On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset(). This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.
As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.
This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
no surprises here: a regression fix for virmidi code refactoring,
three fixes for the new AC97 bus compat and runtime PM, and a usual
HD-audio quirk.
-----BEGIN PGP SIGNATURE-----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=381l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprises here: a regression fix for virmidi code refactoring,
three fixes for the new AC97 bus compat and runtime PM, and a usual
HD-audio quirk"
* tag 'sound-fix-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix HP Headset Mic can't record
ALSA: ac97: fix unbalanced pm_runtime_enable
ALSA: ac97: fix check of pm_runtime_get_sync failure
ALSA: ac97: fix device initialization in the compat layer
ALSA: seq: virmidi: Fix discarding the unsubscribed output
This patch will fix HP workstation Headset Mic not recording.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit c647f806b8 ("ALSA: hda - Allow multiple ADCs for mic mute LED
controls") changed the return value of the snd_hda_gen_add_micmute_led()
without actually updating the callers.
Admittedly, almost no callers actually cared about the return value.
But one call site very much did: the Dell wmi code. It would see the
registration return zero, which _used_ to mean "failed" but now means
"success", and clear the dell_micmute_led_set_func pointer.
End result: the successful registration would end up calling the Dell
code that thought it had all failed, and call through a NULL pointer.
To make matters worse, it ends up being a tail-call, and with the
retpoline sequence you don't even see the caller (dell_micmute_update())
in the stack trace, so the error ended up way less obvious than it
should have been.
Fixes: c647f806b8 "ALSA: hda - Allow multiple ADCs for mic mute LED controls"
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds exit functions for the Recon3D, and cleans up the
current exit function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device has the same issues as the HP x360 wrt the MUTE LED and
the front speakers not working. This patch fixes the MUTE LED issue,
but doesn't touch the HDA verbs. The fix for the x360 does not work
on the Spectre.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach. This will
simplify the code and make easier to find the unbalanced mutex locks.
No functional changes, but only the code readability improvement as a
preliminary work for further changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.
Adding a 10ms artificial delay before rebooting fixes the issue entirely.
Patch for Realtek codecs also adds the same amount of delay after
entering D3.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.
Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.
Now that we know that this bug is subject to multiple codecs,
fix the comment as well.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The knew->iface field is in snd_ctl_elem_iface_t, which is with
__bitwise, hence it can't be converted implicitly from integer.
Give an explicit cast for the invalid type.
Spotted by sparse:
sound/pci/hda/hda_codec.c:3280:25: warning: restricted snd_ctl_elem_iface_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use NULL for initializing the snd_kcontrol_new.tlv field, instead of
0, as warned by sparse:
sound/pci/hda/patch_ca0132.c:5519:22: warning: Using plain integer as NULL pointer
Also, the driver does the same initialization twice, once for
knew.tlv.c and another for knew.tlv.p while both point to the same
address (these are union). Drop the latter superfluous one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the generic drm_audio_component support, which will be used later
for AMD/ATI and other HD-audio HDMI codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI SSID 1558:95e1 needs the same quirk for other Clevo P950
models, too. Otherwise no sound comes out of speakers.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1101143
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the final step for more generic support of DRM audio
component. The generic audio component code is now moved to its own
file, and the symbols are renamed from snd_hac_i915_* to
snd_hdac_acomp_*, respectively. The generic code is enabled via the
new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is
kept as the super-class.
Along with the split, three new callbacks are added to audio_ops:
pin2port is for providing the conversion between the pin number and
the widget id, and master_bind/master_unbin are called at binding /
unbinding the master component, respectively. All these are optional,
but used in i915 implementation and also other later implementations.
A note about the new snd_hdac_acomp_init() function: there is a slight
difference between this and the old snd_hdac_i915_init(). The latter
(still) synchronizes with the master component binding, i.e. it
assures that the relevant DRM component gets bound when it returns, or
gives a negative error. Meanwhile the new function doesn't
synchronize but just leaves as is. It's the responsibility by the
caller's side to synchronize, or the caller may accept the
asynchronous binding on the fly.
v1->v2: Fix missing NULL check in master_bind/unbind
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio i915 binding code contains a single pointer, hdac_acomp,
for allowing the access to audio component from the master bind/unbind
callbacks. This was needed because the callbacks pass only the device
pointer and we can't guarantee the object type assigned to the drvdata
(which is free for each controller driver implementation).
And this implementation will be a problem if we support multiple
components for different DRM drivers, not only i915.
As a solution, allocate the audio component object via devres and
associate it with the given device, so that the component callbacks
can refer to it via devres_find().
The removal of the object is still done half-manually via
devres_destroy() to make the code consistent (although it may work
without the explicit call).
Also, the snd_hda_i915_register_notifier() had the reference to
hdac_acomp as well. In this patch, the corresponding code is removed
by passing hdac_bus object to the function, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing other drivers to use the DRM audio component, rename the
i915_audio_component_* with drm_audio_component_*, and split the
generic part into drm_audio_component.h. The i915 specific stuff
remains in struct i915_audio_component, which contains
drm_audio_component as the base.
The license of drm_audio_component.h is kept to MIT as same as the the
original i915_component.h.
This is a preliminary change for further development, and no
functional changes by this patch itself, merely code-split and
renames.
v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915
argument in drm_audio_component.h
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On modern laptop, there are more and more platforms
have two GPUs, and each of them maybe have audio codec
for HDMP/DP output. For some dGPU which is no output,
audio codec usually is disabled.
In currect HDA audio driver, it will set all codec as
VGA_SWITCHEROO_DIS, the audio which is binded to UMA
will be suspended if user use debugfs to contorl power
In HDA driver side, it is difficult to know which GPU
the audio has binded to. So set the bound gpu pci dev
to vga_switcheroo.
if the audio client is not the third registration, audio
id will set in vga_switcheroo enable function. if the
audio client is the last registration when vga_switcheroo
_ready() get true, we should get audio client id from bound
GPU directly.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds some required quirk when uses headset or headphone on
Panasonic CF-SZ6.
Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio mute led does not work on HP ProBook 455 G5,
this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it.
BugLink: https://bugs.launchpad.net/bugs/1781763
Reported-by: James Buren
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Except PCI_CLASS_DISPLAY_VGA, some PCI class is sometimes
PCI_CLASS_DISPLAY_3D or PCI_CLASS_DISPLAY_OTHER.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI subsystem in question for this quirk rule has been
identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the
device name appropriately.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These motherboards have Sound Core3D and apparently "support"
Recon3Di. Added to the quirk list as QUIRK_R3DI.
Issue report, PCI Subsystem ID, and testing by a contributor on
IRC who wished to remain anonymous.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have two new lenovo desktop models which need to apply the fixup of
ALC294_FIXUP_LENOVO_MIC_LOCATION, and they have the same pin cfg as
the machine with subsystem id:0x17aa3136, now use the pincfg table
to apply the fixup for them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Obtaining the runtime pm wakeref can fail, especially in a hotplug
scenario where i915.ko has been unloaded. If we do not catch the
failure, we end up with an unbalanced pm.
v2 additions by tiwai:
hdmi_present_sense() checks the return value and handle only a
negative error case and bails out only if it's really still suspended.
Also, snd_hda_power_down() is called at the error path so that the
refcount is balanced.
Along with it, the spec->pcm_lock is taken outside
hdmi_present_sense() in the caller side, so that it won't cause
deadlock at reentrace via runtime resume.
v3 fix by tiwai:
Missing linux/pm_runtime.h is included.
References: 222bde0388 ("ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When i915 component binding fails, it means that HDMI isn't applicable
anyway. Although the probe with the generic HDMI parser would still
work, it's essentially useless, hence better to be left unbound.
This patch mimics the probe_id field at failing the i915 component
binding so that the generic HDMI won't be bound after that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch can make audio controller in AMD Raven Ridge gets runtime
suspended to D3, to save ~1W power when it's not in use.
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split snd_hda_codec_new into two separate functions.
snd_hda_codec_device_init allocates memory and registers with bus.
snd_hda_codec_device_new initialializes the fields and performs
snd_device_new. This enables reuse of legacy HDA codec drivers as ASoC
codec drivers.
In addition mark some functions with EXPORT_SYMBOL_GPL so that it can
be called by ASoC wrapper around the legacy HDA driver (hdac_hda).
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The in_pm atomic in hdac_device is an important field used as a flag
as well as a refcount for PM. The existing snd_hdac_power_up/down
helpers already refer to it in the HD-audio core code, while the code
to actually setting the value (atomic_inc() / _dec()) is open-coded in
HDA legacy side, which is hard to find.
This patch adds the helper functions to set/reset the in_pm counter to
HDA core and use them in HDA legacy side, for making it clearer who /
where the PM is managed.
There is no functional changes, just code refactoring.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.
Let's unify and replace with the latter one consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More comprehensive list of model strings for ALC882 & co.
Also corrected the subsection in models.rst, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous commit for ALC662, let's give more comprehensive
list of model entries for ALC269 & co as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai