F2FS have dirty page count control for batched sequential
write in writepages, and get the value of min_seq_blocks by
blocks_per_seg * segs_per_sec(segs_per_sec defaults to 1).
But in some scenes we set a lager section size, Min_seq_blocks
will become too large to achieve the expected effect(eg. 4thread
sequential write, the number of merge requests will be reduced).
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
SBI_NEED_FSCK is an indicator that fsck.f2fs needs to be triggered, so it
is not fully critical to stop any IO writes. So, let's allow to write data
instead of reporting EIO forever given SBI_NEED_FSCK, but do keep OPU.
Fixes: 9557727876 ("f2fs: drop inplace IO if fs status is abnormal")
Cc: <stable@kernel.org> # v5.13+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to migrate swapfile in aligned write mode during
swapon in order to keep swapfile being aligned to section as much as
possible, then pinned swapfile will locates fully filled section which
may not affected by GC.
However, for the case that swapfile's size is not aligned to section
size, it will still leave last extent in file's tail as unaligned due
to its size is smaller than section size, like case #2.
case #1
xfs_io -f /mnt/f2fs/file -c "pwrite 0 4M" -c "fsync"
Before swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3047]: 1123352..1126399 3048 0x1000
1: [3048..7143]: 237568..241663 4096 0x1000
2: [7144..8191]: 245760..246807 1048 0x1001
After swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..8191]: 249856..258047 8192 0x1001
Kmsg:
F2FS-fs (zram0): Swapfile (2) is not align to section:
1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n)
case #2
xfs_io -f /mnt/f2fs/file -c "pwrite 0 3M" -c "fsync"
Before swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..3047]: 246808..249855 3048 0x1000
1: [3048..6143]: 237568..240663 3096 0x1001
After swapon:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 258048..262143 4096 0x1000
1: [4096..6143]: 238616..240663 2048 0x1001
Kmsg:
F2FS-fs (zram0): Swapfile: last extent is not aligned to section
F2FS-fs (zram0): Swapfile (2) is not align to section:
1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * n)
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Support to use address space of inner inode to cache compressed block,
in order to improve cache hit ratio of random read.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Given RO feature in superblock, we don't need to check provisioning/reserve
spaces and SSA area.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Update the logging uses that have unnecessary newlines as the f2fs_printk
function and so its f2fs_<level> macro callers already adds one.
This allows searching single line logging entries with an easier grep and
also avoids unnecessary blank lines in the logging.
Miscellanea:
o Coalesce formats
o Align to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Restruct f2fs page private layout for below reasons:
There are some cases that f2fs wants to set a flag in a page to
indicate a specified status of page:
a) page is in transaction list for atomic write
b) page contains dummy data for aligned write
c) page is migrating for GC
d) page contains inline data for inline inode flush
e) page belongs to merkle tree, and is verified for fsverity
f) page is dirty and has filesystem/inode reference count for writeback
g) page is temporary and has decompress io context reference for compression
There are existed places in page structure we can use to store
f2fs private status/data:
- page.flags: PG_checked, PG_private
- page.private
However it was a mess when we using them, which may cause potential
confliction:
page.private PG_private PG_checked page._refcount (+1 at most)
a) -1 set +1
b) -2 set
c), d), e) set
f) 0 set +1
g) pointer set
The other problem is page.flags has no free slot, if we can avoid set
zero to page.private and set PG_private flag, then we use non-zero value
to indicate PG_private status, so that we may have chance to reclaim
PG_private slot for other usage. [1]
The other concern is f2fs has bad scalability in aspect of indicating
more page status.
So in this patch, let's restructure f2fs' page.private as below to
solve above issues:
Layout A: lowest bit should be 1
| bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... |
bit 0 PAGE_PRIVATE_NOT_POINTER
bit 1 PAGE_PRIVATE_ATOMIC_WRITE
bit 2 PAGE_PRIVATE_DUMMY_WRITE
bit 3 PAGE_PRIVATE_ONGOING_MIGRATION
bit 4 PAGE_PRIVATE_INLINE_INODE
bit 5 PAGE_PRIVATE_REF_RESOURCE
bit 6- f2fs private data
Layout B: lowest bit should be 0
page.private is a wrapped pointer.
After the change:
page.private PG_private PG_checked page._refcount (+1 at most)
a) 11 set +1
b) 101 set +1
c) 1001 set +1
d) 10001 set +1
e) set
f) 100001 set +1
g) pointer set +1
[1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we added a new mount option, "checkpoint_merge", which introduces
a kernel thread dealing with the f2fs checkpoints. Once we start to manage the
IO priority along with blk-cgroup, the checkpoint operation can be processed in
a lower priority under the process context. Since the checkpoint holds all the
filesystem operations, we give a higher priority to the checkpoint thread all
the time.
Enhancement:
- introduce gc_merge mount option to introduce a checkpoint thread
- improve to run discard thread efficiently
- allow modular compression algorithms
- expose # of overprivision segments to sysfs
- expose runtime compression stat to sysfs
Bug fix:
- fix OOB memory access by the node id lookup
- avoid touching checkpointed data in the checkpoint-disabled mode
- fix the resizing flow to avoid kernel panic and race conditions
- fix block allocation issues on pinned files
- address some swapfile issues
- fix hugtask problem and kernel panic during atomic write operations
- don't start checkpoint thread in RO
And, we've cleaned up some kernel coding style and build warnings. In addition,
we fixed some minor race conditions and error handling routines.
-----BEGIN PGP SIGNATURE-----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=P5uk
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we added a new mount option, "checkpoint_merge", which
introduces a kernel thread dealing with the f2fs checkpoints. Once we
start to manage the IO priority along with blk-cgroup, the checkpoint
operation can be processed in a lower priority under the process
context. Since the checkpoint holds all the filesystem operations, we
give a higher priority to the checkpoint thread all the time.
Enhancements:
- introduce gc_merge mount option to introduce a checkpoint thread
- improve to run discard thread efficiently
- allow modular compression algorithms
- expose # of overprivision segments to sysfs
- expose runtime compression stat to sysfs
Bug fixes:
- fix OOB memory access by the node id lookup
- avoid touching checkpointed data in the checkpoint-disabled mode
- fix the resizing flow to avoid kernel panic and race conditions
- fix block allocation issues on pinned files
- address some swapfile issues
- fix hugtask problem and kernel panic during atomic write operations
- don't start checkpoint thread in RO
And, we've cleaned up some kernel coding style and build warnings. In
addition, we fixed some minor race conditions and error handling
routines"
* tag 'f2fs-for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (48 commits)
f2fs: drop inplace IO if fs status is abnormal
f2fs: compress: remove unneed check condition
f2fs: clean up left deprecated IO trace codes
f2fs: avoid using native allocate_segment_by_default()
f2fs: remove unnecessary struct declaration
f2fs: fix to avoid NULL pointer dereference
f2fs: avoid duplicated codes for cleanup
f2fs: document: add description about compressed space handling
f2fs: clean up build warnings
f2fs: fix the periodic wakeups of discard thread
f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
f2fs: fix to avoid GC/mmap race with f2fs_truncate()
f2fs: set checkpoint_merge by default
f2fs: Fix a hungtask problem in atomic write
f2fs: fix to restrict mount condition on readonly block device
f2fs: introduce gc_merge mount option
f2fs: fix to cover __allocate_new_section() with curseg_lock
f2fs: fix wrong alloc_type in f2fs_do_replace_block
f2fs: delete empty compress.h
f2fs: fix a typo in inode.c
...
If filesystem has cp_error or need_fsck status, let's drop inplace IO
to avoid further corruption of fs data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As we did for other cases, in fix_curseg_write_pointer(), let's
use wrapped f2fs_allocate_new_section() instead of native
allocate_segment_by_default(), by this way, it fixes to cover
segment allocation with curseg_lock and sentry_lock.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : f2fs_put_page+0x1c/0x26c
lr : __revoke_inmem_pages+0x544/0x75c
f2fs_put_page+0x1c/0x26c
__revoke_inmem_pages+0x544/0x75c
__f2fs_commit_inmem_pages+0x364/0x3c0
f2fs_commit_inmem_pages+0xc8/0x1a0
f2fs_ioc_commit_atomic_write+0xa4/0x15c
f2fs_ioctl+0x5b0/0x1574
file_ioctl+0x154/0x320
do_vfs_ioctl+0x164/0x740
__arm64_sys_ioctl+0x78/0xa4
el0_svc_common+0xbc/0x1d0
el0_svc_handler+0x74/0x98
el0_svc+0x8/0xc
In f2fs_put_page, we access page->mapping is NULL.
The root cause is:
In some cases, the page refcount and ATOMIC_WRITTEN_PAGE
flag miss set for page-priavte flag has been set.
We add f2fs_bug_on like this:
f2fs_register_inmem_page()
{
...
f2fs_set_page_private(page, ATOMIC_WRITTEN_PAGE);
f2fs_bug_on(F2FS_I_SB(inode), !IS_ATOMIC_WRITTEN_PAGE(page));
...
}
The bug on stack follow link this:
PC is at f2fs_register_inmem_page+0x238/0x2b4
LR is at f2fs_register_inmem_page+0x2a8/0x2b4
f2fs_register_inmem_page+0x238/0x2b4
f2fs_set_data_page_dirty+0x104/0x164
set_page_dirty+0x78/0xc8
f2fs_write_end+0x1b4/0x444
generic_perform_write+0x144/0x1cc
__generic_file_write_iter+0xc4/0x174
f2fs_file_write_iter+0x2c0/0x350
__vfs_write+0x104/0x134
vfs_write+0xe8/0x19c
SyS_pwrite64+0x78/0xb8
To fix this issue, let's add page refcount add page-priavte flag.
The page-private flag is not cleared and needs further analysis.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Signed-off-by: Dehe Gu <gudehe@huawei.com>
Signed-off-by: Yi Chen <chenyi77@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_segment_has_free_slot() was copied and modified from
__next_free_blkoff(), they are almost the same, clean up to
reuse common code as much as possible.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch combined the below three clean-up patches.
- modify open brace '{' following function definitions
- ERROR: spaces required around that ':'
- ERROR: spaces required before the open parenthesis '('
- ERROR: spaces prohibited before that ','
- Made suggested modifications from checkpatch in reference to WARNING:
Missing a blank line after declarations
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix the unnecessary periodic wakeups of discard thread that happens under
below two conditions -
1. When f2fs is heavily utilized over 80%, the current discard policy
sets the max sleep timeout of discard thread as 50ms
(DEF_MIN_DISCARD_ISSUE_TIME). But this is set even when there are
no pending discard commands to be issued.
2. In the issue_discard_thread() path when there are no pending discard
commands, it fails to reset the wait_ms to max timeout value.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Callers may pass fio parameter with NULL value to f2fs_allocate_data_block(),
so we should make sure accessing fio's field after fio's validation check.
Fixes: f608c38c59 ("f2fs: clean up parameter of f2fs_allocate_data_block()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the cache writing process, if it is an atomic file, increase the page
count of F2FS_WB_CP_DATA, otherwise increase the page count of
F2FS_WB_DATA.
When you step into the hook branch due to insufficient memory in
f2fs_write_begin, f2fs_drop_inmem_pages_all will be called to traverse
all atomic inodes and clear the FI_ATOMIC_FILE mark of all atomic files.
In f2fs_drop_inmem_pages，first acquire the inmem_lock , revoke all the
inmem_pages, and then clear the FI_ATOMIC_FILE mark. Before this mark is
cleared, other threads may hold inmem_lock to add inmem_pages to the inode
that has just been emptied inmem_pages, and increase the page count of
F2FS_WB_CP_DATA.
When the IO returns, it is found that the FI_ATOMIC_FILE flag is cleared
by f2fs_drop_inmem_pages_all, and f2fs_is_atomic_file returns false,which
causes the page count of F2FS_WB_DATA to be decremented. The page count of
F2FS_WB_CP_DATA cannot be cleared. Finally, hungtask is triggered in
f2fs_wait_on_all_pages because get_pages will never return zero.
process A: process B:
f2fs_drop_inmem_pages_all
->f2fs_drop_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__revoke_inmem_pages of inode#1 f2fs_ioc_commit_atomic_write
->mutex_unlock(&fi->inmem_lock) ->f2fs_commit_inmem_pages of inode#1
->mutex_lock(&fi->inmem_lock)
->__f2fs_commit_inmem_pages
->f2fs_do_write_data_page
->f2fs_outplace_write_data
->do_write_page
->f2fs_submit_page_write
->inc_page_count(sbi, F2FS_WB_CP_DATA )
->mutex_unlock(&fi->inmem_lock)
->spin_lock(&sbi->inode_lock[ATOMIC_FILE]);
->clear_inode_flag(inode, FI_ATOMIC_FILE)
->spin_unlock(&sbi->inode_lock[ATOMIC_FILE])
f2fs_write_end_io
->dec_page_count(sbi, F2FS_WB_DATA );
We can fix the problem by putting the action of clearing the FI_ATOMIC_FILE
mark into the inmem_lock lock. This operation can ensure that no one will
submit the inmem pages before the FI_ATOMIC_FILE mark is cleared, so that
there will be no atomic writes waiting for writeback.
Fixes: 57864ae5ce ("f2fs: limit # of inmemory pages")
Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this patch, we will add two new mount options: "gc_merge" and
"nogc_merge", when background_gc is on, "gc_merge" option can be
set to let background GC thread to handle foreground GC requests,
it can eliminate the sluggish issue caused by slow foreground GC
operation when GC is triggered from a process with limited I/O
and CPU resources.
Original idea is from Xiang.
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to avoid race with f2fs_do_replace_block().
Fixes: f5a53edcf0 ("f2fs: support aligned pinned file")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the alloc_type of the original curseg is LFS,
when we change_curseg and then do recover curseg,
the alloc_type becomes SSR.
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With the default DPOLICY_BG discard thread is ioaware, which prevents
the discard thread from issuing the discard commands. On low RAM setups,
it is observed that these discard commands in the cache are consuming
high memory. This patch aims to relax the memory pressure on the system
due to f2fs pending discard cmds by changing the policy to DPOLICY_FORCE
based on the nm_i->ram_thresh configured.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
AT_SSR mode is introduced by age threshold based GC for better
hot/cold data seperation and avoiding free segment cost. However,
LFS write mode is preferred in the scenario of foreground or high
urgent GC, which should be finished ASAP. Let's only use AT_SSR
in background GC and not high urgent GC modes.
Signed-off-by: Weichao Guo <guoweichao@oppo.com>
Signed-off-by: Huang Jianan <huangjianan@oppo.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.
To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In trim thread, let's add a condition to check discard command number
before traversing discard pending list, it can avoid unneeded traversing
if there is no discard command.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add more detailed comments for explicit memory barrier used by
f2fs, in order to enhance code readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.
However, after commit 803e74be04 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.
Fixes: 803e74be04 ("f2fs: stop GC when the victim becomes fully valid")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
This patch deprecates f2fs_trace_io, since f2fs uses page->private more broadly,
resulting in more buggy cases.
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use the blkdev_issue_flush helper instead of duplicating it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We will add a new "compress_mode" mount option to control file
compression mode. This supports "fs" and "user". In "fs" mode (default),
f2fs does automatic compression on the compression enabled files.
In "user" mode, f2fs disables the automaic compression and gives the
user discretion of choosing the target file and the timing. It means
the user can do manual compression/decompression on the compression
enabled files using ioctls.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
section is dirty, but dirty_secmap may not set
Reported-by: Jia Yang <jiayang5@huawei.com>
Fixes: da52f8ade4 ("f2fs: get the right gc victim section when section has several segments")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Lei Li reported a issue: if foreground operations are frequent, background
checkpoint may be always skipped due to below check, result in losing more
data after sudden power-cut.
f2fs_balance_fs_bg()
...
if (!is_idle(sbi, REQ_TIME) &&
(!excess_dirty_nats(sbi) && !excess_dirty_nodes(sbi)))
return;
E.g:
cp_interval = 5 second
idle_interval = 2 second
foreground operation interval = 1 second (append 1 byte per second into file)
In such case, no matter when it calls f2fs_balance_fs_bg(), is_idle(, REQ_TIME)
returns false, result in skipping background checkpoint.
This patch changes as below to make trigger condition being more reasonable:
- trigger sync_fs() if dirty_{nats,nodes} and prefree segs exceeds threshold;
- skip triggering sync_fs() if there is any background inflight IO or there is
foreground operation recently and meanwhile cp_rwsem is being held by someone;
Reported-by: Lei Li <noctis.akm@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes f2fs_flush_device_cache() to skip issuing flush for
nobarrier case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on
f2fs_get_meta_page_nofail().
Quick fix was not to give any error with infinite loop, but syzbot caught
a case where it goes to that loop from fuzzed image. In turned out we abused
f2fs_get_meta_page_nofail() like in the below call stack.
- f2fs_fill_super
- f2fs_build_segment_manager
- build_sit_entries
- get_current_sit_page
INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
stack:26960 pid: 6870 ppid: 6869 flags:0x00004006
Call Trace:
Showing all locks held in the system:
1 lock held by khungtaskd/1179:
#0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
#0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
#0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229
Actually, we didn't have to use _nofail in this case, since we could return
error to mount(2) already with the error handler.
As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().
Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 0b6d4ca04a ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
then, we can add specified entry into rb-tree with 64-bits segment time
as key.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't let f2fs inner GC ruins original aging degree of segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, once we update one block in segment, we will update mtime of
segment to last time, making aged segment becoming freshest, result in
that GC with cost benefit algorithm missing such segment, So this patch
changes to record mtime as average block updating time instead of last
updating time.
It's not needed to reset mtime for prefree segment, as se->valid_blocks
is zero, then old se->mtime won't take any weight with below calculation:
se->mtime = div_u64(se->mtime * se->valid_blocks + mtime,
se->valid_blocks + 1);
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since DUMMY_WRITTEN_PAGE and ATOMIC_WRITTEN_PAGE have already been
converted as unsigned long type, we don't need do type casting again.
Signed-off-by: Xiaojun Wang <wangxiaojun11@huawei.com>
Reported-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
NVMe Zoned Namespace devices can have zone-capacity less than zone-size.
Zone-capacity indicates the maximum number of sectors that are usable in
a zone beginning from the first sector of the zone. This makes the sectors
sectors after the zone-capacity till zone-size to be unusable.
This patch set tracks zone-size and zone-capacity in zoned devices and
calculate the usable blocks per segment and usable segments per section.
If zone-capacity is less than zone-size mark only those segments which
start before zone-capacity as free segments. All segments at and beyond
zone-capacity are treated as permanently used segments. In cases where
zone-capacity does not align with segment size the last segment will start
before zone-capacity and end beyond the zone-capacity of the zone. For
such spanning segments only sectors within the zone-capacity are used.
During writes and GC manage the usable segments in a section and usable
blocks per segment. Segments which are beyond zone-capacity are never
allocated, and do not need to be garbage collected, only the segments
which are before zone-capacity needs to garbage collected.
For spanning segments based on the number of usable blocks in that
segment, write to blocks only up to zone-capacity.
Zone-capacity is device specific and cannot be configured by the user.
Since NVMe ZNS device zones are sequentially write only, a block device
with conventional zones or any normal block device is needed along with
the ZNS device for the metadata operations of F2fs.
A typical nvme-cli output of a zoned device shows zone start and capacity
and write pointer as below:
SLBA: 0x0 WP: 0x0 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x20000 WP: 0x20000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
SLBA: 0x40000 WP: 0x40000 Cap: 0x18800 State: EMPTY Type: SEQWRITE_REQ
Here zone size is 64MB, capacity is 49MB, WP is at zone start as the zones
are in EMPTY state. For each zone, only zone start + 49MB is usable area,
any lba/sector after 49MB cannot be read or written to, the drive will fail
any attempts to read/write. So, the second zone starts at 64MB and is
usable till 113MB (64 + 49) and the range between 113 and 128MB is
again unusable. The next zone starts at 128MB, and so on.
Signed-off-by: Aravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit da52f8ade4 ("f2fs: get the right gc victim section when section
has several segments") added code to count blocks of each section using
variables with type 'unsigned short', which has 2 bytes size in many
systems. However, the counts can be larger than the 2 bytes range and
type conversion results in wrong values. Especially when the f2fs
sections have blocks as many as USHRT_MAX + 1, the count is handled as 0.
This triggers eternal loop in init_dirty_segmap() at mount system call.
Fix this by changing the type of the variables to block_t.
Fixes: da52f8ade4 ("f2fs: get the right gc victim section when section has several segments")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Current judgment condition of f2fs_bug_on in function update_sit_entry():
new_vblocks >> (sizeof(unsigned short) << 3) ||
new_vblocks > sbi->blocks_per_seg
which equivalents to:
new_vblocks < 0 || new_vblocks > sbi->blocks_per_seg
The latter is more intuitive.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reported-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
to two independent functions:
- f2fs_allocate_new_segment() for specified type segment allocation
- f2fs_allocate_new_segments() for all data type segments allocation
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_ioc_gc_range performs multiple segments gc ops, the return
value of f2fs_ioc_gc_range is determined by the last segment gc ops.
If its ops failed, the f2fs_ioc_gc_range will be considered to be failed
despite some of previous segments gc ops succeeded. Therefore, so we
fix: Redefine the return value of getting victim ops and add exception
handle for f2fs_gc. In particular, 1).if target has no valid block, it
will go on. 2).if target sectoion has valid block(s), but it is current
section, we will reminder the caller.
Signed-off-by: Qilong Zhang <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use validation of @fio to inidcate whether caller want to serialize IOs
in io.io_list or not, then @add_list will be redundant, remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- to avoid race between checkpoint and quota file writeback, it
just needs to hold read lock of node_write in writeback path.
- node_write lock has covered all LFS data write paths, it's not
necessary, we only need to hold node_write lock at write path of
quota file.
This refactors commit ca7f76e680 ("f2fs: fix wrong discard space").
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Assume each section has 4 segment:
.___________________________.
|_Segment0_|_..._|_Segment3_|
. .
. .
.__________.
|_section0_|
Segment 0~2 has 0 valid block, segment 3 has 512 valid blocks.
It will fail if we want to gc section0 in this scenes,
because all 4 segments in section0 is not dirty.
So we should use dirty section bitmap instead of dirty segment bitmap
to get right victim section.
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Under heavy fsstress, we may triggle panic while issuing discard,
because __check_sit_bitmap() detects that discard command may earse
valid data blocks, the root cause is as below race stack described,
since we removed lock when flushing quota data, quota data writeback
may race with write_checkpoint(), so that it causes inconsistency in
between cached discard entry and segment bitmap.
- f2fs_write_checkpoint
- block_operations
- set_sbi_flag(sbi, SBI_QUOTA_SKIP_FLUSH)
- f2fs_flush_sit_entries
- add_discard_addrs
- __set_bit_le(i, (void *)de->discard_map);
- f2fs_write_data_pages
- f2fs_write_single_data_page
: inode is quota one, cp_rwsem won't be locked
- f2fs_do_write_data_page
- f2fs_allocate_data_block
- f2fs_wait_discard_bio
: discard entry has not been added yet.
- update_sit_entry
- f2fs_clear_prefree_segments
- f2fs_issue_discard
: add discard entry
In order to fix this, this patch uses node_write to serialize
f2fs_allocate_data_block and checkpoint.
Fixes: 435cbab95e ("f2fs: fix quota_sync failure due to f2fs_lock_op")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We never use return value of __insert_discard_tree(), so remove it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When a discard_cmd needs to be split due to dpolicy->max_requests, then
for the remaining length it will be either merged into another cmd or a
new discard_cmd will be created. In this case, there is double
accounting of dcc->undiscard_blks for the remaining len, due to which
it shows incorrect value in stats.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In case a discard_cmd is split into several bios, the dc->error
must not be overwritten once an error is reported by a bio. Also,
move it under dc->lock.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS already has a default timeout of 5 secs for discards that
can be issued during umount, but it can take more than the 5 sec
timeout if the underlying UFS device queue is already full and there
are no more available free tags to be used. Fix this by submitting a
small batch of discard requests so that it won't cause the device
queue to be full at any time and thus doesn't incur its wait time
in the umount context.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While checking discard timeout, we use specified type
UMOUNT_DISCARD_TIMEOUT, so just replace doplicy.timeout with
it, and switch doplicy.timeout to bool type.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Data flush can generate heavy IO and cause long latency during
flush, so it's not appropriate to trigger it in foreground
operation.
And also, we may face below potential deadlock during data flush:
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- filemap_fdatawrite -- stuck on flush same cluster
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Geert Uytterhoeven reported:
for parameter HZ/50 in congestion_wait(BLK_RW_ASYNC, HZ/50);
On some platforms, HZ can be less than 50, then unexpected 0 timeout
jiffies will be set in congestion_wait().
This patch introduces a macro DEFAULT_IO_TIMEOUT to wrap a determinate
value with msecs_to_jiffies(20) to instead HZ/50 to avoid such issue.
Quoted from Geert Uytterhoeven:
"A timeout of HZ means 1 second.
HZ/50 means 20 ms, but has the risk of being zero, if HZ < 50.
If you want to use a timeout of 20 ms, you best use msecs_to_jiffies(20),
as that takes care of the special cases, and never returns 0."
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options,
and add F2FS_OPTION.fs_mode with below two status to indicate filesystem
mode.
enum {
FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */
FS_MODE_LFS, /* use lfs allocation only */
};
It can enhance code readability and fs mode's scalability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mutex lock won't serialize callers, in order to avoid starving of unlucky
caller, let's use rwsem lock instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Setting 0x40 in /sys/fs/f2fs/dev/ipu_policy gives a way to turn off
bio cache, which is useufl to check whether block layer using hardware
encryption engine merges IOs correctly.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove duplicate sbi->aw_cnt stats counter that tracks
the number of atomic files currently opened (it also shows
incorrect value sometimes). Use more relit lable sbi->atomic_files
to show in the stats.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
To catch f2fs bugs in write pointer handling code for zoned block
devices, check write pointers of non-open zones that current segments do
not point to. Do this check at mount time, after the fsync data recovery
and current segments' write pointer consistency fix. Or when fsync data
recovery is disabled by mount option, do the check when there is no fsync
data.
Check two items comparing write pointers with valid block maps in SIT.
The first item is check for zones with no valid blocks. When there is no
valid blocks in a zone, the write pointer should be at the start of the
zone. If not, next write operation to the zone will cause unaligned write
error. If write pointer is not at the zone start, reset the write pointer
to place at the zone start.
The second item is check between the write pointer position and the last
valid block in the zone. It is unexpected that the last valid block
position is beyond the write pointer. In such a case, report as a bug.
Fix is not required for such zone, because the zone is not selected for
next write operation until the zone get discarded.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
On sudden f2fs shutdown, write pointers of zoned block devices can go
further but f2fs meta data keeps current segments at positions before the
write operations. After remounting the f2fs, this inconsistency causes
write operations not at write pointers and "Unaligned write command"
error is reported.
To avoid the error, compare current segments with write pointers of open
zones the current segments point to, during mount operation. If the write
pointer position is not aligned with the current segment position, assign
a new zone to the current segment. Also check the newly assigned zone has
write pointer at zone start. If not, reset write pointer of the zone.
Perform the consistency check during fsync recovery. Not to lose the
fsync data, do the check after fsync data gets restored and before
checkpoint commit which flushes data at current segment positions. Not to
cause conflict with kworker's dirfy data/node flush, do the fix within
SBI_POR_DOING protection.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've introduced fairly small number of patches as below.
Enhancement:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fix:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC
-----BEGIN PGP SIGNATURE-----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=qyrd
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've introduced fairly small number of patches as below.
Enhancements:
- improve the in-place-update IO flow
- allocate segment to guarantee no GC for pinned files
Bug fixes:
- fix updatetime in lazytime mode
- potential memory leak in f2fs_listxattr
- record parent inode number in rename2 correctly
- fix deadlock in f2fs_gc along with atomic writes
- avoid needless data migration in GC"
* tag 'f2fs-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: stop GC when the victim becomes fully valid
f2fs: expose main_blkaddr in sysfs
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
f2fs: Fix deadlock in f2fs_gc() context during atomic files handling
f2fs: show f2fs instance in printk_ratelimited
f2fs: fix potential overflow
f2fs: fix to update dir's i_pino during cross_rename
f2fs: support aligned pinned file
f2fs: avoid kernel panic on corruption test
f2fs: fix wrong description in document
f2fs: cache global IPU bio
f2fs: fix to avoid memory leakage in f2fs_listxattr
f2fs: check total_segments from devices in raw_super
f2fs: update multi-dev metadata in resize_fs
f2fs: mark recovery flag correctly in read_raw_super_block()
f2fs: fix to update time in lazytime mode
The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).
schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl
The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.
Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports 2MB-aligned pinned file, which can guarantee no GC at all
by allocating fully valid 2MB segment.
Check free segments by has_not_enough_free_secs() with large budget.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 8648de2c58 ("f2fs: add bio cache for IPU"), we added
f2fs_submit_ipu_bio() in __write_data_page() as below:
__write_data_page()
if (!S_ISDIR(inode->i_mode) && !IS_NOQUOTA(inode)) {
f2fs_submit_ipu_bio(sbi, bio, page);
....
}
in order to avoid below deadlock:
Thread A Thread B
- __write_data_page (inode x, page y)
- f2fs_do_write_data_page
- set_page_writeback ---- set writeback flag in page y
- f2fs_inplace_write_data
- f2fs_balance_fs
- lock gc_mutex
- lock gc_mutex
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_page
- f2fs_wait_on_page_writeback
- wait_on_page_writeback --- wait writeback of page y
However, the bio submission breaks the merge of IPU IOs.
So in this patch let's add a global bio cache for merged IPU pages,
then f2fs_wait_on_page_writeback() is able to submit bio if a
writebacked page is cached in global bio cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_allocate_data_block(), we will reset fio.retry for IO
alignment feature instead of IO serialization feature.
In addition, spread F2FS_IO_ALIGNED() to check IO alignment
feature status explicitly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes sematics of f2fs_is_checkpoint_ready()'s return
value as: return true when checkpoint is ready, other return false,
it can improve readability of below conditions.
f2fs_submit_page_write()
...
if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN) ||
!f2fs_is_checkpoint_ready(sbi))
__submit_merged_bio(io);
f2fs_balance_fs()
...
if (!f2fs_is_checkpoint_ready(sbi))
return;
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - Foreground GC, LFS and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by keeping track of such invalid segments and skip those
segments for selection in get_victim_by_default() to avoid endless
GC loop under such error scenarios. Currently, add this logic under
CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug
version.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix wrong bitmap size]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
build_sit_info() allocate all bitmaps for each segment one by one,
it's quite low efficiency, this pach changes to allocate large
continuous memory at a time, and divide it and assign for each bitmaps
of segment. For large size image, it can expect improving its mount
speed.
Signed-off-by: Chen Gong <gongchen4@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is one case can cause data corruption.
- write 4k to fileA
- fsync fileA, 4k data is writebacked to lbaA
- write 4k to fileA
- kworker flushs 4k to lbaB; dnode contain lbaB didn't be persisted yet
- write 4k to fileB
- kworker flush 4k to lbaA due to SSR
- SPOR -> dnode with lbaA will be recovered, however lbaA contains fileB's
data
One solution is tracking all fsynced file's block history, and disallow
SSR overwrite on newly invalidated block on that file.
However, during recovery, no matter the dnode is flushed or fsynced, all
previous dnodes until last fsynced one in node chain can be recovered,
that means we need to record all block change in flushed dnode, which
will cause heavy cost, so let's just use simple fix by forbidding SSR
overwrite directly.
Fixes: 5b6c6be2d8 ("f2fs: use SSR for warm node as well")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Pavel Machek reported:
"We normally use -EUCLEAN to signal filesystem corruption. Plus, it is
good idea to report it to the syslog and mark filesystem as "needing
fsck" if filesystem can do that."
Still we need improve the original patch with:
- use unlikely keyword
- add message print
- return EUCLEAN
However, after rethink this patch, I don't think we should add such
condition check here as below reasons:
- We have already checked the field in f2fs_sanity_check_ckpt(),
- If there is fs corrupt or security vulnerability, there is nothing
to guarantee the field is integrated after the check, unless we do
the check before each of its use, however no filesystem does that.
- We only have similar check for bitmap, which was added due to there
is bitmap corruption happened on f2fs' runtime in product.
- There are so many key fields in SB/CP/NAT did have such check
after f2fs_sanity_check_{sb,cp,..}.
So I propose to revert this unneeded check.
This reverts commit 56f3ce6751.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We do not need to set the SBI_NEED_FSCK flag in the error paths, if we
return error here, we will not update the checkpoint flag, so the code
is useless, just remove it.
Signed-off-by: Lihong Kou <koulihong@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
=============================================================================
BUG discard_cmd (Tainted: G B OE ): Objects remaining in discard_cmd on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
INFO: Slab 0xffffe1ac481d22c0 objects=36 used=2 fp=0xffff936b4748bf50 flags=0x2ffff0000000100
Call Trace:
dump_stack+0x63/0x87
slab_err+0xa1/0xb0
__kmem_cache_shutdown+0x183/0x390
shutdown_cache+0x14/0x110
kmem_cache_destroy+0x195/0x1c0
f2fs_destroy_segment_manager_caches+0x21/0x40 [f2fs]
exit_f2fs_fs+0x35/0x641 [f2fs]
SyS_delete_module+0x155/0x230
? vtime_user_exit+0x29/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
INFO: Object 0xffff936b4748b000 @offset=0
INFO: Object 0xffff936b4748b070 @offset=112
kmem_cache_destroy discard_cmd: Slab cache still has objects
Call Trace:
dump_stack+0x63/0x87
kmem_cache_destroy+0x1b4/0x1c0
f2fs_destroy_segment_manager_caches+0x21/0x40 [f2fs]
exit_f2fs_fs+0x35/0x641 [f2fs]
SyS_delete_module+0x155/0x230
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
Recovery can cache discard commands, so in error path of fill_super(),
we need give a chance to handle them, otherwise it will lead to leak
of discard_cmd slab cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
blkoff_off might over 512 due to fs corrupt or security
vulnerability. That should be checked before being using.
Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff.
Signed-off-by: Ocean Chen <oceanchen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In umount, we give an constand time to handle pending discard, previously,
in __issue_discard_cmd() we missed to check timeout condition in loop,
result in delaying long time, fix it.
Signed-off-by: Heng Xiao <heng.xiao@unisoc.com>
[Chao Yu: add commit message]
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Pavel reported, once we detect filesystem inconsistency in
f2fs_inplace_write_data(), it will be better to print kernel message as
we did in other places.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This extends the checkpoint option to allow checkpoint=disable:%u[%]
This allows you to specify what how much of the disk you are willing
to lose access to while mounting with checkpoint=disable. If the amount
lost would be higher, the mount will return -EAGAIN. This can be given
as a percent of total space, or in blocks.
Currently, we need to run garbage collection until the amount of holes
is smaller than the OVP space. With the new option, f2fs can mark
space as unusable up front instead of requiring garbage collection until
the number of holes is small enough.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The existing threshold for allowable holes at checkpoint=disable time is
too high. The OVP space contains reserved segments, which are always in
the form of free segments. These must be subtracted from the OVP value.
The current threshold is meant to be the maximum value of holes of a
single type we can have and still guarantee that we can fill the disk
without failing to find space for a block of a given type.
If the disk is full, ignoring current reserved, which only helps us,
the amount of unused blocks is equal to the OVP area. Of that, there
are reserved segments, which must be free segments, and the rest of the
ovp area, which can come from either free segments or holes. The maximum
possible amount of holes is OVP-reserved.
Now, consider the disk when mounting with checkpoint=disable.
We must be able to fill all available free space with either data or
node blocks. When we start with checkpoint=disable, holes are locked to
their current type. Say we have H of one type of hole, and H+X of the
other. We can fill H of that space with arbitrary typed blocks via SSR.
For the remaining H+X blocks, we may not have any of a given block type
left at all. For instance, if we were to fill the disk entirely with
blocks of the type with fewer holes, the H+X blocks of the opposite type
would not be used. If H+X > OVP-reserved, there would be more holes than
could possibly exist, and we would have failed to find a suitable block
earlier on, leading to a crash in update_sit_entry.
If H+X <= OVP-reserved, then the holes end up effectively masked by the OVP
region in this case.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add error prints to get more details on the mount failure.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon Reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203233
- Reproduces
gcc poc_13.c
./run.sh f2fs
- Kernel messages
F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
kernel BUG at fs/f2fs/segment.c:2133!
RIP: 0010:update_sit_entry+0x35d/0x3e0
Call Trace:
f2fs_allocate_data_block+0x16c/0x5a0
do_write_page+0x57/0x100
f2fs_do_write_node_page+0x33/0xa0
__write_node_page+0x270/0x4e0
f2fs_sync_node_pages+0x5df/0x670
f2fs_write_checkpoint+0x364/0x13a0
f2fs_sync_fs+0xa3/0x130
f2fs_do_sync_file+0x1a6/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The testcase fails because that, in fuzzed image, current segment was
allocated with LFS type, its .next_blkoff should point to an unused
block address, but actually, its bitmap shows it's not. So during
allocation, f2fs crash when setting bitmap.
Introducing sanity_check_curseg() to check such inconsistence of
current in-used segment.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use sbi.stat_lock to protect sbi->unusable_block_count accesss/udpate, in
order to avoid potential race on it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203239
- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
cc poc_15.c
./run.sh f2fs
sync
- Kernel messages
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:3162!
RIP: 0010:f2fs_inplace_write_data+0x12d/0x160
Call Trace:
f2fs_do_write_data_page+0x3c1/0x820
__write_data_page+0x156/0x720
f2fs_write_cache_pages+0x20d/0x460
f2fs_write_data_pages+0x1b4/0x300
do_writepages+0x15/0x60
__filemap_fdatawrite_range+0x7c/0xb0
file_write_and_wait_range+0x2c/0x80
f2fs_do_sync_file+0x102/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The reason is f2fs_inplace_write_data() will trigger kernel panic due
to data block locates in node type segment.
To avoid panic, let's just return error code and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_hw_support_discard() only tests if the super block device supports
discard. However, for a multi-device volume, not all disks used may
support discard. Improve the check performed to test all devices of
the volume and report discard as supported if at least one device of
the volume supports discard. To implement this, introduce the helper
function f2fs_bdev_support_discard(), which returns true for zoned block
devices (where discard is processed as a zone reset) and for regular
disks supporting the discard command.
f2fs_bdev_support_discard() is also used in __queue_discard_cmd() to
handle discard command issuing for a particular device of the volume.
That is, prevent issuing a discard command for block devices that do
not support it.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For zoned block devices, an array of zone types for each device is
allocated and initialized in order to determine if a section is stored
on a sequential zone (zone reset needed) or a conventional zone (no
zone reset needed and regular discard applies). Considering this usage,
the zone types stored in memory can be replaced with a bitmap to
indicate an equivalent information, that is, if a zone is sequential or
not. This reduces the memory usage for each zoned device by roughly 8:
on a 14TB disk with zones of 256 MB, the zone type array consumes
13x4KB pages while the bitmap uses only 2x4KB pages.
This patch changes the f2fs_dev_info structure blkz_type field to the
bitmap blkz_seq. Access to this bitmap is done using the helper
function f2fs_blkz_is_seq(), which is a rewrite of the function
get_blkz_type().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d1 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Gao Xiang reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=202749
f2fs may skip pageout() due to incorrect page reference count.
The problem here is that MM defined the rule [1] very clearly that
once page was set with PG_private flag, we should increment the
refcount in that page, also main flows like pageout(), migrate_page()
will assume there is one additional page reference count if
page_has_private() returns true.
But currently, f2fs won't add/del refcount when changing PG_private
flag. Anyway, f2fs should follow MM's rule to make MM's related flows
running as expected.
[1] https://lore.kernel.org/lkml/2b19b3c4-2bc4-15fa-15cc-27a13e5c7af1@aol.com/
Reported-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In error path of IPU, we didn't account iostat correctly, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes to allow failure of f2fs_bio_alloc() in
__submit_flush_wait(), which can simulate flush error in checkpoint()
for covering more error paths.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If every discard were issued successfully, we can avoid further discard.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This mode returns mount() quickly with EAGAIN. We can trigger this by
shutdown(F2FS_GOING_DOWN_NEED_FSCK).
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we umount f2fs, we need to avoid long delay due to discard commands, which
is actually taking tens of seconds, if storage is very slow on UNMAP. So, this
patch introduces timeout-based work on it.
By default, let me give 5 seconds for discard.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For all ordered cases in f2fs_wait_on_page_writeback(), we need to
check PageWriteback status, so let's clean up to relocate the check
into f2fs_wait_on_page_writeback().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Should use lstart (logical start address) instead of start (in dev) here.
This fixes a bug in multi-device scenarios.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes, I could observe # of issuing_discard to be 1 which blocks background
jobs due to is_idle()=false.
The only way to get out of it was to trigger gc_urgent. This patch avoids that
by checking any candidates as done in the list.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One report says memalloc failure during mount.
(unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14)
(show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0)
(dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160)
(warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0)
(__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120)
(kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688)
(build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc)
(f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188)
(mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20)
(f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c)
(mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134)
(vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4)
(do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc)
(SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48)
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reorders flow from
- update page
- set_page_dirty
- wait_on_page_writeback
to
- wait_on_page_writeback
- update page
- set_page_dirty
The reason is:
- set_page_dirty will increase reference of dirty page, the reference
should be cleared before wait_on_page_writeback to keep its consistency.
- some devices need stable page during page writebacking, so we
should not change page's data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a wrapper __is_large_section() to clean up codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to
access .raw_super field, to avoid unneeded pointer conversion, this
patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly.
Just do cleanup, no logic change.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we only account preflush command for flush_merge mode,
so for noflush_merge mode, we can not know in-flight preflush
command count, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Direct IO can be used in case of hardware encryption. The following
scenario results into data corruption issue in this path -
Thread A - Thread B-
-> write file#1 in direct IO
-> GC gets kicked in
-> GC submitted bio on meta mapping
for file#1, but pending completion
-> write file#1 again with new data
in direct IO
-> GC bio gets completed now
-> GC writes old data to the new
location and thus file#1 is
corrupted.
Fix this by submitting and waiting for pending io on meta mapping
for direct IO case in f2fs_map_blocks().
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to drop PG_checked flag on page as well when we clear PG_uptodate
flag, in order to avoid treating the page as GCing one later.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As rbtree supports caching leftmost node natively, update f2fs codes
to use rb_*_cached helpers to speed up leftmost node visiting.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Note that, it requires "f2fs: return correct errno in f2fs_gc".
This adds a lightweight non-persistent snapshotting scheme to f2fs.
To use, mount with the option checkpoint=disable, and to return to
normal operation, remount with checkpoint=enable. If the filesystem
is shut down before remounting with checkpoint=enable, it will revert
back to its apparent state when it was first mounted with
checkpoint=disable. This is useful for situations where you wish to be
able to roll back the state of the disk in case of some critical
failure.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[Jaegeuk Kim: use SB_RDONLY instead of MS_RDONLY]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is one case that we can leave bio in f2fs, result in hanging
page writeback waiter.
Thread A Thread B
- f2fs_write_cache_pages
- f2fs_submit_page_write
page #0 cached in bio #0 of cold log
- f2fs_submit_page_write
page #1 cached in bio #1 of warm log
- f2fs_write_cache_pages
- f2fs_submit_page_write
bio is full, submit bio #1 contain page #1
- f2fs_submit_merged_write_cond(, page #1)
fail to submit bio #0 due to page #1 is not in any cached bios.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to account meta IO, it enables to show write IO
from f2fs more comprehensively via 'status' debugfs entry.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids BUG_ON when f2fs_get_meta_page_nofail got EIO during
xfstests/generic/475.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This helps to control the frequency of submission of discard and
GC requests independently, based on the need.
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the verbose license text from f2fs files and replace them with
SPDX tags. This does not change the license of any of the code.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. Create a file in an encrypted directory
2. Do GC & drop caches
3. Read stale data before its bio for metapage was not issued yet
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't limit printing log, so that we will not miss any key messages.
This reverts commit a36c106dff.
In addition, we use printk_ratelimited to avoid too many log prints.
- error injection
- discard submission failure
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When dev is busy, discard thread wake up timeout can be aligned with the
exact time that it needs to wait for dev to come out of busy. This helps
to avoid unnecessary periodic wakeups and thus save some power.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
https://bugzilla.kernel.org/show_bug.cgi?id=200951
These is a NULL pointer dereference issue reported in bugzilla:
Hi,
in the setup there is a SATA SSD connected to a SATA-to-USB bridge.
The disc is "Samsung SSD 850 PRO 256G" which supports TRIM.
There are four partitions:
sda1: FAT /boot
sda2: F2FS /
sda3: F2FS /home
sda4: F2FS
The bridge is ASMT1153e which uses the "uas" driver.
There is no TRIM pass-through, so, when mounting it reports:
mounting with "discard" option, but the device does not support discard
The USB host is USB3.0 and UASP capable. It is the one on RK3399.
Given this everything works fine, except there is no TRIM support.
In order to enable TRIM a new UDEV rule is added [1]:
/etc/udev/rules.d/10-sata-bridge-trim.rules:
ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap"
After reboot any F2FS write hangs forever and dmesg reports:
Unable to handle kernel NULL pointer dereference
Also tested on a x86_64 system: works fine even with TRIM enabled.
same disc
same bridge
different usb host controller
different cpu architecture
not root filesystem
Regards,
Vicenç.
[1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280
Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122
[000000000000003e] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington
CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1
Hardware name: Sapphire-RK3399 Board (DT)
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : update_sit_entry+0x304/0x4b0
lr : update_sit_entry+0x108/0x4b0
sp : ffff00000ca13bd0
x29: ffff00000ca13bd0 x28: 000000000000003e
x27: 0000000000000020 x26: 0000000000080000
x25: 0000000000000048 x24: ffff8000ebb85cf8
x23: 0000000000000253 x22: 00000000ffffffff
x21: 00000000000535f2 x20: 00000000ffffffdf
x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8
x17: 0000000007ce6926 x16: 000000001c83ffa8
x15: 0000000000000000 x14: ffff8000f602df90
x13: 0000000000000006 x12: 0000000000000040
x11: 0000000000000228 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 00000000000535f2 x6 : ffff8000ebff3440
x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8
x3 : 00000000ffffffff x2 : 0000000000000020
x1 : 0000000000000000 x0 : ffff8000eb9e5800
Process nvim (pid: 957, stack limit = 0x0000000063a78320)
Call trace:
update_sit_entry+0x304/0x4b0
f2fs_invalidate_blocks+0x98/0x140
truncate_node+0x90/0x400
f2fs_remove_inode_page+0xe8/0x340
f2fs_evict_inode+0x2b0/0x408
evict+0xe0/0x1e0
iput+0x160/0x260
do_unlinkat+0x214/0x298
__arm64_sys_unlinkat+0x3c/0x68
el0_svc_handler+0x94/0x118
el0_svc+0x8/0xc
Code: f9400800 b9488400 36080140 f9400f01 (387c4820)
---[ end trace a0f21a307118c477 ]---
The reason is it is possible to enable discard flag on block queue via
UDEV, but during mount, f2fs will initialize se->discard_map only if
this flag is set, once the flag is set after mount, f2fs may dereference
NULL pointer on se->discard_map.
So this patch does below changes to fix this issue:
- initialize and update se->discard_map all the time.
- don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag
during mount.
- don't issue small discard on zoned block device.
- introduce some functions to enhance the readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_gc() called by f2fs_balance_fs() requires to be called outside of
fi->i_gc_rwsem[WRITE], since f2fs_gc() can try to grab it in a loop.
If it hits the miximum retrials in GC, let's give a chance to release
gc_mutex for a short time in order not to go into live lock in the worst
case.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts the commit - "b93f771 - f2fs: remove writepages lock"
to fix the drop in sequential read throughput.
Test: ./tiotest -t 32 -d /data/tio_tmp -f 32 -b 524288 -k 1 -k 3 -L
device: UFS
Before -
read throughput: 185 MB/s
total read requests: 85177 (of these ~80000 are 4KB size requests).
total write requests: 2546 (of these ~2208 requests are written in 512KB).
After -
read throughput: 758 MB/s
total read requests: 2417 (of these ~2042 are 512KB reads).
total write requests: 2701 (of these ~2034 requests are written in 512KB).
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When CONFIG_F2FS_FAULT_INJECTION is disabled, we get a warning about an
unused label:
fs/f2fs/segment.c: In function '__submit_discard_cmd':
fs/f2fs/segment.c:1059:1: error: label 'submit' defined but not used [-Werror=unused-label]
This could be fixed by adding another #ifdef around it, but the more
reliable way of doing this seems to be to remove the other #ifdefs
where that is easily possible.
By defining time_to_inject() as a trivial stub, most of the checks for
CONFIG_F2FS_FAULT_INJECTION can go away. This also leads to nicer
formatting of the code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Dan Carpenter reported:
The patch 20ee4382322c: "f2fs: issue small discard by LBA order" from
Jul 8, 2018, leads to the following Smatch warning:
fs/f2fs/segment.c:1277 __issue_discard_cmd_orderly()
warn: 'dc' was already freed.
See also:
fs/f2fs/segment.c:2550 __issue_discard_cmd_range() warn: 'dc' was already freed.
In order to fix this issue, let's get error from __submit_discard_cmd(),
and release current discard command after we referenced next one.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to support discard submission error injection for testing
error handling of __submit_discard_cmd().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Some devices has small max_{hw,}discard_sectors, so that in
__blkdev_issue_discard(), one big size discard bio can be split
into multiple small size discard bios, result in heavy load in IO
scheduler and device, which can hang other sync IO for long time.
Now, f2fs is trying to control discard commands more elaboratively,
in order to make less conflict in between discard IO and user IO
to enhance application's performance, so in this patch, we will
split discard bio in f2fs in prior to in block layer to reduce
issuing multiple discard bios in a short time.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generic/260 reported below error:
[+] Default length with start set (should succeed)
[+] Length beyond the end of fs (should succeed)
[+] Length beyond the end of fs with start set (should succeed)
+./tests/generic/260: line 94: [: 18446744073709551615: integer expression expected
+./tests/generic/260: line 104: [: 18446744073709551615: integer expression expected
Test done
...
In f2fs_trim_fs(), if there is no discard being trimmed, we need to correct
range->len before return.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fsyncer will wait on all dnode pages of regular writeback before flushing,
if there are async dnode pages blocked by IO scheduler, it may decrease
fsync's performance.
In this patch, we choose to let f2fs_balance_fs_bg() to trigger checkpoint
to flush these dnode pages of regular, so async IO of dnode page can be
elimitnated, making fsyncer only need to wait for sync IO.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For the case when sbi->segs_per_sec > 1 with lfs mode, take
section:segment = 5 for example, if the section prefree_map is
...previous section | current section (1 1 0 1 1) | next section...,
then the start = x, end = x + 1, after start = start_segno +
sbi->segs_per_sec, start = x + 5, then it will skip x + 3 and x + 4, but
their bitmap is still set, which will cause duplicated
f2fs_issue_discard of this same section in the next write_checkpoint:
round 1: section bitmap : 1 1 1 1 1, all valid, prefree_map: 0 0 0 0 0
then rm data block NO.2, block NO.2 becomes invalid, prefree_map: 0 0 1 0 0
write_checkpoint: section bitmap: 1 1 0 1 1, prefree_map: 0 0 0 0 0,
prefree of NO.2 is cleared, and no discard issued
round 2: rm data block NO.0, NO.1, NO.3, NO.4
all invalid, but prefree bit of NO.2 is set and cleared in round 1, then
prefree_map: 1 1 0 1 1
write_checkpoint: section bitmap: 0 0 0 0 0, prefree_map: 0 0 0 1 1, no
valid blocks of this section, so discard issued, but this time prefree
bit of NO.3 and NO.4 is skipped due to start = start_segno + sbi->segs_per_sec;
round 3:
write_checkpoint: section bitmap: 0 0 0 0 0, prefree_map: 0 0 0 1 1 ->
0 0 0 0 0, no valid blocks of this section, so discard issued,
this time prefree bit of NO.3 and NO.4 is cleared, but the discard of
this section is sent again...
To fix this problem, we can align the start and end value to section
boundary for fstrim and real-time discard operation, and decide to issue
discard only when the whole section is invalid, which can issue discard
aligned to section size as much as possible and avoid redundant discard.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If caller of __get_meta_page() can handle error, let's propagate error
from __get_meta_page().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For small granularity discard which size is smaller than 64KB, if we
issue those kind of discards orderly by size, their IOs will be spread
into entire logical address, so that in FTL, L2P table will be updated
randomly, result bad wear rate in the table.
In this patch, we choose to issue small discard by LBA order, by this
way, we can expect that L2P table updates from adjacent discard IOs can
be merged in the cache, so it can reduce lifetime wearing of flash.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For background discard policy, even if there is queued user IO, still
we will check max_requests times for next discard entry, it is unneeded,
let's just stop this round submission immediately.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should account trimmed block number from __wait_all_discard_cmd
in __issue_discard_cmd_range, otherwise trimmed blocks returned
by f2fs_trim_fs will be wrong, this patch fixes it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Laibin Qiu