Like we do for encoder let's make the plane->get_hw_state() return
the pipe to which the plane is currently attached. We don't currently
allow planes to move between the pipes, but perhaps one day we will.
In either case this makes the code more uniform and perhaps makes
intel_plane_mapping_ok() slightly more clear.
Note that for i965 and g4x planes A and B still have pipe select bits
but they're hardwired to pipe A and B respectively. This means we can
safely interpret those bits just like on gen2/3. This allows the
same readout code work for plane C (which can still be assigned
to eiter pipe on i965) should we ever expose it.
g4x no longer allows moving the cursor planes between the pipes,
but the pipe select bits can still be set in the register. Thus
we have to ignore those bits. OTOH i965 still allows the cursors
to move between pipes thus we have to trust the bits there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
On resume, we have to rewrite all the PDE entries for gen7 ppgtts. If we
switch on full-ppgtt, there is then one address space with no PDE, the
GGTT. Currently under aliasing-ppgtt, the GGTT address space does have
an associated ppgtt and so the restore works just fine. We would have a
similar problem if we tried disabling aliasing-ppgtt
(i915.enable_ppgtt=0). So skip the empty ppgtt, as being non-existent it
doesn't need restoring.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180601093554.13083-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we store the intel_context on the request (rq->hw_context), we can
simply compare that against the local intel_context for the
i915->kernel_context rather than using the rq->gem_context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180601094002.13329-1-chris@chris-wilson.co.uk
Now that we always switch to the kernel context upon idling, we can
make that assertion.
References: 4dfacb0bcb ("drm/i915: Switch to kernel context before idling at runtime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180531224057.6036-1-chris@chris-wilson.co.uk
During testing we encounter a conflict between SUSPEND_TEST_DEVICES and
disabling reset (gem_eio/suspend). This results in the device continuing
on without being reset, but since it has gone through HW sanitization to
account for the suspend/resume cycle, we have to assume the device has
been reset to its defaults. A simple way around this is to skip the
sanitize phase for SUSPEND_TEST_DEVICES by moving it to suspend-late.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180531082246.9763-4-chris@chris-wilson.co.uk
During suspend we want to flush out all active contexts and their
rendering. To do so we queue a request from the kernel's context, once
we know that request is done, we know the GPU is completely idle. To
speed up that switch bump the GPU clocks.
Switching to the kernel context prior to idling is also used to enforce
a barrier before changing OA properties, and when evicting active
rendering from the global GTT. All cases where we do want to
race-to-idle.
v2: Limit the boosting to only the switch before suspend.
v3: Limit it to the wait-for-idle on suspend.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com> #v1
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180531082246.9763-2-chris@chris-wilson.co.uk
We can reduce our exposure to random neutrinos by resting on the kernel
context having flushed out the user contexts to system memory and
beyond. The corollary is that we then we require two passes through the
idle handler to go to sleep, which on a truly idle system involves an
extra pass through the slow and irregular retire work handler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180531082246.9763-1-chris@chris-wilson.co.uk
SOFT_SCRATCH(15) is used by GuC for sending MMIO GuC events to host and
those events are now handled by intel_guc_to_host_event_handler_mmio().
We should not try to read it on MMIO action error as 1) we may be using
different set of registers for GuC MMIO communication, and 2) GuC may
use CTB mechanism for sending events to host.
While here, upgrade error message to DRM_ERROR.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528171618.10436-1-michal.wajdeczko@intel.com
Normally this is called on a modeset, but the call is missing when
we inherit the mode from the BIOS, so make sure it's called somewhere
in hardware readout.
Changes since v1:
- Unconditionally call intel_opregion_notify_encoder. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516085038.36785-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Since we use i915_gem_find_active_request() from inside
intel_engine_dump() and may call that at any time, we do not guarantee
that the engine is paused nor that the signal kthreads and irq handler
are suspended, so we cannot assert that the breadcrumb doesn't advance
and that the irq hasn't happened on another CPU signaling the request we
believe to be idle.
The second assert removed (that request->engine == engine) remains
valid, but is now more rigorously checked during retirement.
Fixes: f636edb214 ("drm/i915: Make i915_engine_info pretty printer to standalone")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180529132922.6831-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
DPCD 2009h "Synchronization latency in sink" has bits that tell us the
maximum number of frames sink can take to resynchronize to source timing
when exiting PSR. More importantly, as per eDP 1.4b, this is the "Minimum
number of frames following PSR exit that the Source device needs to
wait for PSR entry."
We currently use this value only to setup the number frames to wait before
PSR2 selective update. But, based on the above description it makes more
sense to use this to configure idle frames for both PSR1 and and PSR2. This
will ensure we wait the required number of frames before
activation whether it is PSR1 or PSR2.
The minimum number of idle frames remains 6, while allowing sink
synchronization latency and VBT to increase this value.
This also solves the flip-flop between sink and source frames that I
noticed on my Thinkpad X260 during PSR exit. This specific panel has a
value of 8h, which according to the spec means the "Source device must
wait for more than eight active frames after PSR exit before initiating PSR
entry. (In this case, should be provided by the panel supplier.)" VBT
however has a value of 0.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525033047.7596-1-dhinakaran.pandiyan@intel.com
Enables blend optimization for floating point RTs
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
References: HSDES#1406393558
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527285939-20113-5-git-send-email-oscar.mateo@intel.com
Disable blend embellishment in RCC.
Also, some other registers style fixed in passing.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Fixed in B0
- Mentioned style fixes in commit message
References: HSDES#2006665173
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527285939-20113-4-git-send-email-oscar.mateo@intel.com
Redirects the state cache to the CS Command buffer section for
performance reasons.
v2: Rebased
v3: Rebased on top of the WA refactoring
v3: Added References (Mika)
References: HSDES#1604325460
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527285939-20113-3-git-send-email-oscar.mateo@intel.com
Revert to the legacy implementation.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Rebased
- Renamed to Wa_2006611047
- A0 and B0 only
v4:
- Add spaces around '<<' (and fix the surrounding code as well)
- Mark the WA as pre-prod
v5: Rebased on top of the WA refactoring
v6: Added References (Mika)
v7: Fixed in B0
References: HSDES#2006611047
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1527285939-20113-2-git-send-email-oscar.mateo@intel.com
Some functions already use i915 name instead of dev_priv.
Let's rename this param in all remaining functions, except
those that still use legacy macros.
v2: don't forget about function descriptions (Sagar)
v3: rebased
v4: rebased
v5: rebased, pulled out from the series
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525121858.53928-1-michal.wajdeczko@intel.com
Let's suppress the underruns around every modeset sequence instead
of trying to avoid it. Planes are disabled at this point anyway so
we don't really gain anything from keeping the underrun reporting
enabled. Also for PCH ports we already suppress all underruns here
anyway so trying avoid it for the CPU eDP doesn't seem all that
important.
Maybe this gets rid of some lingering spurious underruns?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524190406.2973-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
VBT seems to have some bits to tell us whether the internal LVDS port
has something hooked up. In theory one might expect the VBT to not have
a child device for the LVDS port if there's no panel hooked up, but
in practice many VBTs still add the child device. The "LVDS config" bits
seem more reliable though, so let's check those.
So far we've used the "LVDS config" bits to check for eDP support on
ILK+, and disable the internal LVDS when the value is 3. That value
is actually documented as "Both internal LVDS and SDVO LVDS", but in
practice it looks to mean "eDP" on all the ilk+ VBTs I've seen. So let's
keep that interpretation, but for pre-ILK we will consider the value
3 to also indicate the presence of the internal LVDS.
Currently we have 25 DMI matches for the "no internal LVDS" quirk. In an
effort to reduce that let's toss in a WARN when the DMI match and VBT
both tell us that the internal LVDS is not present. The hope is that
people will report a bug, and then we can just nuke the corresponding
entry from the DMI quirk list. Credits to Jani for this idea.
v2: Split the basic int_lvds_support thing to a separate patch (Jani)
v3: Rebase
v4: Limit this to VBT version >= 134
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518150138.18361-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
My ILK seems to generate a spurious PCH underrun with most interlaced
HDMI modes. Add a second vblank wait to avoid it.
We have seen some spurious PCH underruns still in CI as well, some
of which seem to be progressive DP. The logs also point towards some
spurious underrins with progressive HDMI on SNB. While I don't have
a solid explanation for those let's try to kill all the birds with one
stone and always do the double wait.
Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106387
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524190406.2973-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
We can always figure out which pipe is affected by the panel power
sequencer lockout mechanism. So no need for the pipe A fallback
anymore. The only case we may have to worry about is an invalid
port select in the power sequencer, but INVALID_PIPE is just fine
in that case. We'll get the WARN about the bogus pps port select
anyway.
Cc: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523145718.22932-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In order to prepare the GPU for sleeping, we may want to submit commands
to it. This is a complicated process that may even require some swapping
in from shmemfs, if the GPU was in the wrong state. As such, we need to
do this preparation step synchronously before the rest of the system has
started to turn off (e.g. swapin fails if scsi is suspended).
Fortunately, we are provided with a such a hook, pm_ops.prepare().
v2: Compile cleanup
v3: Fewer asserts, fewer problems?
v4: Ville pointed out that in some circumstances (such as switching off
the overlay) the display code may issue a GPU request. This is
unexpected, and will result in us going to sleep with us believing the
GPU is still awake (though all user work has been saved). Add a comment
to remind our future selves of what trouble brews.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106640
Testcase: igt/drv_suspend after igt/gem_tiled_swapping
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525092629.1456-1-chris@chris-wilson.co.uk
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
After a reset, we will ensure that there is at least one request
submitted to HW to ensure that a context is loaded for powersaving.
Let's wait for this submission via a tasklet to complete before we drop
our forcewake, ensuring the system is ready for rc6 before we let it
possibly sleep.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522101937.7738-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We were not very carefully checking to see if an older request on the
engine was an earlier switch-to-kernel-context before deciding to emit a
new switch. The end result would be that we could get into a permanent
loop of trying to emit a new request to perform the switch simply to
flush the existing switch.
What we need is a means of tracking the completion of each timeline
versus the kernel context, that is to detect if a more recent request
has been submitted that would result in a switch away from the kernel
context. To realise this, we need only to look in our syncmap on the
kernel context and check that we have synchronized against all active
rings.
v2: Since all ringbuffer clients currently share the same timeline, we do
have to use the gem_context to distinguish clients.
As a bonus, include all the tracing used to debug the death inside
suspend.
v3: Test, test, test. Construct a selftest to exercise and assert the
expected behaviour that multiple switch-to-contexts do not emit
redundant requests.
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180524081135.15278-1-chris@chris-wilson.co.uk
While touching the code around this, I noticed that absence of ALPM
capability does not stop us from enabling PSR2. But, the spec
unambiguously states that ALPM is required for PSR2 and so does this
commit that introduced this code
drm/i915/psr: enable ALPM for psr2
As per edp1.4 spec , alpm is required for psr2 operation as it's
used for all psr2 main link power down management and alpm enable
bit must be set for psr2 operation.
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-6-dhinakaran.pandiyan@intel.com
Noticed that we assume the best case of 0 latency when the DPCD read
fails, reasonable pessimism is safer.
eDP spec does say that if latency is greater than 8, the panel
supplier needs to provide it. I didn't see anything specific in the VBT
for this, so let's go with 8 frames as a fallback.
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-5-dhinakaran.pandiyan@intel.com
By moving the check from psr_compute_config() to psr_init_dpcd(), we get
to set the dev_priv->psr.sink_support flag only when the panel is
capable of changing power state. An additional benefit is that the check
will be performed only at init time instead of every atomic_check.
This should change the psr_basic IGT failures on HSW to skips.
v2: Return early when SET_POWER_CAPABLE bit is 0 (Jose)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106217
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106346
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-2-dhinakaran.pandiyan@intel.com
Ville noticed that we are unncessarily reading DPCD's after knowing
panel did not support PSR. Looks like this check that was present
earlier got removed unintentionally, let's put it back.
While we do this, add the PSR version number in the debug print.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tarun Vyas <tarun.vyas@intel.com>
Reviewed-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511195145.3829-1-dhinakaran.pandiyan@intel.com
PSR hardware and hence the driver code for VLV and CHV deviates a lot from
their DDI counterparts. While the feature has been disabled for a long time
now, retaining support for these platforms is a maintenance burden. There
have been multiple refactoring commits to just keep the existing code for
these platforms in line with the rest. There are known issues that need to
be fixed to enable PSR on these platforms, and there is no PSR capable
platform in CI to ensure the code does not break again if we get around to
fixing the existing issues. On account of all these reasons, let's nuke
this code for now and bring it back if a need arises in the future.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511230059.19387-1-dhinakaran.pandiyan@intel.com
For psr block #9, the vbt description has moved to options [0-3] for
TP1,TP2,TP3 Wakeup time from decimal value without any change to vbt
structure. Since spec does not mention from which VBT version this
change was added to vbt.bsf file, we cannot depend on bdb->version check
to change for all the platforms.
There is RCR inplace for GOP team to provide the version number
to make generic change. Since Kabylake with bdb version 209 is having this
change, limiting this change to gen9_bc and version 209+ to unblock google.
Tested on skl(bdb version 203,without options) and
kabylake(bdb version 209,212) having new options.
bspec 20131
v2: (Jani and Rodrigo)
move the 165 version check to intel_bios.c
v3: Jani
Move the abstraction to intel_bios.
v4: Jani
Rename tp*_wakeup_time to have "us" suffix.
For values outside range[0-3],default to max 2500us.
Old decimal value was wake up time in multiples of 100us.
v5: Jani and Rodrigo
Handle option 2 in default condition.
Print oustide range value.
For negetive values default to 2500us.
v6: Jani
Handle default first and then fall through for case 2.
v7: Rodrigo
Apply this change for IS_GEN9_BC and vbt version > 209
v8: Puthik
Add new function vbt_psr_to_us.
v9: Jani
Change to v7 version as it's more readable.
DK
add comment /*fall through*/ after case2.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526981243-2745-1-git-send-email-vathsala.nagaraju@intel.com
L3Bank could be fused off in hardware for debug purpose, and it
is possible that subslice is enabled while its corresponding L3Bank pairs
are disabled. In such case, if MCR packet control register(0xFDC) is
programed to point to a disabled bank pair, a MMIO read into L3Bank range
will return 0 instead of correct values.
However, this is not going to be the case in any production silicon.
Therefore, we only check at initialization and issue a warning should
this really happen.
References: HSDES#1405586840
v2:
- use fls instead of find_last_bit (Chris)
- use is_power_of_2() instead of counting bit set (Chris)
v3:
- rebase on latest tip
v5:
- Added references (Mika)
- Move local variable into scope where they are used (Ursulin)
- use a new local variable to reduce long line of code (Ursulin)
v6:
- Some coding style and use more local variables for clearer
logic (Ursulin)
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Yunwei Zhang <yunwei.zhang@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526683285-24861-1-git-send-email-yunwei.zhang@intel.com
WaProgramMgsrForCorrectSliceSpecificMmioReads applies for Icelake as
well.
References: HSD#1405586840, BSID#0575
v2:
- GEN11 mask is different from its predecessors. (Oscar)
- Better separate GEN10 and GEN11. (Oscar)
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Yunwei Zhang <yunwei.zhang@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526683232-24753-1-git-send-email-yunwei.zhang@intel.com
WaProgramMgsrForCorrectSliceSpecificMmioReads dictate that before any MMIO
read into Slice/Subslice specific registers, MCR packet control
register(0xFDC) needs to be programmed to point to any enabled
slice/subslice pair. Otherwise, incorrect value will be returned.
However, that means each subsequent MMIO read will be forwarded to a
specific slice/subslice combination as read is unicast. This is OK since
slice/subslice specific register values are consistent in almost all cases
across slice/subslice. There are rare occasions such as INSTDONE that this
value will be dependent on slice/subslice combo, in such cases, we need to
program 0xFDC and recover this after. This is already covered by
read_subslice_reg.
Also, 0xFDC will lose its information after TDR/engine reset/power state
change.
References: HSD#1405586840, BSID#0575
v2:
- use fls() instead of find_last_bit() (Chris)
- added INTEL_SSEU to extract sseu from device info. (Chris)
v3:
- rebase on latest tip
v5:
- Added references (Mika)
- Change the ordered of passing arguments and etc. (Ursulin)
v7:
- Moved WA explanation Comments(Oscar)
- Rebased.
v8:
- Renamed sanitize_mcr to calculate_s_ss_select. (Oscar)
- calculate s/ss selector instead of whole mcr. (Oscar)
v9:
- Updated function name (Oscar)
- Remove redundant variables (Oscar)
v10:
- Separate pre-GEN10 and GEN11 mask. (Oscar)
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Yunwei Zhang <yunwei.zhang@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526683197-24656-1-git-send-email-yunwei.zhang@intel.com
'Pipe CSC enable' bit is more than just deprecated in ICL+, it was
disabled in commit 077ef1f09c ("drm/i915/icl: Don't set pipe
CSC/Gamma in PLANE_COLOR_CTL") for primary and sprite planes as it was
causing those planes to be rendered as always black but it was not
disabled in cursor plane, also causing it to be rendered as black.
As mentioned in the commit referenced above, this is a workaround
too and the CSC and gamma per plane values needs to be setup before
enable CSC and gamma again.
BSpec: 4278 and 7635
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518201547.15793-1-jose.souza@intel.com
The power sequencer has bits to allow DP C to be used for eDP.
Currently we assume this will never happen, but I guess it could
theoretically be a thing. Make the code do the right thing in that
case, and toss in a MISSING_CASE() for any other port.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Clean up the DP pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state(),
the port state asserts, and the VLV power sequencer code.
v2: Return PIPE_A for cpt/ppt when the port isn't selected by
any transcoder. Returning INVALID_PIPE explodes *somewhere*
on some machines (can't immediately see where though). This
now matches the old behaviour.
v3: Order the defines shift,mask,value (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
for_each_encoder_on_crtc() is legacy and shouldn't be used by atomic
drivers. Let's throw out intel_trans_dp_port_sel() and replace it
with intel_get_crtc_new_encoder() which looks the atomic state instead.
Since we now have to call intel_get_crtc_new_encoder() during the commit
phase we'll need to plumb in the top level atomic state. The
crtc_state->state pointers are no longer valid at that point.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518152931.13104-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
nospec quite reasonably asserts that it will never be used with an index
larger than unsigned long (that being the largest possibly index into an
C array). However, our ubi uses the convention of u64 for any large
integer, running afoul of the assertion on 32b. Reduce our index to an
unsigned long, checking for type overflow first.
drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl':
include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
Reported-by: kbuild-all@01.org
Fixes: 84b510e22d ("drm/i915/query: Protect tainted function pointer lookup")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
Replace dev_priv->vbt.edp.support with
dev_priv->vbt.int_lvds_support. We'll want to extend its
use beyond the LVDS vs. eDP case in the future.
v2: Nuke the edp.support from parse_edp() (Jani)
Only clear int_lvds_support for gen5+ to preserve
the current behaviour (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508140814.20105-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
As we handle the allocation failure of the page directory and tables by
propagating the failure back to userspace, allow it to fail if direct
reclaim is unable to satisfy the request (i.e. disable the oomkiller).
The premise being that if we are unable to allocate a single page for
the pagetable, we will not be able to handle the multitude of pages
required for the gfx operation and we should back off to allow the
system to recover.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106609
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522083643.29601-1-chris@chris-wilson.co.uk
Smatch identifies i915_query_ioctl() as being a potential victim of
Spectre due to its use of a tainted user index into a function pointer
array. Use array_index_nospec() to defang the user index before using it
to lookup the function pointer.
