The sq thread actively releases CPU resources by calling the
cond_resched() and schedule() interfaces when it is idle. Therefore,
more resources are available for other threads to run.
There exists a problem in sq thread: it does not unlock sqd->lock before
releasing CPU resources every time. This makes other threads pending on
sqd->lock for a long time. For example, the following interfaces all
require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers()
and io_ring_exit_work().
Before the sq thread releases CPU resources, unlocking sqd->lock will
provide the user a better experience because it can respond quickly to
user requests.
Signed-off-by: Kanchan Joshi<joshi.k@samsung.com>
Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com>
Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=l7Mo
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
In the io_uring_cmd_prep_async() there is an unnecessary compilation time
check to check if cmd is correctly placed at field 48 of the SQE.
This is unnecessary, since this check is already in place at
io_uring_init():
BUILD_BUG_SQE_ELEM(48, __u64, addr3);
Remove it and the uring_cmd_pdu_size() function, which is not used
anymore.
Keith started a discussion about this topic in the following thread:
Link: https://lore.kernel.org/lkml/ZDBmQOhbyU0iLhMw@kbusch-mbp.dhcp.thefacebook.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-4-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.
The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block. So,
saves the whole SQE other than just the pdu.
This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.
The main advantage is that we don't need to create custom structures for
simple commands.
Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a simple helper that returns the size of the SQE. The SQE could
have two size, depending of the flags.
If IO_URING_SETUP_SQE128 flag is set, then return a double SQE,
otherwise returns the sizeof of io_uring_sqe (64 bytes).
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pages that are from the same folio do not necessarily need to be
consecutive. In that case, we cannot consolidate them into a single bvec
entry. Before applying the huge page optimization from commit 57bebf807e
("io_uring/rsrc: optimise registered huge pages"), check that the memory
is actually consecutive.
Cc: stable@vger.kernel.org
Fixes: 57bebf807e ("io_uring/rsrc: optimise registered huge pages")
Signed-off-by: Tobias Holl <tobias@tholl.xyz>
[axboe: formatting]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
vP7ugFnttneg
=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmRCvawQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpiKTEACvp0jm3Lyhxb8RMsx5T6Ko0pFH3DIymiL4
xpoZmAUflOjD0c+99FwHRQqKKXuo3OelhW+YOm0N6OOAt6JMSGmKpZh0UNJx+Fgj
wMwiQ0X3Y5SaAsr5ZpXM+G1BV7ajihsMpu8/a718ERB3U3cLDz2qJfnzJh+E5Ip5
pYB4vS3+/FAER2MYQ7IPeovch2wWYtxDPztOxNX6SORu3OvpWiz1GR/+8u0tqj50
ROq97Jwjh5Tl4zP356EUSj/Vkfdr2yb+NlLbun8My5x8tYftZjnrNQ/+qeJNLwB8
tWTrg166ox/VX3aYZruAgUPv0IyGPZg7qZV5R72ChBK3VhIbOOLOCm/V6dhvl/XH
vu2FG7J8WylWHmc+OU8u7TeSJdrwxTLs4e2IFUBK9ymAYFp0Q9S924fgvSYsFvVB
iNn58SPRIbuA4SPtRfCd7pENtZW/QKfBC5CYK+pjsZVX40c9dbe40foVu4t2/EAo
gi9+gSWEUVRRW2osxjaHXh78cW63g0j9bNfS6n1Vy32Oo5Mwm7n+bVWqCU5bCBXI
MpPOk6AgME3UPwFzGzSmx+PVw8VacPxYP1NF8RFTCwj7OowFnrolJtruDmKJgXWY
BN41EDo41k/C5mEu16Jr9rAkHeVhHaNZ+JhyDrzv8llJ/rv+4zEJw9SrhnpufmOX
+YERd/ndAw==
=Erfk
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Cleanup of the io-wq per-node mapping, notably getting rid of it so
we just have a single io_wq entry per ring (Breno)
- Followup to the above, move accounting to io_wq as well and
completely drop struct io_wqe (Gabriel)
- Enable KASAN for the internal io_uring caches (Breno)
- Add support for multishot timeouts. Some applications use timeouts to
wake someone waiting on completion entries, and this makes it a bit
easier to just have a recurring timer rather than needing to rearm it
every time (David)
- Support archs that have shared cache coloring between userspace and
the kernel, and hence have strict address requirements for mmap'ing
the ring into userspace. This should only be parisc/hppa. (Helge, me)
