Commit Graph

1041 Commits

Author SHA1 Message Date
Hans Verkuil 9823f003b9 [media] ov2640: fix colorspace handling
The colorspace is independent of whether YUV or RGB is sent to the SoC.
Fix this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 08:00:34 -03:00
Hans Verkuil a0c4164e0e [media] ov7670: add devicetree support
Add DT support. Use it to get the reset and pwdn pins (if there are any).
Tested with one sensor requiring reset/pwdn and one sensor that doesn't
have reset/pwdn pins.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 07:54:06 -03:00
Hans Verkuil 0a024d634c [media] ov7670: get xclk
Get the clock for this sensor.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 07:53:27 -03:00
Hans Verkuil d569e90bb7 [media] ov7670: fix g/s_parm
Drop unnecesary memset. Drop the unnecessary extendedmode check and
set the V4L2_CAP_TIMEPERFRAME capability.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 07:52:59 -03:00
Hans Verkuil 7d1b8619ea [media] ov7670: call v4l2_async_register_subdev
Add v4l2-async support for this driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10 07:52:31 -03:00
Jose Abreu 2e60ad17b8 [media] i2c: adv7842: Use cec_get_drvdata()
Use helper function to get driver private data from CEC
adapter.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-05 15:19:41 -03:00
Jose Abreu eb10790f18 [media] i2c: adv7604: Use cec_get_drvdata()
Use helper function to get driver private data from CEC
adapter.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-05 15:19:24 -03:00
Jose Abreu 7964f19d38 [media] i2c: adv7511: Use cec_get_drvdata()
Use helper function to get driver private data from CEC
adapter.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-05 15:19:02 -03:00
Bhumika Goyal 6713c88fd0 [media] media: i2c: soc_camera: constify v4l2_subdev_* structures
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle: (One of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_video_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.video=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_video_ops i;

File sizes before and after the changes:
   text	   data	    bss	    dec	    hex	filename

   3459	    696	      0	   4155	   103b	/media/i2c/soc_camera/imx074.o
   3835	    320	      0	   4155	   103b	/media/i2c/soc_camera/imx074.o

   4749	   1048	      8	   5805	   16ad	/media/i2c/soc_camera/mt9m001.o
   5133	    672	      8	   5813	   16b5	/media/i2c/soc_camera/mt9m001.o

   5658	   1112	      8	   6778	   1a7a	/media/i2c/soc_camera/mt9t031.o
   6042	    728	      8	   6778	   1a7a	/media/i2c/soc_camera/mt9t031.o

   6726	    784	      0	   7510	   1d56	/media/i2c/soc_camera/mt9t112.o
   7110	    408	      0	   7518	   1d5e	/media/i2c/soc_camera/mt9t112.o

   6700	    960	     16	   7676	   1dfc	/media/i2c/soc_camera/mt9v022.o
   7084	    584	     16	   7684	   1e04	/media/i2c/soc_camera/mt9v022.o

   5569	   1576	      8	   7153	   1bf1	/media/i2c/soc_camera/ov2640.o
   5953	   1200	      8	   7161	   1bf9	/media/i2c/soc_camera/ov2640.o

   3018	   2736	      0	   5754	   167a	/media/i2c/soc_camera/ov5642.o
   3394	   2352	      0	   5746	   1672	/media/i2c/soc_camera/ov5642.o

   8348	   2104	      8	  10460	   28dc	/media/i2c/soc_camera/ov6650.o
   8716	   1728	      8	  10452	   28d4	/media/i2c/soc_camera/ov6650.o

   4165	    696	      8	   4869	   1305	/media/i2c/soc_camera/ov772x.o
   4549	    320	      8	   4877	   130d	/media/i2c/soc_camera/ov772x.o

   4033	    608	      8	   4649	   1229	/media/i2c/soc_camera/ov9640.o
   4417	    232	      8	   4657	   1231	/media/i2c/soc_camera/ov9640.o

   4983	    784	      8	   5775	   168f	/media/i2c/soc_camera/ov9740.o
   5367	    408	      8	   5783	   1697	/media/i2c/soc_camera/ov9740.o

   8578	   1312	      8	   9898	   26aa i2c/soc_camera/rj54n1cb0c.o
   8962	    936	      8	   9906	   26b2 i2c/soc_camera/rj54n1cb0c.o

   3886	    696	      0	   4582	   11e6	/media/i2c/soc_camera/tw9910.o
   4270	    320	      0	   4590	   11ee	/media/i2c/soc_camera/tw9910.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:43:49 -03:00
Janusz Krzysztofik 54449af0e0 [media] media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
After changes to v4l2_clk API introduced in v4.1 by commits a37462b919
'[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb
'[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor
stopped responding because v4l2_clk_get(), still called with
depreciated V4L2 clock name "mclk", started to return respective CCF
clock instead of the V4l2 one registered by soc_camera. Fix it by
calling v4l2_clk_get() with NULL clock name.

Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera fixes.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-23 14:39:47 -03:00
Javier Martinez Canillas 28af1325e1 [media] soc-camera: ov5642: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:54:29 -03:00
Javier Martinez Canillas 5ace69341c [media] et8ek8: Export OF device ID as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Before this patch:

$ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias
alias:          i2c:et8ek8

After this patch:

$ modinfo drivers/media/i2c/et8ek8/et8ek8.ko | grep alias
alias:          i2c:et8ek8
alias:          of:N*T*Ctoshiba,et8ek8C*
alias:          of:N*T*Ctoshiba,et8ek8

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:18:05 -03:00
Dmitry Torokhov 78cea55c60 [media] ad5820: remove incorrect __exit markups
Even if bus is not hot-pluggable, devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 10:14:12 -03:00
Philipp Zabel fbd4676cc2 [media] tc358743: put lanes in STOP state before starting streaming
Without calling tc358743_set_csi after stopping streaming (or calling
tc358743_s_dv_timings or tc358743_set_fmt from userspace after stopping
the stream), the i.MX6 MIPI CSI2 input fails waiting for lanes to enter
STOP state when streaming is started again.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 10:06:22 -03:00
Mauro Carvalho Chehab 700ea5e0e0 Linux 4.11-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYvHxaAAoJEHm+PkMAQRiGqd8H/1tNYYnkk57WROf2pg4dpT/k
 jK25fO0pC5AzwRd6TGM5I/Pg4Gh+eoXnO/mTiBJwxcvQY09cV2cW+1Pz7R/MLTfY
 lVU4CmQbM96JN1Wz44WS7H25ByYfWChbPmRzSiA0IjdJvm+C7vWFK0cf18i+EbbE
 pHFbFcIlwPx9cGVQQ7YWN5IGJU0mUYK51n1IHMcjHdMDJdBWtS1rjM+mk/O5ZBl/
 p0OpcO9P5HXhljy4xDgHn6uotTvjB/aZudyfsg7b/sGtIX5GKxXHLOAu7x2kM+a7
 G6+L+48GfjHbt6VEdWA8YmFxyl+se3IG0uIVXTz78cVWfOsd33bCE3s0mOhWFVc=
 =kYFG
 -----END PGP SIGNATURE-----

Merge tag 'v4.11-rc1' into patchwork

Linux 4.11-rc1

* tag 'v4.11-rc1': (10730 commits)
  Linux 4.11-rc1
  strparser: destroy workqueue on module exit
  Documentation/sphinx: fix primary_domain configuration
  docs: Fix htmldocs build failure
  doc/ko_KR/memory-barriers: Update control-dependencies section
  pcieaer doc: update the link
  Documentation: Update path to sysrq.txt
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  ...
2017-03-06 06:49:34 -03:00
Arnd Bergmann 3538aa6ecf [media] tc358743: fix register i2c_rd/wr functions
While testing with CONFIG_UBSAN, I got this warning:

drivers/media/i2c/tc358743.c: In function 'tc358743_probe':
drivers/media/i2c/tc358743.c:1930:1: error: the frame size of 2480 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

The problem is that the i2c_rd8/wr8/rd16/... functions in this driver pass
a pointer to a local variable into a common function, and each call to one
of them adds another variable plus redzone to the stack.

I also noticed that the way this is done is broken on big-endian machines,
as we copy the registers in CPU byte order.

To address both those problems, I'm adding two helper functions for reading
a register of up to 32 bits with correct endianess and change all other
functions to use that instead. Just to be sure we don't get the problem
back with changed optimizations in gcc, I'm also marking the new functions
as 'noinline', although my tests with gcc-7 don't require that.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-03 07:22:43 -03:00
Masahiro Yamada c6efb58db4 scripts/spelling.txt: add "swithc" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  swithc||switch
  swithced||switched
  swithcing||switching

Link: http://lkml.kernel.org/r/1481573103-11329-3-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Sakari Ailus bed6838f01 [media] et8ek8: Fix compiler / Coccinelle warnings
Fix a compiler warning due to an unused but assigned variable.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-08 10:37:14 -02:00
Fengguang Wu 26db4d3906 [media] media: fix semicolon.cocci warnings
drivers/media/i2c/et8ek8/et8ek8_driver.c:1112:3-4: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-08 10:33:35 -02:00
Mats Randgaard 676c002af6 [media] tc358743: ctrl_detect_tx_5v should always be updated
The control for +5V Power detection must also be updated when the EDID is
not present.

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 11:16:25 -02:00
Mats Randgaard 0a1f085061 [media] tc358743: Disable HDCP with "manual HDCP authentication" bit
Originally Toshiba told us that the only way to disable HDCP was to
set the receiver in repeater mode, that would make the authentication
fail because of missing software support. It has worked fine with all
the sources we and our customers has used, until it was reported
problems with Apple MacBook (Retina, 12-inch, Early 2015)
(https://support.apple.com/kb/SP712?locale=en_US&viewlocale=en_US)
with Apple A1612 USB type-C multiport adapter
(http://www.apple.com/shop/product/MJ1K2AM/A/usb-c-digital-av-multiport-adapter)

Finally Toshiba came up with a hidden bit that is named "Manual HDCP
authentication". In this patch the original "repeater mode" concept is
removed, and the new bit is set instead.

With his patch HDCP is disabled when connected to the Apple MacBook
and all other sources we have tested so far. The Apple MacBook is
constantly trying to authenticate, but fails and continues to transmit
unencrypted video.

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 11:16:02 -02:00
Mats Randgaard 59e34ba82a [media] tc358743: Do not read number of CSI lanes in use from chip
The number of CSI lanes that should be used is set to the CSI_CONTROL
register by indirectly writing to the CSI_CONFW register. When the
number of lanes is read back from the CSI_CONTROL register the value
is usually correct, but we have seen that it suddenly is 1 for a short
moment before the correct value is restored again.

Toshiba have not figured out why that happen, but we have found it
safer to store the value in the driver.

Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 11:14:40 -02:00
Bhumika Goyal 5610ced4f1 [media] drivers: media: i2c: ml86v7667: constify v4l2_subdev_* structures
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle: (One of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
@@
v4l2_i2c_subdev_init(...,&i@p)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_ops i;

File size before:
  text	   data	    bss	    dec	    hex	filename
   2732	    608	      8	   3348	    d14	drivers/media/i2c/ml86v7667.o

File size after:
  text	   data	    bss	    dec	    hex	filename
   3100	    232	      8	   3340	    d0c	drivers/media/i2c/ml86v7667.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 09:34:43 -02:00
Bhumika Goyal 4d7aa5e991 [media] drivers: media: i2c: ak881x: constify v4l2_subdev_* structures
v4l2_subdev_{core/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle: (One of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_video_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.video=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_video_ops i;

File size before:
  text	   data	    bss	    dec	    hex	filename
   1809	    872	      0	   2681	    a79	drivers/media/i2c/ak881x.o

File size after:
  text	   data	    bss	    dec	    hex	filename
   2185	    496	      0	   2681	    a79	drivers/media/i2c/ak881x.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 09:33:55 -02:00
Bhumika Goyal 646c3ae9d9 [media] media: i2c: m5mols: m5mols_core: constify v4l2_subdev_pad_ops structures
v4l2_subdev_pad_ops structures are stored in the pad field
of the v4l2_subdev_ops structure and this field is of type const.
As the v4l2_subdev_pad_ops structures are never modified, they can be
declared as const.
Done using Coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_pad_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.pad=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_pad_ops i;

File size before:
 text	   data	    bss	    dec	    hex	filename
   7633	    512	     20	   8165	   1fe5	media/i2c/m5mols/m5mols_core.o

File size after:
  text	   data	    bss	    dec	    hex	filename
   7761	    384	     20	   8165	   1fe5	media/i2c/m5mols/m5mols_core.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 09:28:32 -02:00
Nicholas Mc Guire 964481ad0e [media] m5mols: set usleep_range delta greater 0
This delay is in non-atomic context and it does not seem to be
time-critical so relax it to allow the timer subsystem to optimize
hrtimers.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 09:26:52 -02:00
Bhumika Goyal 7c137c601b [media] drivers: media: i2c: constify v4l2_subdev_* structures
v4l2_subdev_{core/pad/video}_ops structures are stored in the
fields of the v4l2_subdev_ops structure which are of type const.
Also, v4l2_subdev_ops structure is passed to a function
having its argument of type const. As these structures are never
modified, so declare them as const.
Done using Coccinelle: (One of the scripts used)

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct v4l2_subdev_video_ops i@p = {...};

@ok1@
identifier r1.i;
position p;
struct v4l2_subdev_ops obj;
@@
obj.video=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct v4l2_subdev_video_ops i;

File sizes before:
  text	   data	    bss	    dec	    hex	filename
   7810	    736	     16	   8562	   2172	drivers/media/i2c/mt9p031.o
   9652	    736	     24	  10412	   28ac	drivers/media/i2c/mt9v032.o
   4613	    552	     20	   5185	   1441	drivers/media/i2c/noon010pc30.o
   2615	    552	      8	   3175	    c67	drivers/media/i2c/s5k6a3.o

File sizes after:
  text	   data	    bss	    dec	    hex	filename
   8322	    232	     16	   8570	   217a	drivers/media/i2c/mt9p031.o
  10164	    232	     24	  10420	   28b4	drivers/media/i2c/mt9v032.o
   4933	    232	     20	   5185	   1441	drivers/media/i2c/noon010pc30.o
   2935	    232	      8	   3175	    c67	drivers/media/i2c/s5k6a3.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-03 09:23:19 -02:00
Nicholas Mc Guire 0df03379c5 [media] ov9650: use msleep() for uncritical long delay
ulseep_range() uses hrtimers and provides no advantage over msleep()
for larger delays. Fix up the 25ms delays here to use msleep() and
reduce the load on the hrtimer subsystem.

Link: http://lkml.org/lkml/2017/1/11/377
Reviwed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 11:54:47 -02:00
Laurent Pinchart 70829035ba [media] v4l: mt9v032: Remove unneeded gpiod NULL check
The gpiod API checks for NULL descriptors, there's no need to duplicate
the check in the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 11:54:15 -02:00
Pavel Machek c5254e72b8 [media] media: Driver for Toshiba et8ek8 5MP sensor
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be
used for taking photos in 2.5MP resolution with fcam-dev.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 10:21:17 -02:00
Andrzej Hajda a2370ba275 [media] v4l: s5c73m3: fix negation operator
Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-31 07:56:49 -02:00
Baruch Siach 5f98e5f555 [media] adv7170: drop redundant ret local
Simplifies return value logic of adv7170_set_fmt().

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:47:05 -02:00
Baruch Siach 30e0e2ed7c [media] ov2659: remove NOP assignment
The loop over the ov2659_formats[] array just a few lines above
verifies that mf->code matches the selected array entry.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:46:29 -02:00
Lars-Peter Clausen da8892d410 [media] adv7604: Initialize drive strength to default when using DT
The adv7604 driver platform data contains fields for configuring the drive
strength of the output pins. When probing the driver through DT these
fields are not explicitly initialized, which means they are left at 0. This
is a reserved setting for the drive strength configuration though and can
cause signal integrity issues.

Whether these signal integrity issues are visible depends on the PCB
specifics (e.g. the higher the load capacitance for the output the more
visible the issue). But it has been observed on existing solutions at high
pixel clock rates.

Initialize the drive strength settings to the power-on-reset value of the
device when probing through devicetree to avoid this issue.

Fixes: 0e158be0162b ("adv7604: Add DT support")

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 15:39:40 -02:00
Christophe JAILLET a5bc63f28a [media] soc-camera: Fix a return value in case of error
If 'ov9640_reg_read()' does not return 0, then 'val' is left unmodified.
As it is not initialized either, the return value can be anything.

It is likely that returning the error code was expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 14:46:44 -02:00
Andi Shyti 0f7499fddb [media] rc-main: assign driver type during allocation
The driver type can be assigned immediately when an RC device
requests to the framework to allocate the device.

This is an 'enum rc_driver_type' data type and specifies whether
the device is a raw receiver or scancode receiver. The type will
be given as parameter to the rc_allocate_device device.

Change accordingly all the drivers calling rc_allocate_device()
so that the device type is specified during the rc device
allocation. Whenever the device type is not specified, it will be
set as RC_DRIVER_SCANCODE which was the default '0' value.

Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30 13:59:57 -02:00
Sakari Ailus bcb63314e2 [media] media: Drop FSF's postal address from the source code files
Drop the FSF's postal address from the source code files that typically
contain mostly the license text. Of the 628 removed instances, 578 are
outdated.

The patch has been created with the following command without manual edits:

git grep -l "675 Mass Ave\|59 Temple Place\|51 Franklin St" -- \
	drivers/media/ include/media|while read i; do i=$i perl -e '
open(F,"< $ENV{i}");
$a=join("", <F>);
$a =~ s/[ \t]*\*\n.*You should.*\n.*along with.*\n.*(\n.*USA.*$)?\n//m
	&& $a =~ s/(^.*)Or, (point your browser to) /$1To obtain the license, $2\n$1/m;
close(F);
open(F, "> $ENV{i}");
print F $a;
close(F);'; done

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2017-01-27 11:38:09 -02:00
Mauro Carvalho Chehab bd361f5de2 Linux 4.10-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYYGCgAAoJEHm+PkMAQRiGjVMH/R1WKLSCVyU2QboSTZVyBGqU
 6E42pMalPNaY72uxf29ZmUzds1uV5KyFn7OntsyD4qc+sQb2wxG5PvMSYAsL7HKN
 lTFiW738zC9Hfx8MzC/fHLGm/7HTHpPFndZJkDOJjIPnS0MeTHAmOFM+RwCRq+px
 5uvRHV4Z8yibHtijET6GqCywV0gw/uyXCi6xJfJNAspnj3hsm3ZXKJ0JPvP2ja+V
 yhdnWYHDEQwRs6FyNtIWnfjH92XilVn4KcOtwnb1pFahALiTmmVqJVMiGartagqJ
 fPRw98B3YHwmZpEc2SDbXaZi36WLu4hcWvvDa22SN/srXwYIzzblEwuNq1+fiBw=
 =X7z+
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc1' into patchwork

Linux 4.10-rc1

* tag 'v4.10-rc1': (11427 commits)
  Linux 4.10-rc1
  powerpc: Fix build warning on 32-bit PPC
  avoid spurious "may be used uninitialized" warning
  mm: add PageWaiters indicating tasks are waiting for a page bit
  mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked
  ktime: Get rid of ktime_equal()
  ktime: Cleanup ktime_set() usage
  ktime: Get rid of the union
  clocksource: Use a plain u64 instead of cycle_t
  irqchip/armada-xp: Consolidate hotplug state space
  irqchip/gic: Consolidate hotplug state space
  coresight/etm3/4x: Consolidate hotplug state space
  cpu/hotplug: Cleanup state names
  cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions
  staging/lustre/libcfs: Convert to hotplug state machine
  scsi/bnx2i: Convert to hotplug state machine
  scsi/bnx2fc: Convert to hotplug state machine
  cpu/hotplug: Prevent overwriting of callbacks
  x86/msr: Remove bogus cleanup from the error path
  bus: arm-ccn: Prevent hotplug callback leak
  ...
2016-12-26 14:11:35 -02:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Arnd Bergmann c739c0a7c3 [media] s5k4ecgx: select CRC32 helper
A rare randconfig build failure shows up in this driver when
the CRC32 helper is not there:

drivers/media/built-in.o: In function `s5k4ecgx_s_power':
s5k4ecgx.c:(.text+0x9eb4): undefined reference to `crc32_le'

This adds the 'select' that all other users of this function have.

Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 07:33:40 -02:00
Laurent Pinchart 79d6205a3f [media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time
The s_stream() handler incorrectly writes the whole MISC_CTL register to
enable or disable the outputs, overriding the output pinmuxing
configuration. Fix it to only touch the output enable bits.

The CONF_SHARED_PIN register is also written by the same function,
resulting in muxing the INTREQ signal instead of the VBLK/GPCL signal on
the INTREQ/GPCL/VBLK pin. As the driver doesn't support interrupts this
is obviously incorrect, and breaks operation on other devices. Fix it by
removing the write.

Cc: stable@vger.kernel.org # For Kernel	4.5 and	upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 07:32:15 -02:00
Laurent Pinchart b4b2de386b [media] v4l: tvp5150: Fix comment regarding output pin muxing
The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently
depending on whether the input is an S-Video or composite signal. The
comment that explains the logic doesn't reflect the code. It appears
that the comment is incorrect, as disabling the output data bus in
composite mode makes no sense. Update the comment to match the code.

While at it define macros for the MISC_CTL register bits, the code is
too confusing with numerical values.

Cc: stable@vger.kernel.org # For Kernel	4.5 and	upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 07:31:49 -02:00
Laurent Pinchart aff808e813 [media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers
The tvp5150 doesn't support format setting through the subdev pad API
and thus implements the set format handler as a get format operation.
The single handler, tvp5150_fill_fmt(), resets the device by calling
tvp5150_reset(). This causes malfunction as the device can be reset at
will, possibly from userspace when the subdev userspace API is enabled.

The reset call was added in commit ec2c4f3f93 ("[media] media:
tvp5150: Add mbus_fmt callbacks"), probably as an attempt to set the
device to a known state before detecting the current TV standard.
However, the get format handler doesn't access the hardware to get the
TV standard since commit 963ddc63e2 ("[media] media: tvp5150: Add
cropping support"). There is thus no need to reset the device when
getting the format.

However, removing the tvp5150_reset() from the get/set format handlers
results in the function not being called at all if the bridge driver
doesn't use the .reset() operation. The operation is nowadays abused and
shouldn't be used, so shouldn't expect bridge drivers to call it. To
make sure the device is properly initialize, move the reset call from
the format handlers to the probe function.

Cc: stable@vger.kernel.org # For Kernel 4.5 and upper
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 07:28:20 -02:00
Sakari Ailus 4bfb934b00 [media] smiapp: Make suspend and resume functions __maybe_unused
The smiapp_suspend() and smiapp_resume() functions will end up being unused
if CONFIG_PM is enabled but CONFIG_PM_SLEEP is disabled, causing a
compiler warning from both of the function definitions. Fix this by
marking the functions with __maybe_unused.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 06:53:35 -02:00
Sakari Ailus 9447082ae6 [media] smiapp: Implement power-on and power-off sequences without runtime PM
Power on the sensor when the module is loaded and power it off when it is
removed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-21 06:53:17 -02:00
Laurent Pinchart d183e4efca [media] v4l: tvp5150: Add missing break in set control handler
A break is missing resulting in the hue control enabling or disabling
the decode completely. Fix it.

Fixes: c43875f661 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control")

Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-12 07:49:58 -02:00
Laurent Pinchart 6e98bee289 [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
The function is large and called in several places, don't inline it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-12 07:43:50 -02:00
Laurent Pinchart 406ff67d58 [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
The function is only referenced as a handler in the tvp5150_sd_media_ops
structure, which is only used when CONFIG_MEDIA_CONTROLLER is set. Don't
define the function and the structure when the configuration option is
unset to avoid an unused function warning.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-12-12 07:43:32 -02:00
Hans Verkuil f51e80804f [media] cec: pass parent device in register(), not allocate()
The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.

Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.

This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-29 12:07:17 -02:00
Mauro Carvalho Chehab e513411489 [media] tvp5150: get rid of KERN_CONT
Unfortunately, KERN_CONT doesn't work with dev_foo(),
producing weird messages like:

	tvp5150 6-005c: tvp5150: read 0xf6 = 0xff
	ff

So, we need to get rid of it.

As we're always printing read/write in hexa when dumping
multiple register values, also remove the "0x" from the
read/write debug messages too.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 10:11:09 -02:00
Mauro Carvalho Chehab ad0e374470 [media] tvp5150: Get rid of direct calls to printk()
When returning results via v4l2_subdev_core_ops.log_status,
use dev_foo() call, instead of just calling printk()
directly, without even specifying the log message level.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 10:10:43 -02:00
Mauro Carvalho Chehab 257e29f84e [media] tvp5150: convert it to use dev_foo() macros
Instead of using v4l_foo(), use the dev_foo() macros, as
most modern media drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 10:10:07 -02:00
Mauro Carvalho Chehab 39ad799a85 [media] msp3400: convert it to use dev_foo() macros
Instead of using the v4l_foo() macros, just use the
kernel-wide dev_foo() macros, as there's no good reason
to use something else.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 10:07:18 -02:00
Mauro Carvalho Chehab b68d75b955 [media] msp3400-driver: don't use KERN_CONT
Drivers using dev_foo() macro should not use KERN_CONT, as, internally,
those macros work as if all strings were terminated by a \n. So, doing:

	dev_info(&client->dev, "%s ", client->name);
	printk(KERN_CONT "supports radio, mode is autodetect and autoselect");

Would produce the following output:

	msp3400 6-0044: msp3400
	supports radio, mode is autodetect and autoselect

As there's no good reason to use KERN_CONT, let's rewrite the code
to avoid that, allowing this driver to be converted to dev_foo().

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-18 10:06:49 -02:00
Mauro Carvalho Chehab 36f94a5cf0 Linux 4.9-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYKLHHAAoJEHm+PkMAQRiGOqoH/iTmywTeevTpx4jbEb8u3LAR
 Bi1ACuBjJKJgYemRPdnH9e1/6nHRkw8EhwUIb2Jv4pyRb+pV2ssxy5sRinY8k9qw
 9pRf+DS9158c5Mc5lZTc3wnRMs49+zowgGpzUjw2HIFoq3E3H0bYpsCl144e4Y8z
 0R6jDKL/YXa9tzVVDTjHG9aG/l0Anc2VzFnWSalNhX5W2PSKc2QtticR3+kTVnA3
 oP4q5UCymdwrZ33XLVldmHqE3n9m8wKGn+gBUMCoJwt5DVRSjqXeT+IkmLdESHEH
 2GyFBE120coYLxTN8CAB4Wa/Woyr0VG6OJvX+Lq3zbnehjteAGOXHzBwYrIOsGc=
 =EwHz
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rc5' into patchwork

Linux 4.9-rc5

* tag 'v4.9-rc5': (1102 commits)
  Linux 4.9-rc5
  gp8psk: Fix DVB frontend attach
  gp8psk: fix gp8psk_usb_in_op() logic
  dvb-usb: move data_mutex to struct dvb_usb_device
  iio: maxim_thermocouple: detect invalid storage size in read()
  aoe: fix crash in page count manipulation
  lightnvm: invalid offset calculation for lba_shift
  Kbuild: enable -Wmaybe-uninitialized warnings by default
  pcmcia: fix return value of soc_pcmcia_regulator_set
  infiniband: shut up a maybe-uninitialized warning
  crypto: aesni: shut up -Wmaybe-uninitialized warning
  rc: print correct variable for z8f0811
  dib0700: fix nec repeat handling
  s390: pci: don't print uninitialized data for debugging
  nios2: fix timer initcall return value
  x86: apm: avoid uninitialized data
  NFSv4.1: work around -Wmaybe-uninitialized warning
  Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"
  lib/stackdepot: export save/fetch stack for drivers
  mm: kmemleak: scan .data.ro_after_init
  ...
2016-11-16 16:42:27 -02:00
Hans Verkuil 0dbacebede [media] cec: move the CEC framework out of staging and to media
The last open issues have been addressed, so it is time to move
this out of staging and into the mainline and to move the public
cec headers to include/uapi/linux.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16 15:40:20 -02:00
Hans Verkuil 827c1f525a [media] adv7604: add vic detect
Obtain the correct timings based on the VIC code from the AVI InfoFrame.

It does a sanity check to see if at least the measured width and height
are in line with what the VIC code reports. If not, then use the timings
instead of the VIC code (as per the CEA-861 spec).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16 15:20:59 -02:00
Arnd Bergmann 9cdbe14fb4 rc: print correct variable for z8f0811
A recent rework accidentally left a debugging printk untouched while
changing the meaning of the variables, leading to an uninitialized
variable being printed:

  drivers/media/i2c/ir-kbd-i2c.c: In function 'get_key_haup_common':
  drivers/media/i2c/ir-kbd-i2c.c:62:2: error: 'toggle' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This prints the correct one instead, as we did before the patch.

Fixes: 00bb820755 ("[media] rc: Hauppauge z8f0811 can decode RC6")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11 08:45:08 -08:00
Sakari Ailus 1ff52fa0f1 [media] ad5820: Fix sparse warning
Use a type with explicit endianness in machine to big endian conversion.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 17:37:12 -02:00
Ulrich Hecht c57a68a152 [media] media: adv7604: automatic "default-input" selection
Documentation states that the "default-input" property should reside
directly in the node of the device.  This adjusts the parsing to make the
implementation consistent with the documentation.

Based on patch by William Towle <william.towle@codethink.co.uk>.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 17:35:17 -02:00
Benoit Parrot 1a33ac00c5 [media] media: i2c: tvp514x: Reported mbus format should be MEDIA_BUS_FMT_UYVY8_2X8
The advertised V4L2 pixel format and Media Bus code don't match.
The current media bud code advertised is MEDIA_BUS_FMT_YUYV8_2X8
which does not reflect what the encoder actually outputs.
This encoder generate MEDIA_BUS_FMT_UYVY8_2X8 so advertise as such.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 17:30:03 -02:00
Sakari Ailus 93bef23024 [media] smiapp: Implement support for autosuspend
Delay suspending the device by 1000 ms by default. This is done on
explicit power off through s_power() callback, through releasing the
file descriptor, NVM read or when the probe finishes.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:42:43 -02:00
Sakari Ailus cbba45d436 [media] smiapp: Use runtime PM
Switch to runtime PM in sensor power management. The internal power count
is thus removed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:42:06 -02:00
Sakari Ailus 4ecc2d75c0 [media] smiapp: Set use suspend and resume ops for other functions
Use the suspend and resume ops for freeze, thaw, poweroff and restore
callbacks as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:40:53 -02:00
Sakari Ailus df77542ede [media] smiapp: Set device for pixel array and binner
The dev field of the v4l2_subdev was left NULL for the pixel array and
binner sub-devices. Fix this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:34:37 -02:00
Sakari Ailus 88b3e311b5 [media] smiapp: Drop BUG_ON() in suspend path
Checking that the mutex is not acquired is unnecessary for user processes
are stopped by this point. Drop the check.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:24:49 -02:00
Sakari Ailus b08726bf2e [media] smiapp-pll: Don't complain aloud about failing PLL calculation
Don't complain about a failure to compute the pre_pll divisor. The
function is used to determine whether a particular combination of bits per
sample value and a link frequency can be used, in which case there are
lots of unnecessary driver messages. During normal operation the failure
generally does not happen. Use dev_dbg() instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:15:06 -02:00
Sakari Ailus fbffb28f03 [media] smiapp: Drop a debug print on frame size and bit depth
The first time the sensor is powered on, the information is not yet
available.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:14:36 -02:00
Sakari Ailus 1b81717ed7 [media] smiapp: Obtain correct media bus code for try format
The media bus code obtained for try format may have been a code that the
sensor did not even support. Use a supported code with the current pixel
order.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:13:26 -02:00
Sakari Ailus 2aa8e838a3 [media] smiapp: Remove useless newlines and other small cleanups
The code probably has been unindented at some point but rewrapping has not
been done. Do it now.

Also remove a useless memory allocation failure message.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:10:44 -02:00
Sakari Ailus e43665a9d7 [media] smiapp: Improve debug messages from frame layout reading
Provide more debugging information on reading the frame layout.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:09:40 -02:00
Sakari Ailus 3fc34b7beb [media] smiapp: Obtain frame layout from the frame descriptor
Besides the image data, SMIA++ compliant sensors also provide embedded
data in form of registers used to capture the image. Store this
information for later use in frame descriptor and routing.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:09:06 -02:00
Sakari Ailus df0e40339b [media] smiapp: Use SMIAPP_PADS when referring to number of pads
Replace plain value 2 with SMIAPP_PADS when referring to the number of
pads.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:08:13 -02:00
Sakari Ailus a118e61edc [media] smiapp: Unify setting up sub-devices
The initialisation of the source sub-device is somewhat different as it's
not created by the smiapp driver itself. Remove redundancy in initialising
the two kind of sub-devices.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:07:38 -02:00
Sakari Ailus 1344bf74c9 [media] smiapp: Read frame format earlier
The information gathered during frame format reading will be required
earlier in the initialisation when it was available. Also return an error
if frame format cannot be obtained.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:04:28 -02:00
Sakari Ailus 3ecb86641b [media] smiapp: Merge smiapp_init() with smiapp_probe()
The smiapp_probe() is the sole caller of smiapp_init(). Unify the two.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:03:52 -02:00
Sakari Ailus 9976954075 [media] smiapp: Fix resource management in registration failure
If the registered() callback failed, resources were left unaccounted for.
Fix this, as well as add unregistering the sub-devices in driver
unregistered() callback.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:03:04 -02:00
Sakari Ailus 231d1a014a [media] smiapp: Always initialise the sensor in probe
Initialise the sensor in probe. The reason why it wasn't previously done
in case of platform data was that the probe() of the driver that provided
the clock through the set_xclk() callback would need to finish before the
probe() function of the smiapp driver. The set_xclk() callback no longer
exists.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 15:00:06 -02:00
Sakari Ailus 624e9896c5 [media] smiapp: Remove unnecessary BUG_ON()'s
Instead, calculate how much is needed and then allocate the memory
dynamically.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:59:07 -02:00
Sakari Ailus 6c5ff7c8e8 [media] smiapp: Provide a common function to obtain native pixel array size
The same pixel array size is required for the active format of each
sub-device sink pad and try format of each sink pad of each opened file
handle as well as for the native size rectangle.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:58:22 -02:00
Sakari Ailus 2fca9ca0d6 [media] smiapp: Split off sub-device registration into two
Remove the loop in sub-device registration and create each sub-device
explicitly instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:55:31 -02:00
Sakari Ailus 6d8d61fe66 [media] smiapp: Initialise media entity after sensor init
This allows determining the number of pads in the entity based on the
sensor.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:20:01 -02:00
Sakari Ailus cc1488a1fc [media] smiapp: Explicitly define number of pads in initialisation
Define the number of pads explicitly in initialising the sub-devices.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:18:24 -02:00
Sakari Ailus b7547ef867 [media] smiapp: Move sub-device initialisation into a separate function
Simplify smiapp_init() by moving the initialisation of individual
sub-devices to a separate function.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 14:17:36 -02:00
Mauro Carvalho Chehab 8f44c39251 [media] soc_camera: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 08:51:50 -02:00
Mauro Carvalho Chehab 4b68f05e4d [media] smiapp: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 08:51:34 -02:00
Mauro Carvalho Chehab 72cc0671b0 [media] cx25840: don't break long lines
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
	if ($next ne "") {
		$c=$_;
		if ($c =~ /^\s+\"(.*)/) {
			$c2=$1;
			$next =~ s/\"\n$//;
			$n = expand($next);
			$funpos = index($n, '(');
			$pos = index($c2, '",');
			if ($funpos && $pos > 0) {
				$s1 = substr $c2, 0, $pos + 2;
				$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
				$s2 =~ s/^\s+//;

				$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

				print unexpand("$next$s1\n");
				print unexpand("$s2\n") if ($s2 ne "");
			} else {
				print "$next$c2\n";
			}
			$next="";
			next;
		} else {
			print $next;
		}
		$next="";
	} else {
		if (m/\"$/) {
			if (!m/\\n\"$/) {
				$next=$_;
				next;
			}
		}
	}
	print $_;
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 08:51:33 -02:00
Mauro Carvalho Chehab 178991e03c [media] tvaudio: mark printk continuation lines as such
This driver has printk continuation lines for
debugging purposes. Since commit 563873318d
("Merge branch 'printk-cleanups'"), this won't work as expected
anymore. So, let's add KERN_CONT to those lines.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-21 08:51:29 -02:00
Sean Young 00bb820755 [media] rc: Hauppauge z8f0811 can decode RC6
The hardware does not decode the 16, 20 or 24 bit variety.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-22 11:44:52 -03:00
Sylwester Nawrocki cb47b415fd [media] s5c73m3: Fix entity function assignment for the OIF subdev
Suppresses warnings like:
s5p-fimc-md camera: Entity type for entity S5C73M3-OIF was not initialized!

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-22 10:15:36 -03:00
Sylwester Nawrocki 654fa10392 [media] s5k6a3: Add missing entity function initialization
Suppresses warning like:
s5p-fimc-md camera: Entity type for entity S5K6A3 13-0010 was not initialized!

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-22 10:15:16 -03:00
Niklas Söderlund e0ad7a9b90 [media] media: adv7180: fill in mbus format in set_fmt
If the V4L2_SUBDEV_FORMAT_TRY is used in set_fmt the width, height etc
would not be filled.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 16:31:04 -03:00
Niklas Söderlund 6de690dd4e [media] adv7180: rcar-vin: change mbus format to UYVY
The media bus format reported by the adv7180 is wrong. Steve Longerbeam
posted a patch which changed the format to UYVY8_2X8 with the commit
message:

  Change the media bus format from YUYV8_2X8 to UYVY8_2X8. Colors
  now look correct when capturing with the i.mx6 backend. The other
  option is to set the SWPC bit in register 0x27 to swap the Cr and Cb
  output samples.

The rcar-vin driver was developed and tested with the adv7180 and
therefor suffers from the same issue, looking for the wrong media bus
format. The two errors corrected each other.

This patch takes Steve's patch and merge it with a fix for rcar-vin
driver. The rcar-vin driver is used used in together with the adv7180
och Koelsch and this ensures it will not break while fixing the adv7180
issue. I checked wit Steve and he was fine with me merging the patches.

ADV7180 parts:

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Suggested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 16:30:20 -03:00
Arnd Bergmann 37f0644f3a [media] ad5820: use __maybe_unused for PM functions
The new ad5820 driver uses #ifdef to hide the suspend/resume functions,
but gets it wrong when CONFIG_PM_SLEEP is disabled:

drivers/media/i2c/ad5820.c:286:12: error: 'ad5820_resume' defined but not used [-Werror=unused-function]
drivers/media/i2c/ad5820.c:274:12: error: 'ad5820_suspend' defined but not used [-Werror=unused-function]

This replaces the #ifdef with a __maybe_unused annotation that is
simpler and harder to get wrong, avoiding the warning.

Fixes: bee3d51156 ("[media] ad5820: Add driver for auto-focus coil")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 16:25:13 -03:00
Julia Lawall db83d08dee [media] constify local structures
For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 16:22:18 -03:00
Javier Martinez Canillas 6dca6cf072 [media] ov9650: add support for asynchronous probing
Allow the sub-device to be probed asynchronously so a bridge driver that's
waiting for the device can be notified and its .bound callback executed.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: H . Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 16:20:02 -03:00
Hans Verkuil 8283a09299 [media] media Kconfig: improve the spi integration
The SPI driver looked a bit lonely in the config menu, and it didn't
support the autoselect. Shift things around a bit so it looks more logical.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 14:37:05 -03:00
Sakari Ailus 3933186aec [media] ad5820: Use bool for boolean values
The driver used integers for what boolean would have been a better fit.
Use boolean instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 11:22:02 -03:00
Sakari Ailus dc3cdbc9d4 [media] smiapp: Add support for 14 and 16 bits per sample depths
SMIA++ supports 14 and 16 bits per pixel formats as well. Add support to
these formats in the driver.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 11:17:08 -03:00
Robert Jarzmik c61e74e3a8 [media] media: mt9m111: move mt9m111 out of soc_camera
As the mt9m111 is now working as a standalone v4l2 subdevice sensor,
move it out of soc_camera directory and sever its dependency on
soc_camera.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 10:41:17 -03:00
Robert Jarzmik 1a412faa7a [media] media: mt9m111: use only the SRGB colorspace
mt9m111 being a camera sensor, its colorspace should always be SRGB, for
both RGB based formats or YCbCr based ones.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 10:40:20 -03:00
Robert Jarzmik 5d7cc01b20 [media] media: mt9m111: make a standalone v4l2 subdevice
Remove the soc_camera adherence. Mostly the change removes the power
manipulation provided by soc_camera, and instead :
 - powers on the sensor when the s_power control is activated
 - powers on the sensor in initial probe
 - enables and disables the MCLK provided to it in power on/off

This patch also drops support for inverters on synchronisation and clock
lines. It is assumed, if any board ever needs such inverters, support
for them can be added in the future

Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 10:39:53 -03:00
Markus Elfring 43c784aab7 [media] media/i2c: Delete owner assignment
The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-06 16:21:24 -03:00
Sakari Ailus e62c30e768 [media] smiapp: Remove set_xclk() callback from hwconfig
The clock framework is generally so well supported that there's no reason
to keep this one around.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:53:20 -03:00
Sakari Ailus 567716c581 [media] smiapp: Switch to gpiod API for GPIO control
Switch from the old gpio API to the new descriptor based gpiod API.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:52:33 -03:00
Sakari Ailus 7374300191 [media] smiapp: Constify the regs argument to smiapp_write_8s()
The data may now be const as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:51:18 -03:00
Sakari Ailus 51d2d72b66 [media] smiapp: Return -EPROBE_DEFER if the clock cannot be obtained
The clock may be provided by a driver which is yet to probe. Print the
actual error code as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:50:46 -03:00
Sakari Ailus 697a521fbc [media] smiapp: Rename smiapp_platform_data as smiapp_hwconfig
This is really configuration to the driver originating from DT or
elsewhere. Do not call it platform data.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:40:02 -03:00
Sakari Ailus 073fe63513 [media] smiapp: Unify enforced and need-based 8-bit read
Unify enforced 8-bit read access with that based on actual need.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05 15:39:11 -03:00
Javier Martinez Canillas 5a08bc008d [media] tvp5150: use sd internal ops .registered instead .registered_async
The driver is using the struct v4l2_subdev_core_ops .registered_async
callback to register the connector entities and create the pad links
after the subdev entity has been registered with the media device.

But the .registered_async callback isn't needed since the v4l2 core
already calls the struct v4l2_subdev_internal_ops .registered callback
in v4l2_device_register_subdev(), after media_device_register_entity().

So, use the .registered() callback instead of the .registered_async()
that is going to be removed in a following patch since isn't needed.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 16:49:18 -03:00
Wei Yongjun b956fb2d2e [media] adv7511: fix error return code in adv7511_probe()
Fix to return error code -ENOMEM from the i2c client register error
handling case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 13:47:02 -03:00
Hans Verkuil ecf37493f4 [media] v4l2-subdev: rename cropcap to g_pixelaspect
The old cropcap video op is now only used to pass the pixelaspect
ratio, so rename it.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:55:15 -03:00
Hans Verkuil 10d5509c8d [media] v4l2: remove g/s_crop from video ops
Replace all calls to g/s_crop by calls to the get/set_selection pad ops.

Remove the old g/s_crop video ops since they are now no longer used.

The cropcap video op is now only used to pass pixelaspect information,
and is only needed if the pixelaspect is not 1:1.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:46:09 -03:00
Steve Longerbeam 65d9e14a65 [media] media: adv7180: add power pin control
Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:43:40 -03:00
Steve Longerbeam ce5d6290df [media] media: adv7180: define more registers
Replace hard-coded addresses with new register macro defines. No
functional changes.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:42:25 -03:00
Bhaktipriya Shridhar 969ac39e3d [media] ad9389b: Remove deprecated create_singlethread_workqueue
The workqueue work_queue is involved in EDID (Extended Display
Identification Data) handling.

It has a single work item(&state->edid_handler) and hence
doesn't require ordering. It is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with
the use of system_wq.

&state->edid_handler is a self requeueing work item and it has been
been sync cancelled in ad9389b_remove() to ensure that nothing is
pending when the driver is disconnected.

The unused label err_unreg has also been dropped.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:31:26 -03:00
Mauro Carvalho Chehab 1ee6dd5a91 [media] ad5820: fix one smatch warning
drivers/media/i2c/ad5820.c:61:24: error: dubious one-bit signed bitfield

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 08:21:38 -03:00
Pavel Machek bee3d51156 [media] ad5820: Add driver for auto-focus coil
This adds support for AD5820 autofocus coil, found for example in
Nokia N900 smartphone.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 08:09:41 -03:00
Steve Longerbeam 52e37f0a66 [media] media: adv7180: Fix broken interrupt register access
Access to the interrupt page registers has been broken since at least
commit 3999e5d01d ("[media] adv7180: Do implicit register paging").
That commit forgot to add the interrupt page number to the register
defines.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-28 20:14:59 -03:00
Hans Verkuil bd3276a332 [media] adv7511: fix VIC autodetect
The adv7511 will automatically fill in the VIC code in the AVI InfoFrame
based on the timings of the incoming pixelport signals.

However, to have this work correctly it needs to specify the fps
value in a register. After doing this the proper VIC code is filled in.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-28 20:13:26 -03:00
Hans Verkuil 65898fb99c [media] adv7511: the h/vsync polarities were always positive
Correctly set the h/vsync polarities instead of keeping to the
default (positive).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 13:37:41 -03:00
Hans Verkuil fd74246d2a [media] adv7604/adv7842: fix quantization range handling
Fix a number of bugs that appeared when support for mediabus formats was
added:

- Support for V4L2_DV_RGB_RANGE_FULL/LIMITED should only be enabled
  for HDMI RGB formats, not for YCbCr formats. Since, as the name
  says, this setting is for RGB only. So read the InfoFrame to check
  the format.

- the quantization range for the pixelport depends on whether the
  mediabus code is RGB or not: if it is RGB, then produce full range
  RGB values, otherwise produce limited range YCbCr values.

  This means that the op_656_range and alt_data_sat fields of the
  platform data are no longer used and these will be removed in a
  following patch.

- when setting up a new format the RGB quantization range settings
  were never updated. Do so, since this depends on the format.

- fix the log_status output which was confusing and incorrect.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 13:35:46 -03:00
Hans Verkuil 0a25a01251 [media] adv7511: fix quantization range handling
Commit 1fb69bfd29 (adv7511: improve
colorspace handling) introduced a number of bugs, specifically with
regards to YCbCr output and quantization range handling:

- if the output is not RGB, then disable the full-to-limited range
  CSC matrix since that is meant for RGB formats. YCbCr formats are
  always limited range, so there is nothing to convert. (OK, full
  range YCbCr is possible, but we don't support that right now).

- the mediabus code that was passed to adv7511_set_fmt was always cleared
  by the memset in adv7511_fill_format. This made it effectively impossible
  to select YCbCr output.

- adv7511_set_fmt never updated the rgb quantization range.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 13:33:56 -03:00
Hans Verkuil afd620f81b [media] adv7511: drop adv7511_set_IT_content_AVI_InfoFrame
The IT Content bit has nothing to do with CE vs IT timings.
Delete this code. This will also fix a bug where this could
override the 'content type' control, which is actually the
correct place to set/clear the ITC bit.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 13:33:15 -03:00
Hans Verkuil 743eb09f4c [media] media/i2c: drop the last users of the ctrl core ops
Nobody is using these ops anymore, so remove these callbacks from
the subdev drivers that still have them.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-12 11:17:19 -03:00
Mauro Carvalho Chehab cbb5c8355a Merge branch 'topic/cec' into patchwork
* topic/cec:
  [media] DocBook/media: add CEC documentation
  [media] s5p_cec: get rid of an unused var
  [media] move s5p-cec to staging
  [media] vivid: add CEC emulation
  [media] cec: s5p-cec: Add s5p-cec driver
  [media] cec: adv7511: add cec support
  [media] cec: adv7842: add cec support
  [media] cec: adv7604: add cec support
  [media] cec: add compat32 ioctl support
  [media] cec/TODO: add TODO file so we know why this is still in staging
  [media] cec: add HDMI CEC framework (api)
  [media] cec: add HDMI CEC framework (adapter)
  [media] cec: add HDMI CEC framework (core)
  [media] cec-funcs.h: static inlines to pack/unpack CEC messages
  [media] cec.h: add cec header
  [media] cec-edid: add module for EDID CEC helper functions
  [media] cec.txt: add CEC framework documentation
  [media] rc: Add HDMI CEC protocol handling
2016-07-08 18:16:10 -03:00
Dragos Bogdan f5591da992 [media] adv7604: Add support for hardware reset
The part can be reset by a low pulse on the RESET pin (i.e. a hardware
reset) with a minimum width of 5 ms. It is recommended to wait 5 ms
after the low pulse before an I2C write is performed to the part.
For safety reasons, the delays will be between 5 and 10 ms.

The RESET pin can be tied high, so the GPIO is optional.

Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 16:37:10 -03:00
Bhaktipriya Shridhar 0423ff9bd4 [media] adv7604: Remove deprecated create_singlethread_workqueue
The workqueue "work_queues" enables hotplugging.
It has a single work item(&state->delayed_work_enable_hotplug) and hence
doesn't require ordering. Also, it is not being used on a memory
reclaim path. Hence, the singlethreaded workqueue has been replaced with
the use of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been sync cancelled in adv76xx_remove() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 15:02:22 -03:00
Bhaktipriya Shridhar 1ce3954657 [media] tc358743: Remove deprecated create_singlethread_workqueue
The workqueue "work_queues" enables hotplugging.
It has a single work item(&state->delayed_work_enable_hotplug) and hence
doesn't require ordering. Also, it is not being used on a memory
reclaim path. Hence, the singlethreaded workqueue has been replaced with
the use of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been sync cancelled in tc358743_remove() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 15:01:18 -03:00
Bhaktipriya Shridhar 1d3e15436f [media] adv7842: Remove deprecated create_singlethread_workqueue
The workqueue "work_queues" enables hotplugging.
It has a single work item(&state->delayed_work_enable_hotplug) and hence
doesn't require ordering. Also, it is not being used on a memory
reclaim path. Hence, the singlethreaded workqueue has been replaced with
the use of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been sync cancelled in adv7842_remove() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 15:00:23 -03:00
Hans Verkuil 257d4eaed3 [media] cec: adv7511: add cec support
Add CEC support to the adv7511 driver.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 10:04:47 -03:00
Hans Verkuil 25c84fb1c9 [media] cec: adv7842: add cec support
Add CEC support to the adv7842 driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 10:01:43 -03:00
Hans Verkuil 41a523735d [media] cec: adv7604: add cec support
Add CEC support to the adv7604 driver.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
[k.debski@samsung.com: add missing methods cec/io_write_and_or]
[k.debski@samsung.com: change adv7604 to adv76xx in added functions]
[hansverk@cisco.com: use _clr_set instead of _and_or]

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 10:00:50 -03:00
Laurent Pinchart 9c41e69086 [media] adv7604: Don't ignore pad number in subdev DV timings pad operations
The dv_timings_cap() and enum_dv_timings() pad operations take a pad
number as an input argument and return the DV timings capabilities and
list of supported DV timings for that pad.

Commit bd3e275f3e ("[media] media: i2c: adv7604: Use v4l2-dv-timings
helpers") broke this as it started ignoring the pad number, always
returning the information associated with the currently selected input.
Fix it.

Fixes: bd3e275f3e ("[media] media: i2c: adv7604: Use v4l2-dv-timings helpers")

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 08:02:39 -03:00
Markus Pargmann 81ea482909 [media] v4l: mt9v032: Add V4L2 controls for AEC and AGC
This patch adds V4L2 controls for Auto Exposure Control and Auto Gain
Control settings. These settings include low pass filter, update
frequency of these settings and the update interval for those units.

[Avoid forward declarations]
[Fix 80 columns limit violation]
[Rename controls to avoid underscores in names]
[Fix the AEC maximum shutter width on MT9V032]

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 08:01:51 -03:00
Markus Pargmann 78060d5195 [media] v4l: mt9v032: Do not unset master_mode
The power_on function of the driver resets the chip and sets the
CHIP_CONTROL register to 0. This switches the operating mode to slave.
The s_stream function sets the correct mode. But this caused problems on
a board where the camera chip is operated as master. The camera started
after a random amount of time streaming an image, I observed between 10
and 300 seconds.

The STRFM_OUT and STLN_OUT pins are not connected on this board which
may cause some issues in slave mode. I could not find any documentation
about this.

Keeping the chip in master mode after the reset helped to fix this
issue for me.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:58:58 -03:00
Axel Lin f823a3fd4b [media] v4l: mt9v032: Remove duplicate test for I2C_FUNC_SMBUS_WORD_DATA functionality
Since commit b42261078a ("regmap: i2c: fallback to SMBus if the adapter
does not support standard I2C"), regmap-i2c will check the
I2C_FUNC_SMBUS_[BYTE|WORD]_DATA functionality based on the regmap_config
setting if the adapter does not support standard I2C.

So remove the I2C_FUNC_SMBUS_WORD_DATA functionality check in the driver code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:58:10 -03:00
Laurent Pinchart 41d9ec0a2f [media] v4l: mt9v032: Remove unneeded header
The of_gpio.h header isn't needed, don't include it.

Reported-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:56:12 -03:00
Guennadi Liakhovetski e2b5639714 [media] v4l: mt9t001: fix clean up in case of power-on failures
If the driver fails to reset the camera or to set up control handlers, it
has to power the camera back off.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:55:39 -03:00
Julia Lawall 80d23ff6b3 [media] v4l: mt9t001: constify v4l2_subdev_internal_ops structure
This v4l2_subdev_internal_ops structure is never modified.  All other
v4l2_subdev_internal_ops structures are declared as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:55:02 -03:00
Sakari Ailus a92320e9b6 [media] smiapp: Remove useless rval assignment in smiapp_get_pdata()
The value is not used after the assignment.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-28 07:54:30 -03:00
Mauro Carvalho Chehab 60eb9579c1 adv7842: comment out a table useful for debug
Gcc 6.1 warns about an unused table:

drivers/media/i2c/adv7842.c:2400:27: warning: 'prim_mode_txt' defined but not used [-Wunused-const-variable=]
 static const char * const prim_mode_txt[] = {
                           ^~~~~~~~~~~~~

That seems to be useful for debug, and likely were used before.
While we could simply remove, let's comment it out, for now.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-24 12:17:27 -03:00
Arnd Bergmann 287980e49f remove lots of IS_ERR_VALUE abuses
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.

However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.

Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.

This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.

Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.

I was using this definition for testing:

 #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
       unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))

which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.

I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.

[ Updated the 9p parts as per Al Viro  - Linus ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 15:26:11 -07:00
Javier Martinez Canillas eca4ca84a9 [media] tvp5150: propagate I2C write error in .s_register callback
The tvp5150_write() function can fail so don't return 0 unconditionally
in tvp5150_s_register() but propagate what's returned by tvp5150_write().

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-09 14:44:38 -03:00
Javier Martinez Canillas cacdd6a4a8 [media] tvp5150: return I2C write operation failure to callers
The tvp5150_write() function calls i2c_smbus_write_byte_data() that
can fail but does not propagate the error to the caller. Instead it
just prints a debug, so callers can't know if the operation failed.

So change the function to return the error code to the caller so it
knows that the write failed and also print an error instead of just
printing a debug information.

While being there remove the inline keyword from tvp5150_write() to
make it consistent with tvp5150_read() and also because it's called
in a lot of places, so making inline is in fact counter productive
since it makes the kernel image size to be much bigger (~16 KiB).

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-09 14:44:16 -03:00
Colin Ian King 00303f9134 [media] media: i2c: ths7303: remove redundant assignment on bt
The extraneous assignment on bt is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-07 11:47:12 -03:00
Kevin Fitch 7e31223ff0 [media] i2c: saa7115: Support CJC7113 detection
It's been reported that CJC7113 devices are returning
all 1s when reading register 0:

  "1111111111111111" found @ 0x4a (stk1160)

This new device is apparently compatible with SA7113, so let's
add a quirk to allow its autodetection. Given there isn't
any known differences with SAA7113, this commit does not
introduces a new saa711x_model value.

Reported-by: Philippe Desrochers <desrochers.philippe@gmail.com>
Signed-off-by: Kevin Fitch <kfitch42@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-06 15:52:51 -03:00
Ivaylo Dimitrov 92021e074a [media] smiapp: provide g_skip_top_lines method in sensor ops
Some sensors (like the one in Nokia N900) provide metadata in the first
couple of lines. Make that information information available to the
pipeline.

Use u16 instead, this is a 16-bit value.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-06 15:40:04 -03:00
Vladimir Zapolskiy 806f8ffa8a [media] media: i2c/adp1653: fix check of devm_gpiod_get() error code
The devm_gpiod_get() function returns either a valid pointer to
struct gpio_desc or ERR_PTR() error value, check for NULL is bogus.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-06 15:39:17 -03:00
Julian Scheel bf14e74cef [media] media: adv7180: Add of compatible strings for full family
Add entries for all supported chip variants into the of_match list, so that
the matching driver_info can be selected when using dt.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-05-06 10:16:29 -03:00