To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.
This is a step towards introducing drivers/Kconfig for arm.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* 'cris' of git://www.jni.nu/cris: (158 commits)
CRIS v32: Remove hwregs/timer_defs.h, it is now architecture specific.
CRIS v32: Change drivers/i2c.c locking.
CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup.
CRIS: Add new timerfd syscall entries.
MAINTAINERS: Add my information for the CRIS port.
CRIS v32: Correct spelling of bandwidth in function name.
CRIS v32: Clean up nandflash.c for ARTPEC-3 and ETRAX FS.
CRIS v10: Cleanup of drivers/gpio.c
CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash.
CRIS: Make io_pwm_set_period members unsigned in etraxgpio.h
CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file.
CRIS: Drop regs parameter from call to profile_tick in kernel/time.c
CRIS v32: Fix minor formatting issue in mach-a3/io.c
CRIS v32: Initialize GIO even if we're rambooting in kernel/head.S
CRIS v32: Remove kernel/arbiter.c, it now exists in machine dependent directory.
CRIS v32: Minor changes to avoid errors in asm-cris/arch-v32/hwregs/reg_rdwr.h
CRIS v32: arch-v32/hwregs/intr_vect_defs.h moved to machine dependent directory.
CRIS v32: Correct offset for TASK_pid in asm-cris/arch-v32/offset.h
CRIS v32: Move register map header to machine dependent directory.
CRIS v32: Let compiler know that memory is clobbered after a break op.
...
When the conversion factor between jiffies and milli- or microseconds is
not a single multiply or divide, as for the case of HZ == 300, we currently
do a multiply followed by a divide. The intervening result, however, is
subject to overflows, especially since the fraction is not simplified (for
HZ == 300, we multiply by 300 and divide by 1000).
This is exposed to the user when passing a large timeout to poll(), for
example.
This patch replaces the multiply-divide with a reciprocal multiplication on
32-bit platforms. When the input is an unsigned long, there is no portable
way to do this on 64-bit platforms there is no portable way to do this
since it requires a 128-bit intermediate result (which gcc does support on
64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but
since the output is a 32-bit integer in the cases affected, just simplify
the multiply-divide (*3/10 instead of *300/1000).
The reciprocal multiply used can have off-by-one errors in the upper half
of the valid output range. This could be avoided at the expense of having
to deal with a potential 65-bit intermediate result. Since the intent is
to avoid overflow problems and most of the other time conversions are only
semiexact, the off-by-one errors were considered an acceptable tradeoff.
At Ralf Baechle's suggestion, this version uses a Perl script to compute
the necessary constants. We already have dependencies on Perl for kernel
compiles. This does, however, require the Perl module Math::BigInt, which
is included in the standard Perl distribution starting with version 5.8.0.
In order to support older versions of Perl, include a table of canned
constants in the script itself, and structure the script so that
Math::BigInt isn't required if pulling values from said table.
Running the script requires that the HZ value is available from the
Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the
architectures which didn't already have it (alpha, cris, frv, h8300, m32r,
m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or
sh64 architectures, since Paul Mundt has dealt with those separately in the
sh tree.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Paul Mundt <lethal@linux-sh.org>,
Cc: Richard Henderson <rth@twiddle.net>,
Cc: Michael Starvik <starvik@axis.com>,
Cc: David Howells <dhowells@redhat.com>,
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
Cc: Hirokazu Takata <takata@linux-m32r.org>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>,
Cc: William L. Irwin <sparclinux@vger.kernel.org>,
Cc: Chris Zankel <chris@zankel.net>,
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Change spin_lock + local_irq_save into spin_lock_irqsave
- Change spin_unlock + local_irq_restore into spin_unlock_irqrestore
- Return ENOTTY if ioctl is not recognized as a cris ioctl.
- Make init functions static.
Changes as suggested by Andrew Morton, plus general cleanup to
ease later consolidation of driver into machine common driver.
- Correct parameter type of gpio_write to const char __user *
- Remove volatile from the arrays of machine dependent registers, use
readl and writel to access them instead.
- Remove useless casts of void.
- Use spin_lock_irqsave for locking.
- Break gpio_write into smaller sub-functions.
- Remove useless breaks after returns.
- Don't perform any change in IO_CFG_WRITE_MODE if values are invalid.
(previously values were set and then set to zero)
- Change cast for copy_to_user to (void __user *)
- Make file_operations gpio_fops static and const.
- Make setget_output static. (However, it's still inline since the CRIS
architecture is still not SMP, which makes the function small enough
to inline)
Clean up issues noticed by Andrew Morton:
- Use a combined struct for allocating the mtd_info and nand_chip structs
instead of using anonymous memory as the example in
Documentation/DocBook/mtdnand.tmpl
- Use kzalloc instead of using kmalloc/memset(0)
- Make crisv32_device_ready static.
- Change parameters of gpio_write (const char * buf -> const char __user *buf)
- Don't initialize static variables to zero.
- Remove useless casts from void.
- Change name of interrupt routine (gpio_pa_interrupt -> gpio_interrupt)
- Use kzmalloc instead of allocating memory and zeroing it manually.
- Correct casts for copy_to_user and copy_from_user to (void __user *)
- Make file_operations gpio_fops static.
- Make ioif_watcher static, not used outside this file.
- Move alignment of init data to page size outside define CONFIG_BLK_DEV_INITRD
This avoids oops due to memory on the same page as init data being freed.
- Change hardcoded page size to use macro from asm/page.h
- Add reserved memory via CONFIG_ETRAX_VMEM_SIZE.
- Use available defines for TEXT_TEXT and INITCALLS.
- Cleanup whitespace.
- Slight tweaks, use $acr + addoq to propagate carry across the loop boundary.
- Better use of latency cycles.
- Remove duplicate folding of carry, it is not needed.
- Change include paths to machine specific headers (asm/arch/hwregs -> hwregs)
- Add cpu_possible_map as cpumask_t and export it.
- Drop struct pt_regs parameter from crisv32_ipi_interrupt.
- timer -> timer0
- do_signal now returns void, and does not have the previous signal set
as a parameter.
- Remove sys_rt_sigsuspend, we can use the common one instead.
- Change sys_sigsuspend to be more like x86, don't call do_signal here.
- handle_signal, setup_frame and setup_rt_frame now return -EFAULT
if we've delivered a segfault, which is used by callers to perform
necessary cleanup.
- Break long lines, correct whitespace and formatting errors.
- Change all spin_lock/local_irq_save to spin_lock_irqsave.
- Change multiple returns in functions where we have a lock to goto out.
- Correct number of arguments to gpio_poll_timer_interrupt, gpio_pa_interrupt.
- Break out gpio_write logic to smaller functions to make it readable.
- In setget_input and setget_output, avoid extra if-indent level.
- Change name LED_* -> CRIS_LED_* to avoid name clash.
- Don't use braces around single statement ifs.
- Fix whitespace errors.
- Remove useless CVS id and log.
- Don't use SANITYCHECK(x) as a macro, test FAST_TIMER_SANITY_CHECKS with
ifdef. This makes it possible for automatic indent etc to work.
- Correct some whitespace errors.
- Don't initialize static variable.
- Include pinmux.h from machine specific directory.
- Add some more symbols: crisv32_pinmux_alloc, crisv32_pinmux_dealloc_fixed,
crisv32_io_get_name and crisv32_io_get
- Moved all calls to register_chrdev to a function called by module_init.
- Added mutex locking.
- Added better error handling at start up.
- Added BIN_TO_BCD of the month value before it is saved to the RTC.
- Corrected the month value returned by pcf8563_readreg.
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Removed obsolete CONFIG_ETRAX_RTC_READONLY
- Voltage low ioctl():s RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
Sam Ravnborg