The imx_pcm_dma_params_init_data() are no longer used since
commit c31da0b196 ("ASoC: imx-ssi: Remove unused driver"),
and the function is used to initialize some members of
"struct imx_dma_data", it's more readable to assign the value
directly, imx_pcm_dma_params_init_data is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220923090355.507648-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return val of snd_sof_dsp_read() right before polling the same
register is not used, so remove the redundant call.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the disabling of interrupts and powering down the DSP has been
abstracted, re-use the common ops for PM for MTL as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the IP-specific ops for disabling interrupts and powering down the
DSP in hda_suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW interrupts in the disable_interrupts op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable the IPC and SDW nterrupts in the disable_interrupts op for
cavs platforms.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for disabling DSP interrupts varies between different IP
versions.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use power_down_dsp op to differentiate power down sequences in platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For MTL platform, dsp cores need to go power down first then dsp subsystem
also need to set power down.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hda_power_down_dsp is set for power_down_dsp op for all HDA platforms.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP core power down sequences are different between cavs platforms and MTL.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220922213644.666315-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-rt5682 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-7-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-6-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The da7219 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8186-da7219 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-5-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DAPM widgets for headphones and headset microphone, with matching
switches, to allow toggling these paths based on the jack connection
status.
Note that differently from others (mt8192, mt8195 and mt8186-rt5682),
the widget here is named "Headphones" (with an 's'), since "Headphone
Switch" was already registered by da7219.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-4-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8195 ASoC driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 codec is able to distinguish between two event types:
headphone insertion/removal and headset microphone insertion/removal.
However, currently, the mt8192-mt6359 driver exposes a single kcontrol
for the headset jack, so userspace isn't able to differentiate between
the two events.
Add a definition for the headset jack pins, so that a separate jack
kcontrol is created for each one, allowing userspace to track and handle
them individually.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220922235951.252532-2-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 20aedafdf4 ("ASoC: wcd9335: add support to wcd9335 codec")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM
device mapping is obsolete nowadays. The maximum number of the simultaneously
usable PCM devices is equal to the HDMI codec converters.
Remove the extra PCM devices (beyond the detected converters) and force
the use of the dynamic PCM device allocation. The legacy code is removed.
I believe that all HDMI codecs have the jack sensing feature. Move the check
to the codec probe function and print a warning, if a codec without this
feature is detected.
[1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220922084017.25925-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value dsp_allocate_ports() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220922112846.236987-1-ye.xingchen@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These two missed IDs need to be added for dynamic selection of drivers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100014.27080-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few device specific fixes, nothing too large, and a new device
ID for a Dell laptop.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmMsRdEACgkQJNaLcl1U
h9Bd0gf/enmy6oEPGp20ZPEltavSm+rJLusK4bcjY31DiOniixeMEXIhr/NsdVji
o6F3mPJUeSAQBK0djCFDImPwDYxmBPrDEGnUqivguwTbdETh4iu+JPksO69pwf+b
nJMwl3AzRau3RiBgsPm5Ng85zy8RQ7Fd/Fftko1/eqm6ze2bvA5u4FWKgxOSjvq5
P2Lv9HRHICndSD1wNTa5IwaPgeS6E85sd4TVChQtVC5Vs/aXUl0rFAbBDlY2XsvC
a7/kTm4e/pvMXpQAoyZlk3zjAXRXnNTRGRNdte40YSByEs30gC8+g9mUBJBJgCCq
kQR2CgUGMUL6oanvPx9Ronqk268NEg==
=wfZR
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
A few device specific fixes, nothing too large, and a new device
ID for a Dell laptop.
Add IDs for RPL-M and RPL-PX
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No functionality change, just sort ADL PCI IDs by increasing order.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220922100254.27159-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF CI tests report failures with the following error thrown
kernel: es8316 i2c-ESSX8336:00: Unable to sync registers 0x0-0x1. -121
ES8336 only supports I2C read/write one byte a time, so we do need to
set the .use_single_read and .use_single_write flags to avoid this
sync issue.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: FRED OH <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220922095912.27010-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
add pcm_pointer callback for mt8186 to support read
host position from DSP
Signed-off-by: Chunxu Li <chunxu.li@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220921120239.31934-1-chunxu.li@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocated ida needs to be freed up if the IPC message fails since
next time when we try again to set up the widget we are going to try to
allocate another ID and given enough tries, we are going to run out of
unique IDs.
Fixes: 711d0427c7 ("ASoC: SOF: ipc4-topology: move ida allocate/free to widget_setup/free")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220921112751.9253-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is useful for the debugging to print also the used HDA codec NIDs
used for the given HDMI device. With the dynamic converter assignment
the converter NID is changed dynamically.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220921093349.82680-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just fix compile error without any logic changes.
sound/soc/sunxi/sun50i-dmic.c:62:1: error: ‘static’ is not at beginning of declaration [-Werror=old-style-declaration]
62 | const static struct dmic_rate dmic_rate_s[] = {
| ^~~~~
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220921033819.2188233-1-zengheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset was submitted earlier in April 2022 as part of the
"ASoC: SOF: add INTEL_IPC4 plumbing" series. As requested the SKL/KBL
support is moved to a different series.
This update adds minor style fixes and the ops that were missing at
the time. SKL and KBL daily tests have been running for several months
and helped identify missing sequences in the SOF driver for HDaudio
links, or platform differences that the driver did not account for
(number of pipelines, etc).
Note that this capability is not recommended for any distribution, it
is ONLY for SOF IPC4 CI tests on HDaudio devices, we will not extend
this SKL/KBL support for I2S devices based on ES8336 or Chromebooks
which are ONLY supported by the AVS driver.
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
This series consists of
1.Make ACP core code generic for newer SOC transition
2.Add support for Rembrandt plaform
3.Adding amd HS functionality to the sof core
4.increase SRAM inbox and outbox size to 1024
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
Another model from ASUS and Lenovo have been identified that
don't include anything in ACPI tables to indicate they require the
ACP6x DMIC driver to be loaded.
This series adds them both to the quirk list.
After commit bfc5e8b860 ("ASoC: rt5682s: Reduce coupling of
Micbias and Vref2 settings"), the return of rt5682s_probe()
can be simplified. No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220920151413.3455255-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
2 patches from Rander required to enable mixing usages with multiple
pipelines.
Lenovo Yoga Slim 7 Pro X has an ACP DMIC that isn't specified in the
ASL or existing quirk list. Add it to the quirk table to let DMIC
work on these systems.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216299
Tested-by: Sebastian S <iam@decentr.al>
Reported-and-tested-by: Travis Glenn Hansen <travisghansen@yahoo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASUS Zenbook S 13 OLED (UM5302TA) needs this quirk to get the built-in
microphone working properly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216270
Signed-off-by: Xiaoyan Li <lxy.lixiaoyan@gmail.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220920201436.19734-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increase inbox and outbox mailbox size from 512 to 1024 to
support thirdparty DTS integration ipc tx/rx messages communication.
This is done through firmware window get info.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-5-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add I2S HS control instance to the sof core.
This will help the amd topology to use the I2S HS Dai.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pci driver and platform driver to enable SOF support on ACP6x
architecture based Rembrandt platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-3-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer AMD SOC differs slightly in terms of few registers offset and
configuration. Add offsets into chip_info struct to make core ACP
code more generic and resusable on newer SOC.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220913144319.1055302-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We fixed the bug introduced by the patch for managing the shared
clocks at the commit 809f44a0cc ("ALSA: usb-audio: Clear fixed clock
rate at closing EP"), but it was merely a workaround. By this change,
the clock reference rate is cleared at each EP close, hence the still
remaining EP may need a re-setup of rate unnecessarily.
This patch introduces the proper refcounting for the clock reference
object so that the clock setup is done only when needed.
Fixes: 809f44a0cc ("ALSA: usb-audio: Clear fixed clock rate at closing EP")
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Link: https://lore.kernel.org/r/20220920181126.4912-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a second attempt to fix the bug appearing on Android with the
recent kernel; the first try was ff878b408a and reverted at commit
79764ec772.
The details taken from the v1 patch:
One of the former changes for the endpoint management was the more
consistent setup of endpoints at hw_params.
snd_usb_endpoint_configure() is a single function that does the full
setup, and it's called from both PCM hw_params and prepare callbacks.
Although the EP setup at the prepare phase is usually skipped (by
checking need_setup flag), it may be still effective in some cases
like suspend/resume that requires the interface setup again.
As it's a full and single setup, the invocation of
snd_usb_endpoint_configure() includes not only the USB interface setup
but also the buffer release and allocation. OTOH, doing the buffer
release and re-allocation at PCM prepare phase is rather superfluous,
and better to be done only in the hw_params phase.
For those optimizations, this patch splits the endpoint setup to two
phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(),
to be called from hw_params and from prepare, respectively.
Note that this patch changes the driver operation slightly,
effectively moving the USB interface setup again to PCM prepare stage
instead of hw_params stage, while the buffer allocation and such
initializations are still done at hw_params stage.
And, the change of the USB interface setup timing (moving to prepare)
gave an interesting "fix", too: it was reported that the recent
kernels caused silent output at the beginning on playbacks on some
devices on Android, and this change casually fixed the regression.
It seems that those devices are picky about the sample rate change (or
the interface change?), and don't follow the too immediate rate
changes.
Meanwhile, Android operates the PCM in the following order:
- open, then hw_params with the possibly highest sample rate
- close without prepare
- re-open, hw_params with the normal sample rate
- prepare, and start streaming
This procedure ended up the hw_params twice with different rates, and
because the recent kernel did set up the sample rate twice one and
after, it screwed up the device. OTOH, the earlier kernels didn't set
up the USB interface at hw_params, hence this problem didn't appear.
Now, with this patch, the USB interface setup is again back to the
prepare phase, and it works around the problem automagically.
Although we should address the sample rate problem in a more solid
way in future, let's keep things working as before for now.
***
What's new in the take#2 patch:
- The regression caused by the v1 patch (bko#216500) was due to the
missing check of need_setup flag at hw_params. Now the check is
added, and the snd_usb_endpoint_set_params() call is skipped when
the running EP is re-opened.
- There was another bug in v1 where the clock reference rate wasn't
updated at hw_params phase, which may lead to a lack of the proper
hw constraints when an application doesn't issue the prepare but
only the hw_params call. This patch fixes it as well by tracking
the clock rate change in the prepare callback with a new flag
"need_update" for the clock reference object, just like others.
- The configure_endpoints() are simplified and folded back into
snd_usb_pcm_prepare().
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Fixes: ff878b408a ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Reported-by: chihhao chen <chihhao.chen@mediatek.com>
Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com
Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920181106.4894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cppcheck warning:
sound/soc/sof/ipc4-topology.c:1533:12: style: Variable 'pipeline' is
assigned a value that is never used. [unreadVariable]
pipeline = pipe_widget->private;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220920145405.2089147-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If multiple pipeline are mixed into one, we can't unprepare
the widget used by other pipelines. This patch checks use_count
to address this case.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback can't work after the first try sometimes. The reason is that
some widgets don't have ipc_unprepare ops and driver will jump
to sink_prepare so miss to set prepare state to false. Next
time these widgets will not be prepared and it will result to
error with different format of audio file since the last setting
is not applicable.
This patch makes sure that widget prepare state will be cleared
to false when it is unprepared.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920150107.2090695-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ops and ops_init for SKL and KBL.
Tested on Dell XPS-13-9350 and KBL NUC.
Note: currently only SOF_IPC4_MTRACE_INTEL_CAVS_2 type is supported by
the ipc4-mtrace driver, which is used by CAVS 2.x platforms (ICL, TGL,
ADL) and ACE (MTL).
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds
support for SkyLake and KabyLake boot and descriptors
used when probing the PCI driver.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
upcoming support of IPC v4, and hence the Intel closed-source
firmware, it's time to re-add this capability.
The SKL ops will be added in the next patch.
Tested with the IPC4 and closed-source firmware on Dell XPS 9350
and KBL NUC with HDaudio codecs. The SSP and DMIC interfaces are not
supported at this time.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the SkyLake and KabyLake code loader on
top of the SOF IPC4.
The work was initially contributed in 2018 by Liam Girdwood and Zhu
Yingjiang, and abandoned due to firmware signature issues. With the
existing support of IPC v4, it's time to re-add this capability.
This patch uses the newly added FSR (Firmware State Register)
definitions for DSP state handling and targeting, ass well as new
state definition for SKL which indicates that the firmware has been
started (similar to FW_ENTERED on other platforms).
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation of the IPCv4 IPC support, this patch adds exposes
two functions required by the SKL/KBL boot and code loader.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220920131700.133103-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 32eeeed963.
As the fix for endpoint configuration split is reverted at next, do
another revert here for a clean patch application.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit ff878b408a.
Unfortunately the recent fix seems bringing another regressions with
PulseAudio / pipewire, at least for Steinberg and MOTU devices.
As a temporary solution, do a straight revert. The issue for Android
will be revisited again later by another different fix (if any).
Fixes: ff878b408a ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return the value inb() directly instead of storing it in another redundant
variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220920064605.215318-1-ye.xingchen@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Martin Povišer <povik+lin@cutebit.org>:
there's a CS42L83 headphone jack codec found in Apple computers (in the
recent 'Apple Silicon' ones as well as in earlier models, one example
[1]). The part isn't publicly documented, but it appears almost
identical to CS42L42, for which we have a driver in kernel. This series
adapts the CS42L42 driver to the new part, and makes one change in
anticipation of a machine driver for the Apple computers.
Patch 1 adds new compatible to the cs42l42 schema.
Patches 2 to 7 are taken from Richard's recent series [2] adding
soundwire support to cs42l42. They are useful refactorings to build on
in the later patches, and also this way our work doesn't diverge.
(I fixed missing free_irq path in cs42l42_init, did
s/Soundwire/SoundWire/ in changelogs, rebased.)
Patch 8 exports some regmap-related symbols from cs42l42.c so they can
be used to create cs42l83 regmap in cs42l83-i2c.c later.
Patch 9 is the cs42l83 support proper.
Patch 10 implements 'set_bclk_ratio' on the cs42l42 core. This will be
called by the upcoming ASoC machine driver for 'Apple Silicon' Macs.
(We have touched on this change to be made in earlier discussion, see
[3] and replies.)
Patch 11 brings cs42l42-i2c.c in sync with cs42l83-i2c.c on
dev_err_probe() usage.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset solves a known issue with ES8336 platforms wrt MCLK
selection. Most of the devices use the MCLK0 signal, but some devices
do use the MCLK1 signal.
The MCLK is defined in the topology, it would be a nightmare to
generate more topology files just for one MCLK difference. With a
minor extension to the intel-nhlt library, the MCLK information can be
found by parsing the NHLT table, and we can override the mclk_id at
boot time.
The only known issues for this platform remain the detection of GPIO
and microphone connections, currently only possible with manual
quirks.
Thanks to Eugene J. Markow for testing this patchset.
The NHLT is already used to determine which SSP is connected to an
audio codec, we can parse the SSP blob to get the mclk_id from NHLT.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF topologies hard-code the MCLK used for SSP connections. That was a
bad idea in hindsight, this information should really come from BIOS
and/or machine driver.
This patch introduces a helper to scan all SSP endpoints connected to
a codec, and all formats to see what MCLK is used. When BIT(0) of the
mdivc offset if set in the SSP blob, MCLK0 is used, and likewise when
BIT(1) is set MCLK1 is used.
The case where both MCLKs are used is possible but has never been seen
in practice so should be treated as an error by the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220919115350.43104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_pcm_runtime has playback/capture_widget for Codec2Coddec.
The naming is unclear.
This patch names it as c2c_widget and uses array.
struct snd_soc_pcm_runtime {
...
=> struct snd_soc_dapm_widget *playback_widget;
=> struct snd_soc_dapm_widget *capture_widget;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmfqv9mk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By construction a host and link DMA are always decoupled. This
decoupling happens in the assign() phase. There's no point in checking
if the two parts are decoupled, this is by-design always-true.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_hdac_ext_stream_release() routine uses the bus reg_lock, but
releases it before calling snd_hdac_stream_release() where the bus
reg_lock is taken again.
This creates a timing window where the link stream release could test
an invalid 'opened' boolean status and fail to recouple the host and
link parts.
Fix by exposing a locked version of snd_hdac_stream_release() and use
it without releasing the spinlock.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The logic is needlessly complicated, the basic rule is:
The host streams can be found by checking the 'opened' boolean.
The link streams can be found by checking the 'link_locked' boolean.
Once a stream is found, it can be unconditionally decoupled. The
snd_hdac_ext_stream_decouple_locked() routine will make sure the
register status is modified as needed and the 'decoupled' boolean set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure there's no ambiguity on layering with the appropriate prefix
added.
Pure rename, no functionality changed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are no external users of this helper, move to static and remove
sympol export. No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code in this library is far from self-explanatory, hopefully this
state diagram reverse-engineered from the code will help others
understand the expected transitions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper has no users outside of hdac_stream.c. External users
should only use snd_hdac_stream_start() and snd_hdac_stream_stop().
No functional change beyond making the function static and removing
the symbol export.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Track the converters handling the silent stream using a new
variable to avoid mixing of the open/close and silent stream
use. This change ensures the proper allocation of the converters.
Fixes: 5f80d6bd2b ("ALSA: hda/hdmi: Fix the converter reuse for the silent stream")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919135444.3554982-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Multiple maintainers have told us to start using the tracing
subsystem. Wish granted, this patchset suggested by Noah Klayman
removes a number of verbose and arguably useless dev_dbg or dev_vdbg
logs.
Beyond higher efficiency and less intrusive instrumentation, the use
of bpftrace scripts bring new functionality and helps gather
statistics on usage count on a running system, see how we can get
information on suspend/resume times with [1]
[1] https://github.com/thesofproject/sof-test/blob/main/kernel_tracing/bpftrace_scripts/suspend_resume_time.bt
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe6157 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Intel-based platforms rely on a topology file that hard-codes the
use of MCLK0. This is incorrect in 10% of the cases. Rather than
generating yet another set of topology files, this patch adds a kernel
module parameter to override the topology value.
In hindsight, we should never have allowed mclks to be specified in
topology, this is a hardware-level information that should not have
been visible in the topology.
Future patches will try to set this value automagically, e.g. by
parsing the NHLT content.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSP count is incorrect for TGL and MTL devices, the SSP count is
limited to 3 (I2SPC parameter in the Integration HAS).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919115350.43104-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver wants to know the bit rate on the serial bus and takes that
to be the value set by 'set_sysclk'. The 'set_bclk_ratio' op is a better
fit for figuring out the clocking parameters of the serial bus, so
implement that and give it precedence over the prior methods.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-11-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS42L83 part is a headphone jack codec found in recent Apple
machines. It is a publicly undocumented part but as far as can be told
it is identical to CS42L42 except for two points:
* The chip ID is different.
* Of those registers for which we have a default value in the existing
CS42L42 kernel driver, one register (MCLK_CTL) differs in its reset
value on CS42L83.
To address those two points (and only those), add to the CS42L42 driver
a separate CS42L83 front.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-10-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Export the regmap callbacks for indicating readable/volatile registers,
also the range structure, to the CS42L42 core namespace. This is in
advance of reusing these bits in a CS42L83 driver frontend.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-9-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Split the I2C bus driver definition and probe()/remove() into a
separate module so that a SoundWire build of CS42L42 support does
not have a spurious dependency on I2C.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-8-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass pointers to snd_soc_component_driver and snd_soc_dai_driver
objects into cs42l42_common_probe().
This is in preparation for adding SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-7-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On SoundWire the system resume cannot restore registers until the
host controller has re-enumerated the peripheral.
This patch splits cs42l42_resume() into two functions, one to
power up and the other to restore registers, ready for adding
SoundWire support.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-6-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To prepare for adding SoundWire the probe must be split into three
parts:
1) The bus-specific probe
2) Common bus-agnostic probe steps
3) Initialization of the peripheral registers
Step (3) must be separate because on SoundWire devices the probe must
enable power supplies and release reset so that the peripheral can be
enumerated by the bus, but it isn't possible to access registers until
enumeration has completed.
The call to devm_snd_soc_register_component() must be done at stage (2)
so that it can EPROBE_DEFER if necessary. In SoundWire systems stage (3)
is not a probe event so a deferral at this stage would not result in
re-probing dependencies.
A new init_done flag indicates that the chip has been identified and
initialized. This is used to prevent cs42l42_remove(), cs42l42_suspend(),
cs42l42_restore() and cs42l42_irq_thread() from attempting register
accesses if the chip was not successfully initialized. Although this
cannot happen on I2C, because the entire probe would fail, it is
possible on SoundWire if probe succeeds but the cs42l42 is never
enumerated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for splitting cs42l42_i2c_probe() into multiple functions
replace use of &i2c_client->dev with cs42l42->dev. This reduces diff
clutter in the patch that splits the function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the handling of bitclock frequency by keeping all the logic
in cs42l42_pcm_hw_params(), which then simply passes the frequency as
an argument to cs42l42_pll_config().
The previous code had become clunky as a legacy of earlier versions of
the clock handling. The logic was split across cs42l42_pcm_hw_params()
and cs42l42_pll_config(), with the params-derived bclk stashed in
struct cs42l42_private only to pass it to cs42l42_pll_config().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220915094444.11434-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At present, succesfull probing of H3 Codec results in an error
debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
This is caused by a directory name conflict between codec
components. Fix it by setting debugfs_prefix for the CPU DAI
component.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://lore.kernel.org/r/20220913212256.151799-2-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062630.154277-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'PLLB' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-3-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented
by 'I2S1' dapm widget.
The coupling risk exists, so this patch fixes it.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some parts of rt5682s CCF function are implemented by
'MICBIAS' and 'Vref2' dapm widgets.
There is a risk of causing not expected behavior if we
mix using dapm and CCF operations in machine specific code.
This patch reduces the coupling.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220913025658.5005-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062415.153659-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In some Chrome platforms if OEM's use their own string as SYS_VENDOR than
"Google", it leads to firmware load failure from intel/sof/community path.
Hence, changing SYS_VENDOR to PRODUCT_FAMILY in which "Google" is used
as common prefix and is supported in all Chrome platforms.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919114429.42700-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Almost all default rtd->xxx are setup at soc_new_pcm_runtime()
which is sub-function of snd_soc_add_pcm_runtime() (A).
But "rtd->pmdown_time" is setup at soc_init_pcm_runtime() (B).
It is very random timing setup. This patch setup it at (A),
same as other rtd->xxx.
static int snd_soc_bind_card(...)
{
...
for_each_card_prelinks(...) {
(A) ret = snd_soc_add_pcm_runtime(...);
...
}
...
for_each_card_rtds(...) {
(B) ret = soc_init_pcm_runtime(...);
...
}
...
}
One note is that current topology/intel are directly calling
snd_soc_add_pcm_runtime() (A) without calling soc_init_pcm_runtime() (B).
This means, its "rtd->pmdown_time settings" was 0, but will have default
value by this patch.
"rtd->pmdown_time settings" will be used at
snd_soc_runtime_ignore_pmdown_time(). This patch adds
"ignore_pmdown_time" to these driver to keep compatibility.
bool snd_soc_runtime_ignore_pmdown_time(...)
{
...
=> if (!rtd->pmdown_time || rtd->dai_link->ignore_pmdown_time)
return true;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yhxmjjd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an ALSA event on the RX Sample Rate controller upon the dpll locked
interrupt, making it possible for audio applications to monitor changes
in the hardware.
Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220912105407.3157868-1-robert.rosengren@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220916062027.152815-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062549.154114-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062234.153275-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220916061906.152434-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062511.153962-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220916062320.153456-1-ye.xingchen@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:
This patchset adds support for SC8280XP SoC machine driver.
First patch moves some of the commonly used code to common from sm8250 machine driver
and the follow on code adds minimal support for sc8280xp.
Currently this driver is only tested with SmartSpeakers and Headset
on Lenovo Thinkpad X13s.
Support for sm8450 is tested and I will post the patches soon.
Add machine driver for sc8280xp SoC.
This intial supports only includes WSA883x Speakers and WCD938x based headset.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SM8450 machine driver code can be reused across multiple Qualcomm SoCs,
At least another 2 of them for now (SM8450 and SC8250XP).
Move some of the common SoundWire stream specific code to common file
so that other drivers can use it instead of duplication.
This patch is to prepare the common driver to be able to add new SoCs support
with less dupication.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom_snd_parse_of depends on ASoC EXPORT_SYMBOL_GPL functions,
so make qcom_snd_parse_of and EXPORT_SYMBOL_GPL.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220916132427.1845-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces dev_vdbg with tracepoints in new ipc4-loader code.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch removes unneeded dev_vdbg calls and replaces remaining ones
with tracepoints to reduce overhead and enable use of trace collection
and analysis tools.
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch replaces all dev_vdbg calls with tracepoints to reduce
overhead and enable use of trace collection and analysis tools.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel HDaudio controller relies on a single interrupt line which
wire-ORs multiple interrupt sources, such as stream, IPC, SoundWire and
wakes. This patch adds the ability to trace each event occurrence.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enables tracking of use_count during widget setup and free routines.
Useful for debugging unbalanced use_counts during suspend/resume.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Noah Klayman <noah.klayman@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220919122108.43764-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the change introduced by 6ac246105b, the calibration can only be
done after the codec probe (but questionable if it is working since
203A_AMP_EN is 0) or when the codec is powered up for audio use, in other
cases "AMP is not ready to run calibration" is printed.
