Pull timer updates from Thomas Gleixner:
"The timer and timekeeping departement delivers:
Core:
- The consolidation of the VDSO code into a generic library including
the conversion of x86 and ARM64. Conversion of ARM and MIPS are en
route through the relevant maintainer trees and should end up in
5.4.
This gets rid of the unnecessary different copies of the same code
and brings all architectures on the same level of VDSO
functionality.
- Make the NTP user space interface more robust by restricting the
TAI offset to prevent undefined behaviour. Includes a selftest.
- Validate user input in the compat settimeofday() syscall to catch
invalid values which would be turned into valid values by a
multiplication overflow
- Consolidate the time accessors
- Small fixes, improvements and cleanups all over the place
Drivers:
- Support for the NXP system counter, TI davinci timer
- Move the Microsoft HyperV clocksource/events code into the
drivers/clocksource directory so it can be shared between x86 and
ARM64.
- Overhaul of the Tegra driver
- Delay timer support for IXP4xx
- Small fixes, improvements and cleanups as usual"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
time: Validate user input in compat_settimeofday()
timer: Document TIMER_PINNED
clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic
clocksource/drivers: Make Hyper-V clocksource ISA agnostic
MAINTAINERS: Fix Andy's surname and the directory entries of VDSO
hrtimer: Use a bullet for the returns bullet list
arm64: vdso: Fix compilation with clang older than 8
arm64: compat: Fix __arch_get_hw_counter() implementation
arm64: Fix __arch_get_hw_counter() implementation
lib/vdso: Make delta calculation work correctly
MAINTAINERS: Add entry for the generic VDSO library
arm64: compat: No need for pre-ARMv7 barriers on an ARMv8 system
arm64: vdso: Remove unnecessary asm-offsets.c definitions
vdso: Remove superfluous #ifdef __KERNEL__ in vdso/datapage.h
clocksource/drivers/davinci: Add support for clocksource
clocksource/drivers/davinci: Add support for clockevents
clocksource/drivers/tegra: Set up maximum-ticks limit properly
clocksource/drivers/tegra: Cycles can't be 0
clocksource/drivers/tegra: Restore base address before cleanup
clocksource/drivers/tegra: Add verbose definition for 1MHz constant
...
For layer_split no need user to enable/disable it, but compute it in
komeda internally, komeda will enable it if the scaling exceed the
acceptable range of scaler.
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708065923.4887-1-james.qian.wang@arm.com
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- Instead of expecting userspace to compute this (and duplicating
modeset code), the kernel driver should compute when it's necessary
to enable layer_split mode to make a configuration possible. I.e. in
komeda_plane_atomic_check() first try komeda_build_layer_data_flow()
and if that fails, try komeda_build_layer_split_data_flow(), and set
dflow.en_split accordingly. Assuming I understand somewhat correctly
what this does.
- If this is needed for validation then you want a debugfs file to
force this one way or the other, or alternatively use
->atomic_print_state to dump such hidden driver-private state.
Depends upon how you do your validation ofc.
Fixes: a407a65093 ("drm/komeda: Add layer split support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-4-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- Instead of expecting userspace to compute this (and duplicating
modeset code), the kernel driver should compute when it's possible
to enable this better up/downscale mode (assuming I understood
Liviu correctly on what this does) automatically.
- If this is needed for validation then you want a debugfs file to
force this one way or the other, or alternatively use
->atomic_print_state to dump such hidden driver-private state.
Depends upon how you do your validation ofc.
Fixes: 42b6f118f6 ("drm/komeda: Add image enhancement support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-3-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
Again this probably needs multiple pieces to solve this properly:
- To make plane configuration less surprising to userspace you
propably need to virtualize planes, and reorder which logical plane
you map to which physical one dynamically. Instead of exposing a
komeda-specific limitation to userspace and expecting them to dtrt.
I think msm and rcar-du do that already (and others), if you need
people to chat with or example code.
- If this is needed for validation, again ->atomic_print_state and the
infrastructure around that is your friend.
Fixes: 3b9dfa4ef2 ("drm/komeda: Add slave pipeline support")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-2-daniel.vetter@ffwll.ch
Properties are uapi like anything else, with all the usual rules
regarding review, testcases, open source userspace ... Furthermore
driver-private kms properties are highly discouraged, over the past
few years we've realized we need to make a serious effort at better
standardizing this stuff.
From the discussion with Liviu the solution for these here needs
multiple pieces:
- For being able to reliably read the memory clock we need a DT
property, plus maybe DT override snippets to fix it if it's wrong.
- For exposing plane limitations to userspace there's TEST_ONLY. There
is a bit a gap in telling userspace better that scaling doesn't work
due to limits (atm a good strategy is to retry again without scaling
when adding a plane didn't work the first time around). But that
needs a more generic solution, not exposing something extremely
komeda specific.
- If this is needed by validation tools, you can still expose it in
debugfs. We have an entire nice infrastructure for debug printing of
kms objects already, see the various atomic_print_state callbacks
and infrastructure around them.
Fixes: 1f7f9ab790 ("drm/komeda: Add engine clock requirement check for the downscaling")
Cc: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Cc: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190705121006.26085-1-daniel.vetter@ffwll.ch
add mode1 (by psp) reset for navi asic.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perform a ras_suspend to disable ras on all IPs to workaround
some ROCm stability issue.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add baco reset support for smu11.
it can help gpu do asic reset when gpu recovery.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observed some SMU commands take more time for execution,
so increase waiting time for response.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver currently contains a repeated 500ms blocking delay call
which causes frequent major buffer underruns in PulseAudio. This patch
fixes this issue by replacing the blocking delay with a non-blocking
sleep call.
Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This series fixes stale vblank timestamps in the first event sent after
a crtc was disabled. The core now is notified via drm_crtc_vblank_off
before sending the last pending event in atomic_disable. If the crtc is
reenabled right away during to a modeset, the event is not sent at all,
as the next vblank will take care of it.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXR3UqxcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwFogAQCE6HPaBbBOHJBT5hU4ysJG1Qge
GuS/OKB2ZUDyrf3a1wEAy1qa+49x68a2coFksD571VDf+Pm85mRk+NrKl1oFFQo=
=Bs9J
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2019-07-04' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix stale vblank timestamp after a modeset
This series fixes stale vblank timestamps in the first event sent after
a crtc was disabled. The core now is notified via drm_crtc_vblank_off
before sending the last pending event in atomic_disable. If the crtc is
reenabled right away during to a modeset, the event is not sent at all,
as the next vblank will take care of it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1562237119.6641.16.camel@pengutronix.de
The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.
Fixes: 5f2f911578 ("drm/imx: atomic phase 3 step 1: Use atomic configuration")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.
This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec
This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time
Fixes: a474478642 ("drm/imx: fix crtc vblank state regression")
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
- Fixes to the tfp410 bridge.
- Small build fix for vga_switcheroo to prevent building against modular fbcon.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl0UvjcACgkQ/lWMcqZw
E8MczA//exWHc7KpgZS89+7aKj+j/XDKOXIsThFwotT/U6gG4ew/+5lmXvBRdkzA
9OY8iaEA1zCsNU/sDXPZ5byIjrHLx3G5Zp9zwsmW5tbs6/1ul4Kpnc/RU1ASKNVy
fW20FjuZRRBbJEcrYXTccNa1OmU3gjJ+k2VQrBdeOHNTBDflKs8/HpAmYY/8kzRC
TZMC59s6fsurVBIku7ic+huDelKcQtwXTYtk6pHImGmUS0egv36IX4iL4Vy+RXtF
EwodKG2K8HvggX1ix08cdYq6CEpCDIjJ7jDiYw8L4Xo6lHf/uB+E9L4o4mMRR13+
7vFi6gpfNDtbdnBMnoloKQWI7+BJRRoA/d9b/42pSiDDinrY6JTzzP3xOaRoBCk7
t7mPc9hUSR47mLf8tavVvXQDTzCvwHQeMpDXbDYqitsyE1NF6lZf/I4h6JT+nW2V
3hqcgRgF6y+66HDOpgZLuYxRJsyOwSx/57K0/jy8law3z+cQi03IEGw/cIhnIBI0
K8cOdmEEXwIPsX5vCN+vF8De6VxFMCHNqRr/u5SRa2fsuXvHQw7ewc4h9mtNXzHa
LVLIJ0Bqnma529lvmG2ZdECS+y6Dh9Kn9rWe4mO3KiWvx2rFD9NF9ffIoc5Itppm
OEC7K9ypNUMG+majgcJU8icycSpY9X0ntFwkYekO7l6CkeDFBBg=
=XYv3
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-06-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.3:
- Fixes to the tfp410 bridge.
- Small build fix for vga_switcheroo to prevent building against modular fbcon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20a62234-bc27-00eb-e0e2-22b55eec1cb2@linux.intel.com
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+Fy+
-----END PGP SIGNATURE-----
Merge tag 'for-airlie-armada' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
which isn't required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190702091313.GA23442@rmk-PC.armlinux.org.uk
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
-----BEGIN PGP SIGNATURE-----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=fG8X
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Drop the use of drmP.h header file
drmP.h header file has been deprecated so this patch drops the use of
this header, and instead includes appropriate header files required.
- Add COMPILE_TEST flag
This patch adds COMPILE_TEST dependency to exynos drm driver to
increase build test coverage. And also, it includes vmalloc.h
header file to fix one build warning which is introduced when
building the Linux kernel using sh.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAAQKjZMdBdD8oEa0cNv78FjrpOqu20ozTTvuPEm_XnVo2gRhCQ@mail.gmail.com
This works around difficult-to-reproduce soft hangs on oversubscribed
runlists.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New flag to disable an idle runlist optimization that is causing soft
hangs with some diffult-to-reproduce customer workloads. This will
serve as a workaround until the problem can be reproduced and the
root-cause determined.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Restore the code that resets mem->invalid. Othewise so mapping
userptrs after they got an MMU notifiers would always be skipped.
This also avoids unnecessarily calling get_user_pages on BOs that
have not been invalidated since the last try.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't want eviction fences to trigger when waiting for page table
updates to complete during restore. In theory there shouldn't be any
unsignaled eviction fences in the PD reservation object, but I'm
seeing them in instrumented code for reasons not fully understood.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oversubscription of queues or processes results in poor performance
mostly because HWS blinbly schedules busy and idle queues, resulting
in poor occupancy if many queues are idle.
Let users know with a warning message when transitioning from a
non-oversubscribed to an oversubscribed runlist.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just for cleanup.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All asics newer than vega10 use client ids, so simplify the
check.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christoph Hellwig says:
====================
Below is a series that cleans up the dev_pagemap interface so that it is
more easily usable, which removes the need to wrap it in hmm and thus
allowing to kill a lot of code
Changes since v3:
- pull in "mm/swap: Fix release_pages() when releasing devmap pages" and
rebase the other patches on top of that
- fold the hmm_devmem_add_resource into the DEVICE_PUBLIC memory removal
patch
- remove _vm_normal_page as it isn't needed without DEVICE_PUBLIC memory
- pick up various ACKs
Changes since v2:
- fix nvdimm kunit build
- add a new memory type for device dax
- fix a few issues in intermediate patches that didn't show up in the end
result
- incorporate feedback from Michal Hocko, including killing of
the DEVICE_PUBLIC memory type entirely
Changes since v1:
- rebase
- also switch p2pdma to the internal refcount
- add type checking for pgmap->type
- rename the migrate method to migrate_to_ram
- cleanup the altmap_valid flag
- various tidbits from the reviews
====================
Conflicts resolved by:
- Keeping Ira's version of the code in swap.c
- Using the delete for the section in hmm.rst
- Using the delete for the devmap code in hmm.c and .h
* branch 'hmm-devmem-cleanup.4': (24 commits)
mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
mm: remove the HMM config option
mm: sort out the DEVICE_PRIVATE Kconfig mess
mm: simplify ZONE_DEVICE page private data
mm: remove hmm_devmem_add
mm: remove hmm_vma_alloc_locked_page
nouveau: use devm_memremap_pages directly
nouveau: use alloc_page_vma directly
PCI/P2PDMA: use the dev_pagemap internal refcount
device-dax: use the dev_pagemap internal refcount
memremap: provide an optional internal refcount in struct dev_pagemap
memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
memremap: remove the data field in struct dev_pagemap
memremap: add a migrate_to_ram method to struct dev_pagemap_ops
memremap: lift the devmap_enable manipulation into devm_memremap_pages
memremap: pass a struct dev_pagemap to ->kill and ->cleanup
memremap: move dev_pagemap callbacks into a separate structure
memremap: validate the pagemap type passed to devm_memremap_pages
mm: factor out a devm_request_free_mem_region helper
mm: export alloc_pages_vma
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0YK7ceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWfcH/36ep8GZHY9H1ARV
RJJoGoMnwENoq2o4eKhH3iZgUIGPq2uonazequhePwnIsrOdFGT7AeMHWSW7W0o4
wNlNFdUrTe0bvU00m+YtDwNIqgNCnFEoUbqn9H+VhAAWpSydKvhh2mlebTFO50KN
hb9+jh59Q8tbxrQdCuNF6yJATdf4hcj1V/ZZMGgF34kx+dFY4wOooSfu/eaIxXIl
fBDKN9K4Mmw8HWJvebV+ocOMZ7Zqknt1lbjx69OxpJmgxhb2Ks7heqSZanLTBPBB
oZxOlEdNPSyOjBQUlsDC2S8VJ7g5gINZk1JcFjByzE7cIPOQ2UXE72R++wwANngm
SR054NQ=
=WlA8
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc7' into rdma.git hmm
Required for dependencies in the next patches.
The migrate_vma helper is only used by noveau to migrate device private
pages around. Other HMM_MIRROR users like amdgpu or infiniband don't
need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All the mm/hmm.c code is better keyed off HMM_MIRROR. Also let nouveau
depend on it instead of the mix of a dummy dependency symbol plus the
actually selected one. Drop various odd dependencies, as the code is
pretty portable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ZONE_DEVICE support doesn't depend on anything HMM related, just on
various bits of arch support as indicated by the architecture. Also
don't select the option from nouveau as it isn't present in many setups,
and depend on it instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove the clumsy hmm_devmem_page_{get,set}_drvdata helpers, and
instead just access the page directly. Also make the page data
a void pointer, and thus much easier to use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just use devm_memremap_pages instead of hmm_devmem_add pages to allow
killing that wrapper which doesn't provide a whole lot of benefits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
hmm_vma_alloc_locked_page is scheduled to go away, use the proper
mm function directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mode->name is a character array in a structure, checking it's
address is pointless and causes a warning with some compilers:
drivers/gpu/drm/drm_connector.c:144:15: error: address of array 'mode->name' will always evaluate to 'true'
[-Werror,-Wpointer-bool-conversion]
mode->name ? mode->name : "",
~~~~~~^~~~ ~
include/drm/drm_print.h:366:29: note: expanded from macro 'DRM_DEBUG_KMS'
drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
^~~~~~~~~~~
Remove the check here.
Fixes: 3aeeb13d89 ("drm/modes: Support modes names on the command line")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ramalingam C <ramlaingam.c@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628103925.2686249-1-arnd@arndb.de
Despite what I think the prm recommends, commit f2253bd985
("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context") turned out
to be a huge mistake when enabling Ironlake contexts as the GPU would
hang on either a MI_FLUSH or PIPE_CONTROL immediately following the
MI_SET_CONTEXT of an active mesa context (more vanilla contexts, e.g.
simple rendercopies with igt, do not suffer).
Ville found the following clue,
"[DevCTG+]: For the invalidate operation of the pipe control, the
following pointers are affected. The
invalidate operation affects the restore of these packets. If the pipe
control invalidate operation is completed
before the context save, the indirect pointers will not be restored from
memory.
1. Pipeline State Pointer
2. Media State Pointer
3. Constant Buffer Packet"
which suggests by us emitting the INVALIDATE prior to the MI_SET_CONTEXT,
we prevent the context-restore from chasing the dangling pointers within
the image, and explains why this likely prevents the GPU hang.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419111749.3910-1-chris@chris-wilson.co.uk
(cherry picked from commit 928f8f4231 in drm-intel-next)
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111014
Fixes: f2253bd985 ("drm/i915/ringbuffer: EMIT_INVALIDATE after switch context")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since amdgpu has always requested PCIE atomics, kfd don't
need duplicated PCIE atomics enablement. Referring to amdgpu
request result is enough.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU atomics operation depends on PCIE atomics support.
Always enable PCIE atomics ops support in case that
it hasn't been enabled.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new field in amdgpu device is used to record whether the
system has PCIE atomics support. The field can be exposed to
UMD or kfd whether PCIE atomics have supported.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MGPU fan boost feature should not be enabled until all the
devices from the same hive are all back from reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the gfx10 equivalent of the gfx9 code.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: update emit_ib_size
(though it's still wrong because it was wrong before)
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recommended by the hw team.
Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Newer GPD MicroPC BIOS versions have proper DMI strings, add an extra quirk
table entry for these new strings. This is good news, as this means that we
no longer have to update the BIOS dates list with every BIOS update.
Fixes: 652b8b086538("drm: panel-orientation-quirks: Add quirk for GPD MicroPC")
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624154014.8557-2-hdegoede@redhat.com
I'm not entirely sure why this is, but for some reason:
921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:
[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).
And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.
Fixes: 921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Slava Abramov <slava.abramov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Putting a large drm_connector object on the stack can lead to warnings
in some configuration, such as:
drivers/gpu/drm/selftests/test-drm_cmdline_parser.c:18:12: error: stack frame size of 1040 bytes in function 'drm_cmdline_test_res' [-Werror,-Wframe-larger-than=]
static int drm_cmdline_test_res(void *ignored)
Since the object is never modified, just declare it as 'static const'
and allow this to be passed down.
Fixes: b7ced38916 ("drm/selftests: Add command line parser selftests")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628121712.1928142-1-arnd@arndb.de
drm_gem_shmem_create_with_handle() returns a GEM object and attach a
handle to it. When the user closes the DRM FD, the core releases all
GEM handles along with their backing GEM objs, which can lead to a
double-free issue if panfrost_ioctl_create_bo() failed and went
through the err_free path where drm_gem_object_put_unlocked() is
called without deleting the associate handle.
Replace this drm_gem_object_put_unlocked() call by a
drm_gem_handle_delete() one to fix that.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627172414.27231-1-boris.brezillon@collabora.com
commit 6c6de1c9e2 ("ASoC: vc4: vc4_hdmi: don't select unnecessary
Platform")
Current ALSA SoC avoid to add duplicate component to rtd,
and this driver was selecting CPU component as Platform component.
Thus, above patch removed Platform settings from this driver,
because it assumed these are same component.
But, some CPU driver is using generic DMAEngine, in such case, both
CPU component and Platform component will have same of_node/name.
In other words, there are some components which are different but
have same of_node/name.
In such case, Card driver definitely need to select Platform even
though it is same as CPU.
It is depends on CPU driver, but is difficult to know it from Card driver.
This patch reverts above patch.
Fixes: commit 6c6de1c9e2 ("ASoC: vc4: vc4_hdmi: don't select unnecessary Platform")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I'm not entirely sure why this is, but for some reason:
921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Breaks runtime PM resume on the Radeon PRO WX 3100 (Lexa) in one the
pre-production laptops I have. The issue manifests as the following
messages in dmesg:
[drm] UVD and UVD ENC initialized successfully.
amdgpu 0000:3b:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vce1 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume [amdgpu]] *ERROR* amdgpu_device_ip_resume failed (-110).
And happens after about 6-10 runtime PM suspend/resume cycles (sometimes
sooner, if you're lucky!). Unfortunately I can't seem to pin down
precisely which part in psm_adjust_power_state_dynamic that is causing
the issue, but not skipping the display setting setup seems to fix it.
Hopefully if there is a better fix for this, this patch will spark
discussion around it.
Fixes: 921935dc64 ("drm/amd/powerplay: enforce display related settings only on needed")
Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the smu11_driver_if_navi10.h since navi10 smu fw
update to 42.28
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to check the parent of the remote device to check
whether it is available or not, the remote is the device itself.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Rather than having a nested set of for_each_child_of_node() walkers,
use the graph walker to iterate through the endpoints for CRTCs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
If there's a simple-framebuffer carried over from boot firmware, it's going
to stop working once we setup the LCDC for use via DRM. Kick it off from
the hardware.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The driver doesn't consider framebuffer pitch and offset, leading to a
wrong display in case offset != 0 or pitch != width * bpp. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190627081206.23135-1-kraxel@redhat.com
When something goes wrong in the GPU init after the cmdbuf suballocator
has been constructed, we fail to destroy it properly. This causes havok
later when the GPU is unbound due to a module unload or similar.
Fixes: e66774dd6f (drm/etnaviv: add cmdbuf suballocator)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
+ usual progress on cleanups
+ dsi vs EPROBE_DEFER fixes
+ msm8998 (snapdragon 835 support)
+ a540 gpu support (mesa support already landed)
+ dsi, dsi-phy support
+ mdp5 and dpu interconnect (bus/memory scaling) support
+ initial prep work for per-context pagetables (at least the parts that
don't have external dependencies like iommu/arm-smmu)
There is one more patch for fixing DSI cmd mode panels (part of a set of
patches to get things working on nexus5), but it would be conflicty with
1cff7440a8 in drm-next without rebasing or back-merge,
and since it doesn't conflict with anything in msm-next, I think it best
if Sean merges that through drm-mix-fixes instead.
(In other news, I've been making some progress w/ getting efifb working
properly on sdm850 laptop without horrible hacks, and drm/msm + clk stuff
not totally falling over when bootloader enables display and things are
already running when driver probes.. but not quite ready yet, hopefully
we can post some of that for 5.4.. should help for both the sdm835 and
sdm850 laptops.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsj3N4XzDLSDoa+4RHZ9wXObYmhcep0M3LjnRg48BeLvg@mail.gmail.com
There are a couple of spelling mistakes in dm_error messages and
a comment. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make mem_busy_percent sysfs interface invisible on Vega10.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In XGMI configuration, more than one asic can be reset at same time,
kfd is able to handle this and no need to trigger the warning
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set default value of this kernel parameter to 9000
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This seems a merge error.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement Navi10 backend for runtime ppfeatures status retrieving
and setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN DPM is a necessary prerequisite for VCN power gating.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Returning -EAGAIN prevents ttm_bo_mem_space from trying alternate
placements and can lead to live-locks in amdgpu_cs, retrying
indefinitely and never succeeding.
Fixes: d367bd2a5e ("drm/ttm: fix busy memory to fail other user v10")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The buf swap field doesn't exist on RB1.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add COMPILE_TEST dependency to force exynos driver to
built for more than arm and to built modules
that otherwise required other symbols to be de-selected.
This will increase build coverage of the exynos driver
thus allowing most trivial build errors to be detected/fixed early.
This introduces one warning when built using sh:
exynos7_drm_decon.c: In function ‘decon_remove’:
exynos7_drm_decon.c:769:24: warning: unused variable ‘ctx’
struct decon_context *ctx = dev_get_drvdata(&pdev->dev);
This is due to the definition of iounmap() in sh,
and nothing that exynos driver can fix.
Include fix of exynos build for alpha.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Drop use of the deprecated drmP.h file.
Replace with forwards / externals as appropriate.
While touching the list of include files divide
them up in blocks and sort them.
v3:
- fix build errors in exynos_drm_g2d.c (Inki Dae)
The exynos_drm_g2d.c file is not built in the
standard configurations and was therefore missed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Fixed merge conflict.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm-next-5.3-2019-06-25:
Merge drm-next
amdgpu:
- SR-IOV L1 policy fixes
- Removed no longer needed vram_page_split module parameter
- Add module parameter to override default ABM level
- Gamma fixes
- No need to check return values for debugfs
- Improve HMM error handling
- Avoid possible OOM situations when lots of thread are submitting with
memory contention
- Improve hw i2c access abritration
- DSC (Display Stream Compression) support in DC
- Initial navi10 support
* DC support
* GFX/Compute support
* SDMA support
* Power Management support
* VCN support
- Static checker fixes
- Misc cleanups
- fix long udelay on arm
amdkfd:
- Implement priority controls for gfx9
- Enable VEGAM
- Rework mqd allocation and init
- Circular locking fix
- Fix SDMA queue allocation race condition
- No need to check return values for debugfs
- Add proc style process information
- Initial navi10 support
radeon:
- No need to check return values for debugfs
UAPI changes:
- GDDR6 added to vram type query
- New Navi10 details added gpu info query
- Navi family added to asic family query
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625195520.3817-1-alexander.deucher@amd.com
- improve the driver's approach to audio, adding support for more I2S
based formats, particularly other justifications, and preparing the
driver to support other bclk ratios.
- add support for pixel repeated modes, tested with a Panasonic TV.
- correct the quantisation range handling; in particular, do not send
full range RGB to the sink when the sink does not support full range
RGB.
- Send the HDMI vendor info frame when required.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1cSp
-----END PGP SIGNATURE-----
Merge tag 'for-airlie-tda998x' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
TDA998x updates:
- improve the driver's approach to audio, adding support for more I2S
based formats, particularly other justifications, and preparing the
driver to support other bclk ratios.
- add support for pixel repeated modes, tested with a Panasonic TV.
- correct the quantisation range handling; in particular, do not send
full range RGB to the sink when the sink does not support full range
RGB.
- Send the HDMI vendor info frame when required.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Russell King <rmk@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625125005.GA31503@rmk-PC.armlinux.org.uk
Some fixes have been accidentally pushed to this, so I cannot fost-forward.
Required to pull in the remove-fbcon-notifiers fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
drm_connector_update_edid_property can sleep, we must not
call it while holding a spinlock. Move the callsite.
Fixes: b4b01b4995 ("drm/virtio: add edid support")
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190405044602.2334-1-kraxel@redhat.com
Fixes linking fail when fbcon/fbdev is modular and vgaswitcheroo is
enabled:
x86_64-linux-gnu-ld: drivers/gpu/vga/vga_switcheroo.o: in function `vga_switchto_stage2':
vga_switcheroo.c:(.text+0x997): undefined reference to `fbcon_remap_all'
Unfortunately this means that in a default allmodconfig we will disable vgaswitcheroo.
v2: I first tried to fix this with an EXPORT_SYMBOL, but vga_switcheroo is
never a module, so this doesn't work.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 1cd51b5d20 ("vgaswitcheroo: call fbcon_remap_all directly")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624092153.23375-1-daniel.vetter@ffwll.ch
The athub pg features enabling should be indicated by pg_flags.
Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mmhub pg features enabling should be indicated by pg_flags.
Reported-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if not check dpm feature is enabled, it will cause show smc send message
failed log in dmesg log.
eg:
echo "auto" > power_dpm_force_performance_level
v2: whitespace fix (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support gfxclk dpm disablement.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only printf smu version when if version not matched.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the navi asic can't get current rpm by MSG_GetCurrentRpm,
it will cause show fan rpm error, use Metrics_t to replace it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The AVI infoframe is incorrectly programmed on DCN1/2 when enabling a
stream - causing the wrong pixel encoding to be used for display.
This is because the AVI infoframe is programmed before the DIG BE is
connected to the FE and turned on, so enabling the AFMT block doesn't
actually work and the registers subsequently can't be written to.
[How]
Program the infoframe *after* turning on the DIG FE. This was the
behavior previously used but it was incorrectly reverted
when adding the DCN2 HW sequencer code.
v2: Don't call update_info_frame twice
Fixes: 7ed4e6352c ("drm/amd/display: Add DCN2 HW Sequencer and Resource")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mutex for procting SMU during hw_init was removed as system
will be deadlock when smu_populate_umd_state_clk try get SMU mutex.
