Commit Graph

35 Commits

Author SHA1 Message Date
Will Deacon 905e8c5dca arm64: errata: add workaround for cortex-a53 erratum #845719
When running a compat (AArch32) userspace on Cortex-A53, a load at EL0
from a virtual address that matches the bottom 32 bits of the virtual
address used by a recent load at (AArch64) EL1 might return incorrect
data.

This patch works around the issue by writing to the contextidr_el1
register on the exception return path when returning to a 32-bit task.
This workaround is patched in at runtime based on the MIDR value of the
processor.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-01 10:24:31 +01:00
Catalin Marinas 0156411b18 arm64: Implement the compat_sys_call_table in C
Unlike the sys_call_table[], the compat one was implemented in sys32.S
making it impossible to notice discrepancies between the number of
compat syscalls and the __NR_compat_syscalls macro, the latter having to
be defined in asm/unistd.h as including asm/unistd32.h would cause
conflicts on __NR_* definitions. With this patch, incorrect
__NR_compat_syscalls values will result in a build-time error.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-01-27 09:38:07 +00:00
Mark Rutland aed40e0144 arm64: move to ESR_ELx macros
Now that we have common ESR_ELx_* macros, move the core arm64 code over
to them.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
2015-01-15 12:24:15 +00:00
AKASHI Takahiro 1014c81d9a arm64: ptrace: allow tracer to skip a system call
If tracer modifies a syscall number to -1, this traced system call should
be skipped with a return value specified in x0.
This patch implements this semantics.

Please note:
* syscall entry tracing and syscall exit tracing (ftrace tracepoint and
  audit) are always executed, if enabled, even when skipping a system call
  (that is, -1).
  In this way, we can avoid a potential bug where audit_syscall_entry()
  might be called without audit_syscall_exit() at the previous system call
  being called, that would cause OOPs in audit_syscall_entry().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[will: fixed up conflict with blr rework]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-28 10:24:13 +00:00
Laura Abbott fcff588633 arm64: Treat handle_arch_irq as a function pointer
handle_arch_irq isn't actually text, it's just a function pointer.
It doesn't need to be stored in the text section and doing so
causes problesm if we ever want to make the kernel text read only.
Declare handle_arch_irq as a proper function pointer stored in
the data section.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25 15:56:44 +00:00
Will Deacon 63648dd20f arm64: entry: use ldp/stp instead of push/pop when saving/restoring regs
The push/pop instructions can be suboptimal when saving/restoring large
amounts of data to/from the stack, for example on entry/exit from the
kernel. This is because:

  (1) They act on descending addresses (i.e. the newly decremented sp),
      which may defeat some hardware prefetchers

  (2) They introduce an implicit dependency between each instruction, as
      the sp has to be updated in order to resolve the address of the
      next access.

This patch removes the push/pop instructions from our kernel entry/exit
macros in favour of ldp/stp plus offset.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-14 10:42:21 +00:00
Will Deacon d54e81f9af arm64: entry: avoid writing lr explicitly for constructing return paths
Using an explicit adr instruction to set the link register to point at
ret_fast_syscall/ret_to_user can defeat branch and return stack predictors.

Instead, use the standard calling instructions (bl, blr) and have an
unconditional branch as the following instruction.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-14 10:42:15 +00:00
Will Deacon 1059c6bf85 arm64: debug: don't re-enable debug exceptions on return from el1_dbg
When returning from a debug exception taken from EL1, we unmask debug
exceptions after handling the exception. This is crucial for debug
exceptions taken from EL0, so that any kernel work on the ret_to_user
path can be debugged by kgdb.

However, when returning back to EL1 the only thing left to do is to
restore the original register state before the exception return. If
single-step has been enabled by the debug exception handler, we will
get stuck in an infinite debug exception loop, since we will take the
step exception as soon as we unmask debug exceptions.

This patch avoids unmasking debug exceptions on the debug exception
return path when the exception was taken from EL1.

Fixes: 2a2830703a (arm64: debug: avoid accessing mdscr_el1 on fault paths where possible)
Cc: <stable@vger.kernel.org> #3.16+
Reported-by: David Long <dave.long@linaro.org>
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-09-23 15:49:34 +01:00
Catalin Marinas f3e5c847ec arm64: Add __NR_* definitions for compat syscalls
This patch adds __NR_* definitions to asm/unistd32.h, moves the
__NR_compat_* definitions to asm/unistd.h and removes all the explicit
unistd32.h includes apart from the one building the compat syscall
table. The aim is to have the compat __NR_* definitions available but
without colliding with the native syscall definitions (required by
lib/compat_audit.c to avoid duplicating the audit header files between
native and compat).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-10 11:02:40 +01:00
Larry Bassel 6c81fe7925 arm64: enable context tracking
Make calls to ct_user_enter when the kernel is exited
and ct_user_exit when the kernel is entered (in el0_da,
el0_ia, el0_svc, el0_irq and all of the "error" paths).

These macros expand to function calls which will only work
properly if el0_sync and related code has been rearranged
(in a previous patch of this series).

The calls to ct_user_exit are made after hw debugging has been
enabled (enable_dbg_and_irq).

The call to ct_user_enter is made at the beginning of the
kernel_exit macro.

This patch is based on earlier work by Kevin Hilman.
Save/restore optimizations were also done by Kevin.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Larry Bassel <larry.bassel@linaro.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-10 10:10:21 +01:00
Larry Bassel 6ab6463aeb arm64: adjust el0_sync so that a function can be called
To implement the context tracker properly on arm64,
a function call needs to be made after debugging and
interrupts are turned on, but before the lr is changed
to point to ret_to_user(). If the function call
is made after the lr is changed the function will not
return to the correct place.

For similar reasons, defer the setting of x0 so that
it doesn't need to be saved around the function call
(save far_el1 in x26 temporarily instead).

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Larry Bassel <larry.bassel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-07-10 10:10:20 +01:00
ChiaHao 3906c2b53c arm64: Bug fix in stack alignment exception
The value of ESR has been stored into x1, and should be directly pass to
do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort
will get the wrong value of ESR.

Signed-off-by: ChiaHao <andy.jhshiu@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
2014-06-18 12:40:36 +01:00
Catalin Marinas cf5c95db57 2014-05-15 for-3.16 pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQF8BAABCgBmBQJTdT+DXxSAAAAAAC4AKGlzc3Vlci1mcHJAbm90YXRpb25zLm9w
 ZW5wZ3AuZmlmdGhob3JzZW1hbi5uZXQ5Q0QyQTBEQTZBRDhGNzMzMDE3NUUyQkJD
 MjM3MjA3RTk1NzRGQTdEAAoJEMI3IH6VdPp9jL8H/3kzXh+5rZycb5r48E6Cic/a
 Gl0NmRjGtbsxLZcvd8NR3cDol1c9mEAelFrwSA3ar0W91hDf9gsEgxYSBcGKfX/b
 sxqzhFoArMDitvu8QQ38SMIlXaGokW3sevj4B93ljw9DqhFR/BvJctmVfyNuPLpp
 fFZh0JRyHnkMkXKMJKtYyiXRgfGiJ90rGHPRZLJW7zCIk0/oYd4LESpnqWC+cGKg
 w8WIe0Vu4CsiQffkWRmMMJmcJIVayJXAtMHOyBNCKMnYziZSqs+JIUwhbPCxci51
 vTxWOFs/CAeZp8mrlHR2TD3dHtzP8c/NSL7E3k4QA0tYReA8T3XHwhRmqtHCp7E=
 =sllM
 -----END PGP SIGNATURE-----

Merge tag 'for-3.16' of git://git.linaro.org/people/ard.biesheuvel/linux-arm into upstream

FPSIMD register bank context switching and crypto algorithms
optimisations for arm64 from Ard Biesheuvel.

* tag 'for-3.16' of git://git.linaro.org/people/ard.biesheuvel/linux-arm:
  arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions
  arm64: pull in <asm/simd.h> from asm-generic
  arm64/crypto: AES in CCM mode using ARMv8 Crypto Extensions
  arm64/crypto: AES using ARMv8 Crypto Extensions
  arm64/crypto: GHASH secure hash using ARMv8 Crypto Extensions
  arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions
  arm64/crypto: SHA-1 using ARMv8 Crypto Extensions
  arm64: add support for kernel mode NEON in interrupt context
  arm64: defer reloading a task's FPSIMD state to userland resume
  arm64: add abstractions for FPSIMD state manipulation
  asm-generic: allow generic unaligned access if the arch supports it

Conflicts:
	arch/arm64/include/asm/thread_info.h
2014-05-16 10:05:11 +01:00
AKASHI Takahiro 3157858fef arm64: split syscall_trace() into separate functions for enter/exit
As done in arm, this change makes it easy to confirm we invoke syscall
related hooks, including syscall tracepoint, audit and seccomp which would
be implemented later, in correct order. That is, undoing operations in the
opposite order on exit that they were done on entry.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-12 16:43:29 +01:00
AKASHI Takahiro 449f81a4da arm64: make a single hook to syscall_trace() for all syscall features
Currently syscall_trace() is called only for ptrace.
With additional TIF_xx flags defined, it is now called in all the cases
of audit, ftrace and seccomp in addition to ptrace.

Acked-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-12 16:43:28 +01:00
Will Deacon 2a2830703a arm64: debug: avoid accessing mdscr_el1 on fault paths where possible
Since mdscr_el1 is part of the debug register group, it is highly likely
to be trapped by a hypervisor to prevent virtual machines from debugging
(buggering?) each other. Unfortunately, this absolutely destroys our
performance, since we access the register on many of our low-level
fault handling paths to keep track of the various debug state machines.

This patch removes our dependency on mdscr_el1 in the case that debugging
is not being used. More specifically we:

  - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and
    avoid disabling step in the MDSCR when we don't need to.
    MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from
    userspace.

  - Ensure debug exceptions are re-enabled on *all* exception entry
    paths, even the debug exception handling path (where we re-enable
    exceptions after invoking the handler). Since we can now rely on
    MDSCR_EL1.SS being cleared by the entry code, exception handlers can
    usually enable debug immediately before enabling interrupts.

  - Remove all debug exception unmasking from ret_to_user and
    el1_preempt, since we will never get here with debug exceptions
    masked.

This results in a slight change to kernel debug behaviour, where we now
step into interrupt handlers and data aborts from EL1 when debugging the
kernel, which is actually a useful thing to do. A side-effect of this is
that it *does* potentially prevent stepping off {break,watch}points when
there is a high-frequency interrupt source (e.g. a timer), so a debugger
would need to use either breakpoints or manually disable interrupts to
get around this issue.

With this patch applied, guest performance is restored under KVM when
debug register accesses are trapped (and we get a measurable performance
increase on the host on Cortex-A57 too).

Cc: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-12 16:43:28 +01:00
Ard Biesheuvel 005f78cd88 arm64: defer reloading a task's FPSIMD state to userland resume
If a task gets scheduled out and back in again and nothing has touched
its FPSIMD state in the mean time, there is really no reason to reload
it from memory. Similarly, repeated calls to kernel_neon_begin() and
kernel_neon_end() will preserve and restore the FPSIMD state every time.

This patch defers the FPSIMD state restore to the last possible moment,
i.e., right before the task returns to userland. If a task does not return to
userland at all (for any reason), the existing FPSIMD state is preserved
and may be reused by the owning task if it gets scheduled in again on the
same CPU.

This patch adds two more functions to abstract away from straight FPSIMD
register file saves and restores:
- fpsimd_restore_current_state -> ensure current's FPSIMD state is loaded
- fpsimd_flush_task_state -> invalidate live copies of a task's FPSIMD state

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2014-05-08 11:31:57 +02:00
Neil Zhang 883c057367 arm64: fix typo in entry.S
Commit 64681787 (arm64: let the core code deal with preempt_count)
changed the code, but left the comments unchanged, fix it.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-01-13 13:55:13 +00:00
Sandeepa Prabhu ee6214cec7 arm64: support single-step and breakpoint handler hooks
AArch64 Single Steping and Breakpoint debug exceptions will be
used by multiple debug framworks like kprobes & kgdb.

This patch implements the hooks for those frameworks to register
their own handlers for handling breakpoint and single step events.

Reworked the debug exception handler in entry.S: do_dbg to route
software breakpoint (BRK64) exception to do_debug_exception()

Signed-off-by: Sandeepa Prabhu <sandeepa.prabhu@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-12-19 17:43:11 +00:00
Marc Zyngier 6468178767 arm64: let the core code deal with preempt_count
Commit f27dde8dee (sched: Add NEED_RESCHED to the preempt_count)
introduced the use of bit 31 in preempt_count for obscure scheduling
purposes.

This causes interrupts taken from EL0 to hit the (open coded) BUG when
this flag is flipped while handling the interrupt (we compare the
values before and after, and kill the kernel if they are different).

The fix is to stop messing with the preempt count entirely, as this
is already being dealt with in the generic code (irq_enter/irq_exit).

Tested on a dual A53 FPGA running cyclictest.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25 16:44:04 +00:00
Marc Zyngier 717321fcb5 arm64: fix access to preempt_count from assembly code
preempt_count is defined as an int. Oddly enough, we access it
as a 64bit value. Things become interesting when running a BE
kernel, and looking at the current CPU number, which is stored
as an int next to preempt_count. Like in a per-cpu interrupt
handler, for example...

Using a 32bit access fixes the issue for good.

Cc: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-05 09:33:57 +00:00
Will Deacon d50240a5f6 arm64: mm: permit use of tagged pointers at EL0
TCR.TBI0 can be used to cause hardware address translation to ignore the
top byte of userspace virtual addresses. Whilst not especially useful in
standard C programs, this can be used by JITs to `tag' pointers with
various pieces of metadata.

This patch enables this bit for AArch64 Linux, and adds a new file to
Documentation/arm64/ which describes some potential caveats when using
tagged virtual addresses.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-09-03 10:18:02 +01:00
Catalin Marinas 2600e130b3 arm64: Enable interrupts in the EL0 undef handler
do_undefinstr() has to be called with interrupts disabled since it may
read the instruction from the user address space which could lead to a
data abort and subsequent might_sleep() warning in do_page_fault().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-08-22 11:47:37 +01:00
Feng Kan 845ad05ec3 arm64: Change kernel stack size to 16K
Written by Catalin Marinas, tested by APM on storm platform. This is needed
because of the failures encountered when running SpecWeb benchmark test.

Signed-off-by: Feng Kan <fkan@apm.com>
Acked-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-26 13:37:29 +01:00
Mark Rutland 381cc2b970 arm64: treat unhandled compat el0 traps as undef
Currently, if a compat process reads or writes from/to a disabled
cp15/cp14 register, the trap is not handled by the el0_sync_compat
handler, and the kernel will head to bad_mode, where it will die(), and
oops(). For 64 bit processes, disabled system register accesses are
currently treated as unhandled instructions.

This patch modifies entry.S to treat these unhandled traps as undefined
instructions, sending a SIGILL to userspace. This gives processes a
chance to handle this and stop using inaccessible registers, and
prevents further issues in the kernel as a result of the die().

Reported-by: Johannes Jensen <Johannes.Jensen@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-05-31 16:04:44 +01:00
Marc Zyngier 5c1ce6f7c2 arm64: add explicit symbols to ESR_EL1 decoding
The ESR_EL1 decoding process is a bit cryptic, and KVM has also
a need for the same constants.

Add a new esr.h file containing the appropriate exception classes
constants, and change entry.S to use it. Fix a small bug in the
EL1 breakpoint check while we're at it.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-17 15:58:25 +01:00
Al Viro 207bdae452 arm64: switch to generic sigaltstack
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-14 09:17:29 -05:00
Marc Zyngier dc637f1fda arm64: move vector entry macro to assembler.h
This macro is also useful to other bits defining vectors (hypervisor
stub, KVM...).

Move it to a common location.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-05 11:26:47 +00:00
Al Viro e0fd18ce11 arm64: get rid of fork/vfork/clone wrappers
[fixes from Catalin Marinas folded]

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-22 18:14:17 -04:00
Catalin Marinas 6a872777ff arm64: Use generic sys_execve() implementation
This patch converts the arm64 port to use the generic sys_execve()
implementation removing the arm64-specific (compat_)sys_execve_wrapper()
functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-17 14:41:51 +01:00
Catalin Marinas 59dc67b0cc arm64: Use generic kernel_execve() implementation
This patch enables CONFIG_GENERIC_KERNEL_EXECVE on arm64 and removes the
arm64-specific implementation of kernel_execve().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-17 14:35:04 +01:00
Catalin Marinas c34501d21b arm64: Use generic kernel_thread() implementation
This patch enables CONFIG_GENERIC_KERNEL_THREAD on arm64, changes
copy_threads to cope with kernel threads creation and adapts
ret_from_fork accordingly. The arm64-specific kernel_thread
implementation is no longer needed.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-17 14:33:31 +01:00
Catalin Marinas f3d447a97f arm64: Do not include asm/unistd32.h in asm/unistd.h
This patch only includes asm/unistd32.h where necessary and removes its
inclusion in the asm/unistd.h file. The __SYSCALL_COMPAT guard is
dropped.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
2012-10-11 10:39:08 +01:00
Catalin Marinas 6916fd086f arm64: Enable interrupts before calling do_notify_resume()
task_work_run() implementation had the side effect of enabling
interrupts. With commit ac3d0da8 (task_work: Make task_work_add()
lockless), interrupts are no longer enabled revealing the bug in the
arch code. This patch enables the interrupt explicitly before calling
do_notify_resume().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-08 18:04:21 +01:00
Catalin Marinas 60ffc30d56 arm64: Exception handling
The patch contains the exception entry code (kernel/entry.S), pt_regs
structure and related accessors, undefined instruction trapping and
stack tracing.

AArch64 Linux kernel (including kernel threads) runs in EL1 mode using
the SP1 stack. The vectors don't have a fixed address, only alignment
(2^11) requirements.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-17 10:24:46 +01:00