This changes how this worked before the patch: the codec was force powered
on for the duration of the calibration readout, then shut down.
So, if a calibration was asked when the codec was active, it would have
powered it down?
To correct the calibration logic: check if the codec is powered on and if
it is not then enable it, do the readout and put it back to disabled.
Do this while keeping the dapm locked to avoid interfering with normal
operation via DAPM.
Fixes: 6ac246105b ("ASoC: max98390: Remove unnecessary amp on/off conrtol")
Reported-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220916111349.4433-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similair to the HP OMEN 15, the HP OMEN 16 also needs
ALC285_FIXUP_HP_MUTE_LED for the mute LED to work.
[ Rearranged the entry in PCI SSID order by tiwai ]
Signed-off-by: Daniel Houldsworth <dhould3@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220918171300.24693-1-dhould3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
Add a quirk to use the same DAC pairs as the G14.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack
[ Fixed the position in the quirk table by tiwai ]
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few entries have been mistakenly inserted in wrong positions without
considering the SSID ordering. Place them at right positions.
Fixes: b7557267c2 ("ALSA: hda/realtek: Add quirk for ASUS GA402")
Fixes: 94db9cc8f8 ("ALSA: hda/realtek: Add quirk for ASUS GU603")
Fixes: 739d0959fb ("ALSA: hda: Add quirk for ASUS Flow x13")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix in commit 6392dcd1d0 ("ALSA: usb-audio: Register card
at the last interface") tried to delay the card registration until the
last found interface is probed. It assumed that the probe callback
gets called for those later interfaces, but it's not always true; as
the driver loops over the descriptor and probes the matching ones,
it's not separately called via multiple probe calls. This results in
the missing card registration, i.e. no sound device.
For addressing this problem, replace the check whether the last
interface is processed with usb_interface_claimed() instead of the
comparison with the probe interface number.
Fixes: 6392dcd1d0 ("ALSA: usb-audio: Register card at the last interface")
Link: https://lore.kernel.org/r/20220915085947.7922-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In eukrea_tlv320_probe(), we need to hold the reference returned
from of_find_compatible_node() which has increased the refcount
and then call of_node_put() with it when done.
Fixes: 66f232908d ("ASoC: eukrea-tlv320: Add DT support.")
Co-authored-by: Kelin Wang <wangkelin2023@163.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220914134354.3995587-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use regmap_read_poll_timeout to poll I2S_CLR.
It also fixes the 'rockchip-i2s ff070000.i2s; fail to clear' when
the read of I2S_CLR exceeds the retry limit.
Fixes: 0ff9f8b9f5 ("ASoC: rockchip: i2s: Fix error code when fail to read I2S_CLR")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220914031234.2250298-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 2848d34c3b ("ASoC: tas2562: Fix mute/unmute") the
following build warning is seen:
sound/soc/codecs/tas2562.c:442:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Fix the warning by returning the 'ret' variable.
Fixes: 2848d34c3b ("ASoC: tas2562: Fix mute/unmute")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220913231706.516849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the
previous Precision 5560. I replicated that patch onto this one, and can
confirm that the audio is much better (the woofers are now working);
I've tested it on my Dell Precision 5570.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658ca ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case when a codec device is probed before codec analog
controls, snd_soc_register_card() returns -EPROBE_DEFER, resulting in
a misleading error message
sun4i-codec 1c22c00.codec: Failed to register our card
even if the device is probed successfully later. Use dev_err_probe()
to demote the above error to a debug message.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220911145713.55199-1-mike.rudenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In configurations with CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=n,
gcc warns about an unused variable:
sound/soc/intel/skylake/skl.c: In function ‘probe_codec’:
sound/soc/intel/skylake/skl.c:729:18: error: unused variable ‘skl’ [-Werror=unused-variable]
struct skl_dev *skl = bus_to_skl(bus);
^~~
cc1: all warnings being treated as errors
Fixes: 3fd63658ca ("ASoC: Intel: Drop hdac_ext usage for codec device creation")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220822035133.2147381-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixup this warning when CONFIG_PM not defined
linux/sound/soc/codecs/ak4458.c:631:13: error: 'ak4458_reset' defined but\
not used [-Werror=unused-function]
631 | static void ak4458_reset(struct ak4458_priv *ak4458, bool active)
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e9e7df8899 ("ASoC: ak4458: Remove component probe() and remove()")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663057594-29141-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Gaosheng Cui