Previously, we need to calculate the max orphan num when we try to acquire an
orphan inode, but it's a stable value since the super block was inited. So
converting it to a field of f2fs_sb_info and use it directly when needed seems
a better choose.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs supports 4KB block size. If user requests dwrite with under 4KB data,
it allocates a new 4KB data block.
However, f2fs doesn't add zero data into the untouched data area inside the
newly allocated data block.
This incurs an error during the xfstest #263 test as follow.
263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad)
--- 263.out 2013-03-09 03:37:15.043967603 +0900
+++ 263.out.bad 2013-12-27 04:20:39.230203114 +0900
@@ -1,3 +1,976 @@
QA output created by 263
fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
-fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+truncating to largest ever: 0x12a00
+truncating to largest ever: 0x75400
+fallocating to largest ever: 0x79cbf
...
(Run 'diff -u 263.out 263.out.bad' to see the entire diff)
Ran: 263
Failures: 263
Failed 1 of 1 tests
It turns out that, when the test tries to write 2KB data with dio, the new dio
path allocates 4KB data block without filling zero data inside the remained 2KB
area. Finally, the output file contains a garbage data for that region.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When get_dnode_of_data() in get_data_block() returns a successful dnode, we
should put the dnode.
But, previously, if its data block address is equal to NEW_ADDR, we didn't do
that, resulting in a deadlock condition.
So, this patch splits original error conditions with this case, and then calls
f2fs_put_dnode before finishing the function.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.
struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i;
-> struct f2fs_inode *ri = F2FS_INODE(inode_page);
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In current flow, we will get Null return value of f2fs_find_entry in
recover_dentry when name.len is bigger than F2FS_NAME_LEN, and then we
still add this inode into its dir entry.
To avoid this situation, we must check filename length before we use it.
Another point is that we could remove the code of checking filename length
In f2fs_find_entry, because f2fs_lookup will be called previously to ensure of
validity of filename length.
V2:
o add WARN_ON() as Jaegeuk Kim suggested.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When we rename a dir to new name which is not exist previous,
we will set pino of parent inode with ino of child inode in f2fs_set_link.
It destroy consistency of pino, it should be fixed.
Thanks for previous work of Shu Tan.
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When using the f2fs_io_info in the low level, we still need to merge the
rw and rw_flag, so use the rw to hold all the io flags directly,
and remove the rw_flag field.
ps.It is based on the previous patch:
f2fs: move all the bio initialization into __bio_alloc
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Move all the bio initialization into __bio_alloc, and some minor cleanups are
also added.
v3:
Use 'bool' rather than 'int' as Kim suggested.
v2:
Use 'is_read' rather than 'rw' as Yu Chao suggested.
Remove the needless initialization of bio->bi_private.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enhances writing dirty meta pages collectively in background.
During the file data writes, it'd better avoid to write small dirty meta pages
frequently.
So let's give a chance to collect a number of dirty meta pages for a while.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs doesn't support direct IOs with high performance, which throws
every write requests via the buffered write path, resulting in highly
performance degradation due to memory opeations like copy_from_user.
This patch introduces a new direct IO path in which every write requests are
processed by generic blockdev_direct_IO() with enhanced get_block function.
The get_data_block() in f2fs handles:
1. if original data blocks are allocates, then give them to blockdev.
2. otherwise,
a. preallocate requested block addresses
b. do not use extent cache for better performance
c. give the block addresses to blockdev
This policy induces that:
- new allocated data are sequentially written to the disk
- updated data are randomly written to the disk.
- f2fs gives consistency on its file meta, not file data.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.
Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.
This patch suggests 5 polcies and their triggering conditions as follows.
[sysfs entry name = ipu_policy]
0: F2FS_IPU_FORCE all the time,
1: F2FS_IPU_SSR if SSR mode is activated,
2: F2FS_IPU_UTIL if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL if SSR mode is activated and FS utilization is over
threashold,
4: F2FS_IPU_DISABLE disable IPU. (=default option)
[sysfs entry name = min_ipu_util]
This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.
For more details, see need_inplace_update() in segment.h.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch introduces f2fs_io_info to mitigate the complex parameter list.
struct f2fs_io_info {
enum page_type type; /* contains DATA/NODE/META/META_FLUSH */
int rw; /* contains R/RS/W/WS */
int rw_flag; /* contains REQ_META/REQ_PRIO */
}
1. f2fs_write_data_pages
- DATA
- WRITE_SYNC is set when wbc->WB_SYNC_ALL.
2. sync_node_pages
- NODE
- WRITE_SYNC all the time
3. sync_meta_pages
- META
- WRITE_SYNC all the time
- REQ_META | REQ_PRIO all the time
** f2fs_submit_merged_bio() handles META_FLUSH.
4. ra_nat_pages, ra_sit_pages, ra_sum_pages
- META
- READ_SYNC
Cc: Fan Li <fanofcode.li@samsung.com>
Cc: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages
submits last write requests by sync_mode flags callers pass.
This causes a performance problem since continuous pages with different sync flags
can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous
requests often take more time.
This patch makes the following modifies to DATA writebacks:
1. every page will be written back using the sync mode caller pass.
2. only pages with the same sync mode can be merged in one bio request.
These changes are restricted to DATA pages.Other types of writebacks are modified
To remain synchronous.
In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% ,
and this patch has no obvious impact on other performance tests.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.
Change log from v1:
- Don't add unlikely for the NULL test and error test: advised by Andi Kleen.
Cc: Chao Yu <chao2.yu@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As we know, some of our branch condition will rarely be true. So we could add
'unlikely' to let compiler optimize these code, by this way we could drop
unneeded 'jump' assemble code to improve performance.
change log:
o add *unlikely* as many as possible across the whole source files at once
suggested by Jaegeuk Kim.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In find_fsync_dnodes() and recover_data(), our flow is like this:
->f2fs_submit_page_bio()
-> f2fs_put_page()
-> page_cache_release() ---- page->_count declined to zero.
->__free_pages()
-> put_page_testzero() ---- page->_count will be declined again.
We will get a segment fault in put_page_testzero when CONFIG_DEBUG_VM
is on, or return MM with a bad page with wrong _count num.
So let's just release this page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for
simplification of code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This minor change for the naming conventions of debugfs_root
to avoid any possible conflicts to the other filesystem.
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
[Jaegeuk Kim: change the patch name]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When debugfs_create_file() failed in f2fs_create_root_stats(),
debugfs_root should be remove.
Signed-off-by: Younger Liu <liuyiyang@hisense.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment
one by one, it makes low performance. So let's merge contiguous pages and
readahead for better performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: adjust the new bio operations]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch integrates redundant bio operations on read and write IOs.
1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
submit_write_page.
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com >
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously f2fs allocates its own bi_private data structure all the time even
though we don't use it. But, can we remove this bi_private allocation?
This patch removes such the additional bi_private allocation.
1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb.
- This removes the usecases of bi_private in end_io.
2. Use bi_private only when we really need it.
- The bi_private is used only when the checkpoint procedure is conducted.
- When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio
completion.
- Since we have no dependancies to remove bi_private now, let's just use
bi_private pointer as the completion pointer.
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The recover_orphan_inodes() returns no error all the time, so we don't need to
check its errors.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should return error if we do not get an updated page in find_date_page
when f2fs_readpage failed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The inode_page_locked should be a boolean variable.
struct dnode_of_data {
struct inode *inode; /* vfs inode pointer */
struct page *inode_page; /* its inode page, NULL is possible */
struct page *node_page; /* cached direct node page */
nid_t nid; /* node id of the direct node block */
unsigned int ofs_in_node; /* data offset in the node page */
==> bool inode_page_locked; /* inode page is locked or not */
block_t data_blkaddr; /* block address of the node block */
};
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The void *wait in bio_private is used for waiting completion of checkpoint bio.
So we don't need to use its type as void, but declare it as completion type.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: add description]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Because we will write node summaries when do_checkpoint with umount flag,
our number of max orphan blocks should minus NR_CURSEG_NODE_TYPE additional.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Because FALLOC_FL_PUNCH_HOLE flag must be ORed with FALLOC_FL_KEEP_SIZE
in fallocate, so we could remove the useless 'keep size' branch code which
will never be excuted in punch_hole.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
[Jaegeuk Kim: remove an unnecessary parameter togather]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch removes the unnecessary condition checks on:
fs/f2fs/gc.c:667 do_garbage_collect() warn: 'sum_page' isn't an ERR_PTR
fs/f2fs/f2fs.h:795 f2fs_put_page() warn: 'page' isn't an ERR_PTR
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch fixes some bit overflows by the shift operations.
Dan Carpenter reported potential bugs on bit overflows as follows.
fs/f2fs/segment.c:910 submit_write_page()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/checkpoint.c:429 get_valid_checkpoint()
warn: should '1 << ()' be a 64 bit type?
fs/f2fs/data.c:408 f2fs_readpage()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:457 submit_read_page()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:525 get_data_block_ro()
warn: should 'i << blkbits' be a 64 bit type?
Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Fix a potential out of range issue introduced by commit:
22fb72225a
f2fs: simplify write_orphan_inodes for better readable
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add a mount option: inline_data. If the mount option is set,
data of New created small files can be stored in their inode.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate
whether the inode has inline data.
Inline data makes use of inode block's data indices region to save small
file. Currently there are 923 data indices in an inode block. Since
inline xattr has made use of the last 50 indices to save its data, there
are 873 indices left which can be used for inline data. When
FI_INLINE_DATA is set, the layout of inode block's indices region is
like below:
+-----------------+
| | Reserved. reserve_new_block() will make use of
| i_addr[0] | i_addr[0] when we need to reserve a new data block
| | to convert inline data into regular one's.
|-----------------|
| | Used by inline data. A file whose size is less than
| i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra
| | blocks by fallocate() can be saved here.
|-----------------|
| |
| i_addr[873~922] | Reserved for inline xattr
| |
+-----------------+
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Let's send REQ_META or REQ_PRIO when reading meta area such as NAT/SIT
etc.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch inserts information of bio types in more detail.
So, we can now see REQ_META and REQ_PRIO too.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add the function f2fs_reserve_block() to easily reserve new blocks, and
use it to clean up more codes.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously we read sit entries page one by one, this method lost the chance
of reading contiguous page together. So we read pages as contiguous as
possible for better mount performance.
change log:
o merge judgements/use 'Continue' or 'Break' instead of 'Goto' as Gu Zheng
suggested.
o add mark_page_accessed() before release page to delay VM reclaiming.
o remove '*order' for simplification of function as Jaegeuk Kim suggested.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: fix a bug on the block address calculation]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for f2fs_submit_read_bio.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_bio]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a tracepoint for submit_read_page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_page]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
It is not efficient comparing each segment type to find node or data.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: remove unnecessary white spaces]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o add mark_page_accessed() not to reclaim the nat pages.
This patch changes the policy of submitting read bios at ra_nat_pages.
Previously, f2fs submits small read bios with block plugging.
But, with this patch, f2fs itself merges read bios first and then submits a
large bio, which can reduce the bio handling overheads.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
For better read performance, we add a new function to support for merging
contiguous read as the one for write.
v1-->v2:
o add declarations here as Gu Zheng suggested.
o use new structure f2fs_bio_info introduced by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Acked-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Simplify write_orphan_inodes for better readable. Because we hold the
orphan_inode_mutex, so it's safe to use list_for_each_entry instead of
list_for_each_safe.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs has three bio types, NODE, DATA, and META, and manages some data
structures per each bio types.
The codes are a little bit messy, thus, this patch introduces a bio array
which groups individual data structures as follows.
struct f2fs_bio_info {
struct bio *bio; /* bios to merge */
sector_t last_block_in_bio; /* last block number */
struct mutex io_mutex; /* mutex for bio */
};
struct f2fs_sb_info {
...
struct f2fs_bio_info write_io[NR_PAGE_TYPE]; /* for write bios */
...
};
The code changes from this new data structure are trivial.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs manages an extent cache to search a number of consecutive data blocks
very quickly.
However it conducts unnecessary cache operations if the file is highly
fragmented with no valid extent cache.
In such the case, we don't need to handle the extent cache, but just can disable
the cache facility.
Nevertheless, this patch gives one more chance to enable the extent cache.
For example,
1. create a file
2. write data sequentially which produces a large valid extent cache
3. update some data, resulting in a fragmented extent
4. if the fragmented extent is too small, then drop extent cache
5. close the file
6. open the file again
7. give another chance to make a new extent cache
8. write data sequentially again which creates another big extent cache.
...
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch removes an unnecessary semaphore (i.e., sbi->bio_sem).
There is no reason to use the semaphore when f2fs submits read and write IOs.
Instead, let's use a write mutex and cover the sbi->bio[] by the lock.
Change log from v1:
o split write_mutex suggested by Chao Yu
Chao described,
"All DATA/NODE/META bio buffers in superblock is protected by
'sbi->write_mutex', but each bio buffer area is independent, So we
should split write_mutex to three for DATA/NODE/META."
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should use f2fs_put_page to release page for uniform style of f2fs code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o fix 32bit drops reported by Dan Carpenter
This patch adds f2fs_issue_discard() to clean up blkdev_issue_discard() flows.
Dan carpenter reported:
"block_t is a 32 bit type and sector_t is a 64 bit type. The upper 32
bits of the sector_t are not used because the shift will wrap."
Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If frequent small discards are issued to the device, the performance would
be degraded significantly.
So, this patch adds a sysfs entry to control the number of discards to be
issued during a checkpoint procedure.
By default, f2fs does not issue any small discards, which means max_discards
is zero.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds key functions to activate the small discard feature.
Note that this procedure is conducted during the checkpoint only.
In flush_sit_entries(), when a new dirty sit entry is flushed, f2fs calls
add_discard_addrs() which searches candidates to be discarded.
The candidates should be marked *invalidated* and also previous checkpoint
recognizes it as *valid*.
At the end of a checkpoint procedure, f2fs throws discards based on the
discard entry list.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a slab cache entry for small discards.
Each entry consists of:
struct discard_entry {
struct list_head list; /* list head */
block_t blkaddr; /* block address to be discarded */
int len; /* # of consecutive blocks of the discard */
};
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
To find a zero bit using the result of OR operation between ckpt_valid_map
and cur_valid_map is more fast than find a zero bit in each bitmap.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: adjust changed function name]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When f2fs_set_bit is used, in a byte MSB and LSB is reversed,
in that case we can use __find_rev_next_bit or __find_rev_next_zero_bit.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: change the function names]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
With immutable biovecs we don't want code accessing bi_io_vec directly -
the uses this patch changes weren't incorrect since they all own the
bio, but it makes the code harder to audit for no good reason - also,
this will help with multipage bvecs later.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
o Changes from v1
Use find_next(_zero)_bit suggested by jg.kim
When f2fs issues discard command, if segment is contiguous,
let's issue more large segment to gather adjacent segments.
** blktrace **
179,1 0 5859 42.619023770 971 C D 131072 + 2097152 [0]
179,1 0 33665 108.840475468 971 C D 2228224 + 2494464 [0]
179,1 0 33671 109.131616427 971 C D 14909440 + 344064 [0]
179,1 0 33677 109.137100677 971 C D 15261696 + 4096 [0]
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If we failed to init&add kobject when fill_super, stats info and proc object of
f2fs will not be released.
We should free them before we finish fill_super.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
use genernal method supported by kernel
o changes from v1
If any waiter exists at end io, wake up it.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
A NULL point should avoid to be used in destroy_segment_manager after allocating
memory fail for f2fs_sm_info.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In wait_on_node_pages_writeback we will test and clear error flag for all
pages in radix tree, but not necessary.
So we only do this for pages belong to the specified inode.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs_sync_file() waits for all the node blocks to be written.
But, we don't need to do that, but wait only the inode-related node blocks.
This patch adds wait_on_node_pages_writeback() in which waits inode-related
node blocks that are on writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, check_block_count check valid_map with bit data type in common
scenario that sit has all ones or zeros bitmap, it makes low mount performance.
So let's check the special bitmap with integer data type instead of the bit one.
v1-->v2:
o use find_next_{zero_}bit_le for better performance and readable as Jaegeuk
suggested.
o use neat logogram in comment as Gu Zheng suggested.
o search continuous ones or zeros for better performance when checking mixed
bitmap.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Shu Tan <shu.tan@samsung.com>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
npages_for_summary_flush uses (SUMMARY_SIZE + 1) as the size of a f2fs_summary
while its actual size is SUMMARY_SIZE. So the result sometimes is bigger than
actual number by one, which causes checkpoint can't be written into disk
contiguously, and sometimes summary blocks can't be compacted like they should.
Besides, when writing summary blocks into pages, if remain space in a page
isn't big enough for one f2fs_summary, it will be left unused, current code
seems not to take it into account.
Signed-off-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
During xattr updating, free size should be corrected to remainder free size
+ old entry size.
It can avoid ENOSPC error when we update old entry with the same size new
entry at fully filled xattr.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If you want to remove unnecessary BUG_ONs, you can just turn off F2FS_CHECK_FS
in your kernel config.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This config will support an option to remove so many BUG_ONs that degrade
the performance potentially.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The deadlock is found through the following scenario.
sys_mkdir()
-> f2fs_add_link()
-> __f2fs_add_link()
-> init_inode_metadata()
: lock_page(inode);
-> f2fs_init_acl()
-> f2fs_set_acl()
-> f2fs_setxattr(..., NULL)
: This NULL page incurs a deadlock at update_inode_page().
So, likewise f2fs_init_security(), this patch adds a parameter to transfer the
locked inode page to f2fs_setxattr().
Found by Linux File System Verification project (linuxtesting.org).
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Only one dirty type is set in __locate_dirty_segment and we can know
dirty type of segment. So we don't need to check other dirty types.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, set_page_dirty is called every time after writting one summary info
into compacted summary page,
To avoid redundant set_page_dirty, we only call set_page_dirty before release
page.
Signed-off-by: Yu Chao <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a control method in sysfs to reclaim prefree segments.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch merges some background jobs into this new function.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs postpones reclaiming prefree segments into free segments
as much as possible.
However, if user writes and deletes a bunch of data without any sync or fsync
calls, some flash storages can suffer from garbage collections.
So, this patch adds the reclaiming codes to f2fs_write_node_pages and background
GC thread.
If there are a lot of prefree segments, let's do checkpoint so that f2fs
submits discard commands for the prefree regions to the flash storage.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce the unfailed version of kmem_cache_alloc named f2fs_kmem_cache_alloc
to hide the retry routine and make the code a bit cleaner.
v2:
Fix the wrong use of 'retry' tag pointed out by Gao feng.
Use more neat code to remove redundant tag suggested by Haicheng Li.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Because one dirty seg can only be mapped to one dirty_type. Otherwise, it's a bug.
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
[Jaegeuk Kim: modify a comment related to this patch]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enhances the recovery routine not to write any data/node/meta until
its completion.
If any writes are sent to the disk, it could contaminate the written history
that will be used for further recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, do_checkpoint() will call congestion_wait() for waiting the pages
(previous submitted node/meta/data pages) to be written back.
Because congestion_wait() will set a regular period (e.g. HZ / 50 ) for waiting, and
no additional wake up mechanism was introduced if IO ends up before regular period costed.
Yuan Zhong found there is a situation that after the pages have been written back,
but the checkpoint thread still wait for congestion_wait to exit.
So here we store checkpoint task into f2fs_sb when doing checkpoint, it'll wait for IO completes
if there's IO going on, and in the end IO path, wake up checkpoint task when IO ends up.
Thanks to Yuan Zhong's pre work about this problem.
Reported-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce function read_raw_super_block() to hide reading raw super block and
the retry routine if the first sb is invalid.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch removes the logic previously introduced to address the starvation
on cp_rwsem.
One potential there-in bug is that we should cover the wait.list with spin_lock,
but the previous code broke this rule.
And, actually current rwsem handles this starvation issue reasonably, so that we
didn't need to do this before neither.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, there was a erroneous scenario like below.
thread 1: thread 2:
f2fs_unlink
- acquire_orphan_inode
: sbi->n_orphans++ write_checkpoint
- block_operations
: f2fs_lock_all
- do_checkpoint
: write orphan blocks with sbi->n_orphans
- unblock_operations
- f2fs_lock_op
- release_orphan_inode
- f2fs_unlock_op
During the checkpoint by thread 2, f2fs stores a wrong orphan block according
to the wrong sbi->n_orphans.
To avoid this, simply we should make cover acquire_orphan_inode too with
f2fs_lock_op.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
During the f2fs_put_super procedure, we don't need to conduct checkpoint all
the time, since we don't need to do that if superblock is clean.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The current f2fs code errors if the xattr or acl options are passed when
remounting. This is important in a typical scenario where f2fs is mounted
as a "ro" root file-system by the boot loader and then the init process wants
to remount it "rw" with the "remount,rw" option.
Signed-off-by: Kelly Anderson <kelly@xilka.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The fs_locks is used to block other ops(ex, recovery) when doing checkpoint.
And each other operate routine(besides checkpoint) needs to acquire a fs_lock,
there is a terrible problem here, if these are too many concurrency threads acquiring
fs_lock, so that they will block each other and may lead to some performance problem,
but this is not the phenomenon we want to see.
Though there are some optimization patches introduced to enhance the usage of fs_lock,
but the thorough solution is using a *rw_sem* to replace the fs_lock.
Checkpoint routine takes write_sem, and other ops take read_sem, so that we can block
other ops(ex, recovery) when doing checkpoint, and other ops will not disturb each other,
this can avoid the problem described above completely.
Because of the weakness of rw_sem, the above change may introduce a potential problem
that the checkpoint thread might get starved if other threads are intensively locking
the read semaphore for I/O.(Pointed out by Xu Jin)
In order to avoid this, a wait_list is introduced, the appending read semaphore ops
will be dropped into the wait_list if checkpoint thread is waiting for write semaphore,
and will be waked up when checkpoint thread gives up write semaphore.
Thanks to Kim's previous review and test, and will be very glad to see other guys'
performance tests about this patch.
V2:
-fix the potential starvation problem.
-use more suitable func name suggested by Xu Jin.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: adjust minor coding standard]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
During recovery, orphan inodes are deleted via truncate_hole().
These orphans are added by recover_dentry() via f2fs_delete_entry().
However, f2fs_delete_entry() adds them via add_orphan_inode()
without calling acquire_orphan_inode() first. This prevents the
counters from being incremented properly, which causes them to
underflow when remove_orphan_inode() is called later on.
Signed-off-by: Russ Knize <rknize@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
f2fs_initxattrs() is called internally from within F2FS and should
not call functions that are used by VFS handlers. This avoids
certain deadlocks:
- vfs_create()
- f2fs_create() <-- takes an fs_lock
- f2fs_add_link()
- __f2fs_add_link()
- init_inode_metadata()
- f2fs_init_security()
- security_inode_init_security()
- f2fs_initxattrs()
- f2fs_setxattr() <-- also takes an fs_lock
If the caller happens to grab the same fs_lock from the pool in both
places, they will deadlock. There are also deadlocks involving
multiple threads and mutexes:
- f2fs_write_begin()
- f2fs_balance_fs() <-- takes gc_mutex
- f2fs_gc()
- write_checkpoint()
- block_operations()
- mutex_lock_all() <-- blocks trying to grab all fs_locks
- f2fs_mkdir() <-- takes an fs_lock
- __f2fs_add_link()
- f2fs_init_security()
- security_inode_init_security()
- f2fs_initxattrs()
- f2fs_setxattr()
- f2fs_balance_fs() <-- blocks trying to take gc_mutex
Signed-off-by: Russ Knize <Russ.Knize@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Accounting errors from buggy code calling the acquire/release/remove
orphan inode interfaces can cause n_orphans to underflow, which will
then cause acquire_orphan_inode() to return -ENOSPC on the next
operation. This commit guards against that condition.
Signed-off-by: Russ Knize <rknize@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, recover_fsync_data still to write checkpoint when there is
nothing to recover with normal umount image.
It may reduce mount performance and flash memory lifetime, so let's remove
it.
Signed-off-by: Tan Shu <shu.tan@samsung.com>
Signed-off-by: Yu Chao <chao2.yu@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch add macro MAX_BIO_BLOCKS to limit value of npages in
f2fs_bio_alloc, it can avoid allocating failure in bio_alloc caused by
npages is larger than BIO_MAX_PAGES.
Signed-off-by: Yu Chao <chao2.yu@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Since the MAX_VICTIM_SEARCH has been enlarged from 20 to 4096,
the victim searching overhead will be increased much than before,
especially for SSR that searches victim for use quiet often.
This patch intends to reduce the overhead a little bit by:
- make the get_gc_cost a inline routine to reduce function call
overhead
- reduce multiplication and division operations
- reduce unnecessary comparison operation
Signed-off-by: Jin Xu <jinuxstyle@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
There is a performance problem: when all sbi->fs_lock are holded, then
all the following threads may get the same next_lock value from sbi->next_lock_num
in function mutex_lock_op, and wait for the same lock(fs_lock[next_lock]),
it may cause performance reduce.
So we move the sbi->next_lock_num++ before getting lock, this will average the
following threads if all sbi->fs_lock are holded.
v1-->v2:
Drop the needless spin_lock as Jaegeuk suggested.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Yu Chao <chao2.yu@samsung.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch improves the gc efficiency by optimizing the victim
selection policy. With this optimization, the random re-write
performance could increase up to 20%.
For f2fs, when disk is in shortage of free spaces, gc will selects
dirty segments and moves valid blocks around for making more space
available. The gc cost of a segment is determined by the valid blocks
in the segment. The less the valid blocks, the higher the efficiency.
The ideal victim segment is the one that has the most garbage blocks.
Currently, it searches up to 20 dirty segments for a victim segment.
The selected victim is not likely the best victim for gc when there
are much more dirty segments. Why not searching more dirty segments
for a better victim? The cost of searching dirty segments is
negligible in comparison to moving blocks.
In this patch, it enlarges the MAX_VICTIM_SEARCH to 4096 to make
the search more aggressively for a possible better victim. Since
it also applies to victim selection for SSR, it will likely improve
the SSR efficiency as well.
The test case is simple. It creates as many files until the disk full.
The size for each file is 32KB. Then it writes as many as 100000
records of 4KB size to random offsets of random files in sync mode.
The testing was done on a 2GB partition of a SDHC card. Let's see the
test result of f2fs without and with the patch.
---------------------------------------
2GB partition, SDHC
create 52023 files of size 32768 bytes
random re-write 100000 records of 4KB
---------------------------------------
| file creation (s) | rewrite time (s) | gc count | gc garbage blocks |
[no patch] 341 4227 1174 174840
[patched] 324 2958 645 106682
It's obvious that, with the patch, f2fs finishes the test in 20+% less
time than without the patch. And internally it does much less gc with
higher efficiency than before.
Since the performance improvement is related to gc, it might not be so
obvious for other tests that do not trigger gc as often as this one (
This is because f2fs selects dirty segments for SSR use most of the
time when free space is in shortage). The well-known iozone test tool
was not used for benchmarking the patch becuase it seems do not have
a test case that performs random re-write on a full disk.
This patch is the revised version based on the suggestion from
Jaegeuk Kim.
Signed-off-by: Jin Xu <jinuxstyle@gmail.com>
[Jaegeuk Kim: suggested simpler solution]
Reviewed-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, we experience bio traces as follows when running simple sequential
write test.
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500104928, size = 4K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 499922208, size = 368K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 499914752, size = 140K
-> total 512K
The first one is to write an indirect node block, and the others are to write
direct node blocks.
The reason why there are two separate bios for direct node blocks is:
0. initial state
------------------ ------------------
| | |xxxxxxxx |
------------------ ------------------
1. write 368K
------------------ ------------------
| | |xxxxxxxxWWWWWWWW|
------------------ ------------------
2. write 140K
------------------ ------------------
|WWWWWWW | |xxxxxxxxWWWWWWWW|
------------------ ------------------
This is because f2fs_write_node_pages tries to write just 512K totally, so that
we can lose the chance to merge more bios nicely.
After this patch is applied, we can get the following bio traces.
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500103168, size = 8K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500111368, size = 4K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500107272, size = 512K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500108296, size = 512K
f2fs_do_submit_bio: type = NODE, io = no sync, sector = 500109320, size = 500K
And finally, we can improve the sequential write performance,
from 458.775 MB/s to 479.945 MB/s on SSD.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The current f2fs uses all the block counts with 32 bit numbers, which is able to
cover about 15TB volume.
But in calculation of utilization, f2fs multiplies the count by 100 which can
induce overflow.
This patch fixes this.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs conducts SSR when free_sections() < overprovision_sections.
But, even though there are a lot of prefree segments, it can consider SSR only.
So, let's consider the number of prefree segments too for triggering SSR.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The f2fs_set_link updates its parent inode number, so we should sync this to
the inode block.
Otherwise, the data can be lost after sudden-power-off.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
0. modified inode structure
--------------------------------------
metadata (e.g., i_mtime, i_ctime, etc)
--------------------------------------
direct pointers [0 ~ 873]
inline xattrs (200 bytes by default)
indirect pointers [0 ~ 4]
--------------------------------------
node footer
--------------------------------------
1. setxattr flow
- read_all_xattrs copies all the xattrs from inline and xattr node block.
- handle xattr entries
- write_all_xattrs copies modified xattrs into inline and xattr node block.
2. getxattr flow
- read_all_xattrs copies all the xattrs from inline and xattr node block.
- check target entries
3. Usage
# mount -t f2fs -o inline_xattr $DEV $MNT
Once mounted with the inline_xattr option, f2fs marks all the newly created
files to reserve an amount of inline xattr space explicitly inside the inode
block. Without the mount option, f2fs will not touch any existing files and
newly created files as well.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The __find_xattr is to search the wanted xattr entry starting from the
base_addr.
If not found, the returned entry is the last empty xattr entry that can be
allocated newly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch enables the number of direct pointers inside on-disk inode block to
be changed dynamically according to the size of inline xattr space.
The number of direct pointers, ADDRS_PER_INODE, can be changed only if the file
has inline xattr flag.
The number of direct pointers that will be used by inline xattrs is defined as
F2FS_INLINE_XATTR_ADDRS.
Current patch assigns F2FS_INLINE_XATTR_ADDRS to 0 temporarily.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds basic inode flags for inline xattrs, F2FS_INLINE_XATTR,
and add a mount option, inline_xattr, which is enabled when xattr is set.
