spk_priv_keyinfo.h should be opened from the speakup directory. When
building as extmod we should thus open it from the module directory
rather than the main Linux source.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221118012206.j6hq6b6nfx2jhqg6@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.
Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put().
Fixes: 87db7579eb ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset")
Suggested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121154339.4088935-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release().
Fixes: 75ca758adb ("ocxl: Create a clear delineation between ocxl backend & frontend")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145929.2429271-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch includes an enhancement requested frequently on the mailing
list.[1][2] It adds a variable, cur_phonetic in the spk_vars, which can
be set as a module parameter, as well as in /sys/speakup/cur_phonetic.
This patch also documents cur_phonetic as a sysfs attribute in
sysfs-driver-speakup.
When cur_phonetic=1, it causes speakup to speak letters phonetically if
paused on the character while arrowing through a word.
When a user does not set cur_phonetic to any value, the default value
for it would be 0.
[1]: https://github.com/linux-speakup/speakup/issues/6
[2]: https://github.com/linux-speakup/speakup/issues/5
since V1:
- removed unnecessary lines
Signed-off-by: Mushahid Hussain<mushi.shar@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221115100530.91174-3-mushi.shar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows setting default variables for
speakup module at the boot rather than setting the sys variables after
the boot.
Signed-off-by: Mushahid Hussain <mushi.shar@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221115100530.91174-2-mushi.shar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_acntsa module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-16-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_acntpc module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-15-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding a default variables to the speakup_txprt module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Link: https://lore.kernel.org/r/20221109215108.7933-14-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_spkout module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-13-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_ltlk module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-12-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_keypc module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-11-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_dummy module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-10-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_dtlk module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-9-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding a default variables to the speakup_dectlk module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-8-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_decpc module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-7-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding a default variables to the speakup_decext module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-6-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_bns module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-5-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding a default variables to the speakup_audptr module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-4-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_apollo module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-3-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_soft module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-2-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Qualcomm SoC SLIMBus Non Generic Device (NGD) controller
bindings to DT Schema.
During conversion add iommus already present in DTS and extend the
example based on SDM845.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reinitialize the reconf completion flag when ngd registers are
not retainied or when enumeration is lost for ngd.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If transfer in qcom_slim_ngd_xfer_msg_sync() fails, we need to drop the
PM runtime usage counter to have it balanced.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slimbus core interrupt is getting fired after suspend. At this point
ADSP slimbus hardware is off with gated clocks which is leading to an
unclocked access when HLOS slimbus tried to read the interrupt
status register in the ISR.
Co-developed-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a schema for the ONIE tlv NVMEM layout that can be found on any ONIE
compatible networking device.
Describe all the possible NVMEM cells that can be produced by this
layout parser.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described on their website (see link below),
"The Open Network Install Environment (ONIE) is an open source
initiative that defines an open “install environment” for modern
networking hardware."
It is not a proper corporation per-se but rather more a group which
tries to spread the use of open source standards in the networking
hardware world.
Link: https://opencomputeproject.github.io/onie/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EEPROMs can be nvmem providers. Let's make all EEPROM bindings
reference nvmem.yaml as they should, so that nvmem cells and layout
parsers can be safely described within the EEPROM nodes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nvmem devices description works like this:
* Most cases (EEPROM & co):
eeprom@x {
compatible = "<eeprom-compatible>";
...
};
* MTD case:
flash@y {
compatible = "<flash-compatible>";
...
otp {
compatible = "user-otp"; /* or "factory-otp" */
...
};
};
In the former case, the nvmem device is "eeprom@x", while in the latter
case the nvmem device is "otp".
Nvmem devices can produce nvmem cells. The current way to describe nvmem
cells is to locate them by providing their static byte and bit offset
and length. These information are stored in subnodes of the nvmem
device.
It is now a fact that such description does not fit more advanced use
cases where the location or the size of the cells may vary. There are
currently three known situations which require being described
differently: Kontron's SL28 VPD, ONIE's TLV table and U-Boot's
environment variables.
Hence, we need a way to describe the parsers that must be used in order
to make the dynamic discovery of the nvmem cells. This new description
must fit both use cases (the generic situation and the MTD case).
Let's create in both cases a container node named nvmem-layout whose
content will depend on the parser. Right now nvmem-layout.yaml is
"empty", but references to additional layout parser bindings will be
inserted in the near future. The final goal being something that looks
like:
* Most cases (EEPROM & co):
eeprom@x {
compatible = "<eeprom-compatible>";
...
nvmem-layout {
compatible = "<parser-compatible>";
...
};
};
* MTD case:
flash@y {
compatible = "<flash-compatible>";
...
otp {
compatible = "user-otp"; /* or "factory-otp" */
...
nvmem-layout {
compatible = "<parser-compatible>";
...
};
};
};
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. They
decided to store U-Boot environment data inside U-Boot partition and to
use a custom header (with "uEnv" magic and env data length).
Add support for Broadcom's specific binding and their custom format.
Ref: 6b0584c19d ("dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a Kconfig description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Despite not being listed nor required within the top level nvmem yaml
file, the "compatible" property is mandatory and is actually enforced by
all the nvmem provider bindings.
Unfortunately, the lack of compatible in the nvmem.yaml to level
description file lead to the example not matching anything and thus not
being checked at all.
Let's pick a compatible almost randomly (one which is already used with
the qfprom label) to make the example at least valid on a semantic
point of view and getting it checked.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inform NVMEM framework of type attribute for stm32-romem as NVMEM_TYPE_OTP
so userspace is able to know how the data is stored in BSEC.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the upper OTPs are ECC protected, they support only one 32 bits word
programming.
For a second modification of this word, these ECC become invalid and
this OTP will be no more accessible, the shadowed value is invalid.
This patch adds a warning to indicate an upper OTP update, because this
operation is dangerous as OTP is not locked by the driver after the first
update to avoid a second update.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support STM32MP15_BSEC_NUM_LOWER in stm32 romem config to prepare
the next SoC in STM32MP family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118063932.6418-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a virtio console port is initialized, it is registered as an hvc
console using a virtual console number. If a KVM guest is started with
multiple virtio console devices, the same vtermno (or virtual console
number) can be used to allocate different hvc consoles, which leads to
various communication problems later on.
This is also reported in debugfs :
# grep vtermno /sys/kernel/debug/virtio-ports/*
/sys/kernel/debug/virtio-ports/vport1p1:console_vtermno: 1
/sys/kernel/debug/virtio-ports/vport2p1:console_vtermno: 1
/sys/kernel/debug/virtio-ports/vport3p1:console_vtermno: 2
/sys/kernel/debug/virtio-ports/vport4p1:console_vtermno: 3
Replace the next_vtermno global with an ID allocator and start the
allocation at 1 as it is today. Also recycle IDs when a console port
is removed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20221122134643.376184-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment in scripts/kallsyms.c describing the usage of
scripts/kallsyms does not reflect the latest implementation.
Fix the comment to be equivalent to what the usage() function prints.
Signed-off-by: Yuma Ueda <cyan@0x00a1e9.dev>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20221118133631.4554-1-cyan@0x00a1e9.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@unit_mutex protects @unit from being freed, so obviously it should be
released after @unit is used, and not before.
This is a follow-up to commit 282a4b7181 ("char: xillybus: Prevent
use-after-free due to race condition") which ensures, among others, the
protection of @private_data after @unit_mutex has been released.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20221117071825.3942-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move PXP mode state machine to SETUP mode only if
memory ready message sent successfully to the firmware.
Leave it in INIT mode otherwise to allow try to send message later.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20221116124735.2493847-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault