Commit Graph

193 Commits

Author SHA1 Message Date
Jon Mason c529aa3033 NTB: Xeon Doorbell errata workaround
Modifications to the 14th bit of the B2BDOORBELL register will not be
mirrored to the remote system due to a hardware issue.  To get around
the issue, shrink the number of available doorbell bits by 1.  The max
number of doorbells was being used as a way to referencing the Link
Doorbell bit.  Since this would no longer work, the driver must now
explicitly reference that bit.

This does not affect the xeon_errata_workaround case, as it is not using
the b2bdoorbell register.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-11-20 09:57:30 -07:00
Bartlomiej Zolnierkiewicz 0776ae7b89 dmaengine: remove DMA unmap flags
Remove no longer needed DMA unmap flags:
- DMA_COMPL_SKIP_SRC_UNMAP
- DMA_COMPL_SKIP_DEST_UNMAP
- DMA_COMPL_SRC_UNMAP_SINGLE
- DMA_COMPL_DEST_UNMAP_SINGLE

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
Acked-by: Mark Brown <broonie@linaro.org>
[djbw: clean up straggling skip unmap flags in ntb]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:04:38 -08:00
Bartlomiej Zolnierkiewicz 6f57fd0578 NTB: convert to dmaengine_unmap_data
Use the generic unmap object to unmap dma buffers.

Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jon Mason <jon.mason@intel.com>
[djbw: fix up unmap len, and GFP flags]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14 11:01:32 -08:00
Yijing Wang 73f47cadfe ntb: clean up unnecessary MSI/MSI-X capability find
PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX).
Access to PCIe device config space again will consume more time.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:01 -07:00
Jon Mason db3bb3f07e NTB: Update Version
Update NTB version to 1.0

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:00 -07:00
Jon Mason f9a2cf890b NTB: Comment Fix
Add "data" ntb_register_db_callback parameter description comment and
correct poor spelling.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:08:00 -07:00
Jon Mason 3daa3a073e NTB: Remove unused variable
Remove unused pci_dev variable from ntb_transport_free()

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:59 -07:00
Jon Mason b1ef004303 NTB: Remove References of non-B2B BWD HW
NTB-RP is not a supported configuration on BWD hardware.  Remove the
code attempting to set it up.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:59 -07:00
Jon Mason ed6c24eda9 NTB: NTB-RP support
Add support for Non-Transparent Bridge connected to a PCI-E Root Port on
the remote system (also known as NTB-RP mode).  This allows for a NTB
enabled system to be connected to a non-NTB enabled system/slot.

Modifications to the registers and BARs/MWs on the Secondary side by the
remote system are reflected into registers on the Primary side for the
local system.  Similarly, modifications of registers and BARs/MWs on
Primary side by the local system are reflected into registers on the
Secondary side for the Remote System.  This allows communication between
the 2 sides via these registers and BARs/MWs.

Note: there is not a fix for the Xeon Errata (that was already worked
around in NTB-B2B mode) for NTB-RP mode.  Due to this limitation, NTB-RP
will not work on the Secondary side with the Xeon Errata workaround
enabled.  To get around this, disable the workaround via the
xeon_errata_workaround=0 modparm.  However, this can cause the hang
described in the errata.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:58 -07:00
Jon Mason 497938890a NTB: Rename Variables for NTB-RP
Many variable names in the NTB driver refer to the primary or secondary
side.  However, these variables will be used to access the reverse case
when in NTB-RP mode.  Make these names more generic in anticipation of
NTB-RP support.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-05 11:07:58 -07:00
Jon Mason 282a2feeb9 NTB: Use DMA Engine to Transmit and Receive
Allocate and use a DMA engine channel to transmit and receive data over
NTB.  If none is allocated, fall back to using the CPU to transfer data.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
2013-09-05 11:04:09 -07:00
Jon Mason ac477afb04 NTB: Enable 32bit Support
Correct the issues on NTB that prevented it from working on x86_32 and
modify the Kconfig to allow it to be permitted to be used in that
environment as well.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:53 -07:00
Jon Mason be4dac0fca NTB: Update Device IDs
Add support for new Intel NTB devices on upcoming Xeon hardware.  Since
the Xeon hardware design is already in place in the driver, all that is
needed are the new device ids.

Remove the device IDs for NTB devs running in Transparent Bridge mode,
as this driver is not being used for those devices.

Rename the device IDs for NTB devs running in NTB-RP mode to better
identify their usage model.  "PS" to denote the Primary Side of NTB, and
"SS" to denote the secondary side.  The primary side is the interface
exposed to the local system, and the secondary side is the interface
exposed to the remote system.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:53 -07:00
Jon Mason 113bf1c9f1 NTB: BWD Link Recovery
The BWD NTB device will drop the link if an error is encountered on the
point-to-point PCI bridge.  The link will stay down until all errors are
cleared and the link is re-established.  On link down, check to see if
the error is detected, if so do the necessary housekeeping to try and
recover from the error and reestablish the link.

There is a potential race between the 2 NTB devices recovering at the
same time.  If the times are synchronized, the link will not recover and the
driver will be stuck in this loop forever.  Add a random interval to the
recovery time to prevent this race.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 14:48:52 -07:00
Jon Mason 948d3a65b6 NTB: Xeon Errata Workaround
There is a Xeon hardware errata related to writes to SDOORBELL or
B2BDOORBELL in conjunction with inbound access to NTB MMIO Space, which
may hang the system.  To workaround this issue, use one of the memory
windows to access the interrupt and scratch pad registers on the remote
system.  This bypasses the issue, but removes one of the memory windows
from use by the transport.  This reduction of MWs necessitates adding
some logic to determine the number of available MWs.

Since some NTB usage methodologies may have unidirectional traffic, the
ability to disable the workaround via modparm has been added.

See BF113 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-c5500-c3500-spec-update.pdf
See BT119 in
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-family-spec-update.pdf

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 13:51:51 -07:00
Jon Mason 1517a3f21a NTB: Correct debugfs to work with more than 1 NTB Device
Debugfs was setup in NTB to only have a single debugfs directory.  This
resulted in the leaking of debugfs directories and files when multiple
NTB devices were present, due to each device stomping on the variables
containing the previous device's values (thus preventing them from being
freed on cleanup).  Correct this by creating a secondary directory of
the PCI BDF for each device present, and nesting the previously existing
information in those directories.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:14:54 -07:00
Jon Mason b6750cfe07 NTB: Correct USD/DSD Identification
Due to ambiguous documentation, the USD/DSD identification is backward
when compared to the setting in BIOS.  Correct the bits to match the
BIOS setting.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:14 -07:00
Jon Mason 8703451151 NTB: Correct Number of Scratch Pad Registers
The NTB Xeon hardware has 16 scratch pad registers and 16 back-to-back
scratch pad registers.  Correct the #define to represent this and update
the variable names to reflect their usage.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:13 -07:00
Jon Mason 3b12a0d15b NTB: Add Error Handling in ntb_device_setup
If an error is encountered in ntb_device_setup, it is possible that the
spci_cmd isn't populated.  Writes to the offset can result in a NULL
pointer dereference.  This issue is easily encountered by running in
NTB-RP mode, as it currently is not supported and will generate an
error.  To get around this issue, return if an error is encountered
prior to attempting to write to the spci_cmd offset.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-09-03 11:13:12 -07:00
Jon Mason 8b19d450ad
NTB: Multiple NTB client fix
Fix issue with adding multiple ntb client devices to the ntb virtual
bus.  Previously, multiple devices would be added with the same name,
resulting in crashes.  To get around this issue, add a unique number to
the device when it is added.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:22 -07:00
Jon Mason c336acd333
NTB: memcpy lockup workaround
The system will appear to lockup for long periods of time due to the NTB
driver spending too much time in memcpy.  Avoid this by reducing the
number of packets that can be serviced on a given interrupt.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:58:06 -07:00
Jon Mason c9d534c8cb
NTB: Correctly handle receive buffers of the minimal size
The ring logic of the NTB receive buffer/transmit memory window requires
there to be at least 2 payload sized allotments.  For the minimal size
case, split the buffer into two and set the transport_mtu to the
appropriate size.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:59 -07:00
Jon Mason 90f9e93464
NTB: reset tx_index on link toggle
If the NTB link toggles, the driver could stop receiving due to the
tx_index not being set to 0 on the transmitting size on a link-up event.
This is due to the driver expecting the incoming data to start at the
beginning of the receive buffer and not at a random place.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:51 -07:00
Jon Mason b77b2637b3
NTB: Link toggle memory leak
Each link-up will allocate a new NTB receive buffer when the NTB
properties are negotiated with the remote system.  These allocations did
not check for existing buffers and thus did not free them.  Now, the
driver will check for an existing buffer and free it if not of the
correct size, before trying to alloc a new one.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:45 -07:00
Jon Mason 113fc505b8
NTB: Handle 64bit BAR sizes
64bit BAR sizes are permissible with an NTB device.  To support them
various modifications and clean-ups were required, most significantly
using 2 32bit scratch pad registers for each BAR.

Also, modify the driver to allow more than 2 Memory Windows.

Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:40 -07:00
Dan Carpenter cc0f868d8a
NTB: fix pointer math issues
->remote_rx_info and ->rx_info are struct ntb_rx_info pointers.  If we
add sizeof(struct ntb_rx_info) then it goes too far.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:29 -07:00
Dan Carpenter ad3e2751e7
ntb: off by one sanity checks
These tests are off by one.  If "mw" is equal to NTB_NUM_MW then we
would go beyond the end of the ndev->mw[] array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:24 -07:00
Jon Mason 186f27ff9f
NTB: variable dereferenced before check
Correct instances of variable dereferencing before checking its value on
the functions exported to the client drivers.  Also, add sanity checks
for all exported functions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jon.mason@intel.com>
2013-05-15 10:57:17 -07:00
Jon Mason 74465645cd NTB: Fix Sparse Warnings
Address the sparse warnings and resulting fallout

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:34:21 -08:00
Jon Mason 719234f944 NTB: disable x86_32 support
Atomic readq and writeq do not exist by default on some 32bit
architectures, thus causing compile errors due to non-existent symbols.
Since NTB has not been tested 32bit, disable x86_32 support until such
time as this and any other issues can be properly discovered.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:34:21 -08:00
Jon Mason 50228c5505 NTB: Update Version
Update NTB version to 0.25

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:48:13 -08:00
Jon Mason 448c6fb3a3 NTB: Out of free receive entries issue
If the NTB client driver enqueues the maximum number of rx buffers, it
will not be able to re-enqueue another in its callback handler due to a
lack of free entries.  This can be avoided by adding the current entry
to the free queue prior to calling the client callback handler.  With
this change, ntb_netdev will no longer encounter a rx error on its first
packet.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:52 -08:00
Jon Mason 793c20e9c9 NTB: Remove reads across NTB
CPU reads across NTB are slow(er) and can hang the local system if an
ECC error is encountered on the remote.  To work around the need for a
read, have the remote side write its current position in the rx buffer
to the local system's buffer and use that to see if there is room when
transmitting.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason d7237e22bb NTB: correct stack usage warning in debugfs_read
Correct gcc warning of using too much stack debugfs_read.  This is done
by kmallocing the buffer instead of using the char array on stack.
Also, shrinking the buffer to something closer to what is currently
being used.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason f766755c30 NTB: whitespace cleanups
Whitespace cleanups found via `indent`

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason 170d35a57c NTB: namespacecheck cleanups
Declare ntb_bus_type static to remove it from name space, and remove
unused ntb_get_max_spads function.  Found via `make namespacecheck`.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason d66d7ac2e0 NTB: use simple_open for debugfs
Use simple_open for debugfs instead of recreating it in the NTB driver.
Caught by coccicheck.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason 7b4f2d3c3b NTB: No sleeping in interrupt context
Move all cancel_delayed_work_sync to a work thread to prevent sleeping
in interrupt context (when the NTB link goes down).  Caught via
'Sleep inside atomic section checking'

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:51 -08:00
Jon Mason ef114ed506 NTB: separate transmit and receive windows
Since it is possible for the memory windows on the two NTB connected
systems to be different sizes, the divergent sizes must be accounted for
in the segmentation of the MW's on each side.  Create separate size
variables and initialization as necessary.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Jon Mason 842c1ddea5 NTB: correct memory barrier
mmiowb is not sufficient to flush the data and is causing data
corruption.  Change to wmb and the data corruption is no more.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Jon Mason 8222b402e2 NTB: Handle ntb client device probes without present hardware
Attempts to probe client ntb drivers without ntb hardware present will
result in null pointer dereference due to the lack of the ntb bus device
being registers.  Check to see if this is the case, and fail all calls
by the clients registering their drivers.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-20 15:45:50 -08:00
Greg Kroah-Hartman 78a61ab79a ntb: remove __dev* markings
These are now gone from the kernel, so remove them from the newly-added
drivers before they start to cause build errors for people.

Cc: Jon Mason <jon.mason@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:17:42 -08:00
Jon Mason fce8a7bb5b PCI-Express Non-Transparent Bridge Support
A PCI-Express non-transparent bridge (NTB) is a point-to-point PCIe bus
connecting 2 systems, providing electrical isolation between the two subsystems.
A non-transparent bridge is functionally similar to a transparent bridge except
that both sides of the bridge have their own independent address domains.  The
host on one side of the bridge will not have the visibility of the complete
memory or I/O space on the other side of the bridge.  To communicate across the
non-transparent bridge, each NTB endpoint has one (or more) apertures exposed to
the local system.  Writes to these apertures are mirrored to memory on the
remote system.  Communications can also occur through the use of doorbell
registers that initiate interrupts to the alternate domain, and scratch-pad
registers accessible from both sides.

The NTB device driver is needed to configure these memory windows, doorbell, and
scratch-pad registers as well as use them in such a way as they can be turned
into a viable communication channel to the remote system.  ntb_hw.[ch]
determines the usage model (NTB to NTB or NTB to Root Port) and abstracts away
the underlying hardware to provide access and a common interface to the doorbell
registers, scratch pads, and memory windows.  These hardware interfaces are
exported so that other, non-mainlined kernel drivers can access these.
ntb_transport.[ch] also uses the exported interfaces in ntb_hw.[ch] to setup a
communication channel(s) and provide a reliable way of transferring data from
one side to the other, which it then exports so that "client" drivers can access
them.  These client drivers are used to provide a standard kernel interface
(i.e., Ethernet device) to NTB, such that Linux can transfer data from one
system to the other in a standard way.

Signed-off-by: Jon Mason <jon.mason@intel.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:11:14 -08:00