Networking has many sysctls that could fit in one u8.
This patch adds proc_dou8vec_minmax() for this purpose.
Note that the .extra1 and .extra2 fields are pointing
to integers, because it makes conversions easier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Voon Weifeng says:
====================
net: stmmac: enable multi-vector MSI
This patchset adds support for multi MSI interrupts in addition to
current single common interrupt implementation. Each MSI interrupt is tied
to a newly introduce interrupt service routine(ISR). Hence, each interrupt
will only go through the corresponding ISR.
In order to increase the efficiency, enabling multi MSI interrupt will
automatically select the interrupt mode configuration INTM=1. When INTM=1,
the TX/RX transfer complete signal will only asserted on corresponding
sbd_perch_tx_intr_o[] or sbd_perch_rx_intr_o[] without asserting signal
on the common sbd_intr_o. Hence, for each TX/RX interrupts, only the
corresponding ISR will be triggered.
Every vendor might have different MSI vector assignment. So, this patchset
only includes multi-vector MSI assignment for Intel platform.
Changes:
v1 -> v2
patch 2/5
-Remove defensive check for invalid dev pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For interrupt mode INTM=0, TX/RX transfer complete will trigger signal
not only on sbd_perch_[tx|rx]_intr_o (Transmit/Receive Per Channel) but
also on the sbd_intr_o (Common).
As for multi-MSI implementation, setting interrupt mode INTM=1 is more
efficient as each TX intr and RX intr (TI/RI) will be handled by TX/RX ISR
without the need of calling the common MAC ISR.
Updated the TX/RX NORMAL interrupts status checking process as the
NIS status bit is not asserted for any RI/TI events for INTM=1.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intel mgbe controller supports multi-vector interrupts:
msi_rx_vec 0,2,4,6,8,10,12,14
msi_tx_vec 1,3,5,7,9,11,13,15
msi_sfty_ue_vec 26
msi_sfty_ce_vec 27
msi_lpi_vec 28
msi_mac_vec 29
During probe(), the driver will starts with request allocation for
multi-vector interrupts. If it fails, then it will automatically fallback
to request allocation for single interrupts.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now we introduce MSI interrupt service routines and hook these routines
up if stmmac_open() sees valid irq line being requested:-
stmmac_mac_interrupt() :- MAC (dev->irq), WOL (wol_irq), LPI (lpi_irq)
stmmac_safety_interrupt() :- Safety Feat Correctible Error (sfty_ce_irq)
& Uncorrectible Error (sfty_ue_irq)
stmmac_msi_intr_rx() :- For all RX MSI irq (rx_irq)
stmmac_msi_intr_tx() :- For all TX MSI irq (tx_irq)
Each of IRQs will have its unique name so that we can differentiate
them easily under /proc/interrupts.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor stmmac_interrupt() by introducing stmmac_common_interrupt()
so that we prepare the ISR operation to be friendly to MSI later.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to make stmmac support multi-vector MSI, we introduce the
interrupt status masking according to RX, TX or RXTX. Default to use RXTX
inside stmmac_dma_interrupt(), so there is no run-time logic difference
now.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_unregister_timeout_secs=0 can lead to printing the
"waiting for dev to become free" message every jiffy.
This is too frequent and unnecessary.
Set the min value to 1 second.
Also fix the merge issue introduced by
"net: make unregister netdev warning timeout configurable":
it changed "refcnt != 1" to "refcnt".
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 5aa3afe107 ("net: make unregister netdev warning timeout configurable")
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: update registers for other versions
This series updates IPA and GSI register definitions to permit more
versions of IPA hardware to be supported. Most of the updates are
informational, updating comments to indicate which IPA versions
support each register and field. But some registers are new and
others are deprecated. In a few cases register fields are laid
out differently, and in these cases the changes are a little more
substantive.
I won't claim the result is 100% correct, but it's close, and should
allow all IPA versions 3.x through 4.x to be supported by the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA v4.5 (GSI v2.5) supports a larger set of channel protocols, and
adds an additional field to hold the most-significant bits of the
protocol identifier on a channel.
Add an inline function that encodes the protocol (including the
extra bits for newer versions of IPA), and define some additional
protocols. At this point we still use only GPI protocol.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each GSI channel has a CNTXT_1 register that encodes the size of its
ring buffer. The size of the field that records that is increased
starting at IPA v4.9. Replace the use of a fixed-size field mask
with a new inline function that encodes that size value.
Similarly, the size of GSI event rings can be larger starting with
IPA v4.9, so create a function to encode that as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main purpose of this is to extend these GSI register definitions
to support additional IPA versions.
This patch makes some minor updates to "gsi_reg.h":
- Define a DB_IN_BYTES field in the channel QOS register
- Add some comments clarifying when certain fields are valid
- Add the definition of GSI_CH_DB_STOP channel command
- Add a couple of blank lines
- Move one comment and indent another
- Delete two unused register definitions at the end.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting with IPA v4.7, registers related to IPA interrupts are
located at a fixed offset 0x1000 above than the addresses used for
earlier versions. Define and use functions to provide the offset to
use for these registers based on IPA version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPA version 4.9 and later use a different layout of some fields
found in the COMP_CFG register.
Define arbitration_lock_disable_encoded(), and use it to encode a
value into the ATOMIC_FETCHER_ARB_LOCK_DIS field based on the IPA
version.
And define full_flush_rsc_closure_en_encoded() to encode a value
into the FULL_FLUSH_WAIT_RSC_CLOSE_EN field based on the IPA
version.
The values of these fields are neither modified nor extracted by
current code, but this patch makes this possible for all supported
versions.
Fix a mistaken comment above ipa_hardware_config_comp() intended to
describe the purpose for the register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add and update IPA register definitions. Extend these definitions
to incorporate a fairly small number of new symbols (register
offsets and fields) to support IPA v3.0, v3.1, v3.5, v4.0, v4.1,
v4.7, 4.9, and v4.11, and have the comments reflect when they are
valid. None of the added symbols require changes elsewhere in the
code.
Update rsrc_grp_encoded() to support these other IPA versions.
Add kerneldoc comments for the IPA IRQ numbers and sequencer type.
Fix a few spots where the version check should be less restrictive
(missed by an earlier patch).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC reports the following warning with W=1:
drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c:80:9: warning:
variable 'count' set but not used [-Wunused-but-set-variable]
80 | int i, count;
| ^~~~~
This variable is not used in function , this commit
remove it to fix the warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can simply use rtl_hw_start_8168c_2() also for chip version 21.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daode Huang says:
====================
net: gve: make cleanup for gve
This patch set replace deprecated strlcpy by strscpy, remove
repeat word "allowed" in gve driver.
for more details, please refer to each patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fix the WARNING of Possible repeated word: 'allowed'
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Usage of strlcpy in linux kernel has been recently deprecated[1], so
convert gve driver to strscpy
[1] https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL
=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "accomodate" to "accommodate" in net/ipv4/esp4.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "Apparantly" to "Apparently" in net/dsa/tag_rtl4_a.c..
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "erronous" to "erroneous" in net/decnet/dn_nsp_in.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "funciton" to "function" in net/core/dev_addr_lists.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify "inital" to "initial" in net/ceph/osdmap.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct sk_buff has been declared. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove including <linux/version.h> that don't need it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove including <linux/version.h> that don't need it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/addres/address
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove including <linux/version.h> that don't need it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack error messages for -EINVAL errors when enabling bearer,
getting/setting properties for a media/bearer
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethtool: clarify the ethtool FEC interface
Our FEC configuration interface is one of the more confusing.
It also lacks any error checking in the core. This certainly
shows in the varying implementations across the drivers.
Improve the documentation and add most basic checks. Sadly, it's
probably too late now to try to enforce much more uniformity.
Any thoughts & suggestions welcome. Next step is to add netlink
for FEC, then stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reject NONE on set, this mode means device does not support
FEC so it's a little out of place in the set interface.
This should be safe to do - user space ethtool does not allow
the use of NONE on set. A few drivers treat it the same as OFF,
but none use it instead of OFF.
Similarly reject an empty FEC mask. The common user space tool
will not send such requests and most drivers correctly reject
it already.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::active_fec is a GET-only field,
all in-tree drivers correctly ignore it on SET. Clear
the field on SET to avoid any confusion. Again, we can't
reject non-zero now since ethtool user space does not
zero-init the param correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct ethtool_fecparam::reserved is never looked at by the core.
Make sure it's actually 0. Unfortunately we can't return an error
because old ethtool doesn't zero-initialize the structure for SET.
On GET we can be more verbose, there are no in tree (ab)users.
Fix up the kdoc on the structure. Remove the mention of FEC
bypass. Seems like a niche thing to configure in the first
place.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Digging through the mailing list archive @autoneg was part
of the first version of the RFC, this left over comment was
pointed out twice in review but wasn't removed.
The sentence is an exact copy-paste from pauseparam.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/porte/the port/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-24
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).
The main changes are:
1) Static linking of multiple BPF ELF files, from Andrii.
2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.
3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
gcov, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: update Andrey Konovalov's email address
mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm: memblock: fix section mismatch warning again
kfence: make compatible with kmemleak
gcov: fix clang-11+ support
ia64: fix format strings for err_inject
ia64: mca: allocate early mca with GFP_ATOMIC
squashfs: fix xattr id and id lookup sanity checks
squashfs: fix inode lookup sanity checks
z3fold: prevent reclaim/free race for headless pages
selftests/vm: fix out-of-tree build
mm/mmu_notifiers: ensure range_end() is paired with range_start()
kasan: fix per-page tags for non-page_alloc pages
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----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=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBccr0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG6UCACDbz3BO/y40wRhWwMhvDhyFDqtlTlVEQlb
hxnJzksXOlbqHB1J7yamzXxS1UlCBlhvjrFNTe1s5LJIfB0niMskYLe2p0dJ/voi
WyysvaiK7/1bZV/RRdF7r+hFtMPHBEAKfgs+ZxFN9mnMcserV8PWqiD5ookCqavE
xatE/fEgVujiISl/BOkP1pnmWnPM4f9BIMS5DgaZJsNDYtxeu9a3RGnfu9vNHaP2
gxq5+E3BjZfh1z0++HP6nTuDbdDaxEz12gyoZ+4wejXVhwj1g7NySJNa8RmJG9pU
gX+jE6HOgeCFIEe9Gx+I2QtAaFia96HVnAAHagGBHB1vfV7GTRxN
=tzbO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
workarounds:
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: disable CNP on Carmel
arm64/process.c: fix Wmissing-prototypes build warnings
kselftest/arm64: sve: Do not use non-canonical FFR register value
arm64: mm: correct the inside linear map range during hotplug check
arm64: kdump: update ppos when reading elfcorehdr
arm64: cpuinfo: Fix a typo
Documentation: arm64/acpi : clarify arm64 support of IBFT
arm64: stacktrace: don't trace arch_stack_walk()
arm64: csum: cast to the proper type
Redirect my older email addresses in the git logs.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot found that __kmap_local_sched_out() was not
correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was
set.[1] This was due to DEBUG_HIGHMEM check being used.
Change the configuration check to be correct.
[1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com
Fixes: 0e91a0c698 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Cc: David Sterba <dsterba@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 34dc2efb39 ("memblock: fix section mismatch warning") marked
memblock_bottom_up() and memblock_set_bottom_up() as __init, but they
could be referenced from non-init functions like
memblock_find_in_range_node() on architectures that enable
CONFIG_ARCH_KEEP_MEMBLOCK.
For such builds kernel test robot reports:
WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up()
The function memblock_find_in_range_node() references the function __init memblock_bottom_up().
This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong.
Replace __init annotations with __init_memblock annotations so that the
appropriate section will be selected depending on
CONFIG_ARCH_KEEP_MEMBLOCK.
Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com
Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org
Fixes: 34dc2efb39 ("memblock: fix section mismatch warning")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".
The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.
For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().
Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet