Since NVIDIA Tegra is supported now by the ChipIdea USB driver, let's
enable this driver in tegra_defconfig.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This selects both the Tegra20 and Tegra30 I2S interfaces (that were
previously auto-selected by Kconfig but are not anymore) to
tegra_defconfig, as built-ins.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.13-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra is currently configured to use the old input driver for the
MPU-3050. Switch to the new IIO driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The NVIDIA Tegra 3 aka T30 based Apalis T30 and Colibri T30 as well as
the new Tegra K1 aka TK1 based Apalis TK1 modules contain a Freescale
SGTL5000 analogue audio codec.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regenerate the default configuration on top of v4.9-rc1. This shuffles
around a couple of symbols and drops some that have become defaults or
which were dropped.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update the Tegra default configuration for the following features:
- expose hardware/virtual IRQ mapping via debugfs
- WM9712 audio/touch controller as found on Colibri T20
- sysfs interface for GPIOs
- NFS client support for NFS version 4
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As a result of rebuilding the configuration the following symbols are
removed:
- EXT4_FS: ext3 has finally been removed from the kernel. ext4
provides feature parity and can be used to mount ext3 filesystems.
EXT3_FS selects EXT4_FS.
- EXT3_DEFAULTS_TO_ORDERED: Removed as part of the ext3 filesystem
removal.
- IPV6: IPv6 is now built-in by default
Signed-off-by: Thierry Reding <treding@nvidia.com>
Removes the following entries from the default configuration:
- PM: enabled by default (via PM_SLEEP -> SUSPEND)
- RESOURCE_COUNTERS: removed
Signed-off-by: Thierry Reding <treding@nvidia.com>
Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
This patch was generated by running 'make tegra_defconfig' followed by
'make savedefconfig' with the v3.18-rc1 tag checked out. Two values go
away: CONFIG_SCSI is selected by CONFIG_ATA and CONFIG_SCSI_MULTI_LUN
was removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
controller, as used on Jetson TK1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUGxqvAAoJEMzrak5tbycx4+wP/idwSloMKvyBv5sH54sXvAhW
eBnB8cVfqHpxvHrlitJd7QPdacISiwMs3v4lY+QIrxhKP8vJqGQF2uT/JjE5NPxs
tfOMoUStrcdeuvFpHOS3vWMGvMlERVdRcnrt35g+EtOlQnQWuENUOVR8J1J6sA/j
FAwY8VbGH1Onve0OO/aeXCvJAHqn6lI/UgM3VFlzceA4yWJ/BdJwu1aRtehV6kxz
O1h9YM6JXOnhJ1BUE5dFyw1WFpH6Qg7IndgUR3SDpJvk4GfDAuNLzmW8DfYzBohY
PxUV/DzM8nAtT7Uuaww/Bnr21bR1jmj2NQ82UC795AIpMBbMmX9+Zr3WHmMEsdNu
Jj8uFYvAXCU/0r8kF/M9PF4PZcmkUD6fsESrYkqTPPNaVNSgXJviQTzu/ayBrixm
EYSJdwr7DDxz7fkV6OaddXOt/dcwH8sOEi7wG0SFZTvCDLGVGcXK2J9FgULH9fMg
vJt/p4/FDmUbzhBWXN9tseIMUatnRXoic0YMFXde6CLWCM/aZG3ZIkAa5usVTnTF
BgytcX6tcg+melHeMiylBi1BfxT6UdjJVI/djQC96ykRdM8OIKRDgTtXKczT+0Rh
XGlbE0JP2TxteOlB6TTBV1s5bQiZxChBGxrEduJx50dxLi79zB3rPPmoloqDn+xo
ituxm3nNSpDIpi+mLFjm
=cO5m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/defconfig
Pull "ARM: tegra: tegra_defconfig changes for 3.18" from Stephen Warren:
Support is enabled for Venice2's touchpad, and Tegra124's AHCI (SATA)
controller, as used on Jetson TK1.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable Atmel touchpad in defconfig
ARM: tegra: Add options for Tegra AHCI support to tegra_defconfig
Contains an update to 3.17-rc2.
The virtual consumer is a test device intended to be used while developing
regulator drivers, it should never be used in production. Remove it from
all defconfigs to avoid confusion among users.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds ATA, SATA_AHCI and AHCI_TEGRA support to tegra_defconfig
so that the SATA support will be automatically enabled.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The NVIDIA Tegra 3 based Apalis T30 module contains an Intel i210 or
i211 gigabit Ethernet controller, an STMPE811 ADC/touch controller, I2C
buses and PWM LEDs generically accessible from user space and an
LM95245 temperature sensor chip. The later four can also be found on
the Colibri T30 module.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
[swarren, dropped chunk contained in previous commit that rebuilt the
defconfig file]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Run "make tegra_defconfig; make savedefconf" on v3.16-rc1. This allows
other people to do the same thing to adjust the defconfig file without
their patch bringing in a bunch of irrelevant diffs.
All of the removed options either have been removed from Kconfig, or
are now default y.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
AT24C EEPROM:
This is used for the board ID EEPROM on Jetson TK1, as well as likely
a whole slew of other NVIDIA reference boards; we simply haven't added
enabled the EEPROM in the DT files until now.
MTD_SPI_NOR:
This defconfig contains the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
FRAMEBUFFER_CONSOLE_ROTATION:
Needed for devices like Tegra Note 7 and NVIDIA SHIELD to get the boot
console in the expected orientation.
CAN*, RTC_DRV_DS1307:
Toradex Colibri Evaluation Board uses the DS1307 RTC and the MCP251x CAN
controller. The NVIDIA Tegra 3 based Colibri T30 module can be used on
this carrier board.
Furthermore the NVIDIA Tegra 3 based Apalis T30 module too contains two
MCP251x CAN controllers.
INPUT_JOYDEV:
NVIDIA SHIELD embeds a USB joystick device.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
As we continue to replace board files with device tree descriptions,
this part of the ARM support is getting smaller. We have basically just
defconfig changes here this time, and a significant number of Renesas
shmobile changes, as Renesas is still in the process of deprecating
board file support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=q7Vc
-----END PGP SIGNATURE-----
Merge tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board changes from Arnd Bergmann:
"As we continue to replace board files with device tree descriptions,
this part of the ARM support is getting smaller. We have basically
just defconfig changes here this time, and a significant number of
Renesas shmobile changes, as Renesas is still in the process of
deprecating board file support"
* tag 'boards-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
ARM: enable fhandle in multi_v7_defconfig
ARM: tegra: enable fhandle in tegra_defconfig
ARM: update multi_v7_defconfig for Tegra
ARM: add Marvell Dove and some drivers to multi_v7 defconfig
ARM: fix duplicate symbols in multi_v5_defconfig
ARM: pxa: add gpio keys information
ARM: tegra: defconfig updates
ARM: config: keystone: enable AEMIF/NAND support
ARM: qcom: Enable basic support for Qualcomm platforms in multi_v7_defconfig
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
ARM: config: Add mvebu_v5_defconfig
ARM: config: Add a multi_v5_defconfig
ARM: shmobile: r7s72100: update defconfig for I2C usage
ARM: shmobile: Remove Lager DT reference legacy clock bits
ARM: shmobile: Remove Koelsch DT reference legacy clock bits
ARM: shmobile: Remove KZM9D board code
ARM: mvebu: update defconfigs for Armada 375 and 38x
ARM: dove: Enable watchdog support in the defconfig
ARM: mvebu: Enable watchdog support in defconfig
ARM: config: keystone: enable led support
...
CONFIG_FHANDLE is required by systemd >= 210 to spawn a serial TTY.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
for the majority of use-cases. This can still be overridden by the cma
command-line option.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The last time tegra_defconfig was rebuilt, various LEDs options were
somehow selected by other options, and hence their entries in
tegra_defconfig were removed by "make savedefconfig". However, for some
reason this is no longer happening, so we need to add the entries back
into tegra_defconfig so the they are enabled in .config.
Fixes: db079b1811 ("ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS)"
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled
by tegra_defconfig. However, this config option no longer exists, so
no longer selects DEBUG_FS, and nothing else selects it either. So,
"make tegra_defconfig" no longer enables DEBUG_FS in .config.
Rebuild tegra_defconfig on top of next-20140424, while manually
re-enabling DEBUG_FS.
Reasons for removed entries are:
- I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT
- DRM_PANEL: selected by DRM_TEGRA
- NEW_LEDS: selected by many things; at least VT
- LEDS_CLASS: selected by many things; at least VT
- LEDS_TRIGGERS: selected by many things; at least VT
- COMMON_CLK_DEBUG: no longer exists
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Updates of SoC-near drivers and other driver updates that makes more sense to
take through our tree.
The largest part of this is a conversion of device registration for some
renesas shmobile/sh devices over to use resources. This has required
coordination with the corresponding arch/sh changes, and we've agreed
to merge the arch/sh changes through our tree.
Added in this branch is support for Trusted Foundations secure firmware,
which is what is used on many of the commercial Nvidia Tegra products
that are in the market, including the Nvidia Shield. The code is local
to arch/arm at this time since it's uncertain whether it will be shared
with arm64 longer-term, if needed we will refactor later.
A couple of new RTC drivers used on ARM boards, merged through our tree
on request by the RTC maintainer.
... plus a bunch of smaller updates across the board, gpio conversions
for davinci, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=JJlw
-----END PGP SIGNATURE-----
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM driver updates from Olof Johansson:
"Updates of SoC-near drivers and other driver updates that makes more
sense to take through our tree.
The largest part of this is a conversion of device registration for
some renesas shmobile/sh devices over to use resources. This has
required coordination with the corresponding arch/sh changes, and
we've agreed to merge the arch/sh changes through our tree.
Added in this branch is support for Trusted Foundations secure
firmware, which is what is used on many of the commercial Nvidia Tegra
products that are in the market, including the Nvidia Shield. The
code is local to arch/arm at this time since it's uncertain whether it
will be shared with arm64 longer-term, if needed we will refactor
later.
A couple of new RTC drivers used on ARM boards, merged through our
tree on request by the RTC maintainer.
... plus a bunch of smaller updates across the board, gpio conversions
for davinci, etc"
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
watchdog: davinci: rename platform driver to davinci-wdt
tty: serial: Limit msm_serial_hs driver to platforms that use it
mmc: msm_sdcc: Limit driver to platforms that use it
usb: phy: msm: Move mach dependent code to platform data
clk: versatile: fixup IM-PD1 clock implementation
clk: versatile: pass a name to ICST clock provider
ARM: integrator: pass parent IRQ to the SIC
irqchip: versatile FPGA: support cascaded interrupts from DT
gpio: davinci: don't create irq_domain in case of unbanked irqs
gpio: davinci: use chained_irq_enter/chained_irq_exit API
gpio: davinci: add OF support
gpio: davinci: remove unused variable intc_irq_num
gpio: davinci: convert to use irqdomain support.
gpio: introduce GPIO_DAVINCI kconfig option
gpio: davinci: get rid of DAVINCI_N_GPIO
gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
serial: sh-sci: Add OF support
serial: sh-sci: Add device tree bindings documentation
serial: sh-sci: Remove platform data mapbase and irqs fields
serial: sh-sci: Remove platform data scbrr_algo_id field
...
Enable DRM panel core support along with support for various simple
panels.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Support for Trusted Foundations is light and allows the kernel to run on
a wider range of devices, so enable it by default.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Add some features to tegra_defconfig:
* Tegra+MAX98090 audio machine driver, as used on the Venice2 board.
* AMX3722 PMIC, as used on the Venice2 board.
* ChromeOS embedded controller, for the Venice2 keyboard.
Also, rebuild tegra_defconfig on a more recent kernel (3.13-rc1) to
minimize irrelevant diffs showing up when people edit the file.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
ARCH_TEGRA_124_SOC: Tegra124 SoC support.
CPU_FREQ_STAT_DETAILS: Enables various sysfs files that are useful when
testing cpufreq.
CONFIG_COMMON_CLK_DEBUG: Useful to look at the clock tree to verify that
clocks for the various devices have been properly set up.
