Commit Graph

59 Commits

Author SHA1 Message Date
Thierry Reding 986c58d162 drm/tegra: Implement subsystem-level suspend/resume
Use the drm_atomic_helper_suspend() and drm_atomic_helper_resume()
helpers to implement subsystem-level suspend/resume.

v2: suspend framebuffer device to avoid concurrency issues
v3: resume fbdev on failure to suspend (Emil Velikov)

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14 10:50:39 +01:00
Thierry Reding 9542c2376e drm/tegra: sor: Operate on struct drm_dp_aux *
Instead of getting a pointer to the driver-specific wrapper of AUX
channels, use the AUX channel objects directly to avoid hackish casting
between the two types.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14 10:50:37 +01:00
Thierry Reding 473112e443 drm/tegra: Use new multi-driver module helpers
Use the new multi-driver module helpers to get rid of some boilerplate
in the module initialization and cleanup functions.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-12-14 10:50:34 +01:00
Ville Syrjälä 1eb83451ba drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()
Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-24 11:47:38 +01:00
Archit Taneja b110ef3775 drm/tegra: Remove local fbdev emulation Kconfig option
DRM_TEGRA_FBDEV config is currently used to enable/disable legacy fbdev
emulation for the tegra kms driver.

Remove this local config option and use the top level DRM_FBDEV_EMULATION
config option instead.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1445933459-5249-4-git-send-email-architt@codeaurora.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-24 11:41:50 +01:00
Thierry Reding 791ddb1e1c drm/tegra: dc: Record statistics
Record interrupt statistics, such as the number of frames and VBLANKs
received and the number of FIFO underflow and overflows.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13 13:47:43 +02:00
Thierry Reding fb36d0eed4 drm/tegra: output: Support low-active hotplug detect
Support low-active hotplug detect signals by storing the GPIO flags
parsed from device tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-08-13 13:47:40 +02:00
Thierry Reding 3774363c75 drm/tegra: dc: Remove unused function
The tegra_dc_setup_clock() function is unused after the conversion to
atomic mode-setting, so remove it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-02 18:49:21 +02:00
Thierry Reding 42e9ce0523 drm/tegra: dc: Implement hardware VBLANK counter
The display controller on Tegra can use syncpoints to count VBLANK
events. syncpoints are 32-bit unsigned integers, so well suited as
VBLANK counters.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-02 18:46:21 +02:00
Thierry Reding 8f604f8c4d drm/tegra: Track tiling and format in plane state
Tracking these in the plane state allows them to be computed in the
->atomic_check() callback and reused when applying the configuration in
->atomic_update().

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:57 +01:00
Thierry Reding 1503ca47d7 drm/tegra: Atomic conversion, phase 3, step 3
Provide a custom ->atomic_commit() implementation which supports async
commits. The generic atomic page-flip helper can use this to implement
page-flipping.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:55 +01:00
Thierry Reding ca915b108a drm/tegra: dc: Store clock setup in atomic state
This allows the clock setup to be separated from the clock programming
and better matches the expectations of the atomic modesetting where no
code paths must fail during modeset.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:52 +01:00
Thierry Reding 328ec69e7f drm/tegra: Output cleanup functions cannot fail
The tegra_output_exit() and tegra_output_remove() functions cannot fail,
so make them return void.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:49 +01:00
Thierry Reding ea130b240d drm/tegra: Remove remnants of the output midlayer
The tegra_output midlayer is now completely gone and output drivers use
it purely as a helper library.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:49 +01:00
Thierry Reding 6fad8f66d7 drm/tegra: sor: Demidlayer
Implement encoder and connector within the eDP driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:48 +01:00
Thierry Reding 5b901e78b2 drm/tegra: dsi: Demidlayer
Implement encoder and connector within the DSI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:48 +01:00
Thierry Reding 596827196f drm/tegra: hdmi: Demidlayer
Implement encoder and connector within the HDMI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:47 +01:00
Thierry Reding 3b0e585548 drm/tegra: rgb: Demidlayer
Implement encoder and connector within the RGB driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:47 +01:00
Thierry Reding c5a107d327 drm/tegra: Add tegra_dc_setup_clock() helper
This is a small helper that performs the basic steps required by all
output drivers to prepare the display controller for use with a given
encoder.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:46 +01:00
Thierry Reding d5bae6f33e drm/tegra: output: Make ->setup_clock() optional
In order to transition output drivers to using the struct tegra_output
as a helper rather than midlayer, make this callback optional. Instead
drivers should implement the equivalent as part of ->mode_fixup(). For
the conversion to atomic modesetting a new callback ->atomic_check()
should be implemented that updates the display controller's state with
the corresponding parent clock, rate and shift clock divider.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:46 +01:00
Thierry Reding 132085d84f drm/tegra: Convert output midlayer to helpers
The output layer was initially designed to help reduce the amount of
code duplicated in output drivers. An unfortunate side-effect of that
was that it turned into a midlayer and it became difficult to make the
output drivers work without bending over backwards to fit into the
midlayer.

This commit starts to convert the midlayer into a helper library by
exporting most of the common functions so that they can be used by the
output drivers directly. Doing so will allow output drivers to reuse
common code paths but more easily override them where necessary.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:45 +01:00
Thierry Reding f991421490 drm/tegra: Move tegra_drm_mode_funcs to the core
This structure will be extended using non-framebuffer related callbacks
in subsequent patches, so it should move to a more central location.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:44 +01:00
Thierry Reding 62b9e06321 drm/tegra: Use tegra_commit_dc() in output drivers
All output drivers have open-coded variants of this function, so export
it to remove some code duplication.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27 10:14:43 +01:00
Thierry Reding 03a6056976 drm/tegra: dc: Registers are 32 bits wide
Using an unsigned long type will cause these variables to become 64-bit
on 64-bit SoCs. In practice this should always work, but there's no need
for carrying around the additional 32 bits.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:17:03 +01:00
Thierry Reding df06b759f2 drm/tegra: Add IOMMU support
When an IOMMU device is available on the platform bus, allocate an IOMMU
domain and attach the display controllers to it. The display controllers
can then scan out non-contiguous buffers by mapping them through the
IOMMU.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:48 +01:00
Thierry Reding 1d1e6fe9b5 drm/tegra: Fix error handling cleanup
The DRM driver's ->load() implementation didn't do a good job (no job at
all really) cleaning up on failure. Fix that by undoing any prior setup
when an error occurs. This requires a bit of rework to make it possible
to clean up fbdev midway.

This was tested by injecting errors at various points during the
initialization sequence and verifying that error cleanup didn't crash
and no memory leaked (using kmemleak).

Reported-by: Stéphane Marchesin <marcheu@chromium.org>
Reported-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:48 +01:00
Thierry Reding 9c0127004f drm/tegra: dc: Add powergate support
Both display controllers are in their own power partition. Currently the
driver relies on the assumption that these partitions are on (which is
the hardware default). However some bootloaders may disable them, so the
driver must make sure to turn them back on to avoid hangs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:59 +01:00
Thierry Reding d1f3e1e0b3 drm/tegra: Properly align stride for framebuffers
Tegra20 and Tegra30 both required the buffer line stride to be aligned
on 8 byte boundaries. Tegra114 and Tegra124 increased the alignment to
64 bytes. Introduce a parameter to specify the alignment requirements
for each display controller and round up the pitch of newly allocated
framebuffers appropriately.

Originally-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-04 10:07:38 +02:00
Thierry Reding c134f019ab drm/tegra: Implement more tiling modes
Tegra124 supports a block-linear mode in addition to the regular pitch
linear and tiled modes. Add support for these by moving the internal
representation into a structure rather than a simple flag.

Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-04 10:07:34 +02:00
Thierry Reding e2215321ff drm/tegra: Implement race-free hotplug detection
A race condition currently exists on Tegra, where it can happen that a
monitor attached via HDMI isn't detected during the initial FB helper
setup, but the hotplug event happens too early to be processed by the
poll helpers because they haven't been initialized yet. This happens
because on some boards the HDMI driver can control the regulator that
supplies the +5V pin on the HDMI connector. Therefore depending on the
timing between the initialization of the HDMI driver and the rest of
DRM, it's possible that the monitor returns the hotplug signal right
within the window where we would miss it.

Unfortunately, drm_kms_helper_poll_init() will wreak havoc when called
before at least some parts of the FB helpers have been set up.

This commit fixes this by splitting out the minimum of initialization
required to make drm_kms_helper_poll_init() work into a separate
function that can be called early. It is then safe to move all of the
poll helper initialization to an earlier point in time (before the
HDMI output driver has a chance to enable the +5V supply). That way if
the hotplug signal is returned before the initial FB helper setup, the
monitor will be forcefully detected at that point, and if the hotplug
signal is returned after that it will be properly handled by the poll
helpers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08 11:31:36 +10:00
Thierry Reding 9910f5c455 drm/tegra: Remove host1x drm_bus implementation
The DRM core can now cope with drivers that don't have an associated
struct drm_bus, so the host1x implementation is no longer useful.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:14:46 +02:00
Thierry Reding 91eded9b48 drm/tegra: dc - Compute shift clock divider in output drivers
The shift clock divider is highly dependent on the type of output, so
push computation of it down into the output drivers. The old code used
to work merely by accident.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:33 +02:00
Thierry Reding 10288eea88 drm/tegra: dc - Reshuffle code to get rid of prototypes
The tegra_dc_format() and tegra_dc_setup_window() functions are only
used internally by the display controller driver. Move them upwards in
order to make them static and get rid of the function prototypes.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:18 +02:00
Thierry Reding f925390efc drm/tegra: dc - Add YUYV support
YUYV is UYVY with swapped bytes. Luckily the Tegra DC hardware can swap
bytes during scan-out, so supporting YUYV is simply a matter of writing
the correct value to the byteswap register.

This patch modifies tegra_dc_format() to return the byte swap parameter
via an output parameter in addition to returning the pixel format. Many
other formats can potentially be supported in a similar way.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:16 +02:00
Thierry Reding 688c59afbf drm/tegra: Cleanup header file
Remove extern keyword from function prototypes since it isn't needed and
drop an unnecessary forward declaration.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-05 23:09:15 +02:00
Thierry Reding 6b6b604215 drm/tegra: Add eDP support
Add support for eDP functionality found on Tegra124 and later SoCs. Only
fast link training is currently supported.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04 09:12:50 +02:00
Thierry Reding 8620fc629a drm/tegra: Add Tegra124 DC support
Tegra124 and later support interlacing, but the driver doesn't support
it yet. Make sure interlacing stays disabled on hardware that supports
it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:06 +01:00
Thierry Reding 60c2f709d9 drm/tegra: Make legacy fbdev support optional
A lot of the modern userspace is capable of working without the legacy
fbdev support. kmscon can be used as a replacement for the framebuffer
console, and KMS X drivers create their own framebuffers.

Most people don't have a system where all of this works yet, though, so
leave support enabled by default.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:05 +01:00
Thierry Reding dec727399a drm/tegra: Add DSI support
This commit adds support for both DSI outputs found on Tegra. Only very
minimal functionality is implemented, so advanced features like ganged
mode won't work.

Due to the lack of other test hardware, some sections of the driver are
hardcoded to work with Dalmore.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-20 15:56:04 +01:00
Thierry Reding 9be7d864cf drm/tegra: Implement panel support
Use the DRM panel framework to attach a panel to an output. If the panel
attached to a connector supports supports the backlight brightness
accessors, a property will be available to allow the brightness to be
modified from userspace.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-17 18:10:00 +01:00
Thierry Reding b03bb79d4f ARM: tegra: implement common DMA and resets DT bindings
This series converts the Tegra DTs and drivers to use the common/
 standard DMA and reset bindings, rather than custom bindings. It also
 adds complete documentation for the Tegra clock bindings without
 actually changing any binding definitions.
 
 This conversion relies on a few sets of patches in branches from outside
 the Tegra tree:
 
 1) A patch to add an DMA channel request API which allows deferred probe
    to be implemented.
 
 2) A patch to implement a common part of the of_xlate function for DMA
    controllers.
 
 3) Some ASoC patches (which in turn rely on (1) above), which support
    deferred probe during DMA channel allocation.
 
 4) The Tegra clock driver changes for 3.14.
 
 Consequently, this branch is based on a merge of all of those external
 branches.
 
 In turn, this branch is or will be pulled into a few places that either
 rely on features introduced here, or would otherwise conflict with the
 patches:
 
 a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
    conflicts.
 
 b) The DRM tree, which introduces new code that relies on the reset
    controller framework introduced in this branch, and to avoid
    conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSr3AnAAoJEMzrak5tbycxfMwQAMeffTFreJqDiQ4Vj0XmuhSn
 RFlXiZQsWtQ6gGgNfKyDsXzDMaz1KDAabcUYRcZwrluxuSCPBcK1JirCj5R8uRY7
 LDZFX92CO8zRgiij0mhgokV4zzuEQ56q1uhPxqI3o+wG3v44jlMSMgFHQJUevdET
 aKr2Pss8Hb00XDztnpxprs6FUoU/W99NRH0i/5znbBwuHqYFP37zlKe2MRwbqDwR
 AMgkrnGoawe85Stz4p/iR9pCLpAMa0dH94V4JrAP4+IQrl0DEKWbrolpQHii4gzh
 NCGazMELTqkaZaorC/n1SmczH1kTj4vcjbbmeB8dwS8Vqhr+uf7W1oLlJ46TUOsp
 ESO0uD2GfpHKQQwLxEfgjfmwsIUMbdWHef8f2HUuvl6Js+LCpaPkxd52Pt/qL4sU
 0sKqTbldRZXzGhvwa0/MK32WhmH4v31s7IZAg5A2YxqDR6yWryl7legWyvrI96C0
 OlmVe1C/2NGk0QCfK0G/xTa9V7YzMfj8k4ICSZOgUoF4BeGGj6d3svWvLbKbbrU1
 0fVvR7aCm78pRXixI6kURpj9D0mEfqus9Hx7VoWcL0TS4QH2dSYlGI+jDCiliQmj
 +kWrZWHsASSvPmUZk4RBNaviCbnGU8/t5nNdJSdFIUM/PIswzZ4GaAu6gdVksIY8
 hcx410PyAzTZL2lENamE
 =8T7+
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.14-dmas-resets-rework' into drm/for-next

ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.
2013-12-17 18:09:16 +01:00
Stephen Warren ca48080a03 drm/tegra: use reset framework
Tegra's clock driver now provides an implementation of the common
reset API (include/linux/reset.h). Use this instead of the old Tegra-
specific API; that will soon be removed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Terje Bergstrom <tbergstrom@nvidia.com>
2013-12-11 16:43:04 -07:00
Thierry Reding 37826519c4 drm/tegra: Make CRTC upcasting safer
When upcasting a NULL CRTC object, propagate the NULL pointer instead of
some invalid pointer. This allows subsequent code to check that the cast
object is valid.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-03 10:04:15 +01:00
Thierry Reding db7fbdfd25 drm/tegra: Support bottom-up buffer objects
The gr3d engine renders images bottom-up. Allow buffers that are used
for 3D content to be marked as such and implement support in the display
controller to present them properly.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:46 +01:00
Thierry Reding 773af77fc4 drm/tegra: Add support for tiled buffer objects
The gr2d and gr3d engines work more efficiently on buffers with a tiled
memory layout. Allow created buffers to be marked as tiled so that the
display controller can scan them out properly.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:46 +01:00
Thierry Reding 5f60ed0d84 drm/tegra: Add 3D support
Initialize and power the 3D unit on Tegra20, Tegra30 and Tegra114 and
register a channel with the Tegra DRM driver so that the unit can be
used from userspace.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:45 +01:00
Thierry Reding c40f0f1afc drm/tegra: Introduce tegra_drm_submit()
Command stream submissions are the same across all devices that expose
a channel to userspace, so move the code into a generic function.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:45 +01:00
Thierry Reding 59d29c0ec9 drm/tegra: Allocate resources at probe time
Since the .init() and .exit() functions are executed whenever the DRM
driver is loaded or unloaded, care must be taken not to use them for
resource allocation. Otherwise deferred probing cannot be used, since
the .init() and .exit() are not run at probe time. Similarly the code
that frees resources must be run at .remove() time. If it is run from
the .exit() function, it can release resources multiple times.

To handle this more consistently, rename the tegra_output_parse_dt()
function to tegra_output_probe() and introduce tegra_output_remove()
which can be used to free output-related resources.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:41 +01:00
Thierry Reding dee8268f8f drm/tegra: Move driver to DRM tree
In order to make subsystem-wide changes easier, move the Tegra DRM
driver back into the DRM tree.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:55:40 +01:00
Terje Bergstrom 4231c6b01a drm/tegra: Move drm to live under host1x
Make drm part of host1x driver.

Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-04-22 12:39:11 +02:00