Update state upon any interrupt to report correct state transitions in
case the flexcan core enabled the broken error state quirk fix.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
interrupt handling was broken with conversion to using regmap caching.
cached_gpio value was updated by boolean status instead of gpio reading.
Fixes: 8f38910ba4 ("pinctrl: mcp23s08: switch to regmap caching")
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On Asus laptop models X505BA, X505BP, X542BA and X542BP, the i2c-hid
touchpad (using a GPIO for interrupts) becomes unresponsive after a
few minutes of usage, or after placing two fingers on the touchpad,
which seems to have the effect of queuing up a large amount of input
data to be transferred.
When the touchpad is in unresponsive state, we observed that the GPIO
level-triggered interrupt is still at it's active level, however the
pinctrl-amd driver is not receiving/dispatching more interrupts at this
point.
After the initial interrupt arrives, amd_gpio_irq_mask() is called
however we then see amd_gpio_irq_handler() being called repeatedly for
the same irq; the interrupt mask is not taking effect because of the
following sequence of events:
- amd_gpio_irq_handler fires, reads and caches pin reg
- amd_gpio_irq_handler calls generic_handle_irq()
- During IRQ handling, amd_gpio_irq_mask() is called and modifies pin reg
- amd_gpio_irq_handler clears interrupt by writing cached value
The stale cached value written at the final stage undoes the masking.
Fix this by re-reading the register before clearing the interrupt.
I also spotted that the interrupt-clearing code can race against
amd_gpio_irq_mask() / amd_gpio_irq_unmask(), so add locking there.
Presumably this race was leading to the loss of interrupts.
After these changes, the touchpad appears to be working fine.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Shah, Nehal-bakulchandra <Nehal-Bakulchandra.shah@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the connect status change is set during reset signaling, but
the status remains connected just retry port reset.
This solves an issue with connecting a 90W HP Thunderbolt 3 dock
with a Lenovo Carbon x1 (5th generation) which causes a 30min loop
of a high speed device being re-discovererd before usb ports starts
working.
[...]
[ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd
[ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd
[ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd
[...]
This is caused by a high speed device that doesn't successfully go to the
enabled state after the second port reset. Instead the connection bounces
(connected, with connect status change), bailing out completely from
enumeration just to restart from scratch.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a new metro-usb device id for another bar-code scanner.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEHszNKQClByu0A+9RQQ3kT97htJUFAlnoTmoRHGpvaGFuQGtl
cm5lbC5vcmcACgkQQQ3kT97htJWw7A/8CcZIokgucSDAvBKbmFKIB7kWDoFnLMjQ
/pVQOgR+Pkw7sDAHlc/N4KSsSQhP6VdQ+lar8NwK9GyI0lQ2Xl3kD7beEiznTV7Q
fCgIW5w059W6W0hezVuRMPmJyQr6T/8HhIJXTC1y4xUw4IEX5m13LEoVWJasOnLP
oCUsaod6RhOsNQWWcC6vfmbTji/DikmZSUwHYj0YXsaLyz9fakV7WvRJVIz4MZsi
4Ea8a4PVnc5ki7UxxIIoGPwao/zX1fcuYCZgWeLmgPQ5oU7JOlMY4A9LZd7ETqNP
JJEcG1vuW3FupUYMQqbykd5a5div1VyfGW4vBDzpF71ipA8pPt8bgxeJVSQ/KSAA
/qAT2SkAtzJc1LMVnNOl5YTNSd9H1UdJknL93CaS6QIE8h5ew1k9uJyLDlRBszLZ
lTdoD9ngojNQ4V4xZxoT5hpHslZxXrvwLM1vJjLE7vR7qXaxYJ9sAnpKQQURnYzJ
d55Ie6Lj8dalNjTCPPiGX6SbtXV+yMJMyQtwdsnmTeJe7W9Y1wQ3XFBeevNy8I84
fqXmuEgHjpfT/xMnFWVNYzVGY2YM/w/1Uu7PYOKpx8C7DQGNiEo43bqIoLSVts62
3qZDwHbt9Ie2ERrVth9d47awd2I+aiLxz2ClYbRkhqlOdN4NfFo38Nzs7Og5reya
ykBF074OfT4=
=g3Ln
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.14-rc6
Here's a new metro-usb device id for another bar-code scanner.
Signed-off-by: Johan Hovold <johan@kernel.org>
For CPUs which have an unknown or invalid CPU location (physical location)
assume that their cycle counters aren't syncronized across CPUs.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c8c3735997 ("parisc: Enhance detection of synchronous cr16 clocksources")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Helge Deller <deller@gmx.de>
__cmpxchg_u64 is built and used outside CONFIG_64BIT and thus needs to
be exported. This fixes the following build error seen when building
parisc:allmodconfig.
ERROR: "__cmpxchg_u64" [drivers/net/ethernet/intel/i40e/i40e.ko] undefined!
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
As discussed on the debian-hppa list, double-wordcompare and exchange
operations fail on 32-bit kernels. Looking at the code, I realized that
the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29"
instruction. This increments %r26 and causes the following store to
write to the wrong location.
Note by Helge Deller:
The patch applies cleanly to stable kernel series if this upstream
commit is merged in advance:
f4125cfdb3 ("parisc: Avoid trashing sr2 and sr3 in LWS code").
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Fixes: 8920649120 ("parisc: Implement new LWS CAS supporting 64 bit operations.")
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Helge Deller <deller@gmx.de>
Fix for stable:
- Fix DDI translation tables for BDW (Chris).
Critical fix:
- Fix GPU Hang on GVT (Changbin).
Other fixes:
- Fix eviction when GGTT is idle (Chris).
- CNL PLL fixes (Rodrigo).
- Fix pwrite into shmemfs (Chris).
- Mask bits for BXT and CHV L3 Workaround
WaProgramL3SqcReg1Default (Oscar).
* tag 'drm-intel-fixes-2017-10-18-1' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Use a mask when applying WaProgramL3SqcReg1Default
drm/i915: Report -EFAULT before pwrite fast path into shmemfs
drm/i915/cnl: Fix PLL initialization for HDMI.
drm/i915/cnl: Fix PLL mapping.
drm/i915: Use bdw_ddi_translations_fdi for Broadwell
drm/i915: Fix eviction when the GGTT is idle but full
drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS
The pointer fs_ns is assigned from inode->i_ib->s_user_ns before
a null pointer check on inode, hence if inode is actually null we
will get a null pointer dereference on this assignment. Fix this
by only dereferencing inode after the null pointer check on
inode.
Detected by CoverityScan CID#1455328 ("Dereference before null check")
Fixes: 8db6c34f1d ("Introduce v3 namespaced file capabilities")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
The commit 78bcac7b2a ("Input: add support for the STMicroelectronics
FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper
function in order to get the value of common properties.
But, commit 78bcac7b2a didn't set the capability of ABS_MT_POSITION_*
before calling touchscreen_parse_properties(). In result, the max_x and
max_y of 'struct touchscreen_properties' were not set.
Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Step config setting for 5 wire touchscreen is incorrect for Y coordinates.
It was broken while we moved to DT. If you look close at the offending
commit bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made
configurable"), the change was:
- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ ts_dev->bit_xn | ts_dev->bit_yp;
while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the
same.
Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Signed-off-by: Jeff Lance <j-lance1@ti.com>
[vigneshr@ti.com: Rebase to v4.14-rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Single amdgpu regression fix.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/amdgpu: discard commands of killed processes"
[AV: in addition to the fix in previous commit]
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
some nouveau fixes.
* 'linux-4.14' of git://github.com/skeggsb/linux:
drm/nouveau/fbcon: fix oops without fbdev emulation
drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards
drm/nouveau/bsp/g92: disable by default
drm/nouveau/mmu: flush tlbs before deleting page tables
This is similar to an earlier commit 52dfcc5ccf ("drm/nouveau: fix for
disabled fbdev emulation"), but protects all occurrences of helper.fbdev
in the source.
I see oops in nouveau_fbcon_accel_save_disable() called from
nouveau_fbcon_set_suspend_work() on Linux 3.13 when
CONFIG_DRM_FBDEV_EMULATION option is disabled.
Signed-off-by: Pavel Roskin <plroskin@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- fix some more CONFIG_XFS_RT related build problems
- fix data loss when writeback at eof races eofblocks gc and loses
- invalidate page cache after fs finishes a dio write
- remove dirty page state when invalidating pages so releasepage does
the right thing when handed a dirty page
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UY00
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- fix some more CONFIG_XFS_RT related build problems
- fix data loss when writeback at eof races eofblocks gc and loses
- invalidate page cache after fs finishes a dio write
- remove dirty page state when invalidating pages so releasepage does
the right thing when handed a dirty page
* tag 'xfs-4.14-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: move two more RT specific functions into CONFIG_XFS_RT
xfs: trim writepage mapping to within eof
fs: invalidate page cache after end_io() in dio completion
xfs: cancel dirty pages on invalidation
Pull block fixes from Jens Axboe:
"Three small fixes:
- A fix for skd, it was using kfree() to free a structure allocate
with kmem_cache_alloc().
- Stable fix for nbd, fixing a regression using the normal ioctl
based tools.
- Fix for a previous fix in this series, that fixed up
inconsistencies between buffered and direct IO"
* 'for-linus' of git://git.kernel.dk/linux-block:
fs: Avoid invalidation in interrupt context in dio_complete()
nbd: don't set the device size until we're connected
skd: Use kmem_cache_free
Andrey used the syzkaller fuzzer to find an out-of-bounds memory
access in usb_get_bos_descriptor(). The code wasn't checking that the
next usb_dev_cap_header structure could fit into the remaining buffer
space.
This patch fixes the error and also reduces the bNumDeviceCaps field
in the header to match the actual number of capabilities found, in
cases where there are fewer than expected.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important
(although we probably aren't at the moment because 0 seems to be the default
for all the other bits).
v2: Extra parentheses (Michel)
Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf")
Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508271945-14961-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 930a784d02)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When pwriting into shmemfs, the fast path pagecache_write does not
notice when it is writing to beyond the end of the truncated shmemfs
inode. Report -EFAULT directly when we try to use pwrite into the
!I915_MADV_WILLNEED object.
Fixes: 7c55e2c577 ("drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl")
Testcase: igt/gem_madvise/dontneed-before-pwrite
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016202732.25459-1-chris@chris-wilson.co.uk
(cherry picked from commit a6d65e451c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Borislav thinks that we don't need this knob in a released kernel.
Get rid of it.
Requested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
Link: http://lkml.kernel.org/r/1fa72431924e81e86c164ff7881bf9240d1f1a6c.1508000261.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Due to timezones, commit:
b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
was an outdated patch that well tested and fixed the bug but didn't
address Borislav's review comments.
Tidy it up:
- The name "tlb_use_lazy_mode()" was highly confusing. Change it to
"tlb_defer_switch_to_init_mm()", which describes what it actually
means.
- Move the static_branch crap into a helper.
- Improve comments.
Actually removing the debugfs option is in the next patch.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode")
Link: http://lkml.kernel.org/r/154ef95428d4592596b6e98b0af1d2747d6cfbf8.1508000261.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit:
e863d53961 ("kprobes: Warn if optprobe handler tries to change execution path")
On PowerPC, we place a probe at kretprobe_trampoline to catch function
returns and with CONFIG_OPTPROBES=y, this probe gets optimized. This
works for us due to the way we handle the optprobe as described in
commit:
762df10bad ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()")
With the above commit, we end up with a warning. As such, revert this change.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171017081834.3629-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Blacklist Broadwell X model 79 for late loading due to an erratum.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The previous commit (0adbfd46) fixed a memory leak but also freed a
block in the success case, causing a stale pointer to be used with
potentially fatal results. Only free the vchi_instance block in the
case that vchi_connect fails; once connected, the instance is
retained for subsequent connections.
Simplifying the code by removing a bunch of gotos and returning errors
directly.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Fixes: 0adbfd4694 ("staging: bcm2835-audio: fix memory leak in bcm2835_audio_open_connection()")
Cc: stable <stable@vger.kernel.org> # 4.12+
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f1174f77b5 ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In current xyarray code, xyarray__max_x() returns max_y, and xyarray__max_y()
returns max_x.
It's confusing and for code logic it looks not correct.
