If the perf_event has PERF_SAMPLE_CALLCHAIN, BPF can use it for stack trace.
The problematic cases like PEBS and IBS already handled in the PMU driver and
they filled the callchain info in the sample data. For others, we can call
perf_callchain() before the BPF handler.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908214104.3851807-2-namhyung@kernel.org
So that it can call perf_callchain() only if needed. Historically it used
__PERF_SAMPLE_CALLCHAIN_EARLY but we can do that with sample_flags in the
struct perf_sample_data.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908214104.3851807-1-namhyung@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmMeQ2keHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGYRMH+gLNHiGirGZlm2GQ
tKaZQUy7MiXuIP0hGDonDIIIAmIVhnjm9MDG8KT4W8AvEd7ukncyYqJfwWeWQPhP
4mZcf6l3Z8Ke+qiaFpXpMPCxTyWcln1ox0EoNx2g9gdPxZntaRuuaTQVljUfTiey
aVPHxve8ip3G7jDoJnuLSxESOqWxkb8v/SshBP1E5bF5BZ+cgZRqq7FNigFqxjbk
wF29K09BVOPjdgkSvY/b0/SnL5KlSdMAv+FrPcJNGivcdIPgf/qJks5cI2HRUo7o
CpKgbcLorCVyD+d+zLonJBwIy3arbmKD8JqYnfdTSIqVOUqHXWUDfeydsH32u1Gu
lPSI2Hw=
=7LTL
-----END PGP SIGNATURE-----
Merge 6.0-rc5 into driver-core-next
We need the driver core and debugfs changes in this branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In account_global_scheduler_latency(), when we don't find the matching
latency_record we try to select one which is unused in
latency_record[MAXLR], but the condition will skip the last one.
if (i >= MAXLR-1)
Fix that.
Link: https://lkml.kernel.org/r/20220903135233.5225-1-wuchi.zero@gmail.com
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Print the machine hardware name (UTS_MACHINE) in /proc/sys/kernel/arch.
This helps people who debug kernel with initramfs with minimal environment
(i.e. without coreutils or even busybox) or allow to open sysfs file
instead of run 'uname -m' in high level languages.
Link: https://lkml.kernel.org/r/20220901194403.3819-1-pvorel@suse.cz
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Sterba <dsterba@suse.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The code to parse option string "schedule/sleep/kvm" of cmdline in
function profile_setup is redundant, so simplify that.
Link: https://lkml.kernel.org/r/20220901003121.53597-1-wuchi.zero@gmail.com
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foudation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If register_kprobe() fails, the new attr is not added to the list yet, so
it should call fei_attr_free() intstead.
Link: https://lkml.kernel.org/r/20220826073337.2085798-3-yangyingliang@huawei.com
Fixes: 4b1a29a7f5 ("error-injection: Support fault injection framework")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor the error handling of register_kprobe() to improve readability.
No functional change.
Link: https://lkml.kernel.org/r/20220826073337.2085798-2-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Link: https://lkml.kernel.org/r/20220826073337.2085798-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old
in cpu_wait_death and cpu_report_death. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg). Also, atomic_try_cmpxchg
implicitly assigns old *ptr value to "old" when cmpxchg fails, enabling
further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20220825145603.5811-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in
task_work_add, task_work_cancel_match and task_work_run. x86 CMPXCHG
instruction returns success in ZF flag, so this change saves a compare
after cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_try_cmpxchg implicitly assigns old *ptr value to "old"
when cmpxchg fails, enabling further code simplifications.
The patch avoids extra memory read in case cmpxchg fails.
Link: https://lkml.kernel.org/r/20220823152632.4517-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() is being deprecated in favor of kmap_local_page().
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap's pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
With kmap_local_page() the mappings are per thread, CPU local, can take
page faults, and can be called from any context (including interrupts).
It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore,
the tasks can be preempted and, when they are scheduled to run again, the
kernel virtual addresses are restored and are still valid.
Since its use in kexec_core.c is safe everywhere, it should be preferred.
Therefore, replace kmap() with kmap_local_page() in kexec_core.c.
Tested on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
Link: https://lkml.kernel.org/r/20220821182519.9483-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Attempting to get a crash dump out of a debug PREEMPT_RT kernel via an NMI
panic() doesn't work. The cause of that lies in the PREEMPT_RT definition
of mutex_trylock():
if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES) && WARN_ON_ONCE(!in_task()))
return 0;
This prevents an nmi_panic() from executing the main body of
__crash_kexec() which does the actual kexec into the kdump kernel. The
warning and return are explained by:
6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
[...]
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Furthermore, grabbing the lock isn't NMI safe, so do away with kexec_mutex
and replace it with an atomic variable. This is somewhat overzealous as
*some* callsites could keep using a mutex (e.g. the sysfs-facing ones
like crash_shrink_memory()), but this has the benefit of involving a
single unified lock and preventing any future NMI-related surprises.
Tested by triggering NMI panics via:
$ echo 1 > /proc/sys/kernel/panic_on_unrecovered_nmi
$ echo 1 > /proc/sys/kernel/unknown_nmi_panic
$ echo 1 > /proc/sys/kernel/panic
$ ipmitool power diag
Link: https://lkml.kernel.org/r/20220630223258.4144112-3-vschneid@redhat.com
Fixes: 6ce47fd961 ("rtmutex: Warn if trylock is called from hard/softirq context")
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec, panic: Making crash_kexec() NMI safe", v4.
This patch (of 2):
Most acquistions of kexec_mutex are done via mutex_trylock() - those were
a direct "translation" from:
8c5a1cf0ad ("kexec: use a mutex for locking rather than xchg()")
there have however been two additions since then that use mutex_lock():
crash_get_memory_size() and crash_shrink_memory().
A later commit will replace said mutex with an atomic variable, and
locking operations will become atomic_cmpxchg(). Rather than having those
mutex_lock() become while (atomic_cmpxchg(&lock, 0, 1)), turn them into
trylocks that can return -EBUSY on acquisition failure.
This does halve the printable size of the crash kernel, but that's still
neighbouring 2G for 32bit kernels which should be ample enough.
Link: https://lkml.kernel.org/r/20220630223258.4144112-1-vschneid@redhat.com
Link: https://lkml.kernel.org/r/20220630223258.4144112-2-vschneid@redhat.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The promotion hot threshold is workload and system configuration
dependent. So in this patch, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit. If the
hint page fault latency of a page is less than the hot threshold, we will
try to promote the page, and the page is called the candidate promotion
page.
If the number of the candidate promotion pages in the statistics interval
is much more than the promotion rate limit, the hot threshold will be
decreased to reduce the number of the candidate promotion pages.
Otherwise, the hot threshold will be increased to increase the number of
the candidate promotion pages.
To make the above method works, in each statistics interval, the total
number of the pages to check (on which the hint page faults occur) and the
hot/cold distribution need to be stable. Because the page tables are
scanned linearly in NUMA balancing, but the hot/cold distribution isn't
uniform along the address usually, the statistics interval should be
larger than the NUMA balancing scan period. So in the patch, the max scan
period is used as statistics interval and it works well in our tests.
Link: https://lkml.kernel.org/r/20220713083954.34196-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patch as
the page promotion rate limit mechanism.
The number of the candidate pages to be promoted to the fast memory node
via NUMA balancing is counted, if the count exceeds the limit specified by
the users, the NUMA balancing promotion will be stopped until the next
second.
A new sysctl knob kernel.numa_balancing_promote_rate_limit_MBps is added
for the users to specify the limit.
Link: https://lkml.kernel.org/r/20220713083954.34196-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: osalvador <osalvador@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Verifier logic to confirm that a callback function returns 0 or 1 was
added in commit 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper").
At the time, callback return value was only used to continue or stop
iteration.
In order to support callbacks with a broader return value range, such as
those added in rbtree series[0] and others, add a callback_ret_range to
bpf_func_state. Verifier's helpers which set in_callback_fn will also
set the new field, which the verifier will later use to check return
value bounds.
Default to tnum_range(0, 0) instead of using tnum_unknown as a sentinel
value as the latter would prevent the valid range (0, U64_MAX) being
used. Previous global default tnum_range(0, 1) is explicitly set for
extant callback helpers. The change to global default was made after
discussion around this patch in rbtree series [1], goal here is to make
it more obvious that callback_ret_range should be explicitly set.
[0]: lore.kernel.org/bpf/20220830172759.4069786-1-davemarchevsky@fb.com/
[1]: lore.kernel.org/bpf/20220830172759.4069786-2-davemarchevsky@fb.com/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220908230716.2751723-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.
As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:
[67414] STRUCT ff_device size=120 vlen=12
effect_owners type_id=67434 bits_offset=960 Member exceeds struct_size
Fix this by changing the type of last_member_type_id to u32.
Fixes: a0791f0df7 ("bpf: fix BTF limits")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/r/20220910110120.339242-1-oss@lmb.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit 27ae7997a6 ("bpf: Introduce BPF_PROG_TYPE_STRUCT_OPS")
there has existed bpf_verifier_ops:btf_struct_access. When
btf_struct_access is _unset_ for a prog type, the verifier runs the
default implementation, which is to enforce read only:
if (env->ops->btf_struct_access) {
[...]
} else {
if (atype != BPF_READ) {
verbose(env, "only read is supported\n");
return -EACCES;
}
[...]
}
When btf_struct_access is _set_, the expectation is that
btf_struct_access has full control over accesses, including if writes
are allowed.
Rather than carve out an exception for each prog type that may write to
BTF ptrs, delete the redundant check and give full control to
btf_struct_access.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/962da2bff1238746589e332ff1aecc49403cd7ce.1662568410.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the percpu freelist code, it is a common pattern to iterate over
the possible CPUs mask starting with the current CPU. The pattern is
implemented using a hand rolled while loop with the loop variable
increment being open-coded.
Simplify the code by using for_each_cpu_wrap() helper to iterate over
the possible cpus starting with the current CPU. As a result, some of
the special-casing in the loop also gets simplified.
No functional change intended.
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220907155746.1750329-1-punit.agrawal@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot is reporting ODEBUG bug in htab_map_alloc() [1], for
commit 86fe28f769 ("bpf: Optimize element count in non-preallocated
hash map.") added percpu_counter_init() to htab_map_alloc() but forgot to
add percpu_counter_destroy() to the error path.
Link: https://syzkaller.appspot.com/bug?extid=5d1da78b375c3b5e6c2b [1]
Reported-by: syzbot <syzbot+5d1da78b375c3b5e6c2b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 86fe28f769 ("bpf: Optimize element count in non-preallocated hash map.")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/e2e4cc0e-9d36-4ca1-9bfa-ce23e6f8310b@I-love.SAKURA.ne.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone
(Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=n7sX
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- revert a panic on swiotlb initialization failure (Yu Zhao)
- fix the lookup for partial syncs in dma-debug (Robin Murphy)
- fix a shift overflow in swiotlb (Chao Gao)
- fix a comment typo in swiotlb (Chao Gao)
- mark a function static now that all abusers are gone (Christoph
Hellwig)
* tag 'dma-mapping-6.0-2022-09-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: mark dma_supported static
swiotlb: fix a typo
swiotlb: avoid potential left shift overflow
dma-debug: improve search for partial syncs
Revert "swiotlb: panic if nslabs is too small"
Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxuERw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylPqwCgjU6xlN2y/80HH+66k+yyzlxocE8AoLPgnGrA
dJZIGWFXExzO26tvMT52
=zGHA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect capability
reporting to userspace, improper error handling for MW corners, touching
an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed
a timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type in
siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a crash on
error unwind.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYxtj4QAKCRCFwuHvBreF
YQNdAQDOAoXv3PCZikmyu4zmjzVdeUUXEig5RU3MgFdCimo99gEA8t+2/pHmnSTB
vn7cxuKMpJydAmLVFJPZxaOEuaBdegQ=
=/eYF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PSI accounts stalls for each cgroup separately and aggregates it
at each level of the hierarchy. This may cause non-negligible overhead
for some workloads when under deep level of the hierarchy.
commit 3958e2d0c3 ("cgroup: make per-cgroup pressure stall tracking configurable")
make PSI to skip per-cgroup stall accounting, only account system-wide
to avoid this each level overhead.
But for our use case, we also want leaf cgroup PSI stats accounted for
userspace adjustment on that cgroup, apart from only system-wide adjustment.
So this patch introduce a per-cgroup PSI accounting disable/re-enable
interface "cgroup.pressure", which is a read-write single value file that
allowed values are "0" and "1", the defaults is "1" so per-cgroup
PSI stats is enabled by default.
Implementation details:
It should be relatively straight-forward to disable and re-enable
state aggregation, time tracking, averaging on a per-cgroup level,
if we can live with losing history from while it was disabled.
I.e. the avgs will restart from 0, total= will have gaps.
But it's hard or complex to stop/restart groupc->tasks[] updates,
which is not implemented in this patch. So we always update
groupc->tasks[] and PSI_ONCPU bit in psi_group_change() even when
the cgroup PSI stats is disabled.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20220907090332.2078-1-zhouchengming@bytedance.com
We use iterate_groups() to iterate each level psi_group to update
PSI stats, which is a very hot path.
In current code, iterate_groups() have to use multiple branches and
cgroup_parent() to get parent psi_group for each level, which is not
very efficient.
This patch cache parent psi_group in struct psi_group, only need to get
psi_group of task itself first, then just use group->parent to iterate.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-10-zhouchengming@bytedance.com
cgroup_psi() can't return psi_group for root cgroup, so we have many
open code "psi = cgroup_ino(cgrp) == 1 ? &psi_system : cgrp->psi".
This patch move cgroup_psi() definition to <linux/psi.h>, in which
we can return psi_system for root cgroup, so can handle all cgroups.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-9-zhouchengming@bytedance.com
Now PSI already tracked workload pressure stall information for
CPU, memory and IO. Apart from these, IRQ/SOFTIRQ could have
obvious impact on some workload productivity, such as web service
workload.
When CONFIG_IRQ_TIME_ACCOUNTING, we can get IRQ/SOFTIRQ delta time
from update_rq_clock_task(), in which we can record that delta
to CPU curr task's cgroups as PSI_IRQ_FULL status.
Note we don't use PSI_IRQ_SOME since IRQ/SOFTIRQ always happen in
the current task on the CPU, make nothing productive could run
even if it were runnable, so we only use PSI_IRQ_FULL.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-8-zhouchengming@bytedance.com
We put all fields updated by the scheduler in the first cacheline of
struct psi_group_cpu for performance.
Since we want add another PSI_IRQ_FULL to track IRQ/SOFTIRQ pressure,
we need to reclaim space first. This patch remove NR_ONCPU task accounting
in struct psi_group_cpu, use one bit in state_mask to track instead.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20220825164111.29534-7-zhouchengming@bytedance.com
Way back when PSI_MEM_FULL was accounted from the timer tick, task
switching could simply iterate next and prev to the common ancestor to
update TSK_ONCPU and be done.
Then memstall ticks were replaced with checking curr->in_memstall
directly in psi_group_change(). That meant that now if the task switch
was between a memstall and a !memstall task, we had to iterate through
the common ancestors at least ONCE to fix up their state_masks.
We added the identical_state filter to make sure the common ancestor
elimination was skipped in that case. It seems that was always a
little too eager, because it caused us to walk the common ancestors
*twice* instead of the required once: the iteration for next could
have stopped at the common ancestor; prev could have updated TSK_ONCPU
up to the common ancestor, then finish to the root without changing
any flags, just to get the new curr->in_memstall into the state_masks.
This patch recognizes this and makes it so that we walk to the root
exactly once if state_mask needs updating, which is simply catching up
on a missed optimization that could have been done in commit 7fae6c8171
("psi: Use ONCPU state tracking machinery to detect reclaim") directly.
Apart from this, it's also necessary for the next patch "sched/psi: remove
NR_ONCPU task accounting". Suppose we walk the common ancestors twice:
(1) psi_group_change(.clear = 0, .set = TSK_ONCPU)
(2) psi_group_change(.clear = TSK_ONCPU, .set = 0)
We previously used tasks[NR_ONCPU] to record TSK_ONCPU, tasks[NR_ONCPU]++
in (1) then tasks[NR_ONCPU]-- in (2), so tasks[NR_ONCPU] still be correct.
The next patch change to use one bit in state mask to record TSK_ONCPU,
PSI_ONCPU bit will be set in (1), but then be cleared in (2), which cause
the psi_group_cpu has task running on CPU but without PSI_ONCPU bit set!
With this patch, we will never walk the common ancestors twice, so won't
have above problem.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-6-zhouchengming@bytedance.com
This patch move psi_task_change/psi_task_switch declarations out of
PSI public header, since they are only needed for implementing the
PSI stats tracking in sched/stats.h
psi_task_switch is obvious, psi_task_change can't be public helper
since it doesn't check psi_disabled static key. And there is no
any user now, so put it in sched/stats.h too.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-5-zhouchengming@bytedance.com
We won't use cgroup psi_group when !psi_cgroups_enabled, so don't
bother to alloc percpu memory and init for it.
Also don't need to migrate task PSI stats between cgroups in
cgroup_move_task().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-4-zhouchengming@bytedance.com
commit 3958e2d0c3 ("cgroup: make per-cgroup pressure stall tracking configurable")
make PSI can be configured to skip per-cgroup stall accounting. And
doesn't expose PSI files in cgroup hierarchy.
This patch do the same thing when psi_disabled.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-3-zhouchengming@bytedance.com
We don't want to wake periodic aggregation work back up if the
task change is the aggregation worker itself going to sleep, or
we'll ping-pong forever.
Previously, we would use psi_task_change() in psi_dequeue() when
task going to sleep, so this check was put in psi_task_change().
But commit 4117cebf1a ("psi: Optimize task switch inside shared cgroups")
defer task sleep handling to psi_task_switch(), won't go through
psi_task_change() anymore.
So this patch move this check to psi_task_switch().
Fixes: 4117cebf1a ("psi: Optimize task switch inside shared cgroups")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220825164111.29534-2-zhouchengming@bytedance.com
It is better to use SYSCTL_ZERO and SYSCTL_ONE_HUNDRED instead of &i_zero
and &i_one_hundred, and then we can remove these two local variable.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
sysctl_vals and sysctl_long_vals are declared even if sysctl is disabled.
Move its definition to sysctl.c to make sure their integrity in any case.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Remove max_extfrag_threshold and replace by SYSCTL_ONE_THOUSAND.
No functional change.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
This patch provides debug/modules/unloaded_tainted file to see a
record of unloaded tainted modules.
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
For a lot of use cases in future patches, we will want to modify the
state of registers part of some same 'group' (e.g. same ref_obj_id). It
won't just be limited to releasing reference state, but setting a type
flag dynamically based on certain actions, etc.
Hence, we need a way to easily pass a callback to the function that
iterates over all registers in current bpf_verifier_state in all frames
upto (and including) the curframe.
While in C++ we would be able to easily use a lambda to pass state and
the callback together, sadly we aren't using C++ in the kernel. The next
best thing to avoid defining a function for each case seems like
statement expressions in GNU C. The kernel already uses them heavily,
hence they can passed to the macro in the style of a lambda. The
statement expression will then be substituted in the for loop bodies.
Variables __state and __reg are set to current bpf_func_state and reg
for each invocation of the expression inside the passed in verifier
state.
Then, convert mark_ptr_or_null_regs, clear_all_pkt_pointers,
release_reference, find_good_pkt_pointers, find_equal_scalars to
use bpf_for_each_reg_in_vstate.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220904204145.3089-16-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While auditing 6b959ba22d ("perf/core: Fix reentry problem in
perf_output_read_group()") a few spots were found that wanted
assertions.
Notable for_each_sibling_event() relies on exclusion from
modification. This would normally be holding either ctx->lock or
ctx->mutex, however due to how things are constructed disabling IRQs
is a valid and sufficient substitute for ctx->lock.
Another possible site to add assertions would be the various
pmu::{add,del,read,..}() methods, but that's not trivially expressable
in C -- the best option is wrappers, but those are easy enough to
forget.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Besides the branch type filtering requests, 'event.attr.branch_sample_type'
also contains various flags indicating which additional information should
be captured, along with the base branch record. These flags help configure
the underlying hardware, and capture the branch records appropriately when
required e.g after PMU interrupt. But first, this moves an existing helper
perf_sample_save_hw_index() into the header before adding some more helpers
for other branch sample filter flags.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220906084414.396220-1-anshuman.khandual@arm.com
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
Now that wait_task_inactive()'s @match_state argument is a mask (like
ttwu()) it is possible to replace the special !match_state case with
an 'all-states' value such that any blocked state will match.
Suggested-by: Ingo Molnar (mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YxhkzfuFTvRnpUaH@hirez.programming.kicks-ass.net
Make wait_task_inactive()'s @match_state work like ttwu()'s @state.
That is, instead of an equal comparison, use it as a mask. This allows
matching multiple block conditions.
(removes the unlikely; it doesn't make sense how it's only part of the
condition)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220822114648.856734578@infradead.org
handle_initrd() marks itself as PF_FREEZER_SKIP in order to ensure
that the UMH, which is going to freeze the system, doesn't
indefinitely wait for it's caller.
Rework things by adding UMH_FREEZABLE to indicate the completion is
freezable.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.791019324@infradead.org
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
There is some ambiguity about task_running() in that it is unrelated
to TASK_RUNNING but instead tests ->on_cpu. As such, rename the thing
task_on_cpu().
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yxhkhn55uHZx+NGl@hirez.programming.kicks-ass.net
The sched-domain of this cpu is only used for some heuristics when
SIS_PROP is enabled, and it should be irrelevant whether the local
sd_llc is valid or not, since all we care about is target sd_llc
if !SIS_PROP.
Access the local domain only when there is a need.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20220907112000.1854-6-wuyun.abel@bytedance.com
It's uncertain whether idle cores exist or not if shared sched-
domains are not ready, so returning "no idle cores" usually
makes sense.
While __update_idle_core() is an exception, it checks status
of this core and set hint to shared sched-domain if necessary.
So the whole logic of this function depends on the existence
of shared sched-domain, and can certainly bail out early if
it is not available.
It's somehow a little tricky, and as Josh suggested that it
should be transient while the domain isn't ready. So remove
the self-defined default value to make things more clearer.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-5-wuyun.abel@bytedance.com
The function select_idle_core() only gets called when has_idle_cores
is true which can be possible only when sched_smt_present is enabled.
This change also aligns select_idle_core() with select_idle_smt() in
the way that the caller do the check if necessary.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-4-wuyun.abel@bytedance.com
The prev cpu is checked at the beginning of SIS, and it's unlikely
to be idle before the second check in select_idle_smt(). So we'd
better focus on its SMT siblings.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-3-wuyun.abel@bytedance.com
If two cpus share LLC cache, then the two cores they belong to
are also in the same LLC domain.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20220907112000.1854-2-wuyun.abel@bytedance.com
Enable support for kptrs in percpu BPF arraymap by wiring up the freeing
of these kptrs from percpu map elements.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220904204145.3089-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sparse reported a warning at bpf_map_free_kptrs()
"warning: Using plain integer as NULL pointer"
During the process of fixing this warning, it was discovered that the current
code erroneously writes to the pointer variable instead of deferencing and
writing to the actual kptr. Hence, Sparse tool accidentally helped to uncover
this problem. Fix this by doing WRITE_ONCE(*p, 0) instead of WRITE_ONCE(p, 0).
Note that the effect of this bug is that unreferenced kptrs will not be cleared
during check_and_free_fields. It is not a problem if the clearing is not done
during map_free stage, as there is nothing to free for them.
Fixes: 14a324f6a6 ("bpf: Wire up freeing of referenced kptr")
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/Yxi3pJaK6UDjVJSy@playground
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For drivers (outside of network), the incoming data is not statically
defined in a struct. Most of the time the data buffer is kzalloc-ed
and thus we can not rely on eBPF and BTF to explore the data.
This commit allows to return an arbitrary memory, previously allocated by
the driver.
An interesting extra point is that the kfunc can mark the exported
memory region as read only or read/write.
So, when a kfunc is not returning a pointer to a struct but to a plain
type, we can consider it is a valid allocated memory assuming that:
- one of the arguments is either called rdonly_buf_size or
rdwr_buf_size
- and this argument is a const from the caller point of view
We can then use this parameter as the size of the allocated memory.
The memory is either read-only or read-write based on the name
of the size parameter.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-7-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
net/bpf/test_run.c is already presenting 20 kfuncs.
net/netfilter/nf_conntrack_bpf.c is also presenting an extra 10 kfuncs.
Given that all the kfuncs are regrouped into one unique set, having
only 2 space left prevent us to add more selftests.
Bump it to 256.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-6-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a function was trying to access data from context in a syscall eBPF
program, the verifier was rejecting the call unless it was accessing the
first element.
This is because the syscall context is not known at compile time, and
so we need to check this when actually accessing it.
Check for the valid memory access if there is no convert_ctx callback,
and allow such situation to happen.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-4-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_check_subprog_arg_match() was used twice in verifier.c:
- when checking for the type mismatches between a (sub)prog declaration
and BTF
- when checking the call of a subprog to see if the provided arguments
are correct and valid
This is problematic when we check if the first argument of a program
(pointer to ctx) is correctly accessed:
To be able to ensure we access a valid memory in the ctx, the verifier
assumes the pointer to context is not null.
This has the side effect of marking the program accessing the entire
context, even if the context is never dereferenced.
For example, by checking the context access with the current code, the
following eBPF program would fail with -EINVAL if the ctx is set to null
from the userspace:
```
SEC("syscall")
int prog(struct my_ctx *args) {
return 0;
}
```
In that particular case, we do not want to actually check that the memory
is correct while checking for the BTF validity, but we just want to
ensure that the (sub)prog definition matches the BTF we have.
So split btf_check_subprog_arg_match() in two so we can actually check
for the memory used when in a call, and ignore that part when not.
Note that a further patch is in preparation to disentangled
btf_check_func_arg_match() from these two purposes, and so right now we
just add a new hack around that by adding a boolean to this function.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220906151303.2780789-3-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
selinux_audit_rule_update() has been renamed to audit_update_lsm_rules()
since commit d7a96f3a1a ("Audit: internally use the new LSM audit
hooks"), so remove it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add __dyndbg_classes section, using __dyndbg as a model. Use it:
vmlinux.lds.h:
KEEP the new section, which also silences orphan section warning on
loadable modules. Add (__start_/__stop_)__dyndbg_classes linker
symbols for the c externs (below).
kernel/module/main.c:
- fill new fields in find_module_sections(), using section_objs()
- extend callchain prototypes
to pass classes, length
load_module(): pass new info to dynamic_debug_setup()
dynamic_debug_setup(): new params, pass through to ddebug_add_module()
dynamic_debug.c:
- add externs to the linker symbols.
ddebug_add_module():
- It currently builds a debug_table, and *will* find and attach classes.
dynamic_debug_init():
- add class fields to the _ddebug_info cursor var: di.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new struct composes the linker provided (vector,len) section,
and provides a place to add other __dyndbg[] state-data later:
descs - the vector of descriptors in __dyndbg section.
num_descs - length of the data/section.
Use it, in several different ways, as follows:
In lib/dynamic_debug.c:
ddebug_add_module(): Alter params-list, replacing 2 args (array,index)
with a struct _ddebug_info * containing them both, with room for
expansion. This helps future-proof the function prototype against the
looming addition of class-map info into the dyndbg-state, by providing
a place to add more member fields later.
NB: later add static struct _ddebug_info builtins_state declaration,
not needed yet.
ddebug_add_module() is called in 2 contexts:
In dynamic_debug_init(), declare, init a struct _ddebug_info di
auto-var to use as a cursor. Then iterate over the prdbg blocks of
the builtin modules, and update the di cursor before calling
_add_module for each.
Its called from kernel/module/main.c:load_info() for each loaded
module:
In internal.h, alter struct load_info, replacing the dyndbg array,len
fields with an embedded _ddebug_info containing them both; and
populate its members in find_module_sections().
The 2 calling contexts differ in that _init deals with contiguous
subranges of __dyndbgs[] section, packed together, while loadable
modules are added one at a time.
So rename ddebug_add_module() into outer/__inner fns, call __inner
from _init, and provide the offset into the builtin __dyndbgs[] where
the module's prdbgs reside. The cursor provides start, len of the
subrange for each. The offset will be used later to pack the results
of builtin __dyndbg_sites[] de-duplication, and is 0 and unneeded for
loadable modules,
Note:
kernel/module/main.c includes <dynamic_debug.h> for struct
_ddeubg_info. This might be prone to include loops, since its also
included by printk.h. Nothing has broken in robot-land on this.
cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-12-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.
Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.
Fixes: 26a7e09478 ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When bucket_find_contains() tries to find the original entry for a
partial sync, it manages to constrain its search in a way that is both
too restrictive and not restrictive enough. A driver which only uses
single mappings rather than scatterlists might not set max_seg_size, but
could still technically perform a partial sync at an offset of more than
64KB into a sufficiently large mapping, so we could stop searching too
early before reaching a legitimate entry. Conversely, if no valid entry
is present and max_range is large enough, we can pointlessly search
buckets that we've already searched, or that represent an impossible
wrapping around the bottom of the address space. At worst, the
(legitimate) case of max_seg_size == UINT_MAX can make the loop
infinite.
Replace the fragile and frankly hard-to-follow "range" logic with a
simple counted loop for the number of possible hash buckets below the
given address.
Reported-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow struct argument in trampoline based programs where
the struct size should be <= 16 bytes. In such cases, the argument
will be put into up to 2 registers for bpf, x86_64 and arm64
architectures.
To support arch-specific trampoline manipulation,
add arg_flags for additional struct information about arguments
in btf_func_model. Such information will be used in arch specific
function arch_prepare_bpf_trampoline() to prepare argument access
properly in trampoline.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220831152646.2078089-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__ksize() was made private. Use ksize() instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since the check_user_trigger() is called outside of RCU
read lock, this list_for_each_entry_rcu() caused a suspicious
RCU usage warning.
# echo hist:keys=pid > events/sched/sched_stat_runtime/trigger
# cat events/sched/sched_stat_runtime/trigger
[ 43.167032]
[ 43.167418] =============================
[ 43.167992] WARNING: suspicious RCU usage
[ 43.168567] 5.19.0-rc5-00029-g19ebe4651abf #59 Not tainted
[ 43.169283] -----------------------------
[ 43.169863] kernel/trace/trace_events_trigger.c:145 RCU-list traversed in non-reader section!!
...
However, this file->triggers list is safe when it is accessed
under event_mutex is held.
To fix this warning, adds a lockdep_is_held check to the
list_for_each_entry_rcu().
Link: https://lkml.kernel.org/r/166226474977.223837.1992182913048377113.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed
in CALLER_ADDR0.
The function trace_hardirqs_on_caller should have been intended to use
caller_addr to represent the address that caller wants to be traced.
For example, lockdep log in riscv showing the last {enabled,disabled} at
__trace_hardirqs_{on,off} all the time(if called by):
[ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14
[ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14
After use trace_hardirqs_xx_caller, we can get more effective information:
[ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66
[ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10
Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 2852ca7fba ("panic: Taint kernel if tests are run")
introduced a new taint type, TAINT_TEST, to signal that an
in-kernel test module has been loaded.
TAINT_TEST taint type defaults into a 'bad_taint' list for
kernel tracing and blocks the creation of trace events. This
causes a problem for CXL testing where loading the cxl_test
module makes all CXL modules out-of-tree, blocking any trace
events.
Trace events are in development for CXL at the moment and this
issue was found in test with v6.0-rc1.
Link: https://lkml.kernel.org/r/20220829171048.263065-1-alison.schofield@intel.com
Fixes: 2852ca7fba ("panic: Taint kernel if tests are run")
Reported-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771d ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CFTYPE_PRESSURE is used to flag PSI related files so that they are not
created if PSI is disabled during boot. It's a bit weird to use a generic
flag to mark a specific file type. Let's instead move the PSI files into its
own cftypes array and add/rm them conditionally. This is a bit more code but
cleaner.
No userland visible changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Let's track whether a cftype is currently added or not using a new flag
__CFTYPE_ADDED so that duplicate operations can be failed safely and
consistently allow using empty cftypes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Use the new sample_flags to indicate whether the txn field is filled by
the PMU driver.
Remove the txn field from the perf_sample_data_init() to minimize the
number of cache lines touched.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901130959.1285717-7-kan.liang@linux.intel.com
Use the new sample_flags to indicate whether the data_src field is
filled by the PMU driver.
Remove the data_src field from the perf_sample_data_init() to minimize
the number of cache lines touched.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901130959.1285717-6-kan.liang@linux.intel.com
Use the new sample_flags to indicate whether the weight field is filled
by the PMU driver.
Remove the weight field from the perf_sample_data_init() to minimize the
number of cache lines touched.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901130959.1285717-5-kan.liang@linux.intel.com
Use the new sample_flags to indicate whether the branch stack is filled
by the PMU driver.
Remove the br_stack from the perf_sample_data_init() to minimize the number
of cache lines touched.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901130959.1285717-4-kan.liang@linux.intel.com
On some platforms, some data e.g., timestamps, can be retrieved from
the PMU driver. Usually, the data from the PMU driver is more accurate.
The current perf kernel should output the PMU-filled sample data if
it's available.
To check the availability of the PMU-filled sample data, the current
perf kernel initializes the related fields in the
perf_sample_data_init(). When outputting a sample, the perf checks
whether the field is updated by the PMU driver. If yes, the updated
value will be output. If not, the perf uses an SW way to calculate the
value or just outputs the initialized value if an SW way is unavailable
either.
With more and more data being provided by the PMU driver, more fields
has to be initialized in the perf_sample_data_init(). That will
increase the number of cache lines touched in perf_sample_data_init()
and be harmful to the performance.
Add new "sample_flags" to indicate the PMU-filled sample data. The PMU
driver should set the corresponding PERF_SAMPLE_ flag when the field is
updated. The initialization of the corresponding field is not required
anymore. The following patches will make use of it and remove the
corresponding fields from the perf_sample_data_init(), which will
further minimize the number of cache lines touched.
Only clear the sample flags that have already been done by the PMU
driver in the perf_prepare_sample() for the PERF_RECORD_SAMPLE. For the
other PERF_RECORD_ event type, the sample data is not available.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220901130959.1285717-2-kan.liang@linux.intel.com
perf_output_read_group may respond to IPI request of other cores and invoke
__perf_install_in_context function. As a result, hwc configuration is modified.
causing inconsistency and unexpected consequences.
Interrupts are not disabled when perf_output_read_group reads PMU counter.
In this case, IPI request may be received from other cores.
As a result, PMU configuration is modified and an error occurs when
reading PMU counter:
CPU0 CPU1
__se_sys_perf_event_open
perf_install_in_context
perf_output_read_group smp_call_function_single
for_each_sibling_event(sub, leader) { generic_exec_single
if ((sub != event) && remote_function
(sub->state == PERF_EVENT_STATE_ACTIVE)) |
<enter IPI handler: __perf_install_in_context> <----RAISE IPI-----+
__perf_install_in_context
ctx_resched
event_sched_out
armpmu_del
...
hwc->idx = -1; // event->hwc.idx is set to -1
...
<exit IPI>
sub->pmu->read(sub);
armpmu_read
armv8pmu_read_counter
armv8pmu_read_hw_counter
int idx = event->hw.idx; // idx = -1
u64 val = armv8pmu_read_evcntr(idx);
u32 counter = ARMV8_IDX_TO_COUNTER(idx); // invalid counter = 30
read_pmevcntrn(counter) // undefined instruction
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220902082918.179248-1-yangjihong1@huawei.com
User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
and wait for rcu barrier-s in the worker to let the rest of
hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com
For bpf_mem_cache based hash maps the following stress test:
for (i = 1; i <= 512; i <<= 1)
for (j = 1; j <= 1 << 18; j <<= 1)
fd = bpf_map_create(BPF_MAP_TYPE_HASH, NULL, i, j, 2, 0);
creates many kmem_cache-s that are not mergeable in debug kernels
and consume unnecessary amount of memory.
Turned out bpf_mem_cache's free_list logic does batching well,
so usage of kmem_cache for fixes size allocations doesn't bring
any performance benefits vs normal kmalloc.
Hence get rid of kmem_cache in bpf_mem_cache.
That saves memory, speeds up map create/destroy operations,
while maintains hash map update/delete performance.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-16-alexei.starovoitov@gmail.com
Since hash map is now converted to bpf_mem_alloc and it's waiting for rcu and
rcu_tasks_trace GPs before freeing elements into global memory slabs it's safe
to use dynamically allocated hash maps in sleepable bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-15-alexei.starovoitov@gmail.com
Use call_rcu_tasks_trace() to wait for sleepable progs to finish.
Then use call_rcu() to wait for normal progs to finish
and finally do free_one() on each element when freeing objects
into global memory pool.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-14-alexei.starovoitov@gmail.com
The hash map is now fully converted to bpf_mem_alloc. Its implementation is not
allocating synchronously and not calling call_rcu() directly. It's now safe to
use non-preallocated hash maps in all types of tracing programs including
BPF_PROG_TYPE_PERF_EVENT that runs out of NMI context.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-13-alexei.starovoitov@gmail.com
Convert dynamic allocations in percpu hash map from alloc_percpu() to
bpf_mem_cache_alloc() from per-cpu bpf_mem_alloc. Since bpf_mem_alloc frees
objects after RCU gp the call_rcu() is removed. pcpu_init_value() now needs to
zero-fill per-cpu allocations, since dynamically allocated map elements are now
similar to full prealloc, since alloc_percpu() is not called inline and the
elements are reused in the freelist.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-12-alexei.starovoitov@gmail.com
Extend bpf_mem_alloc to cache free list of fixed size per-cpu allocations.
Once such cache is created bpf_mem_cache_alloc() will return per-cpu objects.
bpf_mem_cache_free() will free them back into global per-cpu pool after
observing RCU grace period.
per-cpu flavor of bpf_mem_alloc is going to be used by per-cpu hash maps.
The free list cache consists of tuples { llist_node, per-cpu pointer }
Unlike alloc_percpu() that returns per-cpu pointer
the bpf_mem_cache_alloc() returns a pointer to per-cpu pointer and
bpf_mem_cache_free() expects to receive it back.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-11-alexei.starovoitov@gmail.com
SLAB_TYPESAFE_BY_RCU makes kmem_caches non mergeable and slows down
kmem_cache_destroy. All bpf_mem_cache are safe to share across different maps
and programs. Convert SLAB_TYPESAFE_BY_RCU to batched call_rcu. This change
solves the memory consumption issue, avoids kmem_cache_destroy latency and
keeps bpf hash map performance the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-10-alexei.starovoitov@gmail.com
The same low/high watermarks for every bucket in bpf_mem_cache consume
significant amount of memory. Preallocating 64 elements of 4096 bytes each in
the free list is not efficient. Make low/high watermarks and batching value
dependent on element size. This change brings significant memory savings.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-9-alexei.starovoitov@gmail.com
Doing call_rcu() million times a second becomes a bottle neck.
Convert non-preallocated hash map from call_rcu to SLAB_TYPESAFE_BY_RCU.
The rcu critical section is no longer observed for one htab element
which makes non-preallocated hash map behave just like preallocated hash map.
The map elements are released back to kernel memory after observing
rcu critical section.
This improves 'map_perf_test 4' performance from 100k events per second
to 250k events per second.
bpf_mem_alloc + percpu_counter + typesafe_by_rcu provide 10x performance
boost to non-preallocated hash map and make it within few % of preallocated map
while consuming fraction of memory.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-8-alexei.starovoitov@gmail.com
The atomic_inc/dec might cause extreme cache line bouncing when multiple cpus
access the same bpf map. Based on specified max_entries for the hash map
calculate when percpu_counter becomes faster than atomic_t and use it for such
maps. For example samples/bpf/map_perf_test is using hash map with max_entries
1000. On a system with 16 cpus the 'map_perf_test 4' shows 14k events per
second using atomic_t. On a system with 15 cpus it shows 100k events per second
using percpu. map_perf_test is an extreme case where all cpus colliding on
atomic_t which causes extreme cache bouncing. Note that the slow path of
percpu_counter is 5k events per secound vs 14k for atomic, so the heuristic is
necessary. See comment in the code why the heuristic is based on
num_online_cpus().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-7-alexei.starovoitov@gmail.com
Since bpf hash map was converted to use bpf_mem_alloc it is safe to use
from tracing programs and in RT kernels.
But per-cpu hash map is still using dynamic allocation for per-cpu map
values, hence keep the warning for this map type.
In the future alloc_percpu_gfp can be front-end-ed with bpf_mem_cache
and this restriction will be completely lifted.
perf_event (NMI) bpf programs have to use preallocated hash maps,
because free_htab_elem() is using call_rcu which might crash if re-entered.
Sleepable bpf programs have to use preallocated hash maps, because
life time of the map elements is not protected by rcu_read_lock/unlock.
This restriction can be lifted in the future as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-6-alexei.starovoitov@gmail.com
Tracing BPF programs can attach to kprobe and fentry. Hence they
run in unknown context where calling plain kmalloc() might not be safe.
Front-end kmalloc() with minimal per-cpu cache of free elements.
Refill this cache asynchronously from irq_work.
BPF programs always run with migration disabled.
It's safe to allocate from cache of the current cpu with irqs disabled.
Free-ing is always done into bucket of the current cpu as well.
irq_work trims extra free elements from buckets with kfree
and refills them with kmalloc, so global kmalloc logic takes care
of freeing objects allocated by one cpu and freed on another.
struct bpf_mem_alloc supports two modes:
- When size != 0 create kmem_cache and bpf_mem_cache for each cpu.
This is typical bpf hash map use case when all elements have equal size.
- When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
kmalloc/kfree. Max allocation size is 4096 in this case.
This is bpf_dynptr and bpf_kptr use case.
bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree.
bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free.
The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
Fix a nested dead lock as part of ODP flow by using mmput_async().
From the below call trace [1] can see that calling mmput() once we have
the umem_odp->umem_mutex locked as required by
ib_umem_odp_map_dma_and_lock() might trigger in the same task the
exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which
may dead lock when trying to lock the same mutex.
Moving to use mmput_async() will solve the problem as the above
exit_mmap() flow will be called in other task and will be executed once
the lock will be available.
[1]
[64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid:
2 flags:0x00004000
[64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
[64843.077719] Call Trace:
[64843.077722] <TASK>
[64843.077724] __schedule+0x23d/0x590
[64843.077729] schedule+0x4e/0xb0
[64843.077735] schedule_preempt_disabled+0xe/0x10
[64843.077740] __mutex_lock.constprop.0+0x263/0x490
[64843.077747] __mutex_lock_slowpath+0x13/0x20
[64843.077752] mutex_lock+0x34/0x40
[64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib]
[64843.077808] __mmu_notifier_release+0x1a4/0x200
[64843.077816] exit_mmap+0x1bc/0x200
[64843.077822] ? walk_page_range+0x9c/0x120
[64843.077828] ? __cond_resched+0x1a/0x50
[64843.077833] ? mutex_lock+0x13/0x40
[64843.077839] ? uprobe_clear_state+0xac/0x120
[64843.077860] mmput+0x5f/0x140
[64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core]
[64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib]
[64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib]
[64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560
[mlx5_ib]
[64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib]
[64843.078051] process_one_work+0x22b/0x3d0
[64843.078059] worker_thread+0x53/0x410
[64843.078065] ? process_one_work+0x3d0/0x3d0
[64843.078073] kthread+0x12a/0x150
[64843.078079] ? set_kthread_struct+0x50/0x50
[64843.078085] ret_from_fork+0x22/0x30
[64843.078093] </TASK>
Fixes: 36f30e486d ("IB/core: Improve ODP to use hmm_range_fault()")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup())
leaks a dentry and with a hotplug stress test, the machine eventually
runs out of memory.
Fix this up by using the newly created debugfs_lookup_and_remove() call
instead which properly handles the dentry reference counting logic.
Cc: Major Chen <major.chen@samsung.com>
Cc: stable <stable@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220902123107.109274-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, changes in "cpust.cpus" of a partition root is not allowed if
it violates the sibling cpu exclusivity rule when the check is done
in the validate_change() function. That is inconsistent with the
other cpuset changes that are always allowed but may make a partition
invalid.
Update the cpuset code to allow cpumask change even if it violates the
sibling cpu exclusivity rule, but invalidate the partition instead
just like the other changes. However, other sibling partitions with
conflicting cpumask will also be invalidated in order to not violating
the exclusivity rule. This behavior is specific to this partition
rule violation.
Note that a previous commit has made sibling cpu exclusivity rule check
the last check of validate_change(). So if -EINVAL is returned, we can
be sure that sibling cpu exclusivity rule violation is the only rule
that is broken.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch moves down the exclusive cpu and memory check in
validate_change(). There is no functional change.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are a number of different reasons which can cause a partition to
become invalid. A user seeing an invalid partition may not know exactly
why. To help user to get a better understanding of the underlying reason,
The cpuset.cpus.partition control file, when read, will now report the
reason why a partition become invalid. When a partition does become
invalid, reading the control file will show "root invalid (<reason>)"
where <reason> is a string that describes why the partition is invalid.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cpuset v1 uses the sched_load_balance control file to determine if load
balancing should be enabled. Cpuset v2 gets rid of sched_load_balance
as its use may require disabling load balancing at cgroup root.
For workloads that require very low latency like DPDK, the latency
jitters caused by periodic load balancing may exceed the desired
latency limit.
When cpuset v2 is in use, the only way to avoid this latency cost is to
use the "isolcpus=" kernel boot option to isolate a set of CPUs. After
the kernel boot, however, there is no way to add or remove CPUs from
this isolated set. For workloads that are more dynamic in nature, that
means users have to provision enough CPUs for the worst case situation
resulting in excess idle CPUs.
To address this issue for cpuset v2, a new cpuset.cpus.partition type
"isolated" is added which allows the creation of a cpuset partition
without load balancing. This will allow system administrators to
dynamically adjust the size of isolated partition to the current need
of the workload without rebooting the system.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, enabling a partition root is only allowed if all the
constraints of a valid partition are satisfied. Even changes to
"cpuset.cpus" may not be allowed in some cases. Moreover, there are
limits to changes made to a parent cpuset if it is a valid partition
root. This is contrary to the general cgroup v2 philosophy.
This patch relaxes the constraints of changing the state of "cpuset.cpus"
and "cpuset.cpus.partition". Now all valid changes ("member" or "root")
to "cpuset.cpus.partition" are allowed even if there are child cpusets
underneath it.
Trying to make a cpuset a partition root, however, will cause its state
to become invalid if the following constraints of a valid partition
root are not satisfied.
1) The "cpuset.cpus" is non-empty and exclusive.
2) The parent cpuset is a valid partition root.
3) The "cpuset.cpus" overlaps parent's "cpuset.cpus".
Similarly, almost all changes to "cpuset.cpus" are allowed with the
exception that if the underlying CS_CPU_EXCLUSIVE flag is set, the
exclusivity rule will still apply.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, a partition root cannot have empty "cpuset.cpus.effective".
As a result, a parent partition root cannot distribute out all its
CPUs to child partitions with no CPUs left. However in most cases,
there shouldn't be any tasks associated with intermediate nodes of the
default hierarchy. So the current rule is too restrictive and can waste
valuable CPU resource.
To address this issue, we are now allowing a partition to have empty
"cpuset.cpus.effective" as long as it has no task. Since cpuset is
threaded, no-internal-process rule does not apply. So it is possible
to have tasks in a partition root with child sub-partitions even though
that should be uncommon.
A parent partition with no task can now have all its CPUs distributed out
to its child partitions. The top cpuset always have some house-keeping
tasks running and so its list of effective cpu can't be empty.
Once a partition with empty "cpuset.cpus.effective" is formed, no
new task can be moved into it until "cpuset.cpus.effective" becomes
non-empty.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The partition root state (PRS) macro names do not currently match the
external names. Change them to match the external names and add helper
functions to read or change the state.
Shorten the cpuset argument of update_parent_subparts_cpumask() to cs
to match other cpuset functions.
Remove the new_prs argument from notify_partition_change() as the
cs->partition_root_state has already been set to new_prs before it
is called.
There is no functional change.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Previously, update_tasks_cpumask() is not supposed to be called with
top cpuset. With cpuset partition that takes CPUs away from the top
cpuset, adjusting the cpus_mask of the tasks in the top cpuset is
necessary. Percpu kthreads, however, are ignored.
Fixes: ee8dde0cd2 ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
pids.peak tracks the high watermark of usage for number of pids. This
helps give a better baseline on which to set pids.max. Polling
pids.current isn't really feasible, since it would potentially miss
short-lived spikes.
This interface is analogous to memory.peak.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There's a seemingly harmless data-race around cgrp_dfl_visible detected by
kernel concurrency sanitizer. Let's remove it by throwing WRITE/READ_ONCE at
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: Gabriel Ryan <gabe@cs.columbia.edu>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/netdev/20220819072256.fn7ctciefy4fc4cu@wittgenstein/
When CONFIG_SECURITY_NETWORK is disabled, there will be build warnings
from resolve_btfids:
WARN: resolve_btfids: unresolved symbol bpf_lsm_socket_socketpair
......
WARN: resolve_btfids: unresolved symbol bpf_lsm_inet_conn_established
Fixing it by wrapping these BTF ID definitions by CONFIG_SECURITY_NETWORK.
Fixes: 69fd337a97 ("bpf: per-cgroup lsm flavor")
Fixes: 9113d7e48e ("bpf: expose bpf_{g,s}etsockopt to lsm cgroup")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220901065126.3856297-1-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The assignment of the else and else if branches is the same, so the else
if here is redundant, so we remove it and add a comment to make the code
here readable.
./kernel/bpf/cgroup_iter.c:81:6-8: WARNING: possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2016
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220831021618.86770-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Both __this_cpu_inc_return() and __this_cpu_dec() are not preemption
safe and now migrate_disable() doesn't disable preemption, so the update
of prog-active is not atomic and in theory under fully preemptible kernel
recurisve prevention may do not work.
Fixing by using the preemption-safe and IRQ-safe variants.
Fixes: ca06f55b90 ("bpf: Add per-program recursion prevention mechanism")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Now migrate_disable() does not disable preemption and under some
architectures (e.g. arm64) __this_cpu_{inc|dec|inc_return} are neither
preemption-safe nor IRQ-safe, so for fully preemptible kernel concurrent
lookups or updates on the same task local storage and on the same CPU
may make bpf_task_storage_busy be imbalanced, and
bpf_task_storage_trylock() on the specific cpu will always fail.
Fixing it by using this_cpu_{inc|dec|inc_return} when manipulating
bpf_task_storage_busy.
Fixes: bc235cdb42 ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20220901061938.3789460-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The rcutorture_oom_notify() function unconditionally invokes
rcu_barrier(), which is OK when the rcutorture.torture_type value is
"rcu", but unhelpful otherwise. The purpose of these barrier calls is to
wait for all outstanding callback-flooding callbacks to be invoked before
cleaning up their data. Using the wrong barrier function therefore
risks arbitrary memory corruption. Thus, this commit changes these
rcu_barrier() calls into cur_ops->cb_barrier() to make things work when
torturing non-vanilla flavors of RCU.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add cgroup_file_show() which allows toggling visibility of a cgroup file
using the new kernfs_show(). This will be used to hide psi interface files
on cgroups where it's disabled.
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-10-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
console_unblank() does this too (called in both places right after),
and with a lot more confidence inspiring approach to locking.
Reconstructing this story is very strange:
In b61312d353 ("oops handling: ensure that any oops is flushed to
the mtdoops console") it is claimed that a printk(" "); flushed out
the console buffer, which was removed in e3e8a75d2a ("[PATCH]
Extract and use wake_up_klogd()"). In todays kernels this is done way
earlier in console_flush_on_panic with some really nasty tricks. I
didn't bother to fully reconstruct this all, least because the call to
bust_spinlock(0); gets moved every few years, depending upon how the
wind blows (or well, who screamed loudest about the various issue each
call site caused).
Before that commit the only calls to console_unblank() where in s390
arch code.
The other side here is the console->unblank callback, which was
introduced in 2.1.31 for the vt driver. Which predates the
console_unblank() function by a lot, which was added (without users)
in 2.4.14.3. So pretty much impossible to guess at any motivation
here. Also afaict the vt driver is the only (and always was the only)
console driver implementing the unblank callback, so no idea why a
call to console_unblank() was added for the mtdooops driver - the
action actually flushing out the console buffers is done from
console_unlock() only.
Note that as prep for the s390 users the locking was adjusted in
2.5.22 (I couldn't figure out how to properly reference the BK commit
from the historical git trees) from a normal semaphore to a trylock.
Note that a copy of the direct unblank_screen() call was added to
panic() in c7c3f05e34 ("panic: avoid deadlocks in re-entrant console
drivers"), which partially inlined the bust_spinlocks(0); call.
Long story short, I have no idea why the direct call to unblank_screen
survived for so long (the infrastructure to do it properly existed for
years), nor why it wasn't removed when the console_unblank() call was
finally added. But it makes a ton more sense to finally do that than
not - it's just better encapsulation to go through the console
functions instead of doing a direct call, so let's dare. Plus it
really does not make much sense to call the only unblank
implementation there is twice, once without, and once with appropriate
locking.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Cc: Yangxi Xiang <xyangxi5@gmail.com>
Cc: nick black <dankamongmen@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Marco Elver <elver@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: David Gow <davidgow@google.com>
Cc: tangmeng <tangmeng@uniontech.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20220830145004.430545-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error message is not printed immediately because it does not end with
a newline character.
Before:
root@localhost:~# insmod vmlinux.ko
insmod: ERROR: could not insert module vmlinux.ko: Invalid parameters
After:
root@localhost:~# insmod vmlinux.ko
[ 43.982558] livepatch: vmlinux.ko: invalid module name
insmod: ERROR: could not insert module vmlinux.ko: Invalid parameters
Fixes: dcf550e52f ("livepatch: Disallow vmlinux.ko")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220830112855.749-1-thunder.leizhen@huawei.com
The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.
However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.
However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.
This results in the KLP code occasionally hitting this warning in
klp_complete_transition:
for_each_process_thread(g, task) {
WARN_ON_ONCE(test_tsk_thread_flag(task, TIF_PATCH_PENDING));
task->patch_state = KLP_UNDEFINED;
}
Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.
The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.
This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Fixes: d83a7cb375 ("livepatch: change to a per-task consistency model")
Cc: stable@kernel.org
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com
As members in sched_dl_entity are independent with dl_bw, move
__dl_clear_params out of dl_bw lock.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220827020911.30641-1-shangxiaojing@huawei.com
Wrap repeated code in helper function replenish_dl_new_period, which set
the deadline and runtime of input dl_se based on pi_of(dl_se). Note that
setup_new_dl_entity originally set the deadline and runtime base on
dl_se, which should equals to pi_of(dl_se) for non-boosted task.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220826100037.12146-1-shangxiaojing@huawei.com
Wrap repeated code in helper function dl_task_is_earliest_deadline, which
return true if there is no deadline task on the rq at all, or task's
deadline earlier than the whole rq.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20220826083453.698-1-shangxiaojing@huawei.com
In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns
-EBUSY, it will go to next bucket. Going to next bucket may not only
skip the elements in current bucket silently, but also incur
out-of-bound memory access or expose kernel memory to userspace if
current bucket_cnt is greater than bucket_size or zero.
Fixing it by stopping batch operation and returning -EBUSY when
htab_lock_bucket() fails, and the application can retry or skip the busy
batch as needed.
Fixes: 20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Per-cpu htab->map_locked is used to prohibit the concurrent accesses
from both NMI and non-NMI contexts. But since commit 74d862b682
("sched: Make migrate_disable/enable() independent of RT"),
migrate_disable() is also preemptible under CONFIG_PREEMPT case, so now
map_locked also disallows concurrent updates from normal contexts
(e.g. userspace processes) unexpectedly as shown below:
process A process B
htab_map_update_elem()
htab_lock_bucket()
migrate_disable()
/* return 1 */
__this_cpu_inc_return()
/* preempted by B */
htab_map_update_elem()
/* the same bucket as A */
htab_lock_bucket()
migrate_disable()
/* return 2, so lock fails */
__this_cpu_inc_return()
return -EBUSY
A fix that seems feasible is using in_nmi() in htab_lock_bucket() and
only checking the value of map_locked for nmi context. But it will
re-introduce dead-lock on bucket lock if htab_lock_bucket() is re-entered
through non-tracing program (e.g. fentry program).
One cannot use preempt_disable() to fix this issue as htab_use_raw_lock
being false causes the bucket lock to be a spin lock which can sleep and
does not work with preempt_disable().
Therefore, use migrate_disable() when using the spinlock instead of
preempt_disable() and defer fixing concurrent updates to when the kernel
has its own BPF memory allocator.
Fixes: 74d862b682 ("sched: Make migrate_disable/enable() independent of RT")
Reviewed-by: Hao Luo <haoluo@google.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220831042629.130006-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Userspace execution is a valid quiescent state for RCU Tasks Trace,
but the scheduling-clock interrupt does not currently report such
quiescent states.
Of course, the scheduling-clock interrupt is not strictly speaking
userspace execution. However, the only way that this code is not
in a quiescent state is if something invoked rcu_read_lock_trace(),
and that would be reflected in the ->trc_reader_nesting field in
the task_struct structure. Furthermore, this field is checked by
rcu_tasks_trace_qs(), which is invoked by rcu_tasks_qs() which is in
turn invoked by rcu_note_voluntary_context_switch() in kernels building
at least one of the RCU Tasks flavors. It is therefore safe to invoke
rcu_tasks_trace_qs() from the rcu_sched_clock_irq().
But rcu_tasks_qs() also invokes rcu_tasks_classic_qs() for RCU
Tasks, which lacks the read-side markers provided by RCU Tasks Trace.
This raises the possibility that an RCU Tasks grace period could start
after the interrupt from userspace execution, but before the call to
rcu_sched_clock_irq(). However, it turns out that this is safe because
the RCU Tasks grace period waits for an RCU grace period, which will
wait for the entire scheduling-clock interrupt handler, including any
RCU Tasks read-side critical section that this handler might contain.
This commit therefore updates the rcu_sched_clock_irq() function's
check for usermode execution and its call to rcu_tasks_classic_qs()
to instead check for both usermode execution and interrupt from idle,
and to instead call rcu_note_voluntary_context_switch(). This
consolidates code and provides more faster RCU Tasks Trace
reporting of quiescent states in kernels that do scheduling-clock
interrupts for userspace execution.
[ paulmck: Consolidate checks into rcu_sched_clock_irq(). ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU Tasks Trace grace-period kthread loops across all CPUs, and
there can be quite a few CPUs, with some commercially available systems
sporting well over a thousand of them. Some of these loops can feature
IPIs, which can take some time. This commit therefore places a call to
cond_resched_tasks_rcu_qs() in each such loop.
Link: https://docs.google.com/document/d/1V0YnG1HTWMt9WHJjroiJL9lf-hMrud4v8Fn3fhyY0cI/edit?usp=sharing
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PROVE_RCU=y and CONFIG_DEBUG_LOCK_ALLOC=y
attempt to emit a warning when the synchronize_rcu_tasks_generic()
function is called during early boot while the rcu_scheduler_active
variable is RCU_SCHEDULER_INACTIVE. However the warnings is not
actually be printed because the debug_lockdep_rcu_enabled() returns
false, exactly because the rcu_scheduler_active variable is still equal
to RCU_SCHEDULER_INACTIVE.
This commit therefore replaces RCU_LOCKDEP_WARN() with WARN_ONCE()
to force these warnings to actually be printed.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes Tiny SRCU use full-sized grace-period counters to
further avoid counter-wrap issues when using polled grace-period APIs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit applies the more-precise grace-period-state check used by
rcu_seq_done_exact() to poll_state_synchronize_srcu(). This is important
because Tiny SRCU uses a 16-bit counter, which can wrap quite quickly.
If counter wrap continues to be a problem, then expanding ->srcu_idx
and ->srcu_idx_max to 32 bits might be warranted.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit brings the "srcud" (dynamically allocated) SRCU test in line
with the "srcu" (statically allocated) test, so that both test the full
SRCU polled grace-period API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's polled grace-period API is reasonably lightweight, but still
contains heavyweight memory barriers. This commit therefore limits
testing of this API from rcutorture's readers in order to avoid the
false negatives that these heavyweight operations could provoke.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit expands the rcu_torture_write_types() function's first "if"
condition and body, placing one element per line, in order to make the
compiler's error messages more helpful.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit changes the use of gp_poll_exp to gp_poll_exp1 in the first
check in rcu_torture_write_types(). No functional effect, but consistency
is a good thing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Large systems can have hundreds of rcu_node structures, and updating
counters in each of them might slow down booting. This commit therefore
updates only the counters in those rcu_node structures corresponding
to the boot CPU, up to and including the root rcu_node structure.
The counters for the remaining rcu_node structures are updated by the
rcu_scheduler_starting() function, which executes just before the first
non-boot kthread is spawned.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that rcu_gp_oldstate can accurately track both normal and
expedited grace periods regardless of system state, rcutorture's
rcu_poll_need_2gp() function need only call for a second grace period
for the old single-unsigned-long grace-period polling APIs
This commit therefore adjusts rcu_poll_need_2gp() accordingly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because both normal and expedited grace periods increment their respective
counters on their pre-scheduler early boot fastpaths, the rcu_gp_oldstate
structure no longer needs its ->rgos_polled field. This commit therefore
removes this field, shrinking this structure so that it is the same size
as an rcu_head structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the early boot single-CPU synchronize_rcu_expedited()
fastpath to update the rcu_state structure's ->expedited_sequence
counter. This will allow the full-state polled grace-period APIs to
detect all expedited grace periods without the need to track the special
combined polling-only counter, which is another step towards removing
the ->rgos_polled field from the rcu_gp_oldstate, thereby reducing its
size by one third.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the expedited grace-period fast path can only happen during
the pre-scheduler portion of early boot, this fast path can no longer
block run-time RCU Trace grace periods. This commit therefore removes
the conditional cond_resched() invocation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the early boot single-CPU synchronize_rcu() fastpath to
update the rcu_state and rcu_node structures' ->gp_seq and ->gp_seq_needed
counters. This will allow the full-state polled grace-period APIs to
detect all normal grace periods without the need to track the special
combined polling-only counter, which is a step towards removing the
->rgos_polled field from the rcu_gp_oldstate, thereby reducing its size
by one third.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the grace-period fast path can only happen during the
pre-scheduler portion of early boot, this fast path can no longer block
run-time RCU Tasks and RCU Tasks Trace grace periods. This commit
therefore removes the conditional cond_resched_tasks_rcu_qs() invocation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It would be good do reduce the size of the rcu_gp_oldstate structure
from three unsigned long instances to two, but this requires that the
boot-time optimized grace periods update the various ->gp_seq fields.
Updating these fields in the rcu_state structure and in all of the
rcu_node structures is at least semi-reasonable, but updating them in
all of the rcu_data structures is a bridge too far. This means that if
there are too many early boot-time grace periods, the ->gp_seq field in
the rcu_data structure cannot be trusted. This commit therefore sets
each rcu_data structure's ->gpwrap field to provide the necessary impetus
for a suitable level of distrust.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The run-time single-CPU grace-period optimization applies only to
kernels built with CONFIG_SMP=y && CONFIG_PREEMPTION=y that are running
on a single-CPU system. But a kernel intended for a single-CPU system
should instead be built with CONFIG_SMP=n, and in any case, single-CPU
systems running Linux no longer appear to be the common case. Plus this
optimization results in the rcu_gp_oldstate structure being half again
larger than it needs to be.
This commit therefore disables the run-time single-CPU grace-period
optimization, so that this optimization applies only during the
pre-scheduler portion of the boot sequence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu_expedited() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_exp_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit removes the blank line preceding the oldstate parameter to
the docbook header for the poll_state_synchronize_rcu() function and
marks uses of this parameter later in that header.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu_expedited() API compresses the combined
expedited and normal grace-period states into a single unsigned long,
which conserves storage, but can miss grace periods in certain cases
involving overlapping normal and expedited grace periods. Missing the
occasional grace period is usually not a problem, but there are use
cases that care about each and every grace period.
This commit therefore adds yet another member of the
full-state RCU grace-period polling API, which is the
start_poll_synchronize_rcu_expedited_full() function. This uses up to
three times the storage (rcu_gp_oldstate structure instead of unsigned
long), but is guaranteed not to miss grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the start_poll_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds full-state polling checks to accompany the old-style
polling checks in the rcu_torture_one_read() function. If a polling
cycle within an RCU reader completes, a WARN_ONCE() is triggered.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This check does nothing because the state at this point in the code
because the rcu_torture_writer_state value is guaranteed to instead
be RTWS_REPLACE. This commit therefore removes this check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a test to rcu_torture_writer() that verifies that a
->get_gp_state_full() and ->poll_gp_state_full() polled grace-period
sequence does not claim that a grace period elapsed within the confines
of the corresponding read-side critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Only vanilla RCU needs a double grace period for its compressed
polled grace-period old-state cookie. This commit therefore adds an
rcu_torture_ops per-flavor function ->poll_need_2gp to allow this check
to be adapted to the RCU flavor under test. A NULL pointer for this
function says that doubled grace periods are never needed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts a do_rtws_sync() function that does synchronous
grace-period testing, but also testing the polled API 25% of the time
each for the normal and full-state variants of the polled API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_state_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the get_state_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_completed_synchronize_rcu() and poll_state_synchronize_rcu()
APIs compress the combined expedited and normal grace-period states into a
single unsigned long, which conserves storage, but can miss grace periods
in certain cases involving overlapping normal and expedited grace periods.
Missing the occasional grace period is usually not a problem, but there
are use cases that care about each and every grace period.
This commit therefore adds the first members of the full-state RCU
grace-period polling API, namely the get_completed_synchronize_rcu_full()
and poll_state_synchronize_rcu_full() functions. These use up to three
times the storage (rcu_gp_oldstate structure instead of unsigned long),
but which are guaranteed not to miss grace periods, at least in situations
where the single-CPU grace-period optimization does not apply.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Offline CPUs cannot be offloaded or deoffloaded. Any attempt to offload
or deoffload an offline CPU causes a message to be printed on the console,
which is good, but this message does not contain the CPU number, which
is bad. Such a CPU number can be helpful when debugging, as it gives a
clear indication that the CPU in question is in fact offline. This commit
therefore adds the CPU number to the CPU-{,de}offload failure messages.
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The show_rcu_nocb_gp_state() function is supposed to dump out the rcuog
kthread and the show_rcu_nocb_state() function is supposed to dump out
the rcuo[ps] kthread. Currently, both do a mixture, which is not optimal
for debugging, even though it does not affect functionality.
This commit therefore adjusts these two functions to focus on their
respective kthreads.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the monitor work is scheduled with a fixed interval of HZ/20,
which is roughly 50 milliseconds. The drawback of this approach is
low utilization of the 512 page slots in scenarios with infrequence
kvfree_rcu() calls. For example on an Android system:
<snip>
kworker/3:3-507 [003] .... 470.286305: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d0f0dde5 nr_records=6
kworker/6:1-76 [006] .... 470.416613: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000ea0d6556 nr_records=1
kworker/6:1-76 [006] .... 470.416625: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000003e025849 nr_records=9
kworker/3:3-507 [003] .... 471.390000: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000815a8713 nr_records=48
kworker/1:1-73 [001] .... 471.725785: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000fda9bf20 nr_records=3
kworker/1:1-73 [001] .... 471.725833: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000a425b67b nr_records=76
kworker/0:4-1411 [000] .... 472.085673: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000007996be9d nr_records=1
kworker/0:4-1411 [000] .... 472.085728: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d0f0dde5 nr_records=5
kworker/6:1-76 [006] .... 472.260340: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000065630ee4 nr_records=102
<snip>
In many cases, out of 512 slots, fewer than 10 were actually used.
In order to improve batching and make utilization more efficient this
commit sets a drain interval to a fixed 5-seconds interval. Floods are
detected when a page fills quickly, and in that case, the reclaim work
is re-scheduled for the next scheduling-clock tick (jiffy).
After this change:
<snip>
kworker/7:1-371 [007] .... 5630.725708: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000005ab0ffb3 nr_records=121
kworker/7:1-371 [007] .... 5630.989702: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000060c84761 nr_records=47
kworker/7:1-371 [007] .... 5630.989714: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000000babf308 nr_records=510
kworker/7:1-371 [007] .... 5631.553790: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000bb7bd0ef nr_records=169
kworker/7:1-371 [007] .... 5631.553808: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044c78753 nr_records=510
kworker/5:6-9428 [005] .... 5631.746102: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d98519aa nr_records=123
kworker/4:7-9434 [004] .... 5632.001758: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000526c9d44 nr_records=322
kworker/4:7-9434 [004] .... 5632.002073: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000002c6a8afa nr_records=185
kworker/7:1-371 [007] .... 5632.277515: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000007f4a962f nr_records=510
<snip>
Here, all but one of the cases, more than one hundreds slots were used,
representing an order-of-magnitude improvement.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
As per the comments in include/linux/shrinker.h, .count_objects callback
should return the number of freeable items, but if there are no objects
to free, SHRINK_EMPTY should be returned. The only time 0 is returned
should be when we are unable to determine the number of objects, or the
cache should be skipped for another reason.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The fill_page_cache_func() function allocates couple of pages to store
kvfree_rcu_bulk_data structures. This is a lightweight (GFP_NORETRY)
allocation which can fail under memory pressure. The function will,
however keep retrying even when the previous attempt has failed.
This retrying is in theory correct, but in practice the allocation is
invoked from workqueue context, which means that if the memory reclaim
gets stuck, these retries can hog the worker for quite some time.
Although the workqueues subsystem automatically adjusts concurrency, such
adjustment is not guaranteed to happen until the worker context sleeps.
And the fill_page_cache_func() function's retry loop is not guaranteed
to sleep (see the should_reclaim_retry() function).
And we have seen this function cause workqueue lockups:
kernel: BUG: workqueue lockup - pool cpus=93 node=1 flags=0x1 nice=0 stuck for 32s!
[...]
kernel: pool 74: cpus=37 node=0 flags=0x1 nice=0 hung=32s workers=2 manager: 2146
kernel: pwq 498: cpus=249 node=1 flags=0x1 nice=0 active=4/256 refcnt=5
kernel: in-flight: 1917:fill_page_cache_func
kernel: pending: dbs_work_handler, free_work, kfree_rcu_monitor
Originally, we thought that the root cause of this lockup was several
retries with direct reclaim, but this is not yet confirmed. Furthermore,
we have seen similar lockups without any heavy memory pressure. This
suggests that there are other factors contributing to these lockups.
However, it is not really clear that endless retries are desireable.
So let's make the fill_page_cache_func() function back off after
allocation failure.
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_boost_kthread_setaffinity() function removes the outgoing CPU
from the set_cpus_allowed() mask for the corresponding leaf rcu_node
structure's rcub priority-boosting kthread. Except that if the outgoing
CPU will leave that structure without any online CPUs, the mask is set
to the housekeeping CPU mask from housekeeping_cpumask(). Which is fine
unless the outgoing CPU happens to be a housekeeping CPU.
This commit therefore removes the outgoing CPU from the housekeeping mask.
This would of course be problematic if the outgoing CPU was the last
online housekeeping CPU, but in that case you are in a world of hurt
anyway. If someone comes up with a valid use case for a system needing
all the housekeeping CPUs to be offline, further adjustments can be made.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with PREEMPT_RCU=y and RCU_STRICT_GRACE_PERIOD=y trigger
irq-work from rcu_read_unlock(), and the resulting irq-work handler
invokes rcu_preempt_deferred_qs_handle(). The point of this triggering
is to force grace periods to end quickly in order to give tools like KASAN
a better chance of detecting RCU usage bugs such as leaking RCU-protected
pointers out of an RCU read-side critical section.
However, this irq-work triggering is unconditional. This works, but
there is no point in doing this irq-work unless the current grace period
is waiting on the running CPU or task, which is not the common case.
After all, in the common case there are many rcu_read_unlock() calls
per CPU per grace period.
This commit therefore triggers the irq-work only when the current grace
period is waiting on the running CPU or task.
This change was tested as follows on a four-CPU system:
echo rcu_preempt_deferred_qs_handler > /sys/kernel/debug/tracing/set_ftrace_filter
echo 1 > /sys/kernel/debug/tracing/function_profile_enabled
insmod rcutorture.ko
sleep 20
rmmod rcutorture.ko
echo 0 > /sys/kernel/debug/tracing/function_profile_enabled
echo > /sys/kernel/debug/tracing/set_ftrace_filter
This procedure produces results in this per-CPU set of files:
/sys/kernel/debug/tracing/trace_stat/function*
Sample output from one of these files is as follows:
Function Hit Time Avg s^2
-------- --- ---- --- ---
rcu_preempt_deferred_qs_handle 838746 182650.3 us 0.217 us 0.004 us
The baseline sum of the "Hit" values (the number of calls to this
function) was 3,319,015. With this commit, that sum was 1,140,359,
for a 2.9x reduction. The worst-case variance across the CPUs was less
than 25%, so this large effect size is statistically significant.
The raw data is available in the Link: URL.
Link: https://lore.kernel.org/all/20220808022626.12825-1-qiang1.zhang@intel.com/
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The dump_cpu_task() function does not print registers on architectures
that do not support NMIs. However, registers can be useful for
debugging. Fortunately, in the case where dump_cpu_task() is invoked
from an interrupt handler and is dumping the current CPU's stack, the
get_irq_regs() function can be used to get the registers.
Therefore, this commit makes dump_cpu_task() check to see if it is being
asked to dump the current CPU's stack from within an interrupt handler,
and, if so, it uses the get_irq_regs() function to obtain the registers.
On systems that do support NMIs, this commit has the further advantage
of avoiding a self-NMI in this case.
This is an example of rcu self-detected stall on arm64, which does not
support NMIs:
[ 27.501721] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 27.502238] rcu: 0-....: (1250 ticks this GP) idle=4f7/1/0x4000000000000000 softirq=2594/2594 fqs=619
[ 27.502632] (t=1251 jiffies g=2989 q=29 ncpus=4)
[ 27.503845] CPU: 0 PID: 306 Comm: test0 Not tainted 5.19.0-rc7-00009-g1c1a6c29ff99-dirty #46
[ 27.504732] Hardware name: linux,dummy-virt (DT)
[ 27.504947] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 27.504998] pc : arch_counter_read+0x18/0x24
[ 27.505301] lr : arch_counter_read+0x18/0x24
[ 27.505328] sp : ffff80000b29bdf0
[ 27.505345] x29: ffff80000b29bdf0 x28: 0000000000000000 x27: 0000000000000000
[ 27.505475] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 27.505553] x23: 0000000000001f40 x22: ffff800009849c48 x21: 000000065f871ae0
[ 27.505627] x20: 00000000000025ec x19: ffff80000a6eb300 x18: ffffffffffffffff
[ 27.505654] x17: 0000000000000001 x16: 0000000000000000 x15: ffff80000a6d0296
[ 27.505681] x14: ffffffffffffffff x13: ffff80000a29bc18 x12: 0000000000000426
[ 27.505709] x11: 0000000000000162 x10: ffff80000a2f3c18 x9 : ffff80000a29bc18
[ 27.505736] x8 : 00000000ffffefff x7 : ffff80000a2f3c18 x6 : 00000000759bd013
[ 27.505761] x5 : 01ffffffffffffff x4 : 0002dc6c00000000 x3 : 0000000000000017
[ 27.505787] x2 : 00000000000025ec x1 : ffff80000b29bdf0 x0 : 0000000075a30653
[ 27.505937] Call trace:
[ 27.506002] arch_counter_read+0x18/0x24
[ 27.506171] ktime_get+0x48/0xa0
[ 27.506207] test_task+0x70/0xf0
[ 27.506227] kthread+0x10c/0x110
[ 27.506243] ret_from_fork+0x10/0x20
This is a marked improvement over the old output:
[ 27.944550] rcu: INFO: rcu_preempt self-detected stall on CPU
[ 27.944980] rcu: 0-....: (1249 ticks this GP) idle=cbb/1/0x4000000000000000 softirq=2610/2610 fqs=614
[ 27.945407] (t=1251 jiffies g=2681 q=28 ncpus=4)
[ 27.945731] Task dump for CPU 0:
[ 27.945844] task:test0 state:R running task stack: 0 pid: 306 ppid: 2 flags:0x0000000a
[ 27.946073] Call trace:
[ 27.946151] dump_backtrace.part.0+0xc8/0xd4
[ 27.946378] show_stack+0x18/0x70
[ 27.946405] sched_show_task+0x150/0x180
[ 27.946427] dump_cpu_task+0x44/0x54
[ 27.947193] rcu_dump_cpu_stacks+0xec/0x130
[ 27.947212] rcu_sched_clock_irq+0xb18/0xef0
[ 27.947231] update_process_times+0x68/0xac
[ 27.947248] tick_sched_handle+0x34/0x60
[ 27.947266] tick_sched_timer+0x4c/0xa4
[ 27.947281] __hrtimer_run_queues+0x178/0x360
[ 27.947295] hrtimer_interrupt+0xe8/0x244
[ 27.947309] arch_timer_handler_virt+0x38/0x4c
[ 27.947326] handle_percpu_devid_irq+0x88/0x230
[ 27.947342] generic_handle_domain_irq+0x2c/0x44
[ 27.947357] gic_handle_irq+0x44/0xc4
[ 27.947376] call_on_irq_stack+0x2c/0x54
[ 27.947415] do_interrupt_handler+0x80/0x94
[ 27.947431] el1_interrupt+0x34/0x70
[ 27.947447] el1h_64_irq_handler+0x18/0x24
[ 27.947462] el1h_64_irq+0x64/0x68 <--- the above backtrace is worthless
[ 27.947474] arch_counter_read+0x18/0x24
[ 27.947487] ktime_get+0x48/0xa0
[ 27.947501] test_task+0x70/0xf0
[ 27.947520] kthread+0x10c/0x110
[ 27.947538] ret_from_fork+0x10/0x20
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
The trigger_all_cpu_backtrace() function attempts to send an NMI to the
target CPU, which usually provides much better stack traces than the
dump_cpu_task() function's approach of dumping that stack from some other
CPU. So much so that most calls to dump_cpu_task() only happen after
a call to trigger_all_cpu_backtrace() has failed. And the exception to
this rule really should attempt to use trigger_all_cpu_backtrace() first.
Therefore, move the trigger_all_cpu_backtrace() invocation into
dump_cpu_task().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Given that rcu_all_qs() is in non-preemptible kernels, why on earth should
it invoke preempt_disable()? This commit adds the reason, which is to
work nicely with debugging enabled in CONFIG_PREEMPT_COUNT=y kernels.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, only Tree RCU leaks callbacks setting when it detects a
duplicate call_rcu(). This commit causes Tiny RCU to also leak
callbacks in this situation.
Because this is Tiny RCU, kernel size is important:
1. CONFIG_TINY_RCU=y and CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
(Production kernel)
Original:
text data bss dec hex filename
26290663 20159823 15212544 61663030 3ace736 vmlinux
With this commit:
text data bss dec hex filename
26290663 20159823 15212544 61663030 3ace736 vmlinux
2. CONFIG_TINY_RCU=y and CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
(Debugging kernel)
Original:
text data bss dec hex filename
26291319 20160143 15212544 61664006 3aceb06 vmlinux
With this commit:
text data bss dec hex filename
26291319 20160431 15212544 61664294 3acec26 vmlinux
These results show that the kernel size is unchanged for production
kernels, as desired.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PREEMPTION=n and CONFIG_PREEMPT_COUNT=y maintain
preempt_count() state. Because such kernels map __rcu_read_lock()
and __rcu_read_unlock() to preempt_disable() and preempt_enable(),
respectively, this allows the expedited grace period's !CONFIG_PREEMPT_RCU
version of the rcu_exp_handler() IPI handler function to use
preempt_count() to detect quiescent states.
This preempt_count() usage might seem to risk failures due to
use of implicit RCU readers in portions of the kernel under #ifndef
CONFIG_PREEMPTION, except that rcu_core() already disallows such implicit
RCU readers. The moral of this story is that you must use explicit
read-side markings such as rcu_read_lock() or preempt_disable() even if
the code knows that this kernel does not support preemption.
This commit therefore adds a preempt_count()-based check for a quiescent
state in the !CONFIG_PREEMPT_RCU version of the rcu_exp_handler()
function for kernels built with CONFIG_PREEMPT_COUNT=y, reporting an
immediate quiescent state when the interrupted code had both preemption
and softirqs enabled.
This change results in about a 2% reduction in expedited grace-period
latency in kernels built with both CONFIG_PREEMPT_RCU=n and
CONFIG_PREEMPT_COUNT=y.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20220622103549.2840087-1-qiang1.zhang@intel.com/
In non-premptible kernels, tasks never do context switches within
RCU read-side critical sections. Therefore, in such kernels, each
leaf rcu_node structure's ->blkd_tasks list will always be empty.
The comment on the non-preemptible version of rcu_preempt_deferred_qs()
confuses this point, so this commit therefore fixes it.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PREEMPT=n and CONFIG_RCU_STRICT_GRACE_PERIOD=y
report the quiescent state directly from the outermost rcu_read_unlock().
However, the current CPU's rcu_data structure's ->cpu_no_qs.b.norm
might still be set, in which case rcu_report_qs_rdp() will exit early,
thus failing to report quiescent state.
This commit therefore causes rcu_read_unlock_strict() to clear
CPU's rcu_data structure's ->cpu_no_qs.b.norm field before invoking
rcu_report_qs_rdp().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We can still see that a majority of the time is spent hashing task pointers:
...
16.98% [kernel] [k] rhashtable_jhash2
...
Doing the bookkeeping in toggle_bp_slots() is currently O(#cpus),
calling task_bp_pinned() for each CPU, even if task_bp_pinned() is
CPU-independent. The reason for this is to update the per-CPU
'tsk_pinned' histogram.
To optimize the CPU-independent case to O(1), keep a separate
CPU-independent 'tsk_pinned_all' histogram.
The major source of complexity are transitions between "all
CPU-independent task breakpoints" and "mixed CPU-independent and
CPU-dependent task breakpoints". The code comments list all cases that
require handling.
After this optimization:
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.758 [sec]
|
| 34.336621 usecs/op
| 4395.087500 usecs/op/cpu
38.08% [kernel] [k] queued_spin_lock_slowpath
10.81% [kernel] [k] smp_cfm_core_cond
3.01% [kernel] [k] update_sg_lb_stats
2.58% [kernel] [k] osq_lock
2.57% [kernel] [k] llist_reverse_order
1.45% [kernel] [k] find_next_bit
1.21% [kernel] [k] flush_tlb_func_common
1.01% [kernel] [k] arch_install_hw_breakpoint
Showing that the time spent hashing keys has become insignificant.
With the given benchmark parameters, that's an improvement of 12%
compared with the old O(#cpus) version.
And finally, using the less aggressive parameters from the preceding
changes, we now observe:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.067 [sec]
|
| 35.292187 usecs/op
| 2258.700000 usecs/op/cpu
Which is an improvement of 12% compared to without the histogram
optimizations (baseline is 40 usecs/op). This is now on par with the
theoretical ideal (constraints disabled), and only 12% slower than no
breakpoints at all.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-15-elver@google.com
Running the perf benchmark with (note: more aggressive parameters vs.
preceding changes, but same 256 CPUs host):
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.989 [sec]
|
| 38.854160 usecs/op
| 4973.332500 usecs/op/cpu
20.43% [kernel] [k] queued_spin_lock_slowpath
18.75% [kernel] [k] osq_lock
16.98% [kernel] [k] rhashtable_jhash2
8.34% [kernel] [k] task_bp_pinned
4.23% [kernel] [k] smp_cfm_core_cond
3.65% [kernel] [k] bcmp
2.83% [kernel] [k] toggle_bp_slot
1.87% [kernel] [k] find_next_bit
1.49% [kernel] [k] __reserve_bp_slot
We can see that a majority of the time is now spent hashing task
pointers to index into task_bps_ht in task_bp_pinned().
Obtaining the max_bp_pinned_slots() for CPU-independent task targets
currently is O(#cpus), and calls task_bp_pinned() for each CPU, even if
the result of task_bp_pinned() is CPU-independent.
The loop in max_bp_pinned_slots() wants to compute the maximum slots
across all CPUs. If task_bp_pinned() is CPU-independent, we can do so by
obtaining the max slots across all CPUs and adding task_bp_pinned().
To do so in O(1), use a bp_slots_histogram for CPU-pinned slots.
After this optimization:
| $> perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 100 threads with 4 breakpoints and 128 parallelism
| Total time: 1.930 [sec]
|
| 37.697832 usecs/op
| 4825.322500 usecs/op/cpu
19.13% [kernel] [k] queued_spin_lock_slowpath
18.21% [kernel] [k] rhashtable_jhash2
15.46% [kernel] [k] osq_lock
6.27% [kernel] [k] toggle_bp_slot
5.91% [kernel] [k] task_bp_pinned
5.05% [kernel] [k] smp_cfm_core_cond
1.78% [kernel] [k] update_sg_lb_stats
1.36% [kernel] [k] llist_reverse_order
1.34% [kernel] [k] find_next_bit
1.19% [kernel] [k] bcmp
Suggesting that time spent in task_bp_pinned() has been reduced.
However, we're still hashing too much, which will be addressed in the
subsequent change.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-14-elver@google.com
Factor out the existing `atomic_t count[N]` into its own struct called
'bp_slots_histogram', to generalize and make its intent clearer in
preparation of reusing elsewhere. The basic idea of bucketing "total
uses of N slots" resembles a histogram, so calling it such seems most
intuitive.
No functional change.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-13-elver@google.com
While optimizing task_bp_pinned()'s runtime complexity to O(1) on
average helps reduce time spent in the critical section, we still suffer
due to serializing everything via 'nr_bp_mutex'. Indeed, a profile shows
that now contention is the biggest issue:
95.93% [kernel] [k] osq_lock
0.70% [kernel] [k] mutex_spin_on_owner
0.22% [kernel] [k] smp_cfm_core_cond
0.18% [kernel] [k] task_bp_pinned
0.18% [kernel] [k] rhashtable_jhash2
0.15% [kernel] [k] queued_spin_lock_slowpath
when running the breakpoint benchmark with (system with 256 CPUs):
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.207 [sec]
|
| 108.267188 usecs/op
| 6929.100000 usecs/op/cpu
The main concern for synchronizing the breakpoint constraints data is
that a consistent snapshot of the per-CPU and per-task data is observed.
The access pattern is as follows:
1. If the target is a task: the task's pinned breakpoints are counted,
checked for space, and then appended to; only bp_cpuinfo::cpu_pinned
is used to check for conflicts with CPU-only breakpoints;
bp_cpuinfo::tsk_pinned are incremented/decremented, but otherwise
unused.
2. If the target is a CPU: bp_cpuinfo::cpu_pinned are counted, along
with bp_cpuinfo::tsk_pinned; after a successful check, cpu_pinned is
incremented. No per-task breakpoints are checked.
Since rhltable safely synchronizes insertions/deletions, we can allow
concurrency as follows:
1. If the target is a task: independent tasks may update and check the
constraints concurrently, but same-task target calls need to be
serialized; since bp_cpuinfo::tsk_pinned is only updated, but not
checked, these modifications can happen concurrently by switching
tsk_pinned to atomic_t.
2. If the target is a CPU: access to the per-CPU constraints needs to
be serialized with other CPU-target and task-target callers (to
stabilize the bp_cpuinfo::tsk_pinned snapshot).
We can allow the above concurrency by introducing a per-CPU constraints
data reader-writer lock (bp_cpuinfo_sem), and per-task mutexes (reuses
task_struct::perf_event_mutex):
1. If the target is a task: acquires perf_event_mutex, and acquires
bp_cpuinfo_sem as a reader. The choice of percpu-rwsem minimizes
contention in the presence of many read-lock but few write-lock
acquisitions: we assume many orders of magnitude more task target
breakpoints creations/destructions than CPU target breakpoints.
2. If the target is a CPU: acquires bp_cpuinfo_sem as a writer.
With these changes, contention with thousands of tasks is reduced to the
point where waiting on locking no longer dominates the profile:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.077 [sec]
|
| 40.201563 usecs/op
| 2572.900000 usecs/op/cpu
21.54% [kernel] [k] task_bp_pinned
20.18% [kernel] [k] rhashtable_jhash2
6.81% [kernel] [k] toggle_bp_slot
5.47% [kernel] [k] queued_spin_lock_slowpath
3.75% [kernel] [k] smp_cfm_core_cond
3.48% [kernel] [k] bcmp
On this particular setup that's a speedup of 2.7x.
We're also getting closer to the theoretical ideal performance through
optimizations in hw_breakpoint.c -- constraints accounting disabled:
| perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.067 [sec]
|
| 35.286458 usecs/op
| 2258.333333 usecs/op/cpu
Which means the current implementation is ~12% slower than the
theoretical ideal.
For reference, performance without any breakpoints:
| $> bench -r 30 breakpoint thread -b 0 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 0 breakpoints and 64 parallelism
| Total time: 0.060 [sec]
|
| 31.365625 usecs/op
| 2007.400000 usecs/op/cpu
On a system with 256 CPUs, the theoretical ideal is only ~12% slower
than no breakpoints at all; the current implementation is ~28% slower.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-12-elver@google.com
Flexible breakpoints have never been implemented, with
bp_cpuinfo::flexible always being 0. Unfortunately, they still occupy 4
bytes in each bp_cpuinfo and bp_busy_slots, as well as computing the max
flexible count in fetch_bp_busy_slots().
This again causes suboptimal code generation, when we always know that
`!!slots.flexible` will be 0.
Just get rid of the flexible "placeholder" and remove all real code
related to it. Make a note in the comment related to the constraints
algorithm but don't remove them from the algorithm, so that if in future
flexible breakpoints need supporting, it should be trivial to revive
them (along with reverting this change).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-9-elver@google.com
Due to being a __weak function, hw_breakpoint_weight() will cause the
compiler to always emit a call to it. This generates unnecessarily bad
code (register spills etc.) for no good reason; in fact it appears in
profiles of `perf bench -r 100 breakpoint thread -b 4 -p 128 -t 512`:
...
0.70% [kernel] [k] hw_breakpoint_weight
...
While a small percentage, no architecture defines its own
hw_breakpoint_weight() nor are there users outside hw_breakpoint.c,
which makes the fact it is currently __weak a poor choice.
Change hw_breakpoint_weight()'s definition to follow a similar protocol
to hw_breakpoint_slots(), such that if <asm/hw_breakpoint.h> defines
hw_breakpoint_weight(), we'll use it instead.
The result is that it is inlined and no longer shows up in profiles.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-8-elver@google.com
Optimize internal hw_breakpoint state if the architecture's number of
breakpoint slots is constant. This avoids several kmalloc() calls and
potentially unnecessary failures if the allocations fail, as well as
subtly improves code generation and cache locality.
The protocol is that if an architecture defines hw_breakpoint_slots via
the preprocessor, it must be constant and the same for all types.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-7-elver@google.com
Mark read-only data after initialization as __ro_after_init.
While we are here, turn 'constraints_initialized' into a bool.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-6-elver@google.com
On a machine with 256 CPUs, running the recently added perf breakpoint
benchmark results in:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 236.418 [sec]
|
| 123134.794271 usecs/op
| 7880626.833333 usecs/op/cpu
The benchmark tests inherited breakpoint perf events across many
threads.
Looking at a perf profile, we can see that the majority of the time is
spent in various hw_breakpoint.c functions, which execute within the
'nr_bp_mutex' critical sections which then results in contention on that
mutex as well:
37.27% [kernel] [k] osq_lock
34.92% [kernel] [k] mutex_spin_on_owner
12.15% [kernel] [k] toggle_bp_slot
11.90% [kernel] [k] __reserve_bp_slot
The culprit here is task_bp_pinned(), which has a runtime complexity of
O(#tasks) due to storing all task breakpoints in the same list and
iterating through that list looking for a matching task. Clearly, this
does not scale to thousands of tasks.
Instead, make use of the "rhashtable" variant "rhltable" which stores
multiple items with the same key in a list. This results in average
runtime complexity of O(1) for task_bp_pinned().
With the optimization, the benchmark shows:
| $> perf bench -r 30 breakpoint thread -b 4 -p 64 -t 64
| # Running 'breakpoint/thread' benchmark:
| # Created/joined 30 threads with 4 breakpoints and 64 parallelism
| Total time: 0.208 [sec]
|
| 108.422396 usecs/op
| 6939.033333 usecs/op/cpu
On this particular setup that's a speedup of ~1135x.
While one option would be to make task_struct a breakpoint list node,
this would only further bloat task_struct for infrequently used data.
Furthermore, after all optimizations in this series, there's no evidence
it would result in better performance: later optimizations make the time
spent looking up entries in the hash table negligible (we'll reach the
theoretical ideal performance i.e. no constraints).
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-5-elver@google.com
Clean up headers:
- Remove unused <linux/kallsyms.h>
- Remove unused <linux/kprobes.h>
- Remove unused <linux/module.h>
- Remove unused <linux/smp.h>
- Add <linux/export.h> for EXPORT_SYMBOL_GPL().
- Add <linux/mutex.h> for mutex.
- Sort alphabetically.
- Move <linux/hw_breakpoint.h> to top to test it compiles on its own.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-4-elver@google.com
Provide hw_breakpoint_is_used() to check if breakpoints are in use on
the system.
Use it in the KUnit test to verify the global state before and after a
test case.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-3-elver@google.com
Add KUnit test for hw_breakpoint constraints accounting, with various
interesting mixes of breakpoint targets (some care was taken to catch
interesting corner cases via bug-injection).
The test cannot be built as a module because it requires access to
hw_breakpoint_slots(), which is not inlinable or exported on all
architectures.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20220829124719.675715-2-elver@google.com
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
cc:stable, addressing pre-6.0 issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYwvgrAAKCRDdBJ7gKXxA
jlweAQC9dzE08Elxl4F7Uvxe+62JWVeflBRrT7sJ6jU1Gu3QcQEAhhI1Xit3/MGq
pRytDBObGADxlA67c9eNq6J5pCT/7gE=
=pD67
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
The rest of the kallsyms symbols are useless without knowing the number of
symbols in the table. In an earlier patch, I somehow dropped the
kallsyms_num_syms symbol, so add it back in.
Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com
Fixes: 5fd8fea935 ("vmcoreinfo: include kallsyms symbols")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=j67g
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220826' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"Another small audit patch, this time to fix a bug where the return
codes were not properly set before the audit filters were run,
potentially resulting in missed audit records"
* tag 'audit-pr-20220826' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: move audit_return_fixup before the filters
Wrap repeated code in helper function update_current_exec_runtime for
update the exec time of the current.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220824082856.15674-1-shangxiaojing@huawei.com
Since audit_proctitle is generated at syscall exit time, its value is
used immediately and cached for the next syscall. Since this is the
case, then only clear it at task exit time. Otherwise, there is no
point in caching the value OR bearing the overhead of regenerating it.
Fixes: 12c5e81d3f ("audit: prepare audit_context for use in calling contexts beyond syscalls")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Be explicit in checking the struct audit_context "context" member enum
value rather than assuming the order of context enum values.
Fixes: 12c5e81d3f ("audit: prepare audit_context for use in calling contexts beyond syscalls")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The pid member of struct audit_context is never used. Remove it.
The audit_reset_context() comment about unconditionally resetting
"ctx->state" should read "ctx->context".
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Cgroup id is user provided datum hence extend its return domain to
include possible error reason (similar to cgroup_get_from_fd()).
This change also fixes commit d4ccaf58a8 ("bpf: Introduce cgroup
iter") that would use NULL instead of proper error handling in
d4ccaf58a8 ("bpf: Introduce cgroup iter").
Additionally, neither of: fc_appid_store, bpf_iter_attach_cgroup,
mem_cgroup_get_from_ino (callers of cgroup_get_from_fd) is built without
CONFIG_CGROUPS (depends via CONFIG_BLK_CGROUP, direct, transitive
CONFIG_MEMCG respectively) transitive, so drop the singular definition
not needed with !CONFIG_CGROUPS.
Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup ids are resolved in the global scope. That may be needed sometime
(in future) but currently it violates virtual view provided through
cgroup namespaces.
There are currently following users of the resolution:
- fc_appid_store
- bpf_iter_attach_cgroup
- mem_cgroup_get_from_ino
None of the is a called on behalf of kernel but the resolution is made
with proper userspace context, hence the default to current->nsproxy
makes sens. (This doesn't rule out cgroup_get_from_id with cgroup NS
parameter in the future.)
Since cgroup ids are defined on v2 hierarchy only, we simply check
existence in the cgroup namespace by looking at ancestry on the default
hierarchy.
Fixes: 6b658c4863 ("scsi: cgroup: Add cgroup_get_from_id()")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_get_from_path() is not widely used function. Its callers presume
the path is resolved under cgroup namespace. (There is one caller
currently and resolving in init NS won't make harm (netfilter). However,
future users may be subject to different effects when resolving
globally.)
Since, there's currently no use for the global resolution, modify the
existing function to take cgroup NS into account.
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are several places in the kernel where wait_on_bit is not followed
by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read).
On architectures with weak memory ordering, it may happen that memory
accesses that follow wait_on_bit are reordered before wait_on_bit and
they may return invalid data.
Fix this class of bugs by introducing a new function "test_bit_acquire"
that works like test_bit, but has acquire memory ordering semantics.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel borkmann says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).
The main changes are:
1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.
2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.
3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.
4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.
5) Fix range tracking for array poke descriptors, from Daniel Borkmann.
6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.
7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.
8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.
9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add BPF_MAP_GET_FD_BY_ID and BPF_MAP_DELETE_PROG.
Only BPF_MAP_GET_FD_BY_ID needs to be amended to be able
to access the bpf pointer either from the userspace or the kernel.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220824134055.1328882-7-benjamin.tissoires@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_cgroup_iter_order is globally visible but the entries do not have
CGROUP prefix. As requested by Andrii, put a CGROUP in the names
in bpf_cgroup_iter_order.
This patch fixes two previous commits: one introduced the API and
the other uses the API in bpf selftest (that is, the selftest
cgroup_hierarchical_stats).
I tested this patch via the following command:
test_progs -t cgroup,iter,btf_dump
Fixes: d4ccaf58a8 ("bpf: Introduce cgroup iter")
Fixes: 88886309d2 ("selftests/bpf: add a selftest for cgroup hierarchical stats collection")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220825223936.1865810-1-haoluo@google.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which
is based on a customized syzkaller:
BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0
Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489
CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x9c/0xc9
print_address_description.constprop.0+0x1f/0x1f0
? bpf_int_jit_compile+0x1257/0x13f0
kasan_report.cold+0xeb/0x197
? kvmalloc_node+0x170/0x200
? bpf_int_jit_compile+0x1257/0x13f0
bpf_int_jit_compile+0x1257/0x13f0
? arch_prepare_bpf_dispatcher+0xd0/0xd0
? rcu_read_lock_sched_held+0x43/0x70
bpf_prog_select_runtime+0x3e8/0x640
? bpf_obj_name_cpy+0x149/0x1b0
bpf_prog_load+0x102f/0x2220
? __bpf_prog_put.constprop.0+0x220/0x220
? find_held_lock+0x2c/0x110
? __might_fault+0xd6/0x180
? lock_downgrade+0x6e0/0x6e0
? lock_is_held_type+0xa6/0x120
? __might_fault+0x147/0x180
__sys_bpf+0x137b/0x6070
? bpf_perf_link_attach+0x530/0x530
? new_sync_read+0x600/0x600
? __fget_files+0x255/0x450
? lock_downgrade+0x6e0/0x6e0
? fput+0x30/0x1a0
? ksys_write+0x1a8/0x260
__x64_sys_bpf+0x7a/0xc0
? syscall_enter_from_user_mode+0x21/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f917c4e2c2d
The problem here is that a range of tnum_range(0, map->max_entries - 1) has
limited ability to represent the concrete tight range with the tnum as the
set of resulting states from value + mask can result in a superset of the
actual intended range, and as such a tnum_in(range, reg->var_off) check may
yield true when it shouldn't, for example tnum_range(0, 2) would result in
00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here
represented by a less precise superset of {0, 1, 2, 3}. As the register is
known const scalar, really just use the concrete reg->var_off.value for the
upper index check.
Fixes: d2e4c1e6c2 ("bpf: Constant map key tracking for prog array pokes")
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The success and return_code are needed by the filters. Move
audit_return_fixup() before the filters. This was causing syscall
auditing events to be missed.
Link: https://github.com/linux-audit/audit-kernel/issues/138
Cc: stable@vger.kernel.org
Fixes: 12c5e81d3f ("audit: prepare audit_context for use in calling contexts beyond syscalls")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: manual merge required]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.
To show a concrete example of the problem:
0000000000000000 <prog>:
0: r2 = *(u32 *)(r1 + 80)
1: r1 = *(u32 *)(r1 + 76)
2: r3 = r1
3: r3 += 4
4: if r3 > r2 goto +18 <LBB5_5>
5: w2 = 0
6: *(u32 *)(r1 + 0) = r2
7: r1 = *(u32 *)(r1 + 0)
8: r2 = 1
9: if w1 == 0 goto +1 <LBB5_3>
10: r2 = -1
0000000000000058 <LBB5_3>:
11: r1 = 0 ll
13: r3 = 0
14: call bpf_ringbuf_reserve
15: if r0 == 0 goto +7 <LBB5_5>
16: r1 = r0
17: r1 += 16777215
18: w2 = 0
19: *(u8 *)(r1 + 0) = r2
20: r1 = r0
21: r2 = 0
22: call bpf_ringbuf_submit
00000000000000b8 <LBB5_5>:
23: w0 = 0
24: exit
For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.
If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.
The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.
Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).
A simplified test case has been included in the next patch to prevent
future regressions.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823185300.406-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable bpf programs to make use of rstat to collect cgroup hierarchical
stats efficiently:
- Add cgroup_rstat_updated() kfunc, for bpf progs that collect stats.
- Add cgroup_rstat_flush() sleepable kfunc, for bpf progs that read stats.
- Add an empty bpf_rstat_flush() hook that is called during rstat
flushing, for bpf progs that flush stats to attach to. Attaching a bpf
prog to this hook effectively registers it as a flush callback.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-4-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
deadlock") in the previous fix pull required cgroup core to grab
cpus_read_lock() before invoking ->attach(). Unfortunately, it missed adding
cpus_read_lock() in cgroup_attach_task_all(). Fix it.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYwe0GA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGee0AP9jrsUgnmis/PzqyyPlkD95rRSDyyUNjMjfHnJe
HW+YbgD/XcEo1eJvijqP1g/ZJhRKQl6vA1JSMgnL9obc3wNpGg8=
=7LzT
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull another cgroup fix from Tejun Heo:
"Commit 4f7e723643 ("cgroup: Fix threadgroup_rwsem <->
cpus_read_lock() deadlock") required the cgroup
core to grab cpus_read_lock() before invoking ->attach().
Unfortunately, it missed adding cpus_read_lock() in
cgroup_attach_task_all(). Fix it"
* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
Currently, verifier verifies callback functions (sync and async) as if
they will be executed once, (i.e. it explores execution state as if the
function was being called once). The next insn to explore is set to
start of subprog and the exit from nested frame is handled using
curframe > 0 and prepare_func_exit. In case of async callback it uses a
customized variant of push_stack simulating a kind of branch to set up
custom state and execution context for the async callback.
While this approach is simple and works when callback really will be
executed only once, it is unsafe for all of our current helpers which
are for_each style, i.e. they execute the callback multiple times.
A callback releasing acquired references of the caller may do so
multiple times, but currently verifier sees it as one call inside the
frame, which then returns to caller. Hence, it thinks it released some
reference that the cb e.g. got access through callback_ctx (register
filled inside cb from spilled typed register on stack).
Similarly, it may see that an acquire call is unpaired inside the
callback, so the caller will copy the reference state of callback and
then will have to release the register with new ref_obj_ids. But again,
the callback may execute multiple times, but the verifier will only
account for acquired references for a single symbolic execution of the
callback, which will cause leaks.
Note that for async callback case, things are different. While currently
we have bpf_timer_set_callback which only executes it once, even for
multiple executions it would be safe, as reference state is NULL and
check_reference_leak would force program to release state before
BPF_EXIT. The state is also unaffected by analysis for the caller frame.
Hence async callback is safe.
Since we want the reference state to be accessible, e.g. for pointers
loaded from stack through callback_ctx's PTR_TO_STACK, we still have to
copy caller's reference_state to callback's bpf_func_state, but we
enforce that whatever references it adds to that reference_state has
been released before it hits BPF_EXIT. This requires introducing a new
callback_ref member in the reference state to distinguish between caller
vs callee references. Hence, check_reference_leak now errors out if it
sees we are in callback_fn and we have not released callback_ref refs.
Since there can be multiple nested callbacks, like frame 0 -> cb1 -> cb2
etc. we need to also distinguish between whether this particular ref
belongs to this callback frame or parent, and only error for our own, so
we store state->frameno (which is always non-zero for callbacks).
In short, callbacks can read parent reference_state, but cannot mutate
it, to be able to use pointers acquired by the caller. They must only
undo their changes (by releasing their own acquired_refs before
BPF_EXIT) on top of caller reference_state before returning (at which
point the caller and callback state will match anyway, so no need to
copy it back to caller).
Fixes: 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013125.24938-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix build warning for when MODULES and FTRACE_WITH_DIRECT_CALLS are not
set. A warning happens with ops_references_rec() defined but not used.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwTkGhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtUTAP4tOmf0I0c+GsWTzpecvv7fa+9rxmZa
SfBuoPqzC/TBqAEArqaf91+57aehCrJC3X5HaE7OJisW9nd2Epnvrpxk4QY=
=0yZV
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix build warning for when MODULES and FTRACE_WITH_DIRECT_CALLS are
not set. A warning happens with ops_references_rec() defined but not
used.
* tag 'trace-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix build warning for ops_references_rec() not used
Contains fixes for the following issues:
* psi data structure was changed to be allocated dynamically but it wasn't
being cleared leading to reporting garbage values and triggering spurious
oom kills.
* A deadlock involving cpuset and cpu hotplug.
* When a controller is moved across cgroup hierarchies, css->rstat_css_node
didn't get RCU drained properly from the previous list.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYwVmRg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGb/eAP44dr9/OQtapKm63H/qmLF39LWE6nC99RYHECl5
ncuZvwD/XIkZt212nr/qC1C0ggB5qCGG7tIZG6tIgkS+J5huqg4=
=CC/Y
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- The psi data structure was changed to be allocated dynamically but
it wasn't being cleared leading to it reporting garbage values and
triggering spurious oom kills.
- A deadlock involving cpuset and cpu hotplug.
- When a controller is moved across cgroup hierarchies,
css->rstat_css_node didn't get RCU drained properly from the previous
list.
* tag 'cgroup-for-6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix race condition at rebind_subsystems()
cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock
sched/psi: Remove redundant cgroup_psi() when !CONFIG_CGROUPS
sched/psi: Remove unused parameter nbytes of psi_trigger_create()
sched/psi: Zero the memory of struct psi_group
-----BEGIN PGP SIGNATURE-----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=j0DY
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220823' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single fix for a potential double-free on a fsnotify error path"
* tag 'audit-pr-20220823' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential double free on error path from fsnotify_add_inode_mark
They would require func_info which needs prog BTF anyway. Loading BTF
and setting the prog btf_fd while loading the prog indirectly requires
CAP_BPF, so just to reduce confusion, move both these helpers taking
callback under bpf_capable() protection as well, since they cannot be
used without CAP_BPF.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013117.24916-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_strncmp is already exposed everywhere. The motivation is to keep
those helpers in kernel/bpf/helpers.c. Otherwise it's tempting to move
them under kernel/bpf/cgroup.c because they are currently only used
by sysctl prog types.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-4-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following hooks are per-cgroup hooks but they are not
using cgroup_{common,current}_func_proto, fix it:
* BPF_PROG_TYPE_CGROUP_SKB (cg_skb)
* BPF_PROG_TYPE_CGROUP_SOCK_ADDR (cg_sock_addr)
* BPF_PROG_TYPE_CGROUP_SOCK (cg_sock)
* BPF_PROG_TYPE_LSM+BPF_LSM_CGROUP
Also:
* move common func_proto's into cgroup func_proto handlers
* make sure bpf_{g,s}et_retval are not accessible from recvmsg,
getpeername and getsockname (return/errno is ignored in these
places)
* as a side effect, expose get_current_pid_tgid, get_current_comm_proto,
get_current_ancestor_cgroup_id, get_cgroup_classid to more cgroup
hooks
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split cgroup_base_func_proto into the following:
* cgroup_common_func_proto - common helpers for all cgroup hooks
* cgroup_current_func_proto - common helpers for all cgroup hooks
running in the process context (== have meaningful 'current').
Move bpf_{g,s}et_retval and other cgroup-related helpers into
kernel/bpf/cgroup.c so they closer to where they are being used.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220823222555.523590-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While reading bpf_jit_limit, it can be changed concurrently via sysctl,
WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit
is long, so we need to add a paired READ_ONCE() to avoid load-tearing.
Fixes: ede95a63b5 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220823215804.2177-1-kuniyu@amazon.com
remainder fix up the changes which went into this -rc cycle.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYwQZcgAKCRDdBJ7gKXxA
jnCxAQCk8L6PPm0L2KvKr5Vu3M/T0o9SvfxfM5yho80zM68fHQD/eLxz+nd3m+N5
K7Mdbcb2u6F46qQaS+S5RialEWKpsw8=
=WtBo
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen fixes, almost all for MM.
Seven of these are cc:stable and the remainder fix up the changes
which went into this -rc cycle"
* tag 'mm-hotfixes-stable-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kprobes: don't call disarm_kprobe() for disabled kprobes
mm/shmem: shmem_replace_page() remember NR_SHMEM
mm/shmem: tmpfs fallocate use file_modified()
mm/shmem: fix chattr fsflags support in tmpfs
mm/hugetlb: support write-faults in shared mappings
mm/hugetlb: fix hugetlb not supporting softdirty tracking
mm/uffd: reset write protection when unregister with wp-mode
mm/smaps: don't access young/dirty bit if pte unpresent
mm: add DEVICE_ZONE to FOR_ALL_ZONES
kernel/sys_ni: add compat entry for fadvise64_64
mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW
Revert "zram: remove double compression logic"
get_maintainer: add Alan to .get_maintainer.ignore
This KUnit fixes update for Linux 6.0-rc3 consists of fixes to mmc
test and fix to load .kunit_test_suites section when CONFIG_KUNIT=m,
and not just when KUnit is built-in.
-----BEGIN PGP SIGNATURE-----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=HQ19
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fix for a mmc test and to load .kunit_test_suites section when
CONFIG_KUNIT=m, and not just when KUnit is built-in"
* tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=m
mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=m
Root cause:
The rebind_subsystems() is no lock held when move css object from A
list to B list,then let B's head be treated as css node at
list_for_each_entry_rcu().
Solution:
Add grace period before invalidating the removed rstat_css_node.
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Tested-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Link: https://lore.kernel.org/linux-arm-kernel/d8f0bc5e2fb6ed259f9334c83279b4c011283c41.camel@mediatek.com/T/
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Fixes: a7df69b81a ("cgroup: rstat: support cgroup1")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Tejun Heo <tj@kernel.org>
There is no need to keep the max CPU capacity in the per_cpu instance.
Furthermore, there is no need to check and update that variable
(sg_cpu->max) every time in the frequency change request, which is part
of hot path. Instead use struct sugov_policy to store that information.
Initialize the max CPU capacity during the setup and start callback.
We can do that since all CPUs in the same frequency domain have the same
max capacity (capacity setup and thermal pressure are based on that).
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
post_init_entity_util_avg() init task util_avg according to the cpu util_avg
at the time of fork, which will decay when switched_to_fair() some time later,
we'd better to not set them at all in the case of !fair task.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-10-zhouchengming@bytedance.com
When wake_up_new_task(), we use post_init_entity_util_avg() to init
util_avg/runnable_avg based on cpu's util_avg at that time, and
attach task sched_avg to cfs_rq.
Since enqueue_task_fair() -> enqueue_entity() -> update_load_avg()
loop will do attach, we can move this work to update_load_avg().
wake_up_new_task(p)
post_init_entity_util_avg(p)
attach_entity_cfs_rq() --> (1)
activate_task(rq, p)
enqueue_task() := enqueue_task_fair()
enqueue_entity() loop
update_load_avg(cfs_rq, se, UPDATE_TG | DO_ATTACH)
if (!se->avg.last_update_time && (flags & DO_ATTACH))
attach_entity_load_avg() --> (2)
This patch move attach from (1) to (2), update related comments too.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-9-zhouchengming@bytedance.com
commit 7dc603c902 ("sched/fair: Fix PELT integrity for new tasks")
introduce a TASK_NEW state and an unnessary limitation that would fail
when changing cgroup of new forked task.
Because at that time, we can't handle task_change_group_fair() for new
forked fair task which hasn't been woken up by wake_up_new_task(),
which will cause detach on an unattached task sched_avg problem.
This patch delete this unnessary limitation by adding check before do
detach or attach in task_change_group_fair().
So cpu_cgrp_subsys.can_attach() has nothing to do for fair tasks,
only define it in #ifdef CONFIG_RT_GROUP_SCHED.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-8-zhouchengming@bytedance.com
commit 7dc603c902 ("sched/fair: Fix PELT integrity for new tasks")
fixed two load tracking problems for new task, including detach on
unattached new task problem.
There still left another detach on unattached task problem for the task
which has been woken up by try_to_wake_up() and waiting for actually
being woken up by sched_ttwu_pending().
try_to_wake_up(p)
cpu = select_task_rq(p)
if (task_cpu(p) != cpu)
set_task_cpu(p, cpu)
migrate_task_rq_fair()
remove_entity_load_avg() --> unattached
se->avg.last_update_time = 0;
__set_task_cpu()
ttwu_queue(p, cpu)
ttwu_queue_wakelist()
__ttwu_queue_wakelist()
task_change_group_fair()
detach_task_cfs_rq()
detach_entity_cfs_rq()
detach_entity_load_avg() --> detach on unattached task
set_task_rq()
attach_task_cfs_rq()
attach_entity_cfs_rq()
attach_entity_load_avg()
The reason of this problem is similar, we should check in detach_entity_cfs_rq()
that se->avg.last_update_time != 0, before do detach_entity_load_avg().
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-7-zhouchengming@bytedance.com
When we are migrating task out of the CPU, we can combine detach and
propagation into dequeue_entity() to save the detach_entity_cfs_rq()
in migrate_task_rq_fair().
This optimization is like combining DO_ATTACH in the enqueue_entity()
when migrating task to the CPU. So we don't have to traverse the CFS tree
extra time to do the detach_entity_cfs_rq() -> propagate_entity_cfs_rq(),
which wouldn't be called anymore with this patch's change.
detach_task()
deactivate_task()
dequeue_task_fair()
for_each_sched_entity(se)
dequeue_entity()
update_load_avg() /* (1) */
detach_entity_load_avg()
set_task_cpu()
migrate_task_rq_fair()
detach_entity_cfs_rq() /* (2) */
update_load_avg();
detach_entity_load_avg();
propagate_entity_cfs_rq();
for_each_sched_entity()
update_load_avg()
This patch save the detach_entity_cfs_rq() called in (2) by doing
the detach_entity_load_avg() for a CPU migrating task inside (1)
(the task being the first se in the loop)
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-6-zhouchengming@bytedance.com
When reading the sched_avg related code, I found the comments in
enqueue/dequeue_entity() are not updated with the current code.
We don't add/subtract entity's runnable_avg from cfs_rq->runnable_avg
during enqueue/dequeue_entity(), those are done only for attach/detach.
This patch updates the comments to reflect the current code working.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-5-zhouchengming@bytedance.com
set_task_rq() -> set_task_rq_fair() will try to synchronize the blocked
task's sched_avg when migrate, which is not needed for already detached
task.
task_change_group_fair() will detached the task sched_avg from prev cfs_rq
first, so reset sched_avg last_update_time before set_task_rq() to avoid that.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-4-zhouchengming@bytedance.com
We use cpu_cgrp_subsys->fork() to set task group for the new fair task
in cgroup_post_fork().
Since commit b1e8206582 ("sched: Fix yet more sched_fork() races")
has already set_task_rq() for the new fair task in sched_cgroup_fork(),
so cpu_cgrp_subsys->fork() can be removed.
cgroup_can_fork() --> pin parent's sched_task_group
sched_cgroup_fork()
__set_task_cpu()
set_task_rq()
cgroup_post_fork()
ss->fork() := cpu_cgroup_fork()
sched_change_group(..., TASK_SET_GROUP)
task_set_group_fair()
set_task_rq() --> can be removed
After this patch's change, task_change_group_fair() only need to
care about task cgroup migration, make the code much simplier.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220818124805.601-3-zhouchengming@bytedance.com
Previously we only maintain task se depth in task_move_group_fair(),
if a !fair task change task group, its se depth will not be updated,
so commit eb7a59b2c8 ("sched/fair: Reset se-depth when task switched to FAIR")
fix the problem by updating se depth in switched_to_fair() too.
Then commit daa59407b5 ("sched/fair: Unify switched_{from,to}_fair()
and task_move_group_fair()") unified these two functions, moved se.depth
setting to attach_task_cfs_rq(), which further into attach_entity_cfs_rq()
with commit df217913e7 ("sched/fair: Factorize attach/detach entity").
This patch move task se depth maintenance from attach_entity_cfs_rq()
to set_task_rq(), which will be called when CPU/cgroup change, so its
depth will always be correct.
This patch is preparation for the next patch.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20220818124805.601-2-zhouchengming@bytedance.com
Audit_alloc_mark() assign pathname to audit_mark->path, on error path
from fsnotify_add_inode_mark(), fsnotify_put_mark will free memory
of audit_mark->path, but the caller of audit_alloc_mark will free
the pathname again, so there will be double free problem.
Fix this by resetting audit_mark->path to NULL pointer on error path
from fsnotify_add_inode_mark().
Cc: stable@vger.kernel.org
Fixes: 7b12932340 ("fsnotify: Add group pointer in fsnotify_init_mark()")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The change that made IPMODIFY and DIRECT ops work together needed access
to the ops_references_ip() function, which it pulled out of the module
only code. But now if both CONFIG_MODULES and
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not set, we get the below
warning:
‘ops_references_rec’ defined but not used.
Since ops_references_rec() only calls ops_references_ip() replace the
usage of ops_references_rec() with ops_references_ip() and encompass the
function with an #ifdef of DIRECT_CALLS || MODULES being defined.
Link: https://lkml.kernel.org/r/20220801084745.1187987-1-wangjingjin1@huawei.com
Fixes: 53cd885bc5 ("ftrace: Allow IPMODIFY and DIRECT ops on the same function")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and histograms
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwKRrhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosDAP9WySmPxjoMfR0hbjmnepLy2zJtBbIq
ABWR3LDrjvLlYwD9H/wrD+6ctOZtXh5XJc0Vn5z6XEyNtqrVGSse7Lm+sg4=
=qb/R
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes for tracing:
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and
histograms"
* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter accept "common_cpu" to be consistent
tracing/probes: Have kprobes and uprobes use $COMM too
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
tracing/eprobes: Fix reading of string fields
tracing/eprobes: Do not hardcode $comm as a string
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
tracing/perf: Fix double put of trace event when init fails
tracing: React to error return from traceprobe_parse_event_name()
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.
Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.
Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.
Now when a string field is used, the ":string" type can be used to display
it:
echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events
Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Namhyung Kim