Fixes: a446ae2c6e ("drm/i915: add query uAPI")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521210530.26008-1-chris@chris-wilson.co.uk
This reverts commit dc911f5bd8.
Per the report, no matter what display mode you select with xrandr, the
i915 driver will always select the alternate fixed mode. For the
reporter this means that the display will always run at 40Hz which is
quite annoying. This may be due to the mode comparison.
But there are some other potential issues. The choice of alt_fixed_mode
seems dubious. It's the first non-preferred mode, but there are no
guarantees that the only difference would be refresh rate. Similarly,
there may be more than one preferred mode in the probed modes list, and
the commit changes the preferred mode selection to choose the last one
on the list instead of the first.
(Note that the probed modes list is the raw, unfiltered, unsorted list
of modes from drm_add_edid_modes(), not the pretty result after a
drm_helper_probe_single_connector_modes() call.)
Finally, we already have eerily similar code in place to find the
downclock mode for DRRS that seems like could be reused here.
Back to the drawing board.
Note: This is a hand-crafted revert due to conflicts. If it fails to
backport, please just try reverting the original commit directly.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469
Reported-by: Rune Petersen <rune@megahurts.dk>
Reported-by: Mark Spencer <n7u4722r35@ynzlx.anonbox.net>
Fixes: dc911f5bd8 ("drm/i915/edp: Allow alternate fixed mode for eDP if available.")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516080110.22770-1-jani.nikula@intel.com
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass.
v2: Only hold a single reference per framebuffer, not per plane. (Ville)
v3: Drop NULL check in intel_fb_obj. (Ville)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180518143008.4120-2-daniels@collabora.com
We already have a macro to pull the GEM object from a FB, so use it
everywhere. We'll make use of this later to move the object storage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180518143008.4120-1-daniels@collabora.com
When we do shadowing, workload's request might not be allocated yet,
so we still require shadow context's object. And when complete workload,
delay to zero workload's request pointer after used for update guest context.
v2: Move request alloc earlier as already try to track shadow status
depending on request state, which also facilitate to use request->hw_context
for target engine context reference.
Fixes: 1fc44d9b1a ("drm/i915: Store a pointer to intel_context in i915_request")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521081752.31056-1-zhenyuw@linux.intel.com
When testing reset, we wait for 1s on the main thread for the hang to
start. Meanwhile, we continue submitting requests on all the background
threads, and we may have more threads than cores and so potentially
starve the waiter from being woken within the timeout. As the hang
timeout and the active timeouts are the same, it is hard to distinguish
which caused the timeout. Bump the active thread timeouts to 5s,
compared to the 1s timeout for the hang, so that we preferentially
report the hang timing out, while hopefully ensuring that we do at least
wake up the hang thread first before declaring the background active
timeout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517142442.16979-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In order to support engine reset from irq (timer) context, we need to be
able to re-initialise the breadcrumbs. So we need to promote the plain
spin_lock_irq to a safe spin_lock_irqsave.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-3-chris@chris-wilson.co.uk
We want to be able to reset the GPU from inside a timer callback
(hardirq context). One step requires us to copy the default context
state over to the guilty context, which means we need to plan in advance
to have that object accessible from within an atomic context. The atomic
context prevents us from pinning the object or from peeking into the
shmemfs backing store (all may sleep), so we choose to pin the
default_state into memory when the engine becomes active. This
compromise allows us to swap out the default state when idle, when
required.
References: 5692251c25 ("drm/i915/lrc: Scrub the GPU state of the guilty hanging request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-2-chris@chris-wilson.co.uk
To be useful later, enable intel_engine_dump() to be called from irq
context (i.e. using saving and restoring irq start rather than assuming
we enter with irqs enabled).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518090212.5349-1-chris@chris-wilson.co.uk
We rely on ksoftirqd to run in a timely fashion in order to drain the
execlists queue. Quite frequently, it does not. In some cases we may see
latencies of over 200ms triggering our idle timeouts and forcing us to
declare the driver wedged!
Thus we can speed up idle detection by bypassing ksoftirqd in these
cases and flush our tasklet to confirm if we are indeed still waiting
for the ELSP to drain.
v2: Put the execlists.first check back; it is required for handling
reset!
References: https://bugs.freedesktop.org/show_bug.cgi?id=106373
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180506171328.30034-1-chris@chris-wilson.co.uk
Almost all of the GEN7 checks in the DP code are actually looking for
IVB. HSW doesn't even take these codepaths, and VLV is excluded on
account of not having port A. So let's change the checks to IS_IVB to
make the code less confusing.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-3-ville.syrjala@linux.intel.com
All DDI platforms support the full set of preemph settings for each
supported vswing, so let's use the same code for them. We'll also move
the code into intel_ddi.c so that it sits closer to the actual buf trans
tables.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use intel_ddi_dp_voltage_max() for HSW/BDW too instead of letting these
fall through the if ladder in a weird way. This function will look at
the actual buf trans tables we have for HSW/BDW to determine the max
vswing level.
It looks to me like the current code leads HSW port A down the IVB port
A path, HSW port B+ and BDW fall through to the very end. Both cases do
result in the correct max vswing level 2, but it's very hard to see that
from the code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517170309.28630-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
As all backends implement the same pin_count mechanism and do a
dec-and-test as their first step, pull that into the common
intel_context_unpin(). This also pulls into the caller, eliminating the
indirect call in the usual steady state case. The intel_context_pin()
side is a little more complicated as it combines the lookup/alloc as
well as pinning the state, and so is left for a later date.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-4-chris@chris-wilson.co.uk
To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.
v2: Set mock_context->ops so we don't crash and burn in selftests.
Cleanups from Tvrtko.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk
In the next patch, we want to store the intel_context pointer inside
i915_request, as it is frequently access via a convoluted dance when
submitting the request to hw. Having two context pointers inside
i915_request leads to confusion so first rename the existing
i915_gem_context pointer to i915_request.gem_context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-1-chris@chris-wilson.co.uk
The scheduler lock(gvt->sched_lock) is used to protect gvt
scheduler logic, including the gvt scheduler structure(gvt->scheduler
and per vgpu schedule data(vgpu->sched_data, vgpu->sched_ctl).
v9:
- Change commit author since the patches are improved a lot compared
with original version.
Original author: Pei Zhang <pei.zhang@intel.com>
- Rebase to latest gvt-staging.
v8:
- Correct coding wqstyle.
- Rebase to latest gvt-staging.
v7:
- Remove gtt_lock since already proteced by gvt_lock and vgpu_lock.
v6:
- Rebase to latest gvt-staging.
v5:
- Rebase to latest gvt-staging.
v4:
- Rebase to latest gvt-staging.
v3: update to latest code base
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
For all platforms that run haswell_crtc_enable, our spec tells us to
configure the transcoder clocks and do link training before it tells
us to set pipeconf and the other pipe/transcoder/plane registers.
Starting from Icelake, we get machine hangs if we try to touch the
pipe/transcoder registers without having the clocks configured and not
having some chicken bits set. So this patch changes
haswell_crtc_enable() to issue the calls at the appropriate order
mandated by the spec.
While setting the appropriate chicken bits would also work here, it's
better if we actually program the hardware the way it is intended to
be programmed. And the chicken bit also has some theoretical downsides
that may or may not affect us. Also, correctly programming the
hardware does not prevent us from setting the chicken bits in a later
patch in case we decide to.
v2: Don't forget link training (Ville).
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502215851.30736-1-paulo.r.zanoni@intel.com
Stop reading some now deprecated interrupt registers in both
debugfs and error state. Instead, read the new equivalents in the
Gen11 interrupt repartitioning scheme.
Note that the equivalent to the PM ISR & IIR cannot be read without
affecting the current state of the system, so I've opted for leaving
them out. See gen11_reset_one_iir() for more info.
v2: else if !!! (Paulo)
v3: another else if (Vinay)
v4:
- Rebased
- Renamed patch
- Improved the ordering of GENs
- Improved the printing of per-GEN info
v5: Avoid maybe-unitialized & add comment explaining the lack
of PM ISR & IIR
Suggested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
[Paulo: fix commit message and coding style.]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525989595-18220-1-git-send-email-oscar.mateo@intel.com
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e33 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!
References: 41736a8e33 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk
Make sure that when we don't have any scheduler attributes for the
request, the string is terminated.
Fixes: 247870ac8e ("drm/i915: Build request info on stack before printk")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517152824.11619-1-chris@chris-wilson.co.uk
The HWACK bit more generically solves the problem of resubmitting ESLP
while the hardware is still processing the current ELSP write. We no
longer need to check port[0].count itself.
References: ba74cb10c7 ("drm/i915/execlists: Delay writing to ELSP until HW has processed the previous write")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517115647.17205-1-chris@chris-wilson.co.uk
Parametrize the DVO pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-5-ville.syrjala@linux.intel.com
Parametrize the TV pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
v2: Order the defines shift,mask,value (Jani)
Clear the stale pipe select bit in load detection (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-4-ville.syrjala@linux.intel.com
Clean up the SDVO pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-3-ville.syrjala@linux.intel.com
Clean up the LVDS pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Drop ruperfluous braces and whitesapce changes (Jani)
Combine masks in compute_is_dual_link_lvds() (Jani)
v3: Fix LVDS_PIPE_SEL_MASK_CPT
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514182827.28629-1-ville.syrjala@linux.intel.com
Clean up the ADPA pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514172423.9302-1-ville.syrjala@linux.intel.com
Compute the offset of the end of the crc32 field using offsetofend()
rather than open-coding.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We cannot call kthread_park() from softirq context, so let's avoid it
entirely during the reset. We wanted to suspend the signaler so that it
would not mark a request as complete at the same time as we marked it as
being in error. Instead of parking the signaling, stop the engine from
advancing so that the GPU doesn't emit the breadcrumb for our chosen
"guilty" request.
v2: Refactor setting STOP_RING so that we don't have the same code thrice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michałt Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-8-chris@chris-wilson.co.uk
Catch up with the inflight CSB events, after disabling the tasklet
before deciding which request was truly guilty of hanging the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-7-chris@chris-wilson.co.uk
Pull the CSB event processing into its own routine so that we can reuse
it during reset to flush any missed interrupts/events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-6-chris@chris-wilson.co.uk
In the next patch, we will make the execlists reset prepare callback
take into account preemption by flushing the context-switch handler.
This is not applicable to the GuC submission backend, so split the two
into their own backend callbacks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-5-chris@chris-wilson.co.uk
In preparation to more carefully handling incomplete preemption during
reset by execlists, we move the existing code wholesale to the backends
under a couple of new reset vfuncs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-4-chris@chris-wilson.co.uk
As a complement to inject_preempt_context(), follow up with the function
to handle its completion. This will be useful should we wish to extend
the duties of the preempt-context for execlists.
v2: And do the same for the guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-3-chris@chris-wilson.co.uk
When setting up reset, we may need to recursively prepare an engine. In
which case we should only synchronously flush the tasklets on the outer
most call, the inner calls will then be inside an atomic section where
the tasklet will never be run (and so the sync will never complete).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-2-chris@chris-wilson.co.uk
The idea was to try and let the existing tasklet run to completion
before we began the reset, but it involves a racy check against anything
else that tries to run the tasklet. Rather than acknowledge and ignore
the race, let it be and don't try and be too clever.
The tasklet will resume execution after reset (after spinning a bit
during reset), but before we allow it to resume we will have cleared all
the pending state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-1-chris@chris-wilson.co.uk
When switching to the kernel context, we force the switch to occur after
all currently active requests (so that we know the GPU won't switch
immediately away and the kernel context remains current as we work). To
do so we have to inspect all the timelines and add a fence from the
active work to queue our switch afterwards. We can use the tracked set
of active rings to shrink our search for active timelines.
v2: Use a local to shrink the list_for_each_entry()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515143149.4795-1-chris@chris-wilson.co.uk
Guest OS driver uses PV info registers to deliver cursor hotspot info
to host. This patch is used to get cursor hotspot info from virtual
registers and deliver it to host userspace.
v4->v5:
- remove CI warning.
v3->v4:
- return UINT_MAX when x_hot/y_hot is invalid. (Zhenyu)
- correct version.
v2->v3:
- add validate_hotspot(). (Zhenyu)
v1->v2:
- name as cursor_x_hot/cursor_y_hot. (Zhenyu)
- use i915_reg_t definition instead of magic numbers. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When we process the outstanding requests upon banning a context, we need
to acquire both the engine and the client's timeline, nesting the locks.
This requires explicit markup as the two timelines are now of the same
class, since commit a89d1f921c ("drm/i915: Split i915_gem_timeline into
individual timelines").
Testcase: igt/gem_eio/banned
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180512084957.9829-1-chris@chris-wilson.co.uk
The original switch to use CSB from the HWSP was plagued by the effect
of read ordering on VT-d; we would read the WRITE pointer from the HWSP
before it had completed writing the CSB contents. The mystery comes down
to the lack of rmb() for correct ordering with respect to the writes
from HW, and with that resolved we can remove the VT-d special casing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-3-chris@chris-wilson.co.uk
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
This reverts commit 11474e9091.
There are issues which will block the host preemption before, instead of
disabling it use one workaround "setting max priority for gvt context"
to avoid the gvt context be preempted by the host. Now the issues have been
cleared, so revert this patch to enable host preemption.
v2:
- refine description(Zhenyu)
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
the cmd_reg_handler() is called by cmds LRM, PIPE_CTRL, SRM...
for LRM, SRM, we cannot get write data in a simple way.
On other side, the force_to_nonpriv reigsters will only be written in LRI
in current drivers. so we don't want to bother the handler to handle those
memory access cmds, just leave a print message here.
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Return error will cause vm hang and enter failsafe mode.
However, we don't want that happen on detecting an wrong force_to_nonpriv
register write.
Therefore, we just omit the wrong write or patch it to default value.
v2: only return 0 on detecting lri write of registers outside whitelist,
but still return error on other error conditions. (zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Reviewed-by: Zhang Yulei <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Each ring has a NOPID register and currently they are regarded as default
value of force_to_nonpriv registers in guest drivers
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The disable_warn_untrack never prevent gvt from printing untracked
mmio errors. We were disturbed by this error storm and the fix is
just adding them to the list with no essential new change.
This message is only useful for enabling new platform during
developing process. So lower the message level to debug and then
remove disable_warn_untrack.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We write all 4K page entries, even when using 64K pages. In order to
verify that the HW isn't cheating by using the 4K PTE instead of the 64K
PTE, we want to remove all the surplus entries. If the HW skipped the
64K PTE, it will read/write into the scratch page instead - which we
detect as missing results during selftests.
v2: much improved commentary (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511095140.25590-1-matthew.auld@intel.com
Before we unpin the buffer used for OA reports and return it to the
system, we need to be sure that the HW has finished writing into it.
For lack of a better idea, poll OACONTROL to check it is switched off.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk
In the previous patch (to include a rmb() after readig the CSB WRITE
pointer from the HWSP) we believe we have fixed the underlying bug, and
so can re-enable using the HWSP on Cannolake.
This reverts commit 61bf9719fa ("drm/i915/cnl: Use mmio access to
context status buffer").
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-2-chris@chris-wilson.co.uk
We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:
* (HW) (DRIVER)
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.
The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
Fixes: 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
Avoids a hang during soft reset.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Which steppings affected by this are not clear.
For the moment, apply unconditionally as per the
BSpec (Mika)
- Add reference to another HSD also related
References: HSDES#1405476379
References: HSDES#2006612137
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-14-git-send-email-oscar.mateo@intel.com
Disable CGPSF unit clock gating to prevent an issue.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Remove unintentional whitespaces (Mika)
- Fixed in C0 (Mika)
References: HSDES#1406838659
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-13-git-send-email-oscar.mateo@intel.com
Disable I2M Write for performance reasons.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- GEN7 chicken bit in the wrong side of the fence (Mika)
- Use two spaces to align bit macros
References: HSDES#1604302699
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-12-git-send-email-oscar.mateo@intel.com
Disable GWL clock gating to prevent an issue that might
cause hangs.
v2: Rebased on top of the WA refactoring
v3: Wa_2201832410 officially merged with Wa_1406680159
v4: Added References (Mika)
v5:
- Rebased
- C, not lisp (Chris)
- Add reference where WA is better explained (Rodrigo)
- Add reference to WA that got merged with this
References: HSDES#1406681710
References: HSDES#1406680159
References: HSDES#2201832410
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-11-git-send-email-oscar.mateo@intel.com
Disable MSC clock gating to prevent data corruption.
BSpec: 19257
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- A0 only (Mika)
References: HSDES#1405779004
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-10-git-send-email-oscar.mateo@intel.com
Revert to the legacy implementation to avoid a system hang.
v2: Correct the address for GAMW_ECO_DEV_RW_IA_REG
v3: Renamed to Wa_220166154
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#220166154
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-9-git-send-email-oscar.mateo@intel.com
This workarounds an issue with insufficient storage for the
CL2 and SF units.
v2: Renamed to Wa_1405766107
v3: Wrapped the commit message
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- s/MACALLOC/MAXALLOC (Mika)
- C, not lisp (Chris)
References: HSDES#1405766107
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-8-git-send-email-oscar.mateo@intel.com
Avoids an undefined LLC behavior.
BSpec: 9613
v2: Renamed to Wa_1405733216
v3: Spaces around '<<' and fix surrounding code
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#1405733216
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-7-git-send-email-oscar.mateo@intel.com
Adjust default GAM TLB partitioning for performance reasons.
v2: Only touch the bits that we really need
v3: Rebased on top of the WA refactoring
v4:
- Added References (Mika)
- Rebased
v5:
- Rebased
- C, not lisp (Chris)
- Correct reference number (Mika)
References: HSDES#220160670
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-6-git-send-email-oscar.mateo@intel.com
Revert to an L3 non-hash model, for performance reasons.
v2:
- Place the WA name above the actual change
- Improve the register naming
v3:
- Rebased
- Renamed to Wa_1604223664
v4: Rebased on top of the WA refactoring
v5:
- Added References (Mika)
- Fixed wrong mask and value (Mika)
- Do not apply together with another WA for the same
register (not worth the hassle)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#1604223664
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-5-git-send-email-oscar.mateo@intel.com
The default GAPZ arbitrer priority value at power-on has been found
to be incorrect.
v2: Now renamed to Wa_1405543622
v3: Rebased on top of the WA refactoring
v4: Added HSDES reference number (Mika)
v5:
- Rebased
- C, not lisp (Chris)
References: HSDES#1405543622
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-4-git-send-email-oscar.mateo@intel.com
Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler
power by dynamically changing its clock frequency in low-throughput
conditions. This patches enables it by default on Gen11.
v2: Wrong operation to clear the bit (Praveen)
v3: Rebased on top of the WA refactoring
v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo)
v5: C, not lisp (Chris)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com
Inherit workarounds from previous platforms that are still valid for
Icelake.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Since it has been fixed already in upstream, removed the TODO
comment about WA_SET_BIT for WaInPlaceDecompressionHang.
- Squashed with this patch:
drm/i915/icl: add icelake_init_clock_gating()
from Paulo Zanoni <paulo.r.zanoni@intel.com>
- Squashed with this patch:
drm/i915/icl: WaForceEnableNonCoherent
from Oscar Mateo <oscar.mateo@intel.com>
- WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
applies to B0 as well.
- WaPipeControlBefore3DStateSamplePattern WABB was being applied
to ICL incorrectly.
v4:
- Wrap the commit message
- s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
- C, not lisp (Chris)
- WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
This patch adds NV12 to list of supported formats for sprite plane.
v2: Rebased (me)
v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added
NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats
v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats
by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series
for SKL.
v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B
v7: Rebased (me)
v8: Rebased (me)
Restricting NV12 changes to BXT and KBL
Restricting NV12 changes for plane 0 (overlay)
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 to skl_plane_formats itself.
v11: Addressed review comments from Shashank Sharma
v12: Addressed review comments from Shashank Sharma
Made the condition in intel_sprite_plane_create
simple and easy to read as suggested.
v13: Adding reviewed by tag from Shashank Sharma
Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Ville
Added skl_planar_formats to include NV12
and a check skl_plane_has_planar in sprite create
Added NV12 format to skl_mod_supported. These were
review comments from Kristian Høgsberg <hoegsberg@gmail.com>
v15: Added reviewed by from Juha-Pekka Heikkila
v16: Rebased the series
v17: Added all tiling under mod supported for NV12
Credits to Megha Aggarwal
v18: Added RB by Maarten and Kristian
v19: Addressed review comments from Maarten
Made modification to skl_mod_supported
Credits-to: Megha Aggarwal <megha.aggarwal@intel.com>
Credits-to: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 to list of supported formats for
primary plane
v2: Rebased (Chandra Konduru)
v3: Rebased (me)
v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and
added NV12 case in existing skl_primary_formats
v5: Rebased (me)
v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B
Rebased (me)
v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 inside skl_primary_formats itself.
v11: Adding Reviewed By tag from Shashank Sharma
v12: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v13: Addressed review comments from Ville
Added skl_pri_planar_formats to include NV12
and skl_plane_has_planar function to check for
NV12 support on plane. Added NV12 format to
skl_mod_supported. These were review comments
from Kristian Høgsberg <hoegsberg@gmail.com>
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
v16: Added all tiling support under mod supported
for NV12. Credits to Megha Aggarwal
v17: Added RB by Maarten and Kristian
v18: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
v19: Addressed review comments from Maarten
Make changes to skl_mod_supported
Credits-to: Megha Aggarwal megha.aggarwal@intel.com
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.
v2:
-Fix an issue in checks added (Chandra Konduru)
v3: rebased (me)
v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init
Removed offset checks for NV12 case
v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms
causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to
SKL and BXT only.
v6: Rebased (me)
v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.
v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.
v9: Rebased (me)
v10: NV12 supported by all GEN >= 9.
Making this change in intel_framebuffer_init. This is
part of addressing Maarten's review comments.
Comment under v8 no longer applicable
v11: Addressed review comments from Shashank Sharma
v12: Adding Reviewed By from Shashank Sharma
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Maarten.
Add checks for fb width height for NV12 and fail the fb
creation if check fails. Added reviewed by from
Juha-Pekka Heikkila
v15: Rebased the series
v16: Setting the minimum value during fb creating to 16
as per Bspec for NV12. Earlier minimum was expected
to be > 16. Now changed it to >=16.
v17: Adding restriction to framebuffer_init - the fb
width and height should be a multiplier of 4
v18: Added RB from Maarten. Included Maarten's review comments
Dont allow CCS formats for fb creation of NV12
v19: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-5-git-send-email-vidya.srinivas@intel.com
We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.
v2: For NV12, making the src coordinates multiplier of 4
v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface
v4: Added RB from Mika
v5: Rebased the series. Removed checks of mult of 4 in
skl_update_scaler, Added NV12 condition in intel_check_sprite_plane
where src x/w is being checked for mult of 2 for yuv planes.
v6: Made changes to skl_check_nv12_surface as per WA#1106
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-4-git-send-email-vidya.srinivas@intel.com
Possible hang with NV12 plane surface formats.
WA: When the plane source pixel format is NV12,
the CHICKEN_PIPESL_* register bit 22 must be set to 1
and the render decompression must not be enabled
on any of the planes in that pipe.
v2: removed unnecessary POSTING_READ
v3: Added RB from Maarten
v4: Removed support for NV12 for BROXTON
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-3-git-send-email-vidya.srinivas@intel.com
The workaround was applied only to the primary plane, but is required
on all planes. Iterate over all planes in the crtc atomic check to see
if the workaround is enabled, and only perform the actual toggling in
the pre/post plane update functions.
Changes since v1:
- Track active NV12 planes in a nv12_planes bitmask. (Ville)
v2: Removing BROXTON support for NV12 due to WA826
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-2-git-send-email-vidya.srinivas@intel.com
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.
Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com
Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk
Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-1-chris@chris-wilson.co.uk
In igt_flush_test() we try to switch back to the kernel context, but we
are only able to do so when we are called with struct_mutex held.
More of my CI fallout from lockdep being temporarily suppressed :(
Fixes: 4cdf65ce8c ("drm/i915/selftests: Return to kernel context after each test")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509065926.19207-1-chris@chris-wilson.co.uk
Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911 ("drm/i915: Remove intel_flip_work
infrastructure")
References: 8b5d27b911 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.
v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.
v2: Keep rcu_read_lock() around for PREEMPT_RCU
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As we flush each test and wait for idle before the next, also switch
back to the kernel context. This helps limit the amount of collateral
damage a test may cause by resetting to the default state each time (and
also helps clean up temporaries used by the test).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508115312.12628-1-chris@chris-wilson.co.uk
Add some onion to populate_lr_context.
v2: prefer err_unpin_ctx
drop the fixes tag, worst case we just spew a warn before everything
is cleaned up and balance is restored
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180301114639.510-1-matthew.auld@intel.com
igt_ctx_exec() expects that we retire all active requests/objects before
completing, so that when we clean up the files afterwards they are ready
to be freed. Before we do so, it is then prudent to ensure that we have
indeed retired the GPU activity, raising an error if it fails. If we do
not, we run the risk of triggering an assertion when freeing the object:
__i915_gem_free_objects:4793 GEM_BUG_ON(i915_gem_object_is_active(obj))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180505091014.26126-2-chris@chris-wilson.co.uk
Operating on a zero sized GEM userptr object will lead to explosions.
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
When rescheduling a change of dependencies, they all need to be added to
the same priolist (at least the ones on the same engine!). Since we
likely want to move a batch of requests, keep the priolist around.
v2: Throw in an assert to catch trivial errors quickly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-2-chris@chris-wilson.co.uk
lookup_priolist() no longer attaches the request into the priolist, it
just returns the priolist for the given priority instead. Drop the
unused parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508003046.2633-1-chris@chris-wilson.co.uk
Unsafe module parameters are just that, unsafe. If the user is foolish
enough to try them and the kernel breaks, they get to keep both pieces.
Don't ask them to file a bug report if they broke it themselves.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106423
Fixes: d15d7538c6 ("drm/i915: Tune down init error message due to failure injection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180506183147.2690-1-chris@chris-wilson.co.uk
This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.
I recommend grabbing some coffee, a pen and paper before reviewing
this patch.
v2:
- Correctly identify DP encoders after upstream change.
- Small checkpatch issues.
- Rebase.
v3:
- Try to impove the comment on the tdc_targetcnt calculation based on
Manasi's feedback (Manasi).
- Rebase.
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.
v2:
- Properly detect HDMI crtcs.
- Rebase after changes to the cnl function (clock * 1000).
v3:
- Add a comment to clarify why we treat 38.4 as 19.2 (James).
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-5-paulo.r.zanoni@intel.com
This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.
Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.
v2:
- Rebase around dpll_lock changes.
v3:
- The spec now says what the timeouts should be.
- Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
the machine.
- Checkpatch found a white space problem.
- Small adjustments before upstreaming.
v4:
- Move the ICL checks out of the *map_plls_to_ports() functions
(James)
- Add extra encoder check (James)
- Call icl_unmap_plls_to_ports() later (James)
v5:
- Rebase after the pll struct changes.
v6:
- Properly make the unmap function based on encoders_post_disable()
with regarding to checks and iterators.
- Address checkpatch comment on "min = max = x()".
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427231436.9353-1-paulo.r.zanoni@intel.com
Add documentation to gen9_set_dc_state() on what enabling a given DC
state means and at what point HW/DMC actually enters/exits these states.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113147.25120-1-imre.deak@intel.com
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.
Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.
This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.
This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.
[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
code and properly cover the max hw timeout of ~4 seconds, and
drop the comment about the specific machine since this is not
a particulary surprising issue, nor specific to that one machine]
Signed-off-by: Florent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
It is useful to see the priority as requests are coming in and completed
status as requests are coming out of the GPU.
To achieve this in a more readable way we need to abandon the common
request_hw tracepoint class.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504115643.22437-1-tvrtko.ursulin@linux.intel.com
Following commit f773568b6f ("drm/i915: nuke the duplicated stolen
discovery"), the if-else-chain for determining the GTT size is redundant
with the !chv branches all being the same.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: f773568b6f ("drm/i915: nuke the duplicated stolen discovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503212956.3948-1-chris@chris-wilson.co.uk
Limit the arbitration (where preemption may occur) to inside the batch,
and prevent it from happening on the pipecontrols/flushes we use to
write the breadcrumb seqno. Once the user batch is complete, we have
nothing left to do but serialise and emit the breadcrumb; switching
contexts at this point is futile so don't.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195416.22498-1-chris@chris-wilson.co.uk
Don't pre-emptively retire the oldest request in our ring's list if it
is the only request. We keep various bits of state alive using the
active reference from the request and would rather transfer that state
over to a new request rather than the more involved process of retiring
and reacquiring it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-2-chris@chris-wilson.co.uk
When userspace is passing around swapbuffers using DRI, we frequently
have to open and close the same object in the foreign address space.
This shows itself as the same object being rebound at roughly 30fps
(with a second object also being rebound at 30fps), which involves us
having to rewrite the page tables and maintain the drm_mm range manager
every time.
However, since the object still exists and it is only the local handle
that disappears, if we are lazy and do not unbind the VMA immediately
when the local user closes the object but defer it until the GPU is
idle, then we can reuse the same VMA binding. We still have to be
careful to mark the handle and lookup tables as closed to maintain the
uABI, just allowing the underlying VMA to be resurrected if the user is
able to access the same object from the same context again.
If the object itself is destroyed (neither userspace keeping a handle to
it), the VMA will be reaped immediately as usual.
In the future, this will be even more useful as instantiating a new VMA
for use on the GPU will become heavier. A nuisance indeed, so nip it in
the bud.
v2: s/__i915_vma_final_close/i915_vma_destroy/ etc.
v3: Leave a hint as to why we deferred the unbind on close.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503195115.22309-1-chris@chris-wilson.co.uk
In Icelake, there are more engines on which Memory Object Control
States need to be configured. Besides adding Icelake under Skylake
config, the patch makes sure MOCS register addresses for the new
engines are properly defined.
Additional patch might be need later, in case the specification will
propose different MOCS config values for Icelake than in previous
gens.
v2: Restricted comments to gen11, updated description, renamed
defines.
v3: Used proper engine indexes for gen11.
v4: Ensure patch is Icelake only.
v5: Style fixes (proposed by mwajdeczko)
v6 (from Paulo): fix checkpatch's COMMIT_LOG_LONG_LINE (Checkpatch).
BSpec: 19405
BSpec: 21140
Cc: Oscar Mateo Lozano <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502223142.3891-1-paulo.r.zanoni@intel.com
During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.
This fixes a problem introduced by commit a2936e3d9a ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.
The failure manifests as a WARN:
[ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[ 0.764713] ------------[ cut here ]------------
[ 0.764714] Could not determine valid watermarks for inherited state
[ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...
Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: FadeMind <fademind@gmail.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d9a ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: FadeMind <fademind@gmail.com>
No functional changes, just a minor knit. Stumbled across the kernel doc for
schedule_timeout() which quotes "In all cases the return value is guaranteed
to be non-negative". Also, the return code of schedule_timeout() already checks
for negative values "return timeout < 0 ? 0 : timeout;" and returns 0
in such cases. Furthermore, the msec_to_jiffies returns an ungined long
value. So, let's do away with the redundant check for an atomic
pipe update.
v2: Commit message changes (Manasi).
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502233300.81220-1-tarun.vyas@intel.com
On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco
However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.
So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.
[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 42.897269] cdclk state doesn't match!
[ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
v2: Move the entire eDP's vco logical adjustment to inside
the skl_modeset_calc_cdclk as suggested by Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab0e ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com
As we unpark the engines and are about to begin a new cycle of activity,
mark the current status of the hangceck as idle so that we avoid
carrying over a stale timestamp/action into the next cycle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502220313.6459-2-chris@chris-wilson.co.uk
If we try to suspend a wedged device following a GPU reset failure, we
will also fail to turn off the rc6 powerwells (on vlv), leading to a
*ERROR*. This is quite expected in this case, so the best we can do is
shake our heads and reduce the *ERROR* to a debug so CI stops
complaining.
Testcase: igt/gem_eio/in-flight-suspend #vlv
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105583
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409094905.4516-1-chris@chris-wilson.co.uk
Move the tracepoint into the common execlists_context_schedule_out() and
call it from preemption completion as well. A small bit of refactoring
code should help with when tracing, or else we end up with requests
mysteriously disappearing and some being emitted to HW multiple times.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502230202.6848-1-chris@chris-wilson.co.uk
We need to move to a more flexible timeline that doesn't assume one
fence context per engine, and so allow for a single timeline to be used
across a combination of engines. This means that preallocating a fence
context per engine is now a hindrance, and so we want to introduce the
singular timeline. From the code perspective, this has the notable
advantage of clearing up a lot of mirky semantics and some clumsy
pointer chasing.
By splitting the timeline up into a single entity rather than an array
of per-engine timelines, we can realise the goal of the previous patch
of tracking the timeline alongside the ring.
v2: Tweak wait_for_idle to stop the compiling thinking that ret may be
uninitialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-2-chris@chris-wilson.co.uk
In the future, we want to move a request between engines. To achieve
this, we first realise that we have two timelines in effect here. The
first runs through the GTT is required for ordering vma access, which is
tracked currently by engine. The second is implied by sequential
execution of commands inside the ringbuffer. This timeline is one that
maps to userspace's expectations when submitting requests (i.e. given the
same context, batch A is executed before batch B). As the rings's
timelines map to userspace and the GTT timeline an implementation
detail, move the timeline from the GTT into the ring itself (per-context
in logical-ring-contexts/execlists, or a global per-engine timeline for
the shared ringbuffers in legacy submission.
The two timelines are still assumed to be equivalent at the moment (no
migrating requests between engines yet) and so we can simply move from
one to the other without adding extra ordering.
v2: Reinforce that one isn't allowed to mix the engine execution
timeline with the client timeline from userspace (on the ring).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-1-chris@chris-wilson.co.uk
Replace 01.org URL with upstream linux-firmware repo URL.
We no longer release firmware to 01.org.
linux-firmware.git is the ultimate place to find
the i915 firmwares.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525129168-529-1-git-send-email-anusha.srivatsa@intel.com
As our early doorbell is split between early allocation and a late setup
after we have a channel to the GuC, it may happen due to a lapse of
programmer judgement that we try to setup an invalid doorbell. Make use
of our has_doorbell() function to check the doorbell does exist for the
client before we try and tell the guc about it. In doing so, we prevent
the compiler from warning about the otherwise unused function in some
configurations.
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501075203.12458-1-chris@chris-wilson.co.uk
Commit 39bf4de89f ("drm/i915: Add -Wall -Wextra to our build, set
warnings to full") enabled extra warnings for i915 to spot possible
bugs in new code, and then disabled a subset of these warnings to keep
the current code building without warnings (with gcc). Enabling the
extra warnings also enabled some additional clang-only warnings, as a
result building i915 with clang currently is extremely noisy. For now
also disable the clang warnings sign-compare, sometimes-uninitialized,
unneeded-internal-declaration and initializer-overrides. If desired
they can be re-enabled after the code has been fixed.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501182440.70121-1-mka@chromium.org
Since the advent of execlists, the HW no longer executes from a single
statically assigned ring, but instead switches to a different ring for
each context (logical ringbuffer contexts as it is called). So a good way
to tally the executing context against what we have queued is by
comparing the RING_START register against our requests. Make it so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502104150.29874-1-chris@chris-wilson.co.uk
The old wait_on_atomic_t used a custom callback to perform the
schedule(), which used my return semantics of reporting an error code on
timeout. wait_var_event_timeout() uses the schedule() return semantics
of reporting the remaining jiffies (1 if it timed out with 0 jiffies
remaining!) and 0 on failure. This semantic mismatch lead to us falsely
claiming a time out occurred.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106085
Fixes: d224985a5e ("sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417170638.20550-1-chris@chris-wilson.co.uk
Use i915.dmc_firmware_path to override default firmware for the platform
and bypassing version checks.
v2: add missing param struct member declaration (David)
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424122016.2416-1-jani.nikula@intel.com
Using plain jiffies in error state output makes the output
time differences relative to the current system time. This
is wrong as it makes output time differences dependent
of when the error state is printed rather than when it is
captured.
Store capture jiffies into error state and use it
when outputting the state to fix time differences output.
v2: use engine timestamp as epoch, output formatting (Chris)
v3: pass epoch to print_engine/request (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430075259.4476-1-mika.kuoppala@linux.intel.com
Due to the latency of the tasklet running from ksoftirqd, by the time we
process the execlist dequeue may be a long time behind the GPU. If the
request was completed when we ran reschedule, we will not have tweaked
its priority, but if it is still listed as being in-flight for dequeue
we will use it as a reference for the rest of the queue, including
requests from its own context which will now be at higher priority. This
can cause us to issue a preempt-to-idle request, even though the request
we want to preempt is already complete.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180501122131.19435-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
On clock recovery this function is called to find out
the max voltage swing level that we could go.
However gen 9 functions use the old buffer translation tables
to figure that out. ICL uses different set of tables for eDP
and DP for both Combo and MG PHY ports. This patch adds the hook
for ICL for getting this information from appropriate buf trans tables.
v5 (from Paulo):
* New rebase after changes to earlier patches.
v4:
* Rebase.
v3:
* Follow the coding conventions here
(https://cgit.freedesktop.org/drm-intel/tree/Documentation/process/codin
g-style.rst#n191) (Paulo)
v2:
* Rebase after patch that adds voltage check inside buf trans
function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-9-paulo.r.zanoni@intel.com
This is an important part of the DDI initalization as well as
for changing the voltage during DisplayPort link training.
The Voltage swing seqeuence is similar to Cannonlake.
However it has different register definitions and hence
it makes sense to create a separate vswing sequence and
program functions for ICL to leave room for more changes
in case the Bspec changes later and deviates from CNL sequence.
v2:
Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula)
v3:
* Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo)
v4:
* Call it combo_vswing, use switch statement (Paulo)
v5 (from Paulo):
* Fix a typo.
* s/rate < 600000/rate <= 600000/.
* Don't remove blank lines that should be there.
v6:
* Rebased by Rodrigo on top of Cannonlake changes
where non vswing sequences are not aligned with iboost
anymore.
v7: Another rebase after an upstream rework.
v8 (from Paulo):
* Adjust the code to the upstream output type changes.
* Squash the patch that moved some functions up.
* Merge both get_combo_buf_trans functions in order to simplify the
code.
* Change the changelog format.
v9 (from Paulo):
* Use RTERM_SELECT instead of SCALING_MODE_SEL.