- XFS has supported O_DIRECT writes without needing to lock the inode
exclusively for a long time, and ext4 now supports it as well. This
is true for the common cases of not extending the file size. Flag the
fs as having that feature, and utilize that to avoid serializing
those writes in io_uring (me)
- Enable completion batching for uring commands (me)
- Revert patch adding io_uring restriction to what can be GUP mapped or
not. This does not belong in io_uring, as io_uring isn't really
special in this regard. Since this is also getting in the way of
cleanups and improvements to the GUP code, get rid of if (me)
- A few series greatly reducing the complexity of registered resources,
like buffers or files. Not only does this clean up the code a lot,
the simplified code is also a LOT more efficient (Pavel)
- Series optimizing how we wait for events and run task_work related to
it (Pavel)
- Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)
- Misc cleanups and improvements (Pavel, me)
* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
Revert "io_uring/rsrc: disallow multi-source reg buffers"
io_uring: add support for multishot timeouts
io_uring/rsrc: disassociate nodes and rsrc_data
io_uring/rsrc: devirtualise rsrc put callbacks
io_uring/rsrc: pass node to io_rsrc_put_work()
io_uring/rsrc: inline io_rsrc_put_work()
io_uring/rsrc: add empty flag in rsrc_node
io_uring/rsrc: merge nodes and io_rsrc_put
io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
io_uring/rsrc: remove unused io_rsrc_node::llist
io_uring/rsrc: refactor io_queue_rsrc_removal
io_uring/rsrc: simplify single file node switching
io_uring/rsrc: clean up __io_sqe_buffers_update()
io_uring/rsrc: inline switch_start fast path
io_uring/rsrc: remove rsrc_data refs
io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
io_uring/rsrc: use wq for quiescing
io_uring/rsrc: refactor io_rsrc_ref_quiesce
io_uring/rsrc: remove io_rsrc_node::done
io_uring/rsrc: use nospec'ed indexes
...
-----BEGIN PGP SIGNATURE-----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=EaE9
-----END PGP SIGNATURE-----
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
This reverts commit edd4782696.
There's really no specific need to disallow multiple sources of buffers,
and io_uring really should not be mandating this by itself. We should
be able to solely rely on GUP making these decisions.
As this also stands in the way of a cleanup where io_uring is the odd
one out, kill it.
Link: https://lore.kernel.org/all/61ded378-51a8-1dcb-b631-fda1903248a9@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A multishot timeout submission will repeatedly generate completions with
the IORING_CQE_F_MORE cflag set. Depending on the value of the `off'
field in the submission, these timeouts can either repeat indefinitely
until cancelled (`off' = 0) or for a fixed number of times (`off' > 0).
Only noseq timeouts (i.e. not dependent on the number of I/O
completions) are supported.
An indefinite timer will be cancelled if the CQ ever overflows.
Signed-off-by: David Wei <davidhwei@meta.com>
Link: https://lore.kernel.org/r/20230418225817.1905027-1-davidhwei@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct io_rsrc_node carries a number of resources represented by struct
io_rsrc_put. That was handy before for sync overhead ammortisation, but
all complexity is gone and nodes are simple and lightweight. Let's
allocate a separate node for each resource.
Nodes and io_rsrc_put and not much different in size, and former are
cached, so node allocation should work better. That also removes some
overhead for nested iteration in io_rsrc_node_ref_zero() /
__io_rsrc_put_work().
Another reason for the patch is that it greatly reduces complexity
by moving io_rsrc_node_switch[_start]() inside io_queue_rsrc_removal(),
so users don't have to care about it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c7d3a45b30cc14cd93700a710dd112edc703db98.1681822823.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For io_rsrc_ref_quiesce() to progress it should execute all task_work
items, including deferred ones. However, currently nobody would wake us,
and so let's set ctx->cq_wait_nr, so io_req_local_work_add() would wake
us up.
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f1a90d1bc5ebf096475b018fed52e54f3b89d4af.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace completions with waitqueues for rsrc data quiesce, the main
wakeup condition is when data refs hit zero. Note that data refs are
only changes under ->uring_lock, so we prepare before mutex_unlock()
reacquire it after taking the lock back. This change will be needed
in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1d0dbc74b3b4fd67c8f01819e680c5e0da252956.1681395792.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a constant IO_NOTIF_UBUF_FLAGS for struct ubuf_info flags that
notifications use. That should minimise merge conflicts for planned
changes touching both io_uring and net at the same time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=pzRD
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a small tweak to when task_work needs redirection, marked for
stable as well"
* tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux:
io_uring: complete request via task work in case of DEFER_TASKRUN
So far io_req_complete_post() only covers DEFER_TASKRUN by completing
request via task work when the request is completed from IOWQ.
However, uring command could be completed from any context, and if io
uring is setup with DEFER_TASKRUN, the command is required to be
completed from current context, otherwise wait on IORING_ENTER_GETEVENTS
can't be wakeup, and may hang forever.
The issue can be observed on removing ublk device, but turns out it is
one generic issue for uring command & DEFER_TASKRUN, so solve it in
io_uring core code.
Fixes: e6aeb2721d ("io_uring: complete all requests in task context")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/
Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use io_rsrc_node_switch() coupled with io_rsrc_node_switch_start()
for a bunch of cases including initialising ctx->rsrc_node, i.e. by
passing NULL instead of rsrc_data. Leave it to only deal with actual
node changing.
For that, first remove it from io_uring_create() and add a function
allocating the first node. Then also remove all calls to
io_rsrc_node_switch() from files/buffers register as we already have a
node installed and it does essentially nothing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d146fe306ff98b1a5a60c997c252534f03d423d7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernel test robot complains about __io_remove_buffers().
io_uring/kbuf.c:221 __io_remove_buffers() warn: variable dereferenced
before check 'bl->buf_ring' (see line 219)
That check is not needed as ->buf_ring will always be set, so we can
remove it and so silence the warning.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9a632bbf749d9d911e605255652ce08d18e7d2c6.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring/io_uring.c:432 io_prep_async_work() error: we previously
assumed 'req->file' could be null (see line 425).
Even though it's a false positive as there will not be REQ_F_ISREG set
without a file, let's add a simple check to make the kernel test robot
happy. We don't care about performance here, but assumingly it'll be
optimised out by the compiler.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6cfbe92c74b789c0b4f046f7f98d19b1ca2e5b7.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We know now what the completion context is for the uring_cmd completion
handling, so use that to have io_req_task_complete() decide what the
best way to complete the request is. This allows batching of the posted
completions if we have multiple pending, rather than always doing them
one-by-one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=32lQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Just two minor fixes for provided buffers - one where we could
potentially leak a buffer, and one where the returned values was
off-by-one in some cases"
* tag 'io_uring-6.3-2023-04-06' of git://git.kernel.dk/linux:
io_uring: fix memory leak when removing provided buffers
io_uring: fix return value when removing provided buffers
Chains of memory accesses are never good for performance.
The req->task->io_uring->in_cancel in io_req_local_work_add() is there
so that when a task is exiting via io_uring_try_cancel_requests() and
starts waiting for completions, it gets woken up by every new task_work
item queued.
Do a little trick by announcing waiting in io_uring_try_cancel_requests(),
making io_req_local_work_add() wake us up. We also need to check for
deferred tw items after prepare_to_wait(TASK_INTERRUPTIBLE);
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fb11597e9bbcb365901824f8c5c2cf0d6ee100d0.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every task_work will try to wake the task to be executed, which causes
excessive scheduling and additional overhead. For some tw it's
justified, but others won't do much but post a single CQE.
When a task waits for multiple cqes, every such task_work will wake it
up. Instead, the task may give a hint about how many cqes it waits for,
io_req_local_work_add() will compare against it and skip wake ups
if #cqes + #tw is not enough to satisfy the waiting condition. Task_work
that uses the optimisation should be simple enough and never post more
than one CQE. It's also ignored for non DEFER_TASKRUN rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d2b77e99d1e86624d8a69f7037d764b739dcd225.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wenwen Chen