Therefore need remove the residual mutex from failed path.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1167 sdma_v4_0_start() error: uninitialized symbol 'r'.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Inconsistent indentation and mixed use of brackets.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
amdgpu_dm.c:5637 amdgpu_dm_commit_planes() error: we previously assumed 'acrtc_state->stream' could be null
This seems to be checked for null pretty consistently elsewhere.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1496 amdgpu_hwmon_show_temp() error: uninitialized symbol 'temp'.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:693 amdgpu_set_pp_od_clk_voltage() error: uninitialized symbol 'ret'.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/soc15.c:715 soc15_get_pcie_usage() warn: inconsistent indenting
And a similar one in si.c.
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to protect the comments. The DCN1_01 config
was dopped anyway. Got accidently brought back with the
navi merge.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We may need to sleep for up to 80ms
(8ms per each of up to 10 loop iterations):
/* First DPCD read after VDD ON can fail if the particular board
* does not have HPD pin wired correctly. So if DPCD read fails,
* which it should never happen, retry a few times. Target worst
* case scenario of 80 ms.
*/
Switch udelay to msleep to avoid limits on arm.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ULL is needed for 32 bit arches.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.
This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.
This change fixes audio support for the Valve Index HMD.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.com
This contains a couple of small improvements and cleanups for the Tegra
DRM driver.
-----BEGIN PGP SIGNATURE-----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=T2hU
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.3-rc1
This contains a couple of small improvements and cleanups for the Tegra
DRM driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com
Picking up pace on the upstreaming of Komeda driver, with quite a lot
of new features added this time. On top of that we have the small
cleanups and improved usage of the debugfs functions. Please pull!
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621095349.GI17204@e110455-lin.cambridge.arm.com
These regs are write-only, and the hw throws a hissy-fit (ie. reboots)
when we try to read them for GPU state snapshot, in response to a GPU
hang. It is rather impolite when GPU recovery triggers an insta-
reboot, so lets remove the TPL1 registers from the snapshot.
Fixes: 7198e6b031 drm/msm: add a3xx gpu support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
The gfxoff brings unstability, disable it by default
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For uvd_4/5/6, amdgpu driver will only power on them when
there are jobs assigned to decode/enc rings.uvd_4/5/6 dpm was broken
since amdgpu_dpm_set_powergating_by_smu only covers gfx block.
The change would add more IP block support in amdgpu_dpm_set_powergating_by_smu
For GFX/UVD/VCN/VCE, if the new SMU driver is supported, invoke new
power gate helper function smu_dpm_set_power_gate, otherwise, fallback to
legacy powerplay helper function pp_set_powergating_by_smu. For other IP blocks
always invoke legacy powerplay helper function.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver_find_device() accepts a match function pointer to
filter the devices for lookup, similar to bus/class_find_device().
However, there is a minor difference in the prototype for the
match parameter for driver_find_device() with the now unified
version accepted by {bus/class}_find_device(), where it doesn't
accept a "const" qualifier for the data argument. This prevents
us from reusing the generic match functions for driver_find_device().
For this reason, change the prototype of the driver_find_device() to
make the "match" parameter in line with {bus/class}_find_device()
and adjust its callers to use the const qualifier. Also, we could
now promote the "data" parameter to const as we pass it down
as a const parameter to the match functions.
Cc: Corey Minyard <minyard@acm.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an arbitrary difference between the prototypes of
bus_find_device() and class_find_device() preventing their callers
from passing the same pair of data and match() arguments to both of
them, which is the const qualifier used in the prototype of
class_find_device(). If that qualifier is also used in the
bus_find_device() prototype, it will be possible to pass the same
match() callback function to both bus_find_device() and
class_find_device(), which will allow some optimizations to be made in
order to avoid code duplication going forward. Also with that, constify
the "data" parameter as it is passed as a const to the match function.
For this reason, change the prototype of bus_find_device() to match
the prototype of class_find_device() and adjust its callers to use the
const qualifier in accordance with the new prototype of it.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Sebastian Ott <sebott@linux.ibm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: rafael@kernel.org
Acked-by: Corey Minyard <minyard@acm.org>
Acked-by: David Kershner <david.kershner@unisys.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was replaced with the sw_init callback so is no longer
needed.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change df_init to df_sw_init df 1.7 to prevent regression issues on pre-vega20
products when callback is called in sw_common_sw_init.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous kfd doesn't use gws so this mask was set to 0.
Set it to 64 bit 1s because now kfd can use all 64 gws
resources.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
during navi10 bring up, dwb causes system hang.
to continue debug major issue, disable dwb by
set num-dwb = 0. the hang issue is not reproduced now
by enable num-dwb =1. dc source is shared by all os.
win needs num-dwb = 1.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Before for raven and navi we are calling pp_smu functions for pme
[how]
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for future use
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.
[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.
Signed-off-by: Thomas Lim <Thomas.Lim@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently vmid is decided internally inside dc. With the introduction
of new asics we are required to coordinate vmid use with external
components.
This change converts vmid logic to a DAL module allowing vmid to be
passed in as a parameter to DC.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
dcn2 use fixed clocks and not program DPP CLK or Disp_CLK.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for future use
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
value commited to by HW team is going to be higher
than pre-silicon, and will cause underflow if driver not
updated
[how]
update hardcoded value, update pstate switching logic
to fix case where with long uclk time we won't allow switch
even when we should
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.
The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.
The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used
We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.
[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.
All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.
Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.
The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:
linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...
Now the test is doing:
linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
This is meant to make it clearer that 0xf is not a valid OPP ID, and
that code making use of OPP IDs should not accept this value.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expose this function for future use
Implementation of DCN3 DIO Link Encoder including
dpcs register headers.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add dwb stereo caps and ver for future use
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Alpha surface type for future use
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Existing behavior has overlapping ranges resulting in path
dependent SMU selection
[how]
Make ranges non-overlapping, resulting in non-path dependent
selection
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
According to the latest specs, the max_target bpp sink
can support is 16 bpp.
[how]
update dsc max_target_bpp to 16
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
required for new checks.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current policy assumes virtual DPCD peer device as
an individual MST branch device with 1 input and 1 output.
However this is only true for virtual DP-to-DP peer device.
In general there are three types of virtual DP peer devices.
1. Sink peer device with virtual DPCD.
2. Virtual DP-to-DP Peer device with virtual DPCD.
3. Virtual DP-to-HDMI Protocol Converter Peer Device with
Virtual DPCD.
So we should break the assumption and handle all three types.
[how]
DP-to-DP peer device will have virtual DPCD cap upstream.
Sink peer device will have virtual DPCD on the logical port.
Dp to HDMI protocol converter peer device will have virtual DPCD
on its converter port.
For DSC capable Synaptics non VGA port we workaround by enumerating
a virutal DPCD peer device on its upstream
even if it doesn't have one.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
useful for debugging
[how]
plumb a debug option in dc
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.
The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.
To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.
So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.
[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SwathWidthCThisState is expected to be an unsigned int array.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
when resetting pipes from 480p to dual-pipe 8k, modulo reg write for
video optimized rate updated one pipe without changing the other, causing
sync error
[how]
removed code from dcn2
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The output_bpp pipe parameter was assigned an incorrect value
(color depth enum), and subsequently used to overwrite
the OutputBpp parameter calculated by DML. Seems like this had no
effect except with DSC enabled, which would make DML produce
bad outputs.
[How]
Removed assignment to OutputBpp, fixed output_bpp assignment,
and properly set ForcedOutputLinkBPP instead of OutputBpp.
Also removed condition in DML that prevented forcing of
Output BPP with DSC enabled.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
VM implemenation is missing conversion from HW values in hubbub
DM not passing actual PTB during flip
[how]
add proper HW conversion from logical values
fix cases where we programmed VA even though we are in PA
plumb in PTB from DM
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes for the following:
- Incorrect pointer type (unsigned int instead of double)
- Incorrect DSC number of slices setting
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently DSC power gating is disabled by default because the power
transition doesn't happen, causing a crash on some systems
[how]
Fix the lack of power state transition and enable DSC power gating
by default.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Should do full update when display writeback is updated.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Duke Du <Duke.Du@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dsc adjustment is allowed via stream update sequence.
dsc enablement is only allowed via commit stream sequence.
with the current unified dsc set function, it is hard
to determine which sequence it is called by.
The solution is to decouple dsc adjustment out of enablement
sequence so we can handle them separately.
[how]
decouple dsc adjustment out of enablement.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
current DML logic uses currently trained setting for number
of dp lanes in DML calculations. this is obviously flawed since
just because 1 lane is in use doesn't mean only 1 lane can be used
this causes mode validation to fail depending on current state,
which is incorrect
[how]
DML should always assume 4 lanes are available. validation of
bandwidth is not supposed to be handled by DML, since we do
link validation without DML already
also, DML is expecting there to be a copy of the max state, this
state is removed when update_bounding_box is called to update
actual SKU clocks. fix this as well by duping last state.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Eric Yang <eric.yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN code should make as few references to DCE as possible
[HOW]
Copy DCE110 implementation of find_first_free_match_stream_enc_for_link
into DCN10
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
From DCE110 onward, we have the ability to assign DIG BE and FE
separately for any display connector type; before, we could only do this
for DP.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With DSC power gating enabled, one of the register reads times out occasionally,
causing a DSC test to fail.
[how]
Disable DSC power gating in Diags.
NOTE: This has to be reverted once the problems with DSC power gating are
resolved.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want a test pattern to show up on screen when we're blanked and have
visual confirm enabled, for debugging. Raven does this, it's a mistake that
Navi does not.
[How]
- in "blank_pixel_data", set appropriate DPG pattern for visual confirm
- refactor DPG calls out of "enable_stream_timing"
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds