fw ucode is corrupted after vf flr by PSP so ucode_init() is
a must in psp_hw_init othewise KIQ/KCQ enabling will fail
Revert "drm/amdgpu: refine code delete duplicated error handling"
This reverts commit e57b87ff828f95efe992468e6d18c2c059b27aa9.
Revert "drm/amdgpu: move amdgpu_ucode_init_bo to amdgpu_device.c"
This reverts commit 815b8f8595148d06a64d2ce4282e8e80dfcb02f1.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SR-IOV need to exchange some data between PF&VF through shared VRAM
PF will copy some necessary firmware and information to the shared
VRAM. It also requires some information from VF. PF will send a
key through mailbox2 to help guest calculate checksum so that it can
verify whether the data is correct.
So check the data on the specified offset of the shared VRAM, if the
checksum is right, read values from it and write some VF information
next to the data from PF.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in function amdgpu_ucode_init_bo, when failed, it will
set load_type to AMDGPU_FW_LOAD_DIRECT.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Programming CP_HQD_QUEUE_PRIORITY enables a queue to take priority over
other queues on the same pipe. Multiple queues on a pipe are timesliced
so this gives us full precedence over other queues.
Programming CP_HQD_PIPE_PRIORITY changes the SPI_ARB_PRIORITY of the
wave as follows:
0x2: CS_H
0x1: CS_M
0x0: CS_L
The SPI block will then dispatch work according to the policy set by
SPI_ARB_PRIORITY. In the current policy CS_H is higher priority than
gfx.
In order to prevent getting stuck in loops of resources bouncing between
GFX and high priority compute and introducing further latency, we
statically reserve a portion of the pipe.
v2: fix srbm_select to ring->queue and use ring->funcs->type
v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_*
v4: switch int to enum amd_sched_priority
v5: corresponding changes for srbm_lock
v6: change CU reservation to PIPE_PERCENT allocation
v7: use kiq instead of MMIO
v8: back to MMIO, and make the implementation sleep safe.
v9: corresponding changes for splitting HIGH into _HW/_SW
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SR-IOV need to reserve a piece of shared VRAM at the exact place
to exchange data betweem PF and VF. The start address and size of
the shared mem are passed to guest through VBIOS structure
VRAM_UsageByFirmware.
VRAM_UsageByFirmware is a general feature in VBIOS, it indicates
that VBIOS need to reserve a piece of memory on the VRAM.
Because the mem address is specified. Reserve it early in
amdgpu_ttm_init to make sure that it can monoplize the space.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error handling for virtual functions assumed a single
vf per VM and didn't properly account for bare metal. Make
the error arrays per device and add locking.
Reviewed-by: Gavin Wan <gavin.wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bo_free on csa is too late to put in amdgpu_fini because that
time ttm is already finished,
Move it earlier to avoid the page fault.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
currently in_reset is only used in sriov gpu reset, and it
will be used for other non-gfx hw component later, like
PSP, so move it from gfx to adev and rename to in_sriov_reset
make more sense.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
put amd_pm_funcs table in struct powerplay for all
asics.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we can safely call it on SI as well.
v2: fix type in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sysfs is more stable, and doesn't require root to access
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 2 debugfs files, one that contains the VBIOS version, and one that
contains the VBIOS itself. These won't change after initialization,
so we can add the VBIOS version when we parse the atombios information.
This ensures that we can find out the VBIOS version, even when the dmesg
buffer fills up, and makes it easier to associate which VBIOS version is
for which GPU on mGPU configurations. Set the size to 20 characters in
case of some weird VBIOS version that exceeds the expected 17 character
format (3-8-3\0). The VBIOS dump also allows for easy debugging
v2: Move to debugfs, clarify commit message, add VBIOS dump file
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the shadow flag on the shadow and not the parent, always bind shadow BOs
during allocation instead of manually, use the reservation_object wrappers
to grab the lock.
This fixes a couple of issues with binding the shadow BOs as well as correctly
evicting them when memory becomes tight.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need a larger gart for asics that do not support GPUVM on all
engines (e.g., MM) to make sure we have enough space for all
gtt buffers in physical mode. Change the default size based on
the asic type.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow overrides on the command line.
v2: agd: sqaush in spelling fix and bogus default value warning
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
May waste a bit of memory, but simplifies the interface
significantly.
v2: convert internal accounting to use 256bit slots
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a lower case b to be consistent with the other wb functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us even more loc.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us quite a bunch of loc.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add uvd and vce re-init after gpu reset.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Stop reprogramming the MC, the vbios already does this in asic_init
- Reduce internal gart to 256M (this does not affect the ttm GTT pool size)
- Initial support for huge pages
- Rework bo migration logic
- Lots of improvements for vega10
- Powerplay fixes
- Additional Raven enablement
- SR-IOV improvements
- Bug fixes
- Code cleanup
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (138 commits)
drm/amdgpu: fix header on gfx9 clear state
drm/amdgpu: reduce the time of reading VBIOS
drm/amdgpu/virtual_dce: Remove the rmmod error message
drm/amdgpu/gmc9: disable legacy vga features in gmc init
drm/amdgpu/gmc8: disable legacy vga features in gmc init
drm/amdgpu/gmc7: disable legacy vga features in gmc init
drm/amdgpu/gmc6: disable legacy vga features in gmc init (v2)
drm/radeon: Set depth on low mem to 16 bpp instead of 8 bpp
drm/amdgpu: fix the incorrect scratch reg number on gfx v6
drm/amdgpu: fix the incorrect scratch reg number on gfx v7
drm/amdgpu: fix the incorrect scratch reg number on gfx v8
drm/amdgpu: fix the incorrect scratch reg number on gfx v9
drm/amd/powerplay: add support for 3DP 4K@120Hz on vega10.
drm/amdgpu: enable huge page handling in the VM v5
drm/amdgpu: increase fragmentation size for Vega10 v2
drm/amdgpu: ttm_bind only when user needs gpu_addr in bo pin
drm/amdgpu: correct clock info for SRIOV
drm/amdgpu/gmc8: SRIOV need to program fb location
drm/amdgpu: disable firmware loading for psp v10
drm/amdgpu:fix gfx fence allocate size
...
1, for sriov, we need 8dw for the gfx fence due to CP
behaviour
2, cleanup wrong logic in wptr/rptr wb alloc and free
Change-Id: Ifbfed17a4621dae57244942ffac7de1743de0294
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than the legacy atombios version.
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the default GART size and save a lot of VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows setting the gtt size independent of the gart size.
v2: fix copy and paste typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename symbols from gtt_ to gart_ as appropriate.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the CONGIG_MEMSIZE register as that may
not be reliable on some APUs.
v2: The scratch register is only used on CIK+
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain MC registers need a delay after writing them to properly
update in the init sequence.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we use a pointer to the scratch reg start offset,
most of the functions were duplicated.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This feature works for SRIOV enviroment. For non-SRIOV enviroment, the
trans_error function does nothing.
The error information includes error_code (16bit), error_flags(16bit)
and error_data(64bit). Since there are not many errors, we keep the
errors in an array and transfer all errors to Host before amdgpu
initialization function (amdgpu_device_init) exit.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are no longer needed now that we use the fb_location
programmed by the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=2S5N
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
Remove unnecessary save/restore of pdev->d3_delay.
The only assignments to pdev->d3_delay are in radeon_switcheroo_set_state()
and some quirks, none of which should be relevant in the
amdgpu_switcheroo_set_state() path.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
The debugfs interface has calls a function that was evidently
defined under the wrong name in some configurations:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:64:12: error: 'amdgpu_debugfs_test_ib_ring_init' used but never defined [-Werror]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3803:12: error: 'amdgpu_debugfs_test_ib_init' defined but not used [-Werror=unused-function]
This fixes the function name.
Fixes: 4f0955fcc0 ("drm/amdgpu: export test ib debugfs interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids printing spurious messages like this:
[ 3.102059] amdgpu 0000:01:00.0: VM size (-1) must be a power of 2
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_info firmware is released after data is used. But when system enters into
suspend, upper class driver will cache all firmware names. At that time,
gpu_info will be failing to load. It seems an upper class issue, that we should
not release gpu_info firmware until device finished.
[ 903.236589] cache_firmware: amdgpu/vega10_sdma1.bin
[ 903.236590] fw_set_page_data: fw-amdgpu/vega10_sdma1.bin buf=ffff88041eee10c0 data=ffffc90002561000 size=17408
[ 903.236591] cache_firmware: amdgpu/vega10_sdma1.bin ret=0
[ 903.464160] __allocate_fw_buf: fw-amdgpu/vega10_gpu_info.bin buf=ffff88041eee2c00
[ 903.471815] (NULL device *): loading /lib/firmware/updates/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.482870] (NULL device *): loading /lib/firmware/updates/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.492716] (NULL device *): loading /lib/firmware/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.503156] (NULL device *): direct-loading amdgpu/vega10_gpu_info.bin
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As Christian and David's suggestion, submit the test ib ring debug interfaces.
It's useful for debugging with the command submission without VM case.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User is able to follow the ip block number to write the ip_block_mask for
selecting the one which user would like to enable.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu