Commit Graph

98 Commits

Author SHA1 Message Date
Matthew Wilcox (Oracle) fe5ddf6b21 ext4: Convert ext4 to read_folio
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-09 16:21:45 -04:00
Matthew Wilcox (Oracle) b7446e7cf1 fs: Remove aop flags parameter from grab_cache_page_write_begin()
There are no more aop flags left, so remove the parameter.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-05-08 14:28:19 -04:00
Matthew Wilcox (Oracle) 8f50c8b7ff ext4: Use scoped memory API in mext_page_double_lock()
Replace use of AOP_FLAG_NOFS with calls to memalloc_nofs_save()
and memalloc_nofs_restore().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
2022-05-08 14:28:19 -04:00
luo penghao a6dbc76c4d ext4: remove redundant o_start statement
The if will goto out of the loop, and until the end of the
function execution, o_start will not be used again.

The clang_analyzer complains as follows:

fs/ext4/move_extent.c:635:5 warning:

Value stored to 'o_start' is never read

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211208075157.404535-1-luo.penghao@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-01-10 13:25:56 -05:00
zhangyi (F) 2d069c0889 ext4: use common helpers in all places reading metadata buffers
Revome all open codes that read metadata buffers, switch to use
ext4_read_bh_*() common helpers.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200924073337.861472-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-18 10:37:14 -04:00
brookxu 27bc446e2d ext4: limit the length of per-inode prealloc list
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.

After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:

Running time on unfixed kernel:
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real    0m2.051s
user    0m0.008s
sys     0m2.026s

Running time on fixed kernel:
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real    0m0.471s
user    0m0.004s
sys     0m0.395s

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-19 12:04:36 -04:00
Theodore Ts'o 54d3adbc29 ext4: save all error info in save_error_info() and drop ext4_set_errno()
Using a separate function, ext4_set_errno() to set the errno is
problematic because it doesn't do the right thing once
s_last_error_errorcode is non-zero.  It's also less racy to set all of
the error information all at once.  (Also, as a bonus, it shrinks code
size slightly.)

Link: https://lore.kernel.org/r/20200329020404.686965-1-tytso@mit.edu
Fixes: 878520ac45 ("ext4: save the error code which triggered...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-04-01 17:29:06 -04:00
Ross Zwisler 73131fbb00 ext4: use jbd2_inode dirty range scoping
Use the newly introduced jbd2_inode dirty range scoping to prevent us
from waiting forever when trying to complete a journal transaction.

Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
2019-06-20 17:26:26 -04:00
Theodore Ts'o c60990b361 ext4: clean up kerneldoc warnigns when building with W=1
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-06-19 16:30:03 -04:00
Chandan Rajendra 592ddec757 ext4: use IS_ENCRYPTED() to check encryption status
This commit removes the ext4 specific ext4_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.

Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 23:56:43 -05:00
Theodore Ts'o f18b2b83a7 ext4: fix argument checking in EXT4_IOC_MOVE_EXT
If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.

Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around.  This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.

Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
2018-10-02 01:34:44 -04:00
Gustavo A. R. Silva 62bbdd9974 ext4: use swap macro in mext_page_double_lock
Make use of the swap macro and remove unnecessary variable *tmp*.
This makes the code easier to read and maintain.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-07-29 16:11:59 -04:00
Nikolay Borisov 1d39834fba ext4: remove EXT4_STATE_DIOREAD_LOCK flag
Commit 16c5468859 ("ext4: Allow parallel DIO reads") reworked the way
locking happens around parallel dio reads. This resulted in obviating
the need for EXT4_STATE_DIOREAD_LOCK flag and accompanying logic.
Currently this amounts to dead code so let's remove it. No functional
changes

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2018-03-22 11:52:10 -04:00
Theodore Ts'o f516676857 ext4: fix up remaining files with SPDX cleanups
A number of ext4 source files were skipped due because their copyright
permission statements didn't match the expected text used by the
automated conversion utilities.  I've added SPDX tags for the rest.

While looking at some of these files, I've noticed that we have quite
a bit of variation on the licenses that were used --- in particular
some of the Red Hat licenses on the jbd2 files use a GPL2+ license,
and we have some files that have a LGPL-2.1 license (which was quite
surprising).

I've not attempted to do any license changes.  Even if it is perfectly
legal to relicense to GPL 2.0-only for consistency's sake, that should
be done with ext4 developer community discussion.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-12-17 22:00:59 -05:00
Tahsin Erdogan 02749a4c20 ext4: add ext4_is_quota_file()
IS_NOQUOTA() indicates whether quota is disabled for an inode. Ext4
also uses it to check whether an inode is for a quota file. The
distinction currently doesn't matter because quota is disabled only
for the quota files. When we start disabling quota for other inodes
in the future, we will want to make the distinction clear.

Replace IS_NOQUOTA() call with ext4_is_quota_file() at places where
we are checking for quota files.

Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-22 11:31:25 -04:00
Linus Torvalds 1c23de6308 Fix a memory leak on an error path, and two races when modifying
inodes relating to the inline_data and metadata checksum features.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljXHNMACgkQ8vlZVpUN
 gaPwoggAiodb37DHZ/X6fnRr8314OJT8mRUbUK3aDagCRb0Kp9iFAwwpHIG8Gxw1
 akI7Jy8VWLC4EbHb9wzXFEO7wl/IBLq3t70Vid2cBR302gblhIIz6hkHrQ9RIlW3
 MH5sFhXiVq4WYPuxQFWS6ohg6/SYTwcgI9rXxEnkLVmOiG2Ov2/v4/wiflau8vgK
 fNYyncHSylwJ5QIaT8mUIawetlunEHO0Vz5AZNzkcMhkzUHxmRWvMtGWcvwukstb
 7vXZhN5HHB8RZ33qcdtuAaNBHwBmrU/acicIpsvL/jfkFWlJTS0PBRUvwxnPeebo
 G0xRDEIwpZoy5h8fxzIxqh+CQqg6QA==
 =/ycw
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a memory leak on an error path, and two races when modifying
  inodes relating to the inline_data and metadata checksum features"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix two spelling nits
  ext4: lock the xattr block before checksuming it
  jbd2: don't leak memory if setting up journal fails
  ext4: mark inode dirty after converting inline directory
2017-03-26 10:29:21 -07:00
Theodore Ts'o d67d64f423 ext4: fix two spelling nits
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-03-25 17:33:31 -04:00
Fabian Frederick 93407472a2 fs: add i_blocksize()
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
  Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Eric Whitney 14fbd4aa61 ext4: enforce online defrag restriction for encrypted files
Online defragging of encrypted files is not currently implemented.
However, the move extent ioctl can still return successfully when
called.  For example, this occurs when xfstest ext4/020 is run on an
encrypted file system, resulting in a corrupted test file and a
corresponding test failure.

Until the proper functionality is implemented, fail the move extent
ioctl if either the original or donor file is encrypted.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-08-29 15:45:11 -04:00
Jan Kara ee0876bc69 ext4: do not ask jbd2 to write data for delalloc buffers
Currently we ask jbd2 to write all dirty allocated buffers before
committing a transaction when doing writeback of delay allocated blocks.
However this is unnecessary since we move all pages to writeback state
before dropping a transaction handle and then submit all the necessary
IO. We still need the transaction commit to wait for all the outstanding
writeback before flushing disk caches during transaction commit to avoid
data exposure issues though. Use the new jbd2 capability and ask it to
only wait for outstanding writeback during transaction commit when
writing back data in ext4_writepages().

Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24 00:56:08 -04:00
Linus Torvalds 93061f390f These changes contains a fix for overlayfs interacting with some
(badly behaved) dentry code in various file systems.  These have been
 reviewed by Al and the respective file system mtinainers and are going
 through the ext4 tree for convenience.
 
 This also has a few ext4 encryption bug fixes that were discovered in
 Android testing (yes, we will need to get these sync'ed up with the
 fs/crypto code; I'll take care of that).  It also has some bug fixes
 and a change to ignore the legacy quota options to allow for xfstests
 regression testing of ext4's internal quota feature and to be more
 consistent with how xfs handles this case.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJXBn4aAAoJEPL5WVaVDYGjHWgH/2wXnlQnC2ndJhblBWtPzprz
 OQW4dawdnhxqbTEGUqWe942tZivSb/liu/lF+urCGbWsbgz9jNOCmEAg7JPwlccY
 mjzwDvtVq5U4d2rP+JDWXLy/Gi8XgUclhbQDWFVIIIea6fS7IuFWqoVBR+HPMhra
 9tEygpiy5lNtJA/hqq3/z9x0AywAjwrYR491CuWreo2Uu1aeKg0YZsiDsuAcGioN
 Waa2TgbC/ZZyJuJcPBP8If+VOFAa0ea3F+C/o7Tb9bOqwuz0qSTcaMRgt6eQ2KUt
 P4b9Ecp1XLjJTC7IYOknUOScY3lCyREx/Xya9oGZfFNTSHzbOlLBoplCr3aUpYQ=
 =/HHR
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
 "These changes contains a fix for overlayfs interacting with some
  (badly behaved) dentry code in various file systems.  These have been
  reviewed by Al and the respective file system mtinainers and are going
  through the ext4 tree for convenience.

  This also has a few ext4 encryption bug fixes that were discovered in
  Android testing (yes, we will need to get these sync'ed up with the
  fs/crypto code; I'll take care of that).  It also has some bug fixes
  and a change to ignore the legacy quota options to allow for xfstests
  regression testing of ext4's internal quota feature and to be more
  consistent with how xfs handles this case"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: ignore quota mount options if the quota feature is enabled
  ext4 crypto: fix some error handling
  ext4: avoid calling dquot_get_next_id() if quota is not enabled
  ext4: retry block allocation for failed DIO and DAX writes
  ext4: add lockdep annotations for i_data_sem
  ext4: allow readdir()'s of large empty directories to be interrupted
  btrfs: fix crash/invalid memory access on fsync when using overlayfs
  ext4 crypto: use dget_parent() in ext4_d_revalidate()
  ext4: use file_dentry()
  ext4: use dget_parent() in ext4_file_open()
  nfs: use file_dentry()
  fs: add file_dentry()
  ext4 crypto: don't let data integrity writebacks fail with ENOMEM
  ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
2016-04-07 17:22:20 -07:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Theodore Ts'o daf647d2dd ext4: add lockdep annotations for i_data_sem
With the internal Quota feature, mke2fs creates empty quota inodes and
quota usage tracking is enabled as soon as the file system is mounted.
Since quotacheck is no longer preallocating all of the blocks in the
quota inode that are likely needed to be written to, we are now seeing
a lockdep false positive caused by needing to allocate a quota block
from inside ext4_map_blocks(), while holding i_data_sem for a data
inode.  This results in this complaint:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&ei->i_data_sem);
                                lock(&s->s_dquot.dqio_mutex);
                                lock(&ei->i_data_sem);
   lock(&s->s_dquot.dqio_mutex);

Google-Bug-Id: 27907753

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2016-04-01 01:31:28 -04:00
Eryu Guan 6ffe77bad5 ext4: iterate over buffer heads correctly in move_extent_per_page()
In commit bcff24887d ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.

Fixes: bcff24887d ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-03-09 21:37:53 -05:00
Eryu Guan bcff24887d ext4: don't read blocks from disk after extents being swapped
I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.

The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned.  At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.

This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:

    mnt=/mnt/ext4
    donorfile=$mnt/donor
    testfile=$mnt/testfile
    e4compact=~/xfstests/src/e4compact

    rm -f $donorfile $testfile

    # reserve space for donor file, written by 0xaa and sync to disk to
    # avoid EBUSY on EXT4_IOC_MOVE_EXT
    xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile

    # create test file written by 0xbb
    xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile

    # compute initial md5sum
    md5sum $testfile | tee md5sum.txt
    # drop cache, force e4compact to read data from disk
    echo 3 > /proc/sys/vm/drop_caches

    # test defrag
    echo "$testfile" | $e4compact -i -v -f $donorfile
    # check md5sum
    md5sum -c md5sum.txt

Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().

Cc: stable@vger.kernel.org
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-02-12 01:20:43 -05:00
Eric Whitney 04e22412f4 ext4: make online defrag error reporting consistent
Make the error reporting behavior resulting from the unsupported use
of online defrag on files with data journaling enabled consistent with
that implemented for bigalloc file systems. Difference found with
ext4/308.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2015-06-21 21:38:03 -04:00
Fabian Frederick bf86546760 ext4: use swap() in mext_page_double_lock()
Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-12 23:47:33 -04:00
Al Viro b1bc6d7f16 move_extent_per_page(): get rid of unused w_flags
... and comparing get_fs() with KERNEL_DS used only to initialize that

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-17 06:43:56 -05:00
Dmitry Monakhov 88c6b61ff1 ext4: move_extent improve bh vanishing success factor
Xiaoguang Wang has reported sporadic EBUSY failures of ext4/302
Unfortunetly there is nothing we can do if some other task holds BH's
refenrence.  So we must return EBUSY in this case.  But we can try
kicking the journal to see if the other task releases the bh reference
after the commit is complete.  Also decrease false positives by
properly checking for ENOSPC and retrying the allocation after kicking
the journal --- which is done by ext4_should_retry_alloc().

[ Modified by tytso to properly check for ENOSPC. ]

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-05 11:52:38 -05:00
Xiaoguang Wang 65dd8327eb ext4: delete useless comments about ext4_move_extents
In patch 'ext4: refactor ext4_move_extents code base',  Dmitry Monakhov has
refactored ext4_move_extents' implementation, but forgot to update the
corresponding comments, this patch will try to delete some useless comments.

Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-11 19:56:34 -04:00
Theodore Ts'o ed8a1a766a ext4: rename ext4_ext_find_extent() to ext4_find_extent()
Make the function name less redundant.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 14:43:09 -04:00
Theodore Ts'o 3bdf14b4d7 ext4: reuse path object in ext4_move_extents()
Reuse the path object in ext4_move_extents() so we don't unnecessarily
free and reallocate it.

Also clean up the get_ext_path() wrapper so that it has the same
semantics of freeing the path object on error as ext4_ext_find_extent().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 14:42:09 -04:00
Theodore Ts'o b7ea89ad0a ext4: allow a NULL argument to ext4_ext_drop_refs()
Teach ext4_ext_drop_refs() to accept a NULL argument, much like
kfree().  This allows us to drop a lot of checks to make sure path is
non-NULL before calling ext4_ext_drop_refs().

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 14:39:09 -04:00
Theodore Ts'o 705912ca95 ext4: teach ext4_ext_find_extent() to free path on error
Right now, there are a places where it is all to easy to leak memory
on an error path, via a usage like this:

	struct ext4_ext_path *path = NULL

	while (...) {
		...
		path = ext4_ext_find_extent(inode, block, path, 0);
		if (IS_ERR(path)) {
			/* oops, if path was non-NULL before the call to
			   ext4_ext_find_extent, we've leaked it!  :-(  */
			...
			return PTR_ERR(path);
		}
		...
	}

Unfortunately, there some code paths where we are doing the following
instead:

	path = ext4_ext_find_extent(inode, block, orig_path, 0);

and where it's important that we _not_ free orig_path in the case
where ext4_ext_find_extent() returns an error.

So change the function signature of ext4_ext_find_extent() so that it
takes a struct ext4_ext_path ** for its third argument, and by
default, on an error, it will free the struct ext4_ext_path, and then
zero out the struct ext4_ext_path * pointer.  In order to avoid
causing problems, we add a flag EXT4_EX_NOFREE_ON_ERR which causes
ext4_ext_find_extent() to use the original behavior of forcing the
caller to deal with freeing the original path pointer on the error
case.

The goal is to get rid of EXT4_EX_NOFREE_ON_ERR entirely, but this
allows for a gentle transition and makes the patches easier to verify.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 14:34:09 -04:00
Dmitry Monakhov fcf6b1b729 ext4: refactor ext4_move_extents code base
ext4_move_extents is too complex for review. It has duplicate almost
each function available in the rest of other codebase. It has useless
artificial restriction orig_offset == donor_offset. But in fact logic
of ext4_move_extents is very simple:

Iterate extents one by one (similar to ext4_fill_fiemap_extents)
   ->Iterate each page covered extent (similar to generic_perform_write)
     ->swap extents for covered by page (can be shared with IOC_MOVE_DATA)

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-30 23:52:19 -04:00
Dmitry Monakhov f8fb4f4150 ext4: use ext4_ext_next_allocated_block instead of mext_next_extent
This allows us to make mext_next_extent static and potentially get rid
of it.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-08-30 23:50:56 -04:00
Dmitry Monakhov 6e2631463f ext4: fix incorrect locking in move_extent_per_page
If we have to copy data we must drop i_data_sem because of
get_blocks() will be called inside mext_page_mkuptodate(), but later we must
reacquire it again because we are about to change extent's tree

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-07-27 22:32:27 -04:00
liang xie 5d60125530 ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
Make them more consistently

Signed-off-by: xieliang <xieliang@xiaomi.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-05-12 22:06:43 -04:00
Lukas Czerner 556615dcbf ext4: rename uninitialized extents to unwritten
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.

The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.

This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.

This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-20 23:45:47 -04:00
Namjae Jeon 9eb79482a9 ext4: Add support FALLOC_FL_COLLAPSE_RANGE for fallocate
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
 
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
   blocks which are present in this range and than updates all the logical
   offsets of extents beyond "offset + len" to nullify the hole created by
   removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
   in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-23 15:18:59 -05:00
Dan Carpenter df3a98b086 ext4: remove an unneeded check in mext_page_mkuptodate()
"err" is zero here, there is no need to check again.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-17 20:46:40 -05:00
J. Bruce Fields 375e289ea8 vfs: pull ext4's double-i_mutex-locking into common code
We want to do this elsewhere as well.

Also catch any attempts to use it for directories (where this ordering
would conflict with ancestor-first directory ordering in lock_rename).

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09 00:16:39 -05:00
Theodore Ts'o 107a7bd31a ext4: cache all of an extent tree's leaf block upon reading
When we read in an extent tree leaf block from disk, arrange to have
all of its entries cached.  In nearly all cases the in-memory
representation will be more compact than the on-disk representation in
the buffer cache, and it allows us to get the information without
having to traverse the extent tree for successive extents.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
2013-08-16 21:23:41 -04:00
Jon Ernst 03b40e3496 ext4: delete unused variables
This patch removed several unused variables.

Signed-off-by: Jon Ernst <jonernst07@gmx.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-17 08:56:26 -04:00
Darrick J. Wong 2656497b26 ext4: mext_insert_extents should update extent block checksum
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-19 14:04:12 -04:00
Dmitry Monakhov 7e8b12c60a ext4: defragmentation code cleanup
- grab_cache_page_write_begin() may not wait on page's writeback since
  (1d1d1a7672). But it is still reasonable to wait on page's writeback
  here in order to be on the safe side.

- Fix miss typo: pass 'length' instead of 'end' to __block_write_begin()
  https://bugzilla.kernel.org/show_bug.cgi?id=56241

TESTCASE: git://oss.sgi.com/xfs/cmds/xfstests.git
MKFS_OPTIONS="-b1024" ; ./check ext4/304

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Akira Fujita <a-fujita.rs.jp.nec.com>
2013-04-11 23:24:58 -04:00
Dmitri Monakho 8c8e0ca622 ext4: fix usless declarations
This patch should fix sparse complains about shadow declatations.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-09 22:48:36 -04:00
Dr. Tilmann Bubeck 393d1d1d76 ext4: implementation of a new ioctl called EXT4_IOC_SWAP_BOOT
Add a new ioctl, EXT4_IOC_SWAP_BOOT which swaps i_blocks and
associated attributes (like i_blocks, i_size, i_flags, ...) from the
specified inode with inode EXT4_BOOT_LOADER_INO (#5). This is
typically used to store a boot loader in a secure part of the
filesystem, where it can't be changed by a normal user by accident.
The data blocks of the previous boot loader will be associated with
the given inode.

This usercode program is a simple example of the usage:

int main(int argc, char *argv[])
{
  int fd;
  int err;

  if ( argc != 2 ) {
    printf("usage: ext4-swap-boot-inode FILE-TO-SWAP\n");
    exit(1);
  }

  fd = open(argv[1], O_WRONLY);
  if ( fd < 0 ) {
    perror("open");
    exit(1);
  }

  err = ioctl(fd, EXT4_IOC_SWAP_BOOT);
  if ( err < 0 ) {
    perror("ioctl");
    exit(1);
  }

  close(fd);
  exit(0);
}

[ Modified by Theodore Ts'o to fix a number of bugs in the original code.]