Error happens when closing evsel fd. Let's see this scenario:
1. Allocate an fd (pseudo-code)
perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
{
evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int));
}
xyarray__new(int xlen, int ylen, size_t entry_size)
{
size_t row_size = ylen * entry_size;
struct xyarray *xy = zalloc(sizeof(*xy) + xlen * row_size);
xy->entry_size = entry_size;
xy->row_size = row_size;
xy->entries = xlen * ylen;
xy->max_x = xlen;
xy->max_y = ylen;
......
}
So max_x is ncpus, max_y is nthreads and row_size = nthreads * 4.
2. Use perf syscall and get the fd
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
struct thread_map *threads)
{
for (cpu = 0; cpu < cpus->nr; cpu++) {
for (thread = 0; thread < nthreads; thread++) {
int fd, group_fd;
fd = sys_perf_event_open(&evsel->attr, pid, cpus->map[cpu],
group_fd, flags);
FD(evsel, cpu, thread) = fd;
}
}
static inline void *xyarray__entry(struct xyarray *xy, int x, int y)
{
return &xy->contents[x * xy->row_size + y * xy->entry_size];
}
These codes don't have issues. The issue happens in the closing of fd.
3. Close fd.
void perf_evsel__close_fd(struct perf_evsel *evsel)
{
int cpu, thread;
for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++)
for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
}
Since xyarray__max_x() returns max_y (nthreads) and xyarry__max_y()
returns max_x (ncpus), so above code is actually to be:
for (cpu = 0; cpu < nthreads; cpu++)
for (thread = 0; thread < ncpus; ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
It's not correct!
This change is introduced by "475fb533fb7d" ("perf evsel: Fix buffer overflow
while freeing events")
This fix is to let xyarray__max_x() return max_x (ncpus) and
let xyarry__max_y() return max_y (nthreads)
Committer note:
This was also fixed by Ravi Bangoria, who provided the same patch,
noticing the problem with 'perf record':
<quote Ravi>
I see 'perf record -p <pid>' crashes with following log:
*** Error in `./perf': free(): invalid next size (normal): 0x000000000298b340 ***
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f7fd85c87e5]
/lib/x86_64-linux-gnu/libc.so.6(+0x8037a)[0x7f7fd85d137a]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f7fd85d553c]
./perf(perf_evsel__close+0xb4)[0x4b7614]
./perf(perf_evlist__delete+0x100)[0x4ab180]
./perf(cmd_record+0x1d9)[0x43a5a9]
./perf[0x49aa2f]
./perf(main+0x631)[0x427841]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f7fd8571830]
./perf(_start+0x29)[0x427a59]
</>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Fixes: d74be47673 ("perf xyarray: Save max_x, max_y")
Link: http://lkml.kernel.org/r/1508339478-26674-1-git-send-email-yao.jin@linux.intel.com
Link: http://lkml.kernel.org/r/1508327446-15302-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that it's possible to toggle NETLINK_F_EXT_ACK
through setsockopt() while another thread/CPU is building
a message inside netlink_ack(), which could then trigger
the WARN_ON()s I added since if it goes from being turned
off to being turned on between allocating and filling the
message, the skb could end up being too small.
Avoid this whole situation by storing the value of this
flag in a separate variable and using that throughout the
function instead.
Fixes: 2d4bc93368 ("netlink: extended ACK reporting")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch correctly sets the number of additional header descriptors
that will be sent in an indirect SCRQ entry.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an EMAD is transmitted, a timeout work item is scheduled with a
delay of 200ms, so that another EMAD will be retried until a maximum of
five retries.
In certain situations, it's possible for the function waiting on the
EMAD to be associated with a work item that is queued on the same
workqueue (`mlxsw_core`) as the timeout work item. This results in
flushing a work item on the same workqueue.
According to commit e159489baa ("workqueue: relax lockdep annotation
on flush_work()") the above may lead to a deadlock in case the workqueue
has only one worker active or if the system in under memory pressure and
the rescue worker is in use. The latter explains the very rare and
random nature of the lockdep splats we have been seeing:
[ 52.730240] ============================================
[ 52.736179] WARNING: possible recursive locking detected
[ 52.742119] 4.14.0-rc3jiri+ #4 Not tainted
[ 52.746697] --------------------------------------------
[ 52.752635] kworker/1:3/599 is trying to acquire lock:
[ 52.758378] (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c4fa4>] flush_work+0x3a4/0x5e0
[ 52.767837]
but task is already holding lock:
[ 52.774360] (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.784495]
other info that might help us debug this:
[ 52.791794] Possible unsafe locking scenario:
[ 52.798413] CPU0
[ 52.801144] ----
[ 52.803875] lock(mlxsw_core_driver_name);
[ 52.808556] lock(mlxsw_core_driver_name);
[ 52.813236]
*** DEADLOCK ***
[ 52.819857] May be due to missing lock nesting notation
[ 52.827450] 3 locks held by kworker/1:3/599:
[ 52.832221] #0: (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.842846] #1: ((&(&bridge->fdb_notify.dw)->work)){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.854537] #2: (rtnl_mutex){+.+.}, at: [<ffffffff822ad8e7>] rtnl_lock+0x17/0x20
[ 52.863021]
stack backtrace:
[ 52.867890] CPU: 1 PID: 599 Comm: kworker/1:3 Not tainted 4.14.0-rc3jiri+ #4
[ 52.875773] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016
[ 52.886267] Workqueue: mlxsw_core mlxsw_sp_fdb_notify_work [mlxsw_spectrum]
[ 52.894060] Call Trace:
[ 52.909122] __lock_acquire+0xf6f/0x2a10
[ 53.025412] lock_acquire+0x158/0x440
[ 53.047557] flush_work+0x3c4/0x5e0
[ 53.087571] __cancel_work_timer+0x3ca/0x5e0
[ 53.177051] cancel_delayed_work_sync+0x13/0x20
[ 53.182142] mlxsw_reg_trans_bulk_wait+0x12d/0x7a0 [mlxsw_core]
[ 53.194571] mlxsw_core_reg_access+0x586/0x990 [mlxsw_core]
[ 53.225365] mlxsw_reg_query+0x10/0x20 [mlxsw_core]
[ 53.230882] mlxsw_sp_fdb_notify_work+0x2a3/0x9d0 [mlxsw_spectrum]
[ 53.237801] process_one_work+0x8f1/0x12f0
[ 53.321804] worker_thread+0x1fd/0x10c0
[ 53.435158] kthread+0x28e/0x370
[ 53.448703] ret_from_fork+0x2a/0x40
[ 53.453017] mlxsw_spectrum 0000:01:00.0: EMAD retries (2/5) (tid=bf4549b100000774)
[ 53.453119] mlxsw_spectrum 0000:01:00.0: EMAD retries (5/5) (tid=bf4549b100000770)
[ 53.453132] mlxsw_spectrum 0000:01:00.0: EMAD reg access failed (tid=bf4549b100000770,reg_id=200b(sfn),type=query,status=0(operation performed))
[ 53.453143] mlxsw_spectrum 0000:01:00.0: Failed to get FDB notifications
Fix this by creating another workqueue for EMAD timeouts, thereby
preventing the situation of a work item trying to flush a work item
queued on the same workqueue.
Fixes: caf7297e7a ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here's a pull request to add a new file to the kernel's Documentation directory.
It adds a short document describing the views of how the Linux kernel community
feels about enforcing the license of the kernel.
The patch has been reviewed by a large number of kernel developers already, as
seen by their acks on the patch, and their agreement of the statement with
their names on it. The location of the file was also agreed upon by the
Documentation maintainer, so all should be good there.
For some background information about this statement, see this article
written by some of the kernel developers involved in drafting it:
http://kroah.com/log/blog/2017/10/16/linux-kernel-community-enforcement-statement/
and this article that answers a number of questions that came up in the
discussion of this statement with the kernel developer community:
http://kroah.com/log/blog/2017/10/16/linux-kernel-community-enforcement-statement-faq/
If anyone has any further questions about it, please let me, and the TAB
members, know and we will be glad to help answer them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWeR6Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykG3ACeN9zl6v505gikqm84ZkfBaxuxDVYAni1dqsY7
DCsTizcpTneOYeK/Sh+1
=lbTy
-----END PGP SIGNATURE-----
Merge tag 'enforcement-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull enforcement policy update from Greg KH:
"Documentation: Add a file explaining the requested Linux kernel
license enforcement policy
Here's a new file to the kernel's Documentation directory. It adds a
short document describing the views of how the Linux kernel community
feels about enforcing the license of the kernel.
The patch has been reviewed by a large number of kernel developers
already, as seen by their acks on the patch, and their agreement of
the statement with their names on it. The location of the file was
also agreed upon by the Documentation maintainer, so all should be
good there.
For some background information about this statement, see this article
written by some of the kernel developers involved in drafting it:
http://kroah.com/log/blog/2017/10/16/linux-kernel-community-enforcement-statement/
and this article that answers a number of questions that came up in
the discussion of this statement with the kernel developer community:
http://kroah.com/log/blog/2017/10/16/linux-kernel-community-enforcement-statement-faq/
If anyone has any further questions about it, please let me, and the
TAB members, know and we will be glad to help answer them"
* tag 'enforcement-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Add a file explaining the Linux kernel license enforcement policy
Pull s390 fixes from Martin Schwidefsky:
"Two bug fixes:
- A fix for cputime accounting vs CPU hotplug
- Add two options to zfcpdump_defconfig to make SCSI dump work again"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix zfcpdump-config
s390/cputime: fix guest/irq/softirq times after CPU hotplug
# modprobe trace-events-sample
# echo 1 > /sys/kernel/debug/tracing/events/sample-trace/enable
# rmmod trace-events-sample
This would cause an oops. The issue is that I added another trace
event sample that reused a reg function of another trace event to
create a thread to call the tracepoints. The problem was that the
reg function couldn't handle nested calls (reg; reg; unreg; unreg;)
and created two threads (instead of one) and only removed one
on exit.
This isn't a critical bug as the bug is only in sample code. But sample
code should be free of known bugs to prevent others from copying
it. This is why this is also marked for stable.
-----BEGIN PGP SIGNATURE-----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=xSts
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Testing a new trace event format, I triggered a bug by doing:
# modprobe trace-events-sample
# echo 1 > /sys/kernel/debug/tracing/events/sample-trace/enable
# rmmod trace-events-sample
This would cause an oops. The issue is that I added another trace
event sample that reused a reg function of another trace event to
create a thread to call the tracepoints. The problem was that the reg
function couldn't handle nested calls (reg; reg; unreg; unreg;) and
created two threads (instead of one) and only removed one on exit.
This isn't a critical bug as the bug is only in sample code. But
sample code should be free of known bugs to prevent others from
copying it. This is why this is also marked for stable"
* tag 'trace-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/samples: Fix creation and deletion of simple_thread_fn creation
The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when
it hits an invalid register value read:
BUG: unable to handle kernel paging request at ffffad5dc41f3fff
IP: pci_azx_readl+0x5/0x10 [snd_hda_intel]
Call Trace:
snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core]
azx_probe_continue+0x7d5/0x940 [snd_hda_intel]
.....
This happened on a new Intel machine, and we need to check the value
and abort the loop accordingly.
[Note: the fixes tag below indicates only the commit where this patch
can be applied; the original problem was introduced even before that
commit]
Fixes: 6720b38420 ("ALSA: hda - move bus_parse_capabilities to core")
Cc: <stable@vger.kernel.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The regulator_desc arrays in this driver are indexed by RN5T618_*
constants and some elements can be missing. This causes probe failures
on older models:
rn5t618-regulator rn5t618-regulator: failed to register (null) regulator
rn5t618-regulator: probe of rn5t618-regulator failed with error -22
Fix this by making the arrays flat. This also saves a little memory
because the regulator_desc arrays become smaller.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 83b2a3c2ab ("regulator: rn5t618: add RC5T619 PMIC support")
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASN.1 parser does not necessarily set the sinfo field,
this patch prevents a NULL pointer dereference on broken
input.
Fixes: 99db443506 ("PKCS#7: Appropriately restrict authenticated attributes and content type")
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org # 4.3+
In proc_keys_show(), the key semaphore is not held, so the key ->flags
and ->expiry can be changed concurrently. We therefore should read them
atomically just once.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Similar to the case for key_validate(), we should load the key ->expiry
once atomically in keyring_search_iterator(), since it can be changed
concurrently with the flags whenever the key semaphore isn't held.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
In key_validate(), load the flags and expiry time once atomically, since
these can change concurrently if key_validate() is called without the
key semaphore held. And we don't want to get inconsistent results if a
variable is referenced multiple times. For example, key->expiry was
referenced in both 'if (key->expiry)' and in 'if (now.tv_sec >=
key->expiry)', making it theoretically possible to see a spurious
EKEYEXPIRED while the expiration time was being removed, i.e. set to 0.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Currently, when passed a key that already exists, add_key() will call the
key's ->update() method if such exists. But this is heavily broken in the
case where the key is uninstantiated because it doesn't call
__key_instantiate_and_link(). Consequently, it doesn't do most of the
things that are supposed to happen when the key is instantiated, such as
setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and
awakening tasks waiting on it, and incrementing key->user->nikeys.
It also never takes key_construction_mutex, which means that
->instantiate() can run concurrently with ->update() on the same key. In
the case of the "user" and "logon" key types this causes a memory leak, at
best. Maybe even worse, the ->update() methods of the "encrypted" and
"trusted" key types actually just dereference a NULL pointer when passed an
uninstantiated key.
Change key_create_or_update() to wait interruptibly for the key to finish
construction before continuing.
This patch only affects *uninstantiated* keys. For now we still allow a
negatively instantiated key to be updated (thereby positively
instantiating it), although that's broken too (the next patch fixes it)
and I'm not sure that anyone actually uses that functionality either.
Here is a simple reproducer for the bug using the "encrypted" key type
(requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug
pertained to more than just the "encrypted" key type:
#include <stdlib.h>
#include <unistd.h>
#include <keyutils.h>
int main(void)
{
int ringid = keyctl_join_session_keyring(NULL);
if (fork()) {
for (;;) {
const char payload[] = "update user:foo 32";
usleep(rand() % 10000);
add_key("encrypted", "desc", payload, sizeof(payload), ringid);
keyctl_clear(ringid);
}
} else {
for (;;)
request_key("encrypted", "desc", "callout_info", ringid);
}
}
It causes:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: encrypted_update+0xb0/0x170
PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0
PREEMPT SMP
CPU: 0 PID: 340 Comm: reproduce Tainted: G D 4.14.0-rc1-00025-g428490e38b2e #796
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff8a467a39a340 task.stack: ffffb15c40770000
RIP: 0010:encrypted_update+0xb0/0x170
RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000
RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303
RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17
R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f
FS: 00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0
Call Trace:
key_create_or_update+0x2bc/0x460
SyS_add_key+0x10c/0x1d0
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x7f5d7f211259
RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8
RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259
RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04
RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004
R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868
R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000
Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b
RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8
CR2: 0000000000000018
Cc: <stable@vger.kernel.org> # v2.6.12+
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Biggers <ebiggers@google.com>
Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection
error into one field such that:
(1) The instantiation state can be modified/read atomically.
(2) The error can be accessed atomically with the state.
(3) The error isn't stored unioned with the payload pointers.
This deals with the problem that the state is spread over three different
objects (two bits and a separate variable) and reading or updating them
atomically isn't practical, given that not only can uninstantiated keys
change into instantiated or rejected keys, but rejected keys can also turn
into instantiated keys - and someone accessing the key might not be using
any locking.
The main side effect of this problem is that what was held in the payload
may change, depending on the state. For instance, you might observe the
key to be in the rejected state. You then read the cached error, but if
the key semaphore wasn't locked, the key might've become instantiated
between the two reads - and you might now have something in hand that isn't
actually an error code.
The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error
code if the key is negatively instantiated. The key_is_instantiated()
function is replaced with key_is_positive() to avoid confusion as negative
keys are also 'instantiated'.
Additionally, barriering is included:
(1) Order payload-set before state-set during instantiation.
(2) Order state-read before payload-read when using the key.
Further separate barriering is necessary if RCU is being used to access the
payload content after reading the payload pointers.
Fixes: 146aa8b145 ("KEYS: Merge the type-specific data with the payload data")
Cc: stable@vger.kernel.org # v4.4+
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
For finding asymmetric key, the input id_0 and id_1 parameters can
not be NULL at the same time. This patch adds the BUG_ON checking
for id_0 and id_1.
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the wrong index number when checking the existence of second
id in function of finding asymmetric key. The id_1 is the second
id that the index in array must be 1 but not 0.
Fixes: 9eb029893a (KEYS: Generalise x509_request_asymmetric_key())
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
ZHU Yi (ST-FIR/ENG1-Zhu)