commit beb4641a78 ("PCI: dwc: Add MSI-X callbacks handler"),
in order to raise MSI-X interrupt, obtained MSIX table address from
Base Address Register (BAR). However BAR only holds PCI address
programmed by the host whereas the MSI-X table should be in the local
memory.
Store the MSI-X table address (virtual address) as part of ->set_bar()
callback and use that to get the message address and message data
here.
Fixes: beb4641a78 ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Protect concurrent access to pci_epf_ops with a mutex.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Use atomic_notifier_call_chain() to notify EPC events like linkup to EPF
driver instead of using linkup ops in EPF driver. This is in preparation
for adding proper locking mechanism to EPF ops. This will also enable to
add more events (in addition to linkup) in the future.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Vidya Sagar <vidyas@nvidia.com>
The address that is allocated using pci_epf_alloc_space() is
directly written to the target address of the Inbound Address
Translation unit (ie the HW component implementing inbound address
decoding) on endpoint controllers.
Designware IP [1] has a configuration parameter (CX_ATU_MIN_REGION_SIZE
[2]) which has 64KB as default value and the lower 16 bits of the Base,
Limit and Target registers of the Inbound ATU are fixed to zero. If the
programmed memory address is not aligned to 64 KB boundary this causes
memory corruption.
Modify pci_epf_alloc_space() API to take alignment size as argument in
order to allocate buffers to be mapped to BARs with an alignment that
suits the platform where they are used.
Add an 'align' parameter to epc_features which can be used by platform
drivers to specify the BAR allocation alignment requirements and use
this while invoking pci_epf_alloc_space().
[1] "I/O and MEM Match Modes" section in DesignWare Cores PCI Express
Controller Databook version 4.90a
[2] http://www.ti.com/lit/ug/spruid7c/spruid7c.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
pci_epf_alloc_space() sets the MEM TYPE flags to indicate a 32-bit
Base Address Register irrespective of the size. Fix it here to indicate
64-bit BAR if the size is > 2GB.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
commit ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry") while adding configfs entry for each
pci_epf_device_id table entry introduced a NULL pointer dereference error
when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled.
Fix it here.
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each
pci_epf_device_id table entry")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We need to use list_for_each_entry_safe() because the
pci_ep_cfs_remove_epf_group() function frees "group".
Fixes: ef1433f717 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
In order to be able to provide correct driver_data for pci_epf device,
a separate configfs entry for each pci_epf_device_id table entry in
pci_epf_driver is required.
Add support to create configfs entry for each pci_epf_device_id
table entry here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Add barno and flags to struct epf_bar.
That way we can simplify epc->ops->set_bar()/pci_epc_set_bar()
by passing a struct *epf_bar instead of a whole lot of arguments.
This is needed so that epc->ops->set_bar() implementations can
modify BAR flags. Will be utilized in a succeeding patch.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Remove the pci_epf_create() goto labels completely and handle the
errors at the respective call site to simplify the function error
handling.
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
'put_device()' calls the relase function 'pci_epf_dev_release()',
which already frees 'epf->name' and 'epf'.
Therefore we must not free them again after 'put_device()'.
Fixes: 5e8cb40338 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions")
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This commit replaces allocating and freeing the intermediate
'buf'/'func_name' with a combination of 'kstrndup()' and 'len'.
'len' is the required length of 'epf->name'.
'epf->name' should be either the first part of 'name' preceding the '.'
or the complete 'name', if there is no '.' in the name.
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
* pci/spdx:
PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement
PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate
PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate
PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
PCI: Add SPDX GPL-2.0 when no license was specified
Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.
Remove the boilerplate GPL version 2 language, relying on the assertion in
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 7232888366 ("of: restrict DMA configuration"),
of_dma_configure() doesn't configure the coherent_dma_mask/dma_mask
of endpoint function device (since it doesn't have a DT node associated
with and hence no dma-ranges property), resulting in
dma_alloc_coherent() (used in pci_epf_alloc_space()) to fail.
Fix it by making dma_alloc_coherent() use EPC's device for allocating
memory address.
Link: http://lkml.kernel.org/r/64d63468-d28f-8fcd-a6f3-cf2a6401c8cb@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: tweaked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Make ->remove() callback optional so that endpoint function drivers don't
have to populate empty ->remove() callback functions.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Make this const as it is only stored in the type field of a device
structure, which is const. Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add an API to get "pci_epf_device_id" matching the EPF name. This can be
used by the EPF driver to get the driver data corresponding to the EPF
device name.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[bhelgaas: folded in "while" loop termination fix from Colin Ian King
<colin.king@canonical.com>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Invoke APIs provided by pci-ep-cfs to create configfs entry for every EPC
device and EPF driver to help users in creating EPF device and binding the
EPF device to the EPC device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Introduce a new EP core layer in order to support endpoint functions in
linux kernel. This comprises the EPC library (Endpoint Controller Library)
and EPF library (Endpoint Function Library). EPC library implements
functions specific to an endpoint controller and EPF library implements
functions specific to an endpoint function.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Kishon Vijay Abraham I