Commit Graph

15 Commits

Author SHA1 Message Date
Eric Dumazet 44c81433e8 per_cpu: fix DEFINE_PER_CPU_SHARED_ALIGNED for modules
Current module loader lookups ".data.percpu" ELF section to perform
per_cpu relocation.  But DEFINE_PER_CPU_SHARED_ALIGNED() uses another
section (".data.percpu.shared_aligned"), currently only handled in
vmlinux.lds, not by module loader.

To correct this problem, instead of adding logic into module loader, or
using at build time a module.lds file for all arches to group
".data.percpu.shared_aligned" into ".data.percpu", just use ".data.percpu"
for modules.

Alignment requirements are correctly handled by ld and module loader.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14 19:11:14 -07:00
Robert P. J. Day aab3c3b01d Remove superfluous include of string.h from percpu.h
There's nothing in percpu.h that requires an explicit inclusion of
string.h.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:04 -07:00
Eric Dumazet b324215190 PERCPU : __percpu_alloc_mask() can dynamically size percpu_data storage
Instead of allocating a fix sized array of NR_CPUS pointers for percpu_data,
we can use nr_cpu_ids, which is generally < NR_CPUS.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:04 -08:00
travis@sgi.com 05991bef10 ia64: use generic percpu
ia64 has a special processor specific mapping that can be used to locate the
offset for the current per cpu area.

Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 23:27:58 +01:00
travis@sgi.com 5280e004fc percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.h
- Special consideration for IA64: Add the ability to specify
  arch specific per cpu flags

- remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case.

The arch definitions are all the same. So move them into linux/percpu.h.

We cannot move DECLARE_PER_CPU since some include files just include
asm/percpu.h to avoid include recursion problems.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:32:52 +01:00
Robert P. J. Day 0a3021f4e2 Remove unnecessary includes of spinlock.h under include/linux
Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Jeremy Fitzhardinge b00742d399 [PATCH] x86-64: Account for module percpu space separately from kernel percpu
Rather than using a single constant PERCPU_ENOUGH_ROOM, compute it as
the sum of kernel_percpu + PERCPU_MODULE_RESERVE.  This is now common
to all architectures; if an architecture wants to set
PERCPU_ENOUGH_ROOM to something special, then it may do so (ia64 is
the only one which does).

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
2007-05-02 19:27:11 +02:00
Jan Blunck a666ecfbf5 [PATCH] Fix typo in "syntax error if percpu macros are incorrectly used" patch
Trivial typo fix in the "syntax error if percpu macros are incorrectly
used" patch.  I misspelled "identifier" in all places.  D'Oh!

Thanks to Dirk Mueller to point this out.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
Al Viro 0891a8d706 [PATCH] __percpu_alloc_mask() has to be __always_inline in UP case
...  or we'll end up with cpu_online_map being evaluated on UP.  In
modules.  cpumask.h is very careful to avoid that, and for a very good
reason.  So should we...

PS: yes, it really triggers (on alpha).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:02 -07:00
Martin Peschke 7ff6f08295 [PATCH] CPU hotplug compatible alloc_percpu()
This patch splits alloc_percpu() up into two phases.  Likewise for
free_percpu().  This allows clients to limit initial allocations to online
cpu's, and to populate or depopulate per-cpu data at run time as needed:

  struct my_struct *obj;

  /* initial allocation for online cpu's */
  obj = percpu_alloc(sizeof(struct my_struct), GFP_KERNEL);

  ...

  /* populate per-cpu data for cpu coming online */
  ptr = percpu_populate(obj, sizeof(struct my_struct), GFP_KERNEL, cpu);

  ...

  /* access per-cpu object */
  ptr = percpu_ptr(obj, smp_processor_id());

  ...

  /* depopulate per-cpu data for cpu going offline */
  percpu_depopulate(obj, cpu);

  ...

  /* final removal */
  percpu_free(obj);

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:47 -07:00
Jan Blunck 632bbfeee4 [PATCH] trigger a syntax error if percpu macros are incorrectly used
get_cpu_var()/per_cpu()/__get_cpu_var() arguments must be simple
identifiers.  Otherwise the arch dependent implementations might break.

This patch enforces the correct usage of the macros by producing a syntax
error if the variable is not a simple identifier.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:44 -07:00
Eric Dumazet f867bac654 [PATCH] remove unused blkp field in percpu_data
I found that blkp field was not used in kernel tree.

As most of the times NR_CPUS is a power of two and kmalloc() memory blocks
too, this extra field basically doubles the memory space allocated in
__alloc_percpu() to store the 'struct percpu_data'

(for example, if NR_CPUS=8 on i386, kmalloc(4*8+4) returns a 64 bytes block
instead of a 32 bytes block after this patch)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:59 -08:00
Pekka Enberg f9f7500521 [PATCH] slab: remove unused align parameter from alloc_percpu
__alloc_percpu and alloc_percpu both take an 'align' argument which is
completely ignored.  snmp6_mib_init() in net/ipv6/af_inet6.c attempts to use
it, but it will be ignored.  Therefore, remove the 'align' argument and fixup
the lone caller.

Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:39 -08:00
Paul Mundt 66341a905e [PATCH] Shut up per_cpu_ptr() on UP
Currently per_cpu_ptr() doesn't really do anything with 'cpu' in the UP
case.  This is problematic in the cases where this is the only place the
variable is referenced:

  CC      kernel/workqueue.o
  kernel/workqueue.c: In function `current_is_keventd':
  kernel/workqueue.c:460: warning: unused variable `cpu'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:15 -08:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00