clk[data->clk_id[j]];
if (IS_ERR(c)) {
dev_err(&pdev->dev, "%s: clk unavailable\n",
data->name);
return ERR_CAST(c);
}
scpd->clk[j] = c;
}
Not all clocks in the clk_names array have to be present. Only the clocks
in the data->clk_id array are actually needed. The code already checks if
the required clocks are available and bails out if not. The assumption that
all clocks have to be present is wrong, and commit 9de2b9286a ("ASoC:
mediatek: Check for error clk pointer") needs to be reverted.
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Reported-by: Daniel Golle <daniel@makrotopia.org>
Fixes: 9de2b9286a ("ASoC: mediatek: Check for error clk pointer")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220207160923.3911501-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a checking code when it gets -EPROBE_DEFER while getting a clock
resource. In this case, it doesn't need to print out an error message
because the probing will be re-visited.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20211104173709.222912-1-jae.hyun.yoo@intel.com
Link: https://lore.kernel.org/r/20220201070118.196372-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As per RZ/G2L HW manual (Rev.1.00 Sep, 2021) DEV_ID [31:28] indicates
product revision. Use this information to populate the revision info
for RZ/G2L family.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220121014117.21248-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DTPM framework does support now the hierarchy description.
The platform specific code can call the hierarchy creation function
with an array of struct dtpm_node pointing to their parent.
This patch provides a description of the big / Little CPUs and the
GPU and tie them together under a virtual 'package' name. Only rk3399 is
described now.
The description could be extended in the future with the memory
controller with devfreq.
The description is always a module and it describes the soft
dependencies. The userspace has to load the softdeps module in the
right order.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by; Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220128163537.212248-6-daniel.lezcano@linaro.org
Rather than passing a boolean to indicate if the PAS operations should
be performed from within __mdt_load(), extract them to their own helper
function.
This will allow clients to invoke this directly, with some
qcom_scm_pas_metadata context that they later needs to release, without
further having to complicate the prototype of qcom_mdt_load().
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-9-bjorn.andersson@linaro.org
After spelunking various old kernel trees no finds has been found
indicating that the PAS mem_setup call should actually be made
conditional on the image being relocatable.
Group the two PAS operations together, to facilitate splitting them out
in a following patch.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-8-bjorn.andersson@linaro.org
Move the traversal of the program headers to the start of the function,
to make sure that min_ and max_addr are in scope as the call to
qcom_scm_pas_mem_setup() is moved in the next commit.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-7-bjorn.andersson@linaro.org
Some of the Qualcomm SM8450 firmware files are padded such that the
start of the first segment falls within the .mdt file but the segment to
be loaded is stored as a separate .bNN file.
Extend the condition to only attempt to read a segment inline if the
entire segment would be available.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-6-bjorn.andersson@linaro.org
It's been observed that some firmware found on Qualcomm SM8450 devices
carries the hash segment as the last segment in the ELF. Extend the
support to allow picking the hash from any segment in the MDT/MBN.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-5-bjorn.andersson@linaro.org
It's been observed that some firmware found in a Qualcomm SM8450 device
has the hash table in a separate .bNN file. Use the newly extracted
helper function to load this segment from the separate file, if it's
determined that the hashes are not part of the already loaded firmware.
In order to do this, the function needs access to the firmware basename
and to provide more useful error messages a struct device to associate
the errors with.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-4-bjorn.andersson@linaro.org
Spotted in a SM8450 device, the hash metadata segment is split out in a
separate .bNN file which means that the logic for loading split out
segmenents needs to be duplicated in qcom_mdt_read_metadata().
Split out the existing logic to a helper function that can be used in
both code paths.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-3-bjorn.andersson@linaro.org
Starting with Qualcomm SM8450, some new security enhancements has been
done in the secure world, which results in the requirement to keep the
metadata segment accessible by the secure world from init_image() until
auth_and_reset().
Introduce a "PAS metadata context" object that can be passed to
init_image() for tracking the mapped memory and a related release
function for client drivers to release the mapping once either
auth_and_reset() has been invoked or in error handling paths on the way
there.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220128025513.97188-2-bjorn.andersson@linaro.org
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: cdd5de500b ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Link: https://lore.kernel.org/r/20220114062840.16620-1-linmq006@gmail.com
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
While at it return 0 instead of returning ret in the probe success path.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220105180323.8563-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of the irq. For "normal" kernels
(without forced threading) then, if there is no thread_fn, then
IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate for this driver
because it calls wake_up_all() and this API cannot be called from
no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers
sleeping-while-atomic warnings).
Fix this by removing IRQF_ONESHOT.
Fixes: 2209481409 ("soc: qcom: Add AOSS QMP driver")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[bjorn: Added Fixes tag]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220127173554.158111-1-daniel.thompson@linaro.org
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220114085019.42904-1-vulab@iscas.ac.cn
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling paths.
Fixes: 8c75d585b9 ("soc: qcom: aoss: Expose send for generic usecase")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108095931.21527-1-linmq006@gmail.com
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 01f937ffc4 ("soc: qcom: ocmem: don't return NULL in of_get_ocmem")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220107073126.2335-1-linmq006@gmail.com
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes: bbe3a66c3f ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211231094419.1941054-1-jiasheng@iscas.ac.cn
Since commit 4ebd29f916 ("soc: imx: Register SoC device only on i.MX
boards") the soc-imx driver is only registered on i.MX platforms as
intended.
This means that we no longer need to do a specific check for
Layerscape.
Remove the now unneeded "fsl,ls1021a" check.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The proper name is Exynos Auto V9, not V0. It was the typo slipped in
unnoticed, fix it.
Fixes: b603377e40 ("soc: samsung: Add USI driver")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220114144606.24358-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
The config SYSCON never existed in the kernel repository; so, the select of
that config in ./drivers/soc/canaan/Kconfig has no effect.
Presumably, this was just some mistake, assuming some symmetry in handling
and naming of configs that simply does not exist.
Remove this useless select of a non-existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
cpumask_first() is a more effective analogue of 'next' version if n == -1
(which means start == 0). This patch replaces 'next' with 'first' where
things look trivial.
There's no cpumask_first_zero() function, so create it.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
find_first{,_zero}_bit is a more effective analogue of 'next' version if
start == 0. This patch replaces 'next' with 'first' where things look
trivial.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Here is the large set of char, misc, and other "small" driver subsystem
changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the full
details.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z
hMr9mISG4r6g4PvjrJBj
=9May
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char, misc, and other "small" driver
subsystem changes for 5.17-rc1.
Lots of different things are in here for char/misc drivers such as:
- habanalabs driver updates
- mei driver updates
- lkdtm driver updates
- vmw_vmci driver updates
- android binder driver updates
- other small char/misc driver updates
Also smaller driver subsystems have also been updated, including:
- fpga subsystem updates
- iio subsystem updates
- soundwire subsystem updates
- extcon subsystem updates
- gnss subsystem updates
- phy subsystem updates
- coresight subsystem updates
- firmware subsystem updates
- comedi subsystem updates
- mhi subsystem updates
- speakup subsystem updates
- rapidio subsystem updates
- spmi subsystem updates
- virtual driver updates
- counter subsystem updates
Too many individual changes to summarize, the shortlog contains the
full details.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
dt-bindings: mux: Document mux-states property
dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
counter: remove old and now unused registration API
counter: ti-eqep: Convert to new counter registration
counter: stm32-lptimer-cnt: Convert to new counter registration
counter: stm32-timer-cnt: Convert to new counter registration
counter: microchip-tcb-capture: Convert to new counter registration
counter: ftm-quaddec: Convert to new counter registration
counter: intel-qep: Convert to new counter registration
counter: interrupt-cnt: Convert to new counter registration
counter: 104-quad-8: Convert to new counter registration
counter: Update documentation for new counter registration functions
counter: Provide alternative counter registration functions
counter: stm32-timer-cnt: Convert to counter_priv() wrapper
counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
counter: ti-eqep: Convert to counter_priv() wrapper
counter: ftm-quaddec: Convert to counter_priv() wrapper
counter: intel-qep: Convert to counter_priv() wrapper
counter: microchip-tcb-capture: Convert to counter_priv() wrapper
...
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
Treewide cleanup and consolidation of MSI interrupt handling in
preparation for further changes in this area which are necessary to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space
-----BEGIN PGP SIGNATURE-----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=vKzd
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI irq updates from Thomas Gleixner:
"Rework of the MSI interrupt infrastructure.
This is a treewide cleanup and consolidation of MSI interrupt handling
in preparation for further changes in this area which are necessary
to:
- address existing shortcomings in the VFIO area
- support the upcoming Interrupt Message Store functionality which
decouples the message store from the PCI config/MMIO space"
* tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits)
genirq/msi: Populate sysfs entry only once
PCI/MSI: Unbreak pci_irq_get_affinity()
genirq/msi: Convert storage to xarray
genirq/msi: Simplify sysfs handling
genirq/msi: Add abuse prevention comment to msi header
genirq/msi: Mop up old interfaces
genirq/msi: Convert to new functions
genirq/msi: Make interrupt allocation less convoluted
platform-msi: Simplify platform device MSI code
platform-msi: Let core code handle MSI descriptors
bus: fsl-mc-msi: Simplify MSI descriptor handling
soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()
soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation
NTB/msi: Convert to msi_on_each_desc()
PCI: hv: Rework MSI handling
powerpc/mpic_u3msi: Use msi_for_each-desc()
powerpc/fsl_msi: Use msi_for_each_desc()
powerpc/pasemi/msi: Convert to msi_on_each_dec()
powerpc/cell/axon_msi: Convert to msi_on_each_desc()
powerpc/4xx/hsta: Rework MSI handling
...
As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms.
All the newly supported SoCs belong into existing families
this time:
- Qualcomm gets support for two newly announced platforms, both
of which can now work in production environments: the SDX65
5G modem that can run a minimal Linux on its Cortex-A7 core,
and the Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3
family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread
i.MX8 series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that
we have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013,
while MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two
new SoCs, plus a number of Chromebook variants and phones based
on the Snapdragon 7c, 845 and 888 SoCs, including various
Sony Xperia devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit
chips out of the box, including a number of ASUS Transformer
tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top
box based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908.
-----BEGIN PGP SIGNATURE-----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=IF3G
-----END PGP SIGNATURE-----
Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----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=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
Yes, you are right and now the return code depending on the
init_clks().
Fixes: 6078c65194 ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211222015157.1025853-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This introduces RPM power-domain support for the SM8450, SM6125 and
QCM2290 platforms. It them clean up the platform-based naming of the
resources definitions throughout the RPMh PD driver.
The last-level cache controller driver gains SM8350 support.
The RPM sleep stats driver gains support for several older systems that
had a slightly different memory layout for this information.
The socinfo gains SM8450, SM6350 and SM7227 definitions.
In addition to the DeviceTree binding updates related to these changes
new compatibles was added to describe the SM8450 and the Kryo 780 CPU.
Lastly a few typo and style fixes are introduced.
-----BEGIN PGP SIGNATURE-----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=ovup
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NlpZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.17
This introduces RPM power-domain support for the SM8450, SM6125 and
QCM2290 platforms. It them clean up the platform-based naming of the
resources definitions throughout the RPMh PD driver.
The last-level cache controller driver gains SM8350 support.
The RPM sleep stats driver gains support for several older systems that
had a slightly different memory layout for this information.
The socinfo gains SM8450, SM6350 and SM7227 definitions.
In addition to the DeviceTree binding updates related to these changes
new compatibles was added to describe the SM8450 and the Kryo 780 CPU.
Lastly a few typo and style fixes are introduced.
* tag 'qcom-drivers-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
Link: https://lore.kernel.org/r/20211221040452.3620633-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Both SoCs are known as 'lagoon' downstream. Add their ids to the socinfo
driver.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213081111.20217-1-luca.weiss@fairphone.com
Sort all power-domain defines and the SoC specific lists in
alphabetical order for better readability.
No functional changes.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-5-git-send-email-quic_rjendra@quicinc.com
The requirement to specify the active + sleep and active-only MX
power-domains as the parents of the corresponding CX power domains is
not applicable on sc7280. Fix it by using the cx/cx_ao structs for
sc7280 instead of the _w_mx_parent ones.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-4-git-send-email-quic_rjendra@quicinc.com
The rpmhpd structs were named with a SoC-name prefix, but then
they got reused across multiple SoC families making things confusing.
Rename all the struct names to remove SoC-name prefixes.
While we do this we end up with some power-domains without parents,
and some with and at times different parents across SoCs.
use a _w_<parent-name>_parent suffix for such cases.
No functional change as part of this patch.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1639063917-9011-3-git-send-email-quic_rjendra@quicinc.com
Add the power domains exposed by RPMH in the Qualcomm SM8450 platform.
Unlike previous generations CX domain is not a child of MX domain.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201072745.3969077-7-vkoul@kernel.org
Update max processor count to reflect the number of co-processors on
SM8450 SoCs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201072745.3969077-5-vkoul@kernel.org
The only usage of qmp_cooling_device_ops is to pass its address to
devm_thermal_of_cooling_device_register() which takes a pointer to const
struct thermal_cooling_device_ops as argument. Make it const to allow
the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211128210317.25504-1-rikard.falkeborn@gmail.com
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn
Not all RPM firmware versions have the dynamic sleep stats offset
available. Most older versions use a fixed offset of 0xdba0.
Add support for this using new SoC-specific compatibles for APQ8084,
MSM8226, MSM8916 and MSM8974.
Even older SoCs seem to use a different offset and stats format.
If needed those could be supported in the future by adding separate
compatibles for those with a different stats_config.
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211119213953.31970-3-stephan@gerhold.net
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmHAa1EQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1+/HEACSadLl5gVkHa2IDfnG5q8b0rWK2/qLNsKR
YTLDB3XnLWMEZs7TMDqT6OtTKaQSJOlUAVKL5ZkZ9W0DNcG0mWcMdIPJ2HH8nv9Q
oVwJnOpDVFRal/zligg6JO1Rwly9ZFJryg5o1k3Ii979wzRf5v4Wu/d7PdVQ53VB
tmeL2tCE9Cf3LlnGi1Pnjcr9c/Jab62XFTXb/Hp62tXhtfCysVktaVLilTEnVP6D
VJm842bLVLLGYmerUe7XvnmL7cpN07VzCCXl8QtiXQ92Sgf4hSLmn7CcwyfkVl0O
vEhK8CrHgx4TenDUnF6DGec/64H+1f26BN0APbJWwoLX7jt595yZspmGhsHL6gmE
lLNnl0mey5ExuNJTlEXpt4DJNjElA7s6C6kizoFwtIsdJWpnxLM+TB9CuqG2rS0o
nRqEX1uIEYYIx4y3LK334Sctwnh0J90J40LrOzRNII2fwDa5THsckudgxCitUi+0
xeX8NelVCAZrrzVWydCrDim7cT/VHPE1BC97vcVcViFFFjJt1clwn+gajGz7ffrt
zm+XjubkaGWr81GivQK+axmZhg78229RjY2TYjFiDy7sPUnbDpT3JRxLv1Nh/xh8
7nrzZoy0sZTdJ4j4n1+UkykoOzWJ96GifqIlqZBPOIHhVC0zSgGQFrQ8hKF1fdWb
2BqdvGErUg==
=2Ed8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pxdx
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.17
1. Exynos ChipID: add Exynos7885 support.
2. Exynos PMU: add Exynos850 support.
3. Minor bindings cleanup.
4. Add Exynos USIv2 (Universal Serial Interface) driver. The USI block is
a shared IP block between I2C, UART/serial and SPI. Basically one has
to choose which feature the USI block will support and later the
regular I2C/serial/SPI driver will bind and work.
This merges also one commit with dt-binding headers from my dts64
pull request.
Together with a future serial driver change, this will break the ABI.
Affected: Serial on ExynosAutov9 SADK and out-of-tree ExynosAutov9 boards
Why: To properly and efficiently support the USI with new hierarchy
of USI-{serial,SPI,I2C} devicetree nodes.
Rationale:
Recently added serial and USI support was short-sighted and did not
allow to smooth support of other features (SPI and I2C). Adding
support for USI-SPI and USI-I2C would effect in code duplication.
Adding support for different USI versions (currently supported is
USIv2 but support for v1 is planned) would cause even more code
duplication and create a solution difficult to maintain.
Since USI-serial and ExynosAutov9 have been added recently, are
considered fresh development features and there are no supported
products using them, the code/solution is being refactored in
non-backwards compatible way. The compatibility is not broken yet.
It will be when serial driver changes are accepted.
The ABI break was discussed with only known users of ExynosAutov9 and
received their permission.
* tag 'samsung-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: keep SoC driver bindings together
soc: samsung: Add USI driver
dt-bindings: soc: samsung: Add Exynos USI bindings
soc: samsung: exynos-pmu: Add Exynos850 support
dt-bindings: samsung: pmu: Document Exynos850
soc: samsung: exynos-chipid: add Exynos7885 SoC support
soc: samsung: exynos-chipid: describe which SoCs go with compatibles
Link: https://lore.kernel.org/r/20211220115405.30434-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9dygUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7+jwgAle7/Po7Qs0JVrUwkJOWAjNxveXjv
keEC5o+svPOLIToX1lA+bY2CKlok2n6IIiEkpbgc+C+prTip0zJnJUFFHxuOeMkl
+/EWTthCAddLwXCdmU6c5HSw8XJ9rkH3YDvd46GkPnZuUiZVVmTYkuZQ25qCbPpE
f1kCg2RNVruZAOYHmMsoU+WMH3q40dvGSDVXbcHpNZ19qHooUyk/4jcXGlBJKXDo
iGosWLdqMy0vbK4cWFzorPFyTpaF1qq/o7AppfexT1h0f6aLnuKnBA5JXY4y4bvd
e+6EZ0VwvtdZBqMNaZLHqltCVA/Y0q2gXGryKUM6n7mGdv/LYictLHPudA==
=WKrF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=74GG
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.17:
- A number of patches from Adam Ford to update gpcv2 and blk-ctrl driver
to keep i.MX8MM VPU-H1 and i.MX8MN GPUMIX bus clocks active, and add
i.MX8MN display related domain support.
- Add optional continuous burst clock support for imx-weim bus driver.
- Call pm_runtime_put_sync_suspend() instead of pm_runtime_put() in
gpcv2 driver to prevent a sequence issue seen with i.MX8MM GPU and
MIX domain.
* tag 'imx-drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
bus: imx-weim: optionally enable continuous burst clock
soc: imx: gpcv2: keep i.MX8MM VPU-H1 bus clock active
soc: imx: gpcv2: Synchronously suspend MIX domains
Link: https://lore.kernel.org/r/20211218071427.26745-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This set of changes contains some preparatory work that is shared by
several branches and trees to support DVFS via power domains.
There's also a bit of cleanup and improvements to reboot on chips that
use PSCI.
-----BEGIN PGP SIGNATURE-----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=f+T3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAh0oACgkQmmx57+YA
GNkwHhAAo+oITzjXFoHwCw97u6xOv9CxH6OFRSz2kbxBGHtniGx/lg7cxTIif4HX
4bnvUv3nQqoRMJ2hlGXp0QCjfXVTJXnk3Nduf74aEN2fkclFuR/PBOl4py0imubs
9ZVXpSSB4VSpXrtujAnlhO4nEEiFR0rXSTcJbUz3hqjVgatRm9pAGZmU0u5x/K0M
idM46H+dDInWb53n/eJaj+GHoAJ18+yH62ck1OJqGSitaAfalGMFKRFHIqu8K95q
ifadcrbFJo0711KKPRwgQPVgB1j7zFOjkaHDR7CjrsToRSVWbFwCgC6+nVg5X74h
/wjvKq61pNvK7HavYIXWeUCzDqGbH404OjaksIYSw2Te2mJTOA0qOqh0edi6w6Y2
kVUcnqM5zt/TYaXsZdlxX1lTItAOQiV0yEuq/zPYBJ0ecgvhKOR0GHUseVsfVPrz
NxEZGEAgkSrHbSITd1arPgOuvL9FwlqsmWi6ZV6n+o/hiYlz9G2YoHK2tcaKd8wX
FqmgtKOPnoYg3h+7PoSahNLWEbEZEt8v6w6ezERm9U+ntl/sYISk1OCwwHCyqpfP
hA7J9GlK3f2aYmE0eT828bov1PIFudpdgL0HFadEAKdpfn3G0kYf0wQ2UZ6J+XrW
ZbcWhPzSTjKIDLWyrbRYu5Zo7I8uBVAA/eFopMRGbbn27ZgjrsM=
=gToI
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.17-rc1
This set of changes contains some preparatory work that is shared by
several branches and trees to support DVFS via power domains.
There's also a bit of cleanup and improvements to reboot on chips that
use PSCI.
* tag 'tegra-for-5.17-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Rename core power domain
soc/tegra: pmc: Rename 3d power domains
soc/tegra: regulators: Prepare for suspend
soc/tegra: fuse: Use resource-managed helpers
soc/tegra: fuse: Reset hardware
soc/tegra: pmc: Add reboot notifier
soc/tegra: Don't print error message when OPPs not available
Link: https://lore.kernel.org/r/20211217162253.1801077-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is an assortment of driver patches that rely on some of the changes
in the for-5.17/soc branch. These have all been acked by the respective
maintainers and go through the Tegra tree to more easily handle the
build dependency.
-----BEGIN PGP SIGNATURE-----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=YfSG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lWBt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
drivers: Changes for v5.17-rc1
This is an assortment of driver patches that rely on some of the changes
in the for-5.17/soc branch. These have all been acked by the respective
maintainers and go through the Tegra tree to more easily handle the
build dependency.
* tag 'tegra-for-5.17-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
media: staging: tegra-vde: Support generic power domain
spi: tegra20-slink: Add OPP support
mtd: rawnand: tegra: Add runtime PM and OPP support
mmc: sdhci-tegra: Add runtime PM and OPP support
pwm: tegra: Add runtime PM and OPP support
bus: tegra-gmi: Add runtime PM and OPP support
usb: chipidea: tegra: Add runtime PM and OPP support
soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
soc/tegra: Enable runtime PM during OPP state-syncing
Link: https://lore.kernel.org/r/20211217162253.1801077-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USIv2 IP-core is found on modern ARM64 Exynos SoCs (like Exynos850) and
provides selectable serial protocol (one of: UART, SPI, I2C). USIv2
registers usually reside in the same register map as a particular
underlying protocol it implements, but have some particular offset. E.g.
on Exynos850 the USI_UART has 0x13820000 base address, where UART
registers have 0x00..0x40 offsets, and USI registers have 0xc0..0xdc
offsets. Desired protocol can be chosen via SW_CONF register from System
Register block of the same domain as USI.
Before starting to use a particular protocol, USIv2 must be configured
properly:
1. Select protocol to be used via System Register
2. Clear "reset" flag in USI_CON
3. Configure HWACG behavior (e.g. for UART Rx the HWACG must be
disabled, so that the IP clock is not gated automatically); this is
done using USI_OPTION register
4. Keep both USI clocks (PCLK and IPCLK) running during USI registers
modification
This driver implements the above behavior. Of course, USIv2 driver
should be probed before UART/I2C/SPI drivers. It can be achieved by
embedding UART/I2C/SPI nodes inside of the USI node (in Device Tree);
driver then walks underlying nodes and instantiates those. Driver also
handles USI configuration on PM resume, as register contents can be lost
during CPU suspend.
This driver is designed with different USI versions in mind. So it
should be relatively easy to add new USI revisions to it later.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211204195757.8600-3-semen.protsenko@linaro.org
Tested-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This adds the description for the i.MX8MN disp blk-ctrl.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dispmix will be needed for the blkctl driver, so add it
to the gpcv2.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Like the i.MX8MM, keep the gpumix clocks running when the
domain is active.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The function has no users and is pointless now that the core frees the MSI
descriptors, which means potential users can just use msi_domain_free_irqs().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210748.793119155@linutronix.de
Protect the allocation properly and use the core allocation and free
mechanism.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211206210748.737904583@linutronix.de
Storing a pointer to the MSI descriptor just to track the Linux interrupt
number is daft. Just store the interrupt number and be done with it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de
Use the common msi_index member and get rid of the pointless wrapper struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211210221814.540704224@linutronix.de
Allocate the MSI device data on first invocation of the allocation function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211210221813.928842960@linutronix.de
The only unconditional part of MSI data in struct device is the irqdomain
pointer. Everything else can be allocated on demand. Create a data
structure and move the irqdomain pointer into it. The other MSI specific
parts are going to be removed from struct device in later steps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211210221813.617178827@linutronix.de
This contains a single build fix without which ARM allmodconfig builds
are broken if -Werror is enabled.
