- Extend Wa_1607297627 to Alderlake-P (José Roberto de Souza)
- Keep PCI autosuspend control 'on' by default on all dGPU (Anshuman Gupta)
- Reset frl trained flag before restarting FRL training (Ankit Nautiyal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1o+teE2Z11pT1MN@tursulin-desk
In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15.x
This file was split in commit 5d945cbcd4
("drm/amd/display: Create a file dedicated to planes") and the logic in
dm_plane_format_mod_supported() function got changed by a switch logic.
That change broke drm_plane modifiers setting on series 5000 APUs
(tested on OXP mini AMD 5800U and HP Dev One 5850U PRO)
leading to Gamescope not working as reported on GitHub[1]
To reproduce the issue, enter a TTY and run:
$ gamescope -- vkcube
With said commit applied it will abort. This one restores the old logic,
fixing the issue that affects Gamescope.
[1](https://github.com/Plagman/gamescope/issues/624)
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IMU is a new firmware for GFX11.
There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.
Add IMU as an option for those four methods.
V2: Added debugfs
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pipe_ctx[i] exists even if the pipe is not
in use. If the pipe is not in use it will
always have a null stream, so don't return
false in this case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:
for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
mdelay(1);
}
The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:
BUG: soft lockup - CPU#4 stuck for 26s!
...
[ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu]
[ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu]
[ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu]
[ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu]
This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:
[..]
2) | dcn10_lock_all_pipes [amdgpu]() {
2) 0.120 us | optc1_is_tg_enabled [amdgpu]();
2) | dcn20_pipe_control_lock [amdgpu]() {
2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.551 us | }
2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.511 us | }
2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
[..]
We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allow gfxoff on gc_11_0_3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table.
Fixes: 264fb4d332 ("drm/amdgpu: Add multi-GPU DMA mapping helpers")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers.
Since they are non-existing registers, read access will cause a
'Completer Abort' and gets reported when AER is enabled with the below patch.
Tagging with the patch so that this is backported along with it.
v2: squash in uninitialized warning fix (Nathan Chancellor)
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
For cases where DP has HDMI2.1 sink and FRL Link issues are detected,
reset the flag to state FRL trained status before restarting FRL
training.
Fixes: 9488a030ac ("drm/i915: Add support for enabling link status and recovery")
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com
(cherry picked from commit 47e1a59e60)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
DGFX platforms has lmem and cpu can access the lmem objects
via mmap and i915 internal i915_gem_object_pin_map() for
i915 own usages. Both of these methods has pre-requisite
requirement to keep GFX PCI endpoint in D0 for a supported
iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1)
Both DG1/DG2 have a known hardware bug that violates the PCIe specs
and support the iomem read write transaction over PCIe bus despite
endpoint is D3 state.
Due to above H/W bug, we had never observed any issue with i915 runtime
PM versus lmem access.
But this issue becomes visible when PCIe gfx endpoint's upstream
bridge enters to D3, at this point any lmem read/write access will be
returned as unsupported request. But again this issue is not observed
on every platform because it has been observed on few host machines
DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver.
which really disables the PCIe power savings and leaves the bridge
at D0 state.
We need a unique interface to read/write from lmem with runtime PM
wakeref protection something similar to intel_uncore_{read, write},
keep autosuspend control to 'on' on all discrete platforms,
until we have a unique interface to read/write from lmem.
This just change the default autosuspend setting of i915 on dGPU,
user can still change it to 'auto'.
v2:
- Modified the commit message and subject with more information.
- Changed the Fixes tag to LMEM support commit. [Joonas]
- Changed !HAS_LMEM() Cond to !IS_DGFX(). [Rodrigo]
Fixes: b908be543e ("drm/i915: support creating LMEM objects")
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014113258.1284226-1-anshuman.gupta@intel.com
(cherry picked from commit 66eb93e71a)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Workaround 1607297627 was missed for Alderlake-P, so here extending it
to it and adding the fixes tag so this WA is backported to all
stable kernels.
v2:
- fixed subject
- added Fixes tag
BSpec: 54369
Cc: <stable@vger.kernel.org> # v5.17+
Fixes: dfb924e339 ("drm/i915/adlp: Remove require_force_probe protection")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017132432.112850-1-jose.souza@intel.com
(cherry picked from commit 847eec69f0)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[why]
MES response time in sriov may be longer than default value
due to reset or init in other VF. A timeout value specific
to sriov is needed.
[how]
When in sriov, adjust the timeout value to calculated
worst case scenario.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
0, original pstate X
1, ctx_A_create -> ctx_A->stable_pstate = X
2, ctx_A_set_pstate (Y) -> current pstate is Y (PEAK or STANDARD)
3, ctx_B_create -> ctx_B->stable_pstate = Y
4, ctx_A_destroy -> restore pstate to X
5, ctx_B_destroy -> restore pstate to Y
Above sequence will cause final pstate is wrong (Y), should be original X.
[HOW]
When ctx_B create,
if ctx_A touched pstate setting
(not auto, stable_pstate_ctx != NULL),
set ctx_B->stable_pstate the same value as ctx_A saved,
if stable_pstate_ctx == NULL,
fetch current pstate to fill
ctx_B->stable_pstate.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
post-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY1IgYgAKCRDdBJ7gKXxA
jpyRAQDkfa1LDkfbA4dQBZShkUhBX1k3AyRO1NWMjwwTxP3H8wD9HUz1BB3ynoKc
ipzQs7q5jbBvndczEksHiG2AC7SvQAI=
=wD9I
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morron:
"Seventeen hotfixes, mainly for MM.
Five are cc:stable and the remainder address post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-10-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nouveau: fix migrate_to_ram() for faulting page
mm/huge_memory: do not clobber swp_entry_t during THP split
hugetlb: fix memory leak associated with vma_lock structure
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
mm: /proc/pid/smaps_rollup: fix maple tree search
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
mm/mmap: fix MAP_FIXED address return on VMA merge
mm/mmap.c: __vma_adjust(): suppress uninitialized var warning
mm/mmap: undo ->mmap() when mas_preallocate() fails
init: Kconfig: fix spelling mistake "satify" -> "satisfy"
ocfs2: clear dinode links count in case of error
ocfs2: fix BUG when iput after ocfs2_mknod fails
gcov: support GCC 12.1 and newer compilers
zsmalloc: zs_destroy_pool: add size_class NULL check
mm/mempolicy: fix mbind_range() arguments to vma_merge()
mailmap: update email for Qais Yousef
mailmap: update Dan Carpenter's email address
Back in commit 826cff3f7e ("drm/bridge: parade-ps8640: Enable
runtime power management") we removed a mysterious 50 ms delay because
"Parade's support [couldn't] explain what the delay [was] for".
While I'm always a fan of removing mysterious delays, I suspect that
we need this mysterious delay to avoid some problems.
Specifically, what I found recently is that on sc7180-trogdor-homestar
sometimes the AUX backlight wasn't initializing properly. Some
debugging showed that the drm_dp_dpcd_read() function that the AUX
backlight driver was calling was returning bogus data about 1% of the
time when I booted up. This confused
drm_panel_dp_aux_backlight(). From continued debugging:
- If I retried the read then the read worked just fine.
- If I added a loop to perform the same read that
drm_panel_dp_aux_backlight() was doing 30 times at bootup I could
see that some percentage of the time the first read would give bogus
data but all 29 additional reads would always be fine.
- If I added a large delay _after_ powering on the panel but before
powering on PS8640 I could still reproduce the problem.
- If I added a delay after PS8640 powered on then I couldn't reproduce
the problem.
- I couldn't reproduce the problem on a board with the same panel but
the ti-sn65dsi86 bridge chip.
To me, the above indicated that there was a problem with PS8640 and
not the panel.
I don't really have any insight into what's going on in the MCU, but
my best guess is that when the MCU itself sees the HPD go high that it
does some AUX transfers itself and this is confusing things.
Let's go back and add back in the mysterious 50 ms delay. We only want
to do this the first time we see HPD go high after booting the MCU,
not every time we double-check HPD.
With this, the backlight initializes reliably on homestar.
Fixes: 826cff3f7e ("drm/bridge: parade-ps8640: Enable runtime power management")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017121813.1.I59700c745fbc31559a5d5c8e2a960279c751dbd5@changeid
Commit 16ce101db8 ("mm/memory.c: fix race when faulting a device private
page") changed the migrate_to_ram() callback to take a reference on the
device page to ensure it can't be freed while handling the fault.
Unfortunately the corresponding update to Nouveau to accommodate this
change was inadvertently dropped from that patch causing GPU to CPU
migration to fail so add it here.
Link: https://lkml.kernel.org/r/20221019122934.866205-1-apopple@nvidia.com
Fixes: 16ce101db8 ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix a buffer overflow in format_helper_test.
- Set DDC pointer in drmm_connector_init.
