[Why]
A loop inside of build_evenly_distributed_points function that traverse through
the array of points become an infinite loop when m_GammaUpdates does not
get assigned to any value.
[How]
In DMColor, clear m_gammaIsValid bit just before writting all Zeromem for
m_GammaUpdates, to prevent calling build_evenly_distributed_points
before m_GammaUpdates gets assigned to some value.
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b24413180f added
"SPDX-License-Identifier: GPL-2.0" to files which previously had no
license, change this to MIT for radeon matching the license text of the
other radeon files.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b24413180f
'License cleanup: add SPDX GPL-2.0 license identifier to files with no license'
incorrectly added "SPDX-License-Identifier: GPL-2.0" to a file with MIT
license text. Change the SPDX identifier to match the license text.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode UVD status clear
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set VCPU busy after gate power during vcn Static Power Gate start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Sitatic Power Gate mode unused steps during vcn start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Static Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move Static Power Gate mode mc resume after MPC control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN global tiling
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Static Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply new UMC enable for VNC Dynamic Power Gate mode start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove Dynamic Power Gate mode unused steps during VCN start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Dynamic Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN global tiling registers
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update Dynamic Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reduce unnecessary local variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ring write/read pointer check for VCN dynamic power gate mode
stop,to make sure that no job is left in ring before turn off DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest static power gate mode stop function for VCN
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update latest UVD_MPC register for VCN. Use defined
macro to replace value for readability.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new register offset/mask for VCN to support
latest VCN implementation.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] dp debugfs file does not exist for eDP under
/sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For sriov, when first run windows guest, then run linux guest, the gds
vmid0 size will be reset to 0 by windows guest. So if the value has been
reset to 0, then set the value to the default value in linux guest.
v2:
Fixed value instead of reading mmGDS_VMID0_SIZE.
v3:
Set the default value of the switch.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure that we don't race between job completion and
timeout.
v2: put revert label after calling the handling manually
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup starting the timeout a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Give user some hints when the power profile setting is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correctly translate the power profile specified by user to workload
type accepted by SMU fw.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=8MHk
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19-rc8
single nouveau runtime reference and mst change"
* tag 'drm-fixes-2018-10-12-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/drm/nouveau: Grab runtime PM ref in nv50_mstc_detect()
Add a new list.h helper for doing bulk updates. Used by ttm.
- Fixes for display underflow on VI APUs at 4K with UVD running
- Endian fixes for powerplay on vega
- DC fixes for interlaced video
- Vega20 powerplay fixes
- RV/RV2/PCO powerplay fixes
- Fix for spurious ACPI events on HG laptops
- Fix a memory leak in DC on driver unload
- Fixes for manual fan control mode switching
- Suspend/resume robustness fixes
- Fix display handling on RV2
- VCN fixes for DPG on PCO
- Misc code cleanups and warning fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011014739.3117-1-alexander.deucher@amd.com
- Add Maxime to drm-misc maintainer group (Sean)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlu+YzwACgkQlvcN/ahK
BwrmCwf/QIjDH5jqxt/QPYphNBEKTbAbLRZoN4QM7SZ+asyB+qUKmfrEvgy+dy+e
vNKgm/iYdQs9s/YsOjiMqu50C5ZOyqCvlmGsTVyB0Bssn7TDcgDauXKKd54h/FsC
c63IQzQtcslrUTk2aNrCdU3n4X8FcRP4dRG2u5RuHZuE1z97Rjf0YwWjuTavzOig
M3OWlRzvIpT5e2M6k5mjSkRGx7ezLfdwkjxBKhroe6hjgInx5qg8ZCbSHDMfMlSO
YXYHSStl7DiNAIesUaoA3p7tIrNH+KZ1XqzYqvILkvmze8cssRWeQZEgs+mxSxS8
NSqnoLs0BUWcsyhfowBJpETb8e+w0g==
=7V8f
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Fix build failure without CONFIG_DRM_FBDEV_EMULATION (Arnd)
- Add Maxime to drm-misc maintainer group (Sean)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010203951.GA229456@art_vandelay
In case memory resources for *bl_desc* were allocated, release
them before return.
Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d46690155 ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Scrambling is required for supporting any mode over 340MHz. If it's not
supported, reject any modes that would require it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When SCDC is supported, make sure that we configure the GPU and monitor
to the same parameters.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The register programmed by the clock method needs to contain a different
setting for the link speed as well as special divider settings.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
High pixel clocks are required to use a 40 TMDS divider instead of 10,
and even low ones may optionally use scrambling depending on device
support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Per the documentation in drm_get_pci_dev(), this function is deprecated
and shouldn't be used anymore. As it turns out, we're going to need to
stop using drm_get_pci_dev() anyway in order to allow us to turn off the
card before full system shutdowns, otherwise we'll hit race conditions
with userspace while trying to tear down the card on shutdown.
So, start using drm_dev_get() and drm_dev_put(), and just turn our
load/unload callbacks into open coded init/fini() functions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We forget to free drm in all instances of failure, and additionally also
forget to destroy the master client if the other client fails
initialization.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's literally no difference between any of the backlight init
functions besides the backlight properties they set and the backlight
callbacks that they set, so move all of the duplicated backlight init
code out of there and into nouveau_backlight_init().
This gets rid of a lot of copy pasta!
Changes since v1:
- Some of the pre-refactor callbacks were storing nv_encoder in callback
data for the backlight devices that they registered, as opposed to
nouveau_drm. This got missed and caused some bugs that didn't
originally appear on my setup (NULL kernel derefs) for some reason.
So, fix this by finding the nouveau_encoder in
nouveau_backlight_init(), and using that as the callback data for all
gens instead even if they don't care about the encoder.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jeffery Miller <jmiller@neverware.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Still no functional changes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
More consistent with the rest of the codebase, no functional changes
here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since we're about to use this in nouveau_backlight.c. Same thing as
DRM_WARN_ONCE, DRM_INFO_ONCE, etc...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remember, ida IDs start at 0, not 1!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Move all entries between @first and including @last before @head.
This is useful for LRU lists where a whole block of entries should be
moved to the end of the list.
Used as a band aid in TTM, but better placed in the common list headers.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move copy_array helpers to smu_helper.c and share between
vega12 and vega20.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c: In function 'amdgpu_ucode_init_bo':
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:431:39: warning:
variable 'header' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c: In function 'psp_v11_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v11_0.c:309:19: warning:
variable 'ring' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c: In function 'destroy_queue_cpsch':
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:1366:7: warning:
variable 'preempt_all_queues' set but not used [-Wunused-but-set-variable]
It never used since introduct in
commit 992839ad64 ("drm/amdkfd: Add static user-mode queues support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several switch statements that are missing break statements.
Add missing breaks to handle any fall-throughs corner cases.
Detected by CoverityScan, CID#1457175 ("Missing break in switch")
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.
So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma2.4 is only for iceland. For Vi, we don't maintain the
direct fw loading.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the warning message:
"-1 is not supported on VI"
the -1 is the default fw load type, mean auto.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract the function of fw loading out of powerplay.
Do fw loading between hw_init/resuem_phase1 and phase2
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases.
Will do fw loading via smu/psp between the two phases.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable clean is unnecessary.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. one is for create/free bo when init/fini
2. one is for fill the bo before fw loading
the ucode bo only need to be created when load driver
and free when driver unload.
when resume/reset, driver only need to re-fill the bo
if the bo is allocated in vram.
Suggested by Christian.
v2: Return error when bo create failed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix cg/pg unexpected set in hw init failed case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. only call late_init when hw_init successful,
so check status.hw instand of status.valid in late_init.
2. set status.late_initialized true if late_init was not implemented.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the vram_start is 0 case, the gart range will be from 0x0000FFFF00000000
to 0x0000FFFF1FFFFFFF, which will cause the engine hang.
So to avoid the hole, limit the max mc address to AMDGPU_GMC_HOLE_START.:wq
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix CPDMA hang in PRT mode, set CPF_INT_DMA in reg CP_MECx_F32_INT_DIS for Compute and set DISABLE_GFX_HALT_ON_UTCL1_ERROR in reg CP_DEBUG for GFX
Affected ASICs: Vega10 Vega12 Raven
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun.Li <yukun1.li@amd.com>
Tested-by: Maciej.Jesionowski <maciej.jesionowski@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add CP_DEBUG register definition.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RV2 resource is limit to 3 pipes. Limitation should apply to all HW
blocks instead of front pipe.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong index for pstate debug test register
[How]
Add correct index value for dcn1_01 in hubbub1_construct()
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This time mostly further refinement of dpu1+a6xx for sdm845 and
beyond.. and hurray for more negative diffstat :-)
- Misc cleanups and fixes
- GPU preemption optimization
- a6xx perf improvements and clock fixes (ie. lets actually not run at
minimum clks)
- a6xx devfreq/DCVS
- Lots of code cleanup across dpu (Bruce, Jeykumar, Sean)
- Fixed a few crashes on startup relating to dsi (Sean)
- Add cursor support (Sravanthi, Sean)
- Properly free mdss irq on destroy (Jordan)
- Use correct encoder_type when initializing, fixes crash on boot (Stephen)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsNevCzMiLuNW1EVN6gtP3JZSir6PfnWvnCavSZM+bUFQ@mail.gmail.com
initialize gfx/sdma before dpm features enabled.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx and sdma can be initialized before smu.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
with this interface, gfx/sdma can be initialized
before smu.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ucode bo is needed by request_smu_load_fw,
the request_smu_load_fw maybe called by gfx/sdma
before smu hw init.
so move amdgpu_ucode_bo_init to request_smu_lowd_fw
from smu hw init.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
driver don't release the ucode memory when suspend. so don't
need to allocate bo when resume back.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_FW_LOAD_DIRECT is used for bring up.
Now it don't work any more. so remove the support.
v2: Add warning message if user select
AMDGPU_FW_LOAD_DIRECT/AMDGPU_FW_LOAD_PSP on VI.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct VCN cache window definition. The old one
is reused from UVD, and it is not fully correct.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace value with defined macro to make
code more readable
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use mmUVD_SCRATCH2 tracking decode write point.
It will help avoid dpg pause mode hang issue.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following WREG32_SOC15_DPG_MODE will overwrite register
mmUVD_CGC_CTRL. This code can be removed.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So a few days ago I started getting sprays of these warnings --
sorry, but because it was a few days ago I'm not sure what I was
running at the time (but it was probably either Stellaris or Chromium).
Sep 25 22:06:34 mutilate err: : [ 544.718905] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.718909] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.719710] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.719714] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.719862] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.719865] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate err: : [ 544.720772] [drm:radeon_cs_parser_relocs] *ERROR* gem object lookup failed 0xc
Sep 25 22:06:34 mutilate err: : [ 544.720778] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -2!
Sep 25 22:06:34 mutilate warning: : [ 544.721415] radeon 0000:01:00.0: vbo resource seems too big for the bo
followed by a massive stream of "vbo resource seems too big for the bo".
The most extreme flood ran from 23:01:58 to 23:02:47 and emitted 91,000
lines of log in that time. This... seems excessive, given that each log
message after the first contains more or less no information.
So ratelimit these messages. (We probably want to see at least *some* so
that the underlying bug can be fixed -- always assuming the bug isn't in
unfixable closed-source game code somewhere.)
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a second irq source because of a different src_id is actually a
bug.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That also simplifies handling quite a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. we never submit IBs to the KIQ
2. there seems to be ~500ms delay during amdgpu resume spent in KIQ,
hence pointing toward interrupts are not working correctly.
[How]
remove interrupt handling for KIQ.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>i
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. We never submit IBs to KIQ.
2. Ring test pass without KIQ's ring also.
3. By skipping we see an improvement of around 500ms
in the amdgpu's resume time.
[How]
skip IB tests for KIQ ring type.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or <.
drivers/gpu/drm/scheduler/sched_entity.c:470:6: warning: logical not is
only applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
if (!spsc_queue_count(&entity->job_queue) == 0 ||
^ ~~
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
after the '!' to evaluate the comparison first
if (!spsc_queue_count(&entity->job_queue) == 0 ||
^
( )
drivers/gpu/drm/scheduler/sched_entity.c:470:6: note: add parentheses
around left hand side expression to silence this warning
if (!spsc_queue_count(&entity->job_queue) == 0 ||
^
( )
1 warning generated.
It assumes the author might have made a mistake in their logic:
if (!a == b) -> if (!(a == b))
Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:
if (!1 == 0) -> if (0 == 0) -> if (true)
Alternatively:
if (!1 == 0) -> if (!!1) -> if (1)
Simplify this comparison so that Clang doesn't complain.
Fixes: 35e160e781 ("drm/scheduler: change entities rq even earlier")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The request_smu_load_fw of VI is used to load gfx/sdma
ip's firmware.
Check whether the gfx/sdma firmware have been loaded successfully
in this callback function.
if failed, driver can exit to avoid gpu hard hung.
if successful, clean the flag reload_fw to avoid duplicated fw load.
when suspend/resume, driver need to reload fw.
so in suspend, reset the reload_fw flag to true to enable load fw when
resume.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to know SoftRegsStart value to visit the register
UcodeLoadStatus to check fw loading state.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if upload firmware failed, no matter how many times
the function runs again, the same error will be encountered.
so remove the duplicated code.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move in_suspend flag to adev from gfx, so
can be used in other ip blocks, also keep
consistent with gpu_in_reset flag.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On CI/AI, fw was not loaded by smu, but
smu's fw still need to be released
when driver fini.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the struct was not in use any more.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
don't need to set fan1_enable to read fan sensors.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Following lm-sensors 3.0.0,
Only enable pwm1 sysfs when fan control mode(pwm1_enable)
in manual
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add fan1_target for get/set fan speed in RPM unit
Add fan1_min/fan1_max for get min, max fan speed in RPM unit
Add fan1_enable to enable/disable the fan1 sensor
v3: drop the hardcode value of min/max rpm in comments pointed
out by Alex.
v2: query the min/max rpm gpu support instand of hardcode value.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so user can query the RPM range
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For getting the min/max fan speed in RPM units.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. make uvd_v7_0_enc_get_destroy_msg static
2. drop a function variable that always true
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().
[Why]
This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.
Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):
**THREAD 1** | **THREAD 2**
|
Initialize atomic state for flip |
|
Queue worker |
...
| Do work for flip
|
| Signal hw_done() on CRTC 1
| Signal hw_done() on CRTC 2
|
| Wait for flip_done() on CRTC 1
<---- **PREEMPTED BY THREAD 1**
Initialize atomic state for cursor |
update (1) |
|
Do cursor update work on both CRTCs |
|
Clear atomic state (2) |
**DONE** |
...
|
| Wait for flip_done() on CRTC 2
| *ERROR*
|
The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)
Some things to note:
* Due to the mirrored configuration, the cursor updates on both CRTCs.
* At this point, the pflip IRQ has already been handled, and flip_done
signaled on all CRTCs. The cursor commit can therefore continue.
* The old_crtc_states used by the cursor update are the **same states**
as the new_crtc_states used by the flip worker.
At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.
(*) Technically, 'state->crtcs[i].state' is freed, which was made to
reference old_crtc_state in drm_atomic_helper_swap_state()
[How]
By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.
Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns when one enumerated type is implicitly converted to another.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:315:19: warning:
implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/i2caux/dce110/aux_engine_dce110.c:349:19:
warning: implicit conversion from enumeration type 'enum
aux_channel_operation_result' to different enumeration type 'enum
aux_transaction_reply' [-Wenum-conversion]
reply->status = AUX_CHANNEL_OPERATION_FAILED_HPD_DISCON;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The current enum is incorrect, it should be from aux_transaction_reply,
so use AUX_TRANSACTION_REPLY_HPD_DISCON.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICS that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and dce110 set_bandwidth this was removed
for power saving considerations.
This changed caused corruption under certain display configurations.
Originally thought to be Vega specific, it was also observed on Polaris.
[How]
The 15% is brought back but its placement differs from the original
patch. This boost should only be enable while DFS bypass is inactive.
This (like the Vega patch) is also a workaround that should be
removed after the root cause is identified.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to a small pre-fetch window, the active vline timing is a couple
of lines off when compared to what it should be.
[How]
Changed the calculation for the start vline to account for this window.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description] interlace mode shows wrong vertical timing.
Interface timing in Edid is half vertical timing as progressive timing.
driver doubled the vertical timing in edid_paser,
no need to double in optc again.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no reason why the common data needs to be kept separate.
[How]
Flatten the struct by moving common data into the DM IRQ struct.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ddc engines were recently changed to be independently tracked
from pipe count. the change was reflected in resource constructor
but not in destructor. this manifests as a memory leak when
pipe harvesting is enabled, since not all constructed ddc engines
are freed
[how]
make destructor symmetric with constructor for all dcX_resource
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DF keeps awake after S0i3 resume due to DRAM_STATE_CNTL
is set by bios command table during dcn init_hw.
[How]
As a work around, check STATE_CNTL status before init_hw,
if it is 0 before init_hw and set to 1 after init_hw,
change it to 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All ASICS we support has YCbCr support, so
the check is unnecessary, the currently logic
in validate output also returns true all
the time, so the unneccessary logic is removed
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently not supported, will black screen when set.
[How]
Fail validate timing helper for those modes.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also add dram clock to clocks struct, for systems that uses them.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously bandwidth validation was failing because swizzle mode was not
initialized during plane_state allocation. The swizzle mode was
calculated using pixed format which is how swizzle mode is initially
calculated in addrlib.
[How]
* Set default swizzle mode for validation to DC_SW_UNKNOWN
* Created new function in dcn10_assign_swizzle_mode which sets the
plane swizzle mode based on selected pixed format
* Added the call of assign_swizzle_mode into dc_validate_global_state
* Set failsafe swizzle mode back to DC_SW_LINEAR
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Same functions exist for all other signal types.
[how]
Add a function that checks against virtual signal type.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI_scramber is not enabled for pixel rate >340Mhz.
[How]
Calculate the phy clock to include the Hw frame packing factor.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Sometimes there are indications that the incorrect driver is being
loaded in automated tests. This change adds the ability for builds to
be tagged with a string, and picked up by the test infrastructure.
[how]
dc.c will allocate const for build id, which is init-ed with default
value, indicating production build. For test builds, build server will
find/replace this value. The test machine will then verify this value.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
HW CG feature will be enabled after hw ip initialized
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the vcn power will be controlled by VCN.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu only expose interface to other ip blocks.
in order to reduce dependence between smu and other ip blocks
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA IP can be power up/down via smu message
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The minRPM speed maybe equal to zero. so need to check
input RPM not equal to 0, otherwise cause divide-by-zero driver crash.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set the target rpm value to wrong register.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added Vega20 specific implementation for MGPU fan boost
feature.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MGPU fan boost feature is enabled only when two or more dGPUs
in the system.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Count all GPU instances from AMD(including iGPUs and
dGPUs) in the system.
V2: drop unnecessary initialization for other gpu_info
members except mutex
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the profile name line match previous generations more closely.
E.g.,
0 3D_FULL_SCREEN :
vs:
0(3D_FULL_SCREEN )
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vega10 and Vega20, the always on CUs are 12.
For Raven, it's 4.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable LBPW support on vega20.
v2: squash in warning fix (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Manual fan RPM and pwm setting on vega20 are
available now.
V2: correct the register for fan speed setting and
avoid divide-by-zero
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export the correct gfx voltage by hwmon interface.
V2: update the register naming for consistency
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ppt limit read out by hwmon interface is always 0.
Correct this hwmon interface output.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: a2c3c0a54d drm/msm/a6xx: Add devfreq support for a6xx
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The CP performance counter selects were accidentally marked as protected
so they couldn't be written from PM4 streams. Remove the protection
because user space does have an interest in setting up their own
counters.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We are currently leaking a drm_crtc_commit struct for every atomic
commit containing plane state. The dpu plane destroy function cleans up
the fb reference manually, but fails to release the commit ref. As a
result, we just keep allocating drm_crtc_commits without ever freeing
them. Fortunately there's a helper function which will clean up all of
our mess at once, so use that.
Thanks to Doug Anderson for reporting the memory leak (and leaving
breadcrumbs from kmemleak!).
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: de0a3d094d drm/msm: re-factor devfreq code
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:
kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)
Signed-off-by: Kees Cook <keescook@chromium.org>
size for AFBC buffers
The size of the superblocks being added to the total AFBC buffer size
got lost in the upstreaming process. Add it back.
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
drm_mode_setcrtc() retries modesetting in case one of the functions it
calls returns -EDEADLK. connector_set, mode and fb are freed before
retrying, but they are not set to NULL. This can cause
drm_mode_setcrtc() to use those variables.
For example: On the first try __drm_mode_set_config_internal() returns
-EDEADLK. connector_set, mode and fb are freed. Next retry starts, and
drm_modeset_lock_all_ctx() returns -EDEADLK, and we jump to 'out'. The
code will happily try to release all three again.
This leads to crashes of different kinds, depending on the sequence the
EDEADLKs happen.
Fix this by setting the three variables to NULL at the start of the
retry loop.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917110054.4053-1-tomi.valkeinen@ti.com
The variable is declared in an #ifdef section, but the user is
now unconditional, which leads to a build failure:
drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind':
drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'?
Remove the remaining #ifdef as well.
Fixes: f53705fd98 ("drm/imx: Use drm_fbdev_generic_setup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
While we currently grab a runtime PM ref in nouveau's normal connector
detection code, we apparently don't do this for MST. This means if we're
in a scenario where the GPU is suspended and userspace attempts to do a
connector probe on an MSTC connector, the probe will fail entirely due
to the DP aux channel and GPU not being woken up:
[ 316.633489] nouveau 0000:01:00.0: i2c: aux 000a: begin idle timeout ffffffff
[ 316.635713] nouveau 0000:01:00.0: i2c: aux 000a: begin idle timeout ffffffff
[ 316.637785] nouveau 0000:01:00.0: i2c: aux 000a: begin idle timeout ffffffff
...
So, grab a runtime PM ref here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media
bus enum.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This mm_struct pointer should never be dereferenced. If running in
a user thread, just use current->mm. If running in a kernel worker
use get_task_mm to get a safe reference to the mm_struct.
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().
[Why]
This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.
Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):
**THREAD 1** | **THREAD 2**
|
Initialize atomic state for flip |
|
Queue worker |
...
| Do work for flip
|
| Signal hw_done() on CRTC 1
| Signal hw_done() on CRTC 2
|
| Wait for flip_done() on CRTC 1
<---- **PREEMPTED BY THREAD 1**
Initialize atomic state for cursor |
update (1) |
|
Do cursor update work on both CRTCs |
|
Clear atomic state (2) |
**DONE** |
...
|
| Wait for flip_done() on CRTC 2
| *ERROR*
|
The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)
Some things to note:
* Due to the mirrored configuration, the cursor updates on both CRTCs.
* At this point, the pflip IRQ has already been handled, and flip_done
signaled on all CRTCs. The cursor commit can therefore continue.
* The old_crtc_states used by the cursor update are the **same states**
as the new_crtc_states used by the flip worker.
At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.
(*) Technically, 'state->crtcs[i].state' is freed, which was made to
reference old_crtc_state in drm_atomic_helper_swap_state()
[How]
By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.
Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement routines to estimate GPU busy time and fetching the
current frequency for the polling interval. This is required by
the devfreq framework which recommends a frequency change if needed.
The driver code then tries to set this new frequency on the GPU by
sending an Out Of Band(OOB) request to the GMU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The devfreq framework requires the drivers to provide busy time estimations.
The GPU driver relies on the hardware performance counteres for the busy time
estimations, but different hardware revisions have counters which can be
sourced from different clocks. So the busy time estimation will be target
dependent. Additionally on targets where the clocks are completely controlled
by the on chip microcontroller, fetching and setting the current GPU frequency
will be different. This patch aims to embrace these differences by re-factoring
the devfreq code a bit.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a simple function to read 64 registers in the GMU domain
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Devfreq turns on and starts recommending power level as soon as it is
initialized. The GPU is still not powered on by the time the devfreq
init happens and this leads to problems on GPU's where register access
is needed to get/set power levels. So we start suspended and only restart
devfreq when GPU is powered on.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
BackMerge v4.19-rc6 into drm-next
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aoJQ
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add out-bridge support
- This patch series enables out-bridge for LVDS bridge device support,
and also includes two cleanups and one relevant dt binding update
for this.
Add Samsung 16x16 tiled format support
- This patch series adds Samsung 16x16 tiled format to scaler and
gsc drivers. As for this, it adds Samsung specific format to
drm_forcc.h header. For the git-pull request with relevant patches,
I requested ack-by[1] to relevant maintainers but there was no any response.
I'm pretty sure no problem to go to mainline though Exynos tree
because the only user of it is Exynos.
(airlied: this looked fine to me)
[1] https://patchwork.freedesktop.org/patch/243921/
Add configurable plane alpha and pixel blend mode support
- This patch series makes mixer driver to be configuragle for
pixel blend mode and plane alpha, which also includes one fixup
to set all default values correctly after reset.
One cleanup
- This patch replaces drm_atomic_helper_suspend/resume() with
drm_mode_config_helper_suspend/resume() to remove exynos specific
suspend_state.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
Cc: Neil Armstrong <narmstrong@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlu1H1cACgkQlvcN/ahK
Bwq9Lgf/RxZs3/4x6BQi0uNaJ+InuQDaPy91VWM7J4VSvTvPkDGQJgQS4a4AQqK8
p41rodzdFGhbE1C3GeWKd2eGDYG2+8M5xSzQ4F1q0gAJhseaJgC1EW3AP9zZRHwU
ByVLflSW3KJKXST+Id4pF10cVs1X1RZCkUQj7T6uRaM9i7bFXekwLJrV/cHRrnnV
KbYpzMq6s+JRxaLKp8s4OIfdpVxHxTYtj34S22r5D56X3N5NF+wg1MZQgaH4prjk
Bbc7Y5HfH2GgTaSc1X7haD/HAPfAST0YZmkew1OsWddIuCTKECddXYelVEA3B8+1
nBNKZXlqldPOwnvOMiqz52U+2o/aKw==
=zl4K
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2018-10-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil)
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003195957.GA64584@art_vandelay
The target definition for a630 didn't set a reasonable
value for inactive_period so it defaulted to zero and
we were essentially powering down after every submission.
Set it back to the default value to keep the GPU from
bouncing too much during regular workloads.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The only HFI communication with the GMU on sdm845 happens
during initialization and all commands are synchronous. A fancy
interrupt tasklet and associated infrastructure is entirely
not eeded and puts us at the mercy of the scheduler.
Instead poll for the message signal and handle the response
immediately and go on our way.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The point of the 'force_dma' parameter for of_dma_configure
is to force the device to be set up even if DMA capability is
not described by the firmware which is exactly the use case
we have for GMU - we need SMMU to get set up but we have no
other dma capabilities since memory is managed by the GPU
driver. Currently we pass false so of_dma_configure() fails
and subsequently GMU and GPU probe does as well.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In the case where preemption is not enabled, this patch simply skips
preemption related initialization in hardware init sequence.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The return from the call to _mixer_stages can be a negative error
code however this is being assigned to an unsigned variable 'stages'
hence the check is always false. Fix this by making 'stages' an
int.
Detected by Coccinelle ("Unsigned expression compared with zero:
stages < 0")
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The current design greedily takes a big chunk of the PDC
register space instead of just the GPU specific sections
which conflicts with other drivers and generally makes
a mess of things.
Furthermore we only need to map the GPU PDC sections
just once during init so map the memory inside the function
that uses it and adjust the pointers and register offsets
accordingly.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
>From the review for the DT bindings for the GPU/GMU it
was suggested that the phandle for the GMU be
'qcom,gmu' instead of just 'gmu'.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture
doesn't pass the correct parameters.
drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’:
drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types]
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
In current code the function msm_gpu_crashstate_capture parameters.
Fixes: cdb95931de ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-By: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The index of the perf table was being set in the wrong bit position
in the register. With this fix, the GPU clock can be seen running at
desired frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The [v]snprintf() functions return the size that *would have* been
written into the buffer, rather than the size *actually* written.
Which results in us trying to memcpy() past the end of the stack.
What we really want is [v]scnprintf().
Signed-off-by: Rob Clark <robdclark@gmail.com>
cur_master in dpu_encoder is assigned at modeset and cleared on
.disable(). Unfortunately dpms (or enable/disable) does not guarantee a
modeset, so cur_master is NULL when we try to re-enable it.
This patch moves the NULL assignment to setup_display where it will be
re-assigned later in the function.
Tested-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Remove unneeded checks from _dpu_plane_get_aspace.
v3: change _dpu_plane_get_aspace to return a struct
*msm_gem_address_space instead passing in a pointer of the same
type to edit. Remove uneeded arguments.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removed all impossible checks from the function, which eliminates
the need for a return value. This function is also never used
outside of dpu_plane.c, so the function is made static.
v3: Using helper function _dpu_plane_get_kms() instead of doing
it locally.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes redundant tests for _dpu_crtc_vblank_enable_no_lock.
Function return type is now void and all function calls have
been changed accordingly.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
All checks for _dpu_crtc_power_enable are not true, so the function
can never return an error code. This removes the need for the
function as pm_runtime functions can be used instead.
v3: Separated _dpu_crtc_power_enable into _dpu_crtc_power_enable and
_dpu_crtc_power_disable for clarity.
v4: Removed both _dpu_crtc_power_enable and _dpu_crtc_power_disable
and called pm_runtime_get_sync and pm_runtime_put_sync from all
call points
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes impossible checks in dpu_crtc.c.
Variable assignments are moved up to be initializations where
possible. Some variables are no longer used, these are removed.
v3: reverted back to original patch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes unnecessary checks from dpu_plane_atomic_disable, old_state
argument for both dpu_plane_atomic_disable and
dpu_plane_sspp_atomic_update is removed as it is no longer used.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Removes some checks from dpu_plane.c that will never result in an error.
Subsequent variable assignments become part of the initialization wherever
possible. Unused variables are removed.
v3: removed additional impossible checks and called helper function
_dpu_plane_get_kms() where possible.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
TP_printk is not synchronous, so storing pointers and then later
dereferencing them is a Bad Idea. This patch stores everything locally to
avoid display stomped memory.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
[seanpaul fixed up commit msg typo on apply]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's useful to know which bits of the flush come from extra_flush_bits
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We're printing the frame_busy_mask in a trace, but after it's been
cleared. This, as it turns out, is pretty pointless.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
There's no benefit in falling out of the if, just return directly.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
All of the checks in dpu_plane_sspp_atomic_update() are impossible, so
remove them and make the function void. This removes the need to error
check in dpu_plane_atomic_update(). Additionally, remove impossible checks
in dpu_plane_atomic_update().
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
plane->state->visible encompasses all of these checks and more, so we
can just check visible.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
It's doing the same thing dpu_plane_enabled() is.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
dpu_plane_atomic_check() is a very thin wrapper around
dpu_plane_sspp_atomic_check(). All it does is a NULL-check of state->fb,
which is already done by drm_atomic_helper_check_plane_state(). Further,
the helper sets state->visible = false when this is true. So remove
dpu_plane_atomic_check() and just use dpu_plane_sspp_atomic_check()
directly.
Changes in v2:
- Fix spelling mistake in Subject (Jeykumar)
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
src/dst rects are checked in both atomic_check and atomic_update, with
the more comprehensive check occurring in atomic_update, which is
backwards. So consolodate the checks in atomic_check.
Changes in v2:
- Use the correct crtc state (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch removes some checks which are impossible to hit. As a result,
we can move some of the local var assignments into the declarations.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
enum dpu_ad isn't used and can be safely removed.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
RM maintained a redundant definition for display topology
to identify the no. of hw blocks needed for a display
and their hardware dependencies. This information can be
implicitly deduced from the msm_display_topology structure
available in RM reserve request. In addition to getting
rid of the redundant topology, this change also removes
the topology name enums and their usages.
changes in v4:
- remove the topology name enum entirely (Sean)
changes in v5:
- remove RM topology definition and their
references (Sean)
- Implement helper for dual mixer CRTC (Sean)
changes in v6:
- avoid heap memory for topology (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
DPU, being over protective, validates every parameter of a
module. This change traces the call stack for some of encoder
functions affected by previous set of clean up patches and
cleans up unwanted validations.
changes in v5:
- Introduced in the series
changes in v6:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Connector states were passed around RM to update the custom
topology connector property with chosen topology data. Now that
we got rid of both custom properties and topology names, this
change cleans up the mechanism to pass connector states across
RM helpers and encoder functions.
changes in v5:
- Introduced in the series
changes in v6:
- remove parameter checking in rm reserve (Jordan)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Su Sung Chung