One warning should be enough to get one motivated to fix this. It is
possible that this happens more than once and that starts flooding the
output. Later the prints will be suppressed so we only get half of it.
Depending on the console system used it might not be helpful.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1464356838-1755-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use __jhash_mix() to mix the class_idx into the class_key. This
function provides better mixing than the previously used, home grown
mix function.
Leave hashing to the professionals :-)
Suggested-by: George Spelvin <linux@sciencehorizons.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The mutex owner can get read and written to locklessly.
Use WRITE_ONCE when setting and clearing the owner field
in order to avoid optimizations such as store tearing. This
avoids situations where the owner field gets written to with
multiple stores and another thread could concurrently read
and use a partially written owner value.
Signed-off-by: Jason Low <jason.low2@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Waiman Long <Waiman.Long@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Terry Rudd <terry.rudd@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1463782776.2479.9.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When acquiring the rwsem write lock in the slowpath, we first try
to set count to RWSEM_WAITING_BIAS. When that is successful,
we then atomically add the RWSEM_WAITING_BIAS in cases where
there are other tasks on the wait list. This causes write lock
operations to often issue multiple atomic operations.
We can instead make the list_is_singular() check first, and then
set the count accordingly, so that we issue at most 1 atomic
operation when acquiring the write lock and reduce unnecessary
cacheline contention.
Signed-off-by: Jason Low <jason.low2@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long<Waiman.Long@hpe.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Terry Rudd <terry.rudd@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1463445486-16078-2-git-send-email-jason.low2@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Readers that are awoken will expect a nil ->task indicating
that a wakeup has occurred. Because of the way readers are
implemented, there's a small chance that the waiter will never
block in the slowpath (rwsem_down_read_failed), and therefore
requires some form of reference counting to avoid the following
scenario:
rwsem_down_read_failed() rwsem_wake()
get_task_struct();
spin_lock_irq(&wait_lock);
list_add_tail(&waiter.list)
spin_unlock_irq(&wait_lock);
raw_spin_lock_irqsave(&wait_lock)
__rwsem_do_wake()
while (1) {
set_task_state(TASK_UNINTERRUPTIBLE);
waiter->task = NULL
if (!waiter.task) // true
break;
schedule() // never reached
__set_task_state(TASK_RUNNING);
do_exit();
wake_up_process(tsk); // boom
... and therefore race with do_exit() when the caller returns.
There is also a mismatch between the smp_mb() and its documentation,
in that the serialization is done between reading the task and the
nil store. Furthermore, in addition to having the overlapping of
loads and stores to waiter->task guaranteed to be ordered within
that CPU, both wake_up_process() originally and now wake_q_add()
already imply barriers upon successful calls, which serves the
comment.
Now, as an alternative to perhaps inverting the checks in the blocker
side (which has its own penalty in that schedule is unavoidable),
with lockless wakeups this situation is naturally addressed and we
can just use the refcount held by wake_q_add(), instead doing so
explicitly. Of course, we must guarantee that the nil store is done
as the _last_ operation in that the task must already be marked for
deletion to not fall into the race above. Spurious wakeups are also
handled transparently in that the task's reference is only removed
when wake_up_q() is actually called _after_ the nil store.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hpe.com
Cc: dave@stgolabs.net
Cc: jason.low2@hp.com
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/1463165787-25937-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As wake_qs gain users, we can teach rwsems about them such that
waiters can be awoken without the wait_lock. This is for both
readers and writer, the former being the most ideal candidate
as we can batch the wakeups shortening the critical region that
much more -- ie writer task blocking a bunch of tasks waiting to
service page-faults (mmap_sem readers).
In general applying wake_qs to rwsem (xadd) is not difficult as
the wait_lock is intended to be released soon _anyways_, with
the exception of when a writer slowpath will proactively wakeup
any queued readers if it sees that the lock is owned by a reader,
in which we simply do the wakeups with the lock held (see comment
in __rwsem_down_write_failed_common()).
Similar to other locking primitives, delaying the waiter being
awoken does allow, at least in theory, the lock to be stolen in
the case of writers, however no harm was seen in this (in fact
lock stealing tends to be a _good_ thing in most workloads), and
this is a tiny window anyways.
Some page-fault (pft) and mmap_sem intensive benchmarks show some
pretty constant reduction in systime (by up to ~8 and ~10%) on a
2-socket, 12 core AMD box. In addition, on an 8-core Westmere doing
page allocations (page_test)
aim9:
4.6-rc6 4.6-rc6
rwsemv2
Min page_test 378167.89 ( 0.00%) 382613.33 ( 1.18%)
Min exec_test 499.00 ( 0.00%) 502.67 ( 0.74%)
Min fork_test 3395.47 ( 0.00%) 3537.64 ( 4.19%)
Hmean page_test 395433.06 ( 0.00%) 414693.68 ( 4.87%)
Hmean exec_test 499.67 ( 0.00%) 505.30 ( 1.13%)
Hmean fork_test 3504.22 ( 0.00%) 3594.95 ( 2.59%)
Stddev page_test 17426.57 ( 0.00%) 26649.92 (-52.93%)
Stddev exec_test 0.47 ( 0.00%) 1.41 (-199.05%)
Stddev fork_test 63.74 ( 0.00%) 32.59 ( 48.86%)
Max page_test 429873.33 ( 0.00%) 456960.00 ( 6.30%)
Max exec_test 500.33 ( 0.00%) 507.66 ( 1.47%)
Max fork_test 3653.33 ( 0.00%) 3650.90 ( -0.07%)
4.6-rc6 4.6-rc6
rwsemv2
User 1.12 0.04
System 0.23 0.04
Elapsed 727.27 721.98
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hpe.com
Cc: dave@stgolabs.net
Cc: jason.low2@hp.com
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/1463165787-25937-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recursive locking for ww_mutexes was originally conceived as an
exception. However, it is heavily used by the DRM atomic modesetting
code. Currently, the recursive deadlock is checked after we have queued
up for a busy-spin and as we never release the lock, we spin until
kicked, whereupon the deadlock is discovered and reported.
A simple solution for the now common problem is to move the recursive
deadlock discovery to the first action when taking the ww_mutex.
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1464293297-19777-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXQ40fAAoJEPL5WVaVDYGjnwMH+wXHASgPfzZgtRInsTG8W/2L
jsmAcMlyMAYIATWMppNtPIq0td49z1dYO0YkKhtPVMwfzu230IFWhGWp93WqP9ve
XYHMmaBorFlMAzWgMKn1K0ExWZlV+ammmcTKgU0kU4qyZp0G/NnMtlXIkSNv2amI
9Mn6R+v97c20gn8e9HWP/IVWkgPr+WBtEXaSGjC7dL6yI8hL+rJMqN82D76oU5ea
vtwzrna/ISijy+etYmQzqHNYNaBKf40+B5HxQZw/Ta3FSHofBwXAyLaeEAr260Mf
V3Eg2NDcKQxiZ3adBzIUvrRnrJV381OmHoguo8Frs8YHTTRiZ0T/s7FGr2Q0NYE=
=7yIM
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Fix a number of bugs, most notably a potential stale data exposure
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: pre-zero allocated blocks for DAX IO
ext4: refactor direct IO code
ext4: fix race in transient ENOSPC detection
ext4: handle transient ENOSPC properly for DAX
dax: call get_blocks() with create == 1 for write faults to unwritten extents
ext4: remove unmeetable inconsisteny check from ext4_find_extent()
jbd2: remove excess descriptions for handle_s
ext4: remove unnecessary bio get/put
ext4: silence UBSAN in ext4_mb_init()
ext4: address UBSAN warning in mb_find_order_for_block()
ext4: fix oops on corrupted filesystem
ext4: fix check of dqget() return value in ext4_ioctl_setproject()
ext4: clean up error handling when orphan list is corrupted
ext4: fix hang when processing corrupted orphaned inode list
ext4: remove trailing \n from ext4_warning/ext4_error calls
ext4: fix races between changing inode journal mode and ext4_writepages
ext4: handle unwritten or delalloc buffers before enabling data journaling
ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
ext4: do not ask jbd2 to write data for delalloc buffers
jbd2: add support for avoiding data writes during transaction commits
...
Pull scheduler updates from Ingo Molnar:
- massive CPU hotplug rework (Thomas Gleixner)
- improve migration fairness (Peter Zijlstra)
- CPU load calculation updates/cleanups (Yuyang Du)
- cpufreq updates (Steve Muckle)
- nohz optimizations (Frederic Weisbecker)
- switch_mm() micro-optimization on x86 (Andy Lutomirski)
- ... lots of other enhancements, fixes and cleanups.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
ARM: Hide finish_arch_post_lock_switch() from modules
sched/core: Provide a tsk_nr_cpus_allowed() helper
sched/core: Use tsk_cpus_allowed() instead of accessing ->cpus_allowed
sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
sched/fair: Correct unit of load_above_capacity
sched/fair: Clean up scale confusion
sched/nohz: Fix affine unpinned timers mess
sched/fair: Fix fairness issue on migration
sched/core: Kill sched_class::task_waking to clean up the migration logic
sched/fair: Prepare to fix fairness problems on migration
sched/fair: Move record_wakee()
sched/core: Fix comment typo in wake_q_add()
sched/core: Remove unused variable
sched: Make hrtick_notifier an explicit call
sched/fair: Make ilb_notifier an explicit call
sched/hotplug: Make activate() the last hotplug step
sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
sched/migration: Move CPU_ONLINE into scheduler state
sched/migration: Move calc_load_migrate() into CPU_DYING
sched/migration: Move prepare transition to SCHED_STARTING state
...
Pull support for killable rwsems from Ingo Molnar:
"This, by Michal Hocko, implements down_write_killable().
The main usecase will be to update mm_sem usage sites to use this new
API, to allow the mm-reaper introduced in commit aac4536355 ("mm,
oom: introduce oom reaper") to tear down oom victim address spaces
asynchronously with minimum latencies and without deadlock worries"
[ The vfs will want it too as the inode lock is changed from a mutex to
a rwsem due to the parallel lookup and readdir updates ]
* 'locking-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Fix comment on register clobbering
locking/rwsem: Fix down_write_killable()
locking/rwsem, x86: Add frame annotation for call_rwsem_down_write_failed_killable()
locking/rwsem: Provide down_write_killable()
locking/rwsem, x86: Provide __down_write_killable()
locking/rwsem, s390: Provide __down_write_killable()
locking/rwsem, ia64: Provide __down_write_killable()
locking/rwsem, alpha: Provide __down_write_killable()
locking/rwsem: Introduce basis for down_write_killable()
locking/rwsem, sparc: Drop superfluous arch specific implementation
locking/rwsem, sh: Drop superfluous arch specific implementation
locking/rwsem, xtensa: Drop superfluous arch specific implementation
locking/rwsem: Drop explicit memory barriers
locking/rwsem: Get rid of __down_write_nested()
The new signal_pending exit path in __rwsem_down_write_failed_common()
was fingered as breaking his kernel by Tetsuo Handa.
Upon inspection it was found that there are two things wrong with it;
- it forgets to remove WAITING_BIAS if it leaves the list empty, or
- it forgets to wake further waiters that were blocked on the now
removed waiter.
Especially the first issue causes new lock attempts to block and stall
indefinitely, as the code assumes that pending waiters mean there is
an owner that will wake when it releases the lock.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/20160512115745.GP3192@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Specifically around the debugfs file creation calls,
I have no idea if they could ever possibly fail, but
this is core code (debug aside) so lets at least
check the return value and inform anything fishy.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <Waiman.Long@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160420041725.GC3472@linux-uzut.site
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... remove the redundant second iteration, this is most
likely a copy/past buglet.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: waiman.long@hpe.com
Link: http://lkml.kernel.org/r/1460961103-24953-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The problem with the existing lock pinning is that each pin is of
value 1; this mean you can simply unpin if you know its pinned,
without having any extra information.
This scheme generates a random (16 bit) cookie for each pin and
requires this same cookie to unpin. This means you have to keep the
cookie in context.
No objsize difference for !LOCKDEP kernels.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In ext4, there is a race condition between changing inode journal mode
and ext4_writepages(). While ext4_writepages() is executed on a
non-journalled mode inode, the inode's journal mode could be enabled
by ioctl() and then, some pages dirtied after switching the journal
mode will be still exposed to ext4_writepages() in non-journaled mode.
To resolve this problem, we use fs-wide per-cpu rw semaphore by Jan
Kara's suggestion because we don't want to waste ext4_inode_info's
space for this extra rare case.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
lock_chain::base is used to store an index into the chain_hlocks[]
array, however that array contains more elements than can be indexed
using the u16.
Change the lock_chain structure to use a bitfield to encode the data
it needs and add BUILD_BUG_ON() assertions to check the fields are
wide enough.
Also, for DEBUG_LOCKDEP, assert that we don't run out of elements of
that array; as that would wreck the collision detectoring.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160330093659.GS3408@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_irq_context() returns the encoded irq_context of the task, the
return value is encoded in the same as ->irq_context of held_lock.
Always return 0 if !(CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING)
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sasha.levin@oracle.com
Link: http://lkml.kernel.org/r/1455602265-16490-2-git-send-email-boqun.feng@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all the architectures implement the necessary glue code
we can introduce down_write_killable(). The only difference wrt. regular
down_write() is that the slow path waits in TASK_KILLABLE state and the
interruption by the fatal signal is reported as -EINTR to the caller.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-12-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While playing with the qstat statistics (in <debugfs>/qlockstat/) I ran into
the following splat on a VM when opening pv_hash_hops:
divide error: 0000 [#1] SMP
...
RIP: 0010:[<ffffffff810b61fe>] [<ffffffff810b61fe>] qstat_read+0x12e/0x1e0
...
Call Trace:
[<ffffffff811cad7c>] ? mem_cgroup_commit_charge+0x6c/0xd0
[<ffffffff8119750c>] ? page_add_new_anon_rmap+0x8c/0xd0
[<ffffffff8118d3b9>] ? handle_mm_fault+0x1439/0x1b40
[<ffffffff811937a9>] ? do_mmap+0x449/0x550
[<ffffffff811d3de3>] ? __vfs_read+0x23/0xd0
[<ffffffff811d4ab2>] ? rw_verify_area+0x52/0xd0
[<ffffffff811d4bb1>] ? vfs_read+0x81/0x120
[<ffffffff811d5f12>] ? SyS_read+0x42/0xa0
[<ffffffff815720f6>] ? entry_SYSCALL_64_fastpath+0x1e/0xa8
Fix this by verifying that qstat_pv_kick_unlock is in fact non-zero,
similarly to what the qstat_pv_latency_wake case does, as if nothing
else, this can come from resetting the statistics, thus having 0 kicks
should be quite valid in this context.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Waiman Long <Waiman.Long@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: waiman.long@hpe.com
Link: http://lkml.kernel.org/r/1460961103-24953-1-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce a generic implementation necessary for down_write_killable().
This is a trivial extension of the already existing down_write() call
which can be interrupted by SIGKILL. This patch doesn't provide
down_write_killable() yet because arches have to provide the necessary
pieces before.
rwsem_down_write_failed() which is a generic slow path for the
write lock is extended to take a task state and renamed to
__rwsem_down_write_failed_common(). The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).
rwsem_down_write_failed_killable() is exported as a new way to wait for
the lock and be killable.
For rwsem-spinlock implementation the current __down_write() it updated
in a similar way as __rwsem_down_write_failed_common() except it doesn't
need new exports just visible __down_write_killable().
Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable() implementation and
use rwsem_down_write_failed_killable() for the slow path.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-7-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is no longer used anywhere and all callers (__down_write()) use
0 as a subclass. Ditch __down_write_nested() to make the code easier
to follow.
This shouldn't introduce any functional change.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-2-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This function compiles to 1328 bytes of machine code. Three callsites.
Registering a new lock class is definitely not *that* time-critical to inline it.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1460141926-13069-5-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It has been found that paths that invoke cleanups through
lock_torture_cleanup() can trigger NULL pointer dereferencing
bugs during the statistics printing phase. This is mainly
because we should not be calling into statistics before we are
sure things have been set up correctly.
Specifically, early checks (and the need for handling this in
the cleanup call) only include parameter checks and basic
statistics allocation. Once we start write/read kthreads
we then consider the test as started. As such, update the function
in question to check for cxt.lwsa writer stats, if not set,
we either have a bogus parameter or -ENOMEM situation and
therefore only need to deal with general torture calls.
Reported-and-tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bobby.prani@gmail.com
Cc: dhowells@redhat.com
Cc: dipankar@in.ibm.com
Cc: dvhart@linux.intel.com
Cc: edumazet@google.com
Cc: fweisbec@gmail.com
Cc: jiangshanlai@gmail.com
Cc: josh@joshtriplett.org
Cc: mathieu.desnoyers@efficios.com
Cc: oleg@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1460476038-27060-2-git-send-email-paulmck@linux.vnet.ibm.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For the case of rtmutex torturing we will randomly call into the
boost() handler, including upon module exiting when the tasks are
deboosted before stopping. In such cases the task may or may not have
already been boosted, and therefore the NULL being explicitly passed
can occur anywhere. Currently we only assume that the task will is
at a higher prio, and in consequence, dereference a NULL pointer.
This patch fixes the case of a rmmod locktorture exploding while
pounding on the rtmutex lock (partial trace):
task: ffff88081026cf80 ti: ffff880816120000 task.ti: ffff880816120000
RSP: 0018:ffff880816123eb0 EFLAGS: 00010206
RAX: ffff88081026cf80 RBX: ffff880816bfa630 RCX: 0000000000160d1b
RDX: 0000000000000000 RSI: 0000000000000202 RDI: 0000000000000000
RBP: ffff88081026cf80 R08: 000000000000001f R09: ffff88017c20ca80
R10: 0000000000000000 R11: 000000000048c316 R12: ffffffffa05d1840
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88203f880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000001c0a000 CR4: 00000000000406e0
Stack:
ffffffffa05d141d ffff880816bfa630 ffffffffa05d1922 ffff88081e70c2c0
ffff880816bfa630 ffffffff81095fed 0000000000000000 ffffffff8107bf60
ffff880816bfa630 ffffffff00000000 ffff880800000000 ffff880816123f08
Call Trace:
[<ffffffff81095fed>] kthread+0xbd/0xe0
[<ffffffff815cf40f>] ret_from_fork+0x3f/0x70
This patch ensures that if the random state pointer is not NULL and current
is not boosted, then do nothing.
RIP: 0010:[<ffffffffa05c6185>] [<ffffffffa05c6185>] torture_random+0x5/0x60 [torture]
[<ffffffffa05d141d>] torture_rtmutex_boost+0x1d/0x90 [locktorture]
[<ffffffffa05d1922>] lock_torture_writer+0xe2/0x170 [locktorture]
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bobby.prani@gmail.com
Cc: dhowells@redhat.com
Cc: dipankar@in.ibm.com
Cc: dvhart@linux.intel.com
Cc: edumazet@google.com
Cc: fweisbec@gmail.com
Cc: jiangshanlai@gmail.com
Cc: josh@joshtriplett.org
Cc: mathieu.desnoyers@efficios.com
Cc: oleg@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1460476038-27060-1-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A sequence of pairs [class_idx -> corresponding chain_key iteration]
is printed for both the current held_lock chain and the cached chain.
That exposes the two different class_idx sequences that led to that
particular hash value.
This helps with debugging hash chain collision reports.
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: sedat.dilek@gmail.com
Cc: tytso@mit.edu
Link: http://lkml.kernel.org/r/1459357416-19190-1-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing). Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system. A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/). However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.
kcov does not aim to collect as much coverage as possible. It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g. scheduler, locking).
Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes. Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch). I've
dropped the second mode for simplicity.
This patch adds the necessary support on kernel side. The complimentary
compiler support was added in gcc revision 231296.
We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:
https://github.com/google/syzkaller/wiki/Found-Bugs
We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation". For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.
Why not gcov. Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat. A
typical coverage can be just a dozen of basic blocks (e.g. an invalid
input). In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M). Cost of
kcov depends only on number of executed basic blocks/edges. On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.
kcov exposes kernel PCs and control flow to user-space which is
insecure. But debugfs should not be mapped as user accessible.
Based on a patch by Quentin Casasnovas.
[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
$ make tags
GEN tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"
Which are all the result of the DEFINE_PER_CPU pattern:
scripts/tags.sh:200: '/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
scripts/tags.sh:201: '/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'
The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add detection for chain_key collision under CONFIG_DEBUG_LOCKDEP.
When a collision is detected the problem is reported and all lock
debugging is turned off.
Tested using liblockdep and the added tests before and after
applying the fix, confirming both that the code added for the
detection correctly reports the problem and that the fix actually
fixes it.
Tested tweaking lockdep to generate false collisions and
verified that the problem is reported and that lock debugging is
turned off.
Also tested with lockdep's test suite after applying the patch:
[ 0.000000] Good, all 253 testcases passed! |
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezernandez@gmail.com>
Cc: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sasha.levin@oracle.com
Link: http://lkml.kernel.org/r/1455864533-7536-4-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The chain_key hashing macro iterate_chain_key(key1, key2) does not
generate a new different value if both key1 and key2 are 0. In that
case the generated value is again 0. This can lead to collisions which
can result in lockdep not detecting deadlocks or circular
dependencies.
Avoid the problem by using class_idx (1-based) instead of class id
(0-based) as an input for the hashing macro 'key2' in
iterate_chain_key(key1, key2).
The use of class id created collisions in cases like the following:
1.- Consider an initial state in which no class has been acquired yet.
Under these circumstances an AA deadlock will not be detected by
lockdep:
lock [key1,key2]->new key (key1=old chain_key, key2=id)
--------------------------
A [0,0]->0
A [0,0]->0 (collision)
The newly generated chain_key collides with the one used before and as
a result the check for a deadlock is skipped
A simple test using liblockdep and a pthread mutex confirms the
problem: (omitting stack traces)
new class 0xe15038: 0x7ffc64950f20
acquire class [0xe15038] 0x7ffc64950f20
acquire class [0xe15038] 0x7ffc64950f20
hash chain already cached, key: 0000000000000000 tail class:
[0xe15038] 0x7ffc64950f20
2.- Consider an ABBA in 2 different tasks and no class yet acquired.
T1 [key1,key2]->new key T2[key1,key2]->new key
-- --
A [0,0]->0
B [0,1]->1
B [0,1]->1 (collision)
A
In this case the collision prevents lockdep from creating the new
dependency A->B. This in turn results in lockdep not detecting the
circular dependency when T2 acquires A.
Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezernandez@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: sasha.levin@oracle.com
Link: http://lkml.kernel.org/r/1455147212-2389-4-git-send-email-alfredoalvarezernandez@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make use of wake-queues and enable the wakeup to occur after releasing the
wait_lock. This is similar to what we do with rtmutex top waiter,
slightly shortening the critical region and allow other waiters to
acquire the wait_lock sooner. In low contention cases it can also help
the recently woken waiter to find the wait_lock available (fastpath)
when it continues execution.
Reviewed-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Waiman Long <waiman.long@hpe.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Link: http://lkml.kernel.org/r/20160125022343.GA3322@linux-uzut.site
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch enables the tracking of the number of slowpath locking
operations performed. This can be used to compare against the number
of lock stealing operations to see what percentage of locks are stolen
versus acquired via the regular slowpath.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1449778666-13593-2-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The newly introduced smp_cond_acquire() was used to replace the
slowpath lock acquisition loop. Similarly, the new function can also
be applied to the pending bit locking loop. This patch uses the new
function in that loop.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1449778666-13593-1-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch moves the lock stealing count tracking code into
pv_queued_spin_steal_lock() instead of via a jacket function simplifying
the code.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1449778666-13593-3-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to commit b4b29f9485 ("locking/osq: Fix ordering of node
initialisation in osq_lock") the use of xchg_acquire() is
fundamentally broken with MCS like constructs.
Furthermore, it turns out we rely on the global transitivity of this
operation because the unlock path observes the pointer with a
READ_ONCE(), not an smp_load_acquire().
This is non-critical because the MCS code isn't actually used and
mostly serves as documentation, a stepping stone to the more complex
things we've build on top of the idea.
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: 3552a07a9c ("locking/mcs: Use acquire/release semantics")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep is initialized at compile time now. Get rid of lockdep_init().
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: mm-commits@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mike said:
: CONFIG_UBSAN_ALIGNMENT breaks x86-64 kernel with lockdep enabled, i.e.
: kernel with CONFIG_UBSAN_ALIGNMENT=y fails to load without even any error
: message.
:
: The problem is that ubsan callbacks use spinlocks and might be called
: before lockdep is initialized. Particularly this line in the
: reserve_ebda_region function causes problem:
:
: lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
:
: If i put lockdep_init() before reserve_ebda_region call in
: x86_64_start_reservations kernel loads well.
Fix this ordering issue permanently: change lockdep so that it uses hlists
for the hash tables. Unlike a list_head, an hlist_head is in its
initialized state when it is all-zeroes, so lockdep is ready for operation
immediately upon boot - lockdep_init() need not have run.
The patch will also save some memory.
Probably lockdep_init() and lockdep_initialized can be done away with now.
Suggested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: mm-commits@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
check_prev_add() caches saved stack trace in static trace variable
to avoid duplicate save_trace() calls in dependencies involving trylocks.
But that caching logic contains a bug. We may not save trace on first
iteration due to early return from check_prev_add(). Then on the
second iteration when we actually need the trace we don't save it
because we think that we've already saved it.
Let check_prev_add() itself control when stack is saved.
There is another bug. Trace variable is protected by graph lock.
But we can temporary release graph lock during printing.
Fix this by invalidating cached stack trace when we release graph lock.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: glider@google.com
Cc: kcc@google.com
Cc: peter@hurleysoftware.com
Cc: sasha.levin@oracle.com
Link: http://lkml.kernel.org/r/1454593240-121647-1-git-send-email-dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sasha reported a lockdep splat about a potential deadlock between RCU boosting
rtmutex and the posix timer it_lock.
CPU0 CPU1
rtmutex_lock(&rcu->rt_mutex)
spin_lock(&rcu->rt_mutex.wait_lock)
local_irq_disable()
spin_lock(&timer->it_lock)
spin_lock(&rcu->mutex.wait_lock)
--> Interrupt
spin_lock(&timer->it_lock)
This is caused by the following code sequence on CPU1
rcu_read_lock()
x = lookup();
if (x)
spin_lock_irqsave(&x->it_lock);
rcu_read_unlock();
return x;
We could fix that in the posix timer code by keeping rcu read locked across
the spinlocked and irq disabled section, but the above sequence is common and
there is no reason not to support it.
Taking rt_mutex.wait_lock irq safe prevents the deadlock.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Pull locking updates from Ingo Molnar:
"So we have a laundry list of locking subsystem changes:
- continuing barrier API and code improvements
- futex enhancements
- atomics API improvements
- pvqspinlock enhancements: in particular lock stealing and adaptive
spinning
- qspinlock micro-enhancements"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op
futex: Cleanup the goto confusion in requeue_pi()
futex: Remove pointless put_pi_state calls in requeue()
futex: Document pi_state refcounting in requeue code
futex: Rename free_pi_state() to put_pi_state()
futex: Drop refcount if requeue_pi() acquired the rtmutex
locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
lcoking/barriers, arch: Use smp barriers in smp_store_release()
locking/cmpxchg, arch: Remove tas() definitions
locking/pvqspinlock: Queue node adaptive spinning
locking/pvqspinlock: Allow limited lock stealing
locking/pvqspinlock: Collect slowpath lock statistics
sched/core, locking: Document Program-Order guarantees
locking, sched: Introduce smp_cond_acquire() and use it
locking/pvqspinlock, x86: Optimize the PV unlock code path
locking/qspinlock: Avoid redundant read of next pointer
locking/qspinlock: Prefetch the next node cacheline
locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg()
atomics: Add test for atomic operations with _relaxed variants
The Cavium guys reported a soft lockup on their arm64 machine, caused by
commit c55a6ffa62 ("locking/osq: Relax atomic semantics"):
mutex_optimistic_spin+0x9c/0x1d0
__mutex_lock_slowpath+0x44/0x158
mutex_lock+0x54/0x58
kernfs_iop_permission+0x38/0x70
__inode_permission+0x88/0xd8
inode_permission+0x30/0x6c
link_path_walk+0x68/0x4d4
path_openat+0xb4/0x2bc
do_filp_open+0x74/0xd0
do_sys_open+0x14c/0x228
SyS_openat+0x3c/0x48
el0_svc_naked+0x24/0x28
This is because in osq_lock we initialise the node for the current CPU:
node->locked = 0;
node->next = NULL;
node->cpu = curr;
and then publish the current CPU in the lock tail:
old = atomic_xchg_acquire(&lock->tail, curr);
Once the update to lock->tail is visible to another CPU, the node is
then live and can be both read and updated by concurrent lockers.
Unfortunately, the ACQUIRE semantics of the xchg operation mean that
there is no guarantee the contents of the node will be visible before
lock tail is updated. This can lead to lock corruption when, for
example, a concurrent locker races to set the next field.
Fixes: c55a6ffa62 ("locking/osq: Relax atomic semantics"):
Reported-by: David Daney <ddaney@caviumnetworks.com>
Reported-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Tested-by: Andrew Pinski <andrew.pinski@caviumnetworks.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1449856001-21177-1-git-send-email-will.deacon@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In an overcommitted guest where some vCPUs have to be halted to make
forward progress in other areas, it is highly likely that a vCPU later
in the spinlock queue will be spinning while the ones earlier in the
queue would have been halted. The spinning in the later vCPUs is then
just a waste of precious CPU cycles because they are not going to
get the lock soon as the earlier ones have to be woken up and take
their turn to get the lock.
This patch implements an adaptive spinning mechanism where the vCPU
will call pv_wait() if the previous vCPU is not running.
Linux kernel builds were run in KVM guest on an 8-socket, 4
cores/socket Westmere-EX system and a 4-socket, 8 cores/socket
Haswell-EX system. Both systems are configured to have 32 physical
CPUs. The kernel build times before and after the patch were:
Westmere Haswell
Patch 32 vCPUs 48 vCPUs 32 vCPUs 48 vCPUs
----- -------- -------- -------- --------
Before patch 3m02.3s 5m00.2s 1m43.7s 3m03.5s
After patch 3m03.0s 4m37.5s 1m43.0s 2m47.2s
For 32 vCPUs, this patch doesn't cause any noticeable change in
performance. For 48 vCPUs (over-committed), there is about 8%
performance improvement.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-8-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch allows one attempt for the lock waiter to steal the lock
when entering the PV slowpath. To prevent lock starvation, the pending
bit will be set by the queue head vCPU when it is in the active lock
spinning loop to disable any lock stealing attempt. This helps to
reduce the performance penalty caused by lock waiter preemption while
not having much of the downsides of a real unfair lock.
The pv_wait_head() function was renamed as pv_wait_head_or_lock()
as it was modified to acquire the lock before returning. This is
necessary because of possible lock stealing attempts from other tasks.
Linux kernel builds were run in KVM guest on an 8-socket, 4
cores/socket Westmere-EX system and a 4-socket, 8 cores/socket
Haswell-EX system. Both systems are configured to have 32 physical
CPUs. The kernel build times before and after the patch were:
Westmere Haswell
Patch 32 vCPUs 48 vCPUs 32 vCPUs 48 vCPUs
----- -------- -------- -------- --------
Before patch 3m15.6s 10m56.1s 1m44.1s 5m29.1s
After patch 3m02.3s 5m00.2s 1m43.7s 3m03.5s
For the overcommited case (48 vCPUs), this patch is able to reduce
kernel build time by more than 54% for Westmere and 44% for Haswell.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447190336-53317-1-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch enables the accumulation of kicking and waiting related
PV qspinlock statistics when the new QUEUED_LOCK_STAT configuration
option is selected. It also enables the collection of data which
enable us to calculate the kicking and wakeup latencies which have
a heavy dependency on the CPUs being used.
The statistical counters are per-cpu variables to minimize the
performance overhead in their updates. These counters are exported
via the debugfs filesystem under the qlockstat directory. When the
corresponding debugfs files are read, summation and computing of the
required data are then performed.
The measured latencies for different CPUs are:
CPU Wakeup Kicking
--- ------ -------
Haswell-EX 63.6us 7.4us
Westmere-EX 67.6us 9.3us
The measured latencies varied a bit from run-to-run. The wakeup
latency is much higher than the kicking latency.
A sample of statistical counters after system bootup (with vCPU
overcommit) was:
pv_hash_hops=1.00
pv_kick_unlock=1148
pv_kick_wake=1146
pv_latency_kick=11040
pv_latency_wake=194840
pv_spurious_wakeup=7
pv_wait_again=4
pv_wait_head=23
pv_wait_node=1129
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-6-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce smp_cond_acquire() which combines a control dependency and a
read barrier to form acquire semantics.
This primitive has two benefits:
- it documents control dependencies,
- its typically cheaper than using smp_load_acquire() in a loop.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The unlock function in queued spinlocks was optimized for better
performance on bare metal systems at the expense of virtualized guests.
For x86-64 systems, the unlock call needs to go through a
PV_CALLEE_SAVE_REGS_THUNK() which saves and restores 8 64-bit
registers before calling the real __pv_queued_spin_unlock()
function. The thunk code may also be in a separate cacheline from
__pv_queued_spin_unlock().
This patch optimizes the PV unlock code path by:
1) Moving the unlock slowpath code from the fastpath into a separate
__pv_queued_spin_unlock_slowpath() function to make the fastpath
as simple as possible..
2) For x86-64, hand-coded an assembly function to combine the register
saving thunk code with the fastpath code. Only registers that
are used in the fastpath will be saved and restored. If the
fastpath fails, the slowpath function will be called via another
PV_CALLEE_SAVE_REGS_THUNK(). For 32-bit, it falls back to the C
__pv_queued_spin_unlock() code as the thunk saves and restores
only one 32-bit register.
With a microbenchmark of 5M lock-unlock loop, the table below shows
the execution times before and after the patch with different number
of threads in a VM running on a 32-core Westmere-EX box with x86-64
4.2-rc1 based kernels:
Threads Before patch After patch % Change
------- ------------ ----------- --------
1 134.1 ms 119.3 ms -11%
2 1286 ms 953 ms -26%
3 3715 ms 3480 ms -6.3%
4 4092 ms 3764 ms -8.0%
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-5-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With optimistic prefetch of the next node cacheline, the next pointer
may have been properly inititalized. As a result, the reading
of node->next in the contended path may be redundant. This patch
eliminates the redundant read if the next pointer value is not NULL.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-4-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A queue head CPU, after acquiring the lock, will have to notify
the next CPU in the wait queue that it has became the new queue
head. This involves loading a new cacheline from the MCS node of the
next CPU. That operation can be expensive and add to the latency of
locking operation.
This patch addes code to optmistically prefetch the next MCS node
cacheline if the next pointer is defined and it has been spinning
for the MCS lock for a while. This reduces the locking latency and
improves the system throughput.
The performance change will depend on whether the prefetch overhead
can be hidden within the latency of the lock spin loop. On really
short critical section, there may not be performance gain at all. With
longer critical section, however, it was found to have a performance
boost of 5-10% over a range of different queue depths with a spinlock
loop microbenchmark.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-3-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch replaces the cmpxchg() and xchg() calls in the native
qspinlock code with the more relaxed _acquire or _release versions of
those calls to enable other architectures to adopt queued spinlocks
with less memory barrier performance overhead.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1447114167-47185-2-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There were still a number of references to my old Red Hat email
address in the kernel source. Remove these while keeping the
Red Hat copyright notices intact.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle were:
- sched/fair load tracking fixes and cleanups (Byungchul Park)
- Make load tracking frequency scale invariant (Dietmar Eggemann)
- sched/deadline updates (Juri Lelli)
- stop machine fixes, cleanups and enhancements for bugs triggered by
CPU hotplug stress testing (Oleg Nesterov)
- scheduler preemption code rework: remove PREEMPT_ACTIVE and related
cleanups (Peter Zijlstra)
- Rework the sched_info::run_delay code to fix races (Peter Zijlstra)
- Optimize per entity utilization tracking (Peter Zijlstra)
- ... misc other fixes, cleanups and smaller updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
sched: Don't scan all-offline ->cpus_allowed twice if !CONFIG_CPUSETS
sched: Move cpu_active() tests from stop_two_cpus() into migrate_swap_stop()
sched: Start stopper early
stop_machine: Kill cpu_stop_threads->setup() and cpu_stop_unpark()
stop_machine: Kill smp_hotplug_thread->pre_unpark, introduce stop_machine_unpark()
stop_machine: Change cpu_stop_queue_two_works() to rely on stopper->enabled
stop_machine: Introduce __cpu_stop_queue_work() and cpu_stop_queue_two_works()
stop_machine: Ensure that a queued callback will be called before cpu_stop_park()
sched/x86: Fix typo in __switch_to() comments
sched/core: Remove a parameter in the migrate_task_rq() function
sched/core: Drop unlikely behind BUG_ON()
sched/core: Fix task and run queue sched_info::run_delay inconsistencies
sched/numa: Fix task_tick_fair() from disabling numa_balancing
sched/core: Add preempt_count invariant check
sched/core: More notrace annotations
sched/core: Kill PREEMPT_ACTIVE
sched/core, sched/x86: Kill thread_info::saved_preempt_count
sched/core: Simplify preempt_count tests
sched/core: Robustify preemption leak checks
sched/core: Stop setting PREEMPT_ACTIVE
...
Pull locking changes from Ingo Molnar:
"The main changes in this cycle were:
- More gradual enhancements to atomic ops: new atomic*_read_ctrl()
ops, synchronize atomic_{read,set}() ordering requirements between
architectures, add atomic_long_t bitops. (Peter Zijlstra)
- Add _{relaxed|acquire|release}() variants for inc/dec atomics and
use them in various locking primitives: mutex, rtmutex, mcs, rwsem.
This enables weakly ordered architectures (such as arm64) to make
use of more locking related optimizations. (Davidlohr Bueso)
- Implement atomic[64]_{inc,dec}_relaxed() on ARM. (Will Deacon)
- Futex kernel data cache footprint micro-optimization. (Rasmus
Villemoes)
- pvqspinlock runtime overhead micro-optimization. (Waiman Long)
- misc smaller fixlets"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM, locking/atomics: Implement _relaxed variants of atomic[64]_{inc,dec}
locking/rwsem: Use acquire/release semantics
locking/mcs: Use acquire/release semantics
locking/rtmutex: Use acquire/release semantics
locking/mutex: Use acquire/release semantics
locking/asm-generic: Add _{relaxed|acquire|release}() variants for inc/dec atomics
atomic: Implement atomic_read_ctrl()
atomic, arch: Audit atomic_{read,set}()
atomic: Add atomic_long_t bitops
futex: Force hot variables into a single cache line
locking/pvqspinlock: Kick the PV CPU unconditionally when _Q_SLOW_VAL
locking/osq: Relax atomic semantics
locking/qrwlock: Rename ->lock to ->wait_lock
locking/Documentation/lockstat: Fix typo - lokcing -> locking
locking/atomics, cmpxchg: Privatize the inclusion of asm/cmpxchg.h
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes. (Paul E. McKenney, Boqun Feng, Oleg Nesterov, Patrick Marlier)
- Improvements to expedited grace periods. (Paul E. McKenney)
- Performance improvements to and locktorture tests for percpu-rwsem.
(Oleg Nesterov, Paul E. McKenney)
- Torture-test changes. (Paul E. McKenney, Davidlohr Bueso)
- Documentation updates. (Paul E. McKenney)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The locktorture module has a list of torture types, and specifying
a type not on this list is supposed to cleanly fail the module load.
Unfortunately, the "fail" happens without the "cleanly". This commit
therefore adds the needed clean-up after an incorrect torture_type.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Based on Peter Zijlstra's earlier patch.
Change percpu_down_read() to use __down_read(), this way we can
do rwsem_acquire_read() unconditionally at the start to make this
code more symmetric and clean.
Originally-From: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Update the comments broken by the previous change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently down_write/up_write calls synchronize_sched_expedited()
twice, which is evil. Change this code to rely on rcu-sync primitives.
This avoids the _expedited "big hammer", and this can be faster in
the contended case or even in the case when a single thread does
down_write/up_write in a loop.
Of course, a single down_write() will take more time, but otoh it
will be much more friendly to the whole system.
To simplify the review this patch doesn't update the comments, fixed
by the next change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This is the temporary ugly hack which will be reverted later. We only
need it to ensure that the next patch will not break "change sb_writers
to use percpu_rw_semaphore" patches routed via the VFS tree.
The alloc_super()->destroy_super() error path assumes that it is safe
to call percpu_free_rwsem() after kzalloc() without percpu_init_rwsem(),
so let's not disappoint it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds percpu_rwsem tests based on the earlier rwsem tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit exports percpu_down_read(), percpu_down_write(),
__percpu_init_rwsem(), percpu_up_read(), and percpu_up_write() to allow
locktorture to test them when built as a module.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Real time mutexes is one of the few general primitives
that we do not have in locktorture. Address this -- a few
considerations:
o To spice things up, enable competing thread(s) to become
rt, such that we can stress different prio boosting paths
in the rtmutex code. Introduce a ->task_boost callback,
only used by rtmutex-torturer. Tasks will boost/deboost
around every 50k (arbitrarily) lock/unlock operations.
o Hold times are similar to what we have for other locks:
only occasionally having longer hold times (per ~200k ops).
So we roughly do two full rt boost+deboosting ops with
short hold times.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
As of 654672d4ba (locking/atomics: Add _{acquire|release|relaxed}()
variants of some atomic operations) and 6d79ef2d30 (locking, asm-generic:
Add _{relaxed|acquire|release}() variants for 'atomic_long_t'), weakly
ordered archs can benefit from more relaxed use of barriers when locking
and unlocking, instead of regular full barrier semantics. While currently
only arm64 supports such optimizations, updating corresponding locking
primitives serves for other archs to immediately benefit as well, once the
necessary machinery is implemented of course.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443643395-17016-6-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As of 654672d4ba (locking/atomics: Add _{acquire|release|relaxed}()
variants of some atomic operations) and 6d79ef2d30 (locking, asm-generic:
Add _{relaxed|acquire|release}() variants for 'atomic_long_t'), weakly
ordered archs can benefit from more relaxed use of barriers when locking
and unlocking, instead of regular full barrier semantics. While currently
only arm64 supports such optimizations, updating corresponding locking
primitives serves for other archs to immediately benefit as well, once the
necessary machinery is implemented of course.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443643395-17016-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As of 654672d4ba (locking/atomics: Add _{acquire|release|relaxed}()
variants of some atomic operations) and 6d79ef2d30 (locking, asm-generic:
Add _{relaxed|acquire|release}() variants for 'atomic_long_t'), weakly
ordered archs can benefit from more relaxed use of barriers when locking
and unlocking, instead of regular full barrier semantics. While currently
only arm64 supports such optimizations, updating corresponding locking
primitives serves for other archs to immediately benefit as well, once the
necessary machinery is implemented of course.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443643395-17016-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As of 654672d4ba (locking/atomics: Add _{acquire|release|relaxed}()
variants of some atomic operations) and 6d79ef2d30 (locking, asm-generic:
Add _{relaxed|acquire|release}() variants for 'atomic_long_t'), weakly
ordered archs can benefit from more relaxed use of barriers when locking
and unlocking, instead of regular full barrier semantics. While currently
only arm64 supports such optimizations, updating corresponding locking
primitives serves for other archs to immediately benefit as well, once the
necessary machinery is implemented of course.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1443643395-17016-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rt_mutex_waiter_less() check of task deadlines is open coded. Since this
is subject to wraparound bugs, make it use the correct helper.
Reported-by: Luca Abeni <luca.abeni@unitn.it>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441188096-23021-4-git-send-email-juri.lelli@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Various people reported hitting the "unpinning an unpinned lock"
warning. As it turns out there are 2 places where we take a lock out
of the middle of a stack, and in those cases it would fail to preserve
the pin_count when rebuilding the lock stack.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Tim Spriggs <tspriggs@apple.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davej@codemonkey.org.uk
Link: http://lkml.kernel.org/r/20150916141040.GA11639@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If _Q_SLOW_VAL has been set, the vCPU state must have been vcpu_hashed.
The extra check at the end of __pv_queued_spin_unlock() is unnecessary
and can be removed.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441996658-62854-3-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... by using acquire/release for ops around the lock->tail. As such,
weakly ordered archs can benefit from more relaxed use of barriers
when issuing atomics.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1442216244-4409-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... trivial, but reads a little nicer when we name our
actual primitive 'lock'.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1442216244-4409-1-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull locking fixes from Ingo Molnar:
"Spinlock performance regression fix, plus documentation fixes"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/static_keys: Fix up the static keys documentation
locking/qspinlock/x86: Only emit the test-and-set fallback when building guest support
locking/qspinlock/x86: Fix performance regression under unaccelerated VMs
locking/static_keys: Fix a silly typo
Dave ran into horrible performance on a VM without PARAVIRT_SPINLOCKS
set and Linus noted that the test-and-set implementation was retarded.
One should spin on the variable with a load, not a RMW.
While there, remove 'queued' from the name, as the lock isn't queued
at all, but a simple test-and-set.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Tested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lkml.kernel.org/r/20150904152523.GR18673@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
The qrwlock implementation is slightly heavy in its use of memory
barriers, mainly through the use of _cmpxchg() and _return() atomics, which
imply full barrier semantics.
This patch modifies the qrwlock code to use the more relaxed atomic
routines so that we can reduce the unnecessary barrier overhead on
weakly-ordered architectures.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1438880084-18856-7-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For an over-committed guest with more vCPUs than physical CPUs
available, it is possible that a vCPU may be kicked twice before
getting the lock - once before it becomes queue head and once again
before it gets the lock. All these CPU kicking and halting (VMEXIT)
can be expensive and slow down system performance.
This patch adds a new vCPU state (vcpu_hashed) which enables the code
to delay CPU kicking until at unlock time. Once this state is set,
the new lock holder will set _Q_SLOW_VAL and fill in the hash table
on behalf of the halted queue head vCPU. The original vcpu_halted
state will be used by pv_wait_node() only to differentiate other
queue nodes from the qeue head.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1436647018-49734-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, a reader will check first to make sure that the writer mode
byte is cleared before incrementing the reader count. That waiting is
not really necessary. It increases the latency in the reader/writer
to reader transition and reduces readers performance.
This patch eliminates that waiting. It also has the side effect
of reducing the chance of writer lock stealing and improving the
fairness of the lock. Using a locking microbenchmark, a 10-threads 5M
locking loop of mostly readers (RW ratio = 10,000:1) has the following
performance numbers in a Haswell-EX box:
Kernel Locking Rate (Kops/s)
------ ---------------------
4.1.1 15,063,081
4.1.1+patch 17,241,552 (+14.4%)
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1436459543-29126-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we unlock in __pv_queued_spin_unlock(), a failed cmpxchg() on the lock
value indicates that we need to take the slow-path and unhash the
corresponding node blocked on the lock.
Since a failed cmpxchg() does not provide any memory-ordering guarantees,
it is possible that the node data could be read before the cmpxchg() on
weakly-ordered architectures and therefore return a stale value, leading
to hash corruption and/or a BUG().
This patch adds an smb_rmb() following the failed cmpxchg operation, so
that the unhashing is ordered after the lock has been checked.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[ Added more comments]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steve Capper <Steve.Capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150713155830.GL2632@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Rename the on-stack variable to match the datastructure variable,
- place the cmpxchg back under the comment that explains it,
- clean up the WARN() statement to avoid superfluous conditionals
and line-breaks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Enabling locking-selftest in a VM guest may cause the following
kernel panic:
kernel BUG at .../kernel/locking/qspinlock_paravirt.h:137!
This is due to the fact that the pvqspinlock unlock function is
expecting either a _Q_LOCKED_VAL or _Q_SLOW_VAL in the lock
byte. This patch prevents that bug report by ignoring it when
debug_locks_silent is set. Otherwise, a warning will be printed
if it contains an unexpected value.
With this patch applied, the kernel locking-selftest completed
without any noise.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1436663959-53092-1-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No one uses this anymore, and this is not the first time the
idea of replacing it with a (now possible) userspace side.
Lock stealing logic was removed long ago in when the lock
was granted to the highest prio.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1435782588-4177-2-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The qrwlock is fair in the process context, but becoming unfair when
in the interrupt context to support use cases like the tasklist_lock.
The current code isn't that well-documented on what happens when
in the interrupt context. The rspin_until_writer_unlock() will only
spin if the writer has gotten the lock. If the writer is still in the
waiting state, the increment in the reader count will cause the writer
to remain in the waiting state and the new interrupt context reader
will get the lock and return immediately. The current code, however,
does an additional read of the lock value which is not necessary as
the information has already been there in the fast path. This may
sometime cause an additional cacheline transfer when the lock is
highly contended.
This patch passes the lock value information gotten in the fast path
to the slow path to eliminate the additional read. It also documents
the action for the interrupt context readers more clearly.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1434729002-57724-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
To sync up with the naming convention used in qspinlock, all the
qrwlock functions were renamed to started with "queued" instead of
"queue".
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1434729002-57724-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler updates from Thomas Gleixner:
"This series of scheduler updates depends on sched/core and timers/core
branches, which are already in your tree:
- Scheduler balancing overhaul to plug a hard to trigger race which
causes an oops in the balancer (Peter Zijlstra)
- Lockdep updates which are related to the balancing updates (Peter
Zijlstra)"
* 'sched-hrtimers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched,lockdep: Employ lock pinning
lockdep: Implement lock pinning
lockdep: Simplify lock_release()
sched: Streamline the task migration locking a little
sched: Move code around
sched,dl: Fix sched class hopping CBS hole
sched, dl: Convert switched_{from, to}_dl() / prio_changed_dl() to balance callbacks
sched,dl: Remove return value from pull_dl_task()
sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks
sched,rt: Remove return value from pull_rt_task()
sched: Allow balance callbacks for check_class_changed()
sched: Use replace normalize_task() with __sched_setscheduler()
sched: Replace post_schedule with a balance callback list
Pull locking updates from Thomas Gleixner:
"These locking updates depend on the alreay merged sched/core branch:
- Lockless top waiter wakeup for rtmutex (Davidlohr)
- Reduce hash bucket lock contention for PI futexes (Sebastian)
- Documentation update (Davidlohr)"
* 'sched-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Update stale plist comments
futex: Lower the lock contention on the HB lock during wake up
locking/rtmutex: Implement lockless top-waiter wakeup
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert 095bebf61a ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
Pull locking updates from Ingo Molnar:
"The main changes are:
- 'qspinlock' support, enabled on x86: queued spinlocks - these are
now the spinlock variant used by x86 as they outperform ticket
spinlocks in every category. (Waiman Long)
- 'pvqspinlock' support on x86: paravirtualized variant of queued
spinlocks. (Waiman Long, Peter Zijlstra)
- 'qrwlock' support, enabled on x86: queued rwlocks. Similar to
queued spinlocks, they are now the variant used by x86:
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
- various lockdep fixlets
- various locking primitives cleanups, further WRITE_ONCE()
propagation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/lockdep: Remove hard coded array size dependency
locking/qrwlock: Don't contend with readers when setting _QW_WAITING
lockdep: Do not break user-visible string
locking/arch: Rename set_mb() to smp_store_mb()
locking/arch: Add WRITE_ONCE() to set_mb()
rtmutex: Warn if trylock is called from hard/softirq context
arch: Remove __ARCH_HAVE_CMPXCHG
locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG
locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS
locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS
locking/pvqspinlock: Replace xchg() by the more descriptive set_mb()
locking/pvqspinlock, x86: Enable PV qspinlock for Xen
locking/pvqspinlock, x86: Enable PV qspinlock for KVM
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching
locking/pvqspinlock: Implement simple paravirt support for the qspinlock
locking/qspinlock: Revert to test-and-set on hypervisors
locking/qspinlock: Use a simple write to grab the lock
locking/qspinlock: Optimize for smaller NR_CPUS
locking/qspinlock: Extract out code snippets for the next patch
locking/qspinlock: Add pending bit
...
Pull RCU updates from Ingo Molnar:
- Continued initialization/Kconfig updates: hide most Kconfig options
from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single
interactive configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically. Later
on we'll remove this single leftover configuration option as well.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and
rcu_lockdep_assert()
- RCU CPU-hotplug cleanups
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes
- Documentation updates
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcutorture: Allow repetition factors in Kconfig-fragment lists
rcutorture: Display "make oldconfig" errors
rcutorture: Update TREE_RCU-kconfig.txt
rcutorture: Make rcutorture scripts force RCU_EXPERT
rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
rcutorture: TASKS_RCU set directly, so don't explicitly set it
rcutorture: Test SRCU cleanup code path
rcutorture: Replace barriers with smp_store_release() and smp_load_acquire()
locktorture: Change longdelay_us to longdelay_ms
rcutorture: Allow negative values of nreaders to oversubscribe
rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
rcutorture: Exchange TREE03 and TREE04 geometries
locktorture: fix deadlock in 'rw_lock_irq' type
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
rcu: Further shrink Tiny RCU by making empty functions static inlines
rcu: Conditionally compile RCU's eqs warnings
rcu: Remove prompt for RCU implementation
rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO
rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF
...
... as of fb00aca474 (rtmutex: Turn the plist into an rb-tree) we
no longer use plists for queuing any waiters. Update stale comments.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1432056298-18738-4-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
wake_futex_pi() wakes the task before releasing the hash bucket lock
(HB). The first thing the woken up task usually does is to acquire the
lock which requires the HB lock. On SMP Systems this leads to blocking
on the HB lock which is released by the owner shortly after.
This patch rearranges the unlock path by first releasing the HB lock and
then waking up the task.
[ tglx: Fixed up the rtmutex unlock path ]
Originally-from: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: http://lkml.kernel.org/r/20150617083350.GA2433@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jiri reported a machine stuck in multi_cpu_stop() with
migrate_swap_stop() as function and with the following src,dst cpu
pairs: {11, 4} {13, 11} { 4, 13}
4 11 13
cpuM: queue(4 ,13)
*Ma
cpuN: queue(13,11)
*N Na
*M Mb
cpuO: queue(11, 4)
*O Oa
*Nb
*Ob
Where *X denotes the cpu running the queueing of cpu-X and X[ab] denotes
the first/second queued work.
You'll observe the top of the workqueue for each cpu: 4,11,13 to be work
from cpus: M, O, N resp. IOW. deadlock.
Do away with the queueing trickery and introduce lg_double_lock() to
lock both CPUs and fully serialize the stop_two_cpus() callers instead
of the partial (and buggy) serialization we have now.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150605153023.GH19282@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current cmpxchg() loop in setting the _QW_WAITING flag for writers
in queue_write_lock_slowpath() will contend with incoming readers
causing possibly extra cmpxchg() operations that are wasteful. This
patch changes the code to do a byte cmpxchg() to eliminate contention
with new readers.
A multithreaded microbenchmark running 5M read_lock/write_lock loop
on a 8-socket 80-core Westmere-EX machine running 4.0 based kernel
with the qspinlock patch have the following execution times (in ms)
with and without the patch:
With R:W ratio = 5:1
Threads w/o patch with patch % change
------- --------- ---------- --------
2 990 895 -9.6%
3 2136 1912 -10.5%
4 3166 2830 -10.6%
5 3953 3629 -8.2%
6 4628 4405 -4.8%
7 5344 5197 -2.8%
8 6065 6004 -1.0%
9 6826 6811 -0.2%
10 7599 7599 0.0%
15 9757 9766 +0.1%
20 13767 13817 +0.4%
With small number of contending threads, this patch can improve
locking performance by up to 10%. With more contending threads,
however, the gain diminishes.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433863153-30722-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a lockdep annotation that WARNs if you 'accidentially' unlock a
lock.
This is especially helpful for code with callbacks, where the upper
layer assumes a lock remains taken but a lower layer thinks it maybe
can drop and reacquire the lock.
By unwittingly breaking up the lock, races can be introduced.
Lock pinning is a lockdep annotation that helps with this, when you
lockdep_pin_lock() a held lock, any unlock without a
lockdep_unpin_lock() will produce a WARN. Think of this as a relative
of lockdep_assert_held(), except you don't only assert its held now,
but ensure it stays held until you release your assertion.
RFC: a possible alternative API would be something like:
int cookie = lockdep_pin_lock(&foo);
...
lockdep_unpin_lock(&foo, cookie);
Where we pick a random number for the pin_count; this makes it
impossible to sneak a lock break in without also passing the right
cookie along.
I've not done this because it ends up generating code for !LOCKDEP,
esp. if you need to pass the cookie around for some reason.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: ktkhai@parallels.com
Cc: rostedt@goodmis.org
Cc: juri.lelli@gmail.com
Cc: pang.xunlei@linaro.org
Cc: oleg@redhat.com
Cc: wanpeng.li@linux.intel.com
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20150611124743.906731065@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Mark the task for later wakeup after the wait_lock has been released.
This way, once the next task is awoken, it will have a better chance
to of finding the wait_lock free when continuing executing in
__rt_mutex_slowlock() when trying to acquire the rtmutex, calling
try_to_take_rt_mutex(). Upon contended scenarios, other tasks attempting
take the lock may acquire it first, right after the wait_lock is released,
but (a) this can also occur with the current code, as it relies on the
spinlock fairness, and (b) we are dealing with the top-waiter anyway,
so it will always take the lock next.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1432056298-18738-2-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The lock_class iteration of /proc/lock_stat is not serialized against
the lockdep_free_key_range() call from module unload.
Therefore it can happen that we find a class of which ->name/->key are
no longer valid.
There is a further bug in zap_class() that left ->name dangling. Cure
this. Use RCU_INIT_POINTER() because NULL.
Since lockdep_free_key_range() is rcu_sched serialized, we can read
both ->name and ->key under rcu_read_lock_sched() (preempt-disable)
and be assured that if we observe a !NULL value it stays safe to use
for as long as we hold that lock.
If we observe both NULL, skip the entry.
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Tested-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150602105013.GS3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the line-break in the user-visible string and add the
missing space in this error message:
WARNING: lockdep init error! lock-(console_sem).lock was acquiredbefore lockdep_init
Also:
- don't yell, it's just a debug warning
- denote references to function calls with '()'
- standardize the lock name quoting
- and finish the sentence.
The result:
WARNING: lockdep init error: lock '(console_sem).lock' was acquired before lockdep_init().
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150602133827.GD19887@pd.tnic
[ Added a few more stylistic tweaks to the error message. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The locktorture long delays are in milliseconds rather than microseconds,
so this commit changes the name of the corresponding variable from
longdelay_us to longdelay_ms.
Reported-by: Ben Goodwyn <bgoodwyn@softnas.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
torture_rwlock_read_unlock_irq() must use read_unlock_irqrestore()
instead of write_unlock_irqrestore().
Use read_unlock_irqrestore() instead of write_unlock_irqrestore().
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Since set_mb() is really about an smp_mb() -- not a IO/DMA barrier
like mb() rename it to match the recent smp_load_acquire() and
smp_store_release().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rt_mutex_trylock() must be called from thread context. It can be
called from atomic regions (preemption or interrupts disabled), but
not from hard/softirq/nmi context. Add a warning to alert abusers.
The reasons for this are:
1) There is a potential deadlock in the slowpath
2) Another cpu which blocks on the rtmutex will boost the task
which allegedly locked the rtmutex, but that cannot work
because the hard/softirq context borrows the task context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
The rtmutex code is the only user of __HAVE_ARCH_CMPXCHG and we have a few
other user of cmpxchg() which do not care about __HAVE_ARCH_CMPXCHG. This
define was first introduced in 23f78d4a0 ("[PATCH] pi-futex: rt mutex core")
which is v2.6.18. The generic cmpxchg was introduced later in 068fbad288
("Add cmpxchg_local to asm-generic for per cpu atomic operations") which is
v2.6.25.
Back then something was required to get rtmutex working with the fast
path on architectures without cmpxchg and this seems to be the result.
It popped up recently on rt-users because ARM (v6+) does not define
__HAVE_ARCH_CMPXCHG (even that it implements it) which results in slower
locking performance in the fast path.
To put some numbers on it: preempt -RT, am335x, 10 loops of
100000 invocations of rt_spin_lock() + rt_spin_unlock() (time "total" is
the average of the 10 loops for the 100000 invocations, "loop" is
"total / 100000 * 1000"):
cmpxchg | slowpath used || cmpxchg used
| total | loop || total | loop
--------|-----------|-------||------------|-------
ARMv6 | 9129.4 us | 91 ns || 3311.9 us | 33 ns
generic | 9360.2 us | 94 ns || 10834.6 us | 108 ns
----------------------------||--------------------
Forcing it to generic cmpxchg() made things worse for the slowpath and
even worse in cmpxchg() path. It boils down to 14ns more per lock+unlock
in a cache hot loop so it might not be that much in real world.
The last test was a substitute for pre ARMv6 machine but then I was able
to perform the comparison on imx28 which is ARMv5 and therefore is
always is using the generic cmpxchg implementation. And the numbers:
| total | loop
-------- |----------- |--------
slowpath | 263937.2 us | 2639 ns
cmpxchg | 16934.2 us | 169 ns
--------------------------------
The numbers are larger since the machine is slower in general. However,
letting rtmutex use cmpxchg() instead the slowpath seem to improve things.
Since from the ARM (tested on am335x + imx28) point of view always
using cmpxchg() in rt_mutex_lock() + rt_mutex_unlock() makes sense I
would drop the define.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: will.deacon@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20150225175613.GE6823@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To be consistent with the queued spinlocks which use
CONFIG_QUEUED_SPINLOCKS config parameter, the one for the queued
rwlocks is now renamed to CONFIG_QUEUED_RWLOCKS.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431367031-36697-1-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Valentin Rothberg reported that we use CONFIG_QUEUED_SPINLOCKS
in arch/x86/kernel/paravirt_patch_32.c, while the symbol is
called CONFIG_QUEUED_SPINLOCK. (Note the extra 'S')
But the typo was natural: the proper English term for such
a generic object would be 'queued spinlocks' - so rename
this and related symbols accordingly to the plural form.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The xchg() function was used in pv_wait_node() to set a certain
value and provide a memory barrier which is what the set_mb()
function is for. This patch replaces the xchg() call by
set_mb().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide a separate (second) version of the spin_lock_slowpath for
paravirt along with a special unlock path.
The second slowpath is generated by adding a few pv hooks to the
normal slowpath, but where those will compile away for the native
case, they expand into special wait/wake code for the pv version.
The actual MCS queue can use extra storage in the mcs_nodes[] array to
keep track of state and therefore uses directed wakeups.
The head contender has no such storage directly visible to the
unlocker. So the unlocker searches a hash table with open addressing
using a simple binary Galois linear feedback shift register.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1429901803-29771-9-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we detect a hypervisor (!paravirt, see qspinlock paravirt support
patches), revert to a simple test-and-set lock to avoid the horrors
of queue preemption.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-8-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, atomic_cmpxchg() is used to get the lock. However, this
is not really necessary if there is more than one task in the queue
and the queue head don't need to reset the tail code. For that case,
a simple write to set the lock bit is enough as the queue head will
be the only one eligible to get the lock as long as it checks that
both the lock and pending bits are not set. The current pending bit
waiting code will ensure that the bit will not be set as soon as the
tail code in the lock is set.
With that change, the are some slight improvement in the performance
of the queued spinlock in the 5M loop micro-benchmark run on a 4-socket
Westere-EX machine as shown in the tables below.
[Standalone/Embedded - same node]
# of tasks Before patch After patch %Change
---------- ----------- ---------- -------
3 2324/2321 2248/2265 -3%/-2%
4 2890/2896 2819/2831 -2%/-2%
5 3611/3595 3522/3512 -2%/-2%
6 4281/4276 4173/4160 -3%/-3%
7 5018/5001 4875/4861 -3%/-3%
8 5759/5750 5563/5568 -3%/-3%
[Standalone/Embedded - different nodes]
# of tasks Before patch After patch %Change
---------- ----------- ---------- -------
3 12242/12237 12087/12093 -1%/-1%
4 10688/10696 10507/10521 -2%/-2%
It was also found that this change produced a much bigger performance
improvement in the newer IvyBridge-EX chip and was essentially to close
the performance gap between the ticket spinlock and queued spinlock.
The disk workload of the AIM7 benchmark was run on a 4-socket
Westmere-EX machine with both ext4 and xfs RAM disks at 3000 users
on a 3.14 based kernel. The results of the test runs were:
AIM7 XFS Disk Test
kernel JPM Real Time Sys Time Usr Time
----- --- --------- -------- --------
ticketlock 5678233 3.17 96.61 5.81
qspinlock 5750799 3.13 94.83 5.97
AIM7 EXT4 Disk Test
kernel JPM Real Time Sys Time Usr Time
----- --- --------- -------- --------
ticketlock 1114551 16.15 509.72 7.11
qspinlock 2184466 8.24 232.99 6.01
The ext4 filesystem run had a much higher spinlock contention than
the xfs filesystem run.
The "ebizzy -m" test was also run with the following results:
kernel records/s Real Time Sys Time Usr Time
----- --------- --------- -------- --------
ticketlock 2075 10.00 216.35 3.49
qspinlock 3023 10.00 198.20 4.80
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-7-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we allow for a max NR_CPUS < 2^14 we can optimize the pending
wait-acquire and the xchg_tail() operations.
By growing the pending bit to a byte, we reduce the tail to 16bit.
This means we can use xchg16 for the tail part and do away with all
the repeated compxchg() operations.
This in turn allows us to unconditionally acquire; the locked state
as observed by the wait loops cannot change. And because both locked
and pending are now a full byte we can use simple stores for the
state transition, obviating one atomic operation entirely.
This optimization is needed to make the qspinlock achieve performance
parity with ticket spinlock at light load.
All this is horribly broken on Alpha pre EV56 (and any other arch that
cannot do single-copy atomic byte stores).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-6-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparatory patch that extracts out the following 2 code
snippets to prepare for the next performance optimization patch.
1) the logic for the exchange of new and previous tail code words
into a new xchg_tail() function.
2) the logic for clearing the pending bit and setting the locked bit
into a new clear_pending_set_locked() function.
This patch also simplifies the trylock operation before queuing by
calling queued_spin_trylock() directly.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-5-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because the qspinlock needs to touch a second cacheline (the per-cpu
mcs_nodes[]); add a pending bit and allow a single in-word spinner
before we punt to the second cacheline.
It is possible so observe the pending bit without the locked bit when
the last owner has just released but the pending owner has not yet
taken ownership.
In this case we would normally queue -- because the pending bit is
already taken. However, in this case the pending bit is guaranteed
to be released 'soon', therefore wait for it and avoid queueing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-4-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch introduces a new generic queued spinlock implementation that
can serve as an alternative to the default ticket spinlock. Compared
with the ticket spinlock, this queued spinlock should be almost as fair
as the ticket spinlock. It has about the same speed in single-thread
and it can be much faster in high contention situations especially when
the spinlock is embedded within the data structure to be protected.
Only in light to moderate contention where the average queue depth
is around 1-3 will this queued spinlock be potentially a bit slower
due to the higher slowpath overhead.
This queued spinlock is especially suit to NUMA machines with a large
number of cores as the chance of spinlock contention is much higher
in those machines. The cost of contention is also higher because of
slower inter-node memory traffic.
Due to the fact that spinlocks are acquired with preemption disabled,
the process will not be migrated to another CPU while it is trying
to get a spinlock. Ignoring interrupt handling, a CPU can only be
contending in one spinlock at any one time. Counting soft IRQ, hard
IRQ and NMI, a CPU can only have a maximum of 4 concurrent lock waiting
activities. By allocating a set of per-cpu queue nodes and used them
to form a waiting queue, we can encode the queue node address into a
much smaller 24-bit size (including CPU number and queue node index)
leaving one byte for the lock.
Please note that the queue node is only needed when waiting for the
lock. Once the lock is acquired, the queue node can be released to
be used later.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <paolo.bonzini@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1429901803-29771-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In up_write()/up_read(), rwsem_wake() will be called whenever it
detects that some writers/readers are waiting. The rwsem_wake()
function will take the wait_lock and call __rwsem_do_wake() to do the
real wakeup. For a heavily contended rwsem, doing a spin_lock() on
wait_lock will cause further contention on the heavily contended rwsem
cacheline resulting in delay in the completion of the up_read/up_write
operations.
This patch makes the wait_lock taking and the call to __rwsem_do_wake()
optional if at least one spinning writer is present. The spinning
writer will be able to take the rwsem and call rwsem_wake() later
when it calls up_write(). With the presence of a spinning writer,
rwsem_wake() will now try to acquire the lock using trylock. If that
fails, it will just quit.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Jason Low <jason.low2@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1430428337-16802-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ronny reported that the following scenario is not handled correctly:
T1 (prio = 10)
lock(rtmutex);
T2 (prio = 20)
lock(rtmutex)
boost T1
T1 (prio = 20)
sys_set_scheduler(prio = 30)
T1 prio = 30
....
sys_set_scheduler(prio = 10)
T1 prio = 30
The last step is wrong as T1 should now be back at prio 20.
Commit c365c292d0 ("sched: Consider pi boosting in setscheduler()")
only handles the case where a boosted tasks tries to lower its
priority.
Fix it by taking the new effective priority into account for the
decision whether a change of the priority is required.
Reported-by: Ronny Meeus <ronny.meeus@gmail.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Fixes: c365c292d0 ("sched: Consider pi boosting in setscheduler()")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505051806060.4225@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The check for hrtimer_active() after starting the timer is
pointless. If the timer is inactive it has expired already and
therefor the task pointer is already NULL.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.081830481@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
During sysrq's show-held-locks command it is possible that
hlock_class() returns NULL for a given lock. The result is then (after
the warning):
|BUG: unable to handle kernel NULL pointer dereference at 0000001c
|IP: [<c1088145>] get_usage_chars+0x5/0x100
|Call Trace:
| [<c1088263>] print_lock_name+0x23/0x60
| [<c1576b57>] print_lock+0x5d/0x7e
| [<c1088314>] lockdep_print_held_locks+0x74/0xe0
| [<c1088652>] debug_show_all_locks+0x132/0x1b0
| [<c1315c48>] sysrq_handle_showlocks+0x8/0x10
This *might* happen because the thread on the other CPU drops the lock
after we are looking ->lockdep_depth and ->held_locks points no longer
to a lock that is held.
The fix here is to simply ignore it and continue.
Reported-by: Andreas Messerschmid <andreas@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull core locking changes from Ingo Molnar:
"Main changes:
- jump label asm preparatory work for PowerPC (Anton Blanchard)
- rwsem optimizations and cleanups (Davidlohr Bueso)
- mutex optimizations and cleanups (Jason Low)
- futex fix (Oleg Nesterov)
- remove broken atomicity checks from {READ,WRITE}_ONCE() (Peter
Zijlstra)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc, jump_label: Include linux/jump_label.h to get HAVE_JUMP_LABEL define
jump_label: Allow jump labels to be used in assembly
jump_label: Allow asm/jump_label.h to be included in assembly
locking/mutex: Further simplify mutex_spin_on_owner()
locking: Remove atomicy checks from {READ,WRITE}_ONCE
locking/rtmutex: Rename argument in the rt_mutex_adjust_prio_chain() documentation as well
locking/rwsem: Fix lock optimistic spinning when owner is not running
locking: Remove ACCESS_ONCE() usage
locking/rwsem: Check for active lock before bailing on spinning
locking/rwsem: Avoid deceiving lock spinners
locking/rwsem: Set lock ownership ASAP
locking/rwsem: Document barrier need when waking tasks
locking/futex: Check PF_KTHREAD rather than !p->mm to filter out kthreads
locking/mutex: Refactor mutex_spin_on_owner()
locking/mutex: In mutex_spin_on_owner(), return true when owner changes
Similar to what Linus suggested for rwsem_spin_on_owner(), in
mutex_spin_on_owner() instead of having while (true) and
breaking out of the spin loop on lock->owner != owner, we can
have the loop directly check for while (lock->owner == owner) to
improve the readability of the code.
It also shrinks the code a bit:
text data bss dec hex filename
3721 0 0 3721 e89 mutex.o.before
3705 0 0 3705 e79 mutex.o.after
Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1428521960-5268-2-git-send-email-jason.low2@hp.com
[ Added code generation info. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Module unload calls lockdep_free_key_range(), which removes entries
from the data structures. Most of the lockdep code OTOH assumes the
data structures are append only; in specific see the comments in
add_lock_to_list() and look_up_lock_class().
Clearly this has only worked by accident; make it work proper. The
actual scenario to make it go boom would involve the memory freed by
the module unlock being re-allocated and re-used for a lock inside of
a rcu-sched grace period. This is a very unlikely scenario, still
better plug the hole.
Use RCU list iteration in all places and ammend the comments.
Change lockdep_free_key_range() to issue a sync_sched() between
removal from the lists and returning -- which results in the memory
being freed. Further ensure the callers are placed correctly and
comment the requirements.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Tsyvarev <tsyvarev@ispras.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ming reported soft lockups occurring when running xfstest due to
the following tip:locking/core commit:
b3fd4f03ca ("locking/rwsem: Avoid deceiving lock spinners")
When doing optimistic spinning in rwsem, threads should stop
spinning when the lock owner is not running. While a thread is
spinning on owner, if the owner reschedules, owner->on_cpu
returns false and we stop spinning.
However, this commit essentially caused the check to get
ignored because when we break out of the spin loop due to
!on_cpu, we continue spinning if sem->owner != NULL.
This patch fixes this by making sure we stop spinning if the
owner is not running. Furthermore, just like with mutexes,
refactor the code such that we don't have separate checks for
owner_running(). This makes it more straightforward in terms of
why we exit the spin on owner loop and we would also avoid
needing to "guess" why we broke out of the loop to make this
more readable.
Reported-and-tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1425714331.2475.388.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "usual" path is:
- rt_mutex_slowlock()
- set_current_state()
- task_blocks_on_rt_mutex() (ret 0)
- __rt_mutex_slowlock()
- sleep or not but do return with __set_current_state(TASK_RUNNING)
- back to caller.
In the early error case where task_blocks_on_rt_mutex() return
-EDEADLK we never change the task's state back to RUNNING. I
assume this is intended. Without this change after ww_mutex
using rt_mutex the selftest passes but later I get plenty of:
| bad: scheduling from the idle thread!
backtraces.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: afffc6c180 ("locking/rtmutex: Optimize setting task running after being blocked")
Link: http://lkml.kernel.org/r/1425056229-22326-4-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With the new standardized functions, we can replace all
ACCESS_ONCE() calls across relevant locking - this includes
lockref and seqlock while at it.
ACCESS_ONCE() does not work reliably on non-scalar types.
For example gcc 4.6 and 4.7 might remove the volatile tag
for such accesses during the SRA (scalar replacement of
aggregates) step:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145
Update the new calls regardless of if it is a scalar type,
this is cleaner than having three alternatives.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1424662301.6539.18.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU6pFJAAoJEHm+PkMAQRiG2OwH/24nDK+l9zkaRs0xJsVh+qiW
8A2N1od0ickz43iMk48jfeWGkFOkd4izyvan/daJshJOE1Y5lCdSs7jq/OXVOv9L
G0+KQUoC5NL0hqYKn1XJPFluNQ1yqMvrDwQt99grDGzruNGBbwHuBhAQmgzpj1nU
do8KrGjr7ft1Rzm4mOAdET/ExWiF+mRSJSxxOv598HbsIRdM5wgn0hHjPlqDxmLN
KH4r3YYEm0cHyjf4Krse0+YdhqdamRGJlmYxJgEsYNwCoMwkmHlLTc71diseUhrg
r/VYIYQvpAA6Yvgw8rJ0N5gk/sJJig+WyyPhfQuc2bD5sbL9eO7mPnz2UP7z7ss=
=vXB6
-----END PGP SIGNATURE-----
Merge tag 'v4.0-rc1' into locking/core, to refresh the tree before merging new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull locking fixes from Ingo Molnar:
"Two fixes: the paravirt spin_unlock() corruption/crash fix, and an
rtmutex NULL dereference crash fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/spinlocks/paravirt: Fix memory corruption on unlock
locking/rtmutex: Avoid a NULL pointer dereference on deadlock
37e9562453 ("locking/rwsem: Allow conservative optimistic
spinning when readers have lock") forced the default for
optimistic spinning to be disabled if the lock owner was
nil, which makes much sense for readers. However, while
it is not our priority, we can make some optimizations
for write-mostly workloads. We can bail the spinning step
and still be conservative if there are any active tasks,
otherwise there's really no reason not to spin, as the
semaphore is most likely unlocked.
This patch recovers most of a Unixbench 'execl' benchmark
throughput by sleeping less and making better average system
usage:
before:
CPU %user %nice %system %iowait %steal %idle
all 0.60 0.00 8.02 0.00 0.00 91.38
after:
CPU %user %nice %system %iowait %steal %idle
all 1.22 0.00 70.18 0.00 0.00 28.60
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1422609267-15102-6-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When readers hold the semaphore, the ->owner is nil. As such,
and unlike mutexes, '!owner' does not necessarily imply that
the lock is free. This will cause writers to potentially spin
excessively as they've been mislead to thinking they have a
chance of acquiring the lock, instead of blocking.
This patch therefore enhances the counter check when the owner
is not set by the time we've broken out of the loop. Otherwise
we can return true as a new owner has the lock and thus we want
to continue spinning. While at it, we can make rwsem_spin_on_owner()
less ambiguos and return right away under need_resched conditions.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1422609267-15102-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to optimize the spinning step, we need to set the lock
owner as soon as the lock is acquired; after a successful counter
cmpxchg operation, that is. This is particularly useful as rwsems
need to set the owner to nil for readers, so there is a greater
chance of falling out of the spinning. Currently we only set the
owner much later in the game, in the more generic level -- latency
can be specially bad when waiting for a node->next pointer when
releasing the osq in up_write calls.
As such, update the owner inside rwsem_try_write_lock (when the
lock is obtained after blocking) and rwsem_try_write_lock_unqueued
(when the lock is obtained while spinning). This requires creating
a new internal rwsem.h header to share the owner related calls.
Also cleanup some headers for mutex and rwsem.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1422609267-15102-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The need for the smp_mb() in __rwsem_do_wake() should be
properly documented. Applies to both xadd and spinlock
variants.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1422609267-15102-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As suggested by Davidlohr, we could refactor mutex_spin_on_owner().
Currently, we split up owner_running() with mutex_spin_on_owner().
When the owner changes, we make duplicate owner checks which are not
necessary. It also makes the code a bit obscure as we are using a
second check to figure out why we broke out of the loop.
This patch modifies it such that we remove the owner_running() function
and the mutex_spin_on_owner() loop directly checks for if the owner changes,
if the owner is not running, or if we need to reschedule. If the owner
changes, we break out of the loop and return true. If the owner is not
running or if we need to reschedule, then break out of the loop and return
false.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: chegu_vinod@hp.com
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/r/1422914367-5574-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the mutex_spin_on_owner(), we return true only if lock->owner == NULL.
This was beneficial in situations where there were multiple threads
simultaneously spinning for the mutex. If another thread got the lock
while other spinner(s) were also doing mutex_spin_on_owner(), then the
other spinners would stop spinning. This workaround helped reduce the
chance that many spinners were simultaneously spinning for the mutex
which can help reduce contention in highly contended cases.
However, recent changes were made to the optimistic spinning code such
that instead of having all spinners simultaneously spin for the mutex,
we queue the spinners with an MCS lock such that only one thread spins
for the mutex at a time. Furthermore, the OSQ optimizations ensure that
spinners in the queue will stop waiting if it needs to reschedule.
Now, we don't have to worry about multiple threads spinning on owner
at the same time, and if lock->owner is not NULL at this point, it likely
means another thread happens to obtain the lock in the fastpath. In this
case, it would make sense for the spinner to continue spinning as long
as the spinner doesn't need to schedule and the mutex owner is running.
This patch changes this so that mutex_spin_on_owner() returns true when
the lock owner changes, which means a thread will only stop spinning
if it either needs to reschedule or if the lock owner is not running.
We saw up to a 5% performance improvement in the fserver workload with
this patch.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: chegu_vinod@hp.com
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/r/1422914367-5574-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With task_blocks_on_rt_mutex() returning early -EDEADLK we never
add the waiter to the waitqueue. Later, we try to remove it via
remove_waiter() and go boom in rt_mutex_top_waiter() because
rb_entry() gives a NULL pointer.
( Tested on v3.18-RT where rtmutex is used for regular mutex and I
tried to get one twice in a row. )
Not sure when this started but I guess 397335f004 ("rtmutex: Fix
deadlock detector for real") or commit 3d5c9340d1 ("rtmutex:
Handle deadlock detection smarter").
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org> # for v3.16 and later kernels
Link: http://lkml.kernel.org/r/1424187823-19600-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull s390 updates from Martin Schwidefsky:
- The remaining patches for the z13 machine support: kernel build
option for z13, the cache synonym avoidance, SMT support,
compare-and-delay for spinloops and the CES5S crypto adapater.
- The ftrace support for function tracing with the gcc hotpatch option.
This touches common code Makefiles, Steven is ok with the changes.
- The hypfs file system gets an extension to access diagnose 0x0c data
in user space for performance analysis for Linux running under z/VM.
- The iucv hvc console gets wildcard spport for the user id filtering.
- The cacheinfo code is converted to use the generic infrastructure.
- Cleanup and bug fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
s390/process: free vx save area when releasing tasks
s390/hypfs: Eliminate hypfs interval
s390/hypfs: Add diagnose 0c support
s390/cacheinfo: don't use smp_processor_id() in preemptible context
s390/zcrypt: fixed domain scanning problem (again)
s390/smp: increase maximum value of NR_CPUS to 512
s390/jump label: use different nop instruction
s390/jump label: add sanity checks
s390/mm: correct missing space when reporting user process faults
s390/dasd: cleanup profiling
s390/dasd: add locking for global_profile access
s390/ftrace: hotpatch support for function tracing
ftrace: let notrace function attribute disable hotpatching if necessary
ftrace: allow architectures to specify ftrace compile options
s390: reintroduce diag 44 calls for cpu_relax()
s390/zcrypt: Add support for new crypto express (CEX5S) adapter.
s390/zcrypt: Number of supported ap domains is not retrievable.
s390/spinlock: add compare-and-delay to lock wait loops
s390/tape: remove redundant if statement
s390/hvc_iucv: add simple wildcard matches to the iucv allow filter
...
Pull networking updates from David Miller:
1) More iov_iter conversion work from Al Viro.
[ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
wrong, and this pull actually adds an extra commit on top of the
branch I'm pulling to fix that up, so that the pre-merge state is
ok. - Linus ]
2) Various optimizations to the ipv4 forwarding information base trie
lookup implementation. From Alexander Duyck.
3) Remove sock_iocb altogether, from CHristoph Hellwig.
4) Allow congestion control algorithm selection via routing metrics.
From Daniel Borkmann.
5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.
6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.
7) Add xmit_more support to r8169, e1000, and e1000e drivers. From
Florian Westphal.
8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.
9) Add BPF packet actions to packet scheduler, from Jiri Pirko.
10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.
11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
Kwok.
12) More sanely handle out-of-window dupacks, which can result in
serious ACK storms. From Neal Cardwell.
13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
Patrick McHardy, and Thomas Graf.
14) Support xmit_more in be2net, from Sathya Perla.
15) Group Policy extensions for vxlan, from Thomas Graf.
16) Remove Checksum Offload support for vxlan, from Tom Herbert.
17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From
Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
crypto: fix af_alg_make_sg() conversion to iov_iter
ipv4: Namespecify TCP PMTU mechanism
i40e: Fix for stats init function call in Rx setup
tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
ipv6: Make __ipv6_select_ident static
ipv6: Fix fragment id assignment on LE arches.
bridge: Fix inability to add non-vlan fdb entry
net: Mellanox: Delete unnecessary checks before the function call "vunmap"
cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
net: dsa: Remove redundant phy_attach()
IB/mlx4: Reset flow support for IB kernel ULPs
IB/mlx4: Always use the correct port for mirrored multicast attachments
net/bonding: Fix potential bad memory access during bonding events
tipc: remove tipc_snprintf
tipc: nl compat add noop and remove legacy nl framework
tipc: convert legacy nl stats show to nl compat
tipc: convert legacy nl net id get to nl compat
tipc: convert legacy nl net id set to nl compat
...
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- various sched/deadline fixes and enhancements
- rescheduling latency fixes/cleanups
- rework the rq->clock code to be more consistent and more robust.
- minor micro-optimizations
- ->avg.decay_count fixes
- add a stack overflow check to might_sleep()
- idle-poll handler fix, possibly resulting in power savings
- misc smaller updates and fixes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/Documentation: Remove unneeded word
sched/wait: Introduce wait_on_bit_timeout()
sched: Pull resched loop to __schedule() callers
sched/deadline: Remove cpu_active_mask from cpudl_find()
sched: Fix hrtick_start() on UP
sched/deadline: Avoid pointless __setscheduler()
sched/deadline: Fix stale yield state
sched/deadline: Fix hrtick for a non-leftmost task
sched/deadline: Modify cpudl::free_cpus to reflect rd->online
sched/idle: Add missing checks to the exit condition of cpu_idle_poll()
sched: Fix missing preemption opportunity
sched/rt: Reduce rq lock contention by eliminating locking of non-feasible target
sched/debug: Print rq->clock_task
sched/core: Rework rq->clock update skips
sched/core: Validate rq_clock*() serialization
sched/core: Remove check of p->sched_class
sched/fair: Fix sched_entity::avg::decay_count initialization
sched/debug: Fix potential call to __ffs(0) in sched_show_task()
sched/debug: Check for stack overflow in ___might_sleep()
sched/fair: Fix the dealing with decay_count in __synchronize_entity_decay()
We explicitly mark the task running after returning from
a __rt_mutex_slowlock() call, which does the actual sleeping
via wait-wake-trylocking. As such, this patch does two things:
(1) refactors the code so that setting current to TASK_RUNNING
is done by __rt_mutex_slowlock(), and not by the callers. The
downside to this is that it becomes a bit unclear when at what
point we block. As such I've added a comment that the task
blocks when calling __rt_mutex_slowlock() so readers can figure
out when it is running again.
(2) relaxes setting current's state through __set_current_state(),
instead of it's more expensive barrier alternative. There was no
need for the implied barrier as we're obviously not planning on
blocking.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422857784.18096.1.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call __set_task_state() instead of assigning the new state
directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP
environments, keeping track of who last changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422257769-14083-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By the time we wake up and get the lock after being asleep
in the slowpath, we better be running. As good practice,
be explicit about this and avoid any mischief.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1421717961.4903.11.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The second 'mutex' shouldn't be there, it can't be about the mutex,
as the mutex can't be freed, but unlocked, the memory where the
mutex resides however, can be freed.
Signed-off-by: Sharon Dvir <sharon.dvir1@mail.huji.ac.il>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422827252-31363-1-git-send-email-sharon.dvir1@mail.huji.ac.il
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Conflicts:
drivers/net/xen-netfront.c
Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.
Signed-off-by: David S. Miller <davem@davemloft.net>
Both mutexes and rwsems took a performance hit when we switched
over from the original mcs code to the cancelable variant (osq).
The reason being the use of smp_load_acquire() when polling for
node->locked. This is not needed as reordering is not an issue,
as such, relax the barrier semantics. Paul describes the scenario
nicely: https://lkml.org/lkml/2013/11/19/405
- If we start polling before the insertion is complete, all that
happens is that the first few polls have no chance of seeing a lock
grant.
- Ordering the polling against the initialization -- the above
xchg() is already doing that for us.
The smp_load_acquire() when unqueuing make sense. In addition,
we don't need to worry about leaking the critical region as
osq is only used internally.
This impacts both regular and large levels of concurrency,
ie on a 40 core system with a disk intensive workload:
disk-1 804.83 ( 0.00%) 828.16 ( 2.90%)
disk-61 8063.45 ( 0.00%) 18181.82 (125.48%)
disk-121 7187.41 ( 0.00%) 20119.17 (179.92%)
disk-181 6933.32 ( 0.00%) 20509.91 (195.82%)
disk-241 6850.81 ( 0.00%) 20397.80 (197.74%)
disk-301 6815.22 ( 0.00%) 20287.58 (197.68%)
disk-361 7080.40 ( 0.00%) 20205.22 (185.37%)
disk-421 7076.13 ( 0.00%) 19957.33 (182.04%)
disk-481 7083.25 ( 0.00%) 19784.06 (179.31%)
disk-541 7038.39 ( 0.00%) 19610.92 (178.63%)
disk-601 7072.04 ( 0.00%) 19464.53 (175.23%)
disk-661 7010.97 ( 0.00%) 19348.23 (175.97%)
disk-721 7069.44 ( 0.00%) 19255.33 (172.37%)
disk-781 7007.58 ( 0.00%) 19103.14 (172.61%)
disk-841 6981.18 ( 0.00%) 18964.22 (171.65%)
disk-901 6968.47 ( 0.00%) 18826.72 (170.17%)
disk-961 6964.61 ( 0.00%) 18708.02 (168.62%)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-7-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have two flavors of the MCS spinlock: standard and cancelable (OSQ).
While each one is independent of the other, we currently mix and match
them. This patch:
- Moves the OSQ code out of mcs_spinlock.h (which only deals with the traditional
version) into include/linux/osq_lock.h. No unnecessary code is added to the
more global header file, anything locks that make use of OSQ must include
it anyway.
- Renames mcs_spinlock.c to osq_lock.c. This file only contains osq code.
- Introduces a CONFIG_LOCK_SPIN_ON_OWNER in order to only build osq_lock
if there is support for it.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1420573509-24774-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... which is equivalent to the fastpath counter part.
This mainly allows getting some WW specific code out
of generic mutex paths.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It serves much better if the comments are right before the osq_lock() call.
Also delete a useless comment.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mark it so by renaming __mutex_lock_check_stamp().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420573509-24774-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only
cleared iff debug_locks is active. This exposes a race to other users of
the field where the mutex->owner may be still set to a stale value,
potentially upsetting mutex_spin_on_owner() among others.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We're going to make might_sleep() test for TASK_RUNNING, because
blocking without TASK_RUNNING will destroy the task state by setting
it to TASK_RUNNING.
There are a few occasions where its 'valid' to call blocking
primitives (and mutex_lock in particular) and not have TASK_RUNNING,
typically such cases are right before we set TASK_RUNNING anyhow.
Robustify the code by not assuming this; this has the beneficial side
effect of allowing optional code emission for fixing the above
might_sleep() false positives.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: tglx@linutronix.de
Cc: ilya.dryomov@inktank.com
Cc: umgwanakikbuti@gmail.com
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140924082241.988560063@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull core locking updates from Ingo Molnar:
"The main updates in this cycle were:
- mutex MCS refactoring finishing touches: improve comments, refactor
and clean up code, reduce debug data structure footprint, etc.
- qrwlock finishing touches: remove old code, self-test updates.
- small rwsem optimization
- various smaller fixes/cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Revert qrwlock recusive stuff
locking/rwsem: Avoid double checking before try acquiring write lock
locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition
locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S
locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code
locking/semaphore: Resolve some shadow warnings
locking/selftest: Support queued rwlock
locking/lockdep: Restrict the use of recursive read_lock() with qrwlock
locking/spinlocks: Always evaluate the second argument of spin_lock_nested()
locking/Documentation: Update locking/mutex-design.txt disadvantages
locking/Documentation: Move locking related docs into Documentation/locking/
locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate
locking/mutexes: Refactor optimistic spinning code
locking/mcs: Remove obsolete comment
locking/mutexes: Document quick lock release when unlocking
locking/mutexes: Standardize arguments in lock/unlock slowpaths
locking: Remove deprecated smp_mb__() barriers
Commit f0bab73cb5 ("locking/lockdep: Restrict the use of recursive
read_lock() with qrwlock") changed lockdep to try and conform to the
qrwlock semantics which differ from the traditional rwlock semantics.
In particular qrwlock is fair outside of interrupt context, but in
interrupt context readers will ignore all fairness.
The problem modeling this is that read and write side have different
lock state (interrupts) semantics but we only have a single
representation of these. Therefore lockdep will get confused, thinking
the lock can cause interrupt lock inversions.
So revert it for now; the old rwlock semantics were already imperfectly
modeled and the qrwlock extra won't fit either.
If we want to properly fix this, I think we need to resurrect the work
by Gautham did a few years ago that split the read and write state of
locks:
http://lwn.net/Articles/332801/
FWIW the locking selftest that would've failed (and was reported by
Borislav earlier) is something like:
RL(X1); /* IRQ-ON */
LOCK(A);
UNLOCK(A);
RU(X1);
IRQ_ENTER();
RL(X1); /* IN-IRQ */
RU(X1);
IRQ_EXIT();
At which point it would report that because A is an IRQ-unsafe lock we
can suffer the following inversion:
CPU0 CPU1
lock(A)
lock(X1)
lock(A)
<IRQ>
lock(X1)
And this is 'wrong' because X1 can recurse (assuming the above lock are
in fact read-lock) but lockdep doesn't know about this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: ego@linux.vnet.ibm.com
Cc: bp@alien8.de
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140930132600.GA7444@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 9b0fc9c09f ("rwsem: skip initial trylock in rwsem_down_write_failed")
checks for if there are known active lockers in order to avoid write trylocking
using expensive cmpxchg() when it likely wouldn't get the lock.
However, a subsequent patch was added such that we directly
check for sem->count == RWSEM_WAITING_BIAS right before trying
that cmpxchg().
Thus, commit 9b0fc9c09f now just adds overhead.
This patch modifies it so that we only do a check for if
count == RWSEM_WAITING_BIAS.
Also, add a comment on why we do an "extra check" of count
before the cmpxchg().
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1410913017.2447.22.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove some unnecessary ones and explicitly include rwsem.h
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Its quite easy to get mixed up with the names -- 'torture_spinlock_irq'
is not actually a valid spinlock name.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add a "rw_lock" torture test to stress kernel rwlocks and their irq
variant. Reader critical regions are 5x longer than writers. As such
a similar ratio of lock acquisitions is seen in the statistics. In the
case of massive contention, both hold the lock for 1/10 of a second.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The amount of global variables is getting pretty ugly. Group variables
related to the execution (ie: not parameters) in a new context structure.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
We can easily do so with our new reader lock support. Just an arbitrary
design default: readers have higher (5x) critical region latencies than
writers: 50 ms and 10 ms, respectively.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Most of it is based on what we already have for writers. This allows
readers to be very independent (and thus configurable), enabling
future module parameters to control things such as rw distribution.
Furthermore, readers have their own delaying function, allowing us
to test different rw critical region latencies, and stress locking
internals. Similarly, statistics, for now will only serve for the
number of lock acquisitions -- as opposed to writers, readers have
no failure detection.
In addition, introduce a new nreaders_stress module parameter. The
default number of readers will be the same number of writers threads.
Writer threads are interleaved with readers. Documentation is updated,
respectively.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When performing module cleanups by calling torture_cleanup() the
'torture_type' string in nullified However, callers are not necessarily
done, and might still need to reference the variable. This impacts
both rcutorture and locktorture, causing printing things like:
[ 94.226618] (null)-torture: Stopping lock_torture_writer task
[ 94.226624] (null)-torture: Stopping lock_torture_stats task
Thus delay this operation until the very end of the cleanup process.
The consequence (which shouldn't matter for this kid of program) is,
of course, that we delay the window between rmmod and modprobing,
for instance in module_torture_begin().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The statistics structure can serve well for both reader and writer
locks, thus simply rename some fields that mention 'write' and leave
the declaration of lwsa.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Regular locks are very different than locks with debugging. For instance
for mutexes, debugging forces to only take the slowpaths. As such, the
locktorture module should take this into account when printing related
information -- specifically when printing user passed parameters, it seems
the right place for such info.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add a "mutex_lock" torture test. The main difference with the already
existing spinlock tests is that the latency of the critical region
is much larger. We randomly delay for (arbitrarily) either 500 ms or,
otherwise, 25 ms. While this can considerably reduce the amount of
writes compared to non blocking locks, if run long enough it can have
the same torturous effect. Furthermore it is more representative of
mutex hold times and can stress better things like thrashing.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
... to just 'torture_runnable'. It follows other variable naming
and is shorter.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Resolve some shadow warnings resulting from using the name
jiffies, which is a well-known global. This is not a problem
of course, but it could be a trap for someone copying and
pasting code, and it just makes W=2 a little cleaner.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1409739444-13635-1-git-send-email-jeffrey.t.kirsher@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Unlike the original unfair rwlock implementation, queued rwlock
will grant lock according to the chronological sequence of the lock
requests except when the lock requester is in the interrupt context.
Consequently, recursive read_lock calls will now hang the process if
there is a write_lock call somewhere in between the read_lock calls.
This patch updates the lockdep implementation to look for recursive
read_lock calls. A new read state (3) is used to mark those read_lock
call that cannot be recursively called except in the interrupt
context. The new read state does exhaust the 2 bits available in
held_lock:read bit field. The addition of any new read state in the
future may require a redesign of how all those bits are squeezed
together in the held_lock structure.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1407345722-61615-2-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
4badad35 ("locking/mutex: Disable optimistic spinning on some
architectures") added a ARCH_SUPPORTS_ATOMIC_RMW flag to
disable the mutex optimistic feature on specific archs.
Because CONFIG_MUTEX_SPIN_ON_OWNER only depended on DEBUG and
SMP, it was ok to have the ->owner field conditional a bit
flexible. However by adding a new variable to the matter,
we can waste space with the unused field, ie: CONFIG_SMP &&
(!CONFIG_MUTEX_SPIN_ON_OWNER && !CONFIG_DEBUG_MUTEX).
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: aswin@hp.com
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1406752916-3341-5-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When we fail to acquire the mutex in the fastpath, we end up calling
__mutex_lock_common(). A *lot* goes on in this function. Move out the
optimistic spinning code into mutex_optimistic_spin() and simplify
the former a bit. Furthermore, this is similar to what we have in
rwsems. No logical changes.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: aswin@hp.com
Cc: mingo@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406752916-3341-4-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When unlocking, we always want to reach the slowpath with the lock's counter
indicating it is unlocked. -- as returned by the asm fastpath call or by
explicitly setting it. While doing so, at least in theory, we can optimize
and allow faster lock stealing.
When unlocking, we always want to reach the slowpath with the lock's counter
indicating it is unlocked. -- as returned by the asm fastpath call or by
explicitly setting it. While doing so, at least in theory, we can optimize
and allow faster lock stealing.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1406752916-3341-2-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just how the locking-end behaves, when unlocking, go ahead and
obtain the proper data structure immediately after the previous
(asm-end) call exits and there are (probably) pending waiters.
This simplifies a bit some of the layering.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Cc: aswin@hp.com
Cc: mingo@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1406752916-3341-1-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.
This patch (i) renames the call to cpu_relax_lowlatency ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When lockdep turns itself off, the following message is logged:
Please attach the output of /proc/lock_stat to the bug report
Omit this message when CONFIG_LOCK_STAT is off, and /proc/lock_stat
doesn't exist.
Signed-off-by: Andreas Gruenbacher <andreas.gruenbacher@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405451452-3824-1-git-send-email-andreas.gruenbacher@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Just like with mutexes (CONFIG_MUTEX_SPIN_ON_OWNER),
encapsulate the dependencies for rwsem optimistic spinning.
No logical changes here as it continues to depend on both
SMP and the XADD algorithm variant.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Jason Low <jason.low2@hp.com>
[ Also make it depend on ARCH_SUPPORTS_ATOMIC_RMW. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1405112406-13052-2-git-send-email-davidlohr@hp.com
Cc: aswin@hp.com
Cc: Chris Mason <clm@fb.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two definitions of struct rw_semaphore, one in linux/rwsem.h
and one in linux/rwsem-spinlock.h.
For some reason they have different names for the initial field. This
makes it impossible to use C99 named initialization for
__RWSEM_INITIALIZER() -- or we have to duplicate that entire thing
along with the structure definitions.
The simpler patch is renaming the rwsem-spinlock variant to match the
regular rwsem.
This allows us to switch to C99 named initialization.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bmrZolsbGmautmzrerog27io@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the unlock function of the cancellable MCS spinlock, the first
thing we do is to retrive the current CPU's osq node. However, due to
the changes made in the previous patch, in the common case where the
lock is not contended, we wouldn't need to access the current CPU's
osq node anymore.
This patch optimizes this by only retriving this CPU's osq node
after we attempt the initial cmpxchg to unlock the osq and found
that its contended.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1405358872-3732-5-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, we initialize the osq lock by directly setting the lock's values. It
would be preferable if we use an init macro to do the initialization like we do
with other locks.
This patch introduces and uses a macro and function for initializing the osq lock.
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cancellable MCS spinlock is currently used to queue threads that are
doing optimistic spinning. It uses per-cpu nodes, where a thread obtaining
the lock would access and queue the local node corresponding to the CPU that
it's running on. Currently, the cancellable MCS lock is implemented by using
pointers to these nodes.
In this patch, instead of operating on pointers to the per-cpu nodes, we
store the CPU numbers in which the per-cpu nodes correspond to in atomic_t.
A similar concept is used with the qspinlock.
By operating on the CPU # of the nodes using atomic_t instead of pointers
to those nodes, this can reduce the overhead of the cancellable MCS spinlock
by 32 bits (on 64 bit systems).
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the per-cpu nodes structure for the cancellable MCS spinlock is
named "optimistic_spin_queue". However, in a follow up patch in the series
we will be introducing a new structure that serves as the new "handle" for
the lock. It would make more sense if that structure is named
"optimistic_spin_queue". Additionally, since the current use of the
"optimistic_spin_queue" structure are "nodes", it might be better if we
rename them to "node" anyway.
This preparatory patch renames all current "optimistic_spin_queue"
to "optimistic_spin_node".
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Mason <clm@fb.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1405358872-3732-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 4fc828e24c ("locking/rwsem: Support optimistic spinning")
introduced a major performance regression for workloads such as
xfs_repair which mix read and write locking of the mmap_sem across
many threads. The result was xfs_repair ran 5x slower on 3.16-rc2
than on 3.15 and using 20x more system CPU time.
Perf profiles indicate in some workloads that significant time can
be spent spinning on !owner. This is because we don't set the lock
owner when readers(s) obtain the rwsem.
In this patch, we'll modify rwsem_can_spin_on_owner() such that we'll
return false if there is no lock owner. The rationale is that if we
just entered the slowpath, yet there is no lock owner, then there is
a possibility that a reader has the lock. To be conservative, we'll
avoid spinning in these situations.
This patch reduced the total run time of the xfs_repair workload from
about 4 minutes 24 seconds down to approximately 1 minute 26 seconds,
back to close to the same performance as on 3.15.
Retesting of AIM7, which were some of the workloads used to test the
original optimistic spinning code, confirmed that we still get big
performance gains with optimistic spinning, even with this additional
regression fix. Davidlohr found that while the 'custom' workload took
a performance hit of ~-14% to throughput for >300 users with this
additional patch, the overall gain with optimistic spinning is
still ~+45%. The 'disk' workload even improved by ~+15% at >1000 users.
Tested-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1404532172.2572.30.camel@j-VirtualBox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The mutex_trylock() function calls into __mutex_trylock_fastpath() when
trying to obtain the mutex. On 32 bit x86, in the !__HAVE_ARCH_CMPXCHG
case, __mutex_trylock_fastpath() calls directly into __mutex_trylock_slowpath()
regardless of whether or not the mutex is locked.
In __mutex_trylock_slowpath(), we then acquire the wait_lock spinlock, xchg()
lock->count with -1, then set lock->count back to 0 if there are no waiters,
and return true if the prev lock count was 1.
However, if the mutex is already locked, then there isn't much point
in attempting all of the above expensive operations. In this patch, we only
attempt the above trylock operations if the mutex is unlocked.
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: Waiman.Long@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-5-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Upon entering the slowpath in __mutex_lock_common(), we try once more to
acquire the mutex. We only try to acquire if (lock->count >= 0). However,
what we actually want here is to try to acquire if the mutex is unlocked
(lock->count == 1).
This patch changes it so that we only try-acquire the mutex upon entering
the slowpath if it is unlocked, rather than if the lock count is non-negative.
This helps further reduce unnecessary atomic xchg() operations.
Furthermore, this patch uses !mutex_is_locked(lock) to do the initial
checks for if the lock is free rather than directly calling atomic_read()
on the lock->count, in order to improve readability.
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: davidlohr@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MUTEX_SHOW_NO_WAITER() is a macro which checks for if there are
"no waiters" on a mutex by checking if the lock count is non-negative.
Based on feedback from the discussion in the earlier version of this
patchset, the macro is not very readable.
Furthermore, checking lock->count isn't always the correct way to
determine if there are "no waiters" on a mutex. For example, a negative
count on a mutex really only means that there "potentially" are
waiters. Likewise, there can be waiters on the mutex even if the count is
non-negative. Thus, "MUTEX_SHOW_NO_WAITER" doesn't always do what the name
of the macro suggests.
So this patch deletes the MUTEX_SHOW_NO_WAITERS() macro, directly
use atomic_read() instead of the macro, and adds comments which
elaborate on how the extra atomic_read() checks can help reduce
unnecessary xchg() operations.
Signed-off-by: Jason Low <jason.low2@hp.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: tim.c.chen@linux.intel.com
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Cc: davidlohr@hp.com
Cc: scott.norton@hp.com
Cc: aswin@hp.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402511843-4721-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case the dead lock detector is enabled we follow the lock chain to
the end in rt_mutex_adjust_prio_chain, even if we could stop earlier
due to the priority/waiter constellation.
But once we are no longer the top priority waiter in a certain step
or the task holding the lock has already the same priority then there
is no point in dequeing and enqueing along the lock chain as there is
no change at all.
So stop the queueing at this point.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/20140522031950.280830190@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The conditions under which deadlock detection is conducted are unclear
and undocumented.
Add constants instead of using 0/1 and provide a selection function
which hides the additional debug dependency from the calling code.
Add comments where needed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/20140522031949.947264874@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The deadlock logic is only required for futexes.
Remove the extra arguments for the public functions and also for the
futex specific ones which get always called with deadlock detection
enabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Exit right away, when the removed waiter was not the top priority
waiter on the lock. Get rid of the extra indent level.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Add commentry to document the chain walk and the protection mechanisms
and their scope.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Add a separate local variable for the boost/deboost logic to make the
code more readable. Add comments where appropriate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
There is no point to keep the task ref across the check for lock
owner. Drop the ref before that, so the protection context is clear.
Found while documenting the chain walk.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
The current implementation of try_to_take_rtmutex() is correct, but
requires more than a single brain twist to understand the clever
encoded conditionals.
Untangle it and document the cases proper.
Looks less efficient at the first glance, but actually reduces the
binary code size on x8664 by 80 bytes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Oleg noticed that rtmutex_slowtrylock() has a pointless check for
rt_mutex_owner(lock) != current.
To avoid calling try_to_take_rtmutex() we really want to check whether
the lock has an owner at all or whether the trylock failed because the
owner is NULL, but the RT_MUTEX_HAS_WAITERS bit is set. This covers
the lock is owned by caller situation as well.
We can actually do this check lockless. trylock is taking a chance
whether we take lock->wait_lock to do the check or not.
Add comments to the function while at it.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Pull rtmutex fixes from Thomas Gleixner:
"Another three patches to make the rtmutex code more robust. That's
the last urgent fallout from the big futex/rtmutex investigation"
* 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Plug slow unlock race
rtmutex: Detect changes in the pi lock chain
rtmutex: Handle deadlock detection smarter
When the rtmutex fast path is enabled the slow unlock function can
create the following situation:
spin_lock(foo->m->wait_lock);
foo->m->owner = NULL;
rt_mutex_lock(foo->m); <-- fast path
free = atomic_dec_and_test(foo->refcnt);
rt_mutex_unlock(foo->m); <-- fast path
if (free)
kfree(foo);
spin_unlock(foo->m->wait_lock); <--- Use after free.
Plug the race by changing the slow unlock to the following scheme:
while (!rt_mutex_has_waiters(m)) {
/* Clear the waiters bit in m->owner */
clear_rt_mutex_waiters(m);
owner = rt_mutex_owner(m);
spin_unlock(m->wait_lock);
if (cmpxchg(m->owner, owner, 0) == owner)
return;
spin_lock(m->wait_lock);
}
So in case of a new waiter incoming while the owner tries the slow
path unlock we have two situations:
unlock(wait_lock);
lock(wait_lock);
cmpxchg(p, owner, 0) == owner
mark_rt_mutex_waiters(lock);
acquire(lock);
Or:
unlock(wait_lock);
lock(wait_lock);
mark_rt_mutex_waiters(lock);
cmpxchg(p, owner, 0) != owner
enqueue_waiter();
unlock(wait_lock);
lock(wait_lock);
wakeup_next waiter();
unlock(wait_lock);
lock(wait_lock);
acquire(lock);
If the fast path is disabled, then the simple
m->owner = NULL;
unlock(m->wait_lock);
is sufficient as all access to m->owner is serialized via
m->wait_lock;
Also document and clarify the wakeup_next_waiter function as suggested
by Oleg Nesterov.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140611183852.937945560@linutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull more locking changes from Ingo Molnar:
"This is the second round of locking tree updates for v3.16, offering
large system scalability improvements:
- optimistic spinning for rwsems, from Davidlohr Bueso.
- 'qrwlocks' core code and x86 enablement, from Waiman Long and PeterZ"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, locking/rwlocks: Enable qrwlocks on x86
locking/rwlocks: Introduce 'qrwlocks' - fair, queued rwlocks
locking/mutexes: Documentation update/rewrite
locking/rwsem: Fix checkpatch.pl warnings
locking/rwsem: Fix warnings for CONFIG_RWSEM_GENERIC_SPINLOCK
locking/rwsem: Support optimistic spinning
When we walk the lock chain, we drop all locks after each step. So the
lock chain can change under us before we reacquire the locks. That's
harmless in principle as we just follow the wrong lock path. But it
can lead to a false positive in the dead lock detection logic:
T0 holds L0
T0 blocks on L1 held by T1
T1 blocks on L2 held by T2
T2 blocks on L3 held by T3
T4 blocks on L4 held by T4
Now we walk the chain
lock T1 -> lock L2 -> adjust L2 -> unlock T1 ->
lock T2 -> adjust T2 -> drop locks
T2 times out and blocks on L0
Now we continue:
lock T2 -> lock L0 -> deadlock detected, but it's not a deadlock at all.
Brad tried to work around that in the deadlock detection logic itself,
but the more I looked at it the less I liked it, because it's crystal
ball magic after the fact.
We actually can detect a chain change very simple:
lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 ->
next_lock = T2->pi_blocked_on->lock;
drop locks
T2 times out and blocks on L0
Now we continue:
lock T2 ->
if (next_lock != T2->pi_blocked_on->lock)
return;
So if we detect that T2 is now blocked on a different lock we stop the
chain walk. That's also correct in the following scenario:
lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 ->
next_lock = T2->pi_blocked_on->lock;
drop locks
T3 times out and drops L3
T2 acquires L3 and blocks on L4 now
Now we continue:
lock T2 ->
if (next_lock != T2->pi_blocked_on->lock)
return;
We don't have to follow up the chain at that point, because T2
propagated our priority up to T4 already.
[ Folded a cleanup patch from peterz ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Brad Mouring <bmouring@ni.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140605152801.930031935@linutronix.de
Cc: stable@vger.kernel.org
Even in the case when deadlock detection is not requested by the
caller, we can detect deadlocks. Right now the code stops the lock
chain walk and keeps the waiter enqueued, even on itself. Silly not to
yell when such a scenario is detected and to keep the waiter enqueued.
Return -EDEADLK unconditionally and handle it at the call sites.
The futex calls return -EDEADLK. The non futex ones dequeue the
waiter, throw a warning and put the task into a schedule loop.
Tagged for stable as it makes the code more robust.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brad Mouring <bmouring@ni.com>
Link: http://lkml.kernel.org/r/20140605152801.836501969@linutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This rwlock uses the arch_spin_lock_t as a waitqueue, and assuming the
arch_spin_lock_t is a fair lock (ticket,mcs etc..) the resulting
rwlock is a fair lock.
It fits in the same 8 bytes as the regular rwlock_t by folding the
reader and writer count into a single integer, using the remaining 4
bytes for the arch_spinlock_t.
Architectures that can single-copy adress bytes can optimize
queue_write_unlock() with a 0 write to the LSB (the write count).
Performance as measured by Davidlohr Bueso (rwlock_t -> qrwlock_t):
+--------------+-------------+---------------+
| Workload | #users | delta |
+--------------+-------------+---------------+
| alltests | > 1400 | -4.83% |
| custom | 0-100,> 100 | +1.43%,-1.57% |
| high_systime | > 1000 | -2.61 |
| shared | all | +0.32 |
+--------------+-------------+---------------+
http://www.stgolabs.net/qrwlock-stuff/aim7-results-vs-rwsem_optsin/
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
[peterz: near complete rewrite]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-gac1nnl3wvs2ij87zv2xkdzq@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
WARNING: line over 80 characters
#205: FILE: kernel/locking/rwsem-xadd.c:275:
+ old = cmpxchg(&sem->count, count, count + RWSEM_ACTIVE_WRITE_BIAS);
WARNING: line over 80 characters
#376: FILE: kernel/locking/rwsem-xadd.c:434:
+ * If there were already threads queued before us and there are no
WARNING: line over 80 characters
#377: FILE: kernel/locking/rwsem-xadd.c:435:
+ * active writers, the lock must be read owned; so we try to wake
total: 0 errors, 3 warnings, 417 lines checked
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-pn6pslaplw031lykweojsn8c@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have reached the point where our mutexes are quite fine tuned
for a number of situations. This includes the use of heuristics
and optimistic spinning, based on MCS locking techniques.
Exclusive ownership of read-write semaphores are, conceptually,
just about the same as mutexes, making them close cousins. To
this end we need to make them both perform similarly, and
right now, rwsems are simply not up to it. This was discovered
by both reverting commit 4fc3f1d6 (mm/rmap, migration: Make
rmap_walk_anon() and try_to_unmap_anon() more scalable) and
similarly, converting some other mutexes (ie: i_mmap_mutex) to
rwsems. This creates a situation where users have to choose
between a rwsem and mutex taking into account this important
performance difference. Specifically, biggest difference between
both locks is when we fail to acquire a mutex in the fastpath,
optimistic spinning comes in to play and we can avoid a large
amount of unnecessary sleeping and overhead of moving tasks in
and out of wait queue. Rwsems do not have such logic.
This patch, based on the work from Tim Chen and I, adds support
for write-side optimistic spinning when the lock is contended.
It also includes support for the recently added cancelable MCS
locking for adaptive spinning. Note that is is only applicable
to the xadd method, and the spinlock rwsem variant remains intact.
Allowing optimistic spinning before putting the writer on the wait
queue reduces wait queue contention and provided greater chance
for the rwsem to get acquired. With these changes, rwsem is on par
with mutex. The performance benefits can be seen on a number of
workloads. For instance, on a 8 socket, 80 core 64bit Westmere box,
aim7 shows the following improvements in throughput:
+--------------+---------------------+-----------------+
| Workload | throughput-increase | number of users |
+--------------+---------------------+-----------------+
| alltests | 20% | >1000 |
| custom | 27%, 60% | 10-100, >1000 |
| high_systime | 36%, 30% | >100, >1000 |
| shared | 58%, 29% | 10-100, >1000 |
+--------------+---------------------+-----------------+
There was also improvement on smaller systems, such as a quad-core
x86-64 laptop running a 30Gb PostgreSQL (pgbench) workload for up
to +60% in throughput for over 50 clients. Additionally, benefits
were also noticed in exim (mail server) workloads. Furthermore, no
performance regression have been seen at all.
Based-on-work-from: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
[peterz: rej fixup due to comment patches, sched/rt.h header]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Scott J Norton" <scott.norton@hp.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Link: http://lkml.kernel.org/r/1399055055.6275.15.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler updates from Ingo Molnar:
"The main scheduling related changes in this cycle were:
- various sched/numa updates, for better performance
- tree wide cleanup of open coded nice levels
- nohz fix related to rq->nr_running use
- cpuidle changes and continued consolidation to improve the
kernel/sched/idle.c high level idle scheduling logic. As part of
this effort I pulled cpuidle driver changes from Rafael as well.
- standardized idle polling amongst architectures
- continued work on preparing better power/energy aware scheduling
- sched/rt updates
- misc fixlets and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
sched/numa: Decay ->wakee_flips instead of zeroing
sched/numa: Update migrate_improves/degrades_locality()
sched/numa: Allow task switch if load imbalance improves
sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
sched: Initialize rq->age_stamp on processor start
sched, nohz: Change rq->nr_running to always use wrappers
sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
sched: Use clamp() and clamp_val() to make sys_nice() more readable
sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
sched/numa: Fix initialization of sched_domain_topology for NUMA
sched: Call select_idle_sibling() when not affine_sd
sched: Simplify return logic in sched_read_attr()
sched: Simplify return logic in sched_copy_attr()
sched: Fix exec_start/task_hot on migrated tasks
arm64: Remove TIF_POLLING_NRFLAG
metag: Remove TIF_POLLING_NRFLAG
sched/idle: Make cpuidle_idle_call() void
sched/idle: Reflow cpuidle_idle_call()
sched/idle: Delay clearing the polling bit
...
Pull RCU changes from Ingo Molnar:
"The main RCU changes in this cycle were:
- RCU torture-test changes.
- variable-name renaming cleanup.
- update RCU documentation.
- miscellaneous fixes.
- patch to suppress RCU stall warnings while sysrq requests are being
processed"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
rcu: Provide API to suppress stall warnings while sysrc runs
rcu: Variable name changed in tree_plugin.h and used in tree.c
torture: Remove unused definition
torture: Remove __init from torture_init_begin/end
torture: Check for multiple concurrent torture tests
locktorture: Remove reference to nonexistent Kconfig parameter
rcutorture: Run rcu_torture_writer at normal priority
rcutorture: Note diffs from git commits
rcutorture: Add missing destroy_timer_on_stack()
rcutorture: Explicitly test synchronous grace-period primitives
rcutorture: Add tests for get_state_synchronize_rcu()
rcutorture: Test RCU-sched primitives in TREE_PREEMPT_RCU kernels
torture: Use elapsed time to detect hangs
rcutorture: Check for rcu_torture_fqs creation errors
torture: Better summary diagnostics for build failures
torture: Notice if an all-zero cpumask is passed inside a critical section
rcutorture: Make rcu_torture_reader() use cond_resched()
sched,rcu: Make cond_resched() report RCU quiescent states
percpu: Fix raw_cpu_inc_return()
rcutorture: Export RCU grace-period kthread wait state to rcutorture
...
The current deadlock detection logic does not work reliably due to the
following early exit path:
/*
* Drop out, when the task has no waiters. Note,
* top_waiter can be NULL, when we are in the deboosting
* mode!
*/
if (top_waiter && (!task_has_pi_waiters(task) ||
top_waiter != task_top_pi_waiter(task)))
goto out_unlock_pi;
So this not only exits when the task has no waiters, it also exits
unconditionally when the current waiter is not the top priority waiter
of the task.
So in a nested locking scenario, it might abort the lock chain walk
and therefor miss a potential deadlock.
Simple fix: Continue the chain walk, when deadlock detection is
enabled.
We also avoid the whole enqueue, if we detect the deadlock right away
(A-A). It's an optimization, but also prevents that another waiter who
comes in after the detection and before the task has undone the damage
observes the situation and detects the deadlock and returns
-EDEADLOCK, which is wrong as the other task is not in a deadlock
situation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20140522031949.725272460@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull RCU updates from Paul E. McKenney:
" 1. Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/634.
2. Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/645.
3. Torture-test changes. These were posted to LKML at
https://lkml.org/lkml/2014/4/28/667.
4. Variable-name renaming cleanup, sent separately due to conflicts.
This was posted to LKML at https://lkml.org/lkml/2014/5/13/854.
5. Patch to suppress RCU stall warnings while sysrq requests are
being processed. This patch is the RCU portions of the patch
that Rik posted to LKML at https://lkml.org/lkml/2014/4/29/457.
The reason for pushing this patch ahead instead of waiting until
3.17 is that the NMI-based stack traces are messing up sysrq
output, and in some cases also messing up the system as well."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The torture tests are designed to run in isolation, but do not enforce
this isolation. This commit therefore checks for concurrent torture
tests, and refuses to start new tests while old tests are running.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The locktorture module references CONFIG_LOCK_TORTURE_TEST_RUNNABLE,
which does not exist. Which is a good thing, because otherwise
randconfig testing could enable both rcutorture and locktorture
concurrently, which the torture tests are not set up for. This
commit therefore removes the reference, so that test is runnable
immediately only when inserted as a module.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current lock_torture_writer() spends too much time sleeping and not
enough time hammering locks, as in an eight-CPU test will often only be
utilizing a CPU or two. This commit therefore makes lock_torture_writer()
sleep less and hammer more.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.
Tree sweep for rest of tree.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It took me quite a while to understand how rwsem's count field
mainifested itself in different scenarios.
Add comments to provide a quick reference to the the rwsem's count
field for each scenario where readers and writers are contending
for the lock.
Hopefully it will be useful for future maintenance of the code and
for people to get up to speed on how the logic in the code works.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Paul E.McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1399060437.2970.146.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
debug_mutex_unlock() would bail when !debug_locks and forgets to
actually unlock.
Reported-by: "Michael L. Semon" <mlsemon35@gmail.com>
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Fixes: 6f008e72cd ("locking/mutex: Fix debug checks")
Tested-by: Dave Jones <davej@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140410141559.GE13658@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the system has only one CPU, lglock is effectively a spinlock; map
it directly to spinlock to eliminate the indirection and duplicate code.
In addition to removing overhead, this drops 1.6k of code with a
defconfig modified to have !CONFIG_SMP, and 1.1k with a minimal config.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 LTO changes from Peter Anvin:
"More infrastructure work in preparation for link-time optimization
(LTO). Most of these changes is to make sure symbols accessed from
assembly code are properly marked as visible so the linker doesn't
remove them.
My understanding is that the changes to support LTO are still not
upstream in binutils, but are on the way there. This patchset should
conclude the x86-specific changes, and remaining patches to actually
enable LTO will be fed through the Kbuild tree (other than keeping up
with changes to the x86 code base, of course), although not
necessarily in this merge window"
* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
Kbuild, lto: Handle basic LTO in modpost
Kbuild, lto: Disable LTO for asm-offsets.c
Kbuild, lto: Add a gcc-ld script to let run gcc as ld
Kbuild, lto: add ld-version and ld-ifversion macros
Kbuild, lto: Drop .number postfixes in modpost
Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
lto: Disable LTO for sys_ni
lto: Handle LTO common symbols in module loader
lto, workaround: Add workaround for initcall reordering
lto: Make asmlinkage __visible
x86, lto: Disable LTO for the x86 VDSO
initconst, x86: Fix initconst mistake in ts5500 code
initconst: Fix initconst mistake in dcdbas
asmlinkage: Make trace_hardirqs_on/off_caller visible
asmlinkage, x86: Fix 32bit memcpy for LTO
asmlinkage Make __stack_chk_failed and memcmp visible
asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
asmlinkage: Make main_extable_sort_needed visible
asmlinkage, mutex: Mark __visible
asmlinkage: Make trace_hardirq visible
...
Pull scheduler changes from Ingo Molnar:
"Bigger changes:
- sched/idle restructuring: they are WIP preparation for deeper
integration between the scheduler and idle state selection, by
Nicolas Pitre.
- add NUMA scheduling pseudo-interleaving, by Rik van Riel.
- optimize cgroup context switches, by Peter Zijlstra.
- RT scheduling enhancements, by Thomas Gleixner.
The rest is smaller changes, non-urgnt fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
sched: Clean up the task_hot() function
sched: Remove double calculation in fix_small_imbalance()
sched: Fix broken setscheduler()
sparc64, sched: Remove unused sparc64_multi_core
sched: Remove unused mc_capable() and smt_capable()
sched/numa: Move task_numa_free() to __put_task_struct()
sched/fair: Fix endless loop in idle_balance()
sched/core: Fix endless loop in pick_next_task()
sched/fair: Push down check for high priority class task into idle_balance()
sched/rt: Fix picking RT and DL tasks from empty queue
trace: Replace hardcoding of 19 with MAX_NICE
sched: Guarantee task priority in pick_next_task()
sched/idle: Remove stale old file
sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED
cpuidle/arm64: Remove redundant cpuidle_idle_call()
cpuidle/powernv: Remove redundant cpuidle_idle_call()
sched, nohz: Exclude isolated cores from load balancing
sched: Fix select_task_rq_fair() description comments
workqueue: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
...
Pull RCU updates from Ingo Molnar:
"Main changes:
- Torture-test changes, including refactoring of rcutorture and
introduction of a vestigial locktorture.
- Real-time latency fixes.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcu: Provide grace-period piggybacking API
rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
Documentation/memory-barriers.txt: Clarify release/acquire ordering
rcutorture: Save kvm.sh output to log
rcutorture: Add a lock_busted to test the test
rcutorture: Place kvm-test-1-run.sh output into res directory
rcutorture: Rename TREE_RCU-Kconfig.txt
locktorture: Add kvm-recheck.sh plug-in for locktorture
rcutorture: Gracefully handle NULL cleanup hooks
locktorture: Add vestigial locktorture configuration
rcutorture: Introduce "rcu" directory level underneath configs
rcutorture: Rename kvm-test-1-rcu.sh
rcutorture: Remove RCU dependencies from ver_functions.sh API
rcutorture: Create CFcommon file for common Kconfig parameters
rcutorture: Create config files for scripted test-the-test testing
rcutorture: Add an rcu_busted to test the test
locktorture: Add a lock-torture kernel module
rcutorture: Abstract kvm-recheck.sh
...
OK, so commit:
1d8fe7dc80 ("locking/mutexes: Unlock the mutex without the wait_lock")
generates this boot warning when CONFIG_DEBUG_MUTEXES=y:
WARNING: CPU: 0 PID: 139 at /usr/src/linux-2.6/kernel/locking/mutex-debug.c:82 debug_mutex_unlock+0x155/0x180() DEBUG_LOCKS_WARN_ON(lock->owner != current)
And that makes sense, because as soon as we release the lock a
new owner can come in...
One would think that !__mutex_slowpath_needs_to_unlock()
implementations suffer the same, but for DEBUG we fall back to
mutex-null.h which has an unconditional 1 for that.
The mutex debug code requires the mutex to be unlocked after
doing the debug checks, otherwise it can find inconsistent
state.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jason.low2@hp.com
Link: http://lkml.kernel.org/r/20140312122442.GB27965@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add in an extra reschedule in an attempt to avoid getting reschedule
the moment we've acquired the lock.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-zah5eyn9gu7qlgwh9r6n2anc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The mutex->spin_mlock was introduced in order to ensure that only 1 thread
spins for lock acquisition at a time to reduce cache line contention. When
lock->owner is NULL and the lock->count is still not 1, the spinner(s) will
continually release and obtain the lock->spin_mlock. This can generate
quite a bit of overhead/contention, and also might just delay the spinner
from getting the lock.
This patch modifies the way optimistic spinners are queued by queuing before
entering the optimistic spinning loop as oppose to acquiring before every
call to mutex_spin_on_owner(). So in situations where the spinner requires
a few extra spins before obtaining the lock, then there will only be 1 spinner
trying to get the lock and it will avoid the overhead from unnecessarily
unlocking and locking the spin_mlock.
Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: tglx@linutronix.de
Cc: riel@redhat.com
Cc: akpm@linux-foundation.org
Cc: davidlohr@hp.com
Cc: hpa@zytor.com
Cc: andi@firstfloor.org
Cc: aswin@hp.com
Cc: scott.norton@hp.com
Cc: chegu_vinod@hp.com
Cc: Waiman.Long@hp.com
Cc: paulmck@linux.vnet.ibm.com
Cc: torvalds@linux-foundation.org
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1390936396-3962-3-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The mcs_spinlock code is not meant (or suitable) as a generic locking
primitive, therefore take it away from the normal includes and place
it in kernel/locking/.
This way the locking primitives implemented there can use it as part
of their implementation but we do not risk it getting used
inapropriately.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-byirmpamgr7h25m5kyavwpzx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit adds a maximally broken locking primitive in which
lock acquisition and release are both no-ops.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit adds the locking counterpart to rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Make n_lock_torture_errors and torture_spinlock static
as suggested by Fengguang Wu. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If a PI boosted task policy/priority is modified by a setscheduler()
call we unconditionally dequeue and requeue the task if it is on the
runqueue even if the new priority is lower than the current effective
boosted priority. This can result in undesired reordering of the
priority bucket list.
If the new priority is less or equal than the current effective we
just store the new parameters in the task struct and leave the
scheduler class and the runqueue untouched. This is handled when the
task deboosts itself. Only if the new priority is higher than the
effective boosted priority we apply the change immediately.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebase ontop of v3.14-rc1. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1391803122-4425-7-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Various kernel/mutex.c functions can be called from
inline assembler, so they should be all global and
__visible.
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391845930-28580-7-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
lockdep_sys_exit can be called from assembler code, so make it
asmlinkage.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391845930-28580-5-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The __lockdep_no_validate check in mark_held_locks() adds the subtle
and (afaics) unnecessary difference between no-validate and check==0.
And this looks even more inconsistent because __lock_acquire() skips
mark_irqflags()->mark_lock() if !check.
Change mark_held_locks() to check hlock->check instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140120182013.GA26505@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Test-case:
DEFINE_MUTEX(m1);
DEFINE_MUTEX(m2);
DEFINE_MUTEX(mx);
void lockdep_should_complain(void)
{
lockdep_set_novalidate_class(&mx);
// m1 -> mx -> m2
mutex_lock(&m1);
mutex_lock(&mx);
mutex_lock(&m2);
mutex_unlock(&m2);
mutex_unlock(&mx);
mutex_unlock(&m1);
// m2 -> m1 ; should trigger the warning
mutex_lock(&m2);
mutex_lock(&m1);
mutex_unlock(&m1);
mutex_unlock(&m2);
}
this doesn't trigger any warning, lockdep can't detect the trivial
deadlock.
This is because lock(&mx) correctly avoids m1 -> mx dependency, it
skips validate_chain() due to mx->check == 0. But lock(&m2) wrongly
adds mx -> m2 and thus m1 -> m2 is not created.
rcu_lock_acquire()->lock_acquire(check => 0) is fine due to read == 2,
so currently only __lockdep_no_validate__ can trigger this problem.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140120182010.GA26498@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "int check" argument of lock_acquire() and held_lock->check are
misleading. This is actually a boolean: 2 means "true", everything
else is "false".
And there is no need to pass 1 or 0 to lock_acquire() depending on
CONFIG_PROVE_LOCKING, __lock_acquire() checks prove_locking at the
start and clears "check" if !CONFIG_PROVE_LOCKING.
Note: probably we can simply kill this member/arg. The only explicit
user of check => 0 is rcu_lock_acquire(), perhaps we can change it to
use lock_acquire(trylock =>, read => 2). __lockdep_no_validate means
check => 0 implicitly, but we can change validate_chain() to check
hlock->instance->key instead. Not to mention it would be nice to get
rid of lockdep_set_novalidate_class().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140120182006.GA26495@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We will need the MCS lock code for doing optimistic spinning for rwsem
and queued rwlock. Extracting the MCS code from mutex.c and put into
its own file allow us to reuse this code easily.
We also inline mcs_spin_lock and mcs_spin_unlock functions
for better efficiency.
Note that using the smp_load_acquire/smp_store_release pair used in
mcs_lock and mcs_unlock is not sufficient to form a full memory barrier
across cpus for many architectures (except x86). For applications that
absolutely need a full barrier across multiple cpus with mcs_unlock and
mcs_lock pair, smp_mb__after_unlock_lock() should be used after mcs_lock.
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1390347360.3138.63.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch corrects the way memory barriers are used in the MCS lock
with smp_load_acquire and smp_store_release fucnctions. The previous
barriers could leak critical sections if mcs lock is used by itself.
It is not a problem when mcs lock is embedded in mutex but will be an
issue when the mcs_lock is used elsewhere.
The patch removes the incorrect barriers and put in correct
barriers with the pair of functions smp_load_acquire and smp_store_release.
Suggested-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1390347353.3138.62.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler changes from Ingo Molnar:
- Add the initial implementation of SCHED_DEADLINE support: a real-time
scheduling policy where tasks that meet their deadlines and
periodically execute their instances in less than their runtime quota
see real-time scheduling and won't miss any of their deadlines.
Tasks that go over their quota get delayed (Available to privileged
users for now)
- Clean up and fix preempt_enable_no_resched() abuse all around the
tree
- Do sched_clock() performance optimizations on x86 and elsewhere
- Fix and improve auto-NUMA balancing
- Fix and clean up the idle loop
- Apply various cleanups and fixes
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
sched: Fix __sched_setscheduler() nice test
sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
sched: Fix up attr::sched_priority warning
sched: Fix up scheduler syscall LTP fails
sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
sched/core: Fix htmldocs warnings
sched/deadline: No need to check p if dl_se is valid
sched/deadline: Remove unused variables
sched/deadline: Fix sparse static warnings
m68k: Fix build warning in mac_via.h
sched, thermal: Clean up preempt_enable_no_resched() abuse
sched, net: Fixup busy_loop_us_clock()
sched, net: Clean up preempt_enable_no_resched() abuse
sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
sched/preempt, locking: Rework local_bh_{dis,en}able()
sched/clock, x86: Avoid a runtime condition in native_sched_clock()
sched/clock: Fix up clear_sched_clock_stable()
sched/clock, x86: Use a static_key for sched_clock_stable
sched/clock: Remove local_irq_disable() from the clocks
sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
...
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Turn the pi-chains from plist to rb-tree, in the rt_mutex code,
and provide a proper comparison function for -deadline and
-priority tasks.
This is done mainly because:
- classical prio field of the plist is just an int, which might
not be enough for representing a deadline;
- manipulating such a list would become O(nr_deadline_tasks),
which might be to much, as the number of -deadline task increases.
Therefore, an rb-tree is used, and tasks are queued in it according
to the following logic:
- among two -priority (i.e., SCHED_BATCH/OTHER/RR/FIFO) tasks, the
one with the higher (lower, actually!) prio wins;
- among a -priority and a -deadline task, the latter always wins;
- among two -deadline tasks, the one with the earliest deadline
wins.
Queueing and dequeueing functions are changed accordingly, for both
the list of a task's pi-waiters and the list of tasks blocked on
a pi-lock.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-again-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-10-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When mutex debugging is enabled and an imbalanced mutex_unlock()
is called, we get the following, slightly confusing warning:
[ 364.208284] DEBUG_LOCKS_WARN_ON(lock->owner != current)
But in that case the warning is due to an imbalanced mutex_unlock() call,
and the lock->owner is NULL - so the message is misleading.
So improve the message by testing for this case specifically:
DEBUG_LOCKS_WARN_ON(!lock->owner)
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1386136693.3650.48.camel@cliu38-desktop-build
[ Improved the changelog, changed the patch to use !lock->owner consistently. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep is an awesome piece of code which detects locking issues
which are relevant both to userspace and kernelspace. We can
easily make lockdep work in userspace since there is really no
kernel spacific magic going on in the code.
All we need is to wrap two functions which are used by lockdep
and are very kernel specific.
Doing that will allow tools located in tools/ to easily utilize
lockdep's code for their own use.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: penberg@kernel.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/1352753446-24109-1-git-send-email-sasha.levin@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are new Sparse warnings:
>> kernel/locking/lockdep.c:1235:15: sparse: symbol '__lockdep_count_forward_deps' was not declared. Should it be static?
>> kernel/locking/lockdep.c:1261:15: sparse: symbol '__lockdep_count_backward_deps' was not declared. Should it be static?
Please consider folding the attached diff :-)
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/527d1787.ThzXGoUspZWehFDl\%fengguang.wu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Notably: changed lib/rwsem* targets from lib- to obj-, no idea about
the ramifications of that.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-g0kynfh5feriwc6p3h6kpbw6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sebastian Andrzej Siewior