- Compiler fixes for panfrost.
-----BEGIN PGP SIGNATURE-----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=rzib
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2022-10-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc2:
- Fix a buffer overflow in format_helper_test.
- Set DDC pointer in drmm_connector_init.
- Compiler fixes for panfrost.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c4d05683-8ebe-93b8-d24c-d1d2c68f12c4@linux.intel.com
Commit 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error. This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.
This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.
Fixes: e3163bc8ff ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
__le32 and __le64 types aren't portable and are not available on
FreeBSD (which uses the same uAPI).
Instead of attempting to always output little endian, just use native
endianness in the dumps. Tools can detect the endianness in use by
looking at the 'magic' field, but equally we don't expect big-endian to
be used with Mali (there are no known implementations out there).
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252
Fixes: 730c2bf4ad ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-3-steven.price@arm.com
Commit 35a3b82f1b ("drm/connector: Introduce drmm_connector_init")
introduced the function drmm_connector_init() with a parameter for an
optional ddc pointer to the i2c controller used to access the DDC bus.
However, the underlying call to __drm_connector_init() was always
setting it to NULL instead of passing the ddc argument around.
This resulted in unexpected null pointer dereference on platforms
expecting to get a DDC controller.
Fixes: 35a3b82f1b ("drm/connector: Introduce drmm_connector_init")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221019143442.1798964-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The xrgb2101010 format conversion test (unlike for other formats) does
an endianness conversion on the results. However, it always converts
TEST_BUF_SIZE 32-bit integers, which results in reading from (and
writing to) more memory than in present in the result buffer. Instead,
use the buffer size, divided by sizeof(u32).
The issue could be reproduced with KASAN:
./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \
--kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \
--kconfig_add CONFIG_KASAN_KUNIT_TEST=y \
drm_format_helper_test.*xrgb2101010
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com
A user reported a bug on CAPE VERDE system where uvd_v3_1
IP component failed to initialize as there is an issue with
BO move code from one memory to other.
In function amdgpu_mem_visible() called by amdgpu_bo_move(),
when there are no blocks to compare or if we have a single
block then break the loop.
Fixes: 312b4dc11d ("drm/amdgpu: Fix VRAM BO swap issue")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If mes is not dequeued during fini, mes will be in an uncleaned state
during reload, then mes couldn't receive some commands which leads to
reload failure.
[How]
Perform MES dequeue via MMIO after all the unmap jobs are done by mes
and before kiq fini.
v2: Move the dequeue operation inside kiq_hw_fini.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
L1 blocks most of GC registers accessing by MMIO.
[How]
Use RLCG interface to program GC registers under SRIOV VF in full access time.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with
an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp():
[ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794)
Clang's kernel Control Flow Integrity (kCFI) makes sure that all
indirect call targets have a type that exactly matches the function
pointer prototype. In this case, hqd_destroy()'s third parameter,
reset_type, should have a type of 'uint32_t' but every implementation of
this callback has a third parameter type of 'enum kfd_preempt_type'.
Update the function pointer prototype to match reality so that there is
no more CFI violation.
Link: https://github.com/ClangBuiltLinux/linux/issues/1738
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Building 32-bit images may fail with the following error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:
In function ‘dml32_UseMinimumDCFCLK’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1:
error: the frame size of 1096 bytes is larger than 1024 bytes
This is seen when building i386:allmodconfig with any of the following
compilers.
gcc (Debian 12.2.0-3) 12.2.0
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0
The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY
because in that case CONFIG_FRAME_WARN is already set to 2048 even for
32-bit builds.
dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e4
("drm/amd/display: DML changes for DCN32/321"). It declares a large
number of local variables. Increase the frame size for the affected
file to 2048, similar to other files in the same directory, to enable
32-bit build tests with affected compilers.
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Łukasz Bartosik <ukaszb@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pmfw has changed the driver interface version, so keep same with the
fw.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the SMU driver interface version to V7.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't
be initialized. There will be a NULL pointer call trace after
removing the dpm check condition in amdgpu_pm_sysfs_fini.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu]
Call Trace:
<TASK>
amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu]
amdgpu_device_fini_hw+0xdf/0x290 [amdgpu]
[How]
List pm_attr_list should be initialized when dpm is disabled.
Fixes: a6ad27cec5 ("drm/amd/pm: Remove redundant check condition")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested by PMFW team and same as what did for gfxoff feature.
This can address some Mode1Reset failures observed on SMU13.0.0.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie