Add myself as a maintainer for this new Hardware Timestamping Engine
(HTE) subsystem.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The test driver uses IRQ and GPIO lines to timestamp using HTE
subsystem. The patch also adds compilation support in Kconfig and
Makefile.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
gpiolib-cdev is extended to support hardware clock type, this
patch reflects that fact.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds new clock type for the GPIO controller which can
timestamp gpio lines in using hardware means. To expose such
functionalities to the userspace, code has been added where
during line create or set config API calls, it checks for new
clock type and if requested, calls HTE API. During line change
event, the HTE subsystem pushes timestamp data to userspace
through gpiolib-cdev.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 AON GPIO controller with the use of its internal hardware
timestamping engine (HTE), also known as GTE, can timestamp GPIO lines
through system counter. This patch implements enable/disable callbacks
for the GPIO controller. In enable call, it will set timestamp function
bit and GPIO line rising/falling edges in the config register. In
disable call, it restores the state.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some GPIO chip can provide hardware timestamp support on its GPIO lines
, in order to support that, additional API needs to be added which
can talk to both GPIO chip and HTE (hardware timestamping engine)
providers if there is any dependencies. This patch introduces optional
hooks to enable and disable hardware timestamping related features
in the GPIO controller chip.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduces HTE devicetree binding details for the HTE subsystem. It
includes examples for the consumers, binding details for the providers
and specific binding details for the Tegra194 based HTE providers.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 device has multiple HTE instances also known as GTE (Generic
Hardware Timestamping Engine) which can timestamp subset of SoC lines
and signals. This provider driver focuses on IRQ and GPIO lines and
exposes timestamping ability on those lines to the consumers through
HTE subsystem.
Also, with this patch, added:
- documentation about this provider and its capabilities at
Documentation/hte.
- Compilation support in Makefile and Kconfig
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some devices can timestamp system lines/signals/Buses in real-time
using the hardware counter or other hardware means which can give
finer granularity and help avoid jitter introduced by software
timestamping. To utilize such functionality, this patchset creates
HTE subsystem where devices can register themselves as providers so
that the consumers devices can request specific line from the
providers. The patch also adds compilation support in Makefile and
menu options in Kconfig.
The provider does following:
- Registers chip with the framework.
- Provides translation hook to convert logical line id.
- Provides enable/disable, request/release callbacks.
- Pushes timestamp data to HTE subsystem.
The consumer does following:
- Initializes line attribute.
- Gets HTE timestamp descriptor.
- Requests timestamp functionality.
- Puts HTE timestamp descriptor.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adding hte document which can help understand various APIs implemented
in HTE framework for the HTE producers and the consumers.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Rename the staging files to give them some meaning.
Just stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot paths
and also convert it into a static branch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYkmyIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qutfAQD90gbUgFMFe2akF5sKhonF5T6mm0+w
BsWqNlBEKBxmfwD+Krfpxql/PKp/gCufcIUUkYC4E6Wl9akf3eO1qQel1Ao=
=ZTn1
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
dropping rate range requests. It's best to keep various systems booting
so we'll kick this out and try again next time.
-----BEGIN PGP SIGNATURE-----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=OJT3
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
- Make the prctl() for enabling dynamic XSTATE components correct so it
adds the newly requested feature to the permission bitmap instead of
overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor cannot
emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it takes
the feature set of the fpstate buffer into account. The feature sets
can differ between host and guest buffers. Guest buffers do not contain
supervisor states. So far this was not an issue, but with enabling
PASID it needs to be handled in the buffer offset calculation and in
the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the values
early in the FPU/XSTATE code.
- Enable CONFIG_WERROR for X86.
- Make the X86 defconfigs more useful by adapting them to Y2022 reality.
-----BEGIN PGP SIGNATURE-----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=GK27
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
generalized.
-----BEGIN PGP SIGNATURE-----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=mJKF
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
-----BEGIN PGP SIGNATURE-----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=q+vI
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
This reverts commit 7dabfa2bc4. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com
Cc: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources:
socket, mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYkhUwgAKCRCyPKLppCJ+
JyjjAQCSTOHqJfrxCvt+VeZvAlZv5FVYosGBUXQTwZuWLV4LtAEA7+Q3VApPDskc
Izd4hgtR+g5ukHH5G1pgPZpCbTGnrgg=
=/yvf
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
* Documentation improvements
* Prevent module exit until all VMs are freed
* PMU Virtualization fixes
* Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
* Other miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJIGV8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO5FQgAhls4+Nu+NqId/yvvyNxr3vXq0dHI
hLlHtvzgGzZisZ7y2bNeyIpJVBDT5LCbrptPD/5eTvchVswDh0+kCVC0Uni5ugGT
tLT/Pv9Oq9e0X7aGdHRyuHIivIFDC20zIZO2DV48Lrj/+r6DafB2Fghq2XQLlBxN
p8KislvuqAAos543BPC1+Lk3dhOLuZ8qcFD8wGRlcCwjNwYaitrQ16rO04cLfUur
OwIks1I6TdI2JpLBhm6oWYVG/YnRsoo4bQE8cjdQ6yNSbwWtRpV33q7X6onw8x8K
BEeESoTnMqfaxIF/6mPl6bnDblVHFp6Xhld/vJcgeWQTdajFtuFE/K4sCA==
=xnQ6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
-----BEGIN PGP SIGNATURE-----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=F9xx
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
cros_ec_typec:
* platform/chrome: cros_ec_typec: Check for EC device - Fix a crash when using
the cros_ec_typec driver on older hardware not capable of typec commands.
* Make try power role optional.
* Mux configuration reorganization series from Prashant.
cros_ec_debugfs:
* Fix use after free. Thanks Tzung-bi.
sensorhub:
* cros_ec_sensorhub fixup - Split trace include file
misc:
* Add new mailing list for chrome-platform development.
chrome-platform@lists.linux.dev. Now with patchwork!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYkZBeAAKCRBzbaomhzOw
wuUbAP9GaC3906dMf4zucME+icojYFQSeQFMJfS0kMdKBtJROAEArsEilx5aFf7Q
PlyoaaJ7aWpLO3pnUdUNwQM0hJPLGwo=
=me9M
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
This reverts commit 6d35d04a9e.
Both Gabriel and Borislav report that this commit casues a regression
with nbd:
sysfs: cannot create duplicate filename '/dev/block/43:0'
Revert it before 5.18-rc1 and we'll investigage this separately in
due time.
Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/
Reported-by: Gabriel L. Somlo <somlo@cmu.edu>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home
Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com
Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
The performance improvement is noticeable.
Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make sure the event_mutex is properly held during dyn_event_add call.
This is required when adding dynamic events.
Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kzalloc is a memory allocation function which can return NULL when some
internal memory errors happen. It is safer to add null pointer check.
Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn
Cc: stable@vger.kernel.org
Fixes: c1a3c36017 ("proc: bootconfig: Add /proc/bootconfig to show boot config list")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e8 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: bd53cb35a3 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was decided that when TSC scaling is not supported,
the virtual MSR_AMD64_TSC_RATIO should still have the default '1.0'
value.
However in this case kvm_max_tsc_scaling_ratio is not set,
which breaks various assumptions.
Fix this by always calculating kvm_max_tsc_scaling_ratio regardless of
host support. For consistency, do the same for VMX.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Another piece of SVM spec which should be in the header file
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to wrong rebase, commit
4a204f7895 ("KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255")
moved avic spec #defines back to avic.c.
Move them back, and while at it extend AVIC_DOORBELL_PHYSICAL_ID_MASK to 12
bits as well (it will be used in nested avic)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Fixes: fb6d4d340e ("KVM: x86: emulate RDPID")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reported-by: Jim Mattson <jmattson@google.com>
Fixes: 103af0a987 ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5")
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jiapeng Chong