PINCTRL_PALMAS: Used on Dalmore board.
NEON: Enables SIMD instruction support for Tegra30 and later SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches,
but most of this is around legacy code and board support. We've found that
platform maintainers have a hard time separating all of these out and might
move towards fewer branches for next release.
- Removal of a number of Marvell Kirkwood board files, since contents
is now common and mostly configured via DT.
- Device-tree updates for Marvell Dove, including irqchip and clocksource
setup.
- Defconfig updates. Gotta go somewhere. One new one for Renesas Lager.
- New backlight drivers for backlights used on Renesas shmobile platforms.
- Removal of Renesas leds driver.
- Shuffling of some of the new Broadcom platforms to give room for others in
the same mach directory. More in 2.13.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=EGua
-----END PGP SIGNATURE-----
Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC board updates from Olof Johansson:
"Board updates for 3.12. Again, a bit of domain overlap with SoC and
DT branches, but most of this is around legacy code and board support.
We've found that platform maintainers have a hard time separating all
of these out and might move towards fewer branches for next release.
- Removal of a number of Marvell Kirkwood board files, since contents
is now common and mostly configured via DT.
- Device-tree updates for Marvell Dove, including irqchip and
clocksource setup.
- Defconfig updates. Gotta go somewhere. One new one for Renesas
Lager.
- New backlight drivers for backlights used on Renesas shmobile
platforms.
- Removal of Renesas leds driver.
- Shuffling of some of the new Broadcom platforms to give room for
others in the same mach directory. More in 3.13"
* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
ARM: bcm: Make secure API call optional
ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
ARM: bcm: Rename board_bcm
mmc: sdhci-bcm-kona: make linker-section warning go away
ARM: tegra: defconfig updates
ARM: dove: add initial DT file for Globalscale D2Plug
ARM: dove: add GPIO IR receiver node to SolidRun CuBox
ARM: dove: add common pinmux functions to DT
ARM: dove: add cpu device tree node
ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
ARM: kirkwood: fix DT building and update defconfig
ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
ARM: configs: disable DEBUG_LL in bcm_defconfig
ARM: bcm281xx: Board specific reboot code
ARM bcm281xx: Turn on socket & network support.
ARM: bcm281xx: Turn on L2 cache.
...
Pull KVM updates from Gleb Natapov:
"The highlights of the release are nested EPT and pv-ticketlocks
support (hypervisor part, guest part, which is most of the code, goes
through tip tree). Apart of that there are many fixes for all arches"
Fix up semantic conflicts as discussed in the pull request thread..
* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits)
ARM: KVM: Add newlines to panic strings
ARM: KVM: Work around older compiler bug
ARM: KVM: Simplify tracepoint text
ARM: KVM: Fix kvm_set_pte assignment
ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256
ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs
ARM: KVM: vgic: fix GICD_ICFGRn access
ARM: KVM: vgic: simplify vgic_get_target_reg
KVM: MMU: remove unused parameter
KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate()
KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls
KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX
KVM: x86: update masterclock when kvmclock_offset is calculated (v2)
KVM: PPC: Book3S: Fix compile error in XICS emulation
KVM: PPC: Book3S PR: return appropriate error when allocation fails
arch: powerpc: kvm: add signed type cast for comparation
KVM: x86: add comments where MMIO does not return to the emulator
KVM: vmx: count exits to userspace during invalid guest emulation
KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp
kvm: optimize away THP checks in kvm_is_mmio_pfn()
...
Enable:
* SYSVIPC (needed for some apps, e.g. fakeroot).
* Elantech touchpad (touchpad on AC100).
* SCSI_MULTI_LUN (needed for some USB SD card readers).
* PCI, MSI, and Tegra's PCIe driver.
* USB XHCI; useful for testing PCIe.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Enable some new features:
* The Tegra114 SPI controller, for Dalmore's SPI flash.
* Set all the GPIO leds triggers to their "if you don't know, say X"
value, so there are some useful triggers for the gpio-leds support.
* TPS65090 charger, for Dalmore.
* ASoC RT5640 machine driver, for audio on Beaver and Dalmore.
Also, rebuild tegra_defconfig on top of linux-next. This should make it
easier to create future defconfig patches, without extraneous diffs.
This should introduce no changes; simply moving entries around due to
Kconfig ordering changes. The apparent exceptions are:
* AUTO_ZRELADDR: Selected by ARM multi-platform support.
* MTD_CHAR: Removed in Kconfig.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
[swarren, squashed various patches]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The AK8975 Kconfig option was renamed during the 3.10 merge window.
Adjust tegra_defconfig to enable the new name, so it's not missing
useful features.
Tegra DRM support used to be enabled in the default Tegra configuration,
but it now depends on CONFIG_TEGRA_HOST1X which is disabled by default.
Enable CONFIG_TEGRA_HOST1X so that DRM support is compiled in again.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
[swarren, squashed Alex's and my changes together]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update tegra_defconfig to:
* Enable CONFIG_ARCH_TEGRA_114_SOC.
* Enable various PMIC and related options for Tegra114 platforms Dalmore
and pluto: Palmas, TPS51362, TPS65090.
* Enable KEYBOARD_GPIO, mainly as a suspend wakeup source.
* Rebuild tegra_defconfig based on v3.9-rc1, hence picking up various
move/remove changes, and removing some entries for now-default or
selected options.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Add:
* RTC_DRV_TPS6586X to enable the RTC on many boards, such as Harmony
and Ventana.
* POWER_RESET_GPIO to provide a power off driver for TrimSlice.
* Tegra KBC controller support, for Seaboard.
* Tegra high-speed UART driver, for Cardhu Bluetooth.
* kexec support.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
New options enabled:
* BRCMFMAC: wlan driver, enable as module.
* MTD, MTD_CHAR, MTD_M25P80, SPI_TEGRA20_SLINK, CONFIG_SPI_TEGRA20_SFLASH
to enable serial flash on Cardhu and TrimSlice.
* PWM/backlight features for use with tegradrm.
* tegradrm; Tegra's new display driver.
* CMA, so that tegradrm can allocate large buffers.
* SquashFS, which is used as the root filesystem on boards based on
the Tamonten processor module.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This might be the last time we do a standalone defconfig branch,
since we now prefer to get them with the rest of the subarch updates
instead. These add a handful of useful options on various platforms,
enable new boards and SoCs, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=+zKc
-----END PGP SIGNATURE-----
Merge tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc defconfig updates from Olof Johansson:
"This might be the last time we do a standalone defconfig branch, since
we now prefer to get them with the rest of the subarch updates
instead. These add a handful of useful options on various platforms,
enable new boards and SoCs, etc."
* tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: defconfig updates
ARM: LPC32xx: Defconfig update
ARM: mach-shmobile: marzen: defconfig update
ARM: mxs_defconfig: Add SPI and LRADC support
ARM: s3c6400_defconfig: enable more boards in defconfig
ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support
ARM: mxs_defconfig: Add framebuffer support
ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
ARM: mxs_defconfig: Enable USB host
Enable config for dmaengine based Tegra APB DMA driver and
disable the legacy APB DMA driver (SYSTEM_DMA).
[swarren: removed CONFIG_TEGRA_SYSTEM_DMA not set line, since the option
is removed entirely in a later patch]
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Removed:
* MACH_HARMONY
* MACH_PAZ00
* MACH_TRIMSLICE
These used to enable board support for individual boards. Now that we
only support device tree, these options have been removed.
Added:
* TEGRA_PCI
This used to be selected by the board options above. Select this
explicitly now that the board options have been removed.
* TEGRA_DEBUG_UART_AUTO_ODMDATA
This makes the kernel automatically pick a UART for earlyprintk. It's
likely to be a useful option for everyone.
* PWM
* PWM_TEGRA
Enable the new PWM subsystem, and the Tegra driver within it.
* GPIO_PCA953X
* GPIO_PCA953X_IRQ
* MFD_MAX8907
* REGULATOR_MAX8907
* RTC_DRV_MAX8907
* RTC_DRV_TPS65910
Various drivers required for the Whistler board.
* RTC_INTF_SYSFS
* RTC_INTF_PROC
* RTC_INTF_DEV
Some RTC options that Kconfig help implies should typically be
enabled.
* Wifi chip (rt3070)
* Bluetooth (btusb)
* Camera (uvcvideo)
* 3G modem (acm and wdm)
* rfkill
* GPIO LEDs
* NVEC
Various devices and features found on PAZ00 boards.
Some of these are enabled as modules because they are not needed for
boot and will not be used on other boards. Wifi also needs to be
module because of the firmware loader.
The update also enabled support for the rfkill switch, the Wifi LED and
the nvec power and led driver which got lost in the past.
* DEVTMPFS, TMPFS_POSIX_ACL
These are mandatory on modern linux distros.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
We have support for a few new drivers:
- Samsung s2mps11
- Wolfson Microelectronics wm5102 and wm5110
- Marvell 88PM800 and 88PM805
- TI twl6041
We also have our regular driver improvements:
- Device tree and IRQ domain support for STE AB8500
- Regmap and devm_* API conversion for TI tps6586x
- Device tree support for Samsung max77686
- devm_* API conversion for STE AB3100
Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
tps65090, da9052 and twl-core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG
lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e
52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz
aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8
+Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++
RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux
A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX
nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h
hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH
XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A
OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei
jNEz1H6hu7ToNLfs0UzP
=c28c
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFD bits from Samuel Ortiz:
"We have support for a few new drivers:
- Samsung s2mps11
- Wolfson Microelectronics wm5102 and wm5110
- Marvell 88PM800 and 88PM805
- TI twl6041
We also have our regular driver improvements:
- Device tree and IRQ domain support for STE AB8500
- Regmap and devm_* API conversion for TI tps6586x
- Device tree support for Samsung max77686
- devm_* API conversion for STE AB3100
Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
tps65090, da9052 and twl-core."
Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI:
centralize controller initialization") that clashed with commit
2761a63945 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").
In particular, commit 2761a63945 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).
I left that part of commit 2761a63945 just undone.
* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
mfd: Arizone core should select MFD_CORE
mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
mfd: Add debug trace on entering and leaving arizone runtime suspend
mfd: Correct tps65090 cell names
mfd: Remove gpio support from tps6586x core driver
ARM: tegra: defconfig: Enable tps6586x gpio
gpio: tps6586x: Add gpio support through platform driver
mfd: Cache tps6586x register through regmap
mfd: Use regmap for tps6586x register access.
mfd: Use devm managed resources for tps6586x
input: Add onkey support for 88PM80X PMIC
mfd: Add support for twl6041
mfd: Fix twl6040 revision information
mfd: Matches should be NULL when populate anatop child devices
input: ab8500-ponkey: Create AB8500 domain IRQ mapping
mfd: Add missing out of memory check for pcf50633
Documentation: Describe the AB8500 Device Tree bindings
mfd: Add tps65910 32-kHz-crystal-input init
mfd: Drop modifying mc13xxx driver's id_table in probe
...
Enable GPIO_TPS6586X as the gpio functionality of
this device moved as platform driver.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
New options enabled:
* RUNTIME_PM
* ISL29028 (light and proximity)
* INPUT_MPU3050 (gyro)
* BATTERY_SBS
* EM3027 RTC
* INPUT_MISC (dependency)
* POWER_SUPPLY (dependency)
The IIO option seems to have been moved recently too.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Refresh tegra_defconfig:
New options enabled:
* PERF_EVENTS
* Tegra EMC scaling
* Support for all 4 CPUs on Tegra30
* AUTO_ZRELADDR for unified Tegra20+Tegra30 images
* CPU_FREQ/CPU_IDLE
* BLK_DEV_SR
* INPUT_EVDEV
* Regulators, including fixed, GPIO, TPS6586x
* Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100)
* NVEC (staging, for Paz00/Toshiba AC100)
* IOMMU for Tegra20's GART and Tegra30's SMMU
* TEGRA_AES
* ext4, for trim support on SD/eMMC
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the defconfig for tegra due to the addition of tegra30 and rename
of t20/t30 options.
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Warren <swarren@nvidia.com>
Dmitry Osipenko