-----BEGIN PGP SIGNATURE-----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=bWVy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2ABQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
soc/tegra: Fixes for v5.16-rc6
This contains a single build fix without which ARM allmodconfig builds
are broken if -Werror is enabled.
* tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix bitwise vs. logical OR warning
Link: https://lore.kernel.org/r/20211215162618.3568474-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CORE power domain uses name of device-tree node, which is inconsistent with
the names of PMC domains. Set the name to "core" to make it consistent.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Device-tree schema doesn't allow domain name to start with a number.
We don't use 3d domain yet in device-trees, so rename it to the name
used by Tegra TRMs: TD, TD2.
Reported-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GENPD core now can set up domain's performance state properly while device
is RPM-suspended. Runtime PM of a device must be enabled during setup
because GENPD checks whether device is suspended and check doesn't work
while RPM is disabled. Instead of replicating the boilerplate RPM-enable
code around OPP helper for each driver, let's make OPP helper to take care
of enabling it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Depending on hardware version, Tegra SoC may require a higher voltages
during resume from system suspend, otherwise hardware will crash. Set
SoC voltages to a nominal levels during suspend.
Link: https://lore.kernel.org/all/a8280b5b-7347-8995-c97b-10b798cdf057@gmail.com/
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use resource-managed helpers to make code cleaner and more correct,
properly releasing all resources in case of driver probe error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The FUSE controller is enabled at a boot time. Reset it in order to put
hardware and clock into clean and disabled state.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC driver implements a restart handler that supports Tegra
specific reboot commands such as placing the device into 'recovery' mode
in order to reprogram the platform. This is accomplished by setting the
appropriate bit in the PMC scratch0 register prior to rebooting the
platform.
For Tegra platforms that support PSCI or EFI, the default Tegra restart
handler is not called and the PSCI or EFI restart handler is called
instead. Hence, for Tegra platforms that support PSCI or EFI, the Tegra
specific reboot commands do not currently work. Fix this by moving the
code that programs the PMC scratch0 register into a separate reboot
notifier that will always be called on reboot.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously we assumed that devm_tegra_core_dev_init_opp_table() will
be used only by drivers that will always have device with OPP table,
but this is not true anymore. For example now Tegra30 will have OPP table
for PWM, but Tegra20 not and both use the same driver. Hence let's not
print the error message about missing OPP table in the common helper,
we can print it elsewhere.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since devm_ioremap_resource() function return error pointers.
The pktdma_get_regs() function does not return NULL, It return error
pointers too. Using IS_ERR() to check the return value to fix this.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211214015544.7270-1-linmq006@gmail.com
A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not.
In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.
Fixes: 25cd5a3914 ("ARM: tegra: Add speedo-based process identification")
Link: https://github.com/ClangBuiltLinux/linux/issues/1488
Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
* Adds an auto-PM feature that is necessary for a single device
* Disables module builds, which were broken anyway
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYbnTUgAKCRClhN6SrnTN
2B28AP9KqcASRLcJ8dHSv+ILmHQimW6/AeUuhuwkGjk9tRRFgQEAqDsHYL/hFlUe
ayxR7RTLhlZUowdRHqzsAtI6mYyzEwE=
=wksk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WaN0
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-pmgr-5.17-v2' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC PMGR driver updates for 5.17
* Adds an auto-PM feature that is necessary for a single device
* Disables module builds, which were broken anyway
* tag 'asahi-soc-pmgr-5.17-v2' of https://github.com/AsahiLinux/linux:
soc: apple: apple-pmgr-pwrstate: Do not build as a module
soc: apple: apple-pmgr-pwrstate: Add auto-PM min level support
Link: https://lore.kernel.org/r/660f6f7f-0857-b54c-c415-79bcb93f0e02@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This doesn't make any sense as a module since it is a critical device,
and it turns out of_phandle_iterator_args was not exported so the module
version doesn't build anyway.
Fixes: 6df9d38f91 ("soc: apple: Add driver for Apple PMGR power state controls")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7f+wAKCRClhN6SrnTN
2Bk7AP42vfTQXHQVxtCnvivhc6m+P4z6sULPTqOWN4oPPcudSQEAkAjUeC2IFdQ3
4XovFzUZb7R8E7in7OpYxXyVAK5/eQY=
=xoPm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lrwu
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC PMGR driver for 5.17
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
* tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux:
soc: apple: Add driver for Apple PMGR power state controls
Link: https://lore.kernel.org/r/049f4de9-51be-7be4-1f9a-a59756af88d7@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is seemingly required for DCP/DCPEXT, without which they refuse to
boot properly. They need to be set to minimum state 4 (clock gated).
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
At the moment, using the ARM32 multi_v7_defconfig always results in two
SoCs being exposed in sysfs. This is wrong, as far as I'm aware the
Qualcomm DragonBoard 410c does not actually make use of a i.MX SoC. :)
qcom-db410c:/sys/devices/soc0$ grep . *
family:Freescale i.MX
machine:Qualcomm Technologies, Inc. APQ 8016 SBC
revision:0.0
serial_number:0000000000000000
soc_id:Unknown
qcom-db410c:/sys/devices/soc1$ grep . *
family:Snapdragon
machine:APQ8016
...
This happens because imx_soc_device_init() registers the soc device
unconditionally, even when running on devices that do not make use of i.MX.
Arnd already reported this more than a year ago and even suggested a fix
similar to this commit, but for some reason it was never submitted.
Fix it by checking if the "__mxc_cpu_type" variable was actually
initialized by earlier platform code. On devices without i.MX it will
simply stay 0.
Cc: Peng Fan <peng.fan@nxp.com>
Fixes: d2199b3487 ("ARM: imx: use device_initcall for imx_soc_device_init")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/CAK8P3a0hxO1TmK6oOMQ70AHSWJnP_CAq57YMOutrxkSYNjFeuw@mail.gmail.com/
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace container_of for converting a generic_pm_domain to a
zynqmp_pm_domain with a macro definition to simplify the code.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-5-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Instead of defining a flags field and a single bit in this field to
signal that a PM node has been requested, use a boolean field with a
descriptive name.
No functional change, but using a proper name instead of flags makes the
code easier to read.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-4-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use dev_err/dev_dbg instead of pr_err/pr_debug.
Add the PM node ids to supplement the (arbitrary) power domain names to
include information which PM nodes are requested by the driver.
Drop function names from the messages, because they can easily be added
with dynamic debug.
Remove comments explaining that error messages are printed on errors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-3-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
PM_INIT_FINALIZE tells the PMU FW that Linux is able to handle the power
management nodes that are provided by the PMU FW. Nodes that are not
requested are shut down after this call.
Calling PM_INIT_FINALIZE from the zynqmp_power driver is wrong. The PM
node request mechanism is implemented in the zynqmp_pm_domains driver,
which must also call PM_INIT_FINALIZE.
Due to the behavior of the PMU FW, all devices must be powered up before
PM_INIT_FINALIZE is called, because otherwise the devices might
misbehave. Calling PM_INIT_FINALIZE from the sync_state device callback
ensures that all users probed successfully before the PMU FW is allowed
to power off unused domains.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210825150313.4033156-2-m.tretter@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Add support for R-Car S4-8 (R8A779F0) to the R-Car RST driver.
The register map of R-Car S4-8 is the same as R-Car V3U so that
renames "V3U" and "r8a779a0" to "Gen4".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20211201073308.1003945-11-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Implements genpd and reset providers for downstream devices. Each
instance of the driver binds to a single register and represents a
single SoC power domain.
The driver does not currently implement all features (clockgate-only
state, misc flags), but we declare the respective registers for
documentation purposes. These features will be added as they become
useful for downstream devices.
This also creates the apple/soc tree and Kconfig submenu.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>