Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/
Suggested-by: Nuno Sá <noname.nuno@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This patch adds IRQ support to the PASemi I2C controller driver to
increase the performace of I2C transactions on platforms with PASemi I2C
controllers. While primarily intended for Apple silicon platforms, this
patch should also help in enabling IRQ support for older PASemi hardware
as well should the need arise.
This version of the patch has been tested on an M1 Ultra Mac Studio,
as well as an M1 MacBook Pro, and userspace launches successfully
while using the IRQ path for I2C transactions.
Signed-off-by: Arminder Singh <arminders208@outlook.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
DW_IC_COMP_VERSION register contains the ASCII representation of the
Synopsys component version. Here 0x3131312A == "111*" means version
1.11* required for DW_IC_SDA_HOLD register availability where '*' means
any letter starting from 'a'.
DW_IC_COMP_TYPE is constant and is derived from two ASCII letters "DW"
followed by a 16-bit unsigned number.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Align all defines to the same column.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit 90312351fd ("i2c: designware: MASTER mode as separated driver")
introduced disable_int pointer but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable_int() and scope is inside the same kernel module.
Since i2c_dw_disable_int() is just masking interrupts and the direct
DW_IC_INTR_MASK register write looks more clear in the code use that and
remove it from common code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In my opinion a few lines of spurious interrupt detection code can be
moved to the actual master interrupt handling function i2c_dw_isr()
without hurting readability.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It is kind of needless to print interrupt status when code immediately
after that finds interrupt was not originating from this device.
Therefore move it after spurious interrupt detection.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Do not return with interrupt handled if host controller is off and thus
interrupt is originating from other device or is spurious.
Add a check to detect when controller is runtime suspended or
transitioning/reset. In latter case all raw interrupt status register
bits may read one. In both cases return IRQ_NONE to indicate interrupt
was not from this device.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Interrupt processing code in i2c-designware-slave.c is bit more readable
if not divided into another subroutine. Also explicit IRQ_NONE and
IRQ_HANDLED return values are more obvious.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Remove unused completion code from i2c-designware-slave.c. Used only in
i2c-designware-master.c.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
These struct dw_i2c_dev members are not used in i2c-designware-slave.c
so remove re-initialization of them from i2c_dw_reg_slave().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Define software status flags with a BIT() macro. While at it remove
STATUS_IDLE and replace its use with zero initialization and status
flags clearing with a mask.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Writes from I2C bus often fail when testing the i2c-designware-slave.c
with the slave-eeprom backend. The same writes work correctly when
testing with a real 24c02 EEPROM chip.
In the tests below an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6.
1. i2cset -y 6 0x65 0x00 0x55
Single byte 0x55 write into address 0x00. No data goes into simulated
EEPROM. Debug prints from the i2c_dw_irq_handler_slave():
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
2. i2ctransfer -y 6 w9@0x65 0x00 0xff-
Write 8 bytes with decrementing value starting from 0xff at address 0x00
and forward. Only some of the data goes into arbitrary addresses.
Content is something like below but varies:
00000000 f9 f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000050 00 00 00 00 00 00 ff fe 00 00 00 00 00 00 00 00 |................|
000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fb fa |................|
In this case debug prints were:
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x510 : INTR_STAT=0x0
Both cases show there is more data coming from the receive FIFO still
after detecting the STOP condition. This can be seen from interrupt
status bits DW_IC_INTR_STOP_DET (0x200) and DW_IC_INTR_RX_FULL (0x4).
Perhaps due interrupt latencies the receive FIFO is not read fast
enough, STOP detection happens synchronously when it occurs on the I2C
bus and the DW_IC_INTR_RX_FULL keeps coming as long as there are more
bytes in the receive FIFO.
Fix this by reading the receive FIFO completely empty whenever
DW_IC_INTR_RX_FULL occurs. Use RFNE, Receive FIFO Not Empty bit in the
DW_IC_STATUS register to loop through bytes in the FIFO.
While at it do not test the return code from i2c_slave_event() for the
I2C_SLAVE_WRITE_RECEIVED since to my understanding this hardware cannot
generate NACK to incoming bytes and debug print itself does not have
much value.
Reported-by: Tian Ye <tianye@sugon.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some read types from I2C bus don't work correctly when testing the
i2c-designware-slave.c with the slave-eeprom backend. The same reads
work correctly when testing with a real 24c02 EEPROM chip.
In the following tests an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6:
1. i2cdump -y 6 0x65 b (OK)
Random read. Each byte are read using a byte address write with a
current address read in a same message.
2. i2cdump -y 6 0x65 c (OK, was NOK before commit 3b5f7f10ff when it
was repeating the 1st byte)
Repeated current address read. One byte address write message
followed by repeated current address read messages.
3. i2cdump -y 6 0x65 i (NOK, each 32 byte block repeats the 1st byte of
block)
Sequential read using SMBus Block Read. For each 32 byte block a byte
address write followed by 32 sequental reads in a same message.
These findings are explained because the implementation has had a
mismatch between hardware interrupts and what I2C slave events should be
sent after those interrupts. Despite that the case 1 happened to have
always the I2C slave events sent to a right order with a right data
between backend and the I2C bus.
Hardware generates the DW_IC_INTR_RD_REQ interrupt when another host is
attempting to read and for sequential reads after. DW_IC_INTR_RX_DONE
occurs when host does not acknowledge a transmitted byte which is an
indication the end of transmission.
Those interrupts do not match directly with I2C_SLAVE_READ_REQUESTED and
I2C_SLAVE_READ_PROCESSED events which is how the code was and is
practically using them. The slave-eeprom backend increases the buffer
index with the I2C_SLAVE_READ_PROCESSED event and returns the data from
current index when receiving only the I2C_SLAVE_READ_REQUESTED event.
That explains the repeated bytes in case 3 and also case 2 before
commit 3b5f7f10ff ("i2c: designware: slave should do WRITE_REQUESTED
before WRITE_RECEIVED").
Patch fixes the case 3 while keep cases 1 and 2 working with following
changes:
- First DW_IC_INTR_RD_REQ interrupt will change the state machine to
read in progress state, send I2C_SLAVE_READ_REQUESTED event and
transmit the first byte from backend
- Subsequent DW_IC_INTR_RD_REQ interrupts will send
I2C_SLAVE_READ_PROCESSED events and transmit next bytes from backend
- STOP won't change the state machine. Otherwise case 2 won't work since
we cannot distinguish current address read from sequentiel read
- DW_IC_INTR_RX_DONE interrupt is needless since there is no mechanism
to inform it to a backend. It cannot be used to change state machine
at the end of read either due the same reason than above
- Next host write to us will change the state machine from read to write
in progress state
- STATUS_WRITE_IN_PROGRESS and STATUS_READ_IN_PROGRESS are considered
now to be status flags not the state of the driver. This is how we
treat them in i2c-designware-master.c
While at it do not test the return code from i2c_slave_event() for
I2C_SLAVE_READ_REQUESTED and I2C_SLAVE_READ_PROCESSED since it returns
always 0.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add the new compatible for HiSilicon i2c.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The HiSilicon I2C controller can be used on embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The I2C controller IP used in the Allwinner F1C100s series of SoCs is
compatible with the ones used in the other Allwinner SoCs.
Add an F1C100s specific compatible string to the list of existing names.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To make the code easier to understand, add longer names to the
definitions of register fields. These longer names are based on source
code published by DELL/AESS for WPCM450, but should apply just as well
to NPCM7xx and NPCM8xx.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The unlabelled registers NPCM_I2CCTL4 to NPCM_I2CSCLHT overlap with the
bank 1 registers below, and they are accessed after selecting bank 0, so
they clearly belong to bank 0.
Move them together with the other bank 0 registers, and move the
unrelated definition of npcm_i2caddr down to keep the banked registers
in one piece.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c support for MT7986 SoC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add i2c compatible for MT7986 SOC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use msix or msi interrupts if the hardware supports it. Else, fallback to
legacy interrupts.
Co-developed-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
A use-after-free bugfix in the smscufx driver and various minor
error path fixes, smaller build fixes, sysfs fixes and
typos in comments in the stifb, sisfb, da8xxfb, xilinxfb, sm501fb,
gbefb and cyber2000fb drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCY16ulQAKCRD3ErUQojoP
XyvDAP9ZhF0SjbnRBwHAU9ZYC7XpCwcoqBRWFCCU7mmmbkXrJAD9F1LcEwZPGyn/
5/hiTwzM8ioJz6HB3r04M88bl4b1cwI=
=SnCh
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A use-after-free bugfix in the smscufx driver and various minor error
path fixes, smaller build fixes, sysfs fixes and typos in comments in
the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
drivers"
* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: cyber2000fb: fix missing pci_disable_device()
fbdev: sisfb: use explicitly signed char
fbdev: smscufx: Fix several use-after-free bugs
fbdev: xilinxfb: Make xilinxfb_release() return void
fbdev: sisfb: fix repeated word in comment
fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
fbdev: da8xx-fb: Fix error handling in .remove()
fbdev: MIPS supports iomem addresses
Here are some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second
fix to get it right.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY16EAA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloyQCdFV2qLAb6IK+fx9rS8ThuxT13O5AAn1ec8Fd6
BSWYN1TIO6r83khtJ8y4
=34Sj
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
Here are a few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard
work he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't
relevant for 6.1-final, as it is a new feature and people are
still reviewing and modifying it.
All of these have been in the linux-next tree with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY16Evg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylP7ACbBFKioz4LgbVYYY5f12qJ3MfbfBYAn1EKSYUr
jgJxsPv1LeTTicOqGIy9
=Jks2
-----END PGP SIGNATURE-----
Merge tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
-----BEGIN PGP SIGNATURE-----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=IbVz
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
-----BEGIN PGP SIGNATURE-----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=zS3P
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
-----BEGIN PGP SIGNATURE-----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=/RPn
-----END PGP SIGNATURE-----
Merge tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- use after free fix for reconnect race
- two memory leak fixes
* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free caused by invalid pointer `hostname`
cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()
-----BEGIN PGP SIGNATURE-----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=dZjo
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"One fix from Jean-Philippe Brucker, addressing a regression in which
early boot code on ARM64 would use the non-_early variant of the
arch_get_random family of functions, resulting in the architectural
random number generator appearing unavailable during that early phase
of boot.
The fix simply changes arch_get_random*() to arch_get_random*_early().
This distinction between these two functions is a bit of an old wart
I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
_early variant, so that one function does the right thing in all
contexts without overhead"
* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use arch_get_random*_early() in random_init()
21 small fixes, all in drivers. Some of these arrived during the
merge window and got held over to make sure of testing on the -rc
tree. The biggest change is for Standards conformance in the target
driver, closely followed by a set of bug fixes in megaraid_sas.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCY1xAISYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR8DAQCm8x/C
f0h26w+Mv09spAyw6fqvuoC3+giLmiIuxZq1FgD+M7CZ6mcLhsxpE8GVNzKWnPvI
jVYDsKdJ82B+tuIDDa0=
=Z+/m
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Varions small fixes, all in drivers.
Some of these arrived during the merge window and got held over to
make sure of testing on the -rc tree.
The biggest change is for standards conformance in the target driver,
closely followed by a set of bug fixes in megaraid_sas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: ufs: core: Fix typo in comment
scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRS
scsi: ufs: core: Fix typo for register name in comments
scsi: pm80xx: Display proc_name in sysfs
scsi: ufs: core: Fix the error log in ufshcd_query_flag_retry()
scsi: ufs: core: Remove unneeded casts from void *
scsi: lpfc: Fix spelling mistake "unsolicted" -> "unsolicited"
scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
scsi: target: iblock: Fold iblock_emulate_read_cap_with_block_size() into iblock_get_blocks()
scsi: qla2xxx: Fix serialization of DCBX TLV data request
scsi: ufs: qcom: Remove redundant dev_err() call
scsi: megaraid_sas: Move megasas_dbg_lvl init to megasas_init()
scsi: megaraid_sas: Remove unnecessary memset()
scsi: megaraid_sas: Simplify megasas_update_device_list
scsi: megaraid_sas: Correct an error message
scsi: megaraid_sas: Correct value passed to scsi_device_lookup()
scsi: target: core: UA on all LUNs after reset
scsi: target: core: New key must be used for moved PR
scsi: target: core: Abort all preempted regs if requested
scsi: target: core: Fix memory leak in preempt_and_abort
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmNcRTYQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpkc2D/4yxjQ+lAmXLrqZOGAZc+r2GpiCFsgFcpKP
i3ezeeo3zmdaoUH778DcbPo0oeWY/iIvV2RDo3/0PBHIlGL43W9e7zsnauRxUwtw
/Aj140Tsm5/lKnBy8n0nT+DO4LE22JnBHi5XjlFELBwM+deBxS+izinFtcOQC8sj
58XWSmKag/Lv5JLvcYMj+PprtGOKzfNAacXvTjouy0IlEyb9E/yPMELS8lWFv8i2
QELtvuEDxODpQtA+Ph0O/o00A8Fg/lC4EH5uvExFMr8k74CGFm32Bar1UuaJ9QAs
5b8wateTra51yOGW3NEl1ph+4qVe9e4mutrLOFrChYylk5LePOVAki3wYb3lREiU
rTOEKzUj3P/LHLpl4els0yIQ0gHXs60/M/Vn3TC50+2DnV00qEfvaocZ8vtXOux4
YR+2cKUxk2CRNyj2BB3WRlrIkCIVk+ehl17E2cdrg0m8SMqk0GAYbpXD753L9uiy
I7IQEqYB+op501pmTcVskFUfW9ozT96YD53fwSOTR/pEK+esHN0GfqxI6lcA6Q0O
M2AWEiu8t1PbSONVH/p895gfgGHdRHl6zgvR+ADJMDEmc7dpEoAxsoTj4HIirXbe
sGHi7ycrQR6aLdHahjCukjUVkZkuhXJkAQmq2XURJgmEcz7iJme23WqtWWUUoQvi
pk6e1RSqSA==
=Zfnu
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
-----BEGIN PGP SIGNATURE-----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=DjrA
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a fix for a locking regression introduced with the deferred
task_work running from this merge window"
* tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux:
io_uring: unlock if __io_run_local_work locked inside
io_uring: use io_run_local_work_locked helper
Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY1w/LAAKCRDdBJ7gKXxA
jovHAQDqY3TGAVQsvCBKdUqkp5nakZ7o7kK+mUGvsZ8Cgp5fwQD/Upsu93RZsTgm
oJfYW4W6eSVEKPu7oAY20xVwLvK6iQ0=
=z0Fn
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
- Fix a case of rescheduling with user access unlocked, when preempt is enabled.
- A follow-up fix for a recent fix, which could lead to IRQ state assertions firing
incorrectly.
- Two fixes for lockdep warnings seen when using kfence with the Hash MMU.
- Two fixes for preempt warnings seen when using the Hash MMU.
- Two fixes for the VAS coprocessor mechanism used on pseries.
- Prevent building some of our older KVM backends when CONTEXT_TRACKING_USER is enabled,
as it's known to cause crashes.
- A couple of fixes for issues seen with PMU NMIs.
Thanks to: Nicholas Piggin, Guenter Roeck, Frederic Barrat Haren Myneni, Sachin Sant,
Samuel Holland.
-----BEGIN PGP SIGNATURE-----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=J1SJ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a case of rescheduling with user access unlocked, when preempt is
enabled.
- A follow-up fix for a recent fix, which could lead to IRQ state
assertions firing incorrectly.
- Two fixes for lockdep warnings seen when using kfence with the Hash
MMU.
- Two fixes for preempt warnings seen when using the Hash MMU.
- Two fixes for the VAS coprocessor mechanism used on pseries.
- Prevent building some of our older KVM backends when
CONTEXT_TRACKING_USER is enabled, as it's known to cause crashes.
- A couple of fixes for issues seen with PMU NMIs.
Thanks to Nicholas Piggin, Guenter Roeck, Frederic Barrat Haren Myneni,
Sachin Sant, and Samuel Holland.
* tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context
powerpc/64s/interrupt: Perf NMI should not take normal exit path
powerpc/64/interrupt: Prevent NMI PMI causing a dangerous warning
KVM: PPC: BookS PR-KVM and BookE do not support context tracking
powerpc: Fix reschedule bug in KUAP-unlocked user copy
powerpc/64s: Fix hash__change_memory_range preemption warning
powerpc/64s: Disable preemption in hash lazy mmu mode
powerpc/64s: make linear_map_hash_lock a raw spinlock
powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe
powerpc/64s: Add lockdep for HPTE lock
powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU
powerpc/pseries/vas: Add VAS IRQ primary handler
Currently the return value of 'sub_driver->init' is not checked. If
sparse_keymap_setup() called in the init function fails, 'generic_
inputdev' is freed, then it will lead a UAF when using it in generic_
acpi_laptop_init(). Fix it by checking the return value and setting
generic_inputdev to NULL after free, so as to avoid double free it.
The error code in generic_subdriver_init() is always negative, so the
return of generic_subdriver_init() can be simplified.
Fixes: 6246ed0911 ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some laptops don't support SW_LID, but still have backlight control,
move backlight resuming before SW_LID event handling so as to avoid
backlight mistake due to early return.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Not all compilers support declare variables in switch-case, so move
declarations to the beginning of a function. Otherwise we may get such
build errors:
arch/loongarch/net/bpf_jit.c: In function ‘emit_atomic’:
arch/loongarch/net/bpf_jit.c:362:3: error: a label can only be part of a statement and a declaration is not a statement
u8 r0 = regmap[BPF_REG_0];
^~
arch/loongarch/net/bpf_jit.c: In function ‘build_insn’:
arch/loongarch/net/bpf_jit.c:727:3: error: a label can only be part of a statement and a declaration is not a statement
u8 t7 = -1;
^~
arch/loongarch/net/bpf_jit.c:778:3: error: a label can only be part of a statement and a declaration is not a statement
int ret;
^~~
arch/loongarch/net/bpf_jit.c:779:3: error: expected expression before ‘u64’
u64 func_addr;
^~~
arch/loongarch/net/bpf_jit.c:780:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
bool func_addr_fixed;
^~~~
arch/loongarch/net/bpf_jit.c:784:11: error: ‘func_addr’ undeclared (first use in this function); did you mean ‘in_addr’?
&func_addr, &func_addr_fixed);
^~~~~~~~~
in_addr
arch/loongarch/net/bpf_jit.c:784:11: note: each undeclared identifier is reported only once for each function it appears in
arch/loongarch/net/bpf_jit.c:814:3: error: a label can only be part of a statement and a declaration is not a statement
u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
^~~
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Eliminate the following coccicheck warning:
./arch/loongarch/include/asm/ptrace.h:32:15-21: WARNING use flexible-array member instead
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The current LoongArch kernel stack is padded as if obeying the MIPS o32
calling convention (32 bytes), signifying the port's MIPS lineage but no
longer making sense. Remove the padding for clarity.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
* A fix for a build warning in the jump_label code.
* One of the git://github -> https://github cleanups, for the SiFive
drivers.
* A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term.
* A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains.
* A fix for a runtime warning in the /proc/cpuinfo code.
-----BEGIN PGP SIGNATURE-----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=In1r
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=OG6y
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki).
- Allow hybrid sleep to use suspend-to-idle as a system suspend method
if it is the current suspend method of choice (Mario Limonciello).
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla).
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=1teO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
While reworking the archrandom handling, commit d349ab99ee ("random:
handle archrandom with multiple longs") switched to the non-early
archrandom helpers in random_init(), which broke initialization of the
entropy pool from the arm64 random generator.
Indeed at that point the arm64 CPU features, which verify that all CPUs
have compatible capabilities, are not finalized so arch_get_random_seed_longs()
is unsuccessful. Instead random_init() should use the _early functions,
which check only the boot CPU on arm64. On other architectures the
_early functions directly call the normal ones.
Fixes: d349ab99ee ("random: handle archrandom with multiple longs")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
lru_gen_add_mm() has been added within an IRQ-off region in the commit
mentioned below. The other invocations of lru_gen_add_mm() are not within
an IRQ-off region.
The invocation within IRQ-off region is problematic on PREEMPT_RT because
the function is using a spin_lock_t which must not be used within
IRQ-disabled regions.
The other invocations of lru_gen_add_mm() occur while
task_struct::alloc_lock is acquired. Move lru_gen_add_mm() after
interrupts are enabled and before task_unlock().
Link: https://lkml.kernel.org/r/20221026134830.711887-1-bigeasy@linutronix.de
Fixes: bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before the do-while loop in mtree_range_walk(), the variables next, min,
max need to be initialized. The variables last, prev_min and prev_max are
set within the loop body before they are eventually used after exiting the
loop body.
As it is a do-while loop, the loop body is executed at least once, so the
variables last, prev_min and prev_max do not need to be initialized before
the loop body.
Remove unneeded initialization of last and prev_min.
The needless initialization was reported by clang-analyzer as Dead Stores.
As the compiler already identifies these assignments as unneeded, it
optimizes the assignments away. Hence:
No functional change. No change in object code.
Link: https://lkml.kernel.org/r/20221026120029.12555-2-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wolfram Sang