The local variables cur_state and new_state hold the state that should be
used for the modify QP operation instead of the ones in the ib_qp_attr
struct.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20201201091724.37016-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c2819140 ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two earlier bug fixes have created a security problem in the hfi1
driver. One fix aimed to solve an issue where current->mm was not valid
when closing the hfi1 cdev. It attempted to do this by saving a cached
value of the current->mm pointer at file open time. This is a problem if
another process with access to the FD calls in via write() or ioctl() to
pin pages via the hfi driver. The other fix tried to solve a use after
free by taking a reference on the mm.
To fix this correctly we use the existing cached value of the mm in the
mmu notifier. Now we can check in the insert, evict, etc. routines that
current->mm matched what the notifier was registered for. If not, then
don't allow access. The register of the mmu notifier will save the mm
pointer.
Since in do_exit() the exit_mm() is called before exit_files(), which
would call our close routine a reference is needed on the mm. We rely on
the mmgrab done by the registration of the notifier, whereas before it was
explicit. The mmu notifier deregistration happens when the user context is
torn down, the creation of which triggered the registration.
Also of note is we do not do any explicit work to protect the interval
tree notifier. It doesn't seem that this is going to be needed since we
aren't actually doing anything with current->mm. The interval tree
notifier stuff still has a FIXME noted from a previous commit that will be
addressed in a follow on patch.
Cc: <stable@vger.kernel.org>
Fixes: e0cf75deab ("IB/hfi1: Fix mm_struct use after free")
Fixes: 3faa3d9a30 ("IB/hfi1: Make use of mm consistent")
Link: https://lore.kernel.org/r/20201125210112.104301.51331.stgit@awfm-01.aw.intel.com
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap
vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range
without any validation. This is vulnerable to an mmap exploit as described
in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com
The push feature is disabled in the driver currently and therefore no push
mmaps are issued from user-space. The feature does not work as expected in
the x722 product.
Remove the push module parameter and all VMA attribute manipulations for
this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user
mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound
to a single page.
Cc: <stable@kernel.org>
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com
Reported-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We return 'err' in the error branch, but this variable may be set as zero
by the above code. Fix it by setting 'err' as a negative value before we
goto the error label.
Fixes: 74c2174e7b ("IB uverbs: add mthca user CQ support")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/1605837422-42724-1-git-send-email-wangxiongfeng2@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 4730f4a6c6 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1605249747-17942-1-git-send-email-zhangchangzhong@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix missing kfree in pvrdma_register_device() when failure from
ib_device_set_netdev().
Fixes: 4b38da75e0 ("RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()")
Link: https://lore.kernel.org/r/20201111032202.17925-1-miaoqinglang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pvrdma_port_attr structure is ABI toward the hypervisor, changing it
breaks the ability to report the speed properly. Revert the change to u16.
Fixes: 376ceb31ff ("RDMA: Fix link active_speed size")
Link: https://lore.kernel.org/r/20201102225437.26557-1-aditr@vmware.com
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a mlx5 core devlink instance is reloaded in different net namespace,
its associated IB device is deleted and recreated.
Example sequence is:
$ ip netns add foo
$ devlink dev reload pci/0000:00:08.0 netns foo
$ ip netns del foo
mlx5 IB device needs to attach and detach the netdevice to it through the
netdev notifier chain during load and unload sequence. A below call graph
of the unload flow.
cleanup_net()
down_read(&pernet_ops_rwsem); <- first sem acquired
ops_pre_exit_list()
pre_exit()
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one()
[...]
mlx5_ib_remove()
mlx5_ib_unbind_slave_port()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier()
down_write(&pernet_ops_rwsem);<- recurrsive lock
Hence, when net namespace is deleted, mlx5 reload results in deadlock.
When deadlock occurs, devlink mutex is also held. This not only deadlocks
the mlx5 device under reload, but all the processes which attempt to
access unrelated devlink devices are deadlocked.
Hence, fix this by mlx5 ib driver to register for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 4383cfcc65 ("net/mlx5: Add devlink reload")
Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The typical set of driver updates across the subsystem:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns,
usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where MRA
wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail at
the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist
-----BEGIN PGP SIGNATURE-----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=LKpl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
The code in setup_dma_device has become rather convoluted, move all of
this to the drivers. Drives now pass in a DMA capable struct device which
will be used to setup DMA, or drivers must fully configure the ibdev for
DMA and pass in NULL.
Other than setting the masks in rvt all drivers were doing this already
anyhow.
mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for
DMA based on their hardweare limits in:
__mthca_init_one()
dma_set_max_seg_size (1G)
__mlx4_init_one()
dma_set_max_seg_size (1G)
mlx5_pci_init()
set_dma_caps()
dma_set_max_seg_size (2G)
Other non software drivers (except usnic) were extended to UINT_MAX [1, 2]
instead of 2G as was before.
[1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
[2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/
Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org
Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An incorrect sizeof is being used, u64 * is not correct, it should be just
u64 for a table of umem_pgs number of u64 items in the pbl_tbl. Use the
idiom sizeof(*pbl_tbl) to get the object type without the need to
explicitly use u64.
Link: https://lore.kernel.org/r/20201006114700.537916-1-colin.king@canonical.com
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver is taking the SGL out of the umem and passing it through a
struct bnxt_qplib_sg_info. Instead of passing the SGL pass the umem and
then use rdma_umem_for_each_dma_block() directly.
Move the calls of ib_umem_num_dma_blocks() closer to their actual point of
use, npages is only set for non-umem pbl flows.
Link: https://lore.kernel.org/r/0-v1-b37437a73f35+49c-bnxt_re_dma_block_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate IB_GID_TYPE_IB and IB_GID_TYPE_ROCE to two different values, so
enum ib_gid_type will match the gid types of the new query GID table API
which will be introduced in the following patches.
This change in enum ib_gid_type requires to change also enum
rdma_network_type by separating RDMA_NETWORK_IB and RDMA_NETWORK_ROCE_V1
values.
Link: https://lore.kernel.org/r/20200923165015.2491894-3-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Making a change to fix following sparse warnings reported by kbuild bot.
CHECK drivers/infiniband/hw/qedr/verbs.c
drivers/infiniband/hw/qedr/verbs.c:3872:59: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/qedr/verbs.c:3872:59: expected restricted __le32 [usertype] sge_prod
drivers/infiniband/hw/qedr/verbs.c:3872:59: got unsigned int [usertype] sge_prod
drivers/infiniband/hw/qedr/verbs.c:3875:59: warning: incorrect type in assignment (different base types)
drivers/infiniband/hw/qedr/verbs.c:3875:59: expected restricted __le32 [usertype] wqe_prod
drivers/infiniband/hw/qedr/verbs.c:3875:59: got unsigned int [usertype] wqe_prod
Link: https://lore.kernel.org/r/20201001100959.19940-1-palok@marvell.com
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: acca72e2b0 ("RDMA/qedr: SRQ's bug fixes")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Sync device with CPU pages upon ODP MR registration. mlx5 already has to
zero the HW's version of the PAS list, may as well deliver a PAS list that
matches the current CPU page tables configuration.
Link: https://lore.kernel.org/r/20200930163828.1336747-5-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Extend advice MR to support non faulting mode, this can improve
performance by increasing the populated page tables in the device.
Link: https://lore.kernel.org/r/20200930163828.1336747-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Enable ODP sync without faulting, this improves performance by reducing
the number of page faults in the system.
The gain from this option is that the device page table can be aligned
with the presented pages in the CPU page table without causing page
faults.
As of that, the overhead on data path from hardware point of view to
trigger a fault which end-up by calling the driver to bring the pages
will be dropped.
Link: https://lore.kernel.org/r/20200930163828.1336747-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move to use hmm_range_fault() instead of get_user_pags_remote() to improve
performance in a few aspects:
This includes:
- Dropping the need to allocate and free memory to hold its output
- No need any more to use put_page() to unpin the pages
- The logic to detect contiguous pages is done based on the returned
order, no need to run per page and evaluate.
In addition, moving to use hmm_range_fault() enables to reduce page faults
in the system with it's snapshot mode, this will be introduced in next
patches from this series.
As part of this, cleanup some flows and use the required data structures
to work with hmm_range_fault().
Link: https://lore.kernel.org/r/20200930163828.1336747-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some code was removed but the variables were still there, and some
parameters have been changed to be queried from firmware. So the
definitions of them are no longer needed.
Fixes: 2a3d923f87 ("RDMA/hns: Replace magic numbers with #defines")
Fixes: 82e620d9c3 ("RDMA/hns: Modify the data structure of hns_roce_av")
Fixes: 8254746978 ("IB/hns: Implement the add_gid/del_gid and optimize the GIDs management")
Fixes: 21b97f5387 ("RDMA/hns: Fixup qp release bug")
Link: https://lore.kernel.org/r/1601371934-40003-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no real need to have an intermediate pointer for the same struct,
remove it, and use struct directly.
Link: https://lore.kernel.org/r/20200926102450.2966017-11-leon@kernel.org
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As preparation for the removal of QP allocation logic, we need to ensure
that ib_core allocates the right amount of memory before a call to the
driver create_qp(). It requires from driver to have the same structs for
all types of QPs.
Link: https://lore.kernel.org/r/20200926102450.2966017-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP can't be created from the user space, hence the udata check is
always false (udata == NULL). Remove that check and simplify the flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-9-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since all mlx4 QP have same storage type, move the QP allocation to be in
one place. This change is preparation to removal of such allocation from
the driver.
Link: https://lore.kernel.org/r/20200926102450.2966017-7-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor the storage struct of mlx4 GSI QP to be embedded in mlx4_ib
QP. This allows to remove internal memory allocation of QP struct which is
hidden inside the mlx4_ib_create_qp() flow.
Link: https://lore.kernel.org/r/20200926102450.2966017-6-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GSI QP doesn't need signal QP type because it is initialized statically to
zero, which is IB_SIGNAL_ALL_WR also wr->send_flags isn't set too. This
means that the GSI QP signal QP type can be removed.
Link: https://lore.kernel.org/r/20200926102450.2966017-5-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no reason to have separate create flow for the GSI QP, while
general create_qp routine has all needed checks and ability to allocate
and free the proper struct mlx5_ib_qp.
Link: https://lore.kernel.org/r/20200926102450.2966017-4-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove duplication of mlx5_ib_qp and mlx5_ib_gsi_qp fields. This change
returns the memory footprint of mlx5_ib QP to be as it was before
embedding GSI QP.
Link: https://lore.kernel.org/r/20200926102450.2966017-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The GSI QPs have different create flow from the regular QPs, but it is not
really needed. Update the code to use mlx5_ib_qp as a storage class for
all outside of GSI calls.
Link: https://lore.kernel.org/r/20200926102450.2966017-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sizeof() when applied to a pointer typed expression should give the size
of the pointed data, even if the data is a pointer.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Link: https://lore.kernel.org/r/20200917081354.2083293-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.
Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.
Fixes: 7b9bd73ed1 ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.com
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.
Fixes: ffb1308b88 ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.
Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.
Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.
Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.
Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sg_init_table() zeroes its first argument, so the allocation of that
argument doesn't have to.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(*x),flags)
...
sg_init_table(x,n)
// </smpl>
Link: https://lore.kernel.org/r/1600601186-7420-6-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Gal Pressman