* Adjust the output type handling according to how the other platforms
do it now.
v10 (from Paulo):
* Fix comment left out from v9 changes (Rodrigo).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
We don't need to track every ring for its lifetime as they are managed
by the contexts/engines. What we do want to track are the live rings so
that we can sporadically clean up requests if userspace falls behind. We
can simply restrict the gt->rings list to being only gt->live_rings.
v2: s/live/active/ for consistency with gt.active_requests
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-4-chris@chris-wilson.co.uk
In the next patch, rings are the central timeline as requests may jump
between engines. Therefore in the future as we retire in order along the
engine timeline, we may retire out-of-order within a ring (as the ring now
occurs along multiple engines), leading to much hilarity in miscomputing
the position of ring->head.
As an added bonus, retiring along the ring reduces the penalty of having
one execlists client do cleanup for another (old legacy submission
shares a ring between all clients). The downside is that slow and
irregular (off the critical path) process of cleaning up stale requests
after userspace becomes a modicum less efficient.
In the long run, it will become apparent that the ordered
ring->request_list matches the ring->timeline, a fun challenge for the
future will be unifying the two lists to avoid duplication!
v2: We need both engine-order and ring-order processing to maintain our
knowledge of where individual rings have completed upto as well as
knowing what was last executing on any engine. And finally by decoupling
retiring the contexts on the engine and the timelines along the rings,
we do have to keep a reference to the context on each request
(previously it was guaranteed by the context being pinned).
v3: Not just a reference to the context, but we need to keep it pinned
as we manipulate the rings; i.e. we need a pin for both the manipulation
of the engine state during its retirements, and a separate pin for the
manipulation of the ring state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-3-chris@chris-wilson.co.uk
Make life easier in upcoming patches by moving the context_pin and
context_unpin vfuncs into inline helpers.
v2: Fixup mock_engine to mark the context as pinned on use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-2-chris@chris-wilson.co.uk
In commit 9b6586ae9f ("drm/i915: Keep a global seqno per-engine"), we
moved from a global inflight counter to per-engine counters in the
hope that will be easy to run concurrently in future. However, with the
advent of the desire to move requests between engines, we do need a
global counter to preserve the semantics that no engine wraps in the
middle of a submit. (Although this semantic is now only required for gen7
semaphore support, which only supports greater-then comparisons!)
v2: Keep a global counter of all requests ever submitted and force the
reset when it wraps.
References: 9b6586ae9f ("drm/i915: Keep a global seqno per-engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-1-chris@chris-wilson.co.uk
Previously, we just reset the ring register in the context image such
that we could skip over the broken batch and emit the closing
breadcrumb. However, on resume the context image and GPU state would be
reloaded, which may have been left in an inconsistent state by the
reset. The presumption was that at worst it would just cause another
reset and skip again until it recovered, however it seems just as likely
to cause an unrecoverable hang. Instead of risking loading an incomplete
context image, restore it back to the default state.
v2: Fix up off-by-one from including the ppHSWP in with the register
state.
v3: Use a ring local to compact a few lines.
v4: Beware setting the ring local before checking for a NULL request.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105304
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20180428111532.15819-1-chris@chris-wilson.co.uk
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
There's a lot of code for the PLL enabling, so let's first only
introduce the register definitions in order to make patch reviewing a
little easier.
v2: Coding style (Jani).
v3: Preparation for upstreaming.
v4: Fix MG_CLKTOP2_CORECLKCTL1 address and random typos (James).
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-3-paulo.r.zanoni@intel.com
Gen11/ICL onward ddb entry start/end mask is increased from 10 bits to
11 bits. This patch make changes to use proper mask for ICL+ during
hardware ddb value readout.
Changes since V1:
- Use _MASK & _SHIFT macro (James)
Changes since V2:
- use kernel type u8 instead of uint8_t
Changes since V3:
- Rebase
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-4-mahesh1.kumar@intel.com
ICL has two slices of DBuf, each slice of size 1024 blocks.
We should not always enable slice-2. It should be enabled only if
display total required BW is > 12GBps OR more than 1 pipes are enabled.
Changes since V1:
- typecast total_data_rate to u64 before multiplication to solve any
possible overflow (Rodrigo)
- fix where skl_wm_get_hw_state was memsetting ddb, resulting
enabled_slices to become zero
- Fix the logic of calculating ddb_size
Changes since V2:
- If no-crtc is part of commit required_slices will have value "0",
don't try to disable DBuf slice.
Changes since V3:
- Create a generic helper to enable/disable slice
- don't return early if total_data_rate is 0, it may be cursor only
commit, or atomic modeset without any plane.
Changes since V4:
- Solve checkpatch warnings
- use kernel types u8/u64 instead of uint8_t/uint64_t
Changes since V5:
- Rebase
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-3-mahesh1.kumar@intel.com
This patch adds support to start tracking status of DBUF slices.
This is foundation to introduce support for enabling/disabling second
DBUF slice dynamically for ICL.
Changes Since V1:
- use kernel type u8 over uint8_t
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-2-mahesh1.kumar@intel.com
These fields have been deprecated and moved in ICL+. Stop setting the
bits.
They have moved to GAMMA_MODE and CSC_MODE, respectively. This patch
is just to stop incorrectly setting bits in PLANE_COLOR_CTL while
we're waiting for the new replacement functionality to be done.
v2: Drop useless comment, and change !(GEN >= 11) to (GEN < 11). (Ville)
v3: No changes
v4 (from Paulo): Rebase.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-2-paulo.r.zanoni@intel.com
As the Geminilake firmware is now merged to linux-firmware.git
use MODUE_FIRMWARE to load the firmware.
This removes the error message in the dmesg log:
i915 0000:00:02.0: Direct firmware load for
i915/glk_dmc_ver1_04.bin failed with error -2
i915 0000:00:02.0: Failed to load DMC firmware
i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage:
https://01.org/linuxgraphics/downloads/firmware
and now shows that the firmware has correctly loaded:
[drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411044213.383-1-ianwmorrison@gmail.com
- Fix for black screen issues (FDO #104158 and #104425)
- A correction for wrongly applied display W/A
- Fixes for HDA codec interop issue (no audio) and too eager HW timeouts
* tag 'drm-intel-fixes-2018-04-26' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/fbdev: Enable late fbdev initial configuration
drm/i915: Use ktime on wait_for
drm/i915: Enable display WA#1183 from its correct spot
drm/i915/audio: set minimum CD clock to twice the BCLK
This was my bad, spec says that the name of this bit is
'Y-coordinate valid' but the values for it is:
0: Include Y-coordinate valid eDP1.4a
1: Do not include Y-coordinate valid eDP 1.4
So not setting it.
BSpec: 7713
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-4-jose.souza@intel.com
IGT tests could be improved with sink status, knowing for sure that
hardware have activate or exit PSR.
v3:
Reading i915_edp_psr_status was causing PSR to exit but now with
'drm/i915/psr: Prevent PSR exit when a non-pipe related register is
written' it is fixed.
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-3-jose.souza@intel.com
This will be helpful to debug what hardware is actually tracking
and causing PSR to exit.
BSpec: 7721
v4:
- Using _MMIO_TRANS2() in PSR_EVENT
- Cleaning events before printing
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-2-jose.souza@intel.com
Any write in any display register was causing HW to exit PSR,
masking it to allow more power savings. Writes to pipe related
registers will still cause HW to exit PSR.
This is already masked for PSR2.
It also do not break the Display WA #0884, writes to CURSURFLIVE
are still causing hardware to exit PSR. This was tested in CNL machine
by triggering a write to CURSURFLIVE when a debugfs was read by user.
Bspec: 7721 and 8042
v4: Checked that it do not breaks WA #0884 and added this information
to the commit message.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425212334.21109-1-jose.souza@intel.com
Even though we weren't injecting guilty requests to be reset, we could
still fall over the issue of resetting the same request too fast -- where
the GPU refuses to start again. (Although it is interesting to note that
reloading the driver is sufficient, suggesting that we could recover if
we delayed the setup after reset?) Continue to paper over the problem by
adding a small delay by waiting for the engine to idle between tests,
and ensure that the engines are idle before starting the idle tests.
v2: Replace single instance of 50 with a magic macro.
References: 028666793a ("drm/i915/selftests: Avoid repeatedly harming the same innocent context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411120346.27618-1-chris@chris-wilson.co.uk
For now, there's just the one link config selection, optimizing for slow
and wide link. No functional changes.
Keep the debug logging in the caller, to avoid duplication later on if
alternative link confing selection gets added.
v2: Improved commit message
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64848b76bf90d6ceecd7ec6b5add28531e0b1a41.1524730974.git.jani.nikula@intel.com
We call intel_dp_compute_rate() in intel_dp_compute_config() only to be
able to debug log the link_bw and rate_select parameters; we don't use
the parameters here for anything else. We call intel_dp_compute_rate()
again during link training where we actually need and use the
parameters.
Move the debug logging of link_bw and rate_select to
intel_dp_link_training_clock_recovery(), and clean up the extra
intel_dp_compute_rate() call and extra clutter from the already
overcrowded intel_dp_compute_config().
v2: Rewrote commit message (Rodrigo, Manasi)
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c5cf6a179e2d244eceb6bb80a792765d9efbee4f.1524730974.git.jani.nikula@intel.com
The majority of the engine state dumping is too voluminous to be useful
outside of a controlled setup, though a few do accompany severe errors.
Keep the debug dumps next to the errors, but hide the others behind a CI
compile flag. This becomes more useful when adding more dumps to latency
sensitive paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426103219.22181-1-chris@chris-wilson.co.uk
We can convert engine stats from a spinlock to seqlock to ensure interrupt
processing is never even a tiny bit delayed by parallel readers.
There is a smidgen bit more cost on the write lock side, and an extremely
unlikely chance that readers will have to retry a few times in face of
heavy interrupt load. But it should be extremely unlikely given how
lightweight read side section is compared to the interrupt processing
side, and also compared to the rest of the code paths which can lead into
it. Furthermore, writer is the ones doing the real, latency sensitive
work, while readers are only informative.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426074716.7352-1-tvrtko.ursulin@linux.intel.com
The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
qxl: 2 bug fixes (Gerd)
core: Don't use stale display info between HDMI hotplugs (Ville)
virtio: Fix guest spinning when request queue is full (Gerd)
Cc: Ondrej Jirman <megous@megous.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlrg2McACgkQlvcN/ahK
Bwp+Mwf+JyzD7ppH2jycUcvhs3Bu1NGShzDizinxwbZQvEXMwhHJ9F9yYEIGbLEI
GHmpZhRMPWEV7pBMXe1A53AsJ1TrmeAnNeEMjRUjTH2OEb9IWqo4tPM2UvrvI30n
zmoI/4h8gcsgUgQFX6NqKRxMX93NdcNc/Hp2IP/b3mFKlryeXnNNfMP7DtQAwysw
Fm6qQETbVa3osZ9Lqn8Yh3OorUpCJK7mjBPUD1j2xngaYQMnDyT9A2oDqmOzoNov
cXPrd423Iwr70YcEeapcWobxlTf4ge5fNNwpQ4a4ezXkWzVUeBFmt/7TuhdcbR23
biEysZQaG0nbdtWuL2KWV5SEE3tzyA==
=ZviK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-04-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
sun41: Fix regression for TBSA711 tablet (Ondrej)
qxl: 2 bug fixes (Gerd)
core: Don't use stale display info between HDMI hotplugs (Ville)
virtio: Fix guest spinning when request queue is full (Gerd)
Cc: Ondrej Jirman <megous@megous.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
* tag 'drm-misc-fixes-2018-04-25' of git://anongit.freedesktop.org/drm/drm-misc:
drm/edid: Reset more of the display info
drm/virtio: fix vq wait_event condition
qxl: keep separate release_bo pointer
qxl: fix qxl_release_{map,unmap}
Revert "drm/sun4i: add lvds mode_valid function"
A few fixes for 4.17.. thanks to Sean for helping pull together some
of the display related fixes while I was off in compute-land.
* tag 'drm-msm-fixes-2018-04-25' of git://people.freedesktop.org/~robclark/linux:
drm/msm: don't deref error pointer in the msm_fbdev_create error path
drm/msm/dsi: use correct enum in dsi_get_cmd_fmt
drm/msm: Fix possible null dereference on failure of get_pages()
drm/msm: Add modifier to mdp_get_format arguments
drm/msm: Mark the crtc->state->event consumed
drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY
drm/msm/dsi: check video mode engine status before waiting
drm/msm/dsi: check return value for video done waits
- Fix a hang on CZ boards with EDC enabled
- Fix hangs related to DP MST handling
- Fix a deadlock in irq handling in DC
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Check dc_sink every time in MST hotplug
drm/amd/display: Update MST edid property every time
drm/amd/display: Don't read EDID in atomic_check
drm/amd/display: Disallow enabling CRTC without primary plane with FB
drm/amd/display: Fix deadlock when flushing irq
drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
We're currently failing to reset everything in display_info.hdmi
which will potentially cause us to use stale information when
swapping monitors. Eg. if the user replaces a HDMI 2.0 monitor
with a HDMI 1.x monitor we will continue to think that the monitor
supports scrambling. That will lead to a black screen since the
HDMI 1.x monitor won't understand the scrambled signal.
Fix the problem by clearing display_info.hdmi fully. And while at
eliminate some duplicated code by calling drm_reset_display_info()
in drm_add_display_info().
Cc: stable@vger.kernel.org
Cc: Antony Chen <antonychen@qnap.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424130250.7028-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Antony Chen <antonychen@qnap.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Wait until we have enough space in the virt queue to actually queue up
our request. Avoids the guest spinning in case we have a non-zero
amount of free entries but not enough for the request.
Cc: stable@vger.kernel.org
Reported-by: Alain Magloire <amagloire@blackberry.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
qxl expects that list_first_entry(release->bos) returns the first
element qxl added to the list. ttm_eu_reserve_buffers() may reorder
the list though.
Add a release_bo field to struct qxl_release and use that instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180418054257.15388-3-kraxel@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
s/PAGE_SIZE/PAGE_MASK/
Luckily release_offset is never larger than PAGE_SIZE, so the bug has no
bad side effects and managed to stay unnoticed for years that way ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180418054257.15388-2-kraxel@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The reverted commit broke LVDS output on TBS A711 Tablet. That tablet
has simple-panel node that has fixed pixel clock-frequency that A83T
SoC used in the tablet can't generate exactly.
Requested rate is 52000000 and rounded_rate is calculated as 51857142.
It's close enough for it to work in practice, but with strict check
in the reverted commit, the mode is rejected needlessly in this case.
DT allows to specify a range of values for simple-panel/clock-frequency,
but driver doesn't respect that ATM. Given that TBS A711 is the single
user of sun4i-lvds driver, let's revert that commit for now, until
a better solution for the problem is found.
Also see: https://patchwork.kernel.org/patch/9446385/ for relevant
discussion (or search for "[RFC] drm/sun4i: rgb: Add 5% tolerance
to dot clock frequency check").
Fixes: e4e4b7ad50 ("drm/sun4i: add lvds mode_valid function")
Reported-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421045155.15332-1-megous@megous.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Interrupt handling in Gen11 is quite different from previous platforms.
v2: Rebased (Michel)
v3: Rebased with wiggle
v4: Rebased, remove TODO warning correctly (Daniele)
v5: Rebased, made gen11_gtiir const while at it (Michel)
v6: Rebased
v7: Adapt to the style currently in upstream
Suggested-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1524605995-22324-1-git-send-email-oscar.mateo@intel.com
Extended fix to: "Don't read EDID in atomic_check"
Fix issue of missing dc_sink in .mode_valid in hot plug routine.
Need to check dc_sink everytime in .get_modes hook after checking
edid, since edid is not getting removed in hot unplug but dc_sink
doesn't.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Extended fix to: "Don't read EDID in atomic_check"
Fix display property not observed in GUI display after hot plug.
Call drm_mode_connector_update_edid_property every time in
.get_modes hook, due to the fact that edid property is getting
removed from usermode ioctl DRM_IOCTL_MODE_GETCONNECTOR each time
in hot unplug.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.
Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The below commit
"drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"
introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.
Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.
This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.
Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When filling the ring to align the emit pointer to the next cacheline,
use memset64() rather than open-coding it. As we know that we always
have an even number of dwords, we can replace the dword loop with the
qword equivalent.
v2: s/0/MI_NOOP<<32 | MI_NOOP/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425123718.16366-1-chris@chris-wilson.co.uk
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131522.2460-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.
Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131455.2011-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131453.1961-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131445.1861-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131520.2409-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131508.2210-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131504.2159-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131443.1810-1-luc.vanoostenryck@gmail.com
If the initial fbdev configuration (intel_fbdev_initial_config()) runs
and there still no sink connected it will cause
drm_fb_helper_initial_config() to return 0 as no error happened (but
internally the return is -EAGAIN). Because no framebuffer was
allocated, when a sink is connected intel_fbdev_output_poll_changed()
will not execute drm_fb_helper_hotplug_event() that would trigger
another try to do the initial fbdev configuration.
So here allowing drm_fb_helper_hotplug_event() to be executed when there
is no framebuffer allocated and fbdev was not set up yet.
This issue also happens when a MST DP sink is connected since boot, as
the MST topology is discovered in parallel if
intel_fbdev_initial_config() is executed before the first sink MST is
discovered it will cause this same issue.
This is a follow-up patch of
https://patchwork.freedesktop.org/patch/196089/
Changes from v1:
- not creating a dump framebuffer anymore, instead just allowing
drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: frederik <frederik.schwan@linux.com> # 4.15.17
Tested-by: Ian Pilcher <arequipeno@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com
(cherry picked from commit df9e652174)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We use jiffies to determine when wait expires. However
Imre did find out that jiffies can and will do a >1
increments on certain situations [1]. When this happens
in a wait_for loop, we return timeout errorneously
much earlier than what the real wallclock would say.
We can't afford our waits to timeout prematurely.
Discard jiffies and change to ktime to detect timeouts.
v2: added bugzilla entry (Imre), added stable (Chris)
Reported-by: Imre Deak <imre.deak@intel.com>
References: https://lkml.org/lkml/2018/4/18/798 [1]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105771
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423113754.28424-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3085982c6b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
Otherwise, the SQ may skip some of the register writes, or shader waves may
be allocated where we don't expect them, so that as a result we don't actually
reset all of the register SRAMs. This can lead to spurious ECC errors later on
if a shader uses an uninitialized register.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Does what it says on the label, it's a little confusing debugging atomic
check failures otherwise.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411234302.2896-2-lyude@redhat.com
Instead of synchronously cancelling the timer and re-enabling it inside
the reset callbacks, keep the timer enabled and let it die on its next
wakeup if no longer required. This allows
intel_engine_reset_breadcrumbs() to be used from an atomic
(timer/softirq) context such as required for resetting an engine.
It also allows us to react better to the user poking around debugfs for
testing missed irqs.
v2: Tighten the order of del_timer_sync as the fake_irq timer
may trigger the hangcheck timer, and so we should cancel it first and
then cancel the hangcheck (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424142945.6787-1-chris@chris-wilson.co.uk
There is a potential execution path in which variable err is
returned without being properly initialized previously.
Fix this by initializing variable err to 0.
Addresses-Coverity-ID: 1468362 ("Uninitialized scalar variable")
Fixes: f4ecfbfc32 ("drm/i915: Check whitelist registers across resets")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131545.GA4053@embeddedor.com
Ville Syrjälä