* acpica: (32 commits)
ACPICA: Update version to 20170728
ACPICA: Revert "Update resource descriptor handling"
ACPICA: Resources: Allow _DMA method in walk resources
ACPICA: Ensure all instances of AE_AML_INTERNAL have error messages
ACPICA: Implement deferred resolution of reference package elements
ACPICA: Debugger: Improve support for Alias objects
ACPICA: Interpreter: Update handling for Alias operator
ACPICA: EFI/EDK2: Cleanup to enable /WX for MSVC builds
ACPICA: acpidump: Add DSDT/FACS instance support for Linux and EFI
ACPICA: CLib: Add short multiply/shift support
ACPICA: EFI/EDK2: Sort acpi.h inclusion order
ACPICA: Add a comment, no functional change
ACPICA: Namespace: Update/fix an error message
ACPICA: iASL: Add support for the SDEI table
ACPICA: Divergences: reduce access size definitions
ACPICA: Update version to 20170629
ACPICA: Update resource descriptor handling
ACPICA: iasl: Update to IORT SMMUv3 disassembling
ACPICA: Disassembler: skip parsing of incorrect external declarations
ACPICA: iASL: Ensure that the target node is valid in acpi_ex_create_alias
...
xgene v1/v2 8250 UARTs don't run at the standard clock rate expected by
the driver and there is no information on clocking available from the
SPCR table. As there has been no progress on relevant vendors updating
DBG2/SPCR specifications to fix this work around this using the previous
xgene quirk handling to avoid setting a baud rate and therefore using
the UART as configured by firmware.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
xgene v1/v2 chips are also used on moonshot cartridges that have
different table headers to the ones on Mustang. Extend the quirk
so it also recognises the Moonshot M400 variant too.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cf27b3c98883d2a15d932016792fcb8272ace96d
The following commit introduces definition of access width to ACPICA.
Commit: 2bece49394
Subject: ACPI: SPCR: Use access width to determine mmio usage
Actually the access bit width can be calculated via access width. It
would be better to define a macro calculating bit width rather than
defining fixed values. This patch thus cleans up the definitions to
reduce divergences.
Link: https://github.com/acpica/acpica/commit/cf27b3c9
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The work-around for Qualcomm Technologies QDF2400 Erratum 44 hinges on a
global variable defined in the pl011 driver. The ACPI SPCR parsing code
determines whether the work-around is needed, and if so, it changes the
console name from "pl011" to "qdf2400_e44". The expectation is that
the pl011 driver will implement the work-around when it sees the console
name. The global variable qdf2400_e44_present is set when that happens.
The problem is that work-around needs to be enabled when the pl011
driver probes, not when the console name is queried. However, sbsa_probe()
is called before pl011_console_match(). The work-around appeared to work
previously because the default console on QDF2400 platforms was always
ttyAMA1. The first time sbsa_probe() is called (for ttyAMA0),
qdf2400_e44_present is still false. Then pl011_console_match() is called,
and it sets qdf2400_e44_present to true. All subsequent calls to
sbsa_probe() enable the work-around.
The solution is to move the global variable into spcr.c and let the
pl011 driver query it during probe time. This works because all QDF2400
platforms require SPCR, so parse_spcr() will always be called.
pl011_console_match still checks for the "qdf2400_e44" console name,
but it doesn't do anything else special.
Fixes: 5a0722b898 ("tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44")
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
APM X-Gene verion 1 and 2 have an 8250 UART with its register
aligned to 32-bit. In addition, the latest released BIOS
encodes the access field as 8-bit access instead 32-bit access.
This causes no console with ACPI boot as the console
will not match X-Gene UART port due to the lack of mmio32
option.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current SPCR code does not check the access width of the MMIO, and
uses a default of 8bit register accesses. This prevents devices that
only do 16 or 32bit register accesses from working. By simply checking
this field and setting the MMIO string appropriately, this issue can be
corrected. To prevent any legacy issues, the code will default to 8bit
accesses if the value is anything but 16 or 32.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For Qualcomm Technologies QDF2400 SOCs that are affected by erratum E44,
the ACPI oem_revision field is actually set to 1, not 0.
Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix typos and add the following to the scripts/spelling.txt:
intialization||initialization
The "inintialization" in drivers/acpi/spcr.c is a different pattern but
I fixed it as well in this commit.
Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Qualcomm Datacenter Technologies QDF2400 family of SoCs contains a
custom (non-PrimeCell) implementation of the SBSA UART. Occasionally the
BUSY bit in the Flag Register gets stuck as 1, erratum 44 for both 2432v1
and 2400v1 SoCs.Checking that the Transmit FIFO Empty (TXFE) bit is 0,
instead of checking that the BUSY bit is 1, works around the issue.
To facilitate this substitution of flags and values, introduce
vendor-specific inversion of Feature Register bits when UART AMBA Port
(UAP) data is available. For the earlycon case, prior to UAP availability,
implement alternative putc and early_write functions.
Similar to what how ARMv8 ACPI PCI quirks are detected during MCFG parsing,
check the OEM fields of the Serial Port Console Redirection (SPCR) ACPI
table to determine if the current platform is known to be affected by the
erratum.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Timur Tabi <timur@codeaurora.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
Console Redirection Table) [2] as a mandatory ACPI table that
specifies the configuration of serial console.
Defer initialization of DT earlycon until ACPI/DT decision is made.
Parse the ACPI SPCR table, setup earlycon if required,
enable specified console.
Thanks to Peter Hurley for explaining how this should work.
[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
[2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki