Currently we're taking power_lock at each card component for assuring
the power-up sequence, but it doesn't help anything in the
implementation at the moment: it just serializes unnecessarily the
callers, but it doesn't protect about the power state change itself.
It used to have some usefulness in the early days where we managed the
PM manually. But now the suspend/resume core procedure is beyond our
hands, and power_lock lost its meaning.
This patch drops the power_lock from allover the places.
There shouldn't be any issues by this change, as it's no helper
regarding the power state change. Rather we'll get better performance
by removing the serialization; which is the only slight concern of any
behavior change, but it can't be a showstopper, after all.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM OSS emulation issues the drain ioctl without power lock. It used
to work in the earlier kernels as the power lock was taken inside
snd_pcm_drain() itself. But since 68b4acd322 ("ALSA: pcm: Apply
power lock globally to common ioctls"), the power lock is taken
outside the function. Due to that change, the call via OSS emulation
leads to the unbalanced power lock, thus it deadlocks.
As a quick fix, just take the power lock before snd_pcm_drain() call
for OSS emulation path. A better cleanup will follow later.
Fixes: 68b4acd322 ("ALSA: pcm: Apply power lock globally to common ioctls")
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit c8da9be4a7 ("ALSA: pcm: Adjust nine function calls
together with a variable assignment") contained a badly incorrect
conversion, a "status" PCM procfs creation was replaced with the next
one. Luckily, this could be spotted easily by the kernel runtime
warning.
Fixes: c8da9be4a7 ("ALSA: pcm: Adjust nine function calls together...")
Reported-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For user-defined element set, in its initial state, TLV data is not
registered. It's firstly available when any application register it by
an additional operation. However, in current implementation, it's available
in its initial state. As a result, applications get -ENXIO to read it.
This commit controls its readability to manage info flags properly. In an
initial state, elements don't have SND_CTL_ELEM_ACCESS_TLV_READ flag. Once
TLV write operation is executed, they get the flag.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a design of user-defined element set, applications allow to change TLV
data on the set. This operation doesn't only affects to a target element,
but also to elements in the set.
This commit generates TLV event for all of elements in the set when the TLV
data is changed.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a design of ALSA control core, a set of elements is represented by
'struct snd_kcontrol' to share common attributes. The set of elements
shares TLV (Type-Length-Value) data, too.
On the other hand, in ALSA control interface/protocol for applications,
a TLV operation is committed to an element. Totally, the operation can
have sub-effect to the other elements in the set. For example, TLV_WRITE
operation is expected to change TLV data, which returns to applications.
Applications attempt to change the TLV data per element, but in the above
design, they can effect to elements in the same set.
As a default, ALSA control core has no implementation except for TLV_READ
operation. Thus, the above design looks to have no issue. However, in
kernel APIs of ALSA control component, developers can program a handler
for any request of the TLV operation. Therefore, for elements in a set
which has the handler, applications can commit TLV_WRITE and TLV_COMMAND
requests.
For the above scenario, ALSA control core assist notification. When the
handler returns positive value, the core queueing an event for a requested
element. However, this includes design defects that the event is not
queued for the other element in a set. Actually, developers can program
the handlers to keep per-element TLV data, but it depends on each driver.
As of v4.13-rc6, there's no driver in tree to utilize the notification,
except for user-defined element set. This commit delegates the notification
into each driver to prevent developers from the design defects.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix the affected source code place.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When user tries to replace the user-defined control TLV, the kernel
checks the change of its content via memcmp(). The problem is that
the kernel passes the return value from memcmp() as is. memcmp()
gives a non-zero negative value depending on the comparison result,
and this shall be recognized as an error code.
The patch covers that corner-case, return 1 properly for the changed
TLV.
Fixes: 8aa9b586e4 ("[ALSA] Control API - more robust TLV implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA control interface, applications can execute two types of request
for value of members on each element; ELEM_READ and ELEM_WRITE. In ALSA
control core, these two requests are handled within read lock of a
counting semaphore, therefore several processes can run to execute these
two requests at the same time. This has an issue because ELEM_WRITE
requests have an effect to change state of the target element. Concurrent
access should be controlled for each of ELEM_READ/ELEM_WRITE case.
This commit uses the counting semaphore as write lock for ELEM_WRITE
requests, while use it as read lock for ELEM_READ requests. The state of
a target element is maintained exclusively between ELEM_WRITE/ELEM_READ
operations.
There's a concern. If the counting semaphore is acquired for read lock
in implementations of 'struct snd_kcontrol.put()' in each driver, this
commit shall cause dead lock. As of v4.13-rc5, 'snd-mixer-oss.ko',
'snd-emu10k1.ko' and 'snd-soc-sst-atom-hifi2-platform.ko' includes codes
for read locks, but these are not in a call graph from
'struct snd_kcontrol.put(). Therefore, this commit is safe.
In current implementation, the same solution is applied for the other
operations to element; e.g. ELEM_LOCK and ELEM_UNLOCK. There's another
discussion about an overhead to maintain concurrent access to an element
during operating the other elements on the same card instance, because the
lock primitive is originally implemented to maintain a list of elements on
the card instance. There's a substantial difference between
per-element-list lock and per-element lock.
Here, let me investigate another idea to add per-element lock to maintain
the concurrent accesses with inquiry/change requests to an element. It's
not so frequent for applications to operate members on elements, while
adding a new lock primitive to structure increases memory footprint for
all of element sets somehow. Experimentally, inquiry operation is more
frequent than change operation and usage of counting semaphore for the
inquiry operation brings no blocking to the other inquiry operations. Thus
the overhead is not so critical for usual applications. For the above
reasons, in this commit, the per-element lock is not introduced.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA control core handles ELEM_READ/ELEM_WRITE requests within lock
acquisition of a counting semaphore. The lock is acquired in helper
functions in the end of call path before calling implementations of each
driver.
ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
->snd_ctl_elem_read_user()
->snd_ctl_elem_read()
->down_read(controls_rwsem)
->snd_ctl_find_id()
->struct snd_kcontrol.get()
->up_read(controls_rwsem)
ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
->snd_ctl_elem_write_user()
->snd_ctl_elem_write()
->down_read(controls_rwsem)
->snd_ctl_find_id()
->struct snd_kcontrol.put()
->up_read(controls_rwsem)
This commit moves the lock acquisition to middle of the call graph to
simplify the helper functions. As a result:
ioctl(2) with SNDRV_CTL_ELEM_READ
...
->snd_ctl_ioctl()
->snd_ctl_elem_read_user()
->down_read(controls_rwsem)
->snd_ctl_elem_read()
->snd_ctl_find_id()
->struct snd_kcontrol.get()
->up_read(controls_rwsem)
ioctl(2) with SNDRV_CTL_ELEM_WRITE
...
->snd_ctl_ioctl()
->snd_ctl_elem_write_user()
->down_read(controls_rwsem)
->snd_ctl_elem_write()
->snd_ctl_find_id()
->struct snd_kcontrol.put()
->up_read(controls_rwsem)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.
In current implementation of a handler for ELEM_WRITE request, the
function is called after releasing the semaphore for a list of elements
in the card data. This release is not necessarily needed.
This commit removes the release to call the function within the critical
section so that later commits are simple.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 4842e98f26 ("ALSA: seq: Fix race at
creating a queue") attempted to fix a race reported by syzkaller. That
fix has been described as follows:
"
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it. Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.
The fix is to reference the queue object at the right time.
"
Even with that fix in place, syzkaller reported a use-after-free error.
It specifically pointed to the last instruction "return q->queue" in
snd_seq_queue_alloc(). The pointer q is being used after kfree() has
been called on it.
It turned out that there is still a small window where a race can
happen. The window opens at
snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add()
and closes at
snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between
these two calls, a different thread could delete the queue and possibly
re-create a different queue in the same location in queue_list.
This change prevents this situation by calling snd_use_lock_use() from
snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the
caller's responsibility to call snd_use_lock_free(&q->use_lock).
Fixes: 4842e98f26 ("ALSA: seq: Fix race at creating a queue")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 0181307abc ("ALSA: seq: Reorganize kconfig and build")
rewrote the dependency of each sequencer module in a standard way, but
there was one change applied mistakenly: CONFIG_SND_SEQ_MIDI isn't
enabled properly by CONFIG_SND_RAWMIDI. I seem to have changed the
wrong one instead, CONFIG_SND_SEQ_MIDI_EMUL, which is eventually
reverse-selected by CONFIG_SND_SEQ_MIDI itself. This ended up the
lack of snd-seq-midi module as reported below.
The fix is to put def_tristate properly to CONFIG_SND_SEQ_MIDI instead
of *_MIDI_EMUL entry.
Fixes: 0181307abc ("ALSA: seq: Reorganize kconfig and build")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196633
Signed-off-by: Takashi Iwai <tiwai@suse.de>
User-defined element set registers own handler to get callbacks from TLV
ioctl handler. In the handler, execution path bifurcates depending on
requests from user space. At write request, container in given buffer is
registered to the element set, or replaced old TLV data. At the read
request, the registered data is copied to user space. The command request
is not allowed. In current implementation, function of the handler
includes codes for the two cases.
This commit adds two helper functions for these cases so that readers can
easily get the above design.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a design of ALSA control core, execution path bifurcates depending on
target element. When a set with the target element has a handler, it's
called. Else, registered buffer is copied to user space. These two
operations are apparently different. In current implementation, they're
on the same function with a condition statement. This makes it a bit hard
to understand conditions of each case.
This commit splits codes for these two cases.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At a previous commit, concurrent requests for TLV data are maintained
exclusively between read requests and write/command requests. TLV
callback handlers in each driver has no risk from concurrent access for
reference/change.
In current implementation, 'struct snd_card' has a mutex to control
concurrent accesses to user-defined element sets. This commit obsoletes it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ALSA control interface, applications can execute three types of request
for Type-Length-Value (TLV) data to a set of elements; read, write and
command. In ALSA control core, all of the requests are handled within read
lock to a counting semaphore, therefore several processes can run to access
to the data at the same time for any purposes. This has an issue because
write and command requests have side effect to change state of a set of
elements for the TLV data. Concurrent access should be controlled for each
of reference/change case.
This commit uses the counting semaphore as read lock for TLV read requests,
while use it as write lock for TLV write/command requests. The state of a
set of elements for the TLV data is maintained exclusively between read
requests and write/command requests, or between write and command requests.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Any control event is queued by a call of snd_ctl_notify(). This function
adds the event to each queue of opened file data corresponding to ALSA
control character devices. This function acquired two types of lock; a
counting semaphore for a list of the opened file data and a spinlock for
card data opened by the file. Typically, this function is called after
acquiring a counting semaphore for a list of elements in the card data.
In current implementation of TLV request handler, the function is called
after releasing the semaphore for a list of elements in the card data.
This release is not necessarily needed.
This commit removes the release to call the function within the critical
section so that later commits are simple.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks.
-----BEGIN PGP SIGNATURE-----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=tGl3
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks"
* tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add hdmi id for a Geminilake variant
ALSA: hda/realtek - New codec device ID for ALC1220
ALSA: pcm: Simplify check for dma_mmap_coherent() availability
ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA
ALSA: msnd: Optimize / harden DSP and MIDI loops
ALSA: hda/realtek - change the location for one of two front microphones
ALSA: opl4: Move inline before return type
We check the availability of dma_mmap_coherent() in hw_support_mmap()
but with an ugly ifdef of lots of arch-checks. Now we have a nice
CONFIG_ARCH_NO_COHERENT_DMA_MMAP kconfig, and this can be used
together with CONFIG_HAS_DMA check for a cleaner and more
comprehensive check.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If NO_DMA=y:
sound/core/pcm_native.o: In function `snd_pcm_lib_default_mmap':
pcm_native.c:(.text+0x144c): undefined reference to `bad_dma_ops'
pcm_native.c:(.text+0x1474): undefined reference to `dma_common_mmap'
Add a check for HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets and
2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding
Note that of-graph change may bring the conflicts with a later pull
request of devicetree, as currently found in linux-next.
-----BEGIN PGP SIGNATURE-----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=PUEh
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets
and 2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding"
* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
ALSA: hda - Fix unbalance of i915 module refcount
ASoC: Intel: Skylake: Remove driver debugfs exit
ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
ALSA: hda/realtek - Remove GPIO_MASK
ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
ALSA: pcm: add a documentation for tracepoints
ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
ASoC: Intel: Skylake: Add support to read firmware registers
ASoC: Intel: Skylake: Add sram address to sst_addr structure
ASoC: Intel: Skylake: Debugfs facility to dump module config
ASoC: Intel: Skylake: Add debugfs support
ASoC: fix semicolon.cocci warnings
ASoC: rt5645: Add quirk override by module option
ASoC: rsnd: make arrays path and cmd_case static const
ASoC: audio-graph-card: add widgets and routing for external amplifier support
ASoC: audio-graph-card: update bindings for amplifier support
ASoC: rt5665: calibration should be done before jack detection
ASoC: rsnd: constify dev_pm_ops structures.
ASoC: nau8825: change crosstalk-bypass property to bool type
...
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9781 240 8 10029 272d sound/core/pcm.o
File size After adding 'const':
text data bss dec hex filename
9813 176 8 9997 270d sound/core/pcm.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that user-space (typically alsa-lib) can specify which protocol
version it supports, we can optimize the kernel code depending on the
reported protocol version.
In this patch, we change the previous hack for enforcing the appl_ptr
sync by disabling status/control mmap. Instead of forcibly disabling
both mmaps, we disable only the control mmap when user-space declares
the supported protocol version new enough. For older user-space,
still both PCM status and control mmaps are disabled when requested by
the driver due to the compatibility reason.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have an ioctl to inform the PCM protocol version the running kernel
supports, but there is no way to know which protocol version the
user-space can understand. This lack of information caused headaches
in the past when we tried to extend the ABI. For example, because we
couldn't guarantee the validity of the reserved bytes, we had to
introduce a new ioctl SNDRV_PCM_IOCTL_STATUS_EXT for assigning a few
new fields in the formerly reserved bits. If we could know that it's
a new alsa-lib, we could assume the availability of the new fields,
thus we could have reused the existing SNDRV_PCM_IOCTL_STATUS.
In order to improve the ABI extensibility, this patch adds a new ioctl
for user-space to inform its supporting protocol version to the
kernel. By reporting the supported protocol from user-space, the
kernel can judge which feature should be provided and which not.
With the addition of the new ioctl, the PCM protocol version is bumped
to 2.0.14, too. User-space checks the kernel protocol version via
SNDRV_PCM_INFO_PVERSION, then it sets the supported version back via
SNDRV_PCM_INFO_USER_PVERSION.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently x86 platforms use the PCM status/control mmaps for
transferring the PCM status and appl_ptr between kernel and
user-spaces. The mmap is a most efficient way of communication, but
it has a drawback per its nature, namely, it can't notify the change
explicitly to kernel.
The lack of appl_ptr update notification is a problem on a few
existing drivers, but it's mostly a small issue and negligible.
However, a new type of driver that uses DSP for a deep buffer
management requires the exact position of appl_ptr for calculating the
buffer prefetch size, and the asynchronous appl_ptr update between
kernel and user-spaces becomes a significant problem for it.
How can we enforce user-space to report the appl_ptr update? The way
is relatively simple. Just by disabling the PCM control mmap, the
user-space is supposed to fall back to the mode using SYNC_PTR ioctl,
and the kernel gets control over that. This fallback mode is used in
all non-x86 platforms as default, and also in the 32bit compatible
model on all platforms including x86. It's been implemented already
over a decade, so we can say it's fairly safe and stably working.
With the help of the knowledge above, this patch introduces a new PCM
info flag SNDRV_PCM_INFO_SYNC_APPLPTR for achieving the appl_ptr sync
from user-space. When a driver sets this flag at open, the PCM status
/ control mmap is disabled, which effectively switches to SYNC_PTR
mode in user-space side.
In this version, both PCM status and control mmaps are disabled
although only the latter, control mmap, is the target. It's because
the current alsa-lib implementation supposes that both status and
control mmaps are always coupled, thus it handles a fatal error when
only one of them fails.
Of course, the disablement of the status/control mmaps may bring a
slight performance overhead. Thus, as of now, this should be used
only for the dedicated devices that deserves.
Note that the disablement of mmap is a sort of workaround. In the
later patch, we'll introduce the way to identify the protocol version
alsa-lib supports, and keep mmap working while the sync_ptr is
performed together.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ALSA PCM core refers to the appl_ptr value stored on the mmapped
page that is shared between kernel and user-space. Although the
reference is performed in the PCM stream lock, it doesn't guarantee
the atomic access when the value gets updated concurrently from the
user-space on another CPU.
In most of codes, this is no big problem, but still there are a few
places that may result in slight inconsistencies because they access
runtime->control->appl_ptr multiple times; that is, the second read
might be a different value from the first value. It can be even
backward or jumping, as we have no control for it. Hence, the
calculation may give an unexpected value. Luckily, there is no
security vulnerability by that, as far as I've checked. But still we
should address it.
This patch tries to reduce such possible cases. The fix is simple --
we just read once, store it to a local variable and use it for the
rest calculations. The READ_ONCE() macro is used for it in order to
avoid the ill-effect by possible compiler optimizations.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The standard PCM chmap helper callbacks treat the NULL info->chmap as
a fatal error and spews the kernel warning with stack trace when
CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be
always static and non-NULL. But, as the recent addition of Intel LPE
audio driver shows, the chmap content may vary dynamically, and it can
be even NULL when disconnected. The user still sees the kernel
warning unnecessarily.
For clearing such a confusion, this patch simply removes the
snd_BUG_ON() in each place, just returns an error without warning.
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests
from ALSA PCM core. These requests are internal purpose in kernel land.
Usually common set of operations are used for it.
SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment,
it has been obsoleted in the old days.
We can see old releases in ftp.alsa-project.org. The command was firstly
introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to
fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release,
this was obsoleted by the other commands for ioctl(2) such as
SNDRV_PCM_IOCTL_CHANNEL_INFO.
This commit removes the long-abandoned command, bye.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We call ack callback whenever appl_ptr gets updated via
pcm_lib_apply_appl_ptr(). There are various code paths to call this
function. A part of them are for read/write/forward/rewind, where the
appl_ptr is always changed and thus the call of ack is mandatory.
OTOH, another part of code paths are from the explicit user call,
e.g. via SYNC_PTR ioctl. There, we may receive the same appl_ptr
value, and in such a case, calling ack is obviously superfluous.
This patch adds the check of the given appl_ptr value, and returns
immediately if it's no real update.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Calling PREPARE ioctl to the stream in either PAUSED or SUSPENDED
state may confuse some drivers that don't handle the state properly.
Instead of fixing each driver, PCM core should take care of the proper
state change before actually trying to (re-)prepare the stream.
Namely, when the stream is in PAUSED state, it triggers PAUSE_RELEASE,
and when in SUSPENDED state, it triggers STOP, before calling prepare
callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, the PCM core refuses DROP ioctl when the stream in the
suspended state. This was basically to avoid the invalid state change
*during* the suspend. But since we protect the power change globally
in the common PCM ioctl caller side, it's guaranteed that
snd_pcm_drop() is called at the right power state. So we can assume
that the drop of stream is safe immediately after SUSPENDED state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All PCM common ioctls should run only in the powered up state, but
currently only a few ioctls do the proper snd_power_lock() and
snd_power_wait() invocations. Instead of adding to each place, do it
commonly in the caller side, so that all these ioctls are assured to
be operated at the power up state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_pcm_action_lock_irq() helper instead of open coding.
No functional change.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As long as I know, in userspace, '%c' format on printing format for
tracepoint is replaced with '>c<' by existent tracing program; i.g.
'perf-trace' and 'trace-cmd'. This is inconvenient.
This commit replaces the format with '%s'. The length of letters in the
format string is not changed, thus this commit doesn't increase object
size.
In theory, I should work for improvements of these tracing programs, but
here I'd like to save my time to work for the other projects.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In design of ALSA PCM core, status and control data for runtime of ALSA
PCM substream are shared between kernel/user spaces by page frame
mapping with read-only attribute. Both of hardware-side and
application-side position on PCM buffer are maintained as a part of
the status data. In a view of ALSA PCM application, these two positions
can be updated by executing ioctl(2) with some commands.
There's an event of tracepoint for hardware-side position; 'hwptr'.
On the other hand, no events for application-side position. This commit
adds a new event for this purpose; 'applptr'. When the application-side
position is changed in kernel space, this event is probed with useful
information for developers.
I note that the event is not probed for all of ALSA PCM applications, When
applications are written by read/write programming scenario, the event is
surely probed. The applications execute ioctl(2) with
SNDRV_PCM_IOCTL_[READ|WRITE][N/I]_FRAMES to read/write any PCM frame, then
ALSA PCM core updates the application-side position in kernel land.
However, when applications are written by mmap programming scenario, if
maintaining the application side position in kernel space accurately,
applications should voluntarily execute ioctl(2) with
SNDRV_PCM_IOCTL_SYNC_PTR to commit the number of handled PCM frames. If
not voluntarily, the application-side position is not changed, thus the
added event is not probed.
There's a loophole, using architectures to which ALSA PCM core judges
non cache coherent. In this case, the status and control data is not mapped
into processe's VMA for any applications. Userland library, alsa-lib, is
programmed for this case. It executes ioctl(2) with
SNDRV_PCM_IOCTL_SYNC_PTR command every time to requiring the status and
control data.
ARM is such an architecture. Below is an example with serial sound interface
(ssi) on i.mx6 quad core SoC. I use v4.1 kernel released by fsl-community
with patches from VIA Tech. Inc. for VAB820, and my backport patches for
relevant features for this patchset. I use Ubuntu 17.04 from
ports.ubuntu.com as user land for armhf architecture.
$ aplay -v -M -D hw:imx6vab820sgtl5,0 /dev/urandom -f S16_LE -r 48000 --period-size=128 --buffer-size=256
Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Hardware PCM card 0 'imx6-vab820-sgtl5000' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 256
period_size : 128
period_time : 2666
tstamp_mode : NONE
tstamp_type : MONOTONIC
period_step : 1
avail_min : 128
period_event : 0
start_threshold : 256
stop_threshold : 256
silence_threshold: 0
silence_size : 0
boundary : 1073741824
appl_ptr : 0
hw_ptr : 0
mmap_area[0] = 0x76f98000,0,16 (16)
$ trace-cmd record -e snd_pcm:hwptr -e snd_pcm:applptr
$ trace-cmd report
...
60.208495: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256
60.208633: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256
60.210022: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1536, base=1536, period=128, buf=256
60.210202: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210344: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256
60.210348: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210486: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210626: applptr: pcmC0D0p/sub0: prev=1792, curr=1920, avail=0, period=128, buf=256
60.211002: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.211142: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256
60.211146: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.211287: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.212690: hwptr: pcmC0D0p/sub0: IRQ: pos=0, old=1664, base=1536, period=128, buf=256
60.212866: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.212999: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256
60.213003: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.213135: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.213276: applptr: pcmC0D0p/sub0: prev=1920, curr=2048, avail=0, period=128, buf=256
60.213654: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.213796: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256
60.213800: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.213937: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.215356: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1792, base=1792, period=128, buf=256
60.215542: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215679: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1920, base=1792, period=128, buf=256
60.215683: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215813: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215947: applptr: pcmC0D0p/sub0: prev=2048, curr=2176, avail=0, period=128, buf=256
...
We can surely see 'applptr' event is probed even if the application run
for mmap programming scenario ('-M' option and 'hw' plugin). Below is a
result of strace:
02:44:15.886382 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887203 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.887471 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887637 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887805 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887969 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.888132 read(3, "..."..., 256) = 256
02:44:15.889040 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889221 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889431 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889606 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.889833 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889998 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.890164 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891048 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891228 read(3, "..."..., 256) = 256
02:44:15.891497 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891661 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891829 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891991 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.893007 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
We can see 7 calls of ioctl(2) with SNDRV_PCM_IOCTL_SYNC_PTR per loop with
call of poll(2). 128 PCM frames are transferred per loop of one poll(2),
because the PCM substream is configured with S16_LE format and 1 channel
(2 byte * 1 * 128 = 256 bytes). This equals to the size of period of PCM
buffer. Comparing to the probed data, one of the 7 calls of ioctl(2) is
actually used to commit the number of copied PCM frames to kernel space.
The other calls are just used to check runtime status of PCM substream;
e.g. XRUN.
The tracepoint event is useful to investigate this case. I note that below
modules are related to the above sample.
* snd-soc-dummy.ko
* snd-soc-imx-sgtl5000.ko
* snd-soc-fsl-ssi.ko
* snd-soc-imx-pcm-dma.ko
* snd-soc-sgtl5000.ko
My additional note is lock acquisition. The event is probed under acquiring
PCM stream lock. This means that calculation in the event is free from
any hardware events.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of recent work, ALSA PCM core got some arrangements to handle
application-side position on PCM buffer. However, relevant codes still
disperse to two translation units
This commit unifies these codes into a helper function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand. In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module. We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.
However, this is basically a overshoot. The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.
This patch achieves that by rewriting Kconfig slightly. Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
select SND_SEQ_DEVICE if SND_SEQUENCER != n
Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.
Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.
Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, trace events are probed even if corresponding parameter is
not actually changed. This is inconvenient.
This commit improves the behaviour.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When refining mask/interval parameters, helper functions can return error
code. This error is not handled immediately. This seems to return
parameters to userspace applications in its meddle of processing.
However, in general, when receiving error from system calls, the
application might not handle argument buffer. It's reasonable to
judge the above design as superfluity.
This commit handles the error immediately.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.
The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig. OK, that's easy.
The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module. The driver that requires such sequencer components select
exclusively the kconfig items. This is more straightforward and
standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.
This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in. Essentially, it's just a few simple
changes in Kconfig and Makefile. Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED(). But that's all.
You might wonder how about the dependency: right, it can be messy, but
it still works. Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand. So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently CONFIG_SND_OSSEMUL is selected by each config like
CONFIG_SND_PCM_OSS. But, as see in the raw MIDI code that is built
conditionally with CONFIG_SND_OSSEMUL, we should rather make
CONFIG_SND_OSSEMUL user-selectable as the top kconfig item, and leave
the rest depending on it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the same print format of snd_pcm_debug_name() for userspace tracing
program.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Results of ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE and
SNDRV_PCM_IOCTL_HW_PARAMS are different, because the latter has single
value for several parameters; e.g. channels of PCM substream. Selection
of the single value is done independently of application of constraints.
It's helpful for developers to trace the selection process.
This commit adds tracepoints to snd_pcm_hw_params_choose() for the
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As of v4.12, snd_pcm_hw_params_choose() is just called in a process
context of ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS. The function locates
in a different file, which has no tracepoints.
This commit moves the function to a file with the tracepoints for later
commit.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When drivers register no flags about information of PCM hardware, ALSA
PCM core fixups it roughly. Currently, this operation places in a
function snd_pcm_hw_refine(). It can be moved to a function
fixup_unreferenced_params() because it doesn't affects operations
between these two functions.
This idea is better to bundle codes with similar purposes and this commit
achieves it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A structure for parameters of PCM runtime has parameters which are
not classified as mask/interval type. They are decided only when
corresponding normal parameters have unique values.
* struct snd_pcm_hw_params.msbits
* struct snd_pcm_hw_params.rate_num
* struct snd_pcm_hw_params.rate_den
* struct snd_pcm_hw_params.fifo_size
Current implementation of hw_params ioctl sometimes doesn't decide these
parameters even if corresponding parameters are fixed, because these
parameters are evaluated before a call of snd_pcm_hw_params_choose().
This commit adds a helper function to process the parameters and call it
in proper positions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To fixup some parameters, ALSA PCM core refers the other parameters as
constants. There're some macros for this purpose.
This commit replaces codes with them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers add rules of parameters to runtime of PCM substream, when
applications open ALSA PCM character device. When applications call
ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE or SNDRV_PCM_IOCTL_HW_PARAMS, the
rules are applied to the parameters and return the result to user space.
The rule can have dependency between parameters. Additionally, it can have
condition flags about application of rules. Userspace applications can
indicate the flags to suppress change of parameters.
This commit attempts to describe the mechanism.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A commit 8bea869c5e ("ALSA: PCM midlevel: improve fifo_size handling")
allows drivers to implement calculation of fifo size in parameter
structure. This calculation runs only when two of the other parameters
have single value.
In ALSA PCM core, there're some helper functions for the case. This commit
applies the functions instead of value comparison.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit modifies current for readability in below aspects:
- use bool type variable instead of int type variable assigned to 0/1
- move variable definition from loop to top of the function definition
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A local variable is used to judge whether a parameter should be handled
due to reverse dependency of the other rules. However, this can be
obsoleted by check of a sentinel in dependency array.
This commit removes the local variable and check the sentinel to reduce
stack usage.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a process to calculate parameters of PCM substream, application of all
rules is iterated several times till parameter dependencies are satisfied.
In current implementation, two loops are used for the design, however this
brings two-level indentation and decline readability.
This commit attempts to reduce the indentation by using goto statement,
instead of outer while loop.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of rules to parameters of PCM substream is done in a call of
snd_pcm_hw_refine(), while the function includes much codes and is not
enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of constraints to interval-type parameters for PCM substream
is done in a call of snd_pcm_hw_refine(), while the function includes
much codes and is not enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Application of constraints to mask-type parameters for PCM substream is
done in a call of snd_pcm_hw_refine(), while the function includes much
codes and is not enough friendly to readers.
This commit splits the codes to a separated function so that readers can
get it easily. I leave desicion into compilers to merge the function into
its callee.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a previous commit, tracepoints are added for PCM parameter processing.
As long as I know, this implementation increases size of relocatable
object by 35%. For vendors who are conscious of memory footprint, it
brings apparent disadvantage.
This commit utilizes CONFIG_SND_DEBUG configuration to enable/disable the
tracepoints.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When working for devices which support configurable modes for its data
transmission or which consists of several components, developers are
likely to use rules of parameters of PCM substream. However, there's no
infrastructure to assist their work.
In old days, ALSA PCM core got a local 'RULES_DEBUG' macro to debug
refinement of parameters for PCM substream. Although this is merely a
makeshift. With some modifications, we get the infrastructure.
This commit is for the purpose. Refinement of mask/interval type of
PCM parameters is probed as tracepoint events as 'hw_mask_param' and
'hw_interval_param' on existent 'snd_pcm' subsystem.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For accessing the snd_timer_user queue indices, we take tu->qlock.
But it's forgotten in a couple of places.
The one in snd_timer_user_params() should be safe without the
spinlock as the timer is already stopped. But it's better for
consistency.
The one in poll is just a read-out, so it's not inevitably needed, but
it'd be good to make the result consistent, too.
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA timer may reallocate the user queue upon request, and it happens
at three places for now: at opening, at SNDRV_TIMER_IOCTL_PARAMS, and
at SNDRV_TIMER_IOCTL_SELECT. However, the last one,
snd_timer_user_tselect(), doesn't need to reallocate the buffer since
it doesn't change the queue size. It does just because tu->tread
might have been changed before starting the timer.
Instead of *_SELECT ioctl, we should reallocate the queue at
SNDRV_TIMER_IOCTL_TREAD; then the timer is guaranteed to be stopped,
thus we can reassign the buffer more safely.
This patch implements that with a slight code refactoring.
Essentially, the patch achieves:
- Introduce realloc_user_queue() for (re-)allocating the ring buffer,
and call it from all places. Also, realloc_user_queue() uses
kcalloc() for avoiding possible leaks.
- Add the buffer reallocation at SNDRV_TIMER_IOCTL_TREAD. When it
fails, tu->tread is restored to the old value, too.
- Drop the buffer reallocation at snd_timer_user_tselect().
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_timer_user_tselect() reallocates the queue buffer dynamically, but
it forgot to reset its indices. Since the read may happen
concurrently with ioctl and snd_timer_user_tselect() allocates the
buffer via kmalloc(), this may lead to the leak of uninitialized
kernel-space data, as spotted via KMSAN:
BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10
CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x143/0x1b0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086
copy_to_user ./arch/x86/include/asm/uaccess.h:725
snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004
do_loop_readv_writev fs/read_write.c:716
__do_readv_writev+0x94c/0x1380 fs/read_write.c:864
do_readv_writev fs/read_write.c:894
vfs_readv fs/read_write.c:908
do_readv+0x52a/0x5d0 fs/read_write.c:934
SYSC_readv+0xb6/0xd0 fs/read_write.c:1021
SyS_readv+0x87/0xb0 fs/read_write.c:1018
This patch adds the missing reset of queue indices. Together with the
previous fix for the ioctl/read race, we cover the whole problem.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The read from ALSA timer device, the function snd_timer_user_tread(),
may access to an uninitialized struct snd_timer_user fields when the
read is concurrently performed while the ioctl like
snd_timer_user_tselect() is invoked. We have already fixed the races
among ioctls via a mutex, but we seem to have forgotten the race
between read vs ioctl.
This patch simply applies (more exactly extends the already applied
range of) tu->ioctl_lock in snd_timer_user_tread() for closing the
race window.
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_pcm_oss_writev3() and snd_pcm_oss_readv3() are used only in
io.c with CONFIG_SND_PCM_OSS_PLUGINS=y. Add an ifdef to reduce the
build of these functions.
Along with it, since they are called always for in-kernel copy, reduce
the argument and call snd_pcm_kernel_writev() and *_readv() directly
instead.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the last-standing one: kill the set_fs() usage in PCM OSS
layer by replacing with the new API functions to deal with the direct
in-kernel buffer copying.
The code to fill the silence can be replaced even to a one-liner to
pass NULL buffer instead of the manual copying.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all materials are ready, let's allow the direct in-kernel
read/write, i.e. a kernel-space buffer is passed for read or write,
instead of the normal user-space buffer. This feature is used by OSS
layer and UAC1 driver, for example.
The __snd_pcm_lib_xfer() takes in_kernel argument that indicates the
in-kernel buffer copy. When this flag is set, another transfer code
is used. It's either via copy_kernel PCM ops or the normal memcpy(),
depending on the driver setup.
As external API, snd_pcm_kernel_read(), *_write() and other variants
are provided.
That's all. This support is really simple because of the code
refactoring until now.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both __snd_pcm_lib_read() and __snd_pcm_write() functions have almost
the same code to loop over samples. For simplification, this patch
unifies both as the single helper, __snd_pcm_lib_xfer().
Other than that, there should be no functional change by this patch.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch proceeds more abstraction of PCM read/write loop codes.
For both interleaved and non-interleaved transfers, the same copy or
silence transfer code (which is defined as pcm_transfer_f) is used
now. This became possible since we switched to byte size to copy_*
and fill_silence ops argument instead of frames.
And, for both read and write, we can use the same copy function (which
is defined as pcm_copy_f), just depending on whether interleaved or
non-interleaved mode.
The transfer function is determined at the beginning of the loop,
depending on whether the driver gives the specific copy ops or it's
the standard read/write.
Another bonus by this change is that we now guarantee the silencing
behavior when NULL buffer is passed to write helpers. It'll simplify
some codes later.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make snd_pcm_lib_read() and *_write() static inline functions that
call the common helper functions directly. This reduces a slight
amount of codes, and at the same time, it's a preparation for the
further cleanups / fixes.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just shuffle the codes, without any change otherwise.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all users of old copy and silence ops have been converted to
the new PCM ops, the old stuff can be retired and go away.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For supporting the explicit in-kernel copy of PCM buffer data, and
also for further code refactoring, three new PCM ops, copy_user,
copy_kernel and fill_silence, are introduced. The old copy and
silence ops will be deprecated and removed later once when all callers
are converted.
The copy_kernel ops is the new one, and it's supposed to transfer the
PCM data from the given kernel buffer to the hardware ring-buffer (or
vice-versa depending on the stream direction), while the copy_user ops
is equivalent with the former copy ops, to transfer the data from the
user-space buffer.
The major difference of the new copy_* and fill_silence ops from the
previous ops is that the new ops take bytes instead of frames for size
and position arguments. It has two merits: first, it allows the
callback implementation often simpler (just call directly memcpy() &
co), and second, it may unify the implementations of both interleaved
and non-interleaved cases, as we'll see in the later patch.
As of this stage, copy_kernel ops isn't referred yet, but only
copy_user is used.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to include pcm_local.h to clean up some smatch warnings:
symbol 'snd_pcm_timer_done' was not declared. Should it be static?
symbol 'snd_pcm_timer_init' was not declared. Should it be static?
symbol 'snd_pcm_timer_resolution_change' was not declared. Should
it be static?
Also remove some extraneous tabs on empty lines and replace space
intentation with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Cross compiled these files:
sound/aoa/codecs/tas.c - powerpc
sound/mips/{hal2.c/sgio2audio.c} - mips
sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc
sound/soc/sh/siu_dai.c - sh
Could not find an architecture to compile sound/sh/aica.c.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several files are used to construct PCM core module, a.k.a snd-pcm.
Although available APIs are described in 'include/sound/pcm.h', some of
them are not exported as symbols in kernel space. Such APIs are just for
module local usage.
This commit adds module local header file and move some function prototypes
into it so that scopes of them are controlled properly and developers
get no confusion from unavailable symbols.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the ack callback is supposed to be called at each appl_ptr or
hw_ptr update, we missed a few opportunities: namely, forward, rewind
and sync_ptr.
Formerly calling ack at rewind may have leaded to unexpected results
due to the forgotten negative appl_ptr update in indirect-PCM helper,
which is the major user of the PCM ack callback. But now we fixed
this oversights, thus we can call ack callback safely even at rewind
callback -- of course with the proper handling of the error from the
callback.
This patch adds the calls of ack callback in the places mentioned in
the above.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In current implementation of ALSA control core, list operation has
a limitation to handle 16384 entries at once. This seems due to
allocation in kernel space to copy data from user space.
With a commit 53e7bf4525 ("ALSA: control: Simplify snd_ctl_elem_list()
implementation"), for the operation, ALSA control core copies data
into user space directly. No need to care of kernel spaces anymore.
This commit purges the limitation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used to use kmalloc (more exactly, krealloc()) for creating and
growing the temporary buffer for text proc write. It can grow up to
16kB, and it's already a bit doubtful whether it's always safe to use
kmalloc(). With the recent addition of kvmalloc(), we can have a
better chance for succeed of memory allocation, so let's switch to
that new API.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM core code has a few usages of set_fs(), mostly for two codepaths:
- The DELAY ioctl call from pcm_compat.c
- The ioctl wrapper in kernel context for PCM OSS and other
This patch removes the set_fs() usage in these places by a slight code
refactoring. For the former point, snd_pcm_delay() is changed to
return the value directly instead of putting the value to the given
address. Each caller stores the result in an appropriate manner.
For fixing the latter, snd_pcm_lib_kernel_ioctl() is changed to call
the functions directly as well. For achieving it, now the function
accepts only the limited set of ioctls that have been used, so far.
The primary user of this function is the PCM OSS layer, and the only
other user is USB UAC1 gadget driver. Both drivers don't need the
full set of ioctls.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch simplifies the code of snd_ctl_elem_list() in the following
ways:
- Avoid a vmalloc() temporary buffer but do copy in each iteration;
the vmalloc buffer was introduced at the time we took the spinlock
for the ctl element management.
- Use the standard list_for_each_entry() macro
- Merge two loops into one;
it used to be a loop for skipping until offset becomes zero and
another loop to copy the data. They can be folded into a single
loop easily.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Factor out the common codes in snd_pcm_*_forward() and *_rewind()
functions to simplify the codes. No functional changes.
Reviewd-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mostly same codes for checking the current PCM state and calling
hwsync are found in a few places. This patch simplifies them by
creating a common helper function.
It also fixes a couple of cases where we missed the proper state check
(e.g. PAUSED state wasn't handled in rewind and snd_pcm_hwsync()),
too.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only one of the two declarations has the const modifier in the
argument list, so we get a warning when CONFIG_SND_PCM_OSS_PLUGINS
is disabled:
sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_change_params':
sound/core/oss/pcm_oss.c:898:47: error: passing argument 2 of 'snd_pcm_plug_slave_format' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
This makes the two declarations match again.
Fixes: e76bf3c4b4 ("ALSA: pcm/oss: refer to parameters instead of copying to reduce usage of kernel stack")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recent compilers produce a harmless warning for the new pcm_call_notify()
macro when CONFIG_SND_PCM_OSS is disabled:
sound/core/pcm.c: In function 'snd_pcm_free':
sound/core/pcm.c:905:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
This turns the empty macro into a 'do {} while (0)' statement to avoid
the warning.
Fixes: 58f30d650c ("ALSA: pcm: Build pcm notifier code conditionally")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a function snd_pcm_hw_params_choose(), target parameters are arranged
into a table. Though each entry of this table is read-only, they don't
have const qualifier.
This commit adds the qualifier.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some functions in compatibility layer for Open Sound System interface has
local variable to copy some parameters in runtime of PCM substream, while
this can be replaced with reference of pointers to parameter itself. This
brings an advantage to reduce usage of kernel stack.
This commit applies this idea.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA pcm core has hw_param_interval_c() to pick up parameter with const
qualifier for safe programming.
This commit applies it to the cases.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's a read-only table for each sampling rate, while it doesn't have
const qualifier and can be modified.
This commit add the qualifier. As a result, a symbol for the table
moves from .data section to .rodata.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM notifier code is used only by OSS emulation layer, so we can
build it conditionally for reducing the size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_use_lock_sync() (thus its implementation
snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of
the sync loop. It was introduced from the beginning, just to be
"safer", in terms of avoiding the stupid bugs.
However, as Ben Hutchings suggested, this timeout rather introduces a
potential leak or use-after-free that was apparently fixed by the
commit 2d7d54002e ("ALSA: seq: Fix race during FIFO resize"):
for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() ->
copy_from_user() could block for a long time, and snd_use_lock_sync()
goes timeout and still leaves the cell at releasing the pool.
For fixing such a problem, we remove the break by the timeout while
still keeping the warning.
Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "r1" struct has memory holes. We clear it with memset on one path
where it is used but not the other. Let's just memset it at the start
of the function so it's always safe.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We just checked "id.card < 0" on the lines before so we know it's not
true here. We can delete that check.
Also checkpatch.pl complains about some extra curly braces so we may as
well fix that while we're at it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a new event is queued while processing to resize the FIFO in
snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool
that is being queued gets removed. For avoiding this race, we need to
close the pool to be deleted and sync its usage before actually
deleting it.
The issue was spotted by syzkaller.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When snd_seq_pool_done() is called, it marks the closing flag to
refuse the further cell insertions. But snd_seq_pool_done() itself
doesn't clear the cells but just waits until all cells are cleared by
the caller side. That is, it's racy, and this leads to the endless
stall as syzkaller spotted.
This patch addresses the racy by splitting the setup of pool->closing
flag out of snd_seq_pool_done(), and calling it properly before
snd_seq_pool_done().
BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few last-minute fixes for rc1:
- ALSA core timer and sequencer fixes for bugs spotted by syzkaller
- A couple of trivial HD-audio fixups
- Additional PCI / codec IDs for Intel Geminilake
- Fixes for CT-XFi DMA mask bugs
-----BEGIN PGP SIGNATURE-----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=hOYM
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few last-minute fixes for rc1:
- ALSA core timer and sequencer fixes for bugs spotted by syzkaller
- a couple of trivial HD-audio fixups
- additional PCI / codec IDs for Intel Geminilake
- fixes for CT-XFi DMA mask bugs"
* tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix link corruption by event error handling
ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
ALSA: ctxfi: Fallback DMA mask to 32bit
ALSA: timer: Reject user params with too small ticks
ALSA: hda: Add Geminilake HDMI codec ID
ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
ALSA: hda - Add Geminilake PCI ID
The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list. When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.
Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.
This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback(). Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.
For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms. When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a sequencer queue is created in snd_seq_queue_alloc(),it adds the
new queue element to the public list before referencing it. Thus the
queue might be deleted before the call of snd_seq_queue_use(), and it
results in the use-after-free error, as spotted by syzkaller.
The fix is to reference the queue object at the right time.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_pool_done() syncs with closing of all opened threads, but it
aborts the wait loop with a timeout, and proceeds to the release
resource even if not all threads have been closed. The timeout was 5
seconds, and if you run a crazy stuff, it can exceed easily, and may
result in the access of the invalid memory address -- this is what
syzkaller detected in a bug report.
As a fix, let the code graduate from naiveness, simply remove the loop
timeout.
BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi,
we can constify the definitions.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make snd_rawmidi_substream.ops to be a const pointer to be safer and
allow more optimization. The patches to constify each rawmidi ops
will follow.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
No dramatic changes are found in this development cycle, but as usual,
many commits are applied in a wide range of drivers.
Most of big changes are in ASoC, where a few bits of framework work
and quite a lot of cleanups and improvements to existing code have
been done. The rest are usual stuff, a few HD-audio and USB-audio
quirks and fixes, as well as the drop of kthread usages in the whole
subsystem.
Below are some highlights:
ASoC:
- Support for stereo DAPM controls
- Some initial work on the of-graph sound card
- regmap conversions of the remaining AC'97 drivers
- A new version of the topology ABI; this should be backward compatible
- Updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
Intel skylake, atom-sst
- New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
Realtek RT5665
USB-audio:
- Yet another race fix at disconnection
- Tolerated packet size calculation for some Android devices
- Quirks for Axe-Fx II, QuickCam, TEAC 501/503
HD-audio:
- Improvement of Dell pin fixup mapping
- Quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic
Misc:
- Replace all kthread usages with simple works
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=WZeb
-----END PGP SIGNATURE-----
Merge tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No dramatic changes are found in this development cycle, but as usual,
many commits are applied in a wide range of drivers.
Most of big changes are in ASoC, where a few bits of framework work
and quite a lot of cleanups and improvements to existing code have
been done. The rest are usual stuff, a few HD-audio and USB-audio
quirks and fixes, as well as the drop of kthread usages in the whole
subsystem.
Below are some highlights:
ASoC:
- support for stereo DAPM controls
- some initial work on the of-graph sound card
- regmap conversions of the remaining AC'97 drivers
- a new version of the topology ABI; this should be backward
compatible
- updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
Intel skylake, atom-sst
- new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
Realtek RT5665
USB-audio:
- yet another race fix at disconnection
- tolerated packet size calculation for some Android devices
- quirks for Axe-Fx II, QuickCam, TEAC 501/503
HD-audio:
- improvement of Dell pin fixup mapping
- quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic
Misc:
- replace all kthread usages with simple works"
* tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits)
ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
ALSA: usb-audio: Eliminate noise at the start of DSD playback.
ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC
ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
ASoC: topology: avoid uninitialized kcontrol_type
ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define
ASoC: zte: spdif and i2s drivers are not zx296702 specific
ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting
ASoC: rsnd: enable/disable ADG when suspend/resume timing
ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
ALSA: cs46xx: add a new line
ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
ASoC: nau8825: disable sinc filter for high THD of ADC
ALSA: usb-audio: more tolerant packetsize
ALSA: usb-audio: avoid setting of sample rate multiple times on bus
ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
...
Commit 4bcc595ccd ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message. The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.
This patch allows to copy only the real message level. We should ignore
KERN_CONT because <filename:line> is added for each message. By other
words, we want to know where each piece of the line comes from.
[pmladek@suse.com: fix a check of the valid message level]
Link: http://lkml.kernel.org/r/20161111183444.GE2145@dhcp128.suse.cz
Link: http://lkml.kernel.org/r/1478695291-12169-5-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the ALSA proc handler allows read or write even if the proc
file were write-only or read-only. It's mostly harmless, does thing
but allocating memory and ignores the input/output. But it doesn't
tell user about the invalid use, and it's confusing and inconsistent
in comparison with other proc files.
This patch adds some sanity checks and let the proc handler returning
an -EIO error when the invalid read/write is performed.
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA proc handler allows currently the write in the unlimited size
until kmalloc() fails. But basically the write is supposed to be only
for small inputs, mostly for one line inputs, and we don't have to
handle too large sizes at all. Since the kmalloc error results in the
kernel warning, it's better to limit the size beforehand.
This patch adds the limit of 16kB, which must be large enough for the
currently existing code.
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent rewrite of the sequencer time accounting using timespec64
in the commit [3915bf294652: ALSA: seq_timer: use monotonic times
internally] introduced a bad regression. Namely, the time reported
back doesn't increase but goes back and forth.
The culprit was obvious: the delta is stored to the result (cur_time =
delta), instead of adding the delta (cur_time += delta)!
Let's fix it.
Fixes: 3915bf2946 ('ALSA: seq_timer: use monotonic times internally')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177571
Reported-by: Yves Guillemot <yc.guillemot@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is a fix for Linux 4.9-rc1.
In former commit, a function call of compatibility layer for ALSA sequencer
core was obsoleted by an alternative. Although, the alternative gets a
pointer to kernel stack due to mis-programming. As a result, ALSA sequencer
core unexpectedly refers over kernel stack.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8ce8eb601c ("ALSA: seq: add an alternative way to handle ioctl requests")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a missing \n in a pr_debug message and move the \n to the end
of a pr_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When checking value of request for copy operation, current implementation
compares shifted value to macros, while these macros are already shifted.
As a result, it never performs to copy from/to user space.
This commit fixes the bug.
Fixes: 8ce8eb601c71('ALSA: seq: add an alternative way to handle ioctl requests'
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex. This was actually triggered by
syzkaller, as Dmitry Vyukov reported:
======================================================
[ INFO: possible circular locking dependency detected ]
4.8.0-rc1+ #11 Not tainted
-------------------------------------------------------
syz-executor/7154 is trying to acquire lock:
(register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
but task is already holding lock:
(&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&grp->list_mutex){++++.+}:
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
[< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
[<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
[<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
[<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
[<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
[< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
[<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
[<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
[<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
[< inline >] __snd_device_register sound/core/device.c:162
[<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
[<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
[<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
[<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
......
-> #0 (register_mutex#5){+.+.+.}:
[< inline >] check_prev_add kernel/locking/lockdep.c:1829
[< inline >] check_prevs_add kernel/locking/lockdep.c:1939
[< inline >] validate_chain kernel/locking/lockdep.c:2266
[<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[< inline >] __mutex_lock_common kernel/locking/mutex.c:521
[<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
[<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
[<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
[< inline >] subscribe_port sound/core/seq/seq_ports.c:427
[<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
[<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
[<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
[<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
[<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
[<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
[<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
[<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
[<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
[<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
......
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&grp->list_mutex);
lock(register_mutex#5);
lock(&grp->list_mutex);
lock(register_mutex#5);
*** DEADLOCK ***
======================================================
The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a user timer instance is continued without the explicit start
beforehand, the system gets eventually zero-division error like:
divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003c9b2280 task.stack: ffff880027280000
RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195
RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62
Call Trace:
<IRQ>
[< inline >] __run_hrtimer kernel/time/hrtimer.c:1238
[<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302
[<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336
[<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933
[<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957
[<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487
<EOI>
.....
Although a similar issue was spotted and a fix patch was merged in
commit [6b760bb2c63a: ALSA: timer: fix division by zero after
SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of
iceberg.
In this patch, we fix the issue a bit more drastically. Basically the
continue of an uninitialized timer is supposed to be a fresh start, so
we do it for user timers. For the direct snd_timer_continue() call,
there is no way to pass the initial tick value, so we kick out for the
uninitialized case.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the stream is in suspended state some applications wait
on "Stream Pipe Error" in response to snd_pcm_avail call to
resume the stream.
In the current implementation snd_pcm_avail() returns zero
when the stream is in suspended state. This causes application
to enter in infinite loop for frames to be available.
"Stream pipe Error" code is getting returned for read/write
call when the stream is in suspended state. Similarly update
snd_pcm_avail to return -ESTRPIPE.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I got this with syzkaller:
==================================================================
BUG: KASAN: null-ptr-deref on address 0000000000000020
Read of size 32 by task syz-executor/22519
CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
014
0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
Call Trace:
[<ffffffff81f9f141>] dump_stack+0x83/0xb2
[<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
[<ffffffff8161ff74>] kasan_report+0x34/0x40
[<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
[<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
[<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
[<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
[<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
[<ffffffff8127c278>] ? do_group_exit+0x108/0x330
[<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
[<ffffffff81674dfe>] __vfs_read+0x10e/0x550
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
[<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
[<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
[<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
[<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
[<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
[<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
[<ffffffff81675355>] vfs_read+0x115/0x330
[<ffffffff81676371>] SyS_read+0xd1/0x1a0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
[<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
[<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
[<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
==================================================================
There are a couple of problems that I can see:
- ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
would get a NULL pointer dereference like the above splat
- the same ioctl() can free tu->queue/to->tqueue which means read()
could potentially see (and dereference) the freed pointer
We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.
Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, automatic variable of 'union ioctl_arg' type is initialized
by designated initialization. Although, the actual effect is interpretation
of early element of int type and initialization of 'int pversion'.
Therefore the first field corresponding to int type is initialized to zero.
This is against my expectation to initialize whole fields.
This commit uses memset() to initialize the variable, instead of designated
initialization.
Fixes: 04a56dd8ed ('ALSA: seq: change ioctl command operation to get data in kernel space')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Former commits change existent functions so that they don't handle data in
kernel space. Copying from/to userspace is done outside of the functions,
thus no need to change address limit of running task.
This commit obsoletes get_fs()/set_fs() and applies corresponding changes.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In previous commit, a new table for functions with data in kernel space
is added to replace current table.
This commit changes existent functions to fit the table. These functions
are added to the new table and removed from the old table.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA sequencer is designed with two types of clients; application and
kernel. Operations for each ioctl command should handle data in both of
user space and kernel space, while current implementation just allows them
to handle data in user space. Data in kernel space is handled with change
of address limit of running tasks.
This commit adds a new table to map ioctl commands to corresponding
functions. The functions get data in kernel space. Helper functions to
operate kernel and application clients seek entries from the table.
Especially, the helper function for application is responsible for coping
from user space to kernel space or vise versa.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This kernel API is used by kernel implementation. Currently, it's used for
kernel clients of ALSA sequencer, while it can be used for application
clients. The difference is just on address spaces of argument. In short,
this kernel API can be available for application client with data in kernel
space.
This commit adds a document about this.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Not really any framework work this time around (though we have seen one
of the Analog Devices drivers move more to the clock API which is good
to see) but rather a lot of new drivers:
- Lots of updates for the Intel drivers, mostly board support and bug
fixing, and to the NAU8825 driver.
- Work on generalizing bits of simple-card to allow more code sharing
with the Renesas rsrc-card (which can't use simple-card due to DPCM).
- Removal of the Odroid X2 driver due to replacement with simple-card.
- Support for several new Mediatek platforms and associated boards.
- New drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom
Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504,
Realtek RT5514 and Wolfson WM8758
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXli6yAAoJECTWi3JdVIfQgmkH/RIfbuCuGJCspFNZ3Gv/ORoX
oRcUILFd/74FRhQ+ax65Vg/Sn1P/p9dSLspRmZt/pjR37vr/b6BlZSLXgCEqVgIr
OjYi6ixcEeGyfIvWUH77nYgnUGT62XVJPfQC/2r8DsYI2bWw6tQGA/rCE2h9cl0N
JoeoGghcNoxS7zZzhgoyTX6B1FoQjJiHML6ApOvpGJWr87dPv1nbJHVBrYOPMr4X
4l/oVzOIVDmhRQtYPAWTXQzDNhVrLPxs8sgd/oV41Jl4gHRW4EPivjUBCWxQKPFy
Tf98Q7058eqcFn/egO5lsvzC0kQdiKEXpSRfol4VAU6LAvGxAYDbaIh8cBy29P4=
=nQWb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.8
Not really any framework work this time around (though we have seen one
of the Analog Devices drivers move more to the clock API which is good
to see) but rather a lot of new drivers:
- Lots of updates for the Intel drivers, mostly board support and bug
fixing, and to the NAU8825 driver.
- Work on generalizing bits of simple-card to allow more code sharing
with the Renesas rsrc-card (which can't use simple-card due to DPCM).
- Removal of the Odroid X2 driver due to replacement with simple-card.
- Support for several new Mediatek platforms and associated boards.
- New drivers for Allwinner A10, Analog Devices ADAU7002, Broadcom
Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960 and MAX98504,
Realtek RT5514 and Wolfson WM8758
The chmap ctls assigned to PCM streams are freed in the PCM disconnect
callback. However, since the disconnect callback isn't called when
the card gets freed before registering, the chmap ctls may still be
left assigned. They are eventually freed together with other ctls,
but it may cause an Oops at pcm_chmap_ctl_private_free(), as the
function refers to the assigned PCM stream, while the PCM objects have
been already freed beforehand.
The fix is to free the chmap ctls also at PCM free callback, not only
at PCM disconnect.
Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ctl_remove() has a notification for the removal event. It's
superfluous when done during the device got disconnected. Although
the notification itself is mostly harmless, it may potentially be
harmful, and should be suppressed. Actually some components PCM may
free ctl elements during the disconnect or free callbacks, thus it's
no theoretical issue.
This patch adds the check of card->shutdown flag for avoiding
unnecessary notifications after (or during) the disconnect.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 'dimen' field in struct snd_ctl_elem_info is used to compose all of
members in the element as multi-dimensional matrix. The field has four
members. Each member represents the width in each dimension level by
element member unit. For example, if the members consist of typical
two dimensional matrix, the dimen[0] represents the number of rows
and dimen[1] represents the number of columns (or vise-versa).
The total members in the matrix should be exactly the same as the number
of members in the element, while current implementation has no validator
of this information. In a view of userspace applications, the information
must be valid so that it cannot cause any bugs such as buffer-over-run.
This commit adds a validator of dimension information for userspace
applications which add new element sets. When they add the element sets
with wrong dimension information, they receive -EINVAL.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The user timer tu->qused counter may go to a negative value when
multiple concurrent reads are performed since both the check and the
decrement of tu->qused are done in two individual locked contexts.
This results in bogus read outs, and the endless loop in the
user-space side.
The fix is to move the decrement of the tu->qused counter into the
same spinlock context as the zero-check of the counter.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sequencer client manager reports timestamps in units of unsigned
32-bit seconds/nanoseconds, but that does not suffer from the y2038
overflow because it stores only the delta since the 'last_update'
time was recorded.
However, the use of the do_gettimeofday() function is problematic
and we have to replace it to avoid the overflow on on 32-bit
architectures.
This uses 'struct timespec64' to record 'last_update', and changes
the code to use monotonic timestamps that do not suffer from leap
seconds and settimeofday updates.
As a side-effect, the code can now use the timespec64_sub() helper
and become more readable and also avoid a multiplication to convert
from microseconds to nanoseconds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the in order struct initialisation style with explicit field
style.
The Coccinelle semantic patch used to make this change is as follows:
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@
struct i1 {
fs
T fld;
...};
@@
identifier decl.i1,i2,decl.fld;
expression e;
position bad.p, bad.fix;
@@
struct i1 i2@p = { ...,
+ .fld = e
- e@fix
,...};
Also, removed some unnecessary comments.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, the avail IOCTL doesn't pass any error status, which
means typically on error it simply shows no data available. This
can lead to situations where user-space is waiting indefinitely
for data that will never come as the DSP has suffered an
unrecoverable error.
Add snd_compr_stop_error which end drivers can call to indicate
the stream has suffered an unrecoverable error and stop it. The
avail and poll IOCTLs are then updated to report if the stream is
in an error state to user-space. Allowing the error to propagate
out. Processing of the actual snd_compr_stop needs to be deferred
to a worker thread as the end driver may detect the errors during
an existing operation callback.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The updates this time around are almost all driver code:
- Further slow progress on the topology code.
- Substantial updates and improvements for the da7219, es8328, fsl-ssi
Intel and rcar drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXOao7AAoJECTWi3JdVIfQ3EQH/1Z4nukvcOeZgVN/4K9b27t2
LYSyPH4+7XiDsi24UAyxZWls625t+1XRtolS0yHYY+IMObkeH/T+StTirDG4C1Mv
0uw/lEs5XmkSPFMad2fDcVXhf+D6EsvuLZ24qLKhoi8TyePv6GRvYapitE4dAI7Z
bBwjT+f9r1qSMJvfCmqit8zDneDFMKd7oqPmBW6NpFri5/ksn1KUnd/zOGu2SlSd
R01Oa2VbRDGj8/Zzu5MORvgLLucxTqtAFYeF3T52M5oc33IBWvbha4fk/BDOswbz
H9S3vHyakmbZgXnnGMTp4qz0bxA76YaHzjtqgGUEMbigHTsB0PP5TtII3i5LkaY=
=Zsr1
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.7
The updates this time around are almost all driver code:
- Further slow progress on the topology code.
- Substantial updates and improvements for the da7219, es8328, fsl-ssi
Intel and rcar drivers.
When snd_pcm_add_chmap_ctls() is called to the PCM stream to which a
chmap has been already assigned, it returns as an error due to the
conflicting snd_ctl_add() result. However, this also clears the
already assigned chmap_kctl field via pcm_chmap_ctl_private_free(),
and becomes inconsistent in the later operation.
This patch adds the check of the conflicting chmap kctl before
actually trying to allocate / assign. The check failure is treated as
a kernel warning, as the double call of snd_pcm_add_chmap_ctls() is
basically a driver bug and having the stack trace would help
developers to figure out the bad code path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A switch statement looks a bit cleaner than an if statement
spread over 3 lines, as such update this to a switch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We can't return a negative error code from the poll callback the return
type is unsigned and is checked against the poll specific flags we need
to return POLLERR if we encounter an error.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
stream can't be NULL here as we have just taken the address of it, so no
need for the check.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a function that returns the appropriate flags for the stream
direction, so we should use it.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We can't return a negative error code from the poll callback the return
type is unsigned and is checked against the poll specific flags we need
to return POLLERR if we encounter an error.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The stack object “r1” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The stack object “tread” has a total size of 32 bytes. Its field
“event” and “val” both contain 4 bytes padding. These 8 bytes
padding bytes are sent to user without being initialized.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dmaengine_pcm currently only supports setups where FIFO reads/writes
correspond to exactly one sample, eg 16-bit sample data is transferred
via 16-bit FIFO accesses, 32-bit data via 32-bit accesses.
This patch adds support for setups with fixed width FIFOs where
multiple samples are packed into a larger word.
For example setups with a 32-bit wide FIFO register that expect
16-bit sample transfers to be done with the left+right sample data
packed into a 32-bit word.
Support for packed transfers is controlled via the
SND_DMAENGINE_PCM_DAI_FLAG_PACK flag in snd_dmaengine_dai_dma_data.flags
If this flag is set dmaengine_pcm doesn't put any restriction on the
supported formats and sets the DMA transfer width to undefined.
This means control over the constraints is now transferred to the DAI
driver and it's responsible to provide proper configuration and
check for possible corner cases that aren't handled by the ALSA core.
Signed-off-by: Matthias Reichl <hias@horus.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch tries to address the still remaining issues in ALSA hrtimer
driver:
- Spurious use-after-free was detected in hrtimer callback
- Incorrect rescheduling due to delayed start
- WARN_ON() is triggered in hrtimer_forward() invoked in hrtimer
callback
The first issue happens only when the new timer is scheduled even
while hrtimer is being closed. It's related with the second and third
items; since ALSA timer core invokes hw.start callback during hrtimer
interrupt, this may result in the explicit call of hrtimer_start().
Also, the similar problem is seen for the stop; ALSA timer core
invokes hw.stop callback even in the hrtimer handler, too. Since we
must not call the synced hrtimer_cancel() in such a context, it's just
a hrtimer_try_to_cancel() call that doesn't properly work.
Another culprit of the second and third items is the call of
hrtimer_forward_now() before snd_timer_interrupt(). The timer->stick
value may change during snd_timer_interrupt() call, but this
possibility is ignored completely.
For covering these subtle and messy issues, the following changes have
been done in this patch:
- A new flag, in_callback, is introduced in the private data to
indicate that the hrtimer handler is being processed.
- Both start and stop callbacks skip when called from (during)
in_callback flag.
- The hrtimer handler returns properly HRTIMER_RESTART and NORESTART
depending on the running state now.
- The hrtimer handler reprograms the expiry properly after
snd_timer_interrupt() call, instead of before.
- The close callback clears running flag and sets in_callback flag
to block any further start/stop calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are no users of rtctimer left. Remove its code as this is the
in-kernel user of the legacy PC RTC driver that will hopefully be removed
at some point.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently kill_fasync() is called outside the stream lock in
snd_pcm_period_elapsed(). This is potentially racy, since the stream
may get released even during the irq handler is running. Although
snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't
guarantee that the irq handler finishes, thus the kill_fasync() call
outside the stream spin lock may be invoked after the substream is
detached, as recently reported by KASAN.
As a quick workaround, move kill_fasync() call inside the stream
lock. The fasync is rarely used interface, so this shouldn't have a
big impact from the performance POV.
Ideally, we should implement some sync mechanism for the proper finish
of stream and irq handler. But this oneliner should suffice for most
cases, so far.
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Treat 32 bit sample width as if it was 24 bits when generating IEC958
channel status bits. On some platforms 24 sample width is problematic
and to get full 24 bit precision a 32 bit format, using only the 24
most significant bits, may have to be used.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IEC958 channel status helper that gets the audio properties from
snd_pcm_hw_params instead of snd_pcm_runtime. This is needed to
produce the channel status bits already in audio stream configuration
phase.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA system timer backend stops the timer via del_timer() without sync
and leaves del_timer_sync() at the close instead. This is because of
the restriction by the design of ALSA timer: namely, the stop callback
may be called from the timer handler, and calling the sync shall lead
to a hangup. However, this also triggers a kernel BUG() when the
timer is rearmed immediately after stopping without sync:
kernel BUG at kernel/time/timer.c:966!
Call Trace:
<IRQ>
[<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0
[<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0
[<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290
[<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120
[<ffffffff81296b72>] call_timer_fn+0x162/0x520
[<ffffffff81296add>] ? call_timer_fn+0xcd/0x520
[<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0
....
It's the place where add_timer() checks the pending timer. It's clear
that this may happen after the immediate restart without sync in our
cases.
So, the workaround here is just to use mod_timer() instead of
add_timer(). This looks like a band-aid fix, but it's a right move,
as snd_timer_interrupt() takes care of the continuous rearm of timer.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'struct snd_timer_gparams' includes some members with 'unsigned long',
therefore its size differs depending on data models of architecture. As
a result, x86/x32 applications fail to execute ioctl(2) with
SNDRV_TIMER_GPARAMS command on x86_64 machine.
This commit fixes this bug by adding a pair of structure and ioctl
command for the compatibility.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In control compatibility layer, when no elements are found by
ELEM_READ/ELEM_WRITE ioctl commands, ENXIO is returned. On the other hand,
in core implementation, ENOENT is returned. This is not good for
ALSA ctl applications.
This commit changes the return value from the compatibility layer so
that the same value is returned.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The main thing in terms of the core this time around has been some
additional framework work for dynamic topologies (though we *still*
don't appear to have a stable ABI for the topology code, it's probably
worth considering if this will ever happen...). Otherwise the work has
almost all been in the drivers:
- HDMI support for Sky Lake, along with other fixes and enhancements
for the Intel drivers.
- Lots of improvements to the Renesas drivers.
- Capture support for Qualcomm drivers.
- Support for TI DaVinci DRA7xxx devices.
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs.
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW5qP+AAoJECTWi3JdVIfQJhAH/RKv268gjE07uJ8jeGAT7uY4
XM19VmUl7ZOlphctfr/I+1hRwo+mgGN4LSfKnXxsPk9Uq/WJUok4D7MjDN33jeX/
heK9WAO8zXkgi9n2lhGI/z9uE76kPA/Qw0aEYcbmA6bDc4GF3AKphnByh6kDShtE
BfblofsFaDywA09XQ2lh3wW0rZtJ51tQUeOi35UADyEPzQetzN+xiY85Bkia5BEt
Yjp37nLJET8Gk0r9snE2MpACUkEyw7CiPXCjkK47npia41LVnTarZAq5+JmfKygg
YV2EnC3AFYthhjZPfmO1usI2vJVwkN40nGrKipH2QX08TanK8r2qiTsmGADNX4E=
=0/1R
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.6
The main thing in terms of the core this time around has been some
additional framework work for dynamic topologies (though we *still*
don't appear to have a stable ABI for the topology code, it's probably
worth considering if this will ever happen...). Otherwise the work has
almost all been in the drivers:
- HDMI support for Sky Lake, along with other fixes and enhancements
for the Intel drivers.
- Lots of improvements to the Renesas drivers.
- Capture support for Qualcomm drivers.
- Support for TI DaVinci DRA7xxx devices.
- New machine drivers for Freescale systems with Cirrus CODECs,
Mediatek systems with RT5650 CODECs.
- New CPU drivers for Allwinner S/PDIF controllers
- New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514.
The commit [d507941beb1e: ALSA: pcm: Correct PCM BUG error message]
made the warning prefix back to "BUG:" due to its previous wrong
prefix. But a kernel message containing "BUG:" seems taken as an Oops
message wrongly by some brain-dead daemons, and it annoys users in the
end. Instead of teaching daemons, change the string again to a more
reasonable one.
Fixes: 507941beb1e ('ALSA: pcm: Correct PCM BUG error message')
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
rawmidi devices expose the card number via IOCTLs, which allows to
find the corresponding device in sysfs.
The sequencer provides no identifing data. Chromium works around this
issue by scanning rawmidi as well as sequencer devices and matching
them by using assumtions, how the kernel register sequencer devices.
This changes adds support for exposing the card number for kernel clients
as well as the PID for user client.
The minor of the API version is changed to distinguish between the zero
initialised reserved field and card number 0.
[minor coding style fixes by tiwai]
Signed-off-by: Martin Koegler <martin.koegler@chello.at>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More inspection of code revealed few more typos so fix them as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stream states were explained in the code comments but
SNDRV_PCM_STATE_PREPARED was missed so add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow writes in SNDRV_PCM_STATE_PREPARED state so that more
than one buffer fragment can be written from user space
before calling SNDRV_COMPRESS_START.
Signed-off-by: Eric Laurent <elaurent@google.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The OSS sequencer client tries to drain the pending events at
releasing. Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future. Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.
Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.
This patch just removes the draining call that may block the release
for too long time unexpectedly.
BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32. This results in NOTTY error when the ioctl is
issued.
Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one. This patch addresses
it to return the proper struct.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.
This patch fixes the incompatible ioctl for X32.
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
X32 ABI uses the 64bit timespec in addition to 64bit alignment of
64bit values. This leads to incompatibilities in some PCM ioctls
involved with snd_pcm_channel_info, snd_pcm_status and
snd_pcm_sync_ptr structs. Fix the PCM compat ABI for these ioctls
like the previous commit for ctl API.
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32. Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array. This ends up with the
unknown ioctl (ENOTTY) error.
The fix is to add the compat entries for the new aligned struct.
Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices. That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.
For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
CONFIG_INPUT.
This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A non-atomic PCM stream may take snd_pcm_link_rwsem rw semaphore twice
in the same code path, e.g. one in snd_pcm_action_nonatomic() and
another in snd_pcm_stream_lock(). Usually this is OK, but when a
write lock is issued between these two read locks, the problem
happens: the write lock is blocked due to the first reade lock, and
the second read lock is also blocked by the write lock. This
eventually deadlocks.
The reason is the way rwsem manages waiters; it's queued like FIFO, so
even if the writer itself doesn't take the lock yet, it blocks all the
waiters (including reads) queued after it.
As a workaround, in this patch, we replace the standard down_write()
with an spinning loop. This is far from optimal, but it's good
enough, as the spinning time is supposed to be relatively short for
normal PCM operations, and the code paths requiring the write lock
aren't called so often.
Reported-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Ramesh Babu <ramesh.babu@intel.com>
Cc: <stable@vger.kernel.org> # v3.18+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [7f0973e973cd: ALSA: seq: Fix lockdep warnings due to
double mutex locks] split the management of two linked lists (source
and destination) into two individual calls for avoiding the AB/BA
deadlock. However, this may leave the possible double deletion of one
of two lists when the counterpart is being deleted concurrently.
It ends up with a list corruption, as revealed by syzkaller fuzzer.
This patch fixes it by checking the list emptiness and skipping the
deletion and the following process.
BugLink: http://lkml.kernel.org/r/CACT4Y+bay9qsrz6dQu31EcGaH9XwfW7o3oBzSQUG9fMszoh=Sg@mail.gmail.com
Fixes: 7f0973e973 ('ALSA: seq: Fix lockdep warnings due to 'double mutex locks)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When multiple concurrent writes happen on the ALSA sequencer device
right after the open, it may try to allocate vmalloc buffer for each
write and leak some of them. It's because the presence check and the
assignment of the buffer is done outside the spinlock for the pool.
The fix is to move the check and the assignment into the spinlock.
(The current implementation is suboptimal, as there can be multiple
unnecessary vmallocs because the allocation is done before the check
in the spinlock. But the pool size is already checked beforehand, so
this isn't a big problem; that is, the only possible path is the
multiple writes before any pool assignment, and practically seen, the
current coverage should be "good enough".)
The issue was triggered by syzkaller fuzzer.
BugLink: http://lkml.kernel.org/r/CACT4Y+bSzazpXNvtAr=WXaL8hptqjHwqEyFA+VN2AWEx=aurkg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_timer_notify1() is called outside the spinlock and it retakes the
lock after the unlock. This is rather racy, and it's safer to move
snd_timer_notify() call inside the main spinlock.
The patch also contains a slight refactoring / cleanup of the code.
Now all start/stop/continue/pause look more symmetric and a bit better
readable.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In order to make the open/close more robust, widen the register_mutex
protection over the whole snd_timer_close() function. Also, the close
procedure is slightly shuffled to be in the safer order, as well as a
few code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_timer_user_read() has a potential race among parallel reads, as
qhead and qused are updated outside the critical section due to
copy_to_user() calls. Move them into the critical section, and also
sanitize the relevant code a bit.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slave timer element also unlinks at snd_timer_stop() but it takes
only slave_active_lock. When a slave is assigned to a master,
however, this may become a race against the master's interrupt
handling, eventually resulting in a list corruption. The actual bug
could be seen with a syzkaller fuzzer test case in BugLink below.
As a fix, we need to take timeri->timer->lock when timer isn't NULL,
i.e. assigned to a master, while the assignment to a master itself is
protected by slave_active_lock.
BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_timer_notify1(), the wrong timer instance was passed for slave
ccallback function. This leads to the access to the wrong data when
an incompatible master is handled (e.g. the master is the sequencer
timer and the slave is a user timer), as spotted by syzkaller fuzzer.
This patch fixes that wrong assignment.
BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper function can convert a given sample rate range to
SNDRV_PCM_RATE_xxx bits.
Signed-off-by: Mengdong Lin <mengdong.lin@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In ALSA timer core, the active timer instance is managed in
active_list linked list. Each element is added / removed dynamically
at timer start, stop and in timer interrupt. The problem is that
snd_timer_interrupt() has a thinko and leaves the element in
active_list when it's the last opened element. This eventually leads
to list corruption or use-after-free error.
This hasn't been revealed because we used to delete the list forcibly
in snd_timer_stop() in the past. However, the recent fix avoids the
double-stop behavior (in commit [f784beb75ce8: ALSA: timer: Fix link
corruption due to double start or stop]), and this leak hits reality.
This patch fixes the link management in snd_timer_interrupt(). Now it
simply unlinks no matter which stream is.
BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The port subscription code uses double mutex locks for source and
destination ports, and this may become racy once when wrongly set up.
It leads to lockdep warning splat, typically triggered by fuzzer like
syzkaller, although the actual deadlock hasn't been seen, so far.
This patch simplifies the handling by reducing to two single locks, so
that no lockdep warning will be trigger any longer.
By splitting to two actions, a still-in-progress element shall be
added in one list while handling another. For ignoring this element,
a new check is added in deliver_to_subscribers().
Along with it, the code to add/remove the subscribers list element was
cleaned up and refactored.
BugLink: http://lkml.kernel.org/r/CACT4Y+aKQXV7xkBW9hpQbzaDO7LrUvohxWh-UwMxXjDy-yBD=A@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The rawmidi read and write functions manage runtime stream status
such as runtime->appl_ptr and runtime->avail. These point where to
copy the new data and how many bytes have been copied (or to be
read). The problem is that rawmidi read/write call copy_from_user()
or copy_to_user(), and the runtime spinlock is temporarily unlocked
and relocked while copying user-space. Since the current code
advances and updates the runtime status after the spin unlock/relock,
the copy and the update may be asynchronous, and eventually
runtime->avail might go to a negative value when many concurrent
accesses are done. This may lead to memory corruption in the end.
For fixing this race, in this patch, the status update code is
performed in the same lock before the temporary unlock. Also, the
spinlock is now taken more widely in snd_rawmidi_kernel_read1() for
protecting more properly during the whole operation.
BugLink: http://lkml.kernel.org/r/CACT4Y+b-dCmNf1GpgPKfDO0ih+uZCL2JV4__j-r1kdhPLSgQCQ@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A kernel WARNING in snd_rawmidi_transmit_ack() is triggered by
syzkaller fuzzer:
WARNING: CPU: 1 PID: 20739 at sound/core/rawmidi.c:1136
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff82999e2d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
[<ffffffff81352089>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
[<ffffffff813522b9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
[<ffffffff84f80bd5>] snd_rawmidi_transmit_ack+0x275/0x400 sound/core/rawmidi.c:1136
[<ffffffff84fdb3c1>] snd_virmidi_output_trigger+0x4b1/0x5a0 sound/core/seq/seq_virmidi.c:163
[< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150
[<ffffffff84f87ed9>] snd_rawmidi_kernel_write1+0x549/0x780 sound/core/rawmidi.c:1223
[<ffffffff84f89fd3>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1273
[<ffffffff817b0323>] __vfs_write+0x113/0x480 fs/read_write.c:528
[<ffffffff817b1db7>] vfs_write+0x167/0x4a0 fs/read_write.c:577
[< inline >] SYSC_write fs/read_write.c:624
[<ffffffff817b50a1>] SyS_write+0x111/0x220 fs/read_write.c:616
[<ffffffff86336c36>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185
Also a similar warning is found but in another path:
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff82be2c0d>] dump_stack+0x6f/0xa2 lib/dump_stack.c:50
[<ffffffff81355139>] warn_slowpath_common+0xd9/0x140 kernel/panic.c:482
[<ffffffff81355369>] warn_slowpath_null+0x29/0x30 kernel/panic.c:515
[<ffffffff8527e69a>] rawmidi_transmit_ack+0x24a/0x3b0 sound/core/rawmidi.c:1133
[<ffffffff8527e851>] snd_rawmidi_transmit_ack+0x51/0x80 sound/core/rawmidi.c:1163
[<ffffffff852d9046>] snd_virmidi_output_trigger+0x2b6/0x570 sound/core/seq/seq_virmidi.c:185
[< inline >] snd_rawmidi_output_trigger sound/core/rawmidi.c:150
[<ffffffff85285a0b>] snd_rawmidi_kernel_write1+0x4bb/0x760 sound/core/rawmidi.c:1252
[<ffffffff85287b73>] snd_rawmidi_write+0x543/0xb30 sound/core/rawmidi.c:1302
[<ffffffff817ba5f3>] __vfs_write+0x113/0x480 fs/read_write.c:528
[<ffffffff817bc087>] vfs_write+0x167/0x4a0 fs/read_write.c:577
[< inline >] SYSC_write fs/read_write.c:624
[<ffffffff817bf371>] SyS_write+0x111/0x220 fs/read_write.c:616
[<ffffffff86660276>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185
In the former case, the reason is that virmidi has an open code
calling snd_rawmidi_transmit_ack() with the value calculated outside
the spinlock. We may use snd_rawmidi_transmit() in a loop just for
consuming the input data, but even there, there is a race between
snd_rawmidi_transmit_peek() and snd_rawmidi_tranmit_ack().
Similarly in the latter case, it calls snd_rawmidi_transmit_peek() and
snd_rawmidi_tranmit_ack() separately without protection, so they are
racy as well.
The patch tries to address these issues by the following ways:
- Introduce the unlocked versions of snd_rawmidi_transmit_peek() and
snd_rawmidi_transmit_ack() to be called inside the explicit lock.
- Rewrite snd_rawmidi_transmit() to be race-free (the former case).
- Make the split calls (the latter case) protected in the rawmidi spin
lock.
BugLink: http://lkml.kernel.org/r/CACT4Y+YPq1+cYLkadwjWa5XjzF1_Vki1eHnVn-Lm0hzhSpu5PA@mail.gmail.com
BugLink: http://lkml.kernel.org/r/CACT4Y+acG4iyphdOZx47Nyq_VHGbpJQK-6xNpiqUjaZYqsXOGw@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA timer core framework has no sync point at stopping because it's
called inside the spinlock. Thus we need a sync point at close for
avoiding the stray timer task. This is simply done by implementing
the close callback just calling del_timer_sync(). (It's harmless to
call it unconditionally, as the core timer itself cares of the already
deleted timer instance.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although ALSA timer code got hardening for races, it still causes
use-after-free error. This is however rather a corrupted linked list,
not actually the concurrent accesses. Namely, when timer start is
triggered twice, list_add_tail() is called twice, too. This ends
up with the link corruption and triggers KASAN error.
The simplest fix would be replacing list_add_tail() with
list_move_tail(), but fundamentally it's the problem that we don't
check the double start/stop correctly. So, the right fix here is to
add the proper checks to snd_timer_start() and snd_timer_stop() (and
their variants).
BugLink: http://lkml.kernel.org/r/CACT4Y+ZyPRoMQjmawbvmCEDrkBD2BQuH7R09=eOkf5ESK8kJAw@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA sequencer may open/close and control ALSA timer instance
dynamically either via sequencer events or direct ioctls. These are
done mostly asynchronously, and it may call still some timer action
like snd_timer_start() while another is calling snd_timer_close().
Since the instance gets removed by snd_timer_close(), it may lead to
a use-after-free.
This patch tries to address such a race by protecting each
snd_timer_*() call via the existing spinlock and also by avoiding the
access to timer during close call.
BugLink: http://lkml.kernel.org/r/CACT4Y+Z6RzW5MBr-HUdV-8zwg71WQfKTdPpYGvOeS7v4cyurNQ@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are potential deadlocks in PCM OSS emulation code while
accessing read/write and mmap concurrently. This comes from the
infamous mmap_sem usage in copy_from/to_user(). Namely,
snd_pcm_oss_write() ->
&runtime->oss.params_lock ->
copy_to_user() ->
&mm->mmap_sem
mmap() ->
&mm->mmap_sem ->
snd_pcm_oss_mmap() ->
&runtime->oss.params_lock
Since we can't avoid taking params_lock from mmap code path, use
trylock variant and aborts with -EAGAIN as a workaround of this AB/BA
deadlock.
BugLink: http://lkml.kernel.org/r/CACT4Y+bVrBKDG0G2_AcUgUQa+X91VKTeS4v+wN7BSHwHtqn3kQ@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NULL user-space buffer can be passed even in a normal path, thus it's
not good to spew a kernel warning with stack trace at each time.
Just drop snd_BUG_ON() macro usage there.
BugLink: http://lkml.kernel.org/r/CACT4Y+YfVJ3L+q0i-4vyQVyyPD7V=OMX0PWPi29x9Bo3QaBLdw@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The virmidi driver has an open race at closing its assigned rawmidi
device, and this may lead to use-after-free in
snd_seq_deliver_single_event().
Plug the hole by properly protecting the linked list deletion and
calling in the right order in snd_virmidi_input_close().
BugLink: http://lkml.kernel.org/r/CACT4Y+Zd66+w12fNN85-425cVQT=K23kWbhnCEcMB8s3us-Frw@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some architectures like PowerPC can handle the maximum struct size in
an ioctl only up to 13 bits, and struct snd_compr_codec_caps used by
SNDRV_COMPRESS_GET_CODEC_CAPS ioctl overflows this limit. This
problem was revealed recently by a powerpc change, as it's now treated
as a fatal build error.
This patch is a stop-gap for that: for architectures with less than 14
bit ioctl struct size, get rid of the handling of the relevant ioctl.
We should provide an alternative equivalent ioctl code later, but for
now just paper over it. Luckily, the compress API hasn't been used on
such architectures, so the impact must be effectively zero.
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA OSS sequencer spews a kernel error message ("ALSA: seq_oss: too
many applications") when user-space tries to open more than the
limit. This means that it can easily fill the log buffer.
Since it's merely a normal error, it's safe to suppress it via
pr_debug() instead.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA sequencer OSS emulation code has a sanity check for currently
opened devices, but there is a thinko there, eventually it spews
warnings and skips the operation wrongly like:
WARNING: CPU: 1 PID: 7573 at sound/core/seq/oss/seq_oss_synth.c:311
Fix this off-by-one error.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are lots of small fixes that have been collected since the
previous pull. This time, not only trivial ones but fixes for some
serious bugs are included:
- Fix for CPU lockups by snd-hrtimer accesses
- Fix for unsafe disconnection handling in ALSA timer code
- Fix for Oops due to race at HD-audio module removal
- Fixes for possible memory corruption via 32bit PCM and sequencer
compat ioctls
- Fix for regression in HD-audio generic model handling
- Suppress kernel warnings for invalid TLV ioctls that may flood up
- Fix the missing SSC clock handling for at73c213
- A pin fixup for ASUS N550JX
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6OeM
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are lots of small fixes that have been collected since the
previous pull. This time, not only trivial ones but fixes for some
serious bugs are included:
- Fix for CPU lockups by snd-hrtimer accesses
- Fix for unsafe disconnection handling in ALSA timer code
- Fix for Oops due to race at HD-audio module removal
- Fixes for possible memory corruption via 32bit PCM and sequencer
compat ioctls
- Fix for regression in HD-audio generic model handling
- Suppress kernel warnings for invalid TLV ioctls that may flood up
- Fix the missing SSC clock handling for at73c213
- A pin fixup for ASUS N550JX"
* tag 'sound-fix-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Introduce disconnect op to snd_timer_instance
ALSA: timer: Handle disconnection more safely
ALSA: hda - Flush the pending probe work at remove
ALSA: hda - Fix missing module loading with model=generic option
ALSA: hda - Degrade i915 binding failure message
ALSA: at73c213: manage SSC clock
ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0
ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode
ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode
ALSA: hrtimer: Fix stall by hrtimer_cancel()
ALSA: hda - Fix bass pin fixup for ASUS N550JX
Instead of the previous ugly hack, introduce a new op, disconnect, to
snd_timer_instance object for handling the wake up of pending tasks
more cleanly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently ALSA timer device doesn't take the disconnection into
account very well; it merely unlinks the timer device at disconnection
callback but does nothing else. Because of this, when an application
accessing the timer device is disconnected, it may release the
resource before actually closed. In most cases, it results in a
warning message indicating a leftover timer instance like:
ALSA: timer xxxx is busy?
But basically this is an open race.
This patch tries to address it. The strategy is like other ALSA
devices: namely,
- Manage card's refcount at each open/close
- Wake up the pending tasks at disconnection
- Check the shutdown flag appropriately at each possible call
Note that this patch has one ugly hack to handle the wakeup of pending
tasks. It'd be cleaner to introduce a new disconnect op to
snd_timer_instance ops. But since it would lead to internal ABI
breakage and it eventually increase my own work when backporting to
stable kernels, I took a different path to implement locally in
timer.c. A cleanup patch will follow at next for 4.5 kernel.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a TLV ioctl with numid zero is handled, the driver may spew a
kernel warning with a stack trace at each call. The check was
intended obviously only for a kernel driver, but not for a user
interaction. Let's fix it.
This was spotted by syzkaller fuzzer.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts one hunk of
commit ef44a1ec6e ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.
In this case, we are copying from a struct snd_seq_port_info32 to a
struct snd_seq_port_info, but the latter is 4 bytes longer than the
32-bit version, so we need to separate kmalloc and copy calls.
Fixes: ef44a1ec6e ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts one hunk of
commit ef44a1ec6e ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.
In this case, we are copying from a struct snd_pcm_hw_params32 to
a struct snd_pcm_hw_params, but the latter is 4 bytes longer than
the 32-bit version, so we need to separate kmalloc and copy calls.
This actually leads to an out-of-bounds memory access later on
in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan).
Fixes: ef44a1ec6e ('ALSA: sound/core: use memdup_user()')
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hrtimer_cancel() waits for the completion from the callback, thus it
must not be called inside the callback itself. This was already a
problem in the past with ALSA hrtimer driver, and the early commit
[fcfdebe70759: ALSA: hrtimer - Fix lock-up] tried to address it.
However, the previous fix is still insufficient: it may still cause a
lockup when the ALSA timer instance reprograms itself in its callback.
Then it invokes the start function even in snd_timer_interrupt() that
is called in hrtimer callback itself, results in a CPU stall. This is
no hypothetical problem but actually triggered by syzkaller fuzzer.
This patch tries to fix the issue again. Now we call
hrtimer_try_to_cancel() at both start and stop functions so that it
won't fall into a deadlock, yet giving some chance to cancel the queue
if the functions have been called outside the callback. The proper
hrtimer_cancel() is called in anyway at closing, so this should be
enough.
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree in
anyway sooner or later.]
Core
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc
- A few code cleanups of fm801 driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gvgb
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[ NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree
in anyway sooner or later. ]
Core:
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC:
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio:
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire:
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio:
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc:
- A few code cleanups of fm801 driver"
* tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits)
ALSA: timer: Code cleanup
ALSA: timer: Harden slave timer list handling
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix race among timer ioctls
ALSA: hda - add codec support for Kabylake display audio codec
ALSA: timer: Fix double unlink of active_list
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: hda_intel: add card number to irq description
ALSA: seq: Fix race at timer setup and close
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
ASoC: AMD: Add missing include file
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
ASoC: Make aux_dev more like a generic component
ASoC: bcm2835: cleanup includes by ordering them alphabetically
ASoC: AMD: Manage ACP 2.x SRAM banks power
...
This is a minor code cleanup without any functional changes:
- Kill keep_flag argument from _snd_timer_stop(), as all callers pass
only it false.
- Remove redundant NULL check in _snd_timer_stop().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slave timer instance might be still accessible in a racy way while
operating the master instance as it lacks of locking. Since the
master operation is mostly protected with timer->lock, we should cope
with it while changing the slave instance, too. Also, some linked
lists (active_list and ack_list) of slave instances aren't unlinked
immediately at stopping or closing, and this may lead to unexpected
accesses.
This patch tries to address these issues. It adds spin lock of
timer->lock (either from master or slave, which is equivalent) in a
few places. For avoiding a deadlock, we ensure that the global
slave_active_lock is always locked at first before each timer lock.
Also, ack and active_list of slave instances are properly unlinked at
snd_timer_stop() and snd_timer_close().
Last but not least, remove the superfluous call of _snd_timer_stop()
at removing slave links. This is a noop, and calling it may confuse
readers wrt locking. Further cleanup will follow in a later patch.
Actually we've got reports of use-after-free by syzkaller fuzzer, and
this hopefully fixes these issues.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA timer ioctls have an open race and this may lead to a
use-after-free of timer instance object. A simplistic fix is to make
each ioctl exclusive. We have already tread_sem for controlling the
tread, and extend this as a global mutex to be applied to each ioctl.
The downside is, of course, the worse concurrency. But these ioctls
aren't to be parallel accessible, in anyway, so it should be fine to
serialize there.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA timer instance object has a couple of linked lists and they are
unlinked unconditionally at snd_timer_stop(). Meanwhile
snd_timer_interrupt() unlinks it, but it calls list_del() which leaves
the element list itself unchanged. This ends up with unlinking twice,
and it was caught by syzkaller fuzzer.
The fix is to use list_del_init() variant properly there, too.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:
PCI-MSI 442368-edge snd_hda_intel:card1
PCI-MSI 49152-edge snd_hda_intel:card0
NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation. This can be used
generically for other drivers as well. The changes for others will
follow later -- tiwai
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA sequencer code has an open race between the timer setup ioctl and
the close of the client. This was triggered by syzkaller fuzzer, and
a use-after-free was caught there as a result.
This patch papers over it by adding a proper queue->timer_mutex lock
around the timer-related calls in the relevant code path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear()
unconditionally even if there is no FIFO assigned, and this leads to
an Oops due to NULL dereference. The fix is just to add a proper NULL
check.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Compress offload does not support ioctl calls from a 32bit userspace
in a 64 bit kernel. This patch adds support for ioctls from a 32bit
userspace in a 64bit kernel
Signed-off-by: Ravindra Lokhande <rlokhande@nvidia.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA PCM, mixer and sequencer OSS emulations provide the 32bit
compatible ioctl, but they just call the 64bit native ioctl as is.
Although this works in most cases, passing the argument value as-is
isn't guaranteed to work on all architectures. We need to convert it
via compat_ptr() instead.
This patch addresses the missing conversions. Since all relevant
ioctls in these functions take the argument as a pointer, we do the
pointer conversion in each compat_ioctl and pass it as a 64bit value
to the native ioctl.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make snd_compress_new take an id string (like snd_pcm_new).
This string can be included in the procfs info.
This patch also updates soc_new_compress() to create an ID
based on the stream and dai name, as done for PCM streams.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch implements a procfs info file for compr nodes when
SND_VERBOSE_PROCFS is enabled. This is equivalent to what the PCM
core already does for pcm nodes.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The action_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_rawmidi_global_ops structures are never modified, so declare them
as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new dmaengine_synchronize() function to make sure that all complete
callbacks have finished running before the runtime data, which is accessed
in the completed callback, is freed.
This fixes a long standing use-after-free race condition that has been
observed on some systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The ALSA core does not modify the constraints provided by a driver. Most
constraint helper functions already take a const pointer to the constraint
description, the exception at the moment being the ratden and ratnum
constraints. Make those const as well, this allows a driver to declare them
as const.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While there is nothing wrong with the transfer_ack_begin and
transfer_ack_end callbacks per-se, the last documented user was part of the
alsa-driver 0.5.12a package, which was released 14 years ago and even
predates the upstream integration of the ALSA core and has subsequently
been superseded by newer alsa-driver releases.
This seems to indicate that there is no need for having these callbacks and
they are just cruft that can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCM timer is not always used. For embedded device, we need an interface
to disable it when it is not needed, to shrink the kernel size and
memory footprint, here add CONFIG_SND_PCM_TIMER for it.
When both CONFIG_SND_PCM_TIMER and CONFIG_SND_TIMER is unselected,
about 25KB saving bonus we can get.
Please be noted that when disabled, those stubs who using pcm timer
(e.g. dmix, dsnoop & co) may work incorrectlly.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We cap the upper bound of "idx" but not the negative side. Let's make
it unsigned to fix this.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_oss_readq_put_event() seems to be missing a memory barrier which
might cause the waker to not notice the waiter and miss sending a
wake_up as in the following figure.
snd_seq_oss_readq_put_event snd_seq_oss_readq_wait
------------------------------------------------------------------------
/* wait_event_interruptible_timeout */
/* __wait_event_interruptible_timeout */
/* ___wait_event */
for (;;) { prepare_to_wait_event(&wq, &__wait,
state);
spin_lock_irqsave(&q->lock, flags);
if (waitqueue_active(&q->midi_sleep))
/* The CPU might reorder the test for
the waitqueue up here, before
prior writes complete */
if ((q->qlen>0 || q->head==q->tail)
...
__ret = schedule_timeout(__ret)
if (q->qlen >= q->maxlen - 1) {
memcpy(&q->q[q->tail], ev, sizeof(*ev));
q->tail = (q->tail + 1) % q->maxlen;
q->qlen++;
------------------------------------------------------------------------
There are two other place in sound/core/seq/oss/ which have similar
code. The attached patch removes the call to waitqueue_active() leaving
just wake_up() behind. This fixes the problem because the call to
spin_lock_irqsave() in wake_up() will be an ACQUIRE operation.
I found this issue when I was looking through the linux source code
for places calling waitqueue_active() before wake_up*(), but without
preceding memory barriers, after sending a patch to fix a similar
issue in drivers/tty/n_tty.c (Details about the original issue can be
found here: https://lkml.org/lkml/2015/9/28/849).
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai