Commit Graph

212 Commits

Author SHA1 Message Date
Vegard Nossum da4f8ab224 cpupower: fix reference to nonexistent document
[ Upstream commit 6feb1a9641197ee630bf43b5c34ea1d9f8b4a0aa ]

This file was renamed from .txt to .rst and left a dangling reference.
Fix it.

Fixes: 151f4e2bdc ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20 11:59:33 +01:00
Shuah Khan af75504c38 cpupower: Add Georgian translation to Makefile LANGUAGES
Commit 4680b734e7 ("cpupower: Add Georgian translation") added
new language support. This change didn't add "ka" to Makefile
LANGUAGES variable. Add it now.

Reported-by: Temuri Doghonadze <temuri.doghonadze@gmail.com>
Reported-by: Zurab Kargareteli <zuraxt@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-08-17 14:28:16 -06:00
Likhitha Korrapati 99481d2195 cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
For both the d and e options in 'cpupower idle_set' command, an
atoi() conversion is done without checking if the input argument
is all numeric. So, an atoi conversion is done on any character
provided as input and the CPU idle_set operation continues with
that integer value, which may not be what is intended or entirely
correct.

The output of cpuidle-set before patch is as follows:

[root@xxx cpupower]# cpupower idle-set -e 1$
Idlestate 1 enabled on CPU 0
[snip]
Idlestate 1 enabled on CPU 47

[root@xxx cpupower]# cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47

[root@xxx cpupower]# cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47

[root@xxx cpupower]# cpupower idle-set -d qw
Idlestate 0 disabled on CPU 0
[snip]
Idlestate 0 disabled on CPU 47

This patch adds a check for both d and e options in cpuidle-set.c
to see that the idle_set value is all numeric before doing a
string-to-int conversion using strtol().

The output of cpuidle-set after the patch is as below:

[root@xxx cpupower]# ./cpupower idle-set -e 1$
Bad idle_set value: 1$. Integer expected

[root@xxx cpupower]# ./cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47

[root@xxx cpupower]# ./cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47

[root@xxx cpupower]# ./cpupower idle-set -d qw
Bad idle_set value: qw. Integer expected

Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:07:08 -06:00
Wyes Karny eb426fc6bd cpupower: Add turbo-boost support in cpupower
If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present
turbo-boost is feature is supported in the hardware. By default this
feature should be enabled. But to disable/enable it write to the sysfs
file. Use the same to control this feature via cpupower.

To enable:
cpupower set --turbo-boost 1

To disable:
cpupower set --turbo-boost 0

Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:07:01 -06:00
Wyes Karny df8776b036 cpupower: Add support for amd_pstate mode change
amd_pstate supports changing of its mode dynamically via `status` sysfs
file. Add the same capability in cpupower. To change the mode to active
mode use below command:

cpupower set --amd-pstate-mode active

Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:06:56 -06:00
Wyes Karny f2ab555711 cpupower: Add EPP value change support
amd_pstate and intel_pstate active mode drivers support energy
performance preference feature. Through this user can convey it's
energy/performance preference to platform. Add this value change
capability to cpupower.

To change the EPP value use below command:
cpupower set --epp performance

Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:06:49 -06:00
Wyes Karny 1ce5ab7c1d cpupower: Add is_valid_path API
Add is_valid_path API to check whether the sysfs file is present or not.

Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:06:44 -06:00
Wyes Karny a1cf97c2d4 cpupower: Recognise amd-pstate active mode driver
amd-pstate active mode driver name is "amd-pstate-epp". Use common
prefix for string matching condition to recognise amd-pstate active mode
driver.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-18 16:06:36 -06:00
Ben Hutchings d7de5d8e40 cpupower: Bump soname version
Several functions in the libcpupower API are renamed or removed in
Linux 4.7.  This is an backward-incompatible ABI change, so the
library soname should change from libcpupower.so.0 to
libcpupower.so.1.

Fixes: ac5a181d06 ("cpupower: Add cpuidle parts into library")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-07-13 12:55:42 -06:00
Wyes Karny c2adb1877b cpupower: Make TSC read per CPU for Mperf monitor
System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading.  To lower this drift read TSC per CPU and also just after mperf
read.  This technique improves C0 percentage calculation in Mperf monitor.

Before fix: (System 100% busy)

              | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   0| 256| 84.62| 15.38|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1|   1| 87.15| 12.85|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   1| 257| 84.08| 15.92|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2|   2| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   2| 258| 83.26| 16.74|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3|   3| 86.61| 13.39|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   3| 259| 83.60| 16.40|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4|   4| 86.33| 13.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   4| 260| 83.33| 16.67|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5|   5| 86.06| 13.94|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   5| 261| 83.05| 16.95|  2695||168659003|3970468||  0.00|  0.00| 0.00
   0|   6|   6| 85.51| 14.49|  2695||168659003|3970468||  0.00|  0.00| 0.00

After fix: (System 100% busy)

             | Mperf              || RAPL        || Idle_Stats
 PKG|CORE| CPU| C0   | Cx   | Freq  || pack | core  || POLL | C1   | C2
   0|   0|   0| 98.03|  1.97|  2415||163295480|3811189||  0.00|  0.00| 0.00
   0|   0| 256| 98.50|  1.50|  2394||163295480|3811189||  0.00|  0.00| 0.00
   0|   1|   1| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   1| 257| 99.99|  0.01|  2375||163295480|3811189||  0.00|  0.00| 0.00
   0|   2|   2| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   2| 258|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3|   3|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   3| 259| 99.99|  0.01|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   4|   4|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   4| 260|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   5|   5| 99.99|  0.01|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   5| 261|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00
   0|   6|   6|100.00|  0.00|  2401||163295480|3811189||  0.00|  0.00| 0.00
   0|   6| 262|100.00|  0.00|  2435||163295480|3811189||  0.00|  0.00| 0.00

Cc: Thomas Renninger <trenn@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>

Fixes: 7fe2f6399a ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-05-08 10:46:49 -06:00
Hao Zeng e652be0f59 cpupower:Fix resource leaks in sysfs_get_enabled()
The sysfs_get_enabled() opened file processor not closed,
may cause a file handle leak.
Putting error handling and resource cleanup code together
makes the code easy to maintain and read.
Removed the unnecessary else if branch from the original
function, as it should return an error in cases other than '0'.

Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-05-08 08:11:24 -06:00
Thomas Renninger 8c37df3d63 cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
This CPU power monitor shows the power consumption
as exposed by the powercap subsystem, cmp with:
Documentation/power/powercap/powercap.rst

cpupower monitor -m RAPL
    | RAPL
 CPU| pack | core | unco
   0|6853926|967832|442381
   8|6853926|967832|442381
   1|6853926|967832|442381
   9|6853926|967832|442381

Unfortunately RAPL domains cannot be directly mapped to the corresponding
CPU socket/package, core it belongs to.
Not sure this is possible at all with the current data exposed from the
kernel.

Still it can be worthful information for developers trying to optimize
power consumption of workloads or their system in general.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-30 16:48:34 -07:00
Thomas Renninger c2294c1496 cpupower: Introduce powercap intel-rapl library and powercap-info command
Read out powercap zone information via:
cpupower powercap-info
and show the zone hierarchy to the user:

./cpupower powercap-info
Driver: intel-rapl
Powercap domain hierarchy:

Zone: package-0 (enabled)
Power consumption can be monitored in micro Watts

        Zone: core (disabled)
        Power consumption can be monitored in micro Watts

        Zone: uncore (disabled)
        Power consumption can be monitored in micro Watts

        Zone: dram (disabled)
        Power consumption can be monitored in micro Watts

There is a dummy -a option for powercap-info which can/should be used to
show more detailed info later. Like that other args can be added easily
later as well.

A enable/disable option via powercap-set subcommand is also an enhancement
for later.

Also not all RAPL domains are shown. The func walking through RAPL
subdomains is restricted and hardcoded to: "intel-rapl/intel-rapl:0"
On my system above powercap domains map to:
intel-rapl/intel-rapl:0
-> pack (age-0)
intel-rapl/intel-rapl:0/intel-rapl:0:0
-> core
intel-rapl/intel-rapl:0/intel-rapl:0:1
-> uncore

Missing ones on my system are:
intel-rapl-mmio/intel-rapl-mmio:0
-> pack (age-0)

intel-rapl/intel-rapl:1
-> psys

This could get enhanced in:
struct powercap_zone *powercap_init_zones()
and adopted to walk through all intel-rapl zones, but
also to other powercap drivers like dtpm
(Dynamic Thermal Power Management framework),
cmp with: drivers/powercap/dtpm_*

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-30 16:48:28 -07:00
Zurab Kargareteli 4680b734e7 cpupower: Add Georgian translation
Add Georgian language for cpupower

Signed-off-by: Zurab Kargareteli <zuraxt@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-30 16:32:34 -07:00
Saket Kumar Bhaskar 5975e2558e tools/cpupower: Choose base_cpu to display default cpupower details
The default output of cpupower info utils shows unexpected output
when CPU 0 is disabled.

Considering a case where CPU 0 is disabled, output of cpupower idle-info:

Before change:
cpupower idle-info
CPUidle driver: pseries_idle
CPUidle governor: menu
analyzing CPU 0:
 *is offline

After change:
./cpupower idle-info
CPUidle driver: pseries_idle
CPUidle governor: menu
analyzing CPU 50:

Number of idle states: 2
Available idle states: snooze CEDE
snooze:
Flags/Description: snooze
Latency: 0
Usage: 101748
Duration: 2724058
CEDE:
Flags/Description: CEDE
Latency: 12
Usage: 270004
Duration: 283019526849

If -c option is not passed, CPU 0 was chosen as the default chosen CPU to
display details. However when CPU 0 is offline, it results in showing
unexpected output. This commit chooses the base_cpu
instead of CPU 0, hence keeping the output more relevant in all cases.
The base_cpu is the number of CPU on which the calling thread is
currently executing.

Signed-off-by: Saket Kumar Bhaskar <skb99@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-25 10:50:04 -07:00
Thomas Gleixner fa82cce7a6 treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
Based on the normalized pattern:

    licensed under the gpl v2

extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 14:51:36 +02:00
Huang Rui 8382dce5e4 cpupower: Add "perf" option to print AMD P-State information
Add "-c --perf" option in cpupower-frequency-info to get the performance
and frequency values for AMD P-State.

Commit message amended:
Shuah Khan <skhan@linuxfoundation.org>

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-23 17:46:21 -07:00
Huang Rui d8363e2917 cpupower: Add function to print AMD P-State performance capabilities
AMD P-State kernel module is using the fine grain frequency instead of
acpi hardware pstate. So add a function to print performance and
frequency values.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:12 -07:00
Huang Rui 35fdf42d90 cpupower: Move print_speed function into misc helper
The print_speed can be as a common function, and expose it into misc
helper header. Then it can be used on other helper files as well.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:07 -07:00
Huang Rui bf9801baa8 cpupower: Enable boost state support for AMD P-State module
The legacy ACPI hardware P-States function has 3 P-States on ACPI table,
the CPU frequency only can be switched between the 3 P-States. While the
processor supports the boost state, it will have another boost state
that the frequency can be higher than P0 state, and the state can be
decoded by the function of decode_pstates() and read by
amd_pci_get_num_boost_states().

However, the new AMD P-State function is different than legacy ACPI
hardware P-State on AMD processors. That has a finer grain frequency
range between the highest and lowest frequency. And boost frequency is
actually the frequency which is mapped on highest performance ratio. The
similar previous P0 frequency is mapped on nominal performance ratio.
If the highest performance on the processor is higher than nominal
performance, then we think the current processor supports the boost
state. And it uses amd_pstate_boost_init() to initialize boost for AMD
P-State function.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:37:01 -07:00
Huang Rui 33e43f3636 cpupower: Add AMD P-State sysfs definition and access helper
Introduce the marco definitions and access helper function for
AMD P-State sysfs interfaces such as each performance goals and frequency
levels in amd helper file. They will be used to read the sysfs attribute
from AMD P-State cpufreq driver for cpupower utilities.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:55 -07:00
Huang Rui 4a06806e5d cpupower: Introduce ACPI CPPC library
Kernel ACPI subsytem introduced the sysfs attributes for acpi cppc
library in below path:

/sys/devices/system/cpu/cpuX/acpi_cppc/

And these attributes will be used for AMD P-State driver to provide some
performance and frequency values.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:50 -07:00
Huang Rui e3ede97657 cpupower: Add the function to get the sysfs value from specific table
Expose the helper into cpufreq header, then cpufreq driver can use this
function to get the sysfs value if it has any specific sysfs interfaces.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:44 -07:00
Huang Rui 083792f368 cpupower: Initial AMD P-State capability
If kernel starts the AMD P-State module, the cpupower will initial the
capability flag as CPUPOWER_CAP_AMD_PSTATE. And once AMD P-State
capability is set, it won't need to set legacy ACPI relative
capabilities anymore.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:39 -07:00
Huang Rui 46c273a095 cpupower: Add the function to check AMD P-State enabled
The processor with AMD P-State function also supports legacy ACPI
hardware P-States feature as well. Once driver sets AMD P-State eanbled,
the processor will respond the finer grain AMD P-State feature instead of
legacy ACPI P-States. So it introduces the cpupower_amd_pstate_enabled()
to check whether the current kernel enables AMD P-State or AMD CPUFreq
module.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:32 -07:00
Huang Rui c8be60c120 cpupower: Add AMD P-State capability flag
Add AMD P-State capability flag in cpupower to indicate AMD new P-State
kernel module support on Ryzen processors.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-22 18:36:16 -07:00
ozkanonur 101025ff8e tools/power/cpupower/{ToDo => TODO}: Rename the todo file
Renamed the to-do file to 'TODO' instead of 'ToDo' to
comply with the naming standard.

Signed-off-by: ozkanonur <onurozkan.dev@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-24 09:07:11 -07:00
Andreas Rammhold 9d7c485065 tools: cpupower: fix typo in cpupower-idle-set(1) manpage
The tools name was wrong in the SYNTAX section of the manpage it should
read "idle-set" instead of "idle-info".

Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-24 09:07:11 -07:00
Nathan Fontenot 3a3ecfdb60 cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
Remove the family check for accessing the MSR_AMD_HWCR MSR and replace
it with a cpupower cap flag.

This update also allows for the removal of the local cpupower_cpu_info
variable in cpufreq_has_boost_support() since we no longer need it to
check the family.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:45 -07:00
Nathan Fontenot d1abc4e996 cpupower: Remove family arg to decode_pstates()
The decode_pstates() routine no longer uses the CPU family and
the caleed routines (get_cof() and get_did()) can grab the family
from the global cpupower_cpu_info struct. These update removes
passing the family arg to all these routines.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:39 -07:00
Nathan Fontenot 56a85eebeb cpupower: Condense pstate enabled bit checks in decode_pstates()
The enabled bit (bit 63) is common for all families so we can remove
the multiple enabled checks based on family and have a common check
for HW pstate enabled.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:32 -07:00
Nathan Fontenot 23765b82a8 cpupower: Update family checks when decoding HW pstates
The family checks in get_cof() and get_did() need to use the
correct MSR format depending on the family. Add a cpupower
capability for using the pstatedef (family 17h and newer) to
control this instead of direct family checks.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:26 -07:00
Nathan Fontenot 1421de7919 cpupower: Remove unused pscur variable.
The pscur variable is set but not uused, just remove it.

This may have previsously been set to validate the MSR_AMD_PSTATE_STATUS
MSR. With the addition of the CPUPOWER_CAP_AMD_HW_PSTATE cap flag this
is no longer needed since the cpuid bit to enable this cap flag also
validates that the MSR_AMD_PSTATE_STATUS MSR is present.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:21 -07:00
Nathan Fontenot a0255a76bf cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
Add a check in get_cpu_info() for the ability to read frequencies
from hardware and set the CPUPOWER_CAP_AMD_HW_PSTATE cpuid flag.
The cpuid flag is set when CPUID_80000007_EDX[7] is set,
which is all families >= 10h. The check excludes family 14h
because HW pstate reporting was not implemented on family 14h.

This is intended to reduce family checks in the main code paths.

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:15 -07:00
Robert Richter 7a136a8fcd cpupower: Correct macro name for CPB caps flag
The name is Core Performance Boost (CPB) for the cpuid flag. Correct
cpuid caps flag to use this name (instead of CBP).

Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:40:08 -07:00
Nathan Fontenot 629d512d68 cpupower: Update msr_pstate union struct naming
The msr_pstate union struct named fam17h_bits is misleading since
this is the struct to use for all families >= 0x17, not just
for family 0x17. Rename the bits structs to be 'pstate' (for pre
family 17h CPUs) and 'pstatedef' (for CPUs since fam 17h) to align
closer with PPR/BDKG (1) naming.

There are no functional changes as part of this update.

1: AMD Processor Programming Reference (PPR) and BIOS and
Kernel Developer's Guide (BKDG) available at:
http://developer.amd.com/resources/developer-guides-manuals

Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-26 09:39:54 -07:00
Ivan Babrou fb7791e213 cpupower: add Makefile dependencies for install targets
This allows building cpupower in parallel rather than serially.

Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-01-05 11:29:27 -07:00
Linus Torvalds b4ec805464 Power management updates for 5.11-rc1
- Use local_clock() instead of jiffies in the cpufreq statistics to
    improve accuracy (Viresh Kumar).
 
  - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
    drivers (Viresh Kumar).
 
  - Clean up the cpufreq core, the intel_pstate driver and the
    schedutil cpufreq governor (Rafael Wysocki).
 
  - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
    drivers (Yangtao Li, Qinglang Miao).
 
  - Fix cpufreq_online() to return error codes instead of success (0)
    in all cases when it fails (Wang ShaoBo).
 
  - Add mt8167 support to the mediatek cpufreq driver and blacklist
    mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
 
  - Modify the tegra194 cpufreq driver to always return values from
    the frequency table as the current frequency and clean up that
    driver (Sumit Gupta, Jon Hunter).
 
  - Modify the arm_scmi cpufreq driver to allow it to discover the
    power scale present in the performance protocol and provide this
    information to the Energy Model (Lukasz Luba).
 
  - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
    Rohár).
 
  - Clean up the CPPC cpufreq driver (Ionela Voinescu).
 
  - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
    Bergmann).
 
  - Rework the poling interval selection for the polling state in
    cpuidle (Mel Gorman).
 
  - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
    driver (Ulf Hansson).
 
  - Modify the OPP framework to support empty (node-less) OPP tables
    in DT for passing dependency information (Nicola Mazzucato).
 
  - Fix potential lockdep issue in the OPP core and clean up the OPP
    core (Viresh Kumar).
 
  - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
    update its users accordingly (Viresh Kumar).
 
  - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
 
  - Add support for governor feature flags to devfreq, make devfreq
    sysfs file permissions depend on the governor and clean up the
    devfreq core (Chanwoo Choi).
 
  - Clean up the tegra20 devfreq driver and deprecate it to allow
    another driver based on EMC_STAT to be used instead of it (Dmitry
    Osipenko).
 
  - Add interconnect support to the tegra30 devfreq driver, allow it
    to take the interconnect and OPP information from DT and clean it
    up ((Dmitry Osipenko).
 
  - Add interconnect support to the exynos-bus devfreq driver along
    with interconnect properties documentation (Sylwester Nawrocki).
 
  - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
    capping driver (Victor Ding, Kim Phillips).
 
  - Fix handling of overly long constraint names in the powercap
    framework (Lukasz Luba).
 
  - Fix the wakeup configuration handling for bridges in the ACPI
    device power management core (Rafael Wysocki).
 
  - Add support for using an abstract scale for power units in the
    Energy Model (EM) and document it (Lukasz Luba).
 
  - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
    Kondeti).
 
  - Modify the generic power domains (genpd) framwework to support
    suspend-to-idle (Ulf Hansson).
 
  - Fix creation of debugfs nodes in genpd (Thierry Strudel).
 
  - Clean up genpd (Lina Iyer).
 
  - Clean up the core system-wide suspend code and make it print
    driver flags for devices with debug enabled (Alex Shi, Patrice
    Chotard, Chen Yu).
 
  - Modify the ACPI system reboot code to make it prepare for system
    power off to avoid confusing the platform firmware (Kai-Heng Feng).
 
  - Update the pm-graph (multiple changes, mostly usability-related)
    and cpupower (online and offline CPU information support) PM
    utilities (Todd Brandt, Brahadambal Srinivasan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/Y8mcSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxjY4QAKsNFJeEtjGCxq7MxQIML3QLAsdJM9of
 9kkY9skMEw4v1TRmyy7sW9jZW2pLSRcLJwWRKWu4143qUS3YUp2DQ0lqX4WyXoWu
 BhnkhkMUl6iCeBO8CWnt8zsTuqSa20A13sL9LyqN1+7OZKHD8StbT4hKjBncdNNN
 4aDj+1uAPyOgj2iCUZuHQ8DtpBvOLjgTh367vbhbufjeJ//8/9+R7s4Xzrj7wtmv
 JlE0LDgvge9QeGTpjhxQJzn0q2/H5fg9jbmjPXUfbHJNuyKhrqnmjGyrN5m256JI
 8DqGqQtJpmFp7Ihrur3uKTk3gWO05YwJ1FdeEooAKEjEMObm5xuYhKVRoDhmlJAu
 G6ui+OAUvNR0FffJtbzvWe/pLovLGOEOHdvTrZxUF8Abo6br3untTm8rKTi1fhaF
 wWndSMw0apGsPzCx5T+bE7AbJz2QHFpLhaVAutenuCzNI8xoMlxNKEzsaVz/+FqL
 Pq/PdFaM4vNlMbv7hkb/fujkCs/v3EcX2ihzvt7I2o8dBS0D1X8A4mnuWJmiGslw
 1ftbJ6M9XacwkPBTHPgeXxJh2C1yxxe5VQ9Z5fWWi7sPOUeJnUwxKaluv+coFndQ
 sO6JxsPQ4hQihg8yOxLEkL6Wn68sZlmp+u2Oj+TPFAsAGANIA8rJlBPo1ppJWvdQ
 j1OCIc/qzwpH
 =BVdX
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update cpufreq (core and drivers), cpuidle (polling state
  implementation and the PSCI driver), the OPP (operating performance
  points) framework, devfreq (core and drivers), the power capping RAPL
  (Running Average Power Limit) driver, the Energy Model support, the
  generic power domains (genpd) framework, the ACPI device power
  management, the core system-wide suspend code and power management
  utilities.

  Specifics:

   - Use local_clock() instead of jiffies in the cpufreq statistics to
     improve accuracy (Viresh Kumar).

   - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
     drivers (Viresh Kumar).

   - Clean up the cpufreq core, the intel_pstate driver and the
     schedutil cpufreq governor (Rafael Wysocki).

   - Fix up error code paths in the sti-cpufreq and mediatek cpufreq
     drivers (Yangtao Li, Qinglang Miao).

   - Fix cpufreq_online() to return error codes instead of success (0)
     in all cases when it fails (Wang ShaoBo).

   - Add mt8167 support to the mediatek cpufreq driver and blacklist
     mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).

   - Modify the tegra194 cpufreq driver to always return values from the
     frequency table as the current frequency and clean up that driver
     (Sumit Gupta, Jon Hunter).

   - Modify the arm_scmi cpufreq driver to allow it to discover the
     power scale present in the performance protocol and provide this
     information to the Energy Model (Lukasz Luba).

   - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
     Rohár).

   - Clean up the CPPC cpufreq driver (Ionela Voinescu).

   - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
     Bergmann).

   - Rework the poling interval selection for the polling state in
     cpuidle (Mel Gorman).

   - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
     (Ulf Hansson).

   - Modify the OPP framework to support empty (node-less) OPP tables in
     DT for passing dependency information (Nicola Mazzucato).

   - Fix potential lockdep issue in the OPP core and clean up the OPP
     core (Viresh Kumar).

   - Modify dev_pm_opp_put_regulators() to accept a NULL argument and
     update its users accordingly (Viresh Kumar).

   - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).

   - Add support for governor feature flags to devfreq, make devfreq
     sysfs file permissions depend on the governor and clean up the
     devfreq core (Chanwoo Choi).

   - Clean up the tegra20 devfreq driver and deprecate it to allow
     another driver based on EMC_STAT to be used instead of it (Dmitry
     Osipenko).

   - Add interconnect support to the tegra30 devfreq driver, allow it to
     take the interconnect and OPP information from DT and clean it up
     (Dmitry Osipenko).

   - Add interconnect support to the exynos-bus devfreq driver along
     with interconnect properties documentation (Sylwester Nawrocki).

   - Add suport for AMD Fam17h and Fam19h processors to the RAPL power
     capping driver (Victor Ding, Kim Phillips).

   - Fix handling of overly long constraint names in the powercap
     framework (Lukasz Luba).

   - Fix the wakeup configuration handling for bridges in the ACPI
     device power management core (Rafael Wysocki).

   - Add support for using an abstract scale for power units in the
     Energy Model (EM) and document it (Lukasz Luba).

   - Add em_cpu_energy() micro-optimization to the EM (Pavankumar
     Kondeti).

   - Modify the generic power domains (genpd) framwework to support
     suspend-to-idle (Ulf Hansson).

   - Fix creation of debugfs nodes in genpd (Thierry Strudel).

   - Clean up genpd (Lina Iyer).

   - Clean up the core system-wide suspend code and make it print driver
     flags for devices with debug enabled (Alex Shi, Patrice Chotard,
     Chen Yu).

   - Modify the ACPI system reboot code to make it prepare for system
     power off to avoid confusing the platform firmware (Kai-Heng Feng).

   - Update the pm-graph (multiple changes, mostly usability-related)
     and cpupower (online and offline CPU information support) PM
     utilities (Todd Brandt, Brahadambal Srinivasan)"

* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
  cpufreq: Fix cpufreq_online() return value on errors
  cpufreq: Fix up several kerneldoc comments
  cpufreq: stats: Use local_clock() instead of jiffies
  cpufreq: schedutil: Simplify sugov_update_next_freq()
  cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
  PM: domains: create debugfs nodes when adding power domains
  opp: of: Allow empty opp-table with opp-shared
  dt-bindings: opp: Allow empty OPP tables
  media: venus: dev_pm_opp_put_*() accepts NULL argument
  drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
  drm/lima: dev_pm_opp_put_*() accepts NULL argument
  PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
  cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
  opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
  opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
  cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
  opp: Reduce the size of critical section in _opp_kref_release()
  PM / EM: Micro optimization in em_cpu_energy
  cpufreq: arm_scmi: Discover the power scale in performance protocol
  ...
2020-12-15 16:30:31 -08:00
Borislav Petkov 8113ab20e8 tools/power/cpupower: Read energy_perf_bias from sysfs
... instead of poking at the MSR. For that, move the accessor functions
to misc.c and add a sysfs-writing function too.

There should be no functional changes resulting from this.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Renninger <trenn@suse.com>
Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
2020-11-16 17:42:12 +01:00
Brahadambal Srinivasan 748f0d7008 cpupower: Provide online and offline CPU information
When a user tries to modify cpuidle or cpufreq properties on offline
CPUs, the tool returns success (exit status 0) but also does not provide
any warning message regarding offline cpus that may have been specified
but left unchanged. In case of all or a few CPUs being offline, it can be
difficult to keep track of which CPUs didn't get the new frequency or idle
state set. Silent failures are difficult to keep track of when there are a
huge number of CPUs on which the action is performed.

This patch adds helper functions to find both online and offline CPUs and
print them out accordingly.

We use these helper functions in cpuidle-set and cpufreq-set to print an
additional message if the user attempts to modify offline cpus.

Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-10-26 13:36:24 -06:00
Linus Torvalds 41f762a15a More power management updates for 5.10-rc1
- Move the AVS drivers to new platform-specific locations and get
    rid of the drivers/power/avs directory (Ulf Hansson).
 
  - Add on/off notifiers and idle state accounting support to the
    generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
 
  - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
 
  - Make intel_idle disregard ACPI _CST if it cannot use the data
    returned by that method (Mel Gorman).
 
  - Modify intel_pstate to avoid leaving useless sysfs directory
    structure behind if it cannot be registered (Chen Yu).
 
  - Fix domain detection in the RAPL power capping driver and prevent
    it from failing to enumerate the Psys RAPL domain (Zhang Rui).
 
  - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
    later AMD chips (Wei Huang).
 
  - Update the driver assumptions comment in intel_idle and fix a
    kerneldoc comment in the runtime PM framework (Alexander Monakov,
    Bean Huo).
 
  - Avoid unnecessary resets of the cached frequency in the schedutil
    cpufreq governor to reduce overhead (Wei Wang).
 
  - Clean up the cpufreq core a bit (Viresh Kumar).
 
  - Make assorted minor janitorial changes (Daniel Lezcano, Geert
    Uytterhoeven, Hubert Jasudowicz, Tom Rix).
 
  - Clean up and optimize the cpupower utility somewhat (Colin Ian
    King, Martin Kaistra).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl+TD4gSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx3AgP/0Fpi50+Kggr7pIXKElwg7ECJA0nOLT6
 gp4Vc/J/3r6zqK0ANDgCRlEMckAT61ukll+eU+BlavBrI4ZYj/Homi0+u53t1GjM
 AOwj1SmQgSBcBavWsBOc8+12X6wYLzyQbyWc53oYH5os537n8s7zkSZuSBcGFUgb
 wWF4xOeuW/ETsxAzEYmY7LvtBeEmo3UjV0fZPPbo/ro5EHDaOpvO/4EUDjCQxR6b
 CvyjgLlxuAOFWG/B5lVTCx7S6MmBjHXUIFUizt+TA6YjyGd0mG0i0f7mgzs6hqUD
 gzERDSlehBC3zPh5O35HNGUG8ulvDi9+ugxuckFHu/j4wEeZswp8AuIpdLI6Mcnc
 LDb+LTeypAB5d1fzHeSziv8AL08cUAS6QT+q96whYibQs6WA1mE9yXECyg6ZGsLt
 1KPAc8KD4ojwjo9vtk9VU0ZaUcVBMnqyK+GK929l0nXohw2Fae6X/NlpQ0D7joZA
 NM+dWMXpHy6tuVOgdUmrmN+P6vWd8ApWBeufkUFsCzrh3zG57yVaLl2SAjEtpKh0
 Emr/kJ8Ox8cf++6mGKseR2ZbkGn0Tz2GD5l3hIAGnIv9Nda3YgCc6RyV7U9se7OW
 2xnQvrgXqQKyjjziptVFqDotcC/KXFACr3YZX6GlW675NOMXSGk1ZYI3FbrsM8yd
 0/zq7PyYmb0D
 =TFKg
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "First of all, the adaptive voltage scaling (AVS) drivers go to new
  platform-specific locations as planned (this part was reported to have
  merge conflicts against the new arm-soc updates in linux-next).

  In addition to that, there are some fixes (intel_idle, intel_pstate,
  RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
  accounting support to the generic power domains (genpd) code and some
  janitorial changes all over.

  Specifics:

   - Move the AVS drivers to new platform-specific locations and get rid
     of the drivers/power/avs directory (Ulf Hansson).

   - Add on/off notifiers and idle state accounting support to the
     generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).

   - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).

   - Make intel_idle disregard ACPI _CST if it cannot use the data
     returned by that method (Mel Gorman).

   - Modify intel_pstate to avoid leaving useless sysfs directory
     structure behind if it cannot be registered (Chen Yu).

   - Fix domain detection in the RAPL power capping driver and prevent
     it from failing to enumerate the Psys RAPL domain (Zhang Rui).

   - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
     later AMD chips (Wei Huang).

   - Update the driver assumptions comment in intel_idle and fix a
     kerneldoc comment in the runtime PM framework (Alexander Monakov,
     Bean Huo).

   - Avoid unnecessary resets of the cached frequency in the schedutil
     cpufreq governor to reduce overhead (Wei Wang).

   - Clean up the cpufreq core a bit (Viresh Kumar).

   - Make assorted minor janitorial changes (Daniel Lezcano, Geert
     Uytterhoeven, Hubert Jasudowicz, Tom Rix).

   - Clean up and optimize the cpupower utility somewhat (Colin Ian
     King, Martin Kaistra)"

* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  PM: sleep: remove unreachable break
  PM: AVS: Drop the avs directory and the corresponding Kconfig
  PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
  PM: runtime: Fix typo in pm_runtime_set_active() helper comment
  PM: domains: Fix build error for genpd notifiers
  powercap: Fix typo in Kconfig "Plance" -> "Plane"
  cpufreq: schedutil: restore cached freq when next_f is not changed
  acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
  PM: AVS: smartreflex Move driver to soc specific drivers
  PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
  PM: domains: enable domain idle state accounting
  PM: domains: Add curly braces to delimit comment + statement block
  PM: domains: Add support for PM domain on/off notifiers for genpd
  powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
  powercap/intel_rapl: Fix domain detection
  intel_idle: Ignore _CST if control cannot be taken from the platform
  cpuidle: Remove pointless stub
  intel_idle: mention assumption that WBINVD is not needed
  MAINTAINERS: Add section for cpuidle-psci PM domain
  cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
  ...
2020-10-23 16:27:03 -07:00
Joe Perches aa803771a8 tools: Avoid comma separated statements
Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-10-02 10:36:36 -06:00
Martin Kaistra 527b7779e5 cpupower: speed up generating git version string
The variable VERSION is expanded for every use of CFLAGS. This causes
"git describe" to get called multiple times on the kernel tree, which
can be quite slow.

The git revision does not change during build, so we can use simple
variable expansion to set VERSION.

Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-08-20 13:04:47 -06:00
Colin Ian King d1876f3596 cpupowerutils: fix spelling mistake "dependant" -> "dependent"
There is a spelling mistake in a message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-08-20 11:19:23 -06:00
Linus Torvalds 2baa85d692 ACPI updates for 5.9-rc1
- Eliminate significant AML processing overhead related to using
    operation regions in system memory by reworking the management
    of memory mappings in the ACPI code to defer unmap operations
    (to do them outside of the ACPICA locks, among other things) and
    making the memory operation reagion handler avoid releasing memory
    mappings created by it too early (Rafael Wysocki).
 
  - Update the ACPICA code in the kernel to upstream revision
    20200717:
 
    * Prevent operation region reference counts from overflowing in
      some cases (Erik Kaneda).
 
    * Replace one-element array with flexible-array (Gustavo A. R.
      Silva).
 
  - Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
 
  - Drop last bits of the ACPI procfs interface (Thomas Renninger).
 
  - Drop some redundant checks from the code parsing ACPI tables
    related to NUMA (Hanjun Guo).
 
  - Avoid redundant object evaluation in the ACPI device properties
    handling code (Heikki Krogerus).
 
  - Avoid unecessary memory overhead related to storing the signatures
    of the ACPI tables recognized by the kernel (Ard Biesheuvel).
 
  - Add missing newline characters when printing module parameter
    values in some places (Xiongfeng Wang).
 
  - Update the link to the ACPI specifications in some places (Tiezhu
    Yang).
 
  - Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
    Silva).
 
  - Drop redundant variable initialization from the APEI code (Colin
    Ian King).
 
  - Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
 
  - Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
    Klimov).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl8oO8gSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx2nUP/iSRAW0DK4PYDNLDV1Q+y5RrQw44iMDf
 yfLQu3agardM1KGtPuYw5zmU0UoEYtW8s2r027bxw9Hvn0IzBh5TiDvcVjMEnbVC
 +6m/fWg3EStfZ9w2dxDzXDMIk/oiEZsjtWSRaDTfAIH2jc/xVcSXDojlMgBPQDu5
 hIITjMbGGx783o4PNCYbIZy1ReJgd8MNQ+Xp3MCpTgbFgHMHKBOJ6B/nS8aTfilO
 eE5JvzhXED7qITaXYWxI9OZpRTPTNQ3eaEPbWvnw4KJ5boMfyREMGdTBipXO+kSA
 SwKhFysYEUAZM7Ffq0eTnWSCU7VWogAsTauIgs4+d9z8VrGhWi5+b6N/E/uwTKtj
 HF98xtk+Loe8V24LwN0snvv51O7P5nAH47QxwIBvQssfR8ZSgdwHtUQcckybAJhx
 LLmPtJrM8ZAefc9H4o0eVqumjoh1amGKC9dTY0g1j0UIE0y3ZIFHTvDNvhpTzgBk
 5uUHHEiolGNWHVrs1LIMOEejqx62m+EjVc9b8XUdJqHoboTccMM73DRk/00meP/7
 br/VfMI0aTjPLssvSC/ZSlTZt+ddrBm+cXw9eqruDQwdQaqxpJu+D3odjdaYSjpg
 luiYQrQdoDmIDh4UNuJbvG/Hub3CLzvJSqGWLExNbX7nWXxH4HIx/8PcNtVkKZRV
 qBXotIc+i4VD
 =Nn2Q
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These eliminate significant AML processing overhead related to using
  operation regions in system memory, update the ACPICA code in the
  kernel to upstream revision 20200717 (including a fix to prevent
  operation region reference counts from overflowing in some cases),
  remove the last bits of the (long deprecated) ACPI procfs interface
  and do some assorted cleanups.

  Specifics:

   - Eliminate significant AML processing overhead related to using
     operation regions in system memory by reworking the management of
     memory mappings in the ACPI code to defer unmap operations (to do
     them outside of the ACPICA locks, among other things) and making
     the memory operation reagion handler avoid releasing memory
     mappings created by it too early (Rafael Wysocki).

   - Update the ACPICA code in the kernel to upstream revision 20200717:

       * Prevent operation region reference counts from overflowing in
         some cases (Erik Kaneda).

       * Replace one-element array with flexible-array (Gustavo A. R.
         Silva).

   - Fix ACPI PCI hotplug reference counting (Rafael Wysocki).

   - Drop last bits of the ACPI procfs interface (Thomas Renninger).

   - Drop some redundant checks from the code parsing ACPI tables
     related to NUMA (Hanjun Guo).

   - Avoid redundant object evaluation in the ACPI device properties
     handling code (Heikki Krogerus).

   - Avoid unecessary memory overhead related to storing the signatures
     of the ACPI tables recognized by the kernel (Ard Biesheuvel).

   - Add missing newline characters when printing module parameter
     values in some places (Xiongfeng Wang).

   - Update the link to the ACPI specifications in some places (Tiezhu
     Yang).

   - Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
     Silva).

   - Drop redundant variable initialization from the APEI code (Colin
     Ian King).

   - Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).

   - Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
     Klimov)"

* tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  ACPI: APEI: remove redundant assignment to variable rc
  ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
  ACPI: NUMA: Remove the useless sub table pointer check
  ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
  ACPICA: Update version to 20200717
  ACPICA: Do not increment operation_region reference counts for field units
  ACPICA: Replace one-element array with flexible-array
  ACPI: Replace HTTP links with HTTPS ones
  ACPI: Use valid link to the ACPI specification
  ACPI: OSL: Clean up the removal of unused memory mappings
  ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
  ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
  ACPICA: Preserve memory opregion mappings
  ACPI: OSL: Implement deferred unmapping of ACPI memory
  ACPI: Use fallthrough pseudo-keyword
  PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
  ACPI: tables: avoid relocations for table signature array
  ACPI: PAD: Eliminate usage of uninitialized_var() macro
  ACPI: sysfs: add newlines when printing module parameters
  ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
  ...
2020-08-03 20:37:22 -07:00
Tiezhu Yang 0585c1c06a ACPI: Use valid link to the ACPI specification
Currently, acpi.info is an invalid link to access ACPI specification,
the new valid link is https://uefi.org/specifications.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27 14:11:22 +02:00
Alexander A. Klimov fa0866a1d1 cpupower: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-17 11:58:04 -06:00
Shuah Khan cbf2527093 cpupower: Fix NULL but dereferenced coccicheck errors
Fix NULL but dereferenced coccicheck errors found by:

make coccicheck MODE=report M=tools/power/cpupower

tools/power/cpupower/lib/cpufreq.c:384:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:440:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:308:19-23: ERROR: first is NULL but dereferenced.
tools/power/cpupower/lib/cpufreq.c:753:19-23: ERROR: first is NULL but dereferenced.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06 16:11:04 -06:00
Shuah Khan 8e022709c4 cpupower: Fix comparing pointer to 0 coccicheck warns
Fix cocciccheck wanrns found by:
make coccicheck MODE=report M=tools/power/cpupower/

tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0, suggest !E
tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0
tools/power/cpupower/utils/helpers/bitmask.c:43:12-13: WARNING comparing pointer to 0

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06 16:10:40 -06:00
Zou Wei 7b0bf99b9e cpupower: Remove unneeded semicolon
Fixes coccicheck warnings:

tools/power/cpupower/utils/cpupower-info.c:65:2-3: Unneeded semicolon
tools/power/cpupower/utils/cpupower-set.c:75:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c:120:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:175:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:56:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:75:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c:82:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/nhm_idle.c:94:2-3: Unneeded semicolon
tools/power/cpupower/utils/idle_monitor/snb_idle.c:80:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-08 10:13:26 -06:00