Rename meta format files, using "metafmt" prefix instead of "pixfmt-meta".
These are metadata formats, not pixel formats.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Bingbu Cao <bingbu.cao@intel.com>
Cc: Dafna Hirschfeld <dafna@fastmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the pad flag specifying the pad type instead of a boolean in
preparation for internal source pads.
Also make the loop variable unsigned.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the endpoint fwnode to find out the remote pad, instead of using the
first source pad found. Also improve error messages.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
fwnode_graph_parse_endpoint() fwnode argument is now const, therefore make
media_entity_get_fwnode_pad() fwnode argument const as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document how rotation and orientation should be taken into account in
writing camera sensor drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The "& IMX296_TMDOUT_MASK" means that "tmdout" can't be negative so the
error checking will not work.
Fixes: cb33db2b6c ("media: i2c: IMX296 camera sensor driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add mediatek hevc decoder linux driver which use the stateless API in
MT8195.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add () around 'flag' in macro]
Some drivers firmwares parse by themselves slice header and need
num_delta_pocs_of_ref_rps_idx value to parse slice header
short_term_ref_pic_set().
Use one of the 4 reserved bytes to store this value without
changing the v4l2_ctrl_hevc_decode_params structure size and padding.
This value also exist in DXVA API.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix typo in num_delta_pocs_of_ref_rps_idx doc]
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When compile-testing on mips/RB532 with W=1:
arch/mips/include/asm/mach-rc32434/rb.h:13: note: this is the location of the previous definition
13 | #define RST (1 << 15)
|
drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_parse.c:15: warning: "RST" redefined
15 | #define RST 0xd0
|
drivers/media/platform/renesas/rcar_jpu.c:77: warning: "RST" redefined
77 | #define RST 0xd0
|
"RST" is indeed a name too short to be conflict-free.
Fix this by creating a common <media/jpeg.h> header file, containing
definitions for all JPEG markers used, prefixed by "JPEG_MARKER_", based
on the existing private definitions in the Samsung S5P JPEG driver, and
convert all affected drivers.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304152346.hJOPxPRh-lkp@intel.com/
Link: https://lore.kernel.org/oe-kbuild-all/202304150059.bHUyuriy-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> (s5p-jpeg)
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The v4l2_m2m_buf_copy_metadata function correctly copies the metadata of
the buffer. Use that function instead of open-coding the metadata copy.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The previous commit ebad8e731c ("media: usb: siano: Fix use after
free bugs caused by do_submit_urb") adds cancel_work_sync() in
smsusb_stop_streaming(). But smsusb_stop_streaming() may be called,
even if the work_struct surb->wq has not been initialized. As a result,
the warning will occur. One of the processes that could lead to warning
is shown below:
smsusb_probe()
smsusb_init_device()
if (!dev->in_ep || !dev->out_ep || align < 0) {
smsusb_term_device(intf);
smsusb_stop_streaming()
cancel_work_sync(&dev->surbs[i].wq);
__cancel_work_timer()
__flush_work()
if (WARN_ON(!work->func)) // work->func is null
The log reported by syzbot is shown below:
WARNING: CPU: 0 PID: 897 at kernel/workqueue.c:3066 __flush_work+0x798/0xa80 kernel/workqueue.c:3063
Modules linked in:
CPU: 0 PID: 897 Comm: kworker/0:2 Not tainted 6.2.0-rc1-syzkaller #0
RIP: 0010:__flush_work+0x798/0xa80 kernel/workqueue.c:3066
...
RSP: 0018:ffffc9000464ebf8 EFLAGS: 00010246
RAX: 1ffff11002dbb420 RBX: 0000000000000021 RCX: 1ffffffff204fa4e
RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff888016dda0e8
RBP: ffffc9000464ed98 R08: 0000000000000001 R09: ffffffff90253b2f
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888016dda0e8
R13: ffff888016dda0e8 R14: ffff888016dda100 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd4331efe8 CR3: 000000000b48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__cancel_work_timer+0x315/0x460 kernel/workqueue.c:3160
smsusb_stop_streaming drivers/media/usb/siano/smsusb.c:182 [inline]
smsusb_term_device+0xda/0x2d0 drivers/media/usb/siano/smsusb.c:344
smsusb_init_device+0x400/0x9ce drivers/media/usb/siano/smsusb.c:419
smsusb_probe+0xbbd/0xc55 drivers/media/usb/siano/smsusb.c:567
...
This patch adds check before cancel_work_sync(). If surb->wq has not
been initialized, the cancel_work_sync() will not be executed.
Reported-by: syzbot+27b0b464864741b18b99@syzkaller.appspotmail.com
Fixes: ebad8e731c ("media: usb: siano: Fix use after free bugs caused by do_submit_urb")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Lots of data and functions here are not needed when CONFIG_OF is not
set, so move them inside #ifdef CONFIG_OF blocks to prevent the warnings.
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1645:29: warning: ‘mtk_jpeg_clocks’ defined but not used [-Wunused-variable]
1645 | static struct clk_bulk_data mtk_jpeg_clocks[] = {
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1640:29: warning: ‘mt8173_jpeg_dec_clocks’ defined but not used [-Wunused-variable]
1640 | static struct clk_bulk_data mt8173_jpeg_dec_clocks[] = {
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1481:20: warning: ‘mtk_jpeg_dec_irq’ defined but not used [-Wunused-function]
1481 | static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1461:20: warning: ‘mtk_jpeg_enc_irq’ defined but not used [-Wunused-function]
1461 | static irqreturn_t mtk_jpeg_enc_irq(int irq, void *priv)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1180:13: warning: ‘mtk_jpegdec_worker’ defined but not used [-Wunused-function]
1180 | static void mtk_jpegdec_worker(struct work_struct *work)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:986:13: warning: ‘mtk_jpegenc_worker’ defined but not used [-Wunused-function]
986 | static void mtk_jpegenc_worker(struct work_struct *work)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:79:28: warning: ‘mtk_jpeg_dec_formats’ defined but not used [-Wunused-variable]
79 | static struct mtk_jpeg_fmt mtk_jpeg_dec_formats[] = {
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:31:28: warning: ‘mtk_jpeg_enc_formats’ defined but not used [-Wunused-variable]
31 | static struct mtk_jpeg_fmt mtk_jpeg_enc_formats[] = {
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1222:20: warning: ‘mtk_jpeg_enc_done’ defined but not used [-Wunused-function]
1222 | static irqreturn_t mtk_jpeg_enc_done(struct mtk_jpeg_dev *jpeg)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1072:12: warning: ‘mtk_jpegdec_set_hw_param’ defined but not used [-Wunused-function]
1072 | static int mtk_jpegdec_set_hw_param(struct mtk_jpeg_ctx *ctx,
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1060:12: warning: ‘mtk_jpegdec_put_hw’ defined but not used [-Wunused-function]
1060 | static int mtk_jpegdec_put_hw(struct mtk_jpeg_dev *jpeg, int hw_id)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1038:12: warning: ‘mtk_jpegdec_get_hw’ defined but not used [-Wunused-function]
1038 | static int mtk_jpegdec_get_hw(struct mtk_jpeg_ctx *ctx)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:977:12: warning: ‘mtk_jpegenc_put_hw’ defined but not used [-Wunused-function]
977 | static int mtk_jpegenc_put_hw(struct mtk_jpeg_dev *jpeg, int hw_id)
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:963:12: warning: ‘mtk_jpegenc_set_hw_param’ defined but not used [-Wunused-function]
963 | static int mtk_jpegenc_set_hw_param(struct mtk_jpeg_ctx *ctx,
../drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:941:12: warning: ‘mtk_jpegenc_get_hw’ defined but not used [-Wunused-function]
941 | static int mtk_jpegenc_get_hw(struct mtk_jpeg_ctx *ctx)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-media/202305042146.j4ZxuvpM-lkp@intel.com/
Cc: Bin Liu <bin.liu@mediatek.com>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: linux-media@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
From the experiments with camera sensors using SGRBG10_1X10/3280x2464 and
SRGGB10_1X10/3280x2464 formats, it becomes clear that on sdm845 and sm8250
VFE outputs the lines padded to a length multiple of 16 bytes. As in the
current driver the value of the bpl_alignment is set to 8 bytes, the frames
captured in formats with the bytes-per-line value being not a multiple of
16 get corrupted.
Set the bpl_alignment of the camss video output device to 16 for sdm845 and
sm8250 to fix that.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VIDIOC_ENUMINPUT documentation describes the tuner field of
struct v4l2_input as index:
Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
"
* - __u32
- ``tuner``
- Capture devices can have zero or more tuners (RF demodulators).
When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
RF connector and this field identifies the tuner. It corresponds
to struct :c:type:`v4l2_tuner` field ``index``. For
details on tuners see :ref:`tuner`.
"
Drivers I could find also use the 'tuner' field as an index, e.g.:
drivers/media/pci/bt8xx/bttv-driver.c bttv_enum_input()
drivers/media/usb/go7007/go7007-v4l2.c vidioc_enum_input()
However, the UAPI comment claims this field is 'enum v4l2_tuner_type':
include/uapi/linux/videodev2.h
This field being 'enum v4l2_tuner_type' is unlikely as it seems to be
never used that way in drivers, and documentation confirms it. It seem
this comment got in accidentally in the commit which this patch fixes.
Fix the UAPI comment to stop confusion.
This was pointed out by Dmitry while reviewing VIDIOC_ENUMINPUT
support for strace.
Fixes: 6016af82ea ("[media] v4l2: use __u32 rather than enums in ioctl() structs")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
No need cast (void*) to (struct dvb_demux_feed *) or (struct av7110 *).
Signed-off-by: Atin Bainada <hi@atinb.me>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
No need cast (void*) to (struct dst_state *),
(struct cx18_stream *), (struct saa7164_port *)
or (struct budget *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
No need cast (void*) to (struct stdemux *),(struct hva_h264_ctx *)
or (struct hva_h264_task *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
No need cast (void*) to (struct dvb_usb_device *) or
(struct filter_info *).
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: drop the obsolete dvb-usb/az6027.c and dvb-usb/pctv452e.c changes]
Commit dfb9f94e8e ("[media] stk1160: Build as a module if SND is m and
audio support is selected") had to introduce some complex config dependency
handling to compile for all combinations of configs VIDEO_STK1160 and
VIDEO_STK1160_AC97.
Later, commit e36e6b5f26 ("[media] stk1160: Remove stk1160-mixer and
setup internal AC97 codec automatically") removes the config
VIDEO_STK1160_AC97, which renders the previous dependency handling
unnecessary. The commit already simplified the dependency of the remaining
config VIDEO_STK1160, but it misses the opportunity to merge VIDEO_STK1160
and VIDEO_STK1160_COMMON.
So, do that now and simplify the build config definition of the STK1160 USB
video capture support.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The last buffer from before the change must be marked
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
initiate a drain of the capture queue in dynamic resolution change
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This prints all register values.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The pointer types of p_s32 and p_s64 in v4l2_ext_control has been
updated, match the change in documentation.
Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use the intended pointer types for p_s32 and p_64 in the union of the
struct v4l2_ext_control.
Fixes: e77eb66342 ("videodev2.h: add p_s32 and p_s64 pointers")
Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
I'd like to be looped in on changes to venus so that I can help ensure no
obvious regressions creep in. I'm happy to run some simple tests for venus
on the hardware I have access to
- db410c
- db820
- rb3
- rb5
and one of rb1 / rb2 in the future when they are delivered.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Commit in Fixes turned a BUG() into a "normal" memory allocation failure.
While at it, it introduced a memory leak.
So fix it.
Also update the comment on top of the function to reflect what has been
change by the commit in Fixes.
Fixes: 40e986c996 ("media: common: saa7146: replace BUG_ON by WARN_ON")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This reverts commit cd61f3c679. That
commit's purpose was to prevent the padding from being decoded when
userspace didn't set a selection, relying on the default one.
However, as described in the Step 6 of the Initialization procedure for
the Memory-to-Memory Stateful Video Encoder Interface [1]:
"Set the visible resolution for the stream metadata via
VIDIOC_S_SELECTION() on the OUTPUT queue if it is desired to be
different than the full OUTPUT resolution."
And from the Note:
"To avoid encoding the padding, the client needs to explicitly configure
this selection target"
Hence the behavior in the original commit doesn't follow the interface
and needs to be reverted.
This fixes the following v4l2-compliance failure observed on
mt8192-asurada-spherion:
fail: v4l2-test-formats.cpp(924): sel.r.width != fmt.g_width()
test VIDIOC_S_FMT: FAIL
[1] https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/dev-encoder.html#initialization
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Signed-off-by: Pina Chen <pina.chen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For format V4L2_PIX_FMT_VC1_ANNEX_G,
the separate codec data is required only once.
The repeated codec data may introduce some decoding error.
so drop the repeated codec data.
It's amphion vpu's limitation
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the codec data is replaced with startcode,
and then driver drop it, otherwise it may led to decoding error.
It's amphion vpu's limitation
Driver has dropped the first codec data,
but need to drop the repeated codec data too.
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Conform to kernel coding style by wrapping macro in parenthesis. Issue
found by checkpatch.
Signed-off-by: Angel Alberto Carretero <angelalbertoc.r@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rework allocation errors cases handling to simply it
by removing useless tests.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reported-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If az6007_read() returns error, there is no sence to continue.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3af2f4f15a ("[media] az6007: Change the az6007 read/write routine parameter")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The iterator for_each_child_of_node() increments the refcount of the
child node it is processing. Release such a reference when the loop
needs to break due to an error during its execution.
Issue identified using for_each_child.cocci Coccinelle semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix the below error reported by checkpatch:
ERROR: Macros with complex values should be enclosed in parentheses
CSIDPHYSKW0_UTIL_DL1_SKW_ADJ(1) | \
CSIDPHYSKW0_UTIL_DL2_SKW_ADJ(1) | \
CSIDPHYSKW0_UTIL_DL3_SKW_ADJ(1)
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The VI peripheral of Tegra supports capturing from MIPI CSI-2 or parallel
video (called VIP in the docs).
The staging tegra-video driver currently implements MIPI CSI-2 video
capture for Tegra210. Add support for parallel video capture (VIP) on
Tegra20. With the generalizations added to the VI driver in previous
commits, this is only a matter of adding the vip.c and tegra20.c
implementations and registering them.
Unfortunately there was no documentation available for the VI or VIP
peripherals of Tegra20 (or any other Tegra chips). This implementation has
been based entirely on the code from a vendor kernel based on Linux 3.1 and
massively adapted to fit into the tegra-video driver. Parts of this code is
definitely non-optimal to say the least (especially tegra20_vi_enable() and
the single-frame capture logic), but it was impossible to improve it.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix host1x_client_unregister usage: it's now a void func]
Tegra20 can do horizontal and vertical image flip, but Tegra210 cannot
(either the hardware, or this driver).
In preparation to adding Tegra20 support, add a flag in struct tegra_vi_soc
so the generic vi.c code knows whether the flip controls should be added or
not.
Also provide a generic implementation that simply sets two flags in the
channel struct. The Tegra20 implementation will enable flipping at stream
start based on those flags.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tegra20 supports planar YUV422 capture, which can be implemented by writing
U and V base address registers in addition to the "main" base buffer
address register.
It also supports H and V flip, which among others requires to write the
start address (i.e. the 1st offset to write, at the end of the buffer or
line) in more registers for Y and, for planar formats, U and V.
Add minimal hooks in VI to allow per-SoC optional support to those
features:
- variables in struct tegra_vi for the U and V buffer base offsets
- variables in struct tegra_vi for the Y, U and V buffer start offsets
- an optional per-soc VI operation to compute those values on queue setup
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In preparation to implement Tegra20 parallel video capture, add a variable
to hold the required syncpt and document all the syncpt variables.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
tegra_channel_host1x_syncpt_init() gets the host1x syncpts needed for the
Tegra210 implementation, and tegra_channel_host1x_syncpts_free() puts
them.
Tegra20 needs to get and put a different syncpt. In preparation for adding
Tegra20 support, move these functions to new ops in the soc-specific
`struct tegra_vi_ops` .
No functional changes.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Tegra20 VI needs an additional operation to enable the VI, add an
operation for that.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The CSI module does not handle all the MIPI lane calibration procedure,
leaving a small part of it to the VI module. In doing this,
tegra_channel_enable_stream() (vi.c) manipulates the private data of the
upstream subdev casting it to struct 'tegra_csi_channel', which will be
wrong after introducing a VIP (parallel video input) channel.
This prevents adding support for the VIP module. It also breaks the
logical isolation between modules.
Since the lane calibration requirement does not exist in the parallel input
module, moving the calibration function to a per-module op is not
optimal. Instead move the calibration procedure in the CSI module, together
with the rest of the calibration procedures. After this change,
tegra_channel_enable_stream() just calls v4l2_subdev_call() to ask for a
stream start/stop to the CSI module, which in turn knows all the
CSI-specific details to implement it.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The tegra_default_format in vi.c is specific to Tegra210 CSI.
In preparation for adding Tegra20 VIP support, move the default format to a
new field in the soc-specific `struct tegra_vi_soc`. Instead of an entire
format struct, only store a pointer to an item in the existing format
array.
No functional changes. The format pointed to is the same that used to be in
vi.c.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
tegra_channel_fmt_align() takes care of the size constraints, alignment and
rounding requirements of the Tegra210 VI peripheral. Tegra20 has different
constraints.
In preparation for adding Tegra20 support, move this function to a new op
in the soc-specific `struct tegra_vi_ops` .
Also move to tegra210.c the T210-specific defines used in the moved code.
No functional changes.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
We are about to add support for the Tegra20 parallel video capture, which
has no TPG. In preparation for that, limit the VIDEO_TEGRA_TPG option to
Tegra210 which is the only implementation currently provided by this
driver.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is only a pointer reference to struct tegra_vi in video.h, thus vi.h
is not needed.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sakari Ailus