If the mount option is enabled, all the files are marked with the inline_xattrs
flag.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Fix to return -ENOMEM in the kset create and add error handling
case instead of 0, as done elsewhere in this function.
Introduced by commit b59d0bae6c.
(f2fs: add sysfs support for controlling the gc_thread)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Namjae Jeon <namjae.jeon@samsung.com>
[Jaegeuk Kim: merge the patch with previous modification]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch removes a false-alaramed BUG_ON.
The previous BUG_ON condition didn't cover the following true scenario.
In f2fs_add_link, 1) get_new_data_page gives an uptodate page successfully,
and then, 2) init_inode_metadata returns -ENOSPC.
At this moment, a new clean data page is remained in the page cache, but its
block address still indicates NEW_ADDR.
After then, even if sync is called, this clean data page cannot be written to
the disk due to the clean state.
So this means that get_lock_data_page should make a new empty page when its
block address is NEW_ADDR and its page is not uptodated.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
When any of the caches create fails in init_f2fs_fs(), the other caches which are
create successful should be free.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
An error "label at end of compound statement" will occur if CONFIG_F2FS_STAT_FS
disabled.
fs/f2fs/segment.c:556:1: error: label at end of compound statement
So clean up the 'out' label to fix it.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In f2fs_write_inode, updating inode after f2fs_balance_fs is not
a optimized way in the case that f2fs_gc is performed ahead. The
inode page will be unnecessarily written out twice, one of which
is in f2fs_gc->...->sync_node_pages and the other is in
update_inode_page.
Let's update the inode page in prior to f2fs_balance_fs to avoid
this.
To reproduce it,
$ touch file (before this step, should make the device need f2fs_gc)
$ sync (or wait the bdi to write dirty inode)
Signed-off-by: Jin Xu <jinuxstyle@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
alloc_page() returns a NULL on failure, it never returns an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously, f2fs_setxattr assigns i_xattr_nid in the inode page inconsistently.
The scenario is:
= Thread 1 = = Thread 2 = = fi->i_xattr_nid = = on-disk nid =
f2fs_setxattr 0 0
new_node_page X 0
sync_inode_page X X
checkpoint X X -.
grab_cache_page X X |
--> allocate a new xattr node block or -ENOSPC <----------------'
At this moment, the checkpoint stores inconsistent data where the inode has
i_xattr_nid but actual xattr node block is not allocated yet.
So, we should assign the real i_xattr_nid only after its xattr node block is
allocated.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previously xattr node blocks are stored to the COLD_NODE log, which means that
our roll-forward mechanism doesn't recover the xattr node blocks at all.
Only the direct node blocks in the WARM_NODE log can be recovered.
So, let's resolve the issue simply by conducting checkpoint during fsync when a
file has a modified xattr node block.
This approach is able to degrade the performance, but normally the checkpoint
overhead is shown at the initial fsync call after the xattr entry changes.
Once the checkpoint is done, no additional overhead would be occurred.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch fixes the use of XATTR_NODE_OFFSET.
o The offset should not use several MSB bits which are used by marking node
blocks.
o IS_DNODE should handle XATTR_NODE_OFFSET to avoid potential abnormality
during the fsync call.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch should resolve the following error reported by kbuild test robot.
All error/warnings:
In file included from fs/f2fs/dir.c:13:0:
>> fs/f2fs/f2fs.h:435:17: error: field 's_kobj' has incomplete type
struct kobject s_kobj;
The failure was caused by missing the kobject header file in dir.c.
So, this patch move the header file to the right location, f2fs.h.
CC: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch fixes a deadlock bug that occurs quite often when there are
concurrent write and fsync on a same file.
Following is the simplified call trace when tasks get hung.
fsync thread:
- f2fs_sync_file
...
- f2fs_write_data_pages
...
- update_extent_cache
...
- update_inode
- wait_on_page_writeback
bdi writeback thread
- __writeback_single_inode
- f2fs_write_data_pages
- mutex_lock(sbi->writepages)
The deadlock happens when the fsync thread waits on a inode page that has
been added to the f2fs' cached bio sbi->bio[NODE], and unfortunately,
no one else could be able to submit the cached bio to block layer for
writeback. This is because the fsync thread already hold a sbi->fs_lock and
the sbi->writepages lock, causing the bdi thread being blocked when attempt
to write data pages for the same inode. At the same time, f2fs_gc thread
does not notice the situation and could not help. Even the sync syscall
gets blocked.
To fix it, we could submit the cached bio first before waiting on a inode page
that is being written back.
Signed-off-by: Jin Xu <jinuxstyle@gmail.com>
[Jaegeuk Kim: add more cases to use f2fs_wait_on_page_writeback]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This code is being used for nobh_write_end() function.
But since now f2fs_write_end function is added so
there is no need for this code.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add sysfs entry gc_idle to control the gc policy. Where
gc_idle = 1 corresponds to selecting a cost benefit approach,
while gc_idle = 2 corresponds to selecting a greedy approach
to garbage collection. The selection is mutually exclusive one
approach will work at any point. If gc_idle = 0, then this
option is disabled.
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: change the select_gc_type() flow slightly]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add sysfs entries to control the timing parameters for
f2fs gc thread.
Various Sysfs options introduced are:
gc_min_sleep_time: Min Sleep time for GC in ms
gc_max_sleep_time: Max Sleep time for GC in ms
gc_no_gc_sleep_time: Default Sleep time for GC in ms
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: fix an umount bug and some minor changes]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This kfree() is no longer needed after a79dc083d7 "f2fs: move
bio_private allocation out of f2fs_bio_alloc()". The "bio->bi_private"
is NULL here so it's a no-op.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch fixes mishandling of the sbi->n_orphans variable.
If users request lots of f2fs_unlink(), check_orphan_space() could be contended.
In such the case, sbi->n_orphans can be read incorrectly so that f2fs_unlink()
would fall into the wrong state which results in the failure of
add_orphan_inode().
So, let's increment sbi->n_orphans virtually prior to the actual orphan inode
stuffs. After that, let's release sbi->n_orphans by calling release_orphan_inode
or remove_orphan_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
bio->bi_private is not always needed. As in the reading data path,
end_read_io does not need bio_private for further using, so moving
bio_private allocation out of f2fs_bio_alloc(). Alloc it in the
submit_write_page(), and ignore it in the f2fs_readpage().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As we remove the target single node, so list_for_each is enought, in order to
clean up, we use list_for_each_entry instead.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
For string without format specifiers, using seq_puts()/seq_putc()
instead of seq_printf().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
As similar as the i_pino fix, i_name also should be fixed when i_nlink is 1.
The errorneous scenario is like this.
1. touch test1
2. link test1 test2
3. unlink test2
4. fsync test1
After this, i_name should be test1.
CC: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The error is reproducible by:
0. mkfs.f2fs /dev/sdb1 & mount
1. touch test1
2. touch test2
3. mv test1 test2
4. umount
5. dumpt.f2fs -i 4 /dev/sdb1
After this, when we retrieve the inode->i_name of test2 by dump.f2fs, we get
test1 instead of test2.
This is because f2fs didn't update the file name during the f2fs_rename.
So, this patch fixes that.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Introduce help function F2FS_NODE() to simplify the conversion of node_page to
f2fs_node.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Add a help func F2FS_STAT() to get the f2fs_stat_info.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In order to support SQLite that uses fdatasync instead of fsync, we should
guarantee the data requested by fdatasync can be recovered after sudden-power-
off.
So, let's remove the fdatasync condition in f2fs_sync_file.
Otherwise, we can restore the data after sudden-power-off due to nonexistence
of any fsync mark'ed node blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
In the previous Al Viro's readdir patch set, there occurs a bug when
running
xfstest: 006 as follows.
[Error output]
alpha size = 4, name length = 6, total files = 4096, nproc=1
1023 files created
rm: cannot remove `/mnt/f2fs/permname.15150/a': Directory not empty
[Correct output]
alpha size = 4, name length = 6, total files = 4096, nproc=1
4097 files created
This bug is due to the misupdate of directory position in ctx.
So, this patch fixes this.
[AV: fixed a braino]
CC: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
o remount_fs callback function
o restore parent inode number to enhance the fsync performance
o xattr security labels
o reduce the number of redundant lock/unlock data pages
o avoid frequent write_inode calls
The other minor bug fixes are as follows.
o endian conversion bugs
o various bugs in the roll-forward recovery routine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qFcy
-----END PGP SIGNATURE-----
Merge tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This patch-set includes the following major enhancement patches:
- remount_fs callback function
- restore parent inode number to enhance the fsync performance
- xattr security labels
- reduce the number of redundant lock/unlock data pages
- avoid frequent write_inode calls
The other minor bug fixes are as follows.
- endian conversion bugs
- various bugs in the roll-forward recovery routine"
* tag 'for-f2fs-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (56 commits)
f2fs: fix to recover i_size from roll-forward
f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()
f2fs: remove reusing any prefree segments
f2fs: code cleanup and simplify in func {find/add}_gc_inode
f2fs: optimize the init_dirty_segmap function
f2fs: fix an endian conversion bug detected by sparse
f2fs: fix crc endian conversion
f2fs: add remount_fs callback support
f2fs: recover wrong pino after checkpoint during fsync
f2fs: optimize do_write_data_page()
f2fs: make locate_dirty_segment() as static
f2fs: remove unnecessary parameter "offset" from __add_sum_entry()
f2fs: avoid freqeunt write_inode calls
f2fs: optimise the truncate_data_blocks_range() range
f2fs: use the F2FS specific flags in f2fs_ioctl()
f2fs: sync dir->i_size with its block allocation
f2fs: fix i_blocks translation on various types of files
f2fs: set sb->s_fs_info before calling parse_options()
f2fs: support xattr security labels
f2fs: fix iget/iput of dir during recovery
...
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
If user requests many data writes and fsync together, the last updated i_size
should be stored to the inode block consistently.
But, previous write_end just marks the inode as dirty and doesn't update its
metadata into its inode block.
After that, fsync just writes the inode block with newly updated data index
excluding inode metadata updates.
So, this patch introduces write_end in which updates inode block too when the
i_size is changed.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Gu Zheng