Signed-off-by: Dr. Tilmann Bubeck <t.bubeck@reinform.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-08 12:54:05 -04:00
Linus Torvalds d3c926264a Fix a number of regression and other bugs in ext4, most of which were
relatively obscure cornercases or races that were found using
 regression tests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRSm5lAAoJENNvdpvBGATwZW8QAN7jMn7IaVCTXXblqgqba4uN
 KvLGRgK7R/n1rIhdHoxJHumwRQLTppVzjDCc8ePnWhdypzMZNuzUvs+OoCFdkDsW
 qf3CmL/p/R1oSiSzzFIs/7wGp7xBZ0l0BWZMFWd9EUg9cqoMBDA6KzcMF95fOtas
 KsjRL+BThacVldS7jyKFwE4BrpXd0Z5V9qZ6wjQPPoBx8sXF4iYA+CZVo5FUKBs8
 6I82LS1/PIYCe3IOSpCgyKXQqRzAYJANv1ndken5wW8jWT2R58e360OwZEVcpIN9
 /caov+F5OKfk4iOGq3b+vwRplNhAI2S6C4vhMbmS2GPWE8Fnr8gubyqNAIIs5R/y
 3zYHdqZESfuEF7K3QoAepiJhi3YIoRxXC1FxD7uxx7VBRhW2w8Ij5hlXhuSoh24M
 MUiXgCeIxQb+ZfUx0OHV++LSOHVccU4y7Z0X+LpXQa6tEMBuSgK6yCKsGkyr8APN
 gPMupTptgyUE3tFaCjqc7QKtmoeRAMSvzfqEyV6DlblIOe+3f/RJzRO222Xc4kxq
 D9t2tOuPoXsR+ivtS5pEcrZkE4Y2hkJbJzb7XXvfoETixYsuX6VkiPK/D68S9eRe
 VelqTM2lHPJi/3Wkle0p4pzWpEq70D8qZVp4TKLHMJCTQKpwUfopm5lvln87lc7w
 4JDORIx/ed1u8MMTJlmG
 =X3vc
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of regression and other bugs in ext4, most of which were
  relatively obscure cornercases or races that were found using
  regression tests."

* tag 'ext4_for_linue' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
  ext4: fix data=journal fast mount/umount hang
  ext4: fix ext4_evict_inode() racing against workqueue processing code
  ext4: fix memory leakage in mext_check_coverage
  ext4: use s_extent_max_zeroout_kb value as number of kb
  ext4: use atomic64_t for the per-flexbg free_clusters count
  jbd2: fix use after free in jbd2_journal_dirty_metadata()
  ext4: reserve metadata block for every delayed write
  ext4: update reserved space after the 'correction'
  ext4: do not use yield()
  ext4: remove unused variable in ext4_free_blocks()
  ext4: fix WARN_ON from ext4_releasepage()
  ext4: fix the wrong number of the allocated blocks in ext4_split_extent()
  ext4: update extent status tree after an extent is zeroed out
  ext4: fix wrong m_len value after unwritten extent conversion
  ext4: add self-testing infrastructure to do a sanity check
  ext4: avoid a potential overflow in ext4_es_can_be_merged()
  ext4: invalidate extent status tree during extent migration
  ext4: remove unnecessary wait for extent conversion in ext4_fallocate()
  ext4: add warning to ext4_convert_unwritten_extents_endio
  ext4: disable merging of uninitialized extents
  ...
2013-03-21 17:56:10 -07:00
Dmitry Monakhov 0e401101db ext4: fix memory leakage in mext_check_coverage
Regression was introduced by following commit 8c854473
TESTCASE (git://oss.sgi.com/xfs/cmds/xfstests.git):
#while true;do ./check 301 || break ;done

Also fix potential memory leakage in get_ext_path() once
ext4_ext_find_extent() have failed.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-03-18 11